Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.07.29 21:12:45 =~=~=~=~=~=~=~=~=~=~=~=
- \00\00\00\00\00HELLO! BOOT0 is starting!
- boot0 version : 3.1.0
- rtc 1 value 0x00010000
- rtc 2 value 0x00020000
- rtc 3 value 0x00030000
- INFO: dram code V1.9
- dram clk=672
- dram_zq = 0x0x003f3fdd!!
- DDR3 used!!
- dram channle 2
- 0x0x00100001
- 0x0x00100001
- pmu id=0x00000062
- VTC Disabled!!
- Channel 0 OK!
- VTC Disabled!!
- Channel 1 OK!
- dram size =2048
- card boot number = 2
- card no is 2
- sdcard 2 line count 0
- [mmc]: mmc driver ver 2014-04-3 16:20
- [mmc]: ***Try SD card 2***
- [mmc]: mmc 2 cmd 8 timeout, err 0x00000100
- [mmc]: mmc 2 cmd 8 err 0x00000100
- [mmc]: mmc 2 send if cond failed
- [mmc]: mmc 2 cmd 55 timeout, err 0x00000100
- [mmc]: mmc 2 cmd 55 err 0x00000100
- [mmc]: mmc 2 send app cmd failed
- [mmc]: ***Try MMC card 2***
- [mmc]: MMC ver 5.0
- [mmc]: SD/MMC Card: 4bit, capacity: 14910MB
- [mmc]: vendor: Man 0x00150100 Snr 0x01e2d262
- [mmc]: product: AWMB3
- [mmc]: revision: 5.2
- [mmc]: ***SD/MMC 2 init OK!!!***
- sdcard 2 init ok
- The size of uboot is 0x000c0000.
- sum=0xc61016d0
- src_sum=0xc61016d0
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- [ 0.671]
- U-Boot 2011.09-rc1-00001-ga70098a (Jun 09 2014 - 09:12:58) Allwinner Technology
- [ 0.680]version: 1.1.0
- [ 0.683]pmbus: ready
- [ 0.685]PMU: AXP809
- [ 0.687]PMU: AXP809 found
- [ 0.690]PMU: AXP806
- [ 0.692]PMU: AXP806 found
- [ 0.695]PMU: bat ratio = 100
- try to set dcdc3 to 900 mV
- [ 0.701]PMU: dcdc3 900
- [ 0.703]PMU: pll1 1008 Mhz
- set power on vol to default
- dcdc1_vol = 3000, onoff=1
- dcdc2_vol = 900, onoff=0
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc5_vol = 1500, onoff=1
- dc5ldo_vol = 900, onoff=1
- dldo2_vol = 3000, onoff=1
- eldo3_vol = 1800, onoff=1
- aldo1_vol = 3000, onoff=1
- aldo3_vol = 3000, onoff=1
- find power_sply to end
- slave power
- dcdca_vol = 900, onoff=1
- dcdcb_vol = 0, onoff=0
- dcdcc_vol = 0, onoff=0
- dcdcd_vol = 900, onoff=1
- dcdce_vol = 2100, onoff=1
- aldo1_vol = 3000, onoff=1
- bldo1_vol = 1800, onoff=1
- bldo2_vol = 1800, onoff=1
- cldo1_vol = 0, onoff=0
- find slave power sply to end
- supply=gpio1
- axp=axp809, supply=gpio1, vol=2500
- reg addr=0x6000b00, value=0x6, pmu_vol=2500
- supply=aldo2
- axp=axp809, supply=aldo2, vol=1800
- reg addr=0x6000b04, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp809, supply=dcdc1, vol=3000
- reg addr=0x6000b08, value=0xa, pmu_vol=3000
- supply=bldo1
- axp=axp806, supply=bldo1, vol=1800
- reg addr=0x6000b0c, value=0x0, pmu_vol=1800
- supply=eldo2
- axp=axp809, supply=eldo2, vol=1800
- reg addr=0x6000b10, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp809, supply=dcdc1, vol=3000
- reg addr=0x6000b14, value=0xa, pmu_vol=3000
- supply=gpio0
- axp=axp809, supply=gpio0, vol=3000
- reg addr=0x6000b18, value=0xa, pmu_vol=3000
- supply=dcdc1
- axp=axp809, supply=dcdc1, vol=3000
- reg addr=0x6000b1c, value=0xa, pmu_vol=3000
- supply=dldo2
- axp=axp809, supply=dldo2, vol=3000
- reg addr=0x8002f00, value=0xa, pmu_vol=3000
- supply=eldo3
- axp=axp809, supply=eldo3, vol=3000
- reg addr=0x8002f04, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- no battery, limit to dc
- fel key old mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- [ 0.866]DRAM: 2 GiB
- relocation Offset is: 75b0b000
- deu_mode1 not exist.
- get clock handle by id 36 fail!
- get clock handle by id 36 fail!
- lcd0.lcd_pwm_freq is ZERO
- lcd1.lcd_pwm_freq is ZERO
- lcd 2 is not register
- screen 0 do not support HDMI TYPE!
- screen 2 do not support HDMI TYPE!
- smcl's set manager is NULL
- smbl's set manager is NULL
- screen_id 0 do not support HDMI TYPE!
- get hdmi0 failed!
- [ 1.110]boot_disp.output_disp=1
- [ 1.114]boot_disp.output_type=3
- [ 1.117]boot_disp.output_mode=10
- [ 1.120]boot_disp.auto_hpd=1
- hdmi open
- Hdmi_open
- Hdmi_hal_video_enable_sync
- workmode = 0
- MMC: 2
- [ 1.235][mmc]: mmc driver ver 2014-5-26 14:21:30
- [ 1.240][mmc]: get sdc_odly_25M fail,use default dly 0
- [ 1.245][mmc]: get sdc_sdly_25M fail,use default dly 5
- [ 1.251][mmc]: get sdc_odly_50M fail,use default dly 5
- [ 1.256][mmc]: get sdc_sdly_50M fail,use default dly 4
- [ 1.261][mmc]: get sdc_f_max fail,use default sdc_f_max 48000000
- [ 1.267][mmc]: PC Bias: 0x06000b08 0x0000000a
- [ 1.272][mmc]: SUNXI SD/MMC: 2
- [ 1.285][mmc]: ************Try SD card 2************
- [ 1.290][mmc]: mmc 2 cmd 8 timeout, err 100
- [ 1.297][mmc]: mmc 2 mmc cmd 8 err 0x00000100
- [ 1.301][mmc]: mmc send if cond failed
- [ 1.305][mmc]: mmc 2 cmd 55 timeout, err 100
- [ 1.311][mmc]: mmc 2 mmc cmd 55 err 0x00000100
- [ 1.315][mmc]: send app cmd failed
- [ 1.318][mmc]: ************Try MMC card 2************
- [ 1.367][mmc]: MID 000015 PSN e2d2626e
- [ 1.370][mmc]: PNM AWMB3R -- 0x41-57-4d-42-33-52
- [ 1.375][mmc]: PRV 0.1
- [ 1.378][mmc]: MDT m-4 y-2014
- [ 1.381][mmc]: MMC ver 5.0
- [ 1.384][mmc]: ---------------mmc->clock 48000000-----------
- [ 1.389][mmc]: ---------------mmc->bus_width 4--------------
- [ 1.395][mmc]: SD/MMC Card: 4bit, capacity: 14910MB
- [ 1.400][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
- [ 1.406][mmc]: ************SD/MMC 2 init OK!!!************
- [ 1.412]sunxi flash init ok
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:10-
- -name- -start- -size-
- bootloader : 1000000 1000000
- env : 2000000 1000000
- boot : 3000000 1000000
- system : 4000000 30000000
- misc : 34000000 1000000
- recovery : 35000000 2000000
- cache : 37000000 28000000
- metadata : 5f000000 1000000
- private : 60000000 1000000
- UDISK : 61000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- cant find rcvy value
- cant find fstbt value
- misc partition found
- misc_message->command = 0
- to be run cmd=run setargs_mmc boot_normal
- WORK_MODE_BOOT
- board_status_probe
- [ 1.497]key trigger
- sunxi_bmp_logo_display
- screen_id =1, screen_width =1920, screen_height =1080
- [ 1.577]Hit any key to stop autoboot: 1 0
- read boot or recovery all
- [ 3.263]sunxi flash read :offset 3000000, 13788296 bytes OK
- no signature
- [ 3.272]ready to boot
- [ 3.274]
- Starting kernel ...
- [sun9i_fixup]: From boot, get meminfo:
- Start: 0x20000000
- Size: 2048MB
- [mcpm_smp_init_cpus] ncores=8
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.39 (hechuanlong@Exdroid23) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Mon Jun 23 17:04:36 CST 2014
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun9i
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 524288
- [ 0.000000] free_area_init_node: node 0, pgdat c09b56c0, node_mem_map c1276000
- [ 0.000000] Normal zone: 1404 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3204 pages used for memmap
- [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c2485000 s11072 r8192 d13504 u32768
- [ 0.000000] pcpu-alloc: s11072 r8192 d13504 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/block/mmcblk0p7 init=/init vmalloc=384M ion_reserve=812M loglevel=8 partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:misc@mmcblk0p8:recovery@mmcblk0p9:cache@mmcblk0p10:metadata@mmcblk0p11:private@mmcblk0p12:UDISK@mmcblk0p1 boot_type=2
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 2048MB = 2048MB total
- [ 0.000000] Memory: 1232016k/1232016k available, 865136k reserved, 626684K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc08ec698 (9106 kB)
- [ 0.000000] .init : 0xc08ed000 - 0xc093cb40 ( 319 kB)
- [ 0.000000] .data : 0xc093e000 - 0xc09b7fb8 ( 488 kB)
- [ 0.000000] .bss : 0xc09b909c - 0xc0b380d8 (1533 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] try to syncboot of clk hdmi_slow
- [ 0.000000] try to syncboot of clk trace
- [ 0.000000] try to syncboot of clk ats
- [ 0.000000] try to syncboot of clk uart0
- [ 0.000000] try to syncboot of clk gt
- [ 0.000000] try to syncboot of clk de
- [ 0.000000] try to syncboot of clk hdmi
- [ 0.000000] try to syncboot of clk lcd1
- [ 0.000000] try to syncboot of clk sdr0
- [ 0.000000] try to syncboot of clk sdmmc2
- [ 0.000000] try to syncboot of clk cci400
- [ 0.000000] try to syncboot of clk pio
- [ 0.000000] try to syncboot of clk lradc
- [ 0.000000] try to syncboot of clk twd
- [ 0.000000] try to syncboot of clk ahb2
- [ 0.000000] try to syncboot of clk dma
- [ 0.000000] try to syncboot of clk sdram
- [ 0.000000] try to syncboot of clk axi1
- [ 0.000000] try to syncboot of clk axi0
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000239] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.000264] pid_max: default: 32768 minimum: 301
- [ 0.000433] Security Framework initialized
- [ 0.000455] SELinux: Initializing.
- [ 0.000504] SELinux: Starting in permissive mode
- [ 0.000589] Mount-cache hash table entries: 512
- [ 0.001733] Initializing cgroup subsys debug
- [ 0.001750] Initializing cgroup subsys cpuacct
- [ 0.001761] Initializing cgroup subsys freezer
- [ 0.001804] CPU: Testing write buffer coherency: ok
- [ 0.001857] ftrace: allocating 23694 entries in 70 pages
- [ 0.047138] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.047194] Setting up static identity map for 0x206257b8 - 0x20625810
- [ 0.150300] CPU1: Booted secondary processor
- [ 0.150374] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.190365] CPU2: Booted secondary processor
- [ 0.190431] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.230519] CPU3: Booted secondary processor
- [ 0.230584] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.267400] CPU4: failed to boot: -22
- [ 0.307431] CPU5: failed to boot: -22
- [ 0.347490] CPU6: failed to boot: -22
- [ 0.387556] CPU7: failed to boot: -22
- [ 0.387727] Brought up 4 CPUs
- [ 0.387738] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.388637] devtmpfs: initialized
- [ 0.395188] script_init enter!
- [ 0.395931] script_init exit!
- [ 0.395975] sched: registering cpufreq notifiers for scale-invariant loads
- [ 0.397012] pinctrl core: initialized pinctrl subsystem
- [ 0.397886] dummy:
- [ 0.398363] NET: Registered protocol family 16
- [ 0.398879] script_sysfs_init success
- [ 0.399064] sunxi_dump_init success
- [ 0.399488] sunxi pinctrl probe enter
- [ 0.401028] gpiochip_add: registered GPIOs 0 to 447 on device: sunxi-pinctrl
- [ 0.403034] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.403621] axp_pinctrl_probe enter...
- [ 0.403803] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
- [ 0.403823] mainkey total count : 93
- [ 0.403833] mainkey name : product, pin count : 0
- [ 0.403843] mainkey name : platform, pin count : 0
- [ 0.403852] mainkey name : target, pin count : 0
- [ 0.403862] mainkey name : charging_type, pin count : 0
- [ 0.403872] mainkey name : key_detect_en, pin count : 0
- [ 0.403882] mainkey name : power_sply, pin count : 0
- [ 0.403892] mainkey name : slave_power_sply, pin count : 0
- [ 0.403902] mainkey name : gpio_bias, pin count : 0
- [ 0.403911] mainkey name : card_boot, pin count : 0
- [ 0.403921] mainkey name : pm_para, pin count : 0
- [ 0.403931] mainkey name : card0_boot_para, pin count : 6
- [ 0.403944] mainkey name : card2_boot_para, pin count : 6
- [ 0.403956] mainkey name : boot_disp, pin count : 0
- [ 0.403966] mainkey name : twi_para, pin count : 2
- [ 0.403976] mainkey name : uart_para, pin count : 2
- [ 0.403986] mainkey name : jtag_para, pin count : 4
- [ 0.403997] mainkey name : clock, pin count : 0
- [ 0.404007] mainkey name : dram_para, pin count : 0
- [ 0.404017] mainkey name : gmac0, pin count : 16
- [ 0.404029] mainkey name : wakeup_src_para, pin count : 3
- [ 0.404042] mainkey name : twi0, pin count : 2
- [ 0.404052] mainkey name : twi1, pin count : 2
- [ 0.404062] mainkey name : twi2, pin count : 2
- [ 0.404072] mainkey name : twi3, pin count : 2
- [ 0.404083] mainkey name : twi4, pin count : 2
- [ 0.404093] mainkey name : uart0, pin count : 2
- [ 0.404103] mainkey name : uart1, pin count : 4
- [ 0.404113] mainkey name : uart2, pin count : 4
- [ 0.404123] mainkey name : uart3, pin count : 4
- [ 0.404134] mainkey name : uart4, pin count : 4
- [ 0.404144] mainkey name : uart5, pin count : 4
- [ 0.404154] mainkey name : spi0, pin count : 4
- [ 0.404164] mainkey name : spi1, pin count : 0
- [ 0.404174] mainkey name : spi2, pin count : 4
- [ 0.404184] mainkey name : spi3, pin count : 7
- [ 0.404195] mainkey name : spi_devices, pin count : 0
- [ 0.404205] mainkey name : spi_board0, pin count : 0
- [ 0.404215] mainkey name : rtp_para, pin count : 0
- [ 0.404225] mainkey name : ctp_para, pin count : 0
- [ 0.404235] mainkey name : ctp_list_para, pin count : 0
- [ 0.404245] mainkey name : tkey_para, pin count : 0
- [ 0.404255] mainkey name : motor_para, pin count : 0
- [ 0.404265] mainkey name : ths_para, pin count : 0
- [ 0.404275] mainkey name : cooler_table, pin count : 0
- [ 0.404286] mainkey name : nand0_para, pin count : 19
- [ 0.404299] mainkey name : nand1_para, pin count : 19
- [ 0.404312] mainkey name : disp_init, pin count : 0
- [ 0.404323] mainkey name : lcd0_para, pin count : 10
- [ 0.404335] map mainkey [lcd0_para] to pinctrl, map number [2]
- [ 0.404349] mainkey name : hdmi_para, pin count : 0
- [ 0.404360] mainkey name : pwm0_para, pin count : 1
- [ 0.404371] mainkey name : pwm1_para, pin count : 1
- [ 0.404381] mainkey name : csi0, pin count : 5
- [ 0.404392] mainkey name : csi1, pin count : 0
- [ 0.404402] mainkey name : tvout_para, pin count : 0
- [ 0.404412] mainkey name : tvin_para, pin count : 0
- [ 0.404422] mainkey name : mmc0_para, pin count : 7
- [ 0.404433] mainkey name : mmc1_para, pin count : 6
- [ 0.404445] mainkey name : mmc2_para, pin count : 11
- [ 0.404457] mainkey name : mmc3_para, pin count : 11
- [ 0.404470] mainkey name : smc_para, pin count : 0
- [ 0.404480] mainkey name : usbc0, pin count : 2
- [ 0.404490] map mainkey [usbc0] to pinctrl, map number [2]
- [ 0.404502] mainkey name : usbc1, pin count : 1
- [ 0.404513] mainkey name : usbc2, pin count : 1
- [ 0.404524] mainkey name : usbc3, pin count : 0
- [ 0.404534] mainkey name : usb_feature, pin count : 0
- [ 0.404544] mainkey name : msc_feature, pin count : 0
- [ 0.404555] mainkey name : serial_feature, pin count : 0
- [ 0.404565] mainkey name : gsensor_para, pin count : 1
- [ 0.404577] mainkey name : gsensor_list_para, pin count : 0
- [ 0.404588] mainkey name : gps_para, pin count : 0
- [ 0.404598] mainkey name : wifi_para, pin count : 11
- [ 0.404610] mainkey name : 3g_para, pin count : 5
- [ 0.404622] mainkey name : gy_para, pin count : 1
- [ 0.404634] mainkey name : gy_list_para, pin count : 0
- [ 0.404646] mainkey name : ls_para, pin count : 1
- [ 0.404659] mainkey name : ls_list_para, pin count : 0
- [ 0.404671] mainkey name : compass_para, pin count : 0
- [ 0.404683] mainkey name : led_para, pin count : 3
- [ 0.404695] mainkey name : bt_para, pin count : 0
- [ 0.404705] mainkey name : s_i2s1, pin count : 9
- [ 0.404717] mainkey name : audio0, pin count : 2
- [ 0.404728] mainkey name : spdif0, pin count : 2
- [ 0.404738] mainkey name : s_cir0, pin count : 1
- [ 0.404749] mainkey name : cir, pin count : 1
- [ 0.404760] mainkey name : pmu1_para, pin count : 0
- [ 0.404770] mainkey name : pmu2_para, pin count : 0
- [ 0.404781] mainkey name : dvfs_table, pin count : 0
- [ 0.404791] mainkey name : Vdevice, pin count : 0
- [ 0.404802] mainkey name : s_uart0, pin count : 2
- [ 0.404813] mainkey name : s_rsb0, pin count : 2
- [ 0.404823] mainkey name : s_jtag0, pin count : 4
- [ 0.404835] mainkey name : s_powchk, pin count : 0
- [ 0.404847] mainkey name : dram_dvfs_table, pin count : 0
- [ 0.404857] axp pinctrl driver probe ok
- [ 0.407416] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.407432] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.408124] [sunxi-module]: [sunxi-module.0] probe success
- [ 0.408309] Not Found clk pll3 in script
- [ 0.408320] Not Found clk pll7 in script
- [ 0.408340] script config pll8 to 297 Mhz
- [ 0.408379] script config pll10 to 2376 Mhz
- [ 0.408654] sunxi_default_clk_init
- [ 0.455127] bio: create slab <bio-0> at 0
- [ 0.455601] [ARISC] :sunxi-arisc driver v2.00
- [ 0.501376] [ARISC] :arisc version: [v0.0.23]
- [ 0.501396] [sunxi-module]: arisc register success
- [ 0.904300] [ARISC] :sunxi-arisc driver v2.00 startup succeeded
- [ 0.952097] CPU4: Booted secondary processor
- [ 0.952163] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
- [ 0.998729] CPU5: Booted secondary processor
- [ 0.998794] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
- [ 1.048821] CPU6: Booted secondary processor
- [ 1.048892] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
- [ 1.098890] CPU7: Booted secondary processor
- [ 1.098963] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
- [ 1.106274] SCSI subsystem initialized
- [ 1.107238] usbcore: registered new interface driver usbfs
- [ 1.107608] usbcore: registered new interface driver hub
- [ 1.107862] usbcore: registered new device driver usb
- [ 1.108603] sunxi_i2c_adap_init()1438 - [Jun 23 2014 17:03:34]Sunxi I2C init ...
- [ 1.108630] twi_chan_cfg()350 - [twi0] fetch twi_regulator from sysconfig failed
- [ 1.108648] twi_chan_cfg()350 - [twi1] fetch twi_regulator from sysconfig failed
- [ 1.108664] twi_chan_cfg()350 - [twi2] fetch twi_regulator from sysconfig failed
- [ 1.108681] twi_chan_cfg()350 - [twi3] fetch twi_regulator from sysconfig failed
- [ 1.108697] twi_chan_cfg()350 - [twi4] fetch twi_regulator from sysconfig failed
- [ 1.110297] Linux video capture interface: v2.00
- [ 1.111298] axp22_board axp22_board: AXP (CHIP ID: 0x62) detected
- [ 1.116505] axp22_RTC: 3000 mV
- [ 1.116992] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
- [ 1.117425] axp22_aldo2: 700 <--> 3300 mV at 1800 mV
- [ 1.117831] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
- [ 1.118252] axp22_dldo1: 700 <--> 4200 mV at 3400 mV
- [ 1.118746] axp22_dldo2: 700 <--> 3300 mV at 3000 mV
- [ 1.119162] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
- [ 1.119558] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
- [ 1.119974] axp22_eldo3: 700 <--> 3300 mV at 3000 mV
- [ 1.120374] axp22_dc5ldo: 700 <--> 1400 mV at 900 mV
- [ 1.120772] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
- [ 1.121181] axp22_dcdc2: 600 <--> 1540 mV at 900 mV
- [ 1.121610] axp22_dcdc3: 600 <--> 1860 mV at 900 mV
- [ 1.122025] axp22_dcdc4: 600 <--> 2600 mV at 900 mV
- [ 1.122446] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
- [ 1.122861] axp22_ldoio0: 700 <--> 3300 mV at 3000 mV
- [ 1.123285] axp22_ldoio1: 700 <--> 3300 mV at 2500 mV
- [ 1.123686] axp22_sw0: at 700 mV
- [ 1.124377] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
- [ 1.128010] now_rest_vol = 100
- [ 1.129441] axp15_board axp15_board: AXP (CHIP ID: 0x60) detected
- [ 1.133656] axp15_aldo1: 700 <--> 3300 mV at 3000 mV
- [ 1.134124] axp15_aldo2: 700 <--> 3300 mV at 700 mV
- [ 1.134541] axp15_aldo3: 700 <--> 3300 mV at 700 mV
- [ 1.134961] axp15_bldo1: 700 <--> 1900 mV at 1800 mV
- [ 1.135383] axp15_bldo2: 700 <--> 1900 mV at 1800 mV
- [ 1.135828] axp15_bldo3: 700 <--> 1900 mV at 700 mV
- [ 1.136224] axp15_bldo4: 700 <--> 1900 mV at 700 mV
- [ 1.136613] axp15_cldo1: 700 <--> 3300 mV at 3000 mV
- [ 1.137012] axp15_cldo2: 700 <--> 4200 mV at 700 mV
- [ 1.137415] axp15_cldo3: 700 <--> 3300 mV at 700 mV
- [ 1.137816] axp15_dcdc1: 600 <--> 1520 mV at 840 mV
- [ 1.138217] axp15_dcdc2: 1000 <--> 2550 mV at 1350 mV
- [ 1.138762] axp15_dcdc3: 600 <--> 1520 mV at 900 mV
- [ 1.139463] axp15_dcdc4: 600 <--> 3300 mV at 900 mV
- [ 1.140097] axp15_dcdc5: 1100 <--> 3400 mV at 2100 mV
- [ 1.140690] axp15_sw0: at 700 mV
- [ 1.142261] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 1.143492] Bluetooth: Core ver 2.16
- [ 1.143699] NET: Registered protocol family 31
- [ 1.143710] Bluetooth: HCI device and connection manager initialized
- [ 1.143725] Bluetooth: HCI socket layer initialized
- [ 1.143736] Bluetooth: L2CAP socket layer initialized
- [ 1.143768] Bluetooth: SCO socket layer initialized
- [ 1.144347] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.147018] Switching to clocksource arch_sys_counter
- [ 1.170365] FS-Cache: Loaded
- [ 1.170924] CacheFiles: Loaded
- [ 1.194105] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
- [ 1.194128] [sunxi_hci_sunxi]: get usb_restrict_flag failed
- [ 1.194139] [sunxi_hci_sunxi]: get usb_regulator is failed
- [ 1.194158] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
- [ 1.194171] [sunxi_hci_sunxi]: get usb_restrict_flag failed
- [ 1.194181] [sunxi_hci_sunxi]: get usb_regulator is failed
- [ 1.194430] [sunxi_hci_sunxi]: sunxi-ehci2(restrict_gpio) is invalid
- [ 1.194446] [sunxi_hci_sunxi]: get usb_restrict_flag failed
- [ 1.194456] [sunxi_hci_sunxi]: get usb_regulator is failed
- [ 1.194472] [sunxi_hci_sunxi]: sunxi-ohci2(restrict_gpio) is invalid
- [ 1.194487] [sunxi_hci_sunxi]: get usb_restrict_flag failed
- [ 1.194499] [sunxi_hci_sunxi]: get usb_regulator is failed
- [ 1.194538] [sunxi_hci_sunxi]: sunxi-ehci3(restrict_gpio) is invalid
- [ 1.194552] [sunxi_hci_sunxi]: sunxi-ehci3(drv vbus) is invalid
- [ 1.194564] [sunxi_hci_sunxi]: get usb_restrict_flag failed
- [ 1.194574] [sunxi_hci_sunxi]: get usb_regulator is failed
- [ 1.194589] [sunxi_hci_sunxi]: sunxi-ohci3(restrict_gpio) is invalid
- [ 1.194602] [sunxi_hci_sunxi]: sunxi-ohci3(drv vbus) is invalid
- [ 1.194615] [sunxi_hci_sunxi]: get usb_restrict_flag failed
- [ 1.194626] [sunxi_hci_sunxi]: get usb_regulator is failed
- [ 1.195919] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
- [ 1.195943] get usbc(0) usb_restrict_flag failed
- [ 1.195961] no usbc(0) det_vbus gpio and try to axp det_pin
- [ 1.195974] get usbc0(usb_restrict pin) failed
- [ 1.196928] [ddrfreq] dram_clk value is 2a0
- [ 1.196939] [ddrfreq] sunxi_dramfreq_max=672000
- [ 1.196949] [ddrfreq] dram_type value is 3
- [ 1.196959] [ddrfreq] dram_zq value is 3f3fdd
- [ 1.196969] [ddrfreq] dram_odt_en value is 0
- [ 1.196979] [ddrfreq] dram_para1 value is 10f40800
- [ 1.196989] [ddrfreq] dram_para2 value is 1200
- [ 1.196999] [ddrfreq] dram_mr0 value is 1a50
- [ 1.197009] [ddrfreq] dram_mr1 value is 40
- [ 1.197018] [ddrfreq] dram_mr2 value is 10
- [ 1.197028] [ddrfreq] dram_mr3 value is 0
- [ 1.197037] [ddrfreq] dram_tpr0 value is 4e214ea
- [ 1.197047] [ddrfreq] dram_tpr1 value is 4214ad
- [ 1.197058] [ddrfreq] dram_tpr2 value is 10a75030
- [ 1.197068] [ddrfreq] dram_tpr3 value is 0
- [ 1.197078] [ddrfreq] dram_tpr4 value is 0
- [ 1.197087] [ddrfreq] dram_tpr5 value is 0
- [ 1.197097] [ddrfreq] dram_tpr6 value is 0
- [ 1.197299] [ddrfreq] dram_tpr7 value is 0
- [ 1.197309] [ddrfreq] dram_tpr8 value is 0
- [ 1.197319] [ddrfreq] dram_tpr9 value is 0
- [ 1.197329] [ddrfreq] dram_tpr10 value is 0
- [ 1.197338] [ddrfreq] dram_tpr11 value is 0
- [ 1.197348] [ddrfreq] dram_tpr12 value is a8
- [ 1.197357] [ddrfreq] sunxi_dramfreq_min=168000
- [ 1.197367] [ddrfreq] dram_tpr13 value is 23
- [ 1.208399] [ddrfreq] LV_count value is 3
- [ 1.208425] [ddrfreq] ---------------Dram V-F Table---------------
- [ 1.208437] [ddrfreq] voltage = 900mv frequency = 672000KHz
- [ 1.208447] [ddrfreq] voltage = 800mv frequency = 168000KHz
- [ 1.208457] [ddrfreq] voltage = 800mv frequency = 0KHz
- [ 1.208467] [ddrfreq] --------------------------------------------
- [ 1.208598] [ddrfreq] last_vdd=900
- [ 1.208612] [ddrfreq] __sram_start: 0xc09b8000, __sram_end: 0xc09b9078, __sram_text_start: 0xf0014000, __sram_data_end: 0xf0015078
- [ 1.208625] [ddrfreq] sunxi dramfreq probe ok!
- [ 1.209132] NET: Registered protocol family 2
- [ 1.209443] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 1.210363] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 1.213211] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 1.215080] TCP: Hash tables configured (established 131072 bind 65536)
- [ 1.215092] TCP: reno registered
- [ 1.215106] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.215161] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.215596] NET: Registered protocol family 1
- [ 1.216028] RPC: Registered named UNIX socket transport module.
- [ 1.216040] RPC: Registered udp transport module.
- [ 1.216049] RPC: Registered tcp transport module.
- [ 1.216059] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.216311] Unpacking initramfs...
- [ 1.696102] Freeing initrd memory: 2516K
- [ 1.696843] [powernow inf] module init
- [ 1.697163] [powernow inf] create class sw_powernow done
- [ 1.697176] [pm]aw_pm_init!
- [ 1.697189] standby_mode = 1.
- [ 1.697199] wakeup src cnt is : 3.
- [ 1.697210] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
- [ 1.697222] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
- [ 1.697234] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
- [ 1.697246] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
- [ 1.697257] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x18
- [ 1.697269] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
- [ 1.697281] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
- [ 1.697293] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x2018
- [ 1.697305] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
- [ 1.697330] [wifi]: select wifi: ap6330 !!
- [ 1.697728] [ap6xxx]: module power name axp22_dldo1
- [ 1.697742] [ap6xxx]: module power ext1 name axp15_cldo3
- [ 1.697753] [ap6xxx]: module power ext2 name axp22_ldoio0
- [ 1.697763] [ap6xxx]: sdio_power name
- [ 1.697904] [ap6xxx]: ap6xxx module power set by axp.
- [ 1.698747] [ap6xxx]: regulator axp22_dldo1 on.
- [ 1.699342] [ap6xxx]: regulator axp15_cldo3 on.
- [ 1.699426] [ap6xxx]: regulator axp22_ldoio0 on.
- [ 1.699590] [ap6xxx]: set cko2 32k clk out
- [ 1.699681] [wifi_pm]: wifi gpio init is OK !!
- [ 1.699877] sunxi_reg_init enter
- [ 1.701543] audit: initializing netlink socket (disabled)
- [ 1.701597] type=2000 audit(1.670:1): initialized
- [ 1.703188] highmem bounce pool size: 64 pages
- [ 1.705260] NTFS driver 2.1.30 [Flags: R/W].
- [ 1.705439] fuse init (API version 7.18)
- [ 1.706476] msgmni has been set to 1187
- [ 1.706524] SELinux: Registering netfilter hooks
- [ 1.709021] io scheduler noop registered
- [ 1.709034] io scheduler deadline registered
- [ 1.709143] io scheduler cfq registered (default)
- [ 1.709963] GTBUS_PMU GTBUS_PMU: probed
- [ 1.710375] pwm module init!
- [ 1.711726] sunxi_uart_init()1442 - Sunxi Uart driver init ...
- [ 1.711755] sw_uart_get_devinfo()1426 - uart0 fetch uart_regulator from sysconfig failed
- [ 1.711776] sw_uart_get_devinfo()1426 - uart2 fetch uart_regulator from sysconfig failed
- [ 1.712593] uart0: ttyS0 at MMIO 0x7000000 (irq = 32) is a SUNXI
- [ 1.712617] sw_console_setup()1186 - console setup baud 115200 parity n bits 8, flow n
- [ 1.808617] console [ttyS0] enabled
- [ 3.948774] uart2: ttyS2 at MMIO 0x7000800 (irq = 34) is a SUNXI
- [ 3.957398] G2D: drv_g2d_init
- [ 3.960883] G2D: Module initialized.major:251
- [ 3.973438] loop: module loaded
- [ 3.976951] sunxi_hw_init: sunxi debug register driver init
- [ 3.983945] sunxi_spi_init()2048 - [Jun 23 2014 17:04:15]Sunxi SPI init ...
- [ 3.991870] sunxi_spi_chan_cfg()1368 - [spi-0] fetch spi_regulator from sysconfig failed
- [ 4.000930] sunxi_spi_chan_cfg()1368 - [spi-1] fetch spi_regulator from sysconfig failed
- [ 4.009947] sunxi_spi_chan_cfg()1368 - [spi-2] fetch spi_regulator from sysconfig failed
- [ 4.018953] sunxi_spi_chan_cfg()1368 - [spi-3] fetch spi_regulator from sysconfig failed
- [ 4.028268] tun: Universal TUN/TAP device driver, 1.6
- [ 4.033874] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 4.041088] PPP generic driver version 2.4.2
- [ 4.046300] PPP BSD Compression module registered
- [ 4.051574] PPP Deflate Compression module registered
- [ 4.057902] PPP MPPE Compression module registered
- [ 4.063223] NET: Registered protocol family 24
- [ 4.068228] PPTP driver version 0.8.5
- [ 4.073114] start: sunxi_open_usb_clock
- [ 4.077508] end: sunxi_open_usb_clock
- [ 4.081804] get usbc0_regulator is failed
- [ 4.286304] sunxi_controller_mode:device!
- [ 4.291815] sunxi_controller_mode:NULL!
- [ 4.296072] start: sunxi_close_usb_clock
- [ 4.300462] end: sunxi_close_usb_clock
- [ 4.304622] otgc_work_mode:0
- [ 4.308051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.315383] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc0a2a80c
- [ 4.326744] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
- [ 4.333869] [sunxi_hci_sunxi]: clk_prepare_enable: hci_ahb_gate
- [ 4.340476] [sunxi_hci_sunxi]: [sunxi-ehci1]: open hci clock,usbc_no:1, is_ohci:0
- [ 4.348806] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
- [ 4.355292] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.364217] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 4.372753] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf0a00000
- [ 4.397132] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 4.404672] hub 1-0:1.0: USB hub found
- [ 4.408886] hub 1-0:1.0: 1 port detected
- [ 4.413823] [sunxi_hci_sunxi]: [sunxi-ehci2]: probe, pdev->name: sunxi-ehci, pdev->id: 2, sunxi_ehci: 0xc0a2aa14
- [ 4.425159] [sunxi_hci_sunxi]: [sunxi-ehci2]: open clock, is_open: 0
- [ 4.432277] [sunxi_hci_sunxi]: [sunxi-ehci2]: open hci clock,usbc_no:2, is_ohci:0
- [ 4.440607] [sunxi_hci_sunxi]: [sunxi-ehci2]: Set USB Power ON
- [ 4.447086] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.456008] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
- [ 4.464534] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf0a01000
- [ 4.487132] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
- [ 4.494579] hub 2-0:1.0: USB hub found
- [ 4.498781] hub 2-0:1.0: 1 port detected
- [ 4.503690] [sunxi_hci_sunxi]: [sunxi-ehci3]: probe, pdev->name: sunxi-ehci, pdev->id: 3, sunxi_ehci: 0xc0a2ac1c
- [ 4.515126] [sunxi_hci_sunxi]: [sunxi-ehci3]: open clock, is_open: 0
- [ 4.522203] [sunxi_hci_sunxi]: [sunxi-ehci3]: open hci clock,usbc_no:3, is_ohci:0
- [ 4.530527] [sunxi_hci_sunxi]: [sunxi-ehci3]: Set USB Power ON
- [ 4.537007] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.545924] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
- [ 4.554488] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf0a02000
- [ 4.577128] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
- [ 4.584564] hub 3-0:1.0: USB hub found
- [ 4.588785] hub 3-0:1.0: 1 port detected
- [ 4.593852] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.600874] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc0a2a910
- [ 4.612201] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
- [ 4.619308] [sunxi_hci_sunxi]: [sunxi-ohci1]: open hci clock,usbc_no:1, is_ohci:1
- [ 4.627661] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 4.636184] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
- [ 4.644639] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf0a00400
- [ 4.711993] hub 4-0:1.0: USB hub found
- [ 4.716169] hub 4-0:1.0: 1 port detected
- [ 4.721110] [sunxi_hci_sunxi]: [sunxi-ohci3]: probe, pdev->name: sunxi-ohci, pdev->id: 3, sunxi_ohci: 0xc0a2ad20
- [ 4.732454] [sunxi_hci_sunxi]: [sunxi-ohci3]: open clock, is_open: 0
- [ 4.739559] [sunxi_hci_sunxi]: [sunxi-ohci3]: open hci clock,usbc_no:3, is_ohci:1
- [ 4.747902] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 4.756422] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 5
- [ 4.764870] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf0a02400
- [ 4.832014] hub 5-0:1.0: USB hub found
- [ 4.836194] hub 5-0:1.0: 1 port detected
- [ 4.841538] Initializing USB Mass Storage driver...
- [ 4.847335] usbcore: registered new interface driver usb-storage
- [ 4.854003] USB Mass Storage support registered.
- [ 4.859361] usbcore: registered new interface driver ums-alauda
- [ 4.866134] usbcore: registered new interface driver ums-cypress
- [ 4.873035] usbcore: registered new interface driver ums-datafab
- [ 4.879935] usbcore: registered new interface driver ums_eneub6250
- [ 4.886982] usbcore: registered new interface driver ums-freecom
- [ 4.893867] usbcore: registered new interface driver ums-isd200
- [ 4.900649] usbcore: registered new interface driver ums-jumpshot
- [ 4.907634] usbcore: registered new interface driver ums-karma
- [ 4.914298] usbcore: registered new interface driver ums-onetouch
- [ 4.921360] usbcore: registered new interface driver ums-realtek
- [ 4.928210] usbcore: registered new interface driver ums-sddr09
- [ 4.934975] usbcore: registered new interface driver ums-sddr55
- [ 4.941809] usbcore: registered new interface driver ums-usbat
- [ 4.948724] usbcore: registered new interface driver usbserial
- [ 4.955200] usbserial: USB Serial Driver core
- [ 4.960305] usbcore: registered new interface driver option
- [ 4.966662] USB Serial support registered for GSM modem (1-port)
- [ 4.974902] file system registered
- [ 4.982303] gadget: Mass Storage Function, version: 2009/09/11
- [ 4.988933] gadget: Number of LUNs=3
- [ 4.992998] lun0: LUN: removable file: (no medium)
- [ 4.998502] lun1: LUN: removable file: (no medium)
- [ 5.003917] lun2: LUN: removable file: (no medium)
- [ 5.010165] android_bind, serial_unique = 0
- [ 5.014824] gadget: android_usb ready
- [ 5.019827] mousedev: PS/2 mouse device common for all mice
- [ 5.026986] input: sunxi-keyboard as /devices/virtual/input/input1
- [ 5.034450] usbcore: registered new interface driver xpad
- [ 5.041240] sunxi_rtc_init(736): sunxi rtc device register!
- [ 5.048127] rtc_gettime(323): read time 1970-1-1 1:0:9
- [ 5.054108] alarm_gettime(460): get alarm time 1970-1-1 1:0:0 success!
- [ 5.061648] rtc_gettime(323): read time 1970-1-1 1:0:9
- [ 5.067778] rtc0 rtc0: rtc core: registered rtc0 as rtc0
- [ 5.073738] sunxi_rtc_probe(690)!
- [ 5.077958] sunxi cedar version 0.1
- [ 5.082009] [cedar]: install start!!!
- [ 5.086718] [cedar]: install end!!!
- [ 5.094887] axp22_aldo1: Failed to create debugfs directory
- [ 5.104920] axp22_dcdc4: Failed to create debugfs directory
- [ 5.120599] axp15_dcdc4: Failed to create debugfs directory
- [ 5.127923] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 5.137385] Bluetooth: HCI UART driver ver 2.2
- [ 5.142324] Bluetooth: HCI H4 protocol initialized
- [ 5.147700] Bluetooth: HCI Realtek H5 protocol initialized
- [ 5.154183] [cpu_freq] INF: merge_cluster_tables: index: 0, freq: 1800000
- [ 5.162234] [cpu_freq] INF: merge_cluster_tables: index: 1, freq: 1608000
- [ 5.169799] [cpu_freq] INF: merge_cluster_tables: index: 2, freq: 1536000
- [ 5.177353] [cpu_freq] INF: merge_cluster_tables: index: 3, freq: 1440000
- [ 5.184892] [cpu_freq] INF: merge_cluster_tables: index: 4, freq: 1296000
- [ 5.192445] [cpu_freq] INF: merge_cluster_tables: index: 5, freq: 1008000
- [ 5.200107] [cpu_freq] INF: merge_cluster_tables: index: 6, freq: 912000
- [ 5.207621] [cpu_freq] INF: merge_cluster_tables: index: 7, freq: 768000
- [ 5.215096] [cpu_freq] INF: merge_cluster_tables: index: 8, freq: 600000
- [ 5.222558] [cpu_freq] INF: merge_cluster_tables: index: 9, freq: 600000
- [ 5.230016] [cpu_freq] INF: merge_cluster_tables: index: 10, freq: 564000
- [ 5.237619] [cpu_freq] INF: merge_cluster_tables: index: 11, freq: 504000
- [ 5.245158] [cpu_freq] INF: merge_cluster_tables: index: 12, freq: 456000
- [ 5.252738] [cpu_freq] INF: merge_cluster_tables: index: 13, freq: 432000
- [ 5.260294] [cpu_freq] INF: merge_cluster_tables: index: 14, freq: 360000
- [ 5.267850] [cpu_freq] INF: merge_cluster_tables: index: 15, freq: 300000
- [ 5.275392] [cpu_freq] INF: merge_cluster_tables: index: 16, freq: 240000
- [ 5.282963] [cpu_freq] INF: merge_cluster_tables: End, table: e6136b40, count: 17
- [ 5.291323] axp22_dcdc3: Failed to create debugfs directory
- [ 5.297542] axp15_dcdc1: Failed to create debugfs directory
- [ 5.303751] [cpu_freq] INF: sunxi_cpufreq_init, get cpu frequency from sysconfig, c0_max: 1200MHz, c0_min: 480MHz, c1_max: 1800MHz, c1_min: 600MHz
- [ 5.321389] [cpu_freq] INF: sunxi register cpufreq driver succeed
- [ 5.328177] [cpu_freq] INF: sunxi register bL notifier succeed
- [ 5.334654] [cpu_freq] INF: sunxi_cpufreq_init: done!
- [ 5.340469] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.71 2014-05-26 14:45) Compiled in Jun 23 2014 at 17:03:58
- [ 5.351893] [mmc]: sunxi_mci_init
- [ 5.355587] [mmc]: get mmc0's sdc_ex_dly_used failed,use default dly
- [ 5.362706] [mmc]: get mmc1's sdc_ex_dly_used failed,use default dly
- [ 5.369796] [mmc]: get mmc2's sdc_ex_dly_used failed,use default dly
- [ 5.376858] [mmc]: MMC host used card: 0x7, boot card: 0x4, io_card 2
- [ 5.385181] [mmc]: --2 sdc 2 - 48000000
- [ 5.389850] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.400748] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.410454] [mmc]: sdc2 Probe: base:0xf1c11000 irq:94 sg_cpu:ffdd2000(461f4000) ret 0.
- [ 5.420877] [mmc]: --2 sdc 0 - 48000000
- [ 5.425745] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.436690] [mmc]: sdc0 Probe: base:0xf1c0f000 irq:92 sg_cpu:ffdd1000(461f7000) ret 0.
- [ 5.445519] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.455858] [mmc]: sdc0: no card detected, try to shutdown io voltage.
- [ 5.464947] [mmc]: --2 sdc 1 - 48000000
- [ 5.469557] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.480473] [mmc]: sdc1 Probe: base:0xf1c10000 irq:93 sg_cpu:ffdd0000(461f9000) ret 0.
- [ 5.489286] [mmc]: sdc1: no card detected, try to shutdown io voltage.
- [ 5.508650] usbcore: registered new interface driver usbhid
- [ 5.514846] usbhid: USB HID core driver
- [ 5.520060] ashmem: initialized
- [ 5.523812] logger: created 256K log 'log_main'
- [ 5.529149] logger: created 256K log 'log_events'
- [ 5.534386] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 52, RTO !!
- [ 5.542811] logger: created 256K log 'log_radio'
- [ 5.547991] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 52, RTO !!
- [ 5.556232] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.568076] logger: created 256K log 'log_system'
- [ 5.574324] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.586447] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 8, RTO !!
- [ 5.594618] *******************Try sdio*******************
- [ 5.601553] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5, RTO !!
- [ 5.610038] axp device register ok and device_create_file ok
- [ 5.616333] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5, RTO !!
- [ 5.625211] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5, RTO !!
- [ 5.634178] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5, RTO !!
- [ 5.642250] *******************Try sd *******************
- [ 5.649078] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55, RTO !!
- [ 5.657522] sunxi_snddaudio_init, line:206
- [ 5.662072] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55, RTO !!
- [ 5.670331] sunxi_snddaudio_init, line:212, daudio_used:1
- [ 5.676339] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55, RTO !!
- [ 5.684737] soc-audio soc-audio.4: ASoC machine snddaudio should use snd_soc_register_card()
- [ 5.694133] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55, RTO !!
- [ 5.702284] *******************Try mmc*******************
- [ 5.708352] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.718940] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.729180] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.739720] input: headset as /devices/virtual/input/input2
- [ 5.746257] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.762932] asoc: sndvir_audio <-> s_i2s1 mapping ok
- [ 5.768502] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.783026] soc-audio soc-audio.0: ASoC machine sndhdmi should use snd_soc_register_card()
- [ 5.794399] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
- [ 5.801902] u32 classifier
- [ 5.804913] Actions configured
- [ 5.808714] Netfilter messages via NETLINK v0.30.
- [ 5.814017] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 5.820815] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.831798] ctnetlink v0.93: registering with nfnetlink.
- [ 5.837807] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 5.845544] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 5.852590] xt_time: kernel timezone is -0000
- [ 5.857473] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.868032] IPv4 over IPv4 tunneling driver
- [ 5.873719] gre: GRE over IPv4 demultiplexor driver
- [ 5.879170] ip_gre: GRE over IPv4 tunneling driver
- [ 5.885638] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.891797] arp_tables: (C) 2002 David S. Miller
- [ 5.897000] TCP: cubic registered
- [ 5.900745] Initializing XFRM netlink socket
- [ 5.905763] NET: Registered protocol family 10
- [ 5.911940] Mobile IPv6
- [ 5.914694] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.920949] IPv6 over IPv4 tunneling driver
- [ 5.927249] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 5.937695] [mmc]: sdc2 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 5.948895] NET: Registered protocol family 17
- [ 5.953870] NET: Registered protocol family 15
- [ 5.958972] Bluetooth: RFCOMM TTY layer initialized
- [ 5.964408] Bluetooth: RFCOMM socket layer initialized
- [ 5.970134] Bluetooth: RFCOMM ver 1.11
- [ 5.974299] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 5.980278] Bluetooth: BNEP filters: protocol multicast
- [ 5.986087] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 5.992950] L2TP core driver, V2.0
- [ 5.996741] PPPoL2TP kernel driver, V2.0
- [ 6.001239] [mmc]: sdc2 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
- [ 6.011993] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 6.020535] ThumbEE CPU extension supported.
- [ 6.025298] Registering SWP/SWPB emulation handler
- [ 6.030802] mmc0: new high speed MMC card at address 0001
- [ 6.038152] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
- [ 6.043615] mmcblk0boot0: mmc0:0001 AWMB3R partition 1 4.00 MiB
- [ 6.050434] mmcblk0boot1: mmc0:0001 AWMB3R partition 2 4.00 MiB
- [ 6.058927] axp15_dcdc5: incomplete constraints, leaving on
- [ 6.059253] mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 >
- [ 6.059299] mmcblk0: p1 size 27381760 extends beyond EOD, truncated
- [ 6.065442] mmcblk0boot1: unknown partition table
- [ 6.066618] mmcblk0boot0: unknown partition table
- [ 6.066957] *******************mmc init ok *******************
- [ 6.095941] axp15_dcdc4: incomplete constraints, leaving on
- [ 6.102382] axp15_dcdc1: incomplete constraints, leaving on
- [ 6.108820] axp15_bldo2: incomplete constraints, leaving on
- [ 6.115095] axp15_bldo1: incomplete constraints, leaving on
- [ 6.121457] axp15_aldo1: incomplete constraints, leaving on
- [ 6.127780] axp22_ldoio1: incomplete constraints, leaving on
- [ 6.134153] axp22_dcdc5: incomplete constraints, leaving on
- [ 6.140440] axp22_dcdc4: incomplete constraints, leaving on
- [ 6.146713] axp22_dcdc3: incomplete constraints, leaving on
- [ 6.153040] axp22_dcdc1: incomplete constraints, leaving on
- [ 6.159328] axp22_dc5ldo: incomplete constraints, leaving on
- [ 6.165698] axp22_eldo3: incomplete constraints, leaving on
- [ 6.171985] axp22_eldo2: incomplete constraints, leaving on
- [ 6.178308] axp22_dldo2: incomplete constraints, leaving on
- [ 6.184583] axp22_aldo3: incomplete constraints, leaving on
- [ 6.190872] axp22_aldo2: incomplete constraints, leaving on
- [ 6.197303] otg_wakelock_init: No USB transceiver found
- [ 6.203428] rtc_gettime(323): read time 1970-1-1 1:0:10
- [ 6.209312] rtc0 rtc0: setting system clock to 1970-01-01 01:00:10 UTC (3610)
- [ 6.217805] input: sunxi-ths as /devices/virtual/input/input3
- [ 6.224851] suxi_ths: Kernel Thermal management registered
- [ 6.231530] suxi_ths: Kernel Thermal management registered
- [ 6.238460] sunxi_ths_bind : thermal-budget-0
- [ 6.243141] ths_zone trip = 60, adjust lower = 0, upper = 1
- [ 6.249607] ths_zone trip = 75, adjust lower = 1, upper = 2
- [ 6.255851] ths_zone trip = 85, adjust lower = 2, upper = 5
- [ 6.262105] ths_zone trip = 95, adjust lower = 5, upper = 9
- [ 6.268361] ths_zone trip = 105, adjust lower = 0, upper = 0
- [ 6.274704] sunxi_ths_bind : thermal-budget-0
- [ 6.279395] ths_zone trip = 105, adjust lower = 0, upper = 9
- [ 6.285940] CPU Budget:Register notifier
- [ 6.290342] CPU Budget:register Success
- [ 6.294632] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 6.309766] ALSA device list:
- [ 6.313084] #0: snddaudio
- [ 6.316205] #1: sndhdmi
- [ 6.319427] Freeing init memory: 316K
- [ 6.328415] SELinux: 512 avtab hash slots, 1360 rules.
- [ 6.334560] SELinux: 512 avtab hash slots, 1360 rules.
- [ 6.340339] SELinux: 1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats
- [ 6.348351] SELinux: 84 classes, 1360 rules
- [ 6.353851] SELinux: Completing initialization.
- [ 6.359031] SELinux: Setting up existing superblocks.
- [ 6.364792] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 6.372802] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- [ 6.381097] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- [ 6.389689] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- [ 6.397507] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 6.405605] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
- [ 6.414728] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- [ 6.427568] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- [ 6.435273] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- [ 6.442991] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- [ 6.453140] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- [ 6.461446] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- [ 6.470318] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 6.478445] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 6.635377] type=1403 audit(3610.910:2): policy loaded auid=4294967295 ses=4294967295
- [ 6.644308] SELinux: Loaded policy from /sepolicy
- [ 6.652555] type=1404 audit(3610.940:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 8.072666] init: could not import file 'init.sun9i.3gdongle.rc' from '/init.sun9i.rc'
- [ 8.082114] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 8.233963] init: /dev/hw_random not found
- [ 8.253941] [NAND][NAND]nand init start, nand0_used_flag is 0
- [ 8.260376] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
- [ 8.268000] [NAND]run on A80
- [ 8.271218] nand interrupte ch0 irqno: 102 register ok
- [ 8.276938] nand interrupte ch1, irqno: 101 register ok
- [ 8.283919] [NAND]nand driver is disabled
- [ 8.367248] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 8.375731] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 8.385313] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 8.393792] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 8.402046] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 8.527207] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 8.545072] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.554163] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
- [ 8.580347] EXT4-fs (mmcblk0p10): recovery complete
- [ 8.586625] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- [ 8.598529] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- [ 8.737152] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
- [ 8.786878] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
- [ 8.792097] e2fsck: /dev/block/by-name/cache: clean, 12/40960 files, 5257/163840 blocks
- [ 8.808063] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
- [ 8.819138] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- [ 8.977631] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 114506
- [ 8.986914] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 114491
- [ 8.996093] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted
- [ 9.002019] EXT4-fs (mmcblk0p1): recovery complete
- [ 9.014947] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- [ 9.026690] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
- [ 9.137175] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
- [ 9.155162] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
- [ 9.160354] e2fsck: /dev/block/by-name/UDISK: clean, 736/855120 files, 123717/3414527 blocks
- [ 9.177412] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
- [ 9.189941] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
- [ 9.371810] [DISP]disp_module_init
- [ 9.377361] [DISP]disp_probe
- [ 9.380723] [DISP] IEP_Deu_Init,line:216: deu_mode1 not exist.
- [ 9.397207] [DISP] lcd_panel_parameter_check,line:372: lcd0para is not used
- [ 9.407177] [DISP] lcd_panel_parameter_check,line:368: get lcd1para lcd_used fail
- [ 9.415806] [DISP] disp_lcd_gpio_init,line:1909: lcd 2 is not register
- [ 9.427179] [DISP] disp_init_hdmi,line:488: screen 0 do not support HDMI TYPE!
- [ 9.435568] [DISP] disp_init_hdmi,line:488: screen 2 do not support HDMI TYPE!
- [ 9.444301] [DISP] disp_init_connections,line:133: smbl's set manager is NULL
- [ 9.452604] [DISP] disp_init_connections,line:139: capture's set manager is NULL
- [ 9.461191] [DISP] disp_init_connections,line:145: smcl's set manager is NULL
- [ 9.469505] [DISP]Fb_Init
- [ 9.472538] disp_init.disp_composer_mode = 1
- [ 9.477364] [DISP] parser_disp_init_para,line:130: fetch script data disp_init.screen2_output_type fail
- [ 9.488191] [DISP] parser_disp_init_para,line:143: invalid screen0_output_type 0
- [ 9.496769] [DISP] parser_disp_init_para,line:147: fetch script data disp_init.screen2_output_mode fail
- [ 9.507607] [DISP] parser_disp_init_para,line:208: fetch script data disp_init.fb2_format fail
- [ 9.517557] [DISP] parser_disp_init_para,line:213: fetch script data disp_init.fb2_scaler_mode_enable fail
- [ 9.528676] [DISP] parser_disp_init_para,line:218: fetch script data disp_init.fb2_width fail
- [ 9.538525] [DISP] parser_disp_init_para,line:223: fetch script data disp_init.fb2_height fail
- [ 9.548639] sunxi_map_kernel ok, phys_addr=0x6d400000, size=0xfd2000, virt_addr=0xe7eee000
- [ 9.576146] [DISP]disp_probe finish
- [ 9.580280] [DISP]capture_module_init
- [ 9.585404] [DISP]capture_probe
- [ 9.589101] [DISP]capture finish
- [ 9.592710] [DISP]disp_module_init finish
- [ 9.619999] [LCD]lcd_module_init
- [ 9.624627] [LCD]lcd_module_init finish
- [ 9.647589] [DISP] disp_get_hdmi,line:41: screen_id 0 do not support HDMI TYPE!
- [ 9.656073] [DISP] bsp_disp_set_hdmi_func,line:1296: get hdmi0 failed!
- [ 9.823682] axp22_dcdc2: Failed to create debugfs directory
- [ 9.833428] =========================================================
- [ 9.840603] GPU Init Information
- [ 9.847871] gpu voltage : 900 mV
- [ 9.852266] pll9 clock frequency: 384 MHz
- [ 9.856750] core clock frequency: 384 MHz
- [ 9.861263] mem clock frequency : 384 MHz
- [ 9.865747] axi clock frequency : 320 MHz
- [ 9.870243] =========================================================
- [ 9.958349] [VFE]Welcome to Video Front End driver
- [ 9.964480] [VFE]pdev->id = 0
- [ 9.967823] [VFE]dev->mipi_sel = 0
- [ 9.971598] [VFE]dev->vip_sel = 0
- [ 9.975279] [VFE]dev->isp_sel = 0
- [ 9.985379] [VFE]..........................vfe clk open!.......................
- [ 9.993938] [VFE]vfe_init end
- [ 9.997302] [VFE]probe_work_handle start!
- [ 10.001773] [VFE]v4l2 subdev register input_num = 0
- [ 10.008210] axp22_aldo2: Failed to create debugfs directory
- [ 10.015424] axp15_aldo2: Failed to create debugfs directory
- [ 10.021789] axp22_eldo1: Failed to create debugfs directory
- [ 10.028534] axp15_cldo2: Failed to create debugfs directory
- [ 10.034962] [VFE]vfe sensor detect start! input_num = 0
- [ 10.040813] [VFE]Find sensor name is "ov16825", i2c address is 6c, type is "RAW" !
- [ 10.049426] [VFE]Sub device register "ov16825" start!
- [ 10.055162] [VFE]v4l2_device_register_subdev return 0
- [ 10.060793] [VFE]registered sensor subdev is OK!
- [ 10.065954] [VFE]Check sensor!
- [ 10.069583] sun fd version 0.5
- [ 10.073231] [fd]: install start!!!
- [ 10.087210] open_clk:fd_clk_rate = 320000000
- [ 10.092830] [OV16825]CSI_SUBDEV_PWR_ON!
- [ 10.098245] register fd_early_suspend @ probe handle!
- [ 10.103882] [VFE]mclk on
- [ 10.106705] [fd]: install end!!!
- [ 10.117142] [VFE_WARN]os_gpio_write, hdl is NULL
- [ 10.159061] init: /dev/hw_random not found
- [ 10.171512] [OV16825]sensor_init
- [ 10.175249] [VFE CCI ERR] Status error at addr_8bit = 6c, wr_flag = 1!
- [ 10.187232] [VFE CCI ERR] Status error at addr_8bit = 6c, wr_flag = 1!
- [ 10.187506] binder: 1490:1490 transaction failed 29189, size 0-0
- [ 10.201735] [VFE CCI ERR] Status error at addr_8bit = 6c, wr_flag = 1!
- [ 10.206420] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 10.218681] [OV16825]sensor read retry=2
- [ 10.223169] [OV16825]error at sensor_detect
- [ 10.228039] [OV16825]chip found is not an target chip.
- [ 10.233886] [OV16825]CSI_SUBDEV_PWR_OFF!
- [ 10.238392] [VFE]mclk off
- [ 10.241477] [VFE_WARN]os_gpio_write, hdl is NULL
- [ 10.257289] [VFE_WARN]os_gpio_write, hdl is NULL
- [ 10.275019] [VFE]vfe sensor subdev unregister!
- [ 10.280372] [VFE]Sub device register "ov16825" failed!
- [ 10.287578] [VFE_ERR]vfe sensor register check error at input_num = 0
- [ 10.294975] [VFE]read ini start
- [ 10.299021] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_test_param.ini"
- [ 10.366767] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_3a_param.ini"
- [ 10.421450] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_iso_param.ini"
- [ 10.466584] keyname:ctp_para subname:ctp_power_ldo ,get error!
- [ 10.474841] keyname:ctp_para subname:ctp_power_ldo_vol ,get error!
- [ 10.487239] keyname:ctp_para subname:ctp_power_io ,get error!
- [ 10.493988] keyname:ctp_para subname:ctp_wakeup ,get error!
- [ 10.500593] get sysconfig para erro!
- [ 10.504727] get_device_para_value:get subname:stk3x1x error! val.val:0
- [ 10.512213] get_detect_list: script_get_item err.support_number = 3.
- [ 10.519800] get_device_para_value:get subname:jsa1127 error! val.val:0
- [ 10.527235] get_detect_list: script_get_item err.support_number = 2.
- [ 10.534695] get_device_para_value:get subname:jsa1212 error! val.val:0
- [ 10.542110] get_detect_list: script_get_item err.support_number = 1.
- [ 10.549378] get_device_para_value:get subname:bmg160_gyr error! val.val:0
- [ 10.557077] get_detect_list: script_get_item err.support_number = 1.
- [ 10.564303] get sysconfig para erro!
- [ 10.568327] ctp_wakeup: !!!!gpio data 0
- [ 10.574923] [VFE_WARN]fetch iso_param_30 from isp_iso_100_cfg failed, set iso_param_30 = 0!
- [ 10.585370] [VFE_WARN]fetch iso_param_31 from isp_iso_100_cfg failed, set iso_param_31 = 0!
- [ 10.594993] [VFE_WARN]fetch iso_param_32 from isp_iso_100_cfg failed, set iso_param_32 = 0!
- [ 10.611949] [VFE_WARN]fetch iso_param_33 from isp_iso_100_cfg failed, set iso_param_33 = 0!
- [ 10.621524] ir_fetch_sysconfig_para: IR power key type err!
- [ 10.630249] [VFE_WARN]fetch iso_param_34 from isp_iso_100_cfg failed, set iso_param_34 = 0!
- [ 10.630825] input: sunxi-ir as /devices/virtual/input/s_cir0
- [ 10.646808] [VFE_WARN]fetch iso_param_35 from isp_iso_100_cfg failed, set iso_param_35 = 0!
- [ 10.659038] [VFE_WARN]fetch iso_param_36 from isp_iso_100_cfg failed, set iso_param_36 = 0!
- [ 10.668566] [VFE_WARN]fetch iso_param_30 from isp_iso_200_cfg failed, set iso_param_30 = 0!
- [ 10.678098] [VFE_WARN]fetch iso_param_31 from isp_iso_200_cfg failed, set iso_param_31 = 0!
- [ 10.687475] [VFE_WARN]fetch iso_param_32 from isp_iso_200_cfg failed, set iso_param_32 = 0!
- [ 10.696834] [VFE_WARN]fetch iso_param_33 from isp_iso_200_cfg failed, set iso_param_33 = 0!
- [ 10.697189] get sysconfig para erro!
- [ 10.710628] [VFE_WARN]fetch iso_param_34 from isp_iso_200_cfg failed, set iso_param_34 = 0!
- [ 10.720264] [VFE_WARN]fetch iso_param_35 from isp_iso_200_cfg failed, set iso_param_35 = 0!
- [ 10.729940] [VFE_WARN]fetch iso_param_36 from isp_iso_200_cfg failed, set iso_param_36 = 0!
- [ 10.739669] [VFE_WARN]fetch iso_param_30 from isp_iso_400_cfg failed, set iso_param_30 = 0!
- [ 10.749135] [VFE_WARN]fetch iso_param_31 from isp_iso_400_cfg failed, set iso_param_31 = 0!
- [ 10.758937] [VFE_WARN]fetch iso_param_32 from isp_iso_400_cfg failed, set iso_param_32 = 0!
- [ 10.768376] [VFE_WARN]fetch iso_param_33 from isp_iso_400_cfg failed, set iso_param_33 = 0!
- [ 10.778191] [VFE_WARN]fetch iso_param_34 from isp_iso_400_cfg failed, set iso_param_34 = 0!
- [ 10.788538] [VFE_WARN]fetch iso_param_35 from isp_iso_400_cfg failed, set iso_param_35 = 0!
- [ 10.797971] [VFE_WARN]fetch iso_param_36 from isp_iso_400_cfg failed, set iso_param_36 = 0!
- [ 10.807400] [VFE_WARN]fetch iso_param_30 from isp_iso_800_cfg failed, set iso_param_30 = 0!
- [ 10.816770] [VFE_WARN]fetch iso_param_31 from isp_iso_800_cfg failed, set iso_param_31 = 0!
- [ 10.826105] [VFE_WARN]fetch iso_param_32 from isp_iso_800_cfg failed, set iso_param_32 = 0!
- [ 10.836034] [VFE_WARN]fetch iso_param_33 from isp_iso_800_cfg failed, set iso_param_33 = 0!
- [ 10.845433] [VFE_WARN]fetch iso_param_34 from isp_iso_800_cfg failed, set iso_param_34 = 0!
- [ 10.854840] [VFE_WARN]fetch iso_param_35 from isp_iso_800_cfg failed, set iso_param_35 = 0!
- [ 10.864246] [VFE_WARN]fetch iso_param_36 from isp_iso_800_cfg failed, set iso_param_36 = 0!
- [ 10.873821] [VFE_WARN]fetch iso_param_30 from isp_iso_1600_cfg failed, set iso_param_30 = 0!
- [ 10.883281] [VFE_WARN]fetch iso_param_31 from isp_iso_1600_cfg failed, set iso_param_31 = 0!
- [ 10.893369] [VFE_WARN]fetch iso_param_32 from isp_iso_1600_cfg failed, set iso_param_32 = 0!
- [ 10.902864] [VFE_WARN]fetch iso_param_33 from isp_iso_1600_cfg failed, set iso_param_33 = 0!
- [ 10.912352] [VFE_WARN]fetch iso_param_34 from isp_iso_1600_cfg failed, set iso_param_34 = 0!
- [ 10.921936] [VFE_WARN]fetch iso_param_35 from isp_iso_1600_cfg failed, set iso_param_35 = 0!
- [ 10.931472] [VFE_WARN]fetch iso_param_36 from isp_iso_1600_cfg failed, set iso_param_36 = 0!
- [ 10.941016] [VFE_WARN]fetch iso_param_30 from isp_iso_3200_cfg failed, set iso_param_30 = 0!
- [ 10.950586] [VFE_WARN]fetch iso_param_31 from isp_iso_3200_cfg failed, set iso_param_31 = 0!
- [ 10.960260] [VFE_WARN]fetch iso_param_32 from isp_iso_3200_cfg failed, set iso_param_32 = 0!
- [ 10.969789] [VFE_WARN]fetch iso_param_33 from isp_iso_3200_cfg failed, set iso_param_33 = 0!
- [ 10.979263] [VFE_WARN]fetch iso_param_34 from isp_iso_3200_cfg failed, set iso_param_34 = 0!
- [ 10.988783] [VFE_WARN]fetch iso_param_35 from isp_iso_3200_cfg failed, set iso_param_35 = 0!
- [ 10.998780] [VFE_WARN]fetch iso_param_36 from isp_iso_3200_cfg failed, set iso_param_36 = 0!
- [ 11.021979] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_tuning_param.ini"
- [ 11.070883] [ap6xxx]: get power regulator failed.
- [ 11.076212] gpio ap6xxx_wl_regon set val 1, act val 1
- [ 11.079283] [VFE]Fetch table form "/system/etc/hawkview/ov16825/bin/gamma_tbl.bin"
- [ 11.082029] [VFE]registered actuator device succeed!
- [ 11.083241] [VFE]V4L2 device registered as video0
- [ 11.083273] [VFE]register_early_suspend @ probe handle!
- [ 11.083281] [VFE]..........................vfe clk close!.......................
- [ 11.083308] [VFE]probe_work_handle end!
- [ 11.219369] [ap6xxx]: sdio wifi power state: on
- [ 11.224487] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 11.224651] =========== WLAN placed in POWER ON ========
- [ 11.267245] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 11.349643] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 1 err, cmd 52, RTO !!
- [ 11.358690] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 1 err, cmd 52, RTO !!
- [ 11.366929] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 11.379715] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 11.392626] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 1 err, cmd 8, RTO !!
- [ 11.401842] *******************Try sdio*******************
- [ 11.408513] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 11.437745] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 11.445858] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 11.454227] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 11.468203] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 11.529826] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 11.540261] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 11.606085] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 11.622582] mmc2: new high speed SDIO card at address 0001
- [ 11.633753] bcmsdh_register: Linux Kernel SDIO/MMC Driver
- [ 11.642126] bcm_wlan_get_oob_irq enter.
- [ 11.646509] gpio [355] map to virq [3] ok
- [ 11.659337] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
- [ 11.668408] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
- [ 11.677761] dhdsdio_probe: Disable prop_txstatus
- [ 11.687398] wl_create_event_handler(): thread:wl_event_handler:678 started
- [ 11.689849] tsk Enter, tsk = 0xe44013d8
- [ 11.711291] p2p0: P2P Interface Registered
- [ 11.715982] dhd_attach(): thread:dhd_watchdog_thread:686 started
- [ 11.728990] dhd_attach(): thread:dhd_dpc:688 started
- [ 11.735660] dhd_attach(): thread:dhd_sysioc:68e started
- [ 11.760389] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 11.769943] *******************sdio init ok*******************
- [ 11.776518]
- [ 11.776522] Dongle Host Driver, version 1.88.45.3 (r420671)
- [ 11.776527] Compiled in drivers/net/wireless/bcmdhd on Jun 23 2014 at 17:04:09
- [ 11.792659] [ap6xxx]: get power regulator failed.
- [ 11.798072] gpio ap6xxx_wl_regon set val 0, act val 0
- [ 11.903773] [ap6xxx]: sdio wifi power state: off
- [ 11.908948] =========== WLAN placed in RESET ========
- [ 11.927714] Bluetooth: MSM Sleep Mode Driver Ver 1.2
- [ 11.967366] usbcore: registered new interface driver asix
- [ 11.984956] usbcore: registered new interface driver qf9700
- [ 12.006918] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 12.033158] usbcore: registered new interface driver rtl8150
- [ 12.053503] usbcore: registered new interface driver cdc_ether
- [ 12.085379] eth0: Use random mac address
- [ 12.186073] 0xf6000008 = 0x8104361c, line:322, freq:22579200
- [ 12.195991] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
- [ 12.205418] init: powerctl: cannot expand '${sys.powerctl}'
- [ 12.212071] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
- [ 12.226224] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
- [ 12.231127] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- [ 12.247592] android_usb: already disabled
- [ 12.252289] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
- [ 12.263403] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
- [ 12.265901] adb_open
- [ 12.266525] mtp_bind_config
- [ 12.266538] ep_matches, wrn: endpoint already claimed, ep(0xe609f740, 0xe6134000, ep1out)
- [ 12.266545] ep_matches, wrn: endpoint already claimed, ep(0xe609f6c0, 0xe6134000, ep1in)
- [ 12.266584] adb_bind_config
- [ 12.266589] ep_matches, wrn: endpoint already claimed, ep(0xe609f740, 0xe6134000, ep1out)
- [ 12.266595] ep_matches, wrn: endpoint already claimed, ep(0xe609f6c0, 0xe6134000, ep1in)
- [ 12.266602] ep_matches, wrn: endpoint already claimed, ep(0xe609f5c0, 0xe6134000, ep2in)
- [ 12.266608] ep_matches, wrn: endpoint already claimed, ep(0xe609f740, 0xe6134000, ep1out)
- [ 12.266614] ep_matches, wrn: endpoint already claimed, ep(0xe609f6c0, 0xe6134000, ep1in)
- shell@kylin-optimus:/ $ [ 12.968225] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 16.649587] rtc_settime(239): time to set 1970-1-2 0:0:0
- [ 16.685853] rtc_settime(283): set time 1970-1-2 0:0:0 success!
- [ 16.692731] rtc_gettime(323): read time 1970-1-2 0:0:0
- [ 19.705388] healthd: battery l=100 v=0 t=30.0 h=2 st=5 c=0 chg=a
- [ 19.714717] request_suspend_state: wakeup (3->0) at 19687612509 (1970-01-02 00:00:03.065149168 UTC)
- [ 19.832315] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
- [ 19.840334] lowmemorykiller: oom_adj 0 => oom_score_adj 0
- [ 19.846377] lowmemorykiller: oom_adj 1 => oom_score_adj 58
- [ 19.852527] lowmemorykiller: oom_adj 2 => oom_score_adj 117
- [ 19.858773] lowmemorykiller: oom_adj 3 => oom_score_adj 176
- [ 19.865008] lowmemorykiller: oom_adj 9 => oom_score_adj 529
- [ 19.871270] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
- [ 20.130835] gmac0: probed
- [ 20.133852] gmac0 gmac0: eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (gmac0-0:00)
- [ 20.282309] acc_open
- [ 20.288431] acc_release
- [ 20.463262] warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
- [ 20.836096] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm40183b2_ag.bin
- [ 20.846243]
- [ 20.846246] Dongle Host Driver, version 1.88.45.3 (r420671)
- [ 20.846249] Compiled in drivers/net/wireless/bcmdhd on Jun 23 2014 at 17:04:09
- [ 20.862228] wl_android_wifi_on in 1
- [ 20.866128] wl_android_wifi_on in 2: g_wifi_on=0
- [ 20.871335] [ap6xxx]: get power regulator failed.
- [ 20.876692] gpio ap6xxx_wl_regon set val 1, act val 1
- [ 20.982670] [ap6xxx]: sdio wifi power state: on
- [ 20.987968] =========== WLAN going back to live ========
- [ 20.994004] sdio_reset_comm():
- [ 20.997432] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.009863] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.021250] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.087053] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.123307] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 21.132097] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 21.140513] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 21.150515] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 21.220776] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.231126] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.297452] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 21.308581]
- [ 21.308585]
- [ 21.308587] dhd_bus_devreset: == WLAN ON ==
- [ 21.316681] dhd_bus_devreset called when dongle is not in reset
- [ 21.324000] Will call dhd_bus_start instead
- [ 21.329106] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm40183b2_ag.bin
- [ 21.339822] dhd_conf_download_config: Ignore config file /system/vendor/modules/config.txt
- [ 21.349286] Final fw_path=/system/vendor/modules/fw_bcm40183b2_ag.bin
- [ 21.356722] Final nv_path=/system/vendor/modules/nvram_ap6330.txt
- [ 21.363584] Final conf_path=/system/vendor/modules/config.txt
- [ 21.445302] NVRAM version: AP6330_NVRAM_V1.0_20121130
- [ 21.452125] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 21.637020] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 21.644312] bcmsdh_set_drvdata: Enter
- [ 21.648559] bcmsdh_register_oob_intr: Enter
- [ 21.653374] bcmsdh_register_oob_intr: IRQ=3 Type=414
- [ 21.659347]
- [ 21.659352] bcmdhd wakeup 0
- [ 21.666569] dhd_conf_set_band: Set band 0
- [ 21.674277] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=98:3b:16:b7:0c:f6
- [ 21.683821] dhd_conf_set_country: Set country ALL, revision 0
- [ 21.758946] Country code: ALL (ALL/0)
- [ 21.763721] dhd_conf_set_roam: Set roam_off 1
- [ 21.772480] dhd_preinit_ioctls buf_key_b4_m4 set failed -23
- [ 21.788201] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
- [ 21.798150] Driver: 1.88.45.3 (r420671)
- [ 21.798159] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
- [ 21.815225] wl_android_wifi_on: Success
- [ 21.821581] wl_cfg80211_attach_post: p2p0 p2p_dev_addr=9a:3b:16:b7:0c:f6
- [ 21.829881] dhd_rx_frame: net device is NOT registered yet. drop packet
- [ 23.586251] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
- [ 23.587064] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
- [ 23.637828] PVR_K:(Warn): 1749: DestroyHandleBase: Handles still exist (14 found) [0, ]
- [ 24.708996] [rfkill]: rfkill set power 1
- [ 24.727280] gpio ap6xxx_bt_regon set val 0, act val 0
- [ 24.969168] [rfkill]: rfkill set power 0
- [ 24.973595] gpio ap6xxx_bt_regon set val 1, act val 1
- [ 26.326082] [BT_LPM] bluesleep_get_uart_port: bluesleep_get_uart_port get uart_port from blusleep_uart_dev: uart, port irq: 34
- [ 27.351194] CPU7: shutdown
- [ 27.851330] CPU6: shutdown
- [ 29.353699] CPU5: shutdown
- [ 29.854679] CPU3: shutdown
- [ 30.343742] CPU2: shutdown
- [ 30.547136] eth0: no IPv6 routers present
- [ 30.853529] CPU4: shutdown
- [ 32.337230] p2p0: no IPv6 routers present
- [ 35.855127] CPU2: Booted secondary processor
- [ 36.347174] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
- [ 36.353893] [BT_LPM] bluesleep_tx_timer_expire: Tx data during last period
- [ 40.864856] CPU3: Booted secondary processor
- [ 41.376385] CPU4: Booted secondary processor
- [ 42.998966] [BT_LPM] bluesleep_hostwake_task: hostwake line change
- [ 44.849928] CPU3: shutdown
- [ 45.344384] CPU2: shutdown
- [ 45.855362] CPU4: shutdown
- [ 46.367198] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
- [ 46.373973] [BT_LPM] bluesleep_tx_timer_expire: Tx data during last period
- [ 56.387220] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
- [ 56.394035] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle
- [ 56.402288] [BT_LPM] bluesleep_sleep_work: going to sleep...
- [ 58.870769] CPU2: Booted secondary processor
- [ 61.857976] CPU3: Booted secondary processor
- [ 65.357274] CPU3: shutdown
- [ 66.356875] CPU2: shutdown
- [ 69.370385] CPU2: Booted secondary processor
- [ 69.857396] CPU3: Booted secondary processor
- [ 70.187565] healthd: battery l=100 v=0 t=30.0 h=2 st=5 c=0 chg=a
- [ 73.353416] CPU3: shutdown
- [ 73.852813] CPU2: shutdown
- [ 76.869561] CPU2: Booted secondary processor
- [ 80.359793] CPU2: shutdown
- [ 94.866195] CPU2: Booted secondary processor
- [ 95.365297] CPU3: Booted secondary processor
- [ 98.857746] CPU3: shutdown
- [ 99.354477] CPU2: shutdown
- [ 104.869219] CPU2: Booted secondary processor
- [ 108.354284] CPU2: shutdown
- [ 118.860642] CPU2: Booted secondary processor
- [ 120.854262] CPU2: shutdown
- [ 127.345593] CPU2: Booted secondary processor
- [ 128.865516] CPU3: Booted secondary processor
- [ 130.190060] healthd: battery l=100 v=0 t=30.0 h=2 st=5 c=0 chg=a
- [ 132.352723] CPU3: shutdown
- [ 132.854476] CPU2: shutdown
- \00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement