Advertisement
Guest User

Untitled

a guest
May 12th, 2018
137
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
PHP 26.65 KB | None | 0 0
  1. <?php
  2.  
  3. /**
  4.  * @file
  5.  * Drupal site-specific configuration file.
  6.  *
  7.  * IMPORTANT NOTE:
  8.  * This file may have been set to read-only by the Drupal installation program.
  9.  * If you make changes to this file, be sure to protect it again after making
  10.  * your modifications. Failure to remove write permissions to this file is a
  11.  * security risk.
  12.  *
  13.  * The configuration file to be loaded is based upon the rules below. However
  14.  * if the multisite aliasing file named sites/sites.php is present, it will be
  15.  * loaded, and the aliases in the array $sites will override the default
  16.  * directory rules below. See sites/example.sites.php for more information about
  17.  * aliases.
  18.  *
  19.  * The configuration directory will be discovered by stripping the website's
  20.  * hostname from left to right and pathname from right to left. The first
  21.  * configuration file found will be used and any others will be ignored. If no
  22.  * other configuration file is found then the default configuration file at
  23.  * 'sites/default' will be used.
  24.  *
  25.  * For example, for a fictitious site installed at
  26.  * http://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
  27.  * for in the following directories:
  28.  *
  29.  * - sites/8080.www.drupal.org.mysite.test
  30.  * - sites/www.drupal.org.mysite.test
  31.  * - sites/drupal.org.mysite.test
  32.  * - sites/org.mysite.test
  33.  *
  34.  * - sites/8080.www.drupal.org.mysite
  35.  * - sites/www.drupal.org.mysite
  36.  * - sites/drupal.org.mysite
  37.  * - sites/org.mysite
  38.  *
  39.  * - sites/8080.www.drupal.org
  40.  * - sites/www.drupal.org
  41.  * - sites/drupal.org
  42.  * - sites/org
  43.  *
  44.  * - sites/default
  45.  *
  46.  * Note that if you are installing on a non-standard port number, prefix the
  47.  * hostname with that number. For example,
  48.  * http://www.drupal.org:8080/mysite/test/ could be loaded from
  49.  * sites/8080.www.drupal.org.mysite.test/.
  50.  *
  51.  * @see example.sites.php
  52.  * @see conf_path()
  53.  */
  54.  
  55. /**
  56.  * Database settings:
  57.  *
  58.  * The $databases array specifies the database connection or
  59.  * connections that Drupal may use.  Drupal is able to connect
  60.  * to multiple databases, including multiple types of databases,
  61.  * during the same request.
  62.  *
  63.  * Each database connection is specified as an array of settings,
  64.  * similar to the following:
  65.  * @code
  66.  * array(
  67.  *   'driver' => 'mysql',
  68.  *   'database' => 'databasename',
  69.  *   'username' => 'username',
  70.  *   'password' => 'password',
  71.  *   'host' => 'localhost',
  72.  *   'port' => 3306,
  73.  *   'prefix' => 'myprefix_',
  74.  *   'collation' => 'utf8_general_ci',
  75.  * );
  76.  * @endcode
  77.  *
  78.  * The "driver" property indicates what Drupal database driver the
  79.  * connection should use.  This is usually the same as the name of the
  80.  * database type, such as mysql or sqlite, but not always.  The other
  81.  * properties will vary depending on the driver.  For SQLite, you must
  82.  * specify a database file name in a directory that is writable by the
  83.  * webserver.  For most other drivers, you must specify a
  84.  * username, password, host, and database name.
  85.  *
  86.  * Transaction support is enabled by default for all drivers that support it,
  87.  * including MySQL. To explicitly disable it, set the 'transactions' key to
  88.  * FALSE.
  89.  * Note that some configurations of MySQL, such as the MyISAM engine, don't
  90.  * support it and will proceed silently even if enabled. If you experience
  91.  * transaction related crashes with such configuration, set the 'transactions'
  92.  * key to FALSE.
  93.  *
  94.  * For each database, you may optionally specify multiple "target" databases.
  95.  * A target database allows Drupal to try to send certain queries to a
  96.  * different database if it can but fall back to the default connection if not.
  97.  * That is useful for master/slave replication, as Drupal may try to connect
  98.  * to a slave server when appropriate and if one is not available will simply
  99.  * fall back to the single master server.
  100.  *
  101.  * The general format for the $databases array is as follows:
  102.  * @code
  103.  * $databases['default']['default'] = $info_array;
  104.  * $databases['default']['slave'][] = $info_array;
  105.  * $databases['default']['slave'][] = $info_array;
  106.  * $databases['extra']['default'] = $info_array;
  107.  * @endcode
  108.  *
  109.  * In the above example, $info_array is an array of settings described above.
  110.  * The first line sets a "default" database that has one master database
  111.  * (the second level default).  The second and third lines create an array
  112.  * of potential slave databases.  Drupal will select one at random for a given
  113.  * request as needed.  The fourth line creates a new database with a name of
  114.  * "extra".
  115.  *
  116.  * For a single database configuration, the following is sufficient:
  117.  * @code
  118.  * $databases['default']['default'] = array(
  119.  *   'driver' => 'mysql',
  120.  *   'database' => 'databasename',
  121.  *   'username' => 'username',
  122.  *   'password' => 'password',
  123.  *   'host' => 'localhost',
  124.  *   'prefix' => 'main_',
  125.  *   'collation' => 'utf8_general_ci',
  126.  * );
  127.  * @endcode
  128.  *
  129.  * For handling full UTF-8 in MySQL, including multi-byte characters such as
  130.  * emojis, Asian symbols, and mathematical symbols, you may set the collation
  131.  * and charset to "utf8mb4" prior to running install.php:
  132.  * @code
  133.  * $databases['default']['default'] = array(
  134.  *   'driver' => 'mysql',
  135.  *   'database' => 'databasename',
  136.  *   'username' => 'username',
  137.  *   'password' => 'password',
  138.  *   'host' => 'localhost',
  139.  *   'charset' => 'utf8mb4',
  140.  *   'collation' => 'utf8mb4_general_ci',
  141.  * );
  142.  * @endcode
  143.  * When using this setting on an existing installation, ensure that all existing
  144.  * tables have been converted to the utf8mb4 charset, for example by using the
  145.  * utf8mb4_convert contributed project available at
  146.  * https://www.drupal.org/project/utf8mb4_convert, so as to prevent mixing data
  147.  * with different charsets.
  148.  * Note this should only be used when all of the following conditions are met:
  149.  * - In order to allow for large indexes, MySQL must be set up with the
  150.  *   following my.cnf settings:
  151.  *     [mysqld]
  152.  *     innodb_large_prefix=true
  153.  *     innodb_file_format=barracuda
  154.  *     innodb_file_per_table=true
  155.  *   These settings are available as of MySQL 5.5.14, and are defaults in
  156.  *   MySQL 5.7.7 and up.
  157.  * - The PHP MySQL driver must support the utf8mb4 charset (libmysqlclient
  158.  *   5.5.3 and up, as well as mysqlnd 5.0.9 and up).
  159.  * - The MySQL server must support the utf8mb4 charset (5.5.3 and up).
  160.  *
  161.  * You can optionally set prefixes for some or all database table names
  162.  * by using the 'prefix' setting. If a prefix is specified, the table
  163.  * name will be prepended with its value. Be sure to use valid database
  164.  * characters only, usually alphanumeric and underscore. If no prefixes
  165.  * are desired, leave it as an empty string ''.
  166.  *
  167.  * To have all database names prefixed, set 'prefix' as a string:
  168.  * @code
  169.  *   'prefix' => 'main_',
  170.  * @endcode
  171.  * To provide prefixes for specific tables, set 'prefix' as an array.
  172.  * The array's keys are the table names and the values are the prefixes.
  173.  * The 'default' element is mandatory and holds the prefix for any tables
  174.  * not specified elsewhere in the array. Example:
  175.  * @code
  176.  *   'prefix' => array(
  177.  *     'default'   => 'main_',
  178.  *     'users'     => 'shared_',
  179.  *     'sessions'  => 'shared_',
  180.  *     'role'      => 'shared_',
  181.  *     'authmap'   => 'shared_',
  182.  *   ),
  183.  * @endcode
  184.  * You can also use a reference to a schema/database as a prefix. This may be
  185.  * useful if your Drupal installation exists in a schema that is not the default
  186.  * or you want to access several databases from the same code base at the same
  187.  * time.
  188.  * Example:
  189.  * @code
  190.  *   'prefix' => array(
  191.  *     'default'   => 'main.',
  192.  *     'users'     => 'shared.',
  193.  *     'sessions'  => 'shared.',
  194.  *     'role'      => 'shared.',
  195.  *     'authmap'   => 'shared.',
  196.  *   );
  197.  * @endcode
  198.  * NOTE: MySQL and SQLite's definition of a schema is a database.
  199.  *
  200.  * Advanced users can add or override initial commands to execute when
  201.  * connecting to the database server, as well as PDO connection settings. For
  202.  * example, to enable MySQL SELECT queries to exceed the max_join_size system
  203.  * variable, and to reduce the database connection timeout to 5 seconds:
  204.  *
  205.  * @code
  206.  * $databases['default']['default'] = array(
  207.  *   'init_commands' => array(
  208.  *     'big_selects' => 'SET SQL_BIG_SELECTS=1',
  209.  *   ),
  210.  *   'pdo' => array(
  211.  *     PDO::ATTR_TIMEOUT => 5,
  212.  *   ),
  213.  * );
  214.  * @endcode
  215.  *
  216.  * WARNING: These defaults are designed for database portability. Changing them
  217.  * may cause unexpected behavior, including potential data loss.
  218.  *
  219.  * @see DatabaseConnection_mysql::__construct
  220.  * @see DatabaseConnection_pgsql::__construct
  221.  * @see DatabaseConnection_sqlite::__construct
  222.  *
  223.  * Database configuration format:
  224.  * @code
  225.  *   $databases['default']['default'] = array(
  226.  *     'driver' => 'mysql',
  227.  *     'database' => 'databasename',
  228.  *     'username' => 'username',
  229.  *     'password' => 'password',
  230.  *     'host' => 'localhost',
  231.  *     'prefix' => '',
  232.  *   );
  233.  *   $databases['default']['default'] = array(
  234.  *     'driver' => 'pgsql',
  235.  *     'database' => 'databasename',
  236.  *     'username' => 'username',
  237.  *     'password' => 'password',
  238.  *     'host' => 'localhost',
  239.  *     'prefix' => '',
  240.  *   );
  241.  *   $databases['default']['default'] = array(
  242.  *     'driver' => 'sqlite',
  243.  *     'database' => '/path/to/databasefilename',
  244.  *   );
  245.  * @endcode
  246.  */
  247. $databases = array (
  248.   'default' =>
  249.     array (
  250.       'default' =>
  251.         array (
  252.           'database' => '{{database.name}}',
  253.           'username' => '{{database.username}}',
  254.           'password' => '{{database.password}}',
  255.           'host' => '{{database.host}}',
  256.           'port' => '',
  257.           'driver' => 'mysql',
  258.           'prefix' => '',
  259.         ),
  260.     ),
  261. );
  262.  
  263.  
  264. /**
  265.  * Access control for update.php script.
  266.  *
  267.  * If you are updating your Drupal installation using the update.php script but
  268.  * are not logged in using either an account with the "Administer software
  269.  * updates" permission or the site maintenance account (the account that was
  270.  * created during installation), you will need to modify the access check
  271.  * statement below. Change the FALSE to a TRUE to disable the access check.
  272.  * After finishing the upgrade, be sure to open this file again and change the
  273.  * TRUE back to a FALSE!
  274.  */
  275. $update_free_access = FALSE;
  276.  
  277. /**
  278.  * Salt for one-time login links and cancel links, form tokens, etc.
  279.  *
  280.  * This variable will be set to a random value by the installer. All one-time
  281.  * login links will be invalidated if the value is changed. Note that if your
  282.  * site is deployed on a cluster of web servers, you must ensure that this
  283.  * variable has the same value on each server. If this variable is empty, a hash
  284.  * of the serialized database credentials will be used as a fallback salt.
  285.  *
  286.  * For enhanced security, you may set this variable to a value using the
  287.  * contents of a file outside your docroot that is never saved together
  288.  * with any backups of your Drupal files and database.
  289.  *
  290.  * Example:
  291.  *   $drupal_hash_salt = file_get_contents('/home/example/salt.txt');
  292.  *
  293.  */
  294. $drupal_hash_salt = 'UjCPWqK2rtgx60YoN7G9oTL0E2VNvRujGBX1pbNYbpQ';
  295.  
  296. /**
  297.  * Base URL (optional).
  298.  *
  299.  * If Drupal is generating incorrect URLs on your site, which could
  300.  * be in HTML headers (links to CSS and JS files) or visible links on pages
  301.  * (such as in menus), uncomment the Base URL statement below (remove the
  302.  * leading hash sign) and fill in the absolute URL to your Drupal installation.
  303.  *
  304.  * You might also want to force users to use a given domain.
  305.  * See the .htaccess file for more information.
  306.  *
  307.  * Examples:
  308.  *   $base_url = 'http://www.example.com';
  309.  *   $base_url = 'http://www.example.com:8888';
  310.  *   $base_url = 'http://www.example.com/drupal';
  311.  *   $base_url = 'https://www.example.com:8888/drupal';
  312.  *
  313.  * It is not allowed to have a trailing slash; Drupal will add it
  314.  * for you.
  315.  */
  316. # $base_url = 'http://www.example.com';  // NO trailing slash!
  317.  
  318. /**
  319.  * PHP settings:
  320.  *
  321.  * To see what PHP settings are possible, including whether they can be set at
  322.  * runtime (by using ini_set()), read the PHP documentation:
  323.  * http://www.php.net/manual/ini.list.php
  324.  * See drupal_environment_initialize() in includes/bootstrap.inc for required
  325.  * runtime settings and the .htaccess file for non-runtime settings. Settings
  326.  * defined there should not be duplicated here so as to avoid conflict issues.
  327.  */
  328.  
  329. /**
  330.  * Some distributions of Linux (most notably Debian) ship their PHP
  331.  * installations with garbage collection (gc) disabled. Since Drupal depends on
  332.  * PHP's garbage collection for clearing sessions, ensure that garbage
  333.  * collection occurs by using the most common settings.
  334.  */
  335. ini_set('session.gc_probability', 1);
  336. ini_set('session.gc_divisor', 100);
  337.  
  338. /**
  339.  * Set session lifetime (in seconds), i.e. the time from the user's last visit
  340.  * to the active session may be deleted by the session garbage collector. When
  341.  * a session is deleted, authenticated users are logged out, and the contents
  342.  * of the user's $_SESSION variable is discarded.
  343.  */
  344. ini_set('session.gc_maxlifetime', 200000);
  345.  
  346. /**
  347.  * Set session cookie lifetime (in seconds), i.e. the time from the session is
  348.  * created to the cookie expires, i.e. when the browser is expected to discard
  349.  * the cookie. The value 0 means "until the browser is closed".
  350.  */
  351. ini_set('session.cookie_lifetime', 2000000);
  352.  
  353. /**
  354.  * If you encounter a situation where users post a large amount of text, and
  355.  * the result is stripped out upon viewing but can still be edited, Drupal's
  356.  * output filter may not have sufficient memory to process it.  If you
  357.  * experience this issue, you may wish to uncomment the following two lines
  358.  * and increase the limits of these variables.  For more information, see
  359.  * http://php.net/manual/pcre.configuration.php.
  360.  */
  361. # ini_set('pcre.backtrack_limit', 200000);
  362. # ini_set('pcre.recursion_limit', 200000);
  363.  
  364. /**
  365.  * Drupal automatically generates a unique session cookie name for each site
  366.  * based on its full domain name. If you have multiple domains pointing at the
  367.  * same Drupal site, you can either redirect them all to a single domain (see
  368.  * comment in .htaccess), or uncomment the line below and specify their shared
  369.  * base domain. Doing so assures that users remain logged in as they cross
  370.  * between your various domains. Make sure to always start the $cookie_domain
  371.  * with a leading dot, as per RFC 2109.
  372.  */
  373. # $cookie_domain = '.example.com';
  374.  
  375. /**
  376.  * Variable overrides:
  377.  *
  378.  * To override specific entries in the 'variable' table for this site,
  379.  * set them here. You usually don't need to use this feature. This is
  380.  * useful in a configuration file for a vhost or directory, rather than
  381.  * the default settings.php. Any configuration setting from the 'variable'
  382.  * table can be given a new value. Note that any values you provide in
  383.  * these variable overrides will not be modifiable from the Drupal
  384.  * administration interface.
  385.  *
  386.  * The following overrides are examples:
  387.  * - site_name: Defines the site's name.
  388.  * - theme_default: Defines the default theme for this site.
  389.  * - anonymous: Defines the human-readable name of anonymous users.
  390.  * Remove the leading hash signs to enable.
  391.  */
  392. # $conf['site_name'] = 'My Drupal site';
  393. # $conf['theme_default'] = 'garland';
  394. # $conf['anonymous'] = 'Visitor';
  395.  
  396. /**
  397.  * A custom theme can be set for the offline page. This applies when the site
  398.  * is explicitly set to maintenance mode through the administration page or when
  399.  * the database is inactive due to an error. It can be set through the
  400.  * 'maintenance_theme' key. The template file should also be copied into the
  401.  * theme. It is located inside 'modules/system/maintenance-page.tpl.php'.
  402.  * Note: This setting does not apply to installation and update pages.
  403.  */
  404. # $conf['maintenance_theme'] = 'bartik';
  405.  
  406. /**
  407.  * Reverse Proxy Configuration:
  408.  *
  409.  * Reverse proxy servers are often used to enhance the performance
  410.  * of heavily visited sites and may also provide other site caching,
  411.  * security, or encryption benefits. In an environment where Drupal
  412.  * is behind a reverse proxy, the real IP address of the client should
  413.  * be determined such that the correct client IP address is available
  414.  * to Drupal's logging, statistics, and access management systems. In
  415.  * the most simple scenario, the proxy server will add an
  416.  * X-Forwarded-For header to the request that contains the client IP
  417.  * address. However, HTTP headers are vulnerable to spoofing, where a
  418.  * malicious client could bypass restrictions by setting the
  419.  * X-Forwarded-For header directly. Therefore, Drupal's proxy
  420.  * configuration requires the IP addresses of all remote proxies to be
  421.  * specified in $conf['reverse_proxy_addresses'] to work correctly.
  422.  *
  423.  * Enable this setting to get Drupal to determine the client IP from
  424.  * the X-Forwarded-For header (or $conf['reverse_proxy_header'] if set).
  425.  * If you are unsure about this setting, do not have a reverse proxy,
  426.  * or Drupal operates in a shared hosting environment, this setting
  427.  * should remain commented out.
  428.  *
  429.  * In order for this setting to be used you must specify every possible
  430.  * reverse proxy IP address in $conf['reverse_proxy_addresses'].
  431.  * If a complete list of reverse proxies is not available in your
  432.  * environment (for example, if you use a CDN) you may set the
  433.  * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
  434.  * Be aware, however, that it is likely that this would allow IP
  435.  * address spoofing unless more advanced precautions are taken.
  436.  */
  437. # $conf['reverse_proxy'] = TRUE;
  438.  
  439. /**
  440.  * Specify every reverse proxy IP address in your environment.
  441.  * This setting is required if $conf['reverse_proxy'] is TRUE.
  442.  */
  443. # $conf['reverse_proxy_addresses'] = array('a.b.c.d', ...);
  444.  
  445. /**
  446.  * Set this value if your proxy server sends the client IP in a header
  447.  * other than X-Forwarded-For.
  448.  */
  449. # $conf['reverse_proxy_header'] = 'HTTP_X_CLUSTER_CLIENT_IP';
  450.  
  451. /**
  452.  * Page caching:
  453.  *
  454.  * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
  455.  * views. This tells a HTTP proxy that it may return a page from its local
  456.  * cache without contacting the web server, if the user sends the same Cookie
  457.  * header as the user who originally requested the cached page. Without "Vary:
  458.  * Cookie", authenticated users would also be served the anonymous page from
  459.  * the cache. If the site has mostly anonymous users except a few known
  460.  * editors/administrators, the Vary header can be omitted. This allows for
  461.  * better caching in HTTP proxies (including reverse proxies), i.e. even if
  462.  * clients send different cookies, they still get content served from the cache.
  463.  * However, authenticated users should access the site directly (i.e. not use an
  464.  * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
  465.  * getting cached pages from the proxy.
  466.  */
  467. # $conf['omit_vary_cookie'] = TRUE;
  468.  
  469. /**
  470.  * CSS/JS aggregated file gzip compression:
  471.  *
  472.  * By default, when CSS or JS aggregation and clean URLs are enabled Drupal will
  473.  * store a gzip compressed (.gz) copy of the aggregated files. If this file is
  474.  * available then rewrite rules in the default .htaccess file will serve these
  475.  * files to browsers that accept gzip encoded content. This allows pages to load
  476.  * faster for these users and has minimal impact on server load. If you are
  477.  * using a webserver other than Apache httpd, or a caching reverse proxy that is
  478.  * configured to cache and compress these files itself you may want to uncomment
  479.  * one or both of the below lines, which will prevent gzip files being stored.
  480.  */
  481. # $conf['css_gzip_compression'] = FALSE;
  482. # $conf['js_gzip_compression'] = FALSE;
  483.  
  484. /**
  485.  * Block caching:
  486.  *
  487.  * Block caching may not be compatible with node access modules depending on
  488.  * how the original block cache policy is defined by the module that provides
  489.  * the block. By default, Drupal therefore disables block caching when one or
  490.  * more modules implement hook_node_grants(). If you consider block caching to
  491.  * be safe on your site and want to bypass this restriction, uncomment the line
  492.  * below.
  493.  */
  494. # $conf['block_cache_bypass_node_grants'] = TRUE;
  495.  
  496. /**
  497.  * String overrides:
  498.  *
  499.  * To override specific strings on your site with or without enabling the Locale
  500.  * module, add an entry to this list. This functionality allows you to change
  501.  * a small number of your site's default English language interface strings.
  502.  *
  503.  * Remove the leading hash signs to enable.
  504.  */
  505. # $conf['locale_custom_strings_en'][''] = array(
  506. #   'forum'      => 'Discussion board',
  507. #   '@count min' => '@count minutes',
  508. # );
  509.  
  510. /**
  511.  *
  512.  * IP blocking:
  513.  *
  514.  * To bypass database queries for denied IP addresses, use this setting.
  515.  * Drupal queries the {blocked_ips} table by default on every page request
  516.  * for both authenticated and anonymous users. This allows the system to
  517.  * block IP addresses from within the administrative interface and before any
  518.  * modules are loaded. However on high traffic websites you may want to avoid
  519.  * this query, allowing you to bypass database access altogether for anonymous
  520.  * users under certain caching configurations.
  521.  *
  522.  * If using this setting, you will need to add back any IP addresses which
  523.  * you may have blocked via the administrative interface. Each element of this
  524.  * array represents a blocked IP address. Uncommenting the array and leaving it
  525.  * empty will have the effect of disabling IP blocking on your site.
  526.  *
  527.  * Remove the leading hash signs to enable.
  528.  */
  529. # $conf['blocked_ips'] = array(
  530. #   'a.b.c.d',
  531. # );
  532.  
  533. /**
  534.  * Fast 404 pages:
  535.  *
  536.  * Drupal can generate fully themed 404 pages. However, some of these responses
  537.  * are for images or other resource files that are not displayed to the user.
  538.  * This can waste bandwidth, and also generate server load.
  539.  *
  540.  * The options below return a simple, fast 404 page for URLs matching a
  541.  * specific pattern:
  542.  * - 404_fast_paths_exclude: A regular expression to match paths to exclude,
  543.  *   such as images generated by image styles, or dynamically-resized images.
  544.  *   The default pattern provided below also excludes the private file system.
  545.  *   If you need to add more paths, you can add '|path' to the expression.
  546.  * - 404_fast_paths: A regular expression to match paths that should return a
  547.  *   simple 404 page, rather than the fully themed 404 page. If you don't have
  548.  *   any aliases ending in htm or html you can add '|s?html?' to the expression.
  549.  * - 404_fast_html: The html to return for simple 404 pages.
  550.  *
  551.  * Add leading hash signs if you would like to disable this functionality.
  552.  */
  553. $conf['404_fast_paths_exclude'] = '/\/(?:styles)|(?:system\/files)\//';
  554. $conf['404_fast_paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i';
  555. $conf['404_fast_html'] = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML+RDFa 1.0//EN" "http://www.w3.org/MarkUp/DTD/xhtml-rdfa-1.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>';
  556.  
  557. /**
  558.  * By default the page request process will return a fast 404 page for missing
  559.  * files if they match the regular expression set in '404_fast_paths' and not
  560.  * '404_fast_paths_exclude' above. 404 errors will simultaneously be logged in
  561.  * the Drupal system log.
  562.  *
  563.  * You can choose to return a fast 404 page earlier for missing pages (as soon
  564.  * as settings.php is loaded) by uncommenting the line below. This speeds up
  565.  * server response time when loading 404 error pages and prevents the 404 error
  566.  * from being logged in the Drupal system log. In order to prevent valid pages
  567.  * such as image styles and other generated content that may match the
  568.  * '404_fast_paths' regular expression from returning 404 errors, it is
  569.  * necessary to add them to the '404_fast_paths_exclude' regular expression
  570.  * above. Make sure that you understand the effects of this feature before
  571.  * uncommenting the line below.
  572.  */
  573. # drupal_fast_404();
  574.  
  575. /**
  576.  * External access proxy settings:
  577.  *
  578.  * If your site must access the Internet via a web proxy then you can enter
  579.  * the proxy settings here. Currently only basic authentication is supported
  580.  * by using the username and password variables. The proxy_user_agent variable
  581.  * can be set to NULL for proxies that require no User-Agent header or to a
  582.  * non-empty string for proxies that limit requests to a specific agent. The
  583.  * proxy_exceptions variable is an array of host names to be accessed directly,
  584.  * not via proxy.
  585.  */
  586. # $conf['proxy_server'] = '';
  587. # $conf['proxy_port'] = 8080;
  588. # $conf['proxy_username'] = '';
  589. # $conf['proxy_password'] = '';
  590. # $conf['proxy_user_agent'] = '';
  591. # $conf['proxy_exceptions'] = array('127.0.0.1', 'localhost');
  592.  
  593. /**
  594.  * Authorized file system operations:
  595.  *
  596.  * The Update manager module included with Drupal provides a mechanism for
  597.  * site administrators to securely install missing updates for the site
  598.  * directly through the web user interface. On securely-configured servers,
  599.  * the Update manager will require the administrator to provide SSH or FTP
  600.  * credentials before allowing the installation to proceed; this allows the
  601.  * site to update the new files as the user who owns all the Drupal files,
  602.  * instead of as the user the webserver is running as. On servers where the
  603.  * webserver user is itself the owner of the Drupal files, the administrator
  604.  * will not be prompted for SSH or FTP credentials (note that these server
  605.  * setups are common on shared hosting, but are inherently insecure).
  606.  *
  607.  * Some sites might wish to disable the above functionality, and only update
  608.  * the code directly via SSH or FTP themselves. This setting completely
  609.  * disables all functionality related to these authorized file operations.
  610.  *
  611.  * @see http://drupal.org/node/244924
  612.  *
  613.  * Remove the leading hash signs to disable.
  614.  */
  615. # $conf['allow_authorize_operations'] = FALSE;
  616.  
  617. /**
  618.  * Theme debugging:
  619.  *
  620.  * When debugging is enabled:
  621.  * - The markup of each template is surrounded by HTML comments that contain
  622.  *   theming information, such as template file name suggestions.
  623.  * - Note that this debugging markup will cause automated tests that directly
  624.  *   check rendered HTML to fail.
  625.  *
  626.  * For more information about debugging theme templates, see
  627.  * https://www.drupal.org/node/223440#theme-debug.
  628.  *
  629.  * Not recommended in production environments.
  630.  *
  631.  * Remove the leading hash sign to enable.
  632.  */
  633. # $conf['theme_debug'] = TRUE;
  634.  
  635. /**
  636.  * CSS identifier double underscores allowance:
  637.  *
  638.  * To allow CSS identifiers to contain double underscores (.example__selector)
  639.  * for Drupal's BEM-style naming standards, uncomment the line below.
  640.  * Note that if you change this value in existing sites, existing page styles
  641.  * may be broken.
  642.  *
  643.  * @see drupal_clean_css_identifier()
  644.  */
  645. # $conf['allow_css_double_underscores'] = TRUE;
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement