Network problem: RC slow interactive boot (success)

rc boot logging started at Fri Oct 19 04:57:54 2018


 * About to start the service modules
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/modules start
 * Loading module vboxnetflt ...
 [ ok ]
 * Loading module vboxnetadp ...
 [ ok ]
 * Loading module vboxdrv ...
 [ ok ]
 * Loading module vboxpci ...
 [ ok ]

 * About to start the service hwclock
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/hwclock start
 * Setting system clock using the hardware clock [Local Time] ...
 [ ok ]

 * About to start the service procfs
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/procfs start
 * Mounting misc binary format filesystem ...
 [ ok ]

 * About to start the service binfmt
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/binfmt start
 * Loading custom binary format handlers ...
 [ ok ]

 * About to start the service fsck
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/fsck start
 * Checking local filesystems  ...
/dev/sdb4: clean, 1515534/15073280 files, 40093518/60284928 blocks
/dev/sdb2: clean, 577/32768 files, 8617/131072 blocks
 [ ok ]

 * About to start the service root
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/root start
 * Remounting root filesystem read/write ...
 [ ok ]
 * Remounting filesystems ...
 [ ok ]

 * About to start the service mtab
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/mtab start
 * Updating /etc/mtab ...
 * Creating mtab symbolic link
 [ ok ]

 * About to start the service swap
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/swap start
 * Activating swap devices ...
 [ ok ]

 * About to start the service localmount
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/localmount start
 * Mounting local filesystems ...
 [ ok ]

 * About to start the service sysctl
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/sysctl start
 * Configuring kernel parameters ...
* Applying /etc/sysctl.d/30-idea-inotify-watches.conf ...
fs.inotify.max_user_watches = 524288
* Applying /etc/sysctl.conf ...
net.ipv4.ip_forward = 0
 [ ok ]

 * About to start the service bootmisc
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/bootmisc start
 * Creating user login records ...
 [ ok ]

 * About to start the service termencoding
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/termencoding start
 * Setting terminal encoding [UTF-8] ...
 [ ok ]

 * About to start the service consolefont
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/consolefont start
 * Setting console font [ter-v14n] ...
 [ ok ]

 * About to start the service hostname
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/hostname start
 * Setting hostname to digreamon-pc  ...
 [ ok ]

 * About to start the service keymaps
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/keymaps start
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [ua-utf-ws] ...
 [ ok ]

 * About to start the service loopback
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/loopback start
 * Bringing up network interface lo ...
 [ ok ]

 * About to start the service opentmpfiles-setup
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/opentmpfiles-setup start
 * Setting up tmpfiles.d entries ...
 [ ok ]

 * About to start the service urandom
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/urandom start
 * Initializing random number generator ...
 [ ok ]

rc boot logging stopped at Fri Oct 19 01:58:13 2018


rc default logging started at Fri Oct 19 01:58:13 2018


 * About to start the service syslog-ng
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/syslog-ng start
 * Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ...
 [ ok ]
 * Starting syslog-ng ...
 * start-stop-daemon: fopen `/run/syslog-ng.pid': No such file or directory
 * Detaching to start `/usr/sbin/syslog-ng' ...
 *   Sending signal 0 to PID 3064 ...
 [ ok ]
 [ ok ]

 * About to start the service acpid
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/acpid start
 * Starting acpid ...
 * Detaching to start `/usr/sbin/acpid' ...
 *   Sending signal 0 to PID 3095 ...
 [ ok ]
 [ ok ]

 * About to start the service dbus
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/dbus start
 * Starting dbus ...
 * start-stop-daemon: fopen `/var/run/dbus.pid': No such file or directory
 * Detaching to start `/usr/bin/dbus-daemon' ...
 *   Sending signal 0 to PID 3125 ...
 [ ok ]
 [ ok ]

 * About to start the service consolekit
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/consolekit start
 * Starting consolekit ...
 * start-stop-daemon: fopen `/run/ConsoleKit/pid': No such file or directory
 * Detaching to start `/usr/sbin/console-kit-daemon' ...
 *   Sending signal 0 to PID 3155 ...
 [ ok ]
 [ ok ]

 * About to start the service dcron
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * /etc/init.d/dcron uses runscript, please convert to openrc-run.
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/dcron start
 * Starting dcron ...
 [ ok ]

 * About to start the service lm_sensors
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/lm_sensors start
 * Initializing sensors ...
 [ ok ]

 * About to start the service net.enp3s0
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/net.enp3s0 start
 * Bringing up interface enp3s0
 *   Caching network module dependencies
need dbus
 *   Skipping module adsl due to missing program: /usr/sbin/adsl-start /usr/sbin/pppoe-start
 *   Skipping module br2684ctl due to missing program: br2684ctl
 *   Skipping module clip due to missing program: /usr/sbin/atmsigd
 *   Skipping module netplugd due to missing program: /sbin/netplugd
 *   Skipping module ifplugd due to missing program: /usr/sbin/ifplugd
 *   Skipping module ipppd due to missing program: /usr/sbin/ipppd
 *   Skipping module iwconfig due to missing program: /sbin/iwconfig
 *   Skipping module firewalld due to missing program: firewall-cmd
 *   Skipping module pump due to missing program: /sbin/pump
 *   Skipping module dhcpcd due to missing program: dhcpcd
 *   Loaded modules: apipa arping bonding l2tp tuntap bridge ccwgroup ethtool dummy hsr macvlan macchanger macnet wpa_supplicant ssidnet iproute2 pppd system vlan udhcpc ip6rd ip6to4
 *   ip link set dev enp3s0 up
 *   Configuring enp3s0 for MAC address AC:22:0B:50:F4:40 ...
 [ ok ]
 *   192.168.1.2/24 ...
 *     ip addr add 192.168.1.2/24 broadcast + dev enp3s0
 [ ok ]
 *   Adding routes
 *     default gw 192.168.1.1 ...
 *     ip route append default via 192.168.1.1 metric 2 dev enp3s0
 [ ok ]
 [ ok ]
 *   ip -4 route flush table cache dev enp3s0
 *   ip -6 route flush table cache dev enp3s0

 * About to start the service ntpd
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/ntpd start
 * Starting OpenNTPD ...
 * start-stop-daemon: fopen `/run/ntpd.pid': No such file or directory
 * Detaching to start `/usr/sbin/ntpd' ...
 *   Sending signal 0 to PID 3517 ...
 [ ok ]
 [ ok ]

 * About to start the service samba
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/samba start
 * samba -> start: smbd ...
 [ ok ]
 * samba -> start: nmbd ...
 [ ok ]

 * About to start the service unifi
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/unifi start
 * Starting UniFi Controller ...
 * start-stop-daemon: fopen `/run/unifi.pid': No such file or directory
 * Detaching to start `/etc/java-config-2/current-system-vm/bin/java' ...
 [ ok ]

 * About to start the service xdm-setup
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/xdm-setup start

 * About to start the service xdm
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/xdm start
 * Setting up sddm ...
 * start-stop-daemon: fopen `/run/sddm.pid': No such file or directory
 * Detaching to start `/usr/bin/sddm' ...
 [ ok ]

 * About to start the service local
 *   1) Start the service2) Skip the service
 *   3) Continue boot process4) Exit to shell
 * Executing: /lib/rc/sh/openrc-run.sh /lib/rc/sh/openrc-run.sh /etc/init.d/local start
 * Starting local ...
 [ ok ]

rc default logging stopped at Fri Oct 19 01:58:41 2018