Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ehci s5p-ehci: suspend root hub
- <6>[ 4912.727131] c2 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4912.727180] c2 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4912.801664] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4913.108466] c3 lsm330dlc_gyro_work_func, use last data(-128, 184, -52), status=0, selftest=0
- <4>[ 4913.443292] c2 lsm330dlc_gyro_work_func, use last data(16, 200, 36), status=0, selftest=0
- <6>[ 4916.565661] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4916.565765] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4916.565896] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4916.565950] c0 usb usb1: usb auto-resume
- <7>[ 4916.565991] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4916.591825] c0 hub 1-0:1.0: hub_resume
- <7>[ 4916.591971] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4916.592154] c0 usb 1-2: usb auto-resume
- <7>[ 4916.592258] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 4916.593505] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4916.626787] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4916.641787] c0 mif: usb_port_resume: 1283, 4
- <7>[ 4916.641869] c0 usb 1-2: finish resume
- <7>[ 4916.842699] c3 usb 1-2: usb auto-suspend
- <7>[ 4916.956743] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4916.956815] c3 usb usb1: bus auto-suspend
- <7>[ 4916.956860] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4916.957073] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4916.957126] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4917.577190] c1 max17047_get_soc: SOC(92, 9126 / 9821)
- <6>[ 4917.579268] c1 [317] bat: s(92, 22), v(4316, 98), t(52.6), cs(1, 1), cb(3), cr(999, 1000), t(2130)
- <4>[ 4917.584410] c3 healthd: max77693-charger: Unknown power supply type
- <4>[ 4917.585837] c3 healthd: battery [l=92 v=4316 t=52.6 h=2 st=2] c=0 dock-battery none chg=a
- <6>[ 4917.801659] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4919.428250] c1 lsm330dlc_gyro_work_func, use last data(78, 250, -67), status=0, selftest=0
- <4>[ 4920.113903] c0 lsm330dlc_gyro_work_func, use last data(-108, 237, -114), status=0, selftest=0
- <6>[ 4920.525476] c0 cm36651_work_func_light, red = 4476 green = 5402 blue = 3005 white = 6396
- <6>[ 4922.801655] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4923.133058] c0 lsm330dlc_gyro_work_func, use last data(206, -74, -25), status=0, selftest=0
- <6>[ 4923.203014] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 4923.203088] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
- <6>[ 4923.203234] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
- <6>[ 4923.203301] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[ 4923.203360] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
- <6>[ 4923.203867] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
- <4>[ 4923.208111] c0 lsm330dlc_gyro_work_func, use last data(-209, -13, 36), status=0, selftest=0
- <7>[ 4923.270504] c0 i2s_txctrl:Turn on
- <6>[ 4923.632228] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4923.632333] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4923.632500] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4923.632571] c0 usb usb1: usb auto-resume
- <7>[ 4923.632618] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4923.661733] c0 hub 1-0:1.0: hub_resume
- <7>[ 4923.661818] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4923.661933] c0 usb 1-2: usb auto-resume
- <7>[ 4923.661991] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 4923.663534] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4923.696760] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4923.711738] c0 mif: usb_port_resume: 1283, 4
- <7>[ 4923.711814] c0 usb 1-2: finish resume
- <7>[ 4923.912840] c3 usb 1-2: usb auto-suspend
- <7>[ 4924.026732] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4924.026821] c3 usb usb1: bus auto-suspend
- <7>[ 4924.026870] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4924.027859] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4924.027917] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 4926.293132] c0 lsm330dlc_gyro_work_func, use last data(-58, 63, -76), status=0, selftest=0
- <4>[ 4926.893778] c0 lsm330dlc_gyro_work_func, use last data(82, -238, -117), status=0, selftest=0
- <7>[ 4927.568980] c2 i2s_txctrl: Turn Off - spr is no active
- <6>[ 4927.569769] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 4927.569843] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 4927.801661] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 4928.108251] c0 lsm330dlc_gyro_work_func, use last data(44, -114, -76), status=0, selftest=0
- <4>[ 4929.393438] c0 lsm330dlc_gyro_work_func, use last data(369, -90, -127), status=0, selftest=0
- <4>[ 4929.658122] c0 lsm330dlc_gyro_work_func, use last data(239, -39, -41), status=0, selftest=0
- <6>[ 4932.101415] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4932.101507] c1 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4932.101666] c1 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4932.101713] c1 usb usb1: usb auto-resume
- <7>[ 4932.101746] c1 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4932.131736] c0 hub 1-0:1.0: hub_resume
- <7>[ 4932.131820] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4932.131911] c0 usb 1-2: usb auto-resume
- <7>[ 4932.131957] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 4932.133302] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4932.166739] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4932.181679] c0 mif: usb_port_resume: 1283, 4
- <7>[ 4932.181733] c0 usb 1-2: finish resume
- <7>[ 4932.382254] c3 usb 1-2: usb auto-suspend
- <7>[ 4932.496697] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4932.496758] c3 usb usb1: bus auto-suspend
- <7>[ 4932.496798] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4932.497806] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4932.497849] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4932.801658] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 4933.179675] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 4933.179733] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
- <6>[ 4933.179895] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
- <6>[ 4933.179963] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[ 4933.180015] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
- <6>[ 4933.180525] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
- <7>[ 4933.251399] c0 i2s_txctrl:Turn on
- <6>[ 4933.518406] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4933.518529] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4933.518671] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4933.518750] c0 usb usb1: usb auto-resume
- <7>[ 4933.518804] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4933.546714] c0 hub 1-0:1.0: hub_resume
- <7>[ 4933.546807] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4933.546932] c0 usb 1-2: usb auto-resume
- <7>[ 4933.546997] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 4933.548202] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4933.581769] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4933.596694] c0 mif: usb_port_resume: 1283, 4
- <7>[ 4933.596768] c0 usb 1-2: finish resume
- <7>[ 4933.797757] c3 usb 1-2: usb auto-suspend
- <7>[ 4933.911990] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4933.912081] c3 usb usb1: bus auto-suspend
- <7>[ 4933.912140] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4933.912888] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4933.912939] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4934.930688] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4934.930802] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4934.930934] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4934.930991] c0 usb usb1: usb auto-resume
- <7>[ 4934.931035] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4934.957032] c2 hub 1-0:1.0: hub_resume
- <7>[ 4934.957147] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4934.957279] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4934.957338] c2 usb 1-2: usb auto-resume
- <6>[ 4934.958606] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4934.991904] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4935.007110] c2 mif: usb_port_resume: 1283, 4
- <7>[ 4935.007202] c2 usb 1-2: finish resume
- <7>[ 4935.207447] c3 usb 1-2: usb auto-suspend
- <7>[ 4935.321706] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4935.321763] c3 usb usb1: bus auto-suspend
- <7>[ 4935.321798] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4935.322105] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4935.322145] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 4936.808232] c0 lsm330dlc_gyro_work_func, use last data(87, -23, 9), status=3, selftest=0
- <7>[ 4937.621731] c2 i2s_txctrl: Turn Off - spr is no active
- <6>[ 4937.622453] c2 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 4937.622509] c2 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 4937.801653] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 4939.167176] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4939.167248] c3 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4939.167362] c3 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4939.167400] c3 usb usb1: usb auto-resume
- <7>[ 4939.167436] c3 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4939.196697] c3 hub 1-0:1.0: hub_resume
- <7>[ 4939.196755] c3 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4939.196817] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4939.196853] c3 usb 1-2: usb auto-resume
- <6>[ 4939.198529] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4939.231673] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4939.246680] c3 mif: usb_port_resume: 1283, 4
- <7>[ 4939.246726] c3 usb 1-2: finish resume
- <7>[ 4939.448003] c3 usb 1-2: usb auto-suspend
- <7>[ 4939.561731] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4939.561800] c3 usb usb1: bus auto-suspend
- <7>[ 4939.561843] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4939.562499] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4939.562552] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 4940.098179] c0 lsm330dlc_gyro_work_func, use last data(12, 23, -73), status=0, selftest=0
- <6>[ 4940.158275] c1 binder: undelivered transaction 5404734
- <6>[ 4940.455713] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4940.460093] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4940.461198] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4940.463945] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4940.465003] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4940.465793] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4940.574857] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4940.574964] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4940.575093] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4940.575148] c0 usb usb1: usb auto-resume
- <7>[ 4940.575189] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4940.601777] c2 hub 1-0:1.0: hub_resume
- <7>[ 4940.601876] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4940.602022] c2 usb 1-2: usb auto-resume
- <7>[ 4940.602857] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 4940.603322] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4940.636829] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4940.651893] c2 mif: usb_port_resume: 1283, 4
- <7>[ 4940.651980] c2 usb 1-2: finish resume
- <7>[ 4940.853315] c2 usb 1-2: usb auto-suspend
- <7>[ 4940.966711] c2 hub 1-0:1.0: hub_suspend
- <7>[ 4940.966773] c2 usb usb1: bus auto-suspend
- <7>[ 4940.966813] c2 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4940.967262] c2 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4940.967308] c2 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4942.801661] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4943.103059] c0 lsm330dlc_gyro_work_func, use last data(143, -28, 3), status=1, selftest=0
- <6>[ 4943.404482] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4943.404779] c3 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4943.404911] c3 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4943.404966] c3 usb usb1: usb auto-resume
- <7>[ 4943.405008] c3 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4943.431726] c3 hub 1-0:1.0: hub_resume
- <7>[ 4943.431811] c3 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4943.431921] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4943.431968] c3 usb 1-2: usb auto-resume
- <6>[ 4943.433108] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4943.466754] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4943.481700] c3 mif: usb_port_resume: 1283, 4
- <7>[ 4943.481778] c3 usb 1-2: finish resume
- <7>[ 4943.682698] c3 usb 1-2: usb auto-suspend
- <7>[ 4943.796787] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4943.796855] c3 usb usb1: bus auto-suspend
- <7>[ 4943.796898] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4943.797085] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4943.797132] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 4946.153495] c0 lsm330dlc_gyro_work_func, use last data(160, -80, -158), status=0, selftest=0
- <6>[ 4947.615794] c3 max17047_get_soc: SOC(93, 9137 / 9821)
- <6>[ 4947.619627] c3 [318] bat: s(93, 11), v(4331, 111), t(52.1), cs(1, 1), cb(3), cr(999, 1000), t(2160)
- <6>[ 4947.619757] c3 battery_monitor_work: update wakelock(200)
- <4>[ 4947.627438] c3 healthd: max77693-charger: Unknown power supply type
- <4>[ 4947.629771] c3 healthd: battery [l=93 v=4331 t=52.1 h=2 st=2] c=0 dock-battery none chg=a
- <6>[ 4947.801658] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4948.308193] c0 lsm330dlc_gyro_work_func, use last data(197, -2, -1), status=0, selftest=0
- <6>[ 4950.466910] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4950.471900] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4950.472941] c3 [BT] bt_lpm_exit_lpm_locked.
- <4>[ 4951.073503] c0 lsm330dlc_gyro_work_func, use last data(144, 63, -106), status=0, selftest=0
- <6>[ 4951.525046] c1 cm36651_work_func_light, red = 3406 green = 4296 blue = 2444 white = 5148
- <6>[ 4952.801695] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 4953.128397] c2 lsm330dlc_gyro_work_func, use last data(234, 12, -38), status=0, selftest=0
- <4>[ 4954.408824] c0 lsm330dlc_gyro_work_func, use last data(61, 84, 33), status=0, selftest=0
- <6>[ 4957.801664] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 4959.953273] c2 lsm330dlc_gyro_work_func, use last data(91, 70, -55), status=0, selftest=0
- <6>[ 4962.801660] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4965.893154] c0 lsm330dlc_gyro_work_func, use last data(-157, 57, -76), status=0, selftest=0
- <6>[ 4967.801660] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 4972.801662] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 4973.062972] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4973.063152] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4973.063323] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4973.063440] c0 usb usb1: usb auto-resume
- <7>[ 4973.063515] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4973.091736] c3 hub 1-0:1.0: hub_resume
- <7>[ 4973.091846] c3 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4973.091983] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4973.092045] c3 usb 1-2: usb auto-resume
- <6>[ 4973.093274] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4973.126781] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <4>[ 4973.139249] c0 lsm330dlc_gyro_work_func, use last data(-37, -141, -78), status=1, selftest=0
- <6>[ 4973.143719] c3 mif: usb_port_resume: 1283, 4
- <7>[ 4973.143793] c3 usb 1-2: finish resume
- <7>[ 4973.342253] c0 usb 1-2: usb auto-suspend
- <7>[ 4973.456792] c0 hub 1-0:1.0: hub_suspend
- <7>[ 4973.456857] c0 usb usb1: bus auto-suspend
- <7>[ 4973.456896] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4973.457677] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4973.457897] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4977.801641] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 4978.707534] c1 max17047_get_soc: SOC(93, 9158 / 9821)
- <6>[ 4978.710117] c1 [319] bat: s(93, 21), v(4330, 108), t(52.0), cs(1, 1), cb(3), cr(999, 1000), t(2191)
- <4>[ 4978.717016] c1 healthd: max77693-charger: Unknown power supply type
- <4>[ 4978.720383] c1 healthd: battery [l=93 v=4330 t=52.0 h=2 st=2] c=0 dock-battery none chg=a
- <4>[ 4979.313104] c3 lsm330dlc_gyro_work_func, use last data(-76, 76, 33), status=0, selftest=0
- <6>[ 4980.535348] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4980.539780] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4980.541034] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4980.543681] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4980.544567] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4980.545487] c3 [BT] bt_lpm_exit_lpm_locked.
- <4>[ 4981.094035] c1 lsm330dlc_gyro_work_func, use last data(124, 270, -42), status=0, selftest=0
- <6>[ 4982.525523] c0 cm36651_work_func_light, red = 4238 green = 5035 blue = 2867 white = 5816
- <6>[ 4982.801655] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4982.948228] c3 lsm330dlc_gyro_work_func, use last data(49, -232, -63), status=0, selftest=0
- <4>[ 4984.118205] c0 lsm330dlc_gyro_work_func, use last data(-199, -75, 43), status=0, selftest=0
- <6>[ 4985.773700] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4985.773842] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4985.773977] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4985.774037] c0 usb usb1: usb auto-resume
- <7>[ 4985.774083] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4985.801748] c1 hub 1-0:1.0: hub_resume
- <7>[ 4985.801859] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4985.801963] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4985.802010] c1 usb 1-2: usb auto-resume
- <6>[ 4985.803093] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4985.836818] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4985.851955] c1 mif: usb_port_resume: 1283, 4
- <7>[ 4985.852051] c1 usb 1-2: finish resume
- <7>[ 4986.055286] c1 usb 1-2: usb auto-suspend
- <7>[ 4986.168311] c1 hub 1-0:1.0: hub_suspend
- <7>[ 4986.168401] c1 usb usb1: bus auto-suspend
- <7>[ 4986.168457] c1 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4986.169173] c1 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4986.169244] c1 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4987.186006] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4987.186942] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4987.187069] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4987.187118] c0 usb usb1: usb auto-resume
- <7>[ 4987.187155] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4987.216680] c0 hub 1-0:1.0: hub_resume
- <7>[ 4987.216735] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4987.216799] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4987.216832] c0 usb 1-2: usb auto-resume
- <6>[ 4987.218166] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4987.252176] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4987.266678] c3 mif: usb_port_resume: 1283, 4
- <7>[ 4987.266734] c3 usb 1-2: finish resume
- <7>[ 4987.467460] c0 usb 1-2: usb auto-suspend
- <7>[ 4987.581737] c0 hub 1-0:1.0: hub_suspend
- <7>[ 4987.581801] c0 usb usb1: bus auto-suspend
- <7>[ 4987.581837] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4987.582237] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4987.582279] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4987.801659] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 4988.598285] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4988.598383] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4988.598512] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4988.598564] c0 usb usb1: usb auto-resume
- <7>[ 4988.598604] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4988.626717] c1 hub 1-0:1.0: hub_resume
- <7>[ 4988.626805] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4988.626913] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4988.626961] c1 usb 1-2: usb auto-resume
- <6>[ 4988.628189] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4988.661731] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4988.676708] c2 mif: usb_port_resume: 1283, 4
- <7>[ 4988.676779] c2 usb 1-2: finish resume
- <7>[ 4988.877677] c3 usb 1-2: usb auto-suspend
- <7>[ 4988.991734] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4988.991813] c3 usb usb1: bus auto-suspend
- <7>[ 4988.991862] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4988.992683] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4988.992756] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4990.010608] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4990.010720] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4990.010849] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4990.010903] c0 usb usb1: usb auto-resume
- <7>[ 4990.010943] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4990.036826] c0 hub 1-0:1.0: hub_resume
- <7>[ 4990.036962] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4990.037119] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 4990.037172] c0 usb 1-2: usb auto-resume
- <6>[ 4990.038420] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4990.071822] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4990.086744] c0 mif: usb_port_resume: 1283, 4
- <7>[ 4990.086855] c0 usb 1-2: finish resume
- <4>[ 4990.119418] c0 lsm330dlc_gyro_work_func, use last data(23, -138, 14), status=0, selftest=0
- <7>[ 4990.287802] c3 usb 1-2: usb auto-suspend
- <4>[ 4990.308113] c3 lsm330dlc_gyro_work_func, use last data(46, 2, 0), status=0, selftest=0
- <7>[ 4990.401745] c3 hub 1-0:1.0: hub_suspend
- <7>[ 4990.401823] c3 usb usb1: bus auto-suspend
- <7>[ 4990.401880] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4990.402023] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4990.402080] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 4990.478645] c0 lsm330dlc_gyro_work_func, use last data(3, 33, 18), status=0, selftest=0
- <6>[ 4990.548968] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4990.554083] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4990.555048] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 4991.422933] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 4991.423081] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 4991.423250] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 4991.423318] c0 usb usb1: usb auto-resume
- <7>[ 4991.423367] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 4991.451695] c0 hub 1-0:1.0: hub_resume
- <7>[ 4991.451790] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 4991.451912] c0 usb 1-2: usb auto-resume
- <7>[ 4991.452664] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 4991.453013] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 4991.486762] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 4991.501786] c0 mif: usb_port_resume: 1283, 4
- <7>[ 4991.501867] c0 usb 1-2: finish resume
- <7>[ 4991.702729] c0 usb 1-2: usb auto-suspend
- <7>[ 4991.816701] c0 hub 1-0:1.0: hub_suspend
- <7>[ 4991.816763] c0 usb usb1: bus auto-suspend
- <7>[ 4991.816802] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 4991.817478] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 4991.817526] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 4992.801657] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 4993.113257] c0 lsm330dlc_gyro_work_func, use last data(-135, -57, -56), status=3, selftest=0
- <4>[ 4993.188118] c2 lsm330dlc_gyro_work_func, use last data(124, 341, -105), status=0, selftest=0
- <4>[ 4994.118006] c0 lsm330dlc_gyro_work_func, use last data(56, 135, -179), status=0, selftest=0
- <4>[ 4994.958819] c0 lsm330dlc_gyro_work_func, use last data(177, -43, -139), status=0, selftest=0
- <4>[ 4995.164892] c2 lsm330dlc_gyro_work_func, use last data(-28, 162, 51), status=0, selftest=0
- <4>[ 4997.198084] c0 lsm330dlc_gyro_work_func, use last data(-20, 6, -101), status=0, selftest=0
- <6>[ 4997.801656] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 5001.163048] c0 lsm330dlc_gyro_work_func, use last data(-57, -108, 9), status=0, selftest=0
- <4>[ 5001.993313] c3 lsm330dlc_gyro_work_func, use last data(27, 152, -70), status=0, selftest=0
- <4>[ 5002.110615] c0 lsm330dlc_gyro_work_func, use last data(167, -85, -81), status=0, selftest=0
- <6>[ 5002.801688] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 5002.803241] c2 lsm330dlc_gyro_work_func, use last data(283, -3, 43), status=0, selftest=0
- <4>[ 5003.093481] c0 lsm330dlc_gyro_work_func, use last data(-285, -417, -187), status=0, selftest=0
- <4>[ 5003.633043] c0 lsm330dlc_gyro_work_func, use last data(254, -145, 7), status=1, selftest=0
- <6>[ 5006.087568] c0 lcd panel: brightness=221, bl=28, candela=220
- <6>[ 5006.958266] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5006.958361] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5006.958473] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5006.958505] c0 usb usb1: usb auto-resume
- <7>[ 5006.958528] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5006.986672] c0 hub 1-0:1.0: hub_resume
- <7>[ 5006.986720] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5006.986787] c0 usb 1-2: usb auto-resume
- <7>[ 5006.986835] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5006.988096] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5007.021747] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5007.036694] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5007.036823] c0 usb 1-2: finish resume
- <7>[ 5007.237142] c3 usb 1-2: usb auto-suspend
- <7>[ 5007.351720] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5007.351773] c3 usb usb1: bus auto-suspend
- <7>[ 5007.351806] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5007.352645] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5007.352692] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5007.801641] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 5008.370645] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5008.370802] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5008.370957] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5008.371034] c0 usb usb1: usb auto-resume
- <7>[ 5008.371085] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5008.396722] c0 hub 1-0:1.0: hub_resume
- <7>[ 5008.396807] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5008.396946] c0 usb 1-2: usb auto-resume
- <7>[ 5008.397007] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5008.398208] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5008.431766] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5008.446768] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5008.446843] c0 usb 1-2: finish resume
- <4>[ 5008.533036] c0 lsm330dlc_gyro_work_func, use last data(-11, 28, -97), status=0, selftest=0
- <7>[ 5008.647398] c3 usb 1-2: usb auto-suspend
- <6>[ 5008.725468] c0 max17047_get_soc: SOC(93, 9169 / 9821)
- <6>[ 5008.729998] c0 battery_interval_calulation: raw soc(9198), weight(90)
- <6>[ 5008.730053] c0 battery_interval_calulation: weight(90)
- <6>[ 5008.730099] c0 battery_monitor_interval: apply weight(90), 30 -> 27
- <6>[ 5008.730160] c0 [320] bat: s(93, 11), v(4333, 109), t(52.5), cs(1, 1), cb(3), cr(999, 1000), t(2221)
- <4>[ 5008.738800] c3 healthd: max77693-charger: Unknown power supply type
- <4>[ 5008.740796] c3 healthd: battery [l=93 v=4333 t=52.5 h=2 st=2] c=0 dock-battery none chg=a
- <7>[ 5008.761761] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5008.761829] c3 usb usb1: bus auto-suspend
- <7>[ 5008.761869] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5008.762172] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5008.762218] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5009.113620] c0 lsm330dlc_gyro_work_func, use last data(329, 262, -110), status=0, selftest=0
- <4>[ 5010.073245] c0 lsm330dlc_gyro_work_func, use last data(177, -21, 0), status=0, selftest=0
- <6>[ 5012.801650] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 5013.525200] c0 cm36651_work_func_light, red = 2119 green = 2934 blue = 1612 white = 3425
- <4>[ 5015.118091] c2 lsm330dlc_gyro_work_func, use last data(159, 254, -30), status=0, selftest=0
- <4>[ 5016.158463] c0 lsm330dlc_gyro_work_func, use last data(25, 243, 14), status=0, selftest=0
- <4>[ 5017.328549] c0 lsm330dlc_gyro_work_func, use last data(-119, 63, -51), status=0, selftest=0
- <6>[ 5017.801638] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 5018.256709] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5018.256785] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5018.256906] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5018.256942] c0 usb usb1: usb auto-resume
- <7>[ 5018.256969] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5018.287008] c0 hub 1-0:1.0: hub_resume
- <7>[ 5018.287058] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5018.287127] c0 usb 1-2: usb auto-resume
- <7>[ 5018.287160] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5018.288505] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5018.321681] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5018.336699] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5018.336748] c1 usb 1-2: finish resume
- <7>[ 5018.537799] c3 usb 1-2: usb auto-suspend
- <7>[ 5018.651736] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5018.651821] c3 usb usb1: bus auto-suspend
- <7>[ 5018.651865] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5018.652042] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5018.652102] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5019.669031] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5019.669701] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5019.669842] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5019.669907] c0 usb usb1: usb auto-resume
- <7>[ 5019.669959] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5019.696699] c0 hub 1-0:1.0: hub_resume
- <7>[ 5019.696778] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5019.696890] c0 usb 1-2: usb auto-resume
- <7>[ 5019.696949] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5019.698040] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5019.731788] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5019.746758] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5019.746836] c0 usb 1-2: finish resume
- <7>[ 5019.947504] c3 usb 1-2: usb auto-suspend
- <7>[ 5020.061718] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5020.061784] c3 usb usb1: bus auto-suspend
- <7>[ 5020.061828] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5020.062042] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5020.062092] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5020.628756] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5020.633269] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5020.634246] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5020.637243] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5020.638371] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5020.639355] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5022.801655] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 5027.801671] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 5028.753147] c0 lsm330dlc_gyro_work_func, use last data(52, 203, -202), status=0, selftest=0
- <4>[ 5029.136055] c0 lsm330dlc_gyro_work_func, use last data(47, -31, -52), status=0, selftest=0
- <6>[ 5030.642160] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5030.647348] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5030.648443] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5030.967072] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5030.967183] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5030.967373] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5030.967454] c0 usb usb1: usb auto-resume
- <7>[ 5030.967497] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5030.996719] c1 hub 1-0:1.0: hub_resume
- <7>[ 5030.996806] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5030.996916] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5030.996970] c1 usb 1-2: usb auto-resume
- <6>[ 5030.998625] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5031.031729] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5031.046728] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5031.046798] c1 usb 1-2: finish resume
- <7>[ 5031.247535] c3 usb 1-2: usb auto-suspend
- <7>[ 5031.362415] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5031.362495] c3 usb usb1: bus auto-suspend
- <7>[ 5031.362547] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5031.363577] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5031.363628] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5032.801671] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 5033.358273] c0 lsm330dlc_gyro_work_func, use last data(-155, 162, -102), status=0, selftest=0
- <4>[ 5033.633125] c2 lsm330dlc_gyro_work_func, use last data(173, 63, -139), status=0, selftest=0
- <6>[ 5033.922176] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: SIOP_LEVEL=3
- <6>[ 5033.922260] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=520
- <6>[ 5037.643148] c1 max17047_get_soc: SOC(93, 9191 / 9821)
- <6>[ 5037.645966] c1 [321] bat: s(93, 22), v(4333, 107), t(52.3), cs(1, 1), cb(3), cr(999, 1000), t(2250)
- <4>[ 5037.658629] c3 healthd: max77693-charger: Unknown power supply type
- <4>[ 5037.665273] c3 healthd: battery [l=93 v=4333 t=52.3 h=2 st=2] c=0 dock-battery none chg=a
- <4>[ 5037.698241] c0 lsm330dlc_gyro_work_func, use last data(-122, -32, -2), status=0, selftest=0
- <6>[ 5037.801646] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 5037.846374] c0 logger_release: took 0 msec
- <6>[ 5039.441342] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5039.441436] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5039.441561] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5039.441608] c0 usb usb1: usb auto-resume
- <7>[ 5039.441707] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5039.471736] c0 hub 1-0:1.0: hub_resume
- <7>[ 5039.471826] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5039.471946] c0 usb 1-2: usb auto-resume
- <7>[ 5039.472010] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5039.473315] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5039.506844] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5039.521731] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5039.521812] c0 usb 1-2: finish resume
- <7>[ 5039.727359] c0 usb 1-2: usb auto-suspend
- <7>[ 5039.841749] c0 hub 1-0:1.0: hub_suspend
- <7>[ 5039.841844] c0 usb usb1: bus auto-suspend
- <7>[ 5039.841902] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5039.842819] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5039.842902] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5040.108329] c0 lsm330dlc_gyro_work_func, use last data(199, -28, -12), status=3, selftest=0
- <6>[ 5042.801672] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 5043.678116] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5043.678348] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5043.678496] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5043.678563] c0 usb usb1: usb auto-resume
- <7>[ 5043.678610] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5043.706729] c0 hub 1-0:1.0: hub_resume
- <7>[ 5043.706814] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5043.706926] c0 usb 1-2: usb auto-resume
- <7>[ 5043.706986] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5043.708211] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5043.741751] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5043.756774] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5043.756851] c0 usb 1-2: finish resume
- <7>[ 5043.957809] c3 usb 1-2: usb auto-suspend
- <7>[ 5044.071713] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5044.071792] c3 usb usb1: bus auto-suspend
- <7>[ 5044.071837] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5044.072705] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5044.072759] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5044.525250] c0 cm36651_work_func_light, red = 3920 green = 4840 blue = 2592 white = 5508
- <4>[ 5045.803259] c0 lsm330dlc_gyro_work_func, use last data(-799, -2, 19), status=0, selftest=0
- <6>[ 5046.502856] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5046.503077] c2 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5046.503214] c2 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5046.503282] c2 usb usb1: usb auto-resume
- <7>[ 5046.503331] c2 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5046.531705] c2 hub 1-0:1.0: hub_resume
- <7>[ 5046.531789] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5046.531897] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5046.531946] c2 usb 1-2: usb auto-resume
- <6>[ 5046.533080] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5046.566763] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5046.581726] c2 mif: usb_port_resume: 1283, 4
- <7>[ 5046.581810] c2 usb 1-2: finish resume
- <7>[ 5046.782697] c3 usb 1-2: usb auto-suspend
- <7>[ 5046.896746] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5046.896815] c3 usb usb1: bus auto-suspend
- <7>[ 5046.896858] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5046.897420] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5046.897477] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5047.313375] c0 lsm330dlc_gyro_work_func, use last data(222, -61, 6), status=0, selftest=0
- <6>[ 5047.801672] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 5047.915144] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5047.915250] c1 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5047.915383] c1 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5047.915441] c1 usb usb1: usb auto-resume
- <7>[ 5047.915482] c1 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5047.941831] c1 hub 1-0:1.0: hub_resume
- <7>[ 5047.941987] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5047.942194] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5047.942283] c1 usb 1-2: usb auto-resume
- <6>[ 5047.943318] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5047.976836] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5047.991694] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5047.991767] c1 usb 1-2: finish resume
- <7>[ 5048.192845] c3 usb 1-2: usb auto-suspend
- <7>[ 5048.306918] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5048.306970] c3 usb usb1: bus auto-suspend
- <7>[ 5048.307005] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5048.307546] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5048.307587] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5049.038415] c2 lsm330dlc_gyro_work_func, use last data(-110, 51, -20), status=0, selftest=0
- <6>[ 5049.327457] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5049.327595] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5049.327763] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5049.327823] c0 usb usb1: usb auto-resume
- <7>[ 5049.327866] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5049.356750] c1 hub 1-0:1.0: hub_resume
- <7>[ 5049.356840] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5049.356963] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5049.357016] c1 usb 1-2: usb auto-resume
- <6>[ 5049.358595] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5049.391790] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5049.406734] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5049.406829] c1 usb 1-2: finish resume
- <7>[ 5049.608189] c1 usb 1-2: usb auto-suspend
- <7>[ 5049.721719] c1 hub 1-0:1.0: hub_suspend
- <7>[ 5049.721786] c1 usb usb1: bus auto-suspend
- <7>[ 5049.721825] c1 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5049.721942] c1 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5049.721991] c1 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5050.861276] c2 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 5050.861316] c2 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
- <6>[ 5050.861435] c2 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
- <6>[ 5050.861484] c2 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[ 5050.861521] c2 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
- <6>[ 5050.862043] c2 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
- <7>[ 5050.930297] c0 i2s_txctrl:Turn on
- <6>[ 5052.801666] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 5053.564379] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5053.566076] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5053.566211] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5053.566267] c0 usb usb1: usb auto-resume
- <7>[ 5053.566305] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5053.592485] c0 hub 1-0:1.0: hub_resume
- <7>[ 5053.592679] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5053.592888] c0 usb 1-2: usb auto-resume
- <7>[ 5053.592979] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <4>[ 5053.593750] c1 lsm330dlc_gyro_work_func, use last data(183, -60, 46), status=0, selftest=0
- <6>[ 5053.594161] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5053.626822] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5053.641696] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5053.641767] c0 usb 1-2: finish resume
- <7>[ 5053.842628] c3 usb 1-2: usb auto-suspend
- <7>[ 5053.956809] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5053.956872] c3 usb usb1: bus auto-suspend
- <7>[ 5053.956904] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5053.957379] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5053.957437] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5054.120893] c0 lsm330dlc_gyro_work_func, use last data(-302, 157, -3), status=0, selftest=0
- <4>[ 5055.123251] c0 lsm330dlc_gyro_work_func, use last data(93, 13, -52), status=0, selftest=0
- <4>[ 5056.303497] c0 lsm330dlc_gyro_work_func, use last data(7, 125, -161), status=0, selftest=0
- <7>[ 5056.976734] c3 i2s_txctrl: Turn Off - spr is no active
- <6>[ 5056.977503] c3 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 5056.977569] c3 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 5057.801682] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 5058.108718] c0 lsm330dlc_gyro_work_func, use last data(194, -77, -6), status=0, selftest=0
- <4>[ 5059.134035] c0 lsm330dlc_gyro_work_func, use last data(662, 114, -350), status=0, selftest=0
- <4>[ 5060.403105] c2 lsm330dlc_gyro_work_func, use last data(-101, 142, -85), status=0, selftest=0
- <6>[ 5060.718927] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5060.724255] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5060.725586] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5060.729868] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5060.730806] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5060.732098] c3 [BT] bt_lpm_exit_lpm_locked.
- <4>[ 5061.128121] c0 lsm330dlc_gyro_work_func, use last data(-81, 16, -19), status=0, selftest=0
- <4>[ 5062.458492] c0 lsm330dlc_gyro_work_func, use last data(4, -12, -47), status=0, selftest=0
- <6>[ 5062.801669] c0 pet_watchdog_timer_fn kicking...be65
- <4>[ 5063.116197] c0 lsm330dlc_gyro_work_func, use last data(113, 37, -28), status=0, selftest=0
- <4>[ 5063.843273] c2 lsm330dlc_gyro_work_func, use last data(471, 25, -145), status=0, selftest=0
- <4>[ 5063.939197] c0 lsm330dlc_gyro_work_func, use last data(13, -199, -1), status=0, selftest=0
- <6>[ 5064.004515] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=530
- <4>[ 5064.903442] c2 lsm330dlc_gyro_work_func, use last data(121, 44, -28), status=0, selftest=0
- <6>[ 5066.274988] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5066.275072] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5066.275198] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5066.275245] c0 usb usb1: usb auto-resume
- <7>[ 5066.275278] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5066.301717] c3 hub 1-0:1.0: hub_resume
- <7>[ 5066.301791] c3 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5066.301927] c3 usb 1-2: usb auto-resume
- <7>[ 5066.301994] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5066.303139] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5066.336745] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5066.351786] c3 mif: usb_port_resume: 1283, 4
- <7>[ 5066.351871] c3 usb 1-2: finish resume
- <7>[ 5066.554970] c3 usb 1-2: usb auto-suspend
- <7>[ 5066.666750] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5066.666816] c3 usb usb1: bus auto-suspend
- <7>[ 5066.666857] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5066.667345] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5066.667391] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5067.687506] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5067.687684] c1 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5067.687844] c1 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5067.687900] c1 usb usb1: usb auto-resume
- <7>[ 5067.687942] c1 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5067.716736] c1 hub 1-0:1.0: hub_resume
- <7>[ 5067.716821] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5067.716939] c1 usb 1-2: usb auto-resume
- <7>[ 5067.717003] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5067.718605] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5067.751911] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5067.766704] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5067.766794] c1 usb 1-2: finish resume
- <6>[ 5067.801658] c0 pet_watchdog_timer_fn kicking...be66
- <7>[ 5067.968344] c3 usb 1-2: usb auto-suspend
- <7>[ 5068.081685] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5068.081728] c3 usb usb1: bus auto-suspend
- <7>[ 5068.081754] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5068.082006] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5068.082038] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5069.868981] c3 max17047_get_soc: SOC(93, 9202 / 9821)
- <6>[ 5069.872903] c3 [322] bat: s(93, 11), v(4330, 102), t(51.8), cs(1, 1), cb(3), cr(999, 1000), t(2282)
- <4>[ 5069.880430] c3 healthd: max77693-charger: Unknown power supply type
- <4>[ 5069.882701] c3 healthd: battery [l=93 v=4330 t=51.8 h=2 st=2] c=0 dock-battery none chg=a
- <4>[ 5070.145091] c2 lsm330dlc_gyro_work_func, use last data(-99, 50, 50), status=0, selftest=0
- <6>[ 5070.729311] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5070.734439] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5070.735484] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5071.924541] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5071.924725] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5071.924886] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5071.924981] c0 usb usb1: usb auto-resume
- <7>[ 5071.925049] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5071.951915] c0 hub 1-0:1.0: hub_resume
- <7>[ 5071.952036] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5071.952181] c0 usb 1-2: usb auto-resume
- <7>[ 5071.952836] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5071.953465] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5071.986717] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5072.002091] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5072.002152] c0 usb 1-2: finish resume
- <7>[ 5072.203594] c3 usb 1-2: usb auto-suspend
- <7>[ 5072.316709] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5072.316774] c3 usb usb1: bus auto-suspend
- <7>[ 5072.316825] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5072.317149] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5072.317200] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5072.801666] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 5074.309034] c0 lsm330dlc_gyro_work_func, use last data(140, -550, -105), status=3, selftest=0
- <6>[ 5074.748799] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5074.748902] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5074.749031] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5074.749083] c0 usb usb1: usb auto-resume
- <7>[ 5074.749123] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5074.776720] c0 hub 1-0:1.0: hub_resume
- <7>[ 5074.776812] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5074.776928] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5074.776979] c0 usb 1-2: usb auto-resume
- <6>[ 5074.778023] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <4>[ 5074.793813] c0 lsm330dlc_gyro_work_func, use last data(67, -683, -29), status=0, selftest=0
- <7>[ 5074.811762] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5074.826696] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5074.826763] c0 usb 1-2: finish resume
- <4>[ 5074.878145] c0 lsm330dlc_gyro_work_func, use last data(98, -696, -71), status=3, selftest=0
- <7>[ 5075.027266] c3 usb 1-2: usb auto-suspend
- <7>[ 5075.146690] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5075.146734] c3 usb usb1: bus auto-suspend
- <7>[ 5075.146759] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5075.147189] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5075.147220] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5075.248363] c3 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 5075.248410] c3 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
- <6>[ 5075.248543] c3 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
- <6>[ 5075.248595] c3 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[ 5075.248640] c3 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
- <6>[ 5075.249131] c3 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
- <7>[ 5075.315953] c0 i2s_txctrl:Turn on
- <6>[ 5075.524936] c0 cm36651_work_func_light, red = 4184 green = 4982 blue = 2832 white = 5820
- <4>[ 5076.133161] c3 lsm330dlc_gyro_work_func, use last data(284, -592, -110), status=0, selftest=0
- <4>[ 5076.163418] c0 lsm330dlc_gyro_work_func, use last data(262, -571, -156), status=0, selftest=0
- <6>[ 5077.573424] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5077.573546] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5077.573683] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5077.573747] c0 usb usb1: usb auto-resume
- <7>[ 5077.573798] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5077.601730] c2 hub 1-0:1.0: hub_resume
- <7>[ 5077.601846] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5077.601961] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5077.602014] c2 usb 1-2: usb auto-resume
- <6>[ 5077.603258] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5077.636757] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5077.651717] c2 mif: usb_port_resume: 1283, 4
- <7>[ 5077.651812] c2 usb 1-2: finish resume
- <6>[ 5077.801663] c0 pet_watchdog_timer_fn kicking...be66
- <7>[ 5077.853134] c3 usb 1-2: usb auto-suspend
- <7>[ 5077.966722] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5077.966788] c3 usb usb1: bus auto-suspend
- <7>[ 5077.966827] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5077.967888] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5077.967935] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5078.985748] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5078.985900] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5078.986042] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5078.986120] c0 usb usb1: usb auto-resume
- <7>[ 5078.986175] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5079.011682] c0 hub 1-0:1.0: hub_resume
- <7>[ 5079.011739] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5079.011821] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5079.011864] c0 usb 1-2: usb auto-resume
- <6>[ 5079.013202] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5079.046692] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5079.061669] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5079.061721] c0 usb 1-2: finish resume
- <4>[ 5079.158644] c0 lsm330dlc_gyro_work_func, use last data(-222, -747, 9), status=0, selftest=0
- <7>[ 5079.262404] c2 usb 1-2: usb auto-suspend
- <7>[ 5079.376749] c2 hub 1-0:1.0: hub_suspend
- <7>[ 5079.376845] c2 usb usb1: bus auto-suspend
- <7>[ 5079.376887] c2 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5079.377284] c2 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5079.377357] c2 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5080.128142] c3 lsm330dlc_gyro_work_func, use last data(292, -359, -128), status=0, selftest=0
- <6>[ 5080.584902] c0 lcd panel: brightness=219, bl=27, candela=210
- <6>[ 5081.019946] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5081.020601] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5081.020729] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5081.020780] c0 usb usb1: usb auto-resume
- <7>[ 5081.020809] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5081.046660] c1 hub 1-0:1.0: hub_resume
- <7>[ 5081.046711] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5081.046776] c1 usb 1-2: usb auto-resume
- <7>[ 5081.046813] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5081.048109] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5081.081714] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5081.096689] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5081.096738] c1 usb 1-2: finish resume
- <7>[ 5081.322596] c1 usb 1-2: usb auto-suspend
- <7>[ 5081.437531] c1 hub 1-0:1.0: hub_suspend
- <7>[ 5081.437603] c1 usb usb1: bus auto-suspend
- <7>[ 5081.437654] c1 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5081.437886] c1 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5081.437943] c1 s5p_ehci_runtime_suspend: usage=0, child=0
- <7>[ 5081.937095] c3 i2s_txctrl: Turn Off - spr is no active
- <6>[ 5081.937919] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
- <6>[ 5081.937989] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
- <4>[ 5082.123036] c0 lsm330dlc_gyro_work_func, use last data(282, 137, 25), status=0, selftest=0
- <6>[ 5082.801665] c0 pet_watchdog_timer_fn kicking...be65
- <6>[ 5084.634872] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5084.635007] c2 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5084.635163] c2 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5084.635232] c2 usb usb1: usb auto-resume
- <7>[ 5084.635278] c2 s5p-ehci s5p-ehci: resume root hub
- <6>[ 5084.653761] c0 lcd panel: brightness=209, bl=26, candela=200
- <7>[ 5084.661720] c2 hub 1-0:1.0: hub_resume
- <7>[ 5084.661810] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5084.661919] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5084.661973] c2 usb 1-2: usb auto-resume
- <6>[ 5084.663182] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5084.696727] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5084.711916] c2 mif: usb_port_resume: 1283, 4
- <7>[ 5084.711998] c2 usb 1-2: finish resume
- <7>[ 5084.912694] c2 usb 1-2: usb auto-suspend
- <7>[ 5085.026682] c2 hub 1-0:1.0: hub_suspend
- <7>[ 5085.026730] c2 usb usb1: bus auto-suspend
- <7>[ 5085.026759] c2 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5085.027348] c2 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5085.027379] c2 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5085.133974] c0 lsm330dlc_gyro_work_func, use last data(70, 45, 63), status=0, selftest=0
- <6>[ 5086.047015] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5086.047080] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5086.047195] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5086.047234] c0 usb usb1: usb auto-resume
- <7>[ 5086.047261] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5086.076735] c0 hub 1-0:1.0: hub_resume
- <7>[ 5086.076838] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5086.077034] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5086.077127] c0 usb 1-2: usb auto-resume
- <6>[ 5086.078699] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5086.111766] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5086.126907] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5086.126963] c0 usb 1-2: finish resume
- <7>[ 5086.328187] c3 usb 1-2: usb auto-suspend
- <7>[ 5086.441807] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5086.441870] c3 usb usb1: bus auto-suspend
- <7>[ 5086.441911] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5086.442325] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5086.442372] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5087.459325] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5087.459489] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5087.459620] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5087.459677] c0 usb usb1: usb auto-resume
- <7>[ 5087.459969] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5087.486770] c1 hub 1-0:1.0: hub_resume
- <7>[ 5087.486881] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5087.487039] c1 usb 1-2: usb auto-resume
- <7>[ 5087.487091] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5087.488302] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5087.521748] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5087.536738] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5087.536810] c1 usb 1-2: finish resume
- <7>[ 5087.737721] c1 usb 1-2: usb auto-suspend
- <6>[ 5087.801662] c0 pet_watchdog_timer_fn kicking...be65
- <7>[ 5087.851842] c1 hub 1-0:1.0: hub_suspend
- <7>[ 5087.851920] c1 usb usb1: bus auto-suspend
- <7>[ 5087.851970] c1 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5087.853160] c1 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5087.853214] c1 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5092.801665] c0 pet_watchdog_timer_fn kicking...be66
- <4>[ 5093.109051] c0 lsm330dlc_gyro_work_func, use last data(-222, -47, 27), status=0, selftest=0
- <6>[ 5094.604143] c0 lcd panel: brightness=199, bl=25, candela=190
- <4>[ 5095.933634] c0 lsm330dlc_gyro_work_func, use last data(-7, 624, 105), status=0, selftest=0
- <6>[ 5097.801664] c0 pet_watchdog_timer_fn kicking...be66
- <6>[ 5099.889988] c2 max17047_get_soc: SOC(93, 9213 / 9821)
- <6>[ 5099.895292] c2 [323] bat: s(93, 11), v(4333, 104), t(52.2), cs(1, 1), cb(3), cr(999, 1000), t(2312)
- <4>[ 5099.904367] c1 healthd: max77693-charger: Unknown power supply type
- <4>[ 5099.907075] c1 healthd: battery [l=93 v=4333 t=52.2 h=2 st=2] c=0 dock-battery none chg=a
- <6>[ 5100.808110] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5100.812567] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5100.813449] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5100.816278] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5100.817346] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5100.818418] c3 [BT] bt_lpm_exit_lpm_locked.
- <4>[ 5102.167508] c0 lsm330dlc_gyro_work_func, use last data(53, -132, -56), status=0, selftest=0
- <4>[ 5102.168239] c0 lsm330dlc_gyro_work_func, use last data(53, -132, -56), status=0, selftest=0
- <6>[ 5102.586758] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5102.588457] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5102.588641] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5102.588702] c0 usb usb1: usb auto-resume
- <7>[ 5102.588744] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5102.616722] c1 hub 1-0:1.0: hub_resume
- <7>[ 5102.616802] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5102.616905] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5102.616953] c1 usb 1-2: usb auto-resume
- <6>[ 5102.619241] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5102.651787] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5102.666687] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5102.666754] c1 usb 1-2: finish resume
- <6>[ 5102.801669] c0 pet_watchdog_timer_fn kicking...be65
- <7>[ 5102.897730] c3 usb 1-2: usb auto-suspend
- <7>[ 5103.011662] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5103.011701] c3 usb usb1: bus auto-suspend
- <7>[ 5103.011727] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5103.011803] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5103.011833] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5103.975870] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5103.976067] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5103.976215] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5103.976274] c0 usb usb1: usb auto-resume
- <7>[ 5103.976316] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5104.001760] c2 hub 1-0:1.0: hub_resume
- <7>[ 5104.001854] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5104.001983] c2 usb 1-2: usb auto-resume
- <7>[ 5104.002094] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5104.003323] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5104.036809] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5104.051729] c3 mif: usb_port_resume: 1283, 4
- <7>[ 5104.051806] c3 usb 1-2: finish resume
- <7>[ 5104.252693] c3 usb 1-2: usb auto-suspend
- <7>[ 5104.366693] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5104.366754] c3 usb usb1: bus auto-suspend
- <7>[ 5104.366793] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5104.367388] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5104.367436] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5104.419670] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5104.419791] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5104.419920] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5104.419974] c0 usb usb1: usb auto-resume
- <7>[ 5104.420014] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5104.446719] c0 hub 1-0:1.0: hub_resume
- <7>[ 5104.446799] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5104.446902] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5104.446949] c0 usb 1-2: usb auto-resume
- <6>[ 5104.452764] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5104.481724] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5104.496698] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5104.496765] c0 usb 1-2: finish resume
- <6>[ 5104.508673] c2 max77686_rtc_set_time: 115/6/12 14:11:28(0)
- <6>[ 5104.531685] c0 max77686_rtc_set_time: task=Binder_1[11133]
- <7>[ 5104.757824] c3 usb 1-2: usb auto-suspend
- <7>[ 5104.871720] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5104.871786] c3 usb usb1: bus auto-suspend
- <7>[ 5104.871824] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5104.872117] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5104.872164] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5104.975937] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5104.975996] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5104.976105] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5104.976138] c0 usb usb1: usb auto-resume
- <7>[ 5104.976162] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5105.001975] c1 hub 1-0:1.0: hub_resume
- <7>[ 5105.002036] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5105.002135] c1 usb 1-2: usb auto-resume
- <7>[ 5105.002245] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5105.003499] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5105.036700] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5105.051658] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5105.051725] c1 usb 1-2: finish resume
- <6>[ 5105.058062] c3 [BT] bt_lpm_exit_lpm_locked.
- <7>[ 5105.252323] c1 usb 1-2: usb auto-suspend
- <7>[ 5105.366792] c1 hub 1-0:1.0: hub_suspend
- <7>[ 5105.366877] c1 usb usb1: bus auto-suspend
- <7>[ 5105.366930] c1 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5105.367241] c1 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5105.367303] c1 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5106.524491] c1 cm36651_work_func_light, red = 1380 green = 1638 blue = 1102 white = 2278
- <6>[ 5107.573402] c0 lcd panel: brightness=189, bl=24, candela=188
- <6>[ 5107.639912] c0 lcd panel: brightness=186, bl=23, candela=186
- <6>[ 5107.801672] c0 pet_watchdog_timer_fn kicking...bf1f
- <6>[ 5110.817747] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5110.823029] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5110.824297] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5112.225429] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5112.225506] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5112.225621] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5112.225658] c0 usb usb1: usb auto-resume
- <7>[ 5112.225685] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5112.251884] c0 hub 1-0:1.0: hub_resume
- <7>[ 5112.251953] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5112.252043] c0 usb 1-2: usb auto-resume
- <7>[ 5112.252079] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5112.253416] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5112.286669] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5112.301791] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5112.301851] c0 usb 1-2: finish resume
- <7>[ 5112.502315] c3 usb 1-2: usb auto-suspend
- <6>[ 5112.557508] c0 lcd panel: brightness=185, bl=22, candela=184
- <6>[ 5112.574253] c0 lcd panel: brightness=183, bl=21, candela=182
- <7>[ 5112.616669] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5112.616709] c3 usb usb1: bus auto-suspend
- <7>[ 5112.616735] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5112.617737] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5112.617775] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5112.801650] c0 pet_watchdog_timer_fn kicking...bf9d
- <4>[ 5117.113013] c0 lsm330dlc_gyro_work_func, use last data(54, 33, -44), status=1, selftest=0
- <6>[ 5117.358034] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5117.358237] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5117.358365] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5117.358417] c0 usb usb1: usb auto-resume
- <7>[ 5117.358481] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5117.386724] c2 hub 1-0:1.0: hub_resume
- <7>[ 5117.386813] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5117.386928] c2 usb 1-2: usb auto-resume
- <7>[ 5117.386989] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5117.388262] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5117.421771] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5117.436712] c2 mif: usb_port_resume: 1283, 4
- <7>[ 5117.436814] c2 usb 1-2: finish resume
- <6>[ 5117.445855] c3 [BT] bt_lpm_exit_lpm_locked.
- <7>[ 5117.637559] c2 usb 1-2: usb auto-suspend
- <7>[ 5117.751738] c2 hub 1-0:1.0: hub_suspend
- <7>[ 5117.751824] c2 usb usb1: bus auto-suspend
- <7>[ 5117.751877] c2 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5117.752570] c2 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5117.752642] c2 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5117.801681] c0 pet_watchdog_timer_fn kicking...c15c
- <4>[ 5118.133067] c0 lsm330dlc_gyro_work_func, use last data(72, -9, -18), status=0, selftest=0
- <6>[ 5119.346745] c0 max77693_irq_thread: interrupt source(0x01)
- <6>[ 5119.347378] c0 max77693_irq_thread: charger interrupt(0x40)
- <6>[ 5119.347454] c0 max77693_charger_irq: irq(436)
- <6>[ 5119.374062] c0 max77693_charger_irq: INT_OK(0x1d), THM(0x0), CHGIN(0x0), CHG(0x8), BAT(0x3), ST2(0x45)
- <6>[ 5119.596070] c0 max77693_irq_thread: interrupt source(0x08)
- <6>[ 5119.596996] c0 max77693_irq_thread: muic interrupt(0x00, 0x13, 0x00)
- <6>[ 5119.597056] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:441
- <6>[ 5119.598944] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
- <6>[ 5119.599716] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:441 ret:0
- <6>[ 5119.599779] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 5119.599850] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:3
- <6>[ 5119.599912] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
- <6>[ 5119.599966] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
- <6>[ 5119.602257] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
- <6>[ 5119.604038] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
- <6>[ 5119.604727] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
- <6>[ 5119.604786] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
- <6>[ 5119.604844] c0 max77693_set_jig_state: 0
- <6>[ 5119.604879] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: TA
- <6>[ 5119.604933] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
- <6>[ 5119.605006] c0 max77693_muic_charger_cb: cable_type(0), prev_cable(3)
- <6>[ 5119.605205] c0 max77693_set_jig_state: 0
- <6>[ 5119.605249] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:445
- <6>[ 5119.607102] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
- <6>[ 5119.608067] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:445 ret:0
- <6>[ 5119.608129] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 5119.608196] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:0
- <6>[ 5119.608259] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
- <6>[ 5119.608317] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
- <6>[ 5119.610517] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
- <6>[ 5119.612208] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
- <6>[ 5119.613021] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
- <6>[ 5119.613079] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
- <6>[ 5119.613137] c0 max77693_set_jig_state: 0
- <6>[ 5119.613173] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
- <6>[ 5119.893010] c0 max17047_get_soc: SOC(93, 9224 / 9821)
- <6>[ 5119.899228] c0 max77693_set_charger_state: reset recovery cnt
- <6>[ 5119.900876] c0 battery_charge_control: charge disabled, current as 0/0mA @9653
- <6>[ 5119.901568] c0 battery_interval_calulation: v diff(20000), weight(120)
- <6>[ 5119.901980] c0 battery_interval_calulation: weight(120)
- <6>[ 5119.902051] c0 battery_monitor_interval: apply weight(120), 120 -> 144
- <6>[ 5119.902143] c0 [324] bat: s(93, 11), v(4210, -20), t(53.5), cs(2, 2), cb(1), cr(0, 0)
- <6>[ 5119.902248] c0 battery_monitor_work: update wakelock(200)
- <4>[ 5119.913918] c3 healthd: max77693-charger: Unknown power supply type
- <4>[ 5119.917199] c3 healthd: battery [l=93 v=4210 t=53.5 h=2 st=3] c=0 dock-battery none chg=
- <3>[ 5120.013802] c3 an30259a: 00000000: 00 02 00 00 02 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <3>[ 5120.020563] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <3>[ 5120.027548] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <7>[ 5120.033635] c3 led_blink is called, Color:0x0 Brightness:40
- <6>[ 5122.801656] c0 pet_watchdog_timer_fn kicking...c004
- <6>[ 5125.069557] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5125.069698] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5125.069845] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5125.069889] c0 usb usb1: usb auto-resume
- <7>[ 5125.069918] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5125.096682] c0 hub 1-0:1.0: hub_resume
- <7>[ 5125.096767] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5125.096834] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5125.096865] c0 usb 1-2: usb auto-resume
- <6>[ 5125.098243] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5125.131747] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5125.146675] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5125.146740] c0 usb 1-2: finish resume
- <7>[ 5125.347558] c0 usb 1-2: usb auto-suspend
- <7>[ 5125.461665] c0 hub 1-0:1.0: hub_suspend
- <7>[ 5125.461700] c0 usb usb1: bus auto-suspend
- <7>[ 5125.461724] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5125.461963] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5125.461990] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5126.109009] c0 lsm330dlc_gyro_work_func, use last data(57, 20, -23), status=0, selftest=0
- <6>[ 5127.801750] c0 pet_watchdog_timer_fn kicking...beb4
- <4>[ 5128.903581] c1 lsm330dlc_gyro_work_func, use last data(50, 14, -47), status=0, selftest=0
- <6>[ 5129.182742] c0 max77693_irq_thread: interrupt source(0x01)
- <6>[ 5129.183271] c0 max77693_irq_thread: charger interrupt(0x40)
- <6>[ 5129.183305] c0 max77693_charger_irq: irq(436)
- <6>[ 5129.208808] c0 max77693_charger_irq: INT_OK(0x5d), THM(0x0), CHGIN(0x3), CHG(0x8), BAT(0x3), ST2(0x48)
- <6>[ 5129.209404] c0 max77693_irq_thread: interrupt source(0x08)
- <6>[ 5129.210197] c0 max77693_irq_thread: muic interrupt(0x00, 0x12, 0x00)
- <6>[ 5129.210242] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:445
- <6>[ 5129.211902] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x3f, 2:0x3b, 3:0x20]
- <6>[ 5129.212597] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:445 ret:0
- <6>[ 5129.212644] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x48
- <6>[ 5129.212698] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:40 dxovp:0 cable_type:0
- <6>[ 5129.212747] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
- <6>[ 5129.212787] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
- <6>[ 5129.214646] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
- <6>[ 5129.216113] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
- <6>[ 5129.216699] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
- <6>[ 5129.216741] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
- <6>[ 5129.216786] c0 max77693_set_jig_state: 0
- <6>[ 5129.216813] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
- <6>[ 5129.307117] c0 max77693_irq_thread: interrupt source(0x08)
- <6>[ 5129.308139] c0 max77693_irq_thread: muic interrupt(0x00, 0x03, 0x00)
- <6>[ 5129.308200] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:441
- <6>[ 5129.310006] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
- <6>[ 5129.310804] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:441 ret:0
- <6>[ 5129.310866] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x45
- <6>[ 5129.310936] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:5 vb:40 dxovp:0 cable_type:0
- <6>[ 5129.311001] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: ATTACHED
- <6>[ 5129.311056] c0 max77693-muic max77693-muic: func:max77693_muic_handle_attach st1:3f st2:45 cable_type:0
- <6>[ 5129.311123] c0 max77693-muic max77693-muic: max77693_muic_handle_attach:TA
- <6>[ 5129.311175] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
- <6>[ 5129.311249] c0 max77693_muic_charger_cb: cable_type(3), prev_cable(0)
- <4>[ 5129.713081] c0 lsm330dlc_gyro_work_func, use last data(58, 15, -34), status=0, selftest=0
- <6>[ 5129.721037] c0 max17047_get_soc: SOC(93, 9224 / 9821)
- <6>[ 5130.000210] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.060581] c0 battery_charge_control: charge enabled, current as 999/1000mA @9663
- <6>[ 5130.061300] c0 battery_interval_calulation: v diff(34375), weight(120)
- <6>[ 5130.061358] c0 battery_interval_calulation: temper delta(22), weight(100)
- <6>[ 5130.061431] c0 [325] bat: s(93, 0), v(4195, -34), t(51.3), cs(1, 1), cb(3), cr(999, 1000), t(0)
- <6>[ 5130.061519] c0 battery_monitor_work: update wakelock(200)
- <4>[ 5130.071287] c0 healthd: max77693-charger: Unknown power supply type
- <4>[ 5130.074328] c0 healthd: battery [l=93 v=4195 t=51.3 h=2 st=2] c=0 dock-battery none chg=a
- <3>[ 5130.111173] c2 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <3>[ 5130.121763] c2 an30259a: 00000000: 00 02 00 00 0d 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <3>[ 5130.131768] c2 an30259a: 00000000: 00 02 00 00 0d 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <7>[ 5130.146001] c2 led_blink is called, Color:0xD00 Brightness:40
- <6>[ 5130.174275] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.192291] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5130.192465] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5130.192587] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5130.192636] c0 usb usb1: usb auto-resume
- <7>[ 5130.192677] c0 s5p-ehci s5p-ehci: resume root hub
- <6>[ 5130.196873] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.209949] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.212028] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.212453] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.212633] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.215373] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.221379] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.221457] c3 [BT] bt_lpm_exit_lpm_locked.
- <7>[ 5130.221708] c0 hub 1-0:1.0: hub_resume
- <7>[ 5130.221762] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5130.221829] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5130.221863] c0 usb 1-2: usb auto-resume
- <6>[ 5130.223097] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <6>[ 5130.224976] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.225604] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.230197] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.230260] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.232710] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.233188] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.233719] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.236039] c3 [BT] bt_lpm_exit_lpm_locked.
- <7>[ 5130.256709] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5130.271682] c3 mif: usb_port_resume: 1283, 4
- <7>[ 5130.271741] c3 usb 1-2: finish resume
- <6>[ 5130.277730] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.284209] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.284260] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.290085] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.294993] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.332154] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.337885] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.347986] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.377220] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.377281] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.377346] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.377405] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.388190] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.401384] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.437987] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.443847] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.449149] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.456389] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.464272] c1 [BT] bt_lpm_exit_lpm_locked.
- <7>[ 5130.472564] c3 usb 1-2: usb auto-suspend
- <7>[ 5130.586679] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5130.586717] c3 usb usb1: bus auto-suspend
- <7>[ 5130.586740] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5130.587734] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5130.587763] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5130.821079] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.868669] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.868749] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.876340] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.877607] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.878832] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.881763] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.887180] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.892531] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.892804] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.899297] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.900249] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.905205] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.906434] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.909083] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.911500] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.916567] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.978119] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.980068] c1 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5130.987718] c1 [BT] bt_lpm_exit_lpm_locked.
- <4>[ 5131.083751] c0 lsm330dlc_gyro_work_func, use last data(63, 11, -52), status=0, selftest=0
- <6>[ 5132.802079] c0 pet_watchdog_timer_fn kicking...bf13
- <4>[ 5133.858739] c1 Mali: mem_usage before 27115 : 105381888
- <6>[ 5135.310811] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5135.310912] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5135.311041] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5135.311095] c0 usb usb1: usb auto-resume
- <7>[ 5135.311134] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5135.336727] c2 hub 1-0:1.0: hub_resume
- <7>[ 5135.336817] c2 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5135.336946] c2 usb 1-2: usb auto-resume
- <7>[ 5135.337026] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5135.338591] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5135.371750] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5135.386711] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5135.386783] c1 usb 1-2: finish resume
- <7>[ 5135.588135] c3 usb 1-2: usb auto-suspend
- <7>[ 5135.701744] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5135.701820] c3 usb usb1: bus auto-suspend
- <7>[ 5135.701869] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5135.702213] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5135.702271] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5136.343573] c3 lsm330dlc_gyro_work_func, use last data(109, 24, -43), status=0, selftest=0
- <6>[ 5137.525037] c1 cm36651_work_func_light, red = 980 green = 1166 blue = 760 white = 1499
- <6>[ 5137.801651] c0 pet_watchdog_timer_fn kicking...c018
- <6>[ 5137.984021] c1 [BT] bt_lpm_exit_lpm_locked.
- <4>[ 5138.133389] c2 lsm330dlc_gyro_work_func, use last data(51, 0, -37), status=0, selftest=0
- <6>[ 5138.892142] c0 max77693_irq_thread: interrupt source(0x01)
- <6>[ 5138.892924] c0 max77693_irq_thread: charger interrupt(0x40)
- <6>[ 5138.892978] c0 max77693_charger_irq: irq(436)
- <6>[ 5138.919161] c0 max77693_charger_irq: INT_OK(0x1d), THM(0x0), CHGIN(0x0), CHG(0x8), BAT(0x3), ST2(0x45)
- <6>[ 5139.140669] c0 max77693_irq_thread: interrupt source(0x08)
- <6>[ 5139.141452] c0 max77693_irq_thread: muic interrupt(0x00, 0x13, 0x00)
- <6>[ 5139.141514] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:441
- <6>[ 5139.143221] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
- <6>[ 5139.143905] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:441 ret:0
- <6>[ 5139.143963] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 5139.144031] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:3
- <6>[ 5139.144090] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
- <6>[ 5139.144146] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
- <6>[ 5139.146077] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
- <6>[ 5139.147617] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
- <6>[ 5139.148238] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
- <6>[ 5139.148293] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
- <6>[ 5139.148356] c0 max77693_set_jig_state: 0
- <6>[ 5139.148392] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: TA
- <6>[ 5139.148442] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
- <6>[ 5139.148513] c0 max77693_muic_charger_cb: cable_type(0), prev_cable(3)
- <6>[ 5139.148697] c0 max77693_set_jig_state: 0
- <6>[ 5139.148735] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:445
- <6>[ 5139.150323] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
- <6>[ 5139.150991] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:445 ret:0
- <6>[ 5139.151042] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 5139.151098] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:0
- <6>[ 5139.151154] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
- <6>[ 5139.151200] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
- <6>[ 5139.153067] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
- <6>[ 5139.154525] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
- <6>[ 5139.155085] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
- <6>[ 5139.155131] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
- <6>[ 5139.155183] c0 max77693_set_jig_state: 0
- <6>[ 5139.155215] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
- <4>[ 5139.158082] c0 lsm330dlc_gyro_work_func, use last data(86, 3, -48), status=0, selftest=0
- <6>[ 5139.430603] c0 max17047_get_soc: SOC(93, 9224 / 9821)
- <6>[ 5139.437296] c0 max77693_set_charger_state: reset recovery cnt
- <6>[ 5139.438066] c0 battery_charge_control: charge disabled, current as 0/0mA @9673
- <6>[ 5139.438751] c0 [326] bat: s(93, 0), v(4169, -60), t(51.8), cs(2, 2), cb(1), cr(0, 0)
- <6>[ 5139.438829] c0 battery_monitor_work: update wakelock(200)
- <4>[ 5139.447557] c2 healthd: max77693-charger: Unknown power supply type
- <4>[ 5139.449582] c2 healthd: battery [l=93 v=4169 t=51.8 h=2 st=3] c=0 dock-battery none chg=
- <3>[ 5139.512867] c0 an30259a: 00000000: 00 02 00 00 02 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <3>[ 5139.534603] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <3>[ 5139.546255] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
- <7>[ 5139.555111] c3 led_blink is called, Color:0x0 Brightness:40
- <4>[ 5140.064468] c0 lsm330dlc_gyro_work_func, use last data(45, 19, -43), status=0, selftest=0
- <4>[ 5140.118151] c0 lsm330dlc_gyro_work_func, use last data(57, 20, -50), status=0, selftest=0
- <4>[ 5140.253206] c3 lsm330dlc_gyro_work_func, use last data(59, 17, -27), status=0, selftest=0
- <6>[ 5140.958701] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5140.960005] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5140.961034] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5140.965359] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5140.966173] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5140.967465] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5142.801669] c0 pet_watchdog_timer_fn kicking...bf2a
- <6>[ 5145.580443] c0 lcd panel: brightness=181, bl=20, candela=180
- <4>[ 5146.123895] c2 lsm330dlc_gyro_work_func, use last data(84, 2, -61), status=0, selftest=0
- <4>[ 5146.308478] c0 lsm330dlc_gyro_work_func, use last data(69, 20, 9), status=0, selftest=0
- <6>[ 5147.801659] c0 pet_watchdog_timer_fn kicking...c1c5
- <4>[ 5148.108201] c2 lsm330dlc_gyro_work_func, use last data(235, -26, -3), status=0, selftest=0
- <6>[ 5150.968881] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5150.973597] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5150.974364] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5152.801660] c0 pet_watchdog_timer_fn kicking...c23f
- <6>[ 5154.252431] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=520
- <4>[ 5155.138757] c0 lsm330dlc_gyro_work_func, use last data(730, -539, 61), status=0, selftest=0
- <6>[ 5155.752225] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5155.752353] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5155.752677] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5155.752758] c0 usb usb1: usb auto-resume
- <7>[ 5155.752825] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5155.781705] c0 hub 1-0:1.0: hub_resume
- <7>[ 5155.781793] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5155.781907] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5155.781962] c0 usb 1-2: usb auto-resume
- <6>[ 5155.783215] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5155.816755] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5155.831688] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5155.831757] c0 usb 1-2: finish resume
- <7>[ 5156.032409] c3 usb 1-2: usb auto-suspend
- <7>[ 5156.146775] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5156.146819] c3 usb usb1: bus auto-suspend
- <7>[ 5156.146845] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5156.147897] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5156.147935] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5156.528169] c0 lsm330dlc_gyro_work_func, use last data(-2338, -7177, -3114), status=0, selftest=0
- <4>[ 5157.093194] c0 lsm330dlc_gyro_work_func, use last data(-374, -1148, -948), status=0, selftest=0
- <6>[ 5157.801678] c0 pet_watchdog_timer_fn kicking...c1c5
- <4>[ 5160.088727] c0 lsm330dlc_gyro_work_func, use last data(124, -73, -88), status=0, selftest=0
- <6>[ 5160.583274] c0 lcd panel: brightness=179, bl=19, candela=170
- <4>[ 5161.108609] c0 lsm330dlc_gyro_work_func, use last data(374, -164, -86), status=0, selftest=0
- <7>[ 5161.230963] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5161.352491] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5162.640267] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5162.747088] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5162.801670] c0 pet_watchdog_timer_fn kicking...bed1
- <6>[ 5162.944735] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5162.944817] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5162.944931] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5162.944970] c0 usb usb1: usb auto-resume
- <7>[ 5162.945000] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5162.971686] c0 hub 1-0:1.0: hub_resume
- <7>[ 5162.971766] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5162.971864] c0 usb 1-2: usb auto-resume
- <7>[ 5162.972530] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5162.973294] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5163.007084] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5163.021664] c2 mif: usb_port_resume: 1283, 4
- <7>[ 5163.021713] c2 usb 1-2: finish resume
- <7>[ 5163.222527] c3 usb 1-2: usb auto-suspend
- <7>[ 5163.336710] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5163.336775] c3 usb usb1: bus auto-suspend
- <7>[ 5163.336808] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5163.337062] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5163.337101] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <7>[ 5163.901675] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5164.026550] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5164.743944] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5164.744044] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5164.744173] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5164.744226] c0 usb usb1: usb auto-resume
- <7>[ 5164.744266] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5164.746121] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5164.771711] c0 hub 1-0:1.0: hub_resume
- <7>[ 5164.771792] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5164.771897] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5164.771945] c0 usb 1-2: usb auto-resume
- <6>[ 5164.772873] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5164.806756] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5164.821691] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5164.821753] c0 usb 1-2: finish resume
- <7>[ 5164.852970] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5164.911009] c0 binder: 11117:11809 transaction failed 29189, size 320-0
- <6>[ 5165.040368] c3 lsm330dlc_accel_set_delay: old=25000000ns,new=25000000ns,odr=0x40,opened=1
- <6>[ 5165.040771] c0 lsm330dlc_gyro_set_delay_ns, delay_ns=50000000, odr_value=0x11
- <6>[ 5165.042226] c0 lsm330dlc_accel_set_delay: old=25000000ns,new=25000000ns,odr=0x40,opened=1
- <6>[ 5165.094989] c2 max77686_rtc_set_time: 115/6/12 14:12:28(0)
- <6>[ 5165.121977] c0 max77686_rtc_set_time: task=Binder_B[11807]
- <7>[ 5165.182965] c3 usb 1-2: usb auto-suspend
- <7>[ 5165.296669] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5165.296708] c3 usb usb1: bus auto-suspend
- <7>[ 5165.296734] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5165.297330] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5165.297363] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <3>[ 5165.967701] c3 init: untracked pid 27303 killed by signal 9
- <7>[ 5166.192204] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5166.294990] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5166.377684] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5166.473112] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5166.903312] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5167.009796] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5167.020124] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5167.020196] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5167.020324] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5167.020361] c0 usb usb1: usb auto-resume
- <7>[ 5167.020387] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5167.046814] c0 hub 1-0:1.0: hub_resume
- <7>[ 5167.046875] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5167.046953] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5167.046985] c0 usb 1-2: usb auto-resume
- <6>[ 5167.048130] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5167.081671] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5167.096692] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5167.096738] c0 usb 1-2: finish resume
- <7>[ 5167.100022] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5167.183814] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5167.241495] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5167.298383] c3 usb 1-2: usb auto-suspend
- <7>[ 5167.355494] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5167.411692] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5167.411735] c3 usb usb1: bus auto-suspend
- <7>[ 5167.411760] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5167.412432] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5167.412460] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <7>[ 5167.644930] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5167.758428] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5167.801648] c0 pet_watchdog_timer_fn kicking...be66
- <7>[ 5167.826267] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5167.936011] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5168.348617] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5168.444311] c0 [TouchKey] keycode:158 pressed:0
- <7>[ 5168.512217] c0 [TouchKey] keycode:158 pressed:1
- <6>[ 5168.524677] c2 cm36651_work_func_light, red = 970 green = 814 blue = 695 white = 1492
- <7>[ 5168.617839] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5169.409642] c2 binder: undelivered transaction 5708848
- <6>[ 5169.691347] c0 lsm330dlc_accel_set_delay: old=25000000ns,new=25000000ns,odr=0x40,opened=1
- <6>[ 5169.955105] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5169.955203] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5169.955320] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5169.955380] c0 usb usb1: usb auto-resume
- <7>[ 5169.955408] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5169.981724] c0 hub 1-0:1.0: hub_resume
- <7>[ 5169.981774] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5169.981838] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5169.981869] c0 usb 1-2: usb auto-resume
- <6>[ 5169.983136] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5170.016711] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5170.031662] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5170.031707] c0 usb 1-2: finish resume
- <7>[ 5170.233023] c0 usb 1-2: usb auto-suspend
- <7>[ 5170.346684] c0 hub 1-0:1.0: hub_suspend
- <7>[ 5170.346728] c0 usb usb1: bus auto-suspend
- <7>[ 5170.346754] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5170.347466] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5170.347496] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5170.974759] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5170.974889] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5170.975036] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5170.975142] c0 usb usb1: usb auto-resume
- <7>[ 5170.975189] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5171.001854] c0 hub 1-0:1.0: hub_resume
- <7>[ 5171.002054] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5171.002238] c0 usb 1-2: usb auto-resume
- <7>[ 5171.002458] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5171.003537] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5171.036869] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5171.051776] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5171.051839] c0 usb 1-2: finish resume
- <7>[ 5171.255849] c3 usb 1-2: usb auto-suspend
- <7>[ 5171.366673] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5171.366721] c3 usb usb1: bus auto-suspend
- <7>[ 5171.366750] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5171.367270] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5171.367313] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5172.801796] c0 pet_watchdog_timer_fn kicking...c012
- <6>[ 5174.076189] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5174.076269] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5174.076385] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5174.076428] c0 usb usb1: usb auto-resume
- <7>[ 5174.076458] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5174.101702] c0 hub 1-0:1.0: hub_resume
- <7>[ 5174.101766] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5174.101845] c0 usb 1-2: usb auto-resume
- <7>[ 5174.101881] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5174.103562] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5174.136847] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5174.151960] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5174.152080] c0 usb 1-2: finish resume
- <7>[ 5174.352338] c0 usb 1-2: usb auto-suspend
- <7>[ 5174.466755] c0 hub 1-0:1.0: hub_suspend
- <7>[ 5174.466873] c0 usb usb1: bus auto-suspend
- <7>[ 5174.466946] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5174.467561] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5174.467648] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5175.964264] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5175.964486] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5175.964668] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5175.964779] c0 usb usb1: usb auto-resume
- <7>[ 5175.964863] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5175.991935] c3 hub 1-0:1.0: hub_resume
- <7>[ 5175.992133] c3 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5175.992373] c3 usb 1-2: usb auto-resume
- <7>[ 5175.992500] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5175.993656] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5176.026870] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5176.042004] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5176.042147] c0 usb 1-2: finish resume
- <7>[ 5176.242734] c3 usb 1-2: usb auto-suspend
- <7>[ 5176.356817] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5176.356940] c3 usb usb1: bus auto-suspend
- <7>[ 5176.357020] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5176.358013] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5176.358107] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5176.619706] c3 lcd panel: brightness=169, bl=18, candela=160
- <6>[ 5176.769723] c0 lcd panel: brightness=159, bl=17, candela=150
- <6>[ 5177.372433] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5177.372645] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5177.372826] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5177.372937] c0 usb usb1: usb auto-resume
- <7>[ 5177.373021] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5177.401966] c1 hub 1-0:1.0: hub_resume
- <7>[ 5177.402163] c1 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5177.402406] c1 usb 1-2: usb auto-resume
- <7>[ 5177.402595] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5177.403785] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5177.436875] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5177.451868] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5177.451988] c1 usb 1-2: finish resume
- <7>[ 5177.654302] c1 usb 1-2: usb auto-suspend
- <6>[ 5177.669841] c0 lcd panel: brightness=149, bl=16, candela=140
- <7>[ 5177.766783] c1 hub 1-0:1.0: hub_suspend
- <7>[ 5177.766913] c1 usb usb1: bus auto-suspend
- <7>[ 5177.766994] c1 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5177.767171] c1 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5177.767265] c1 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5177.801683] c0 pet_watchdog_timer_fn kicking...c8a7
- <6>[ 5178.670097] c0 lcd panel: brightness=138, bl=15, candela=130
- <6>[ 5178.736614] c0 lcd panel: brightness=129, bl=14, candela=120
- <6>[ 5178.788943] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5178.789056] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5178.789187] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5178.789242] c0 usb usb1: usb auto-resume
- <7>[ 5178.789284] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5178.816670] c0 hub 1-0:1.0: hub_resume
- <7>[ 5178.816748] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5178.816848] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5178.816894] c0 usb 1-2: usb auto-resume
- <6>[ 5178.817957] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5178.851745] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5178.866752] c1 mif: usb_port_resume: 1283, 4
- <7>[ 5178.866868] c1 usb 1-2: finish resume
- <7>[ 5179.067763] c3 usb 1-2: usb auto-suspend
- <7>[ 5179.181676] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5179.181715] c3 usb usb1: bus auto-suspend
- <7>[ 5179.181740] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5179.182342] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5179.182373] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5179.736912] c0 lcd panel: brightness=119, bl=13, candela=110
- <6>[ 5180.720489] c0 lcd panel: brightness=109, bl=12, candela=108
- <6>[ 5180.803787] c0 lcd panel: brightness=103, bl=9, candela=102
- <6>[ 5181.001267] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5181.005666] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5181.006554] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5181.009266] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5181.010163] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5181.011083] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5181.098607] c2 lsm330dlc_accel_ioctl: opened = 1, enable = 0
- <6>[ 5181.101303] c1 lsm330dlc_gyro_set_enable, 563 enable : 0.
- <6>[ 5181.101803] c1 lsm330dlc_gyro_set_enable, 616 lsm330dlc_gyro enable is done.
- <6>[ 5181.105424] c1 set_gps_uart_op: off
- <6>[ 5181.105618] c2 lps331ap_set_enable
- <6>[ 5181.105655] c2 lps331ap_prs_disable
- <6>[ 5181.603920] c0 lcd panel: brightness=101, bl=8, candela=100
- <6>[ 5181.687267] c0 lcd panel: brightness=96, bl=7, candela=90
- <6>[ 5181.753932] c0 lcd panel: brightness=89, bl=6, candela=80
- <6>[ 5181.870638] c0 lcd panel: brightness=79, bl=5, candela=70
- <6>[ 5182.670807] c0 lcd panel: brightness=69, bl=4, candela=60
- <6>[ 5182.801685] c0 pet_watchdog_timer_fn kicking...c9da
- <6>[ 5183.025919] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5183.026119] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5183.026302] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5183.026414] c0 usb usb1: usb auto-resume
- <7>[ 5183.026497] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5183.051907] c0 hub 1-0:1.0: hub_resume
- <7>[ 5183.052075] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5183.052304] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5183.052399] c0 usb 1-2: usb auto-resume
- <6>[ 5183.053646] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5183.086823] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <3>[ 5183.101826] c0 [HOTPLUG OUT] check_down 200000<=200000 && 184<300
- <3>[ 5183.101949] c0 CPU_DOWN 1
- <6>[ 5183.102217] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5183.102353] c0 usb 1-2: finish resume
- <5>[ 5183.114640] c0 CPU1: shutdown
- <7>[ 5183.303726] c3 usb 1-2: usb auto-suspend
- <7>[ 5183.416813] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5183.416935] c3 usb usb1: bus auto-suspend
- <7>[ 5183.417017] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5183.417648] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5183.417744] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <3>[ 5185.101955] c0 [HOTPLUG OUT] check_down 200000<=200000 && 199<200
- <3>[ 5185.102078] c0 CPU_DOWN 2
- <5>[ 5185.108641] c0 CPU2: shutdown
- <6>[ 5185.837927] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5185.838211] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5185.838394] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5185.838506] c0 usb usb1: usb auto-resume
- <7>[ 5185.838591] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5185.866836] c0 hub 1-0:1.0: hub_resume
- <7>[ 5185.867005] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5185.867244] c0 usb 1-2: usb auto-resume
- <7>[ 5185.867373] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5185.868651] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5185.903274] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5185.916735] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5185.916854] c0 usb 1-2: finish resume
- <7>[ 5186.117432] c3 usb 1-2: usb auto-suspend
- <7>[ 5186.231764] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5186.231893] c3 usb usb1: bus auto-suspend
- <7>[ 5186.231974] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5186.232746] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5186.232842] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5186.311794] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5186.312022] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5186.312208] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5186.312318] c0 usb usb1: usb auto-resume
- <7>[ 5186.312401] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5186.341747] c0 hub 1-0:1.0: hub_resume
- <7>[ 5186.341910] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5186.342148] c0 usb 1-2: usb auto-resume
- <7>[ 5186.342275] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5186.343315] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5186.376798] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5186.391771] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5186.391893] c0 usb 1-2: finish resume
- <6>[ 5186.429905] c0 max77686_rtc_set_time: 115/6/12 14:12:50(0)
- <6>[ 5186.456963] c0 max77686_rtc_set_time: task=Binder_9[11774]
- <7>[ 5186.767179] c3 usb 1-2: usb auto-suspend
- <6>[ 5186.838053] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <7>[ 5186.838140] c3 usb 1-2: usb auto-resume
- <6>[ 5186.840074] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5186.871768] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5186.886696] c3 mif: usb_port_resume: 1283, 4
- <7>[ 5186.886740] c3 usb 1-2: finish resume
- <7>[ 5187.087547] c3 usb 1-2: usb auto-suspend
- <3>[ 5187.101707] c0 [HOTPLUG IN] check_up 1400000>=500000 && 402>200
- <3>[ 5187.101781] c0 CPU_UP 1
- <4>[ 5187.114970] c1 CPU1: Booted secondary processor
- <6>[ 5187.115034] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 5187.116641] c1 Switched to NOHz mode on CPU #1
- <7>[ 5187.201885] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5187.201929] c3 usb usb1: bus auto-suspend
- <7>[ 5187.201957] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5187.202496] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5187.202525] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5187.801717] c0 pet_watchdog_timer_fn kicking...c7b8
- <3>[ 5190.151870] c0 [HOTPLUG OUT] check_down 200000<=200000 && 187<200
- <3>[ 5190.151997] c0 CPU_DOWN 1
- <5>[ 5190.160633] c0 CPU1: shutdown
- <6>[ 5191.021906] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5191.027639] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5191.029066] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5192.801686] c0 pet_watchdog_timer_fn kicking...ca16
- <6>[ 5197.801673] c0 pet_watchdog_timer_fn kicking...ca16
- <6>[ 5199.140559] c0 lcd panel: brightness=70, bl=5, candela=70
- <6>[ 5199.273902] c0 lcd panel: brightness=81, bl=6, candela=80
- <6>[ 5199.390599] c0 lcd panel: brightness=90, bl=7, candela=90
- <6>[ 5199.507273] c0 lcd panel: brightness=101, bl=8, candela=100
- <6>[ 5199.526081] c0 cm36651_work_func_light, red = 12978 green = 11896 blue = 9840 white = 17462
- <6>[ 5199.557182] c0 lcd panel: brightness=105, bl=10, candela=104
- <6>[ 5199.590601] c0 lcd panel: brightness=109, bl=12, candela=108
- <6>[ 5199.674013] c0 lcd panel: brightness=111, bl=13, candela=110
- <6>[ 5199.757396] c0 lcd panel: brightness=121, bl=14, candela=120
- <6>[ 5199.890754] c0 lcd panel: brightness=130, bl=15, candela=130
- <6>[ 5200.024106] c0 lcd panel: brightness=141, bl=16, candela=140
- <6>[ 5200.140765] c0 lcd panel: brightness=150, bl=17, candela=150
- <6>[ 5200.274154] c0 lcd panel: brightness=161, bl=18, candela=160
- <6>[ 5200.390848] c0 lcd panel: brightness=170, bl=19, candela=170
- <6>[ 5200.527009] c0 lcd panel: brightness=181, bl=20, candela=180
- <6>[ 5200.590842] c0 lcd panel: brightness=183, bl=21, candela=182
- <6>[ 5200.624043] c0 lcd panel: brightness=187, bl=23, candela=186
- <6>[ 5200.640790] c0 lcd panel: brightness=190, bl=25, candela=190
- <6>[ 5201.657644] c0 lcd panel: brightness=200, bl=26, candela=200
- <6>[ 5202.674552] c0 lcd panel: brightness=210, bl=27, candela=210
- <6>[ 5202.801701] c0 pet_watchdog_timer_fn kicking...c99e
- <6>[ 5203.121358] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5203.121571] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5203.121852] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5203.121970] c0 usb usb1: usb auto-resume
- <7>[ 5203.122055] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5203.151986] c0 hub 1-0:1.0: hub_resume
- <7>[ 5203.152153] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5203.152388] c0 usb 1-2: usb auto-resume
- <7>[ 5203.152716] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5203.153707] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5203.186811] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5203.202256] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5203.202375] c0 usb 1-2: finish resume
- <7>[ 5203.403632] c0 usb 1-2: usb auto-suspend
- <7>[ 5203.516851] c0 hub 1-0:1.0: hub_suspend
- <7>[ 5203.516974] c0 usb usb1: bus auto-suspend
- <7>[ 5203.517058] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5203.518210] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5203.518785] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5205.549340] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5205.549550] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5205.549735] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5205.549848] c0 usb usb1: usb auto-resume
- <7>[ 5205.549933] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5205.576782] c0 hub 1-0:1.0: hub_resume
- <7>[ 5205.576953] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5205.577189] c0 usb 1-2: usb auto-resume
- <7>[ 5205.577319] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5205.578517] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5205.611795] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5205.626772] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5205.626893] c0 usb 1-2: finish resume
- <7>[ 5205.828332] c3 usb 1-2: usb auto-suspend
- <7>[ 5205.941833] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5205.941962] c3 usb usb1: bus auto-suspend
- <7>[ 5205.942047] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5205.943088] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5205.943184] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5207.428483] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5207.428691] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5207.428874] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5207.428986] c0 usb usb1: usb auto-resume
- <7>[ 5207.429069] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5207.456795] c0 hub 1-0:1.0: hub_resume
- <7>[ 5207.456964] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5207.457203] c0 usb 1-2: usb auto-resume
- <7>[ 5207.457333] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5207.458468] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5207.491854] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5207.506758] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5207.506878] c0 usb 1-2: finish resume
- <6>[ 5207.629180] c0 max77686_rtc_set_time: 115/6/12 14:13:11(0)
- <6>[ 5207.651975] c0 max77686_rtc_set_time: task=Binder_A[11793]
- <6>[ 5207.801632] c0 pet_watchdog_timer_fn kicking...c9e3
- <7>[ 5207.822209] c3 usb 1-2: usb auto-suspend
- <7>[ 5207.936703] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5207.936743] c3 usb usb1: bus auto-suspend
- <7>[ 5207.936770] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5207.937173] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5207.937204] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5208.567956] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5208.568196] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5208.568380] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5208.569763] c0 usb usb1: usb auto-resume
- <7>[ 5208.569857] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5208.596755] c0 hub 1-0:1.0: hub_resume
- <7>[ 5208.596921] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5208.597125] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5208.597408] c0 usb 1-2: usb auto-resume
- <6>[ 5208.598583] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <6>[ 5208.625657] c0 lcd panel: brightness=220, bl=28, candela=220
- <7>[ 5208.631830] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5208.646760] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5208.646889] c0 usb 1-2: finish resume
- <7>[ 5208.847960] c0 usb 1-2: usb auto-suspend
- <7>[ 5208.961687] c0 hub 1-0:1.0: hub_suspend
- <7>[ 5208.961757] c0 usb usb1: bus auto-suspend
- <7>[ 5208.961802] c0 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5208.961971] c0 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5208.962023] c0 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5212.559513] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5212.559827] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5212.560012] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5212.560123] c0 usb usb1: usb auto-resume
- <7>[ 5212.560205] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5212.586756] c0 hub 1-0:1.0: hub_resume
- <7>[ 5212.586925] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5212.587162] c0 usb 1-2: usb auto-resume
- <7>[ 5212.587290] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5212.588651] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5212.621847] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5212.636741] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5212.636864] c0 usb 1-2: finish resume
- <6>[ 5212.801674] c0 pet_watchdog_timer_fn kicking...c89c
- <7>[ 5212.837256] c3 usb 1-2: usb auto-suspend
- <7>[ 5212.952038] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5212.952161] c3 usb usb1: bus auto-suspend
- <7>[ 5212.952243] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5212.953357] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5212.953454] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5214.326110] c0 healthd: max77693-charger: Unknown power supply type
- <4>[ 5214.331488] c0 healthd: battery [l=93 v=4169 t=51.8 h=2 st=3] c=0 dock-battery none chg=
- <6>[ 5214.402329] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=500
- <6>[ 5214.562284] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5214.562493] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5214.562676] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5214.562787] c0 usb usb1: usb auto-resume
- <7>[ 5214.562869] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5214.591752] c0 hub 1-0:1.0: hub_resume
- <7>[ 5214.591917] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5214.592154] c0 usb 1-2: usb auto-resume
- <7>[ 5214.592282] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5214.593837] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5214.626914] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5214.641740] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5214.641860] c0 usb 1-2: finish resume
- <7>[ 5214.843386] c3 usb 1-2: usb auto-suspend
- <7>[ 5214.956832] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5214.956956] c3 usb usb1: bus auto-suspend
- <7>[ 5214.957036] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5214.958022] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5214.958118] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <6>[ 5217.801719] c0 pet_watchdog_timer_fn kicking...ca51
- <6>[ 5221.148931] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5221.155215] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5221.156091] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5221.159131] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5221.159895] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5221.160661] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5222.801694] c0 pet_watchdog_timer_fn kicking...ca51
- <3>[ 5224.002963] c0 [HOTPLUG IN] check_up 1200000>=500000 && 378>200
- <3>[ 5224.003035] c0 CPU_UP 1
- <4>[ 5224.018063] c1 CPU1: Booted secondary processor
- <6>[ 5224.018130] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 5224.021652] c1 Switched to NOHz mode on CPU #1
- <4>[ 5224.881124] c1 Mali: mem_usage before 27691 : 92798976
- <7>[ 5226.902075] c0 [TouchKey] keycode:158 pressed:1
- <7>[ 5226.992351] c0 [TouchKey] keycode:158 pressed:0
- <6>[ 5227.801742] c0 pet_watchdog_timer_fn kicking...bfec
- <6>[ 5228.690484] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5228.690728] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5228.690913] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5228.691025] c0 usb usb1: usb auto-resume
- <7>[ 5228.691108] c0 s5p-ehci s5p-ehci: resume root hub
- <7>[ 5228.716760] c0 hub 1-0:1.0: hub_resume
- <7>[ 5228.716926] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5228.717128] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[ 5228.717352] c0 usb 1-2: usb auto-resume
- <6>[ 5228.718644] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
- <7>[ 5228.751909] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- <6>[ 5228.766752] c0 mif: usb_port_resume: 1283, 4
- <7>[ 5228.766868] c0 usb 1-2: finish resume
- <7>[ 5228.967912] c3 usb 1-2: usb auto-suspend
- <7>[ 5229.081665] c3 hub 1-0:1.0: hub_suspend
- <7>[ 5229.081707] c3 usb usb1: bus auto-suspend
- <7>[ 5229.081730] c3 s5p-ehci s5p-ehci: suspend root hub
- <6>[ 5229.082205] c3 s5p-ehci s5p-ehci: host_phy_susp
- <6>[ 5229.082233] c3 s5p_ehci_runtime_suspend: usage=0, child=0
- <4>[ 5229.434239] c0 Mali: mem_usage before 27519 : 88342528
- <6>[ 5230.525804] c0 cm36651_work_func_light, red = 9862 green = 9894 blue = 6994 white = 13656
- <6>[ 5231.158607] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5231.163631] c3 [BT] bt_lpm_exit_lpm_locked.
- <6>[ 5231.164378] c3 [BT] bt_lpm_exit_lpm_locked.
- <36>[ 5231.240304] c1 type=1400 audit(1436710414.608:538): avc: denied { mounton } for pid=27772 comm="daemonsu" path="/storage/emulated/0/Android/obb" dev=fuse ino=166 scontext=u:r:init:s0 tcontext=u:object_r:fuse:s0 tclass=dir
- <36>[ 5231.246229] c1 type=1300 audit(1436710414.608:538): arch=40000028 syscall=21 per=800000 success=yes exit=0 a0=413a4c9c a1=413a7c9c a2=0 a3=1000 items=2 ppid=2328 pid=27772 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="daemonsu" exe="/system/xbin/daemonsu" subj=u:r:init:s0 key=(null)
- <36>[ 5231.246659] c1 type=1307 audit(1436710414.608:538): cwd="/"
- <36>[ 5231.247016] c1 type=1302 audit(1436710414.608:538): item=0 name="/storage/emulated/0/Android/obb" inode=166 dev=00:13 mode=040771 ouid=0 ogid=1028 rdev=00:00 obj=u:object_r:fuse:s0
- <36>[ 5231.247216] c1 type=1302 audit(1436710414.608:538): item=1 name=(null) inode=11676 dev=00:13 mode=040771 ouid=0 ogid=1028 rdev=00:00 obj=u:object_r:fuse:s0
- <36>[ 5231.247533] c1 type=1320 audit(1436710414.608:538):
- <6>[ 5231.433065] c0 SysRq : Emergency Remount R/O
- <6>[ 5231.437004] c0 EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
- <6>[ 5231.441451] c0 EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
- <6>[ 5231.443156] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 5231.450538] c0 EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
- <4>[ 5231.458251] c0 Emergency Remount complete
- <6>[ 5231.515146] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
- <6>[ 5231.515209] c0 s5p-ehci s5p-ehci: host_phy_resume
- <6>[ 5231.515322] c0 s5p_ehci_runtime_resume: usage=1, child=0
- <7>[ 5231.515358] c0 usb usb1: usb auto-resume
- <7>[ 5231.515384] c0 s5p-ehci s5p-ehci: resume root hub
- <0>[ 5231.534136] c0 (sec_debug_set_upload_magic) 0
- <6>[ 5231.534420] c0 REBOOT Notifier for CPUFREQ
- <6>[ 5231.536299] c0 REBOOT Notifier for BUSFREQ
- <6>[ 5231.536336] c0 lcdfreq lcdfreq: lcdfreq_reboot_notify
- <7>[ 5231.541659] c0 hub 1-0:1.0: hub_resume
- <7>[ 5231.541701] c0 hub 1-0:1.0: port 2: status 0507 change 0000
- <7>[ 5231.541761] c0 usb 1-2: usb auto-resume
- <7>[ 5231.541791] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[ 5231.541884] c0 modem_if modem_if.1: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.541927] c0 mif: xmm6262_off:
- <6>[ 5231.541948] c0 modem_if modem_if.1: shutdown -
- <6>[ 5231.541974] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.542007] c0 s5p-ohci s5p-ohci: shutdown -
- <6>[ 5231.542031] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.542416] c0 s5p-ehci s5p-ehci: shutdown -
- <6>[ 5231.542708] c0 lps331ap 11-005d: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.542739] c0 lps331ap 11-005d: shutdown -
- <6>[ 5231.542764] c0 ak8975 10-000c: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.542796] c0 ak8975 10-000c: shutdown -
- <6>[ 5231.542820] c0 cm36651 9-0018: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.542850] c0 cm36651 9-0018: shutdown -
- <6>[ 5231.542874] c0 lsm330dlc_gyro 1-006b: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.542907] c0 lsm330dlc_gyro 1-006b: shutdown -
- <6>[ 5231.542933] c0 lsm330dlc_accel 1-0019: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.542966] c0 lsm330dlc_accel_shutdown: is called.
- <6>[ 5231.543121] c0 lsm330dlc_accel 1-0019: shutdown -
- <6>[ 5231.543152] c0 pn65n 5-002b: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543183] c0 pn65n 5-002b: shutdown -
- <6>[ 5231.543207] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543240] c0 s5p_ddc 5-003a: shutdown -
- <6>[ 5231.543265] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543309] c0 sii9234_cbus 15-0064: shutdown -
- <6>[ 5231.543335] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543370] c0 sii9234_hdmi_rx 15-0049: shutdown -
- <6>[ 5231.543397] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543428] c0 sii9234_tpi 15-003d: shutdown -
- <6>[ 5231.543454] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543487] c0 sii9234_mhl_tx 15-0039: shutdown -
- <6>[ 5231.543597] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543626] c0 i2c 5-0009: shutdown -
- <6>[ 5231.543650] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.543679] c0 i2c i2c-5: shutdown -
- <6>[ 5231.543701] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.543738] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
- <6>[ 5231.591665] c3 mif: usb_port_resume: 0, 0
- <7>[ 5231.591698] c3 hub 1-0:1.0: port 2 status 0000.0000 after resume, -19
- <7>[ 5231.591732] c3 usb 1-2: can't resume, status -19
- <7>[ 5231.591757] c3 hub 1-0:1.0: logical disconnect on port 2
- <3>[ 5231.591805] c3 mif: link_pm_runtime_work: resume error(-19)
- <7>[ 5231.591835] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
- <7>[ 5231.591874] c0 hub 1-0:1.0: port 2, status 0000, change 0000, 12 Mb/s
- <6>[ 5231.591923] c0 usb 1-2: USB disconnect, device number 2 by hub_thread+0xd18/0x1464
- <6>[ 5231.591960] c0 call_battery_notify : VID : 0x1519, PID : 0x20 skipped.
- <7>[ 5231.591992] c0 usb 1-2: unregistering device
- <7>[ 5231.592015] c0 usb 1-2: unregistering interface 1-2:1.0
- <6>[ 5231.592157] c0 mif: if_usb_disconnect:
- <6>[ 5231.592182] c0 mif: if_usb_disconnect: put dev 0xeb882800
- <7>[ 5231.592363] c0 usb 1-2: unregistering interface 1-2:1.1
- <6>[ 5231.592510] c0 mif: if_usb_disconnect:
- <7>[ 5231.592614] c0 usb 1-2: unregistering interface 1-2:1.2
- <6>[ 5231.592731] c0 mif: if_usb_disconnect:
- <6>[ 5231.592754] c0 mif: if_usb_disconnect: put dev 0xeb882800
- <7>[ 5231.592873] c0 usb 1-2: unregistering interface 1-2:1.3
- <6>[ 5231.593005] c0 mif: if_usb_disconnect:
- <7>[ 5231.593122] c0 usb 1-2: unregistering interface 1-2:1.4
- <6>[ 5231.593232] c0 mif: if_usb_disconnect:
- <6>[ 5231.593256] c0 mif: if_usb_disconnect: put dev 0xeb882800
- <7>[ 5231.593527] c0 usb 1-2: unregistering interface 1-2:1.5
- <6>[ 5231.593699] c0 mif: if_usb_disconnect:
- <7>[ 5231.594001] c0 usb 1-2: unregistering interface 1-2:1.6
- <6>[ 5231.594102] c0 mif: if_usb_disconnect:
- <6>[ 5231.594125] c0 mif: if_usb_disconnect: put dev 0xeb882800
- <7>[ 5231.594383] c0 usb 1-2: unregistering interface 1-2:1.7
- <6>[ 5231.594511] c0 mif: if_usb_disconnect:
- <7>[ 5231.594787] c0 usb 1-2: usb_disable_device nuking all URBs
- <6>[ 5231.617088] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
- <6>[ 5231.617122] c0 max77686_rtc_shutdown: success to disable WTSR
- <6>[ 5231.617159] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
- <6>[ 5231.666650] c1 max77686-rtc max77686-rtc: shutdown -
- <6>[ 5231.666726] c1 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.666763] c1 dummy 7-0006: shutdown -
- <6>[ 5231.666791] c1 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.666829] c1 max77686 7-0009: shutdown -
- <6>[ 5231.666857] c1 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.666891] c1 i2c i2c-7: shutdown -
- <6>[ 5231.666915] c1 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.666951] c1 wm8994 4-001a: shutdown -
- <6>[ 5231.666977] c1 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667011] c1 i2c i2c-4: shutdown -
- <6>[ 5231.667037] c1 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667079] c1 melfas-ts 3-0048: shutdown -
- <6>[ 5231.667108] c1 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667143] c1 i2c i2c-3: shutdown -
- <6>[ 5231.667170] c1 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667206] c1 i2c i2c-1: shutdown -
- <6>[ 5231.667234] c1 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667270] c1 i2c i2c-0: shutdown -
- <6>[ 5231.667299] c1 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667337] c1 i2c i2c-12: shutdown -
- <6>[ 5231.667367] c1 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667406] c1 an30259a 21-0030: shutdown -
- <6>[ 5231.667437] c1 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.667474] c1 i2c i2c-21: shutdown -
- <6>[ 5231.667512] c1 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0xf0
- <6>[ 5231.667562] c1 max77693-muic:max77693_muic_shutdown +
- <6>[ 5231.667596] c1 max77693-muic:max77693_muic_shutdown max77693->iolock.count.counter=1
- <6>[ 5231.667645] c1 max77693-muic:max77693_muic_shutdown JIGSet: auto detection
- <6>[ 5231.668838] c1 max77693-muic:max77693_muic_shutdown -
- <6>[ 5231.668876] c1 max77693-muic max77693-muic: shutdown -
- <6>[ 5231.668928] c1 max77693-charger max77693-charger: shutdown +: max77693_charger_shutdown+0x0/0x84
- <6>[ 5231.670314] c1 func:max77693_charger_shutdown
- <6>[ 5231.670352] c1 max77693-charger max77693-charger: shutdown -
- <6>[ 5231.670400] c1 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.670442] c1 dummy 17-0048: shutdown -
- <6>[ 5231.670475] c1 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.670520] c1 dummy 17-0025: shutdown -
- <6>[ 5231.670552] c1 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.670599] c1 max77693 17-0066: shutdown -
- <6>[ 5231.670630] c1 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.670672] c1 i2c i2c-17: shutdown -
- <6>[ 5231.670707] c1 i2c i2c-16: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.670759] c1 i2c i2c-16: shutdown -
- <6>[ 5231.670795] c1 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671019] c1 i2c i2c-15: shutdown -
- <6>[ 5231.671145] c1 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671197] c1 max17047-fuelgauge 14-0036: shutdown -
- <6>[ 5231.671236] c1 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671278] c1 i2c i2c-14: shutdown -
- <6>[ 5231.671310] c1 i2c i2c-11: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671348] c1 i2c i2c-11: shutdown -
- <6>[ 5231.671381] c1 i2c i2c-10: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671423] c1 i2c i2c-10: shutdown -
- <6>[ 5231.671453] c1 i2c i2c-9: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671810] c1 i2c i2c-9: shutdown -
- <6>[ 5231.671852] c1 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671897] c1 sec_touchkey_driver 8-0020: shutdown -
- <6>[ 5231.671933] c1 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.671971] c1 i2c i2c-8: shutdown -
- <6>[ 5231.671997] c1 Si47xx 19-0011: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.672032] c1 Si47xx 19-0011: shutdown -
- <6>[ 5231.672060] c1 i2c i2c-19: shutdown +: i2c_device_shutdown+0x0/0x54
- <6>[ 5231.672094] c1 i2c i2c-19: shutdown -
- <6>[ 5231.672228] c1 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.672289] c1 s3c-sdhci s3c-sdhci.3: shutdown -
- <6>[ 5231.672327] c1 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.674119] c0 sdhci_shutdown_host : MMC Card OFF
- <6>[ 5231.680056] c0 s3c-sdhci s3c-sdhci.2: shutdown -
- <6>[ 5231.680129] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x28
- <6>[ 5231.680177] c0 mdnie mdnie: shutdown -
- <4>[ 5231.680374] c0 Disabling non-boot CPUs ...
- <5>[ 5231.682415] c0 CPU1: shutdown
- <7>[ 5231.691478] c0 s5p_ehci_cpu_notify: set ehci irq to cpu0
- <5>[ 5231.692181] c0 CPU3: shutdown
- <0>[ 5231.692761] c0 Restarting system with command 'now'.
- <0>[ 5231.692787] c0 pid = 1 name:init
- <0>[ 5231.692829] c0 sec_reboot (104, now)
- PMIC rev = PASS2(4)
- BUCK1OUT(vdd_mif) = 0x06
- BUCK3DVS1(vdd_int) = 0x28
- [MMC] there are pending interrupts 0x00010000
- cardtype: 0x00000007
- SB_MMC_HS_52MHZ_1_8V_3V_IO
- mmc->card_caps: 0x00000311
- mmc->host_caps: 0x00000311
- mmc_initialize: mmc->capacity = 30777344
- Samsung S-Boot 4.0-2372379 for GT-I9300 (Jan 21 2014 - 19:31:06)
- EXYNOS4412(EVT 1.1) / 1022MB / 15028MB / Rev 12 / I9300XXUGNA8 /(PKG_ID 0xe072008)
- - read_bl1
- pit_check_signature (PIT) valid.
- initialize_ddi_data: usable! (1:0xa)
- PARAM ENV VERSION: v1.0..
- set_charger_current: chg curr(bf), in curr(17)
- set_charger_state: buck(1), chg(1), reg(0x05)
- microusb_get_attached_device: STATUS1:0x3f, 2:0x00
- set_auto_current: ta_state(0), curr(1000)
- init_fuelgauge: fuelgauge power ok
- init_fuelgauge: not POR status
- init_fuelgauge: is reset case, skip soc-cal.
- get_table_soc: vcell(4182) is caculated to t-soc(93.796)
- init_fuelgauge: start: vcell(4182), vfocv(4227), soc(92), table soc(93)
- init_fuelgauge: finish: vcell(4182), vfocv(4227), soc(92), table soc(93)
- init_microusb_ic: MUIC: CONTROL1:0x00
- init_microusb_ic: MUIC: CONTROL1:0x00
- init_microusb_ic: MUIC: CONTROL2:0x3b
- init_microusb_ic: MUIC: CONTROL2:0x3b
- PMIC_ID = 0x02
- PMIC_IRQSRC = 0x00
- PMIC_IRQ1 = 0x30
- PMIC_IRQ2 = 0x00
- PMIC_IRQ1M = 0xff
- PMIC_IRQ2M = 0xff
- PMIC_STATUS1 = 0x12
- PMIC_STATUS2 = 0x00
- PMIC_PWRON = 0x01
- PMIC_RTCINT = 0x11
- PMIC_RTCINTM = 0x3d
- s5p_check_keypad: 0x0
- s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
- s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
- s5p_check_download: 0
- microusb_get_attached_device: STATUS1:0x3f, 2:0x00
- check_pm_status: normal reset, do not enter LPM mode.
- cmu_div:1, div:7, src_clk:800000000, pixel_clk:57153600
- s5p_dsim_display_config : VIDEO MODE
- a2, 60, 90,
- <start_checksum:451>CHECKSUM_HEADER_SECTOR :4096
- <start_checksum:453>offset:50, size:6296
- <start_checksum:457>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:16
- Not Need Movinand Checksum
- Movinand Checksum Confirmation Pass
- load_kernel: loading boot image from 81920..
- Verify_Binary_Signature: failed.
- pit_check_signature (BOOT) invalid.
- Set invalid sign flag
- No need to update kernel type.
- ATAG_CORE: 5 54410001 0 0 0
- ATAG_MEM: 4 54410002 10000000 40000000
- ATAG_MEM: 4 54410002 10000000 50000000
- ATAG_MEM: 4 54410002 10000000 60000000
- ATAG_MEM: 4 54410002 0FE00000 70000000
- ATAG_SERIAL: 4 54410006 4df101c2 19786f2d
- ATAG_INITRD2: 4 54420005 42000000 e3ecb
- ATAG_REVISION: 3 54410007 c
- ATAG_CMDLINE: 7f 54410009 'console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x100000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=96 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=144m oops=panic pmic_info=65 cordon=ea1608736039320ede19f31546db5fb3 connie=GT-I9300_OPEN_EUR_b7de3d6cb887e396845f8001f942c52a androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=I9300XXUGNA8 androidboot.serialno=4df101c219786f2d snd_soc_core.pmdown_time=1000'
- ATAG_NONE: 0 0
- Starting kernel at 0x40008000...
- SWITCH_SEL(1)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement