Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # /dev/cpu_dma_latency set to 0us
- log init done
- num component carrier 1
- WARNING: setting 'gtpu_log_level' not found in configuration file
- WARNING: setting 'gtpu_log_verbosity' not found in configuration file
- WARNING: setting 'udp_log_level' not found in configuration file
- WARNING: setting 'udp_log_verbosity' not found in configuration file
- WARNING: setting 'osa_log_level' not found in configuration file
- WARNING: setting 'osa_log_verbosity' not found in configuration file
- ----------------------------------------------------------------------
- ENB CONFIG FILE CONTENT LOADED (TBC):
- ----------------------------------------------------------------------
- ENB CONFIG for instance 0:
- eNB name: eNB_Eurecom_LTEBox:
- eNB ID: 3584:
- Cell type: CELL_MACRO_ENB:
- TAC: 1:
- MCC: 244:
- MNC: 09:
- node_function for CC 0: eNodeB_3GPP:
- node_timing for CC 0: synch_to_ext_device:
- node_synch_ref for CC 0: 0:
- eutra band for CC 0: 7:
- downlink freq for CC 0: 2685000000:
- uplink freq offset for CC 0: -120000000:
- Cell ID for CC 0: 0:
- N_RB_DL for CC 0: 50:
- nb_antenna_ports for CC 0: 1:
- nb_antennas_tx for CC 0: 1:
- nb_antennas_rx for CC 0: 1:
- rach_numberOfRA_Preambles for CC 0: 15:
- rach_preamblesGroupAConfig for CC 0: 0:
- rach_powerRampingStep for CC 0: 2:
- rach_preambleInitialReceivedTargetPower for CC 0: 8:
- rach_preambleTransMax for CC 0: 6:
- rach_raResponseWindowSize for CC 0: 7:
- rach_macContentionResolutionTimer for CC 0: 5:
- rach_maxHARQ_Msg3Tx for CC 0: 4:
- bcch_modificationPeriodCoeff for CC 0: 0:
- pcch_defaultPagingCycle for CC 0: 2:
- pcch_nB for CC 0: 2:
- prach_root for CC 0: 0:
- prach_config_index for CC 0: 0:
- prach_high_speed for CC 0: 0:
- prach_zero_correlation for CC 0: 1:
- prach_freq_offset for CC 0: 2:
- pdsch_referenceSignalPower for CC 0: -27:
- pdsch_p_b for CC 0: 0:
- pusch_n_SB for CC 0: 1:
- pusch_hoppingMode for CC 0: 0:
- pusch_hoppingOffset for CC 0: 0:
- pusch_enable64QAM for CC 0: 0:
- pusch_groupHoppingEnabled for CC 0: 1:
- pusch_groupAssignment for CC 0: 0:
- pusch_sequenceHoppingEnabled for CC 0: 0:
- pusch_nDMRS1 for CC 0: 1:
- pucch_delta_shift for CC 0: 0:
- pucch_nRB_CQI for CC 0: 1:
- pucch_nCS_AN for CC 0: 0:
- srs_enable for CC 0: 0:
- pusch_p0_Nominal for CC 0: -96:
- pucch_p0_Nominal for CC 0: -104:
- pusch_alpha for CC 0: 7:
- pucch_deltaF_Format1 for CC 0: 2:
- pucch_deltaF_Format1b for CC 0: 1:
- pucch_deltaF_Format2 for CC 0: 1:
- pucch_deltaF_Format2a for CC 0: 1:
- pucch_deltaF_Format2b for CC 0: 1:
- msg3_delta_Preamble for CC 0: 6:
- ul_CyclicPrefixLength for CC 0: 0:
- ue_TimersAndConstants_t300 for CC 0: 5:
- ue_TimersAndConstants_t301 for CC 0: 5:
- ue_TimersAndConstants_t310 for CC 0: 5:
- ue_TimersAndConstants_n310 for CC 0: 7:
- ue_TimersAndConstants_t311 for CC 0: 3:
- ue_TimersAndConstants_n311 for CC 0: 0:
- ue_TransmissionMode for CC 0: 0:
- Global log level: info
- HW log level: info
- PHY log level: info
- MAC log level: info
- RLC log level: info
- PDCP log level: info
- RRC log level: info
- UDP log level: info
- GTP log level: info
- OSA log level: info
- --------------------------------------------------------
- Downlink frequency/ uplink offset of CC_id 0 set to 2685000000/-120000000
- configuring for eNB
- CPU Freq is 3.392339
- [NETLINK] Error opening socket -1 (93:Protocol not supported)
- [NETLINK]Opened socket with fd -1
- [NETLINK] Error fcntl (9:Bad file descriptor)
- reported resolution = 1 ns
- [HW][I]Version: Branch: HEAD Abrev. Hash: 08b8b3142 Date: Mon Jun 26 10:12:41 2017 +0200
- [PHY][I]Initializing frame parms for N_RB_DL 50, Ncp 0, osf 1
- lte_parms.c: Setting N_RB_DL to 50, ofdm_symbol_size 1024
- [PHY][I][eNB 0] Initializing DL_FRAME_PARMS : N_RB_DL 50, PHICH Resource 1, PHICH Duration 0
- [openair][LTE_PHY][INIT] common_vars->txdataF[0][0] = 0x7fb7859c1040 (573440 bytes)
- [openair][LTE_PHY][INIT] common_vars->txdataF[0][5] = 0x7fb785934040 (573440 bytes)
- [openair][LTE_PHY][INIT] common_vars->txdata[0][0] = 0x7fb78589d040 (614400 bytes)
- [openair][LTE_PHY][INIT] common_vars->rxdata[0][0] = 0x7fb785806040 (614400 bytes)
- [openair][LTE_PHY][INIT] common_vars->rxdata_7_5kHz[0][0] = 0x7fb78927b040 (122880 bytes)
- [openair][LTE_PHY][INIT] prach_vars->rxsigF[0] = 0x55940502d800
- [openair][LTE_PHY][INIT] prach_vars->prach_ifft[0] = 0x559405039860
- [PHY][I]init eNB: Node Function 0
- [PHY][I]init eNB: Nid_cell 0
- [PHY][I]init eNB: frame_type 0,tdd_config 3
- [PHY][I]init eNB: number of ue max 16 number of enb max 1 number of harq pid max 8
- [PHY][I]init eNB: N_RB_DL 50
- [PHY][I]init eNB: prach_config_index 0
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 0
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 0
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 1
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 1
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 2
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 2
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 3
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 3
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 4
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 4
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 5
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 5
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 6
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 6
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 7
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 7
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 8
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 8
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 9
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 9
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 10
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 10
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 11
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 11
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 12
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 12
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 13
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 13
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 14
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 14
- [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 15
- [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 15
- CPU Freq is 3.392337
- frame_parms->N_RB_DL=50
- frame_parms->N_RB_UL=50
- frame_parms->Nid_cell=0
- frame_parms->Ncp=0
- frame_parms->Ncp_UL=0
- frame_parms->nushift=0
- frame_parms->frame_type=0
- frame_parms->tdd_config=3
- frame_parms->tdd_config_S=0
- frame_parms->mode1_flag=1
- frame_parms->nb_antenna_ports_eNB=1
- frame_parms->nb_antennas_tx=1
- frame_parms->nb_antennas_rx=1
- frame_parms->ofdm_symbol_size=1024
- frame_parms->nb_prefix_samples=72
- frame_parms->nb_prefix_samples0=80
- frame_parms->first_carrier_offset=724
- frame_parms->samples_per_tti=15360
- frame_parms->symbols_per_tti=14
- HW: Configuring card 0, nb_antennas_tx/rx 1/1
- Card 0, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 0, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 0, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 0, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 1, nb_antennas_tx/rx 1/1
- Card 1, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 1, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 1, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 1, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 2, nb_antennas_tx/rx 1/1
- Card 2, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 2, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 2, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 2, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 3, nb_antennas_tx/rx 1/1
- Card 3, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 3, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 3, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 3, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 4, nb_antennas_tx/rx 1/1
- Card 4, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 4, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 4, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 4, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 5, nb_antennas_tx/rx 1/1
- Card 5, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 5, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 5, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 5, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 6, nb_antennas_tx/rx 1/1
- Card 6, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 6, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 6, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 6, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- HW: Configuring card 7, nb_antennas_tx/rx 1/1
- Card 7, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
- Card 7, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 7, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- Card 7, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
- [HW][I]CPU Affinity of main() function is... CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
- [PHY][I]Intializing L2
- [MAC][I][l2_init] [MAIN] MAC_INIT_GLOBAL_PARAM IN...
- [MAC][I][mac_init_global_param] [MAIN] CALLING RLC_MODULE_INIT...
- [MAC][I][mac_init_global_param] [MAIN] RLC_MODULE_INIT OK, malloc16 for mac_rlc_xface...
- [MAC][I][mac_init_global_param] [MAIN] malloc16 OK, mac_rlc_xface @ 0x559408985400
- [MAC][I][mac_init_global_param] [MAIN] RLC interface setup and init
- [PDCP][I]PDCP layer has been initialized
- [MAC][I][mac_init_global_param] [MAIN] Init Global Param Done
- [MAC][I][l2_init] [MAIN] init eNB MAC functions
- [MAC][I][l2_init] [MAIN] init UE MAC functions
- [MAC][I][l2_init] [MAIN] PHY Frame configuration
- [MAC][I][mac_top_init] [MAIN] Init function start:Nb_UE_INST=0
- [MAC][I][mac_top_init] [MAIN] Init function start:Nb_eNB_INST=1
- [MAC][I][mac_top_init] [MAIN] calling RRC
- [RRC][I][eNB] handover active state is 0
- [RRC][I][eNB] eMBMS active state is 0
- [MAC][I][mac_top_init] [MAIN][INIT] Init function finished
- [SCTP][I][sctp_eNB_task] Starting SCTP layer
- [S1AP][I][s1ap_eNB_task] Starting S1AP layer
- [UDP][I]Initializing UDP task interface
- [UDP][I]Initializing UDP task interface: DONE
- [GTPV1U][I]Initializing GTPU stack 0x5593efa1d800
- ITTI tasks created
- Wait for the ITTI initialize message
- [UDP][I]Initializing UDP for local address 127.0.0.10 with port 2152
- [UDP][I]Inserting new descriptor for task 11, sd 40
- [UDP][I]Initializing UDP for local address 127.0.0.10 with port 2152: DONE
- [ENB_APP][I][eNB_app_register] [eNB 0] eNB_app_register for instance 0
- [RRC][I][eNB 0] Received RRC_CONFIGURATION_REQ
- [S1AP][I][s1ap_eNB_handle_register_eNB] Registered new eNB[0] and macro eNB id 3584
- [S1AP][I][s1ap_eNB_register_mme] [eNB 0] check the mme registration state
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Init...
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Checking release
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Rel14 RRC detected, MBMS flag 0
- [RRC][I][eNB 0] Configuration SIB2/3, MBMS = 0
- [MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY
- [MAC][I][rrc_mac_config_req] [CONFIG]SIB2/3 Contents (partial)
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.n_SB = 1
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.hoppingMode = 0
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.pusch_HoppingOffset = 0
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.enable64QAM = 0
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.groupHoppingEnabled = 1
- [SCTP][I][sctp_handle_new_association_req] Converted ipv4 address 127.0.0.20 to network type
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.groupAssignmentPUSCH = 0
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.sequenceHoppingEnabled = 0
- [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.cyclicShift = 1
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] OPENAIR RRC IN....
- [SCTP][I][sctp_handle_new_association_req] connectx assoc_id 15 in progress..., used 1 addresses
- [SCTP][I][sctp_handle_new_association_req] Inserted new descriptor for sd 41 in list, nb elements 1, assoc_id 15
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32769
- [SCTP][I][sctp_eNB_read_from_socket] Client association changed: 0
- [SCTP][I][sctp_get_peeraddresses] ----------------------
- [SCTP][I][sctp_get_peeraddresses] Peer addresses:
- [SCTP][I][sctp_get_peeraddresses] - [127.0.0.20]
- [SCTP][I][sctp_get_peeraddresses] ----------------------
- [SCTP][I][sctp_get_sockinfo] ----------------------
- [SCTP][I][sctp_get_sockinfo] SCTP Status:
- [SCTP][I][sctp_get_sockinfo] assoc id .....: 15
- [SCTP][I][sctp_get_sockinfo] state ........: 4
- [SCTP][I][sctp_get_sockinfo] instrms ......: 2
- [SCTP][I][sctp_get_sockinfo] outstrms .....: 2
- [SCTP][I][sctp_get_sockinfo] fragmentation : 65484
- [SCTP][I][sctp_get_sockinfo] pending data .: 0
- [SCTP][I][sctp_get_sockinfo] unack data ...: 0
- [SCTP][I][sctp_get_sockinfo] rwnd .........: 106496
- [SCTP][I][sctp_get_sockinfo] peer info :
- [SCTP][I][sctp_get_sockinfo] state ....: 2
- [SCTP][I][sctp_get_sockinfo] cwnd .....: 131064
- [SCTP][I][sctp_get_sockinfo] srtt .....: 0
- [SCTP][I][sctp_get_sockinfo] rto ......: 3000
- [SCTP][I][sctp_get_sockinfo] mtu ......: 65532
- [SCTP][I][sctp_get_sockinfo] ----------------------
- [SCTP][I][sctp_eNB_read_from_socket] Comm up notified for sd 41, assigned assoc_id 15
- [S1AP][I][s1ap_eNB_generate_s1_setup_request] 3584 -> 00e000
- [SCTP][I][sctp_send_data] Successfully sent 59 bytes on stream 0 for assoc_id 15
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 27 received from port 36412, on stream 0, PPID 18
- [S1AP][I][s1ap_decode_s1ap_s1setupresponseies] Decoding message S1ap_S1SetupResponseIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3535)
- [S1AP][I][s1ap_eNB_handle_s1_setup_response] servedGUMMEIs.list.count 1
- [S1AP][I][s1ap_eNB_handle_s1_setup_response] servedPLMNs.list.count 1
- [ENB_APP][I][eNB_app_task] [eNB 0] Received S1AP_REGISTER_ENB_CNF: associated MME 1
- Initializing eNB threads
- [PHY][I]Initializing eNB 0 CC_id 0 : (eNodeB_3GPP,synch_to_ext_device)
- linux; GNU C++ version 6.3.0 20170406; Boost_106200; UHD_003.010.002.000-0-ge75c7d6f
- [PHY][I]Checking for USRPs : UHD 003.010.002.000-0-ge75c7d6f (3.10.2)
- [PHY][I]Found USRP B200
- -- Detected Device: B210
- -- Operating over USB 3.
- -- Initialize CODEC control...
- -- Initialize Radio control...
- -- Performing register loopback test... pass
- -- Performing register loopback test... pass
- -- Performing CODEC loopback test... pass
- -- Performing CODEC loopback test... pass
- -- Setting master clock rate selection to 'automatic'.
- -- Asking for clock rate 16.000000 MHz...
- -- Actually got clock rate 16.000000 MHz.
- -- Performing timer loopback test... pass
- -- Performing timer loopback test... pass
- -- Setting master clock rate selection to 'manual'.
- -- Asking for clock rate 30.720000 MHz...
- -- Actually got clock rate 30.720000 MHz.
- -- Performing timer loopback test... pass
- -- Performing timer loopback test... pass
- [PHY][I]cal 0: freq 3500000000.000000, offset 44.000000, diff 935000000.000000
- [PHY][I]cal 1: freq 2660000000.000000, offset 49.800000, diff 95000000.000000
- [PHY][I]cal 2: freq 2300000000.000000, offset 51.000000, diff 265000000.000000
- [PHY][I]cal 3: freq 1880000000.000000, offset 53.000000, diff 685000000.000000
- [PHY][I]cal 4: freq 816000000.000000, offset 57.000000, diff 1749000000.000000
- [PHY][I]RX Gain 0 120.000000 (52.800000) => 67.200000 (max 76.000000)
- [PHY][I]Actual master clock: 30.720000MHz...
- [PHY][I]RF board max packet size 3836, size for 100µs jitter 1536
- [PHY][I]rx_max_num_samps 1536
- [PHY][I]RX Channel 0
- [PHY][I] Actual RX sample rate: 15.360000MSps...
- [PHY][I] Actual RX frequency: 2.565000GHz...
- [PHY][I] Actual RX gain: 67.000000...
- [PHY][I] Actual RX bandwidth: 20.000000M...
- [PHY][I] Actual RX antenna: RX2...
- [PHY][I]TX Channel 0
- [PHY][I] Actual TX sample rate: 15.360000MSps...
- [PHY][I] Actual TX frequency: 2.685000GHz...
- [PHY][I] Actual TX gain: 89.750000...
- [PHY][I] Actual TX bandwidth: 20.000000M...
- [PHY][I] Actual TX antenna: TX/RX...
- [PHY][I]Device timestamp: 0.000259...
- [RRH] has loaded USRP B200 device.
- setup_eNB_buffers: frame_parms = 0x7fb785a4e788
- [PHY][I]Initializing eNB 0 CC_id 0 (eNodeB_3GPP,synch_to_ext_device),
- [HW][I][SCHED][eNB] eNB_thread_single started on CPU 4 TID 1701, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
- waiting for sync (eNB_thread_single)
- Creating te_thread
- [PHY][I]thread te created id=1704[HW][I][SCHED][eNB] eNB_thread_prach started on CPU 1 TID 1705, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
- [HW][I][SCHED][eNB] eNB_thread_synch started on CPU 1 TID 1706, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
- waiting for sync (eNB_thread_synch)
- Setting eNB buffer to all-RX
- Sending sync to all threads
- TYPE <CTRL-C> TO TERMINATE
- Entering ITTI signals handler
- got sync (eNB_thread_single)
- got sync (eNB_thread_synch)
- [PHY][I][eNB 0][RAPROC] Frame 401 Terminating ra_proc for harq 0, UE 0
- [MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 401, Received CCCH: 50.98.54.b8.99.96, Terminating RA procedure for UE rnti a52b
- [MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 401 CCCH: Received Msg3: length 6, offset 5
- MAC: new UE id 0 rnti a52b
- [MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 401 Added user with rnti a52b => UE 0
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Received RRC_MAC_CCCH_DATA_IND
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 0, UE 0: not configured, skipping UE scheduling
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Accept new connection from UE random UE identity (0x99894b8509000000) MME code 0 TMSI 0 cause 3
- [MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY for UE 0 (a52b)
- [PHY][I]phy_config_dedicated_eNB: physicalConfigDedicated=0x7fb748003290
- [PHY][I]Transmission Mode (phy_config_dedicated_eNB) 1
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] [RAPROC] Logical Channel DL-CCCH, Generating RRCConnectionSetup (bytes 25)
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b]CALLING RLC CONFIG SRB1 (rbid 1)
- [PDCP][N][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB 01] Action ADD LCID 1 (SRB id 1) configured with SN size 5 bits and RLC AM
- [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] [SRB 1] rrc_rlc_add_rlc SRB
- [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01][CONFIGURE] max_retx_threshold 4 poll_pdu 4 poll_byte 65535 t_poll_retransmit 80 t_reordering 35 t_status_prohibit 0
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 1, UE 0: not configured, skipping UE scheduling
- [PHY][I][eNB 0] Sent physicalConfigDedicated=0x7fb748003290 for UE 0
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 2, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 3, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 4, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 402, subframeP 5: Generating Msg4 with RRC Piggyback (RA proc 0, RNTI a52b)
- [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 402 subframeP 5 Msg4 : TBS 41, sdu_len 25, msg4_header 8, msg4_padding 0, msg4_post_padding 7
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 5, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 6, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 7, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 8, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 9, UE 0: not configured, skipping UE scheduling
- [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 403, subframeP 0: Checking if Msg4 was acknowledged:
- MAC: msg4 acknowledged for rnti a52b fsf 403/0, let's configure it
- [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 403, subframeP 0 : Msg4 acknowledged
- [MAC][I][schedule_ulsch_rnti] [eNB 0][PUSCH 2/a52b] CC_id 0 Frame 403 subframeP 0 Scheduled UE 0 (mcs 10, first rb 1, nb_rb 6, rb_table_index 5, TBS 129, harq_pid 2)
- [MAC][I][rx_sdu] [eNB 0] CC_id 0 MAC CE_LCID 29 : ul_total_buffer = 0 (lcg increment 0)
- [RRC][N][eNB 0] Frame 403: received a DCCH 1 message on SRB 1 with Size 71 from UE a52b
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Received on DCCH 1 RRC_DCCH_DATA_IND
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] [RAPROC] Logical Channel UL-DCCH, processing RRCConnectionSetupComplete from UE (SRB1 Active)
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] UE State = RRC_CONNECTED
- [S1AP][I][s1ap_eNB_handle_nas_first_req] Found usable eNB_ue_s1ap_id: 0x06692d 420141(10)
- [SCTP][I][sctp_send_data] Successfully sent 115 bytes on stream 1 for assoc_id 15
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 62 received from port 36412, on stream 1, PPID 18
- [S1AP][I][s1ap_decode_s1ap_downlinknastransporties] Decoding message S1ap_DownlinkNASTransportIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3150)
- [RRC][I][eNB 0] Received S1AP_DOWNLINK_NAS: ue_initial_id 1, eNB_ue_s1ap_id 420141
- [PDCP][I][FRAME 00000][eNB][MOD 00][RNTI a52b]Received RRC_DCCH_DATA_REQ from TASK_RRC_ENB: instance 0, rb_id 1, muiP 0, confirmP 0, mode 1
- [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01] RLC_AM_DATA_REQ size 44 Bytes, NB SDU 1 current_sdu_index=0 next_sdu_index=1 conf 0 mui 0 vtA 0 vtS 0
- [RRC][N][eNB 0] Frame 409: received a DCCH 1 message on SRB 1 with Size 6 from UE a52b
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Received on DCCH 1 RRC_DCCH_DATA_IND
- [SCTP][I][sctp_send_data] Successfully sent 51 bytes on stream 1 for assoc_id 15
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 28 received from port 36412, on stream 1, PPID 18
- [S1AP][I][s1ap_decode_s1ap_downlinknastransporties] Decoding message S1ap_DownlinkNASTransportIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3150)
- [RRC][I][eNB 0] Received S1AP_DOWNLINK_NAS: ue_initial_id 1, eNB_ue_s1ap_id 420141
- [PDCP][I][FRAME 00000][eNB][MOD 00][RNTI a52b]Received RRC_DCCH_DATA_REQ from TASK_RRC_ENB: instance 0, rb_id 1, muiP 0, confirmP 0, mode 1
- [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01] RLC_AM_DATA_REQ size 10 Bytes, NB SDU 2 current_sdu_index=1 next_sdu_index=2 conf 0 mui 0 vtA 1 vtS 1
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 22 received from port 36412, on stream 1, PPID 18
- [S1AP][I][s1ap_decode_s1ap_uecontextreleasecommandies] Decoding message S1ap_UEContextReleaseCommandIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:5937)
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Logical Channel DL-DCCH, Generate RRCConnectionRelease (bytes 3)
- [RRC][W]S1AP removed entry in hashtable s1ap_id2_s1ap_ids for eNB_ue_s1ap_id 420141
- [RRC][W]S1AP removed entry in hashtable initial_id2_s1ap_ids for ue_initial_id 1
- [S1AP][W][s1ap_ue_context_release_complete] Removed UE context eNB_ue_s1ap_id 420141
- [SCTP][I][sctp_send_data] Successfully sent 21 bytes on stream 1 for assoc_id 15
- [PDCP][I][FRAME 00000][eNB][MOD 00][RNTI a52b]Received RRC_DCCH_DATA_REQ from TASK_RRC_ENB: instance 0, rb_id 1, muiP 0, confirmP 0, mode 1
- [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01] RLC_AM_DATA_REQ size 8 Bytes, NB SDU 3 current_sdu_index=2 next_sdu_index=3 conf 0 mui 0 vtA 1 vtS 2
- [RRC][I]Removing UE a52b instance
- [RRC][W][eNB 0] Removing UE RNTI a52b
- MAC: remove UE 0 rnti a52b
- [MAC][I][rrc_mac_remove_ue] Removing UE 0 from Primary CC_id 0 (rnti a52b)
- [S1AP][W][s1ap_ue_context_release_req] Failed to find ue context associated with eNB ue s1ap id: 420141
- [S1AP][E][s1ap_eNB_task] Failed to find ue context associated with eNB ue s1ap id: 420141
- [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Removed UE context
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
- [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
- [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32773
Add Comment
Please, Sign In to add comment