API tools faq
paste
Advertisement
Guest User

Orange Pi Zero vendor fex

a guest
Nov 8th, 2016
894
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 49.87 KB | None | 0 0
raw download clone embed print report
  1. root@orangepi:/mnt/mmcblk0p1# cat sys_config.fex
  2. ;H3 dolphin-p2 board application
  3. ;H3 dolphin-p2 board application
  4. ;---------------------------------------------------------------------------------------------------------
  5. ; ?说?明?： ?脚?本?中?的?字?符?串?区?分?大?小?写?，?用?户?可?以?修?改"="?后?面?的?数?值?，?但?是?不?要?修?改?前?面?的?字?符?串
  6. ; ?描?述gpio?的?形?式?：Port:?端?口+?组?内?序?号<?功?能?分?配><?内?部?电?阻?状?态><?驱?动?能?<?劾??出?电?平?状?态>
  7. ;---------------------------------------------------------------------------------------------------------
  8.  
  9. ;---------------------------------------------------------------------------------------------------------
  10. ; matchine: the name must less then 16 byte
  11. ;---------------------------------------------------------------------------------------------------------
  12. [product]
  13. version = "100"
  14. machine = "dolphin_p2"
  15.  
  16. ;---------------------------------------------------------------------------------------------------------
  17. ; debug_mode: ?是?否?开?启?串?口?打?印?模?式,1:?开?启(?建?议?使?用), 0:?关?闭
  18. ; eraseflag: ?是?否?擦?除?量?产, 1:?擦?除?量?产(?极?度?建?议?使?用), 0:?不?擦?除?量?产
  19. ; next_work: usb?量?产?工?具(PhoenixUSBpro)?量?产?完?成?工?作?状?态,2:?重?启, 3:?关?机(?极?度?建?议?使?用), 4:?重?复?量?产
  20. ;---------------------------------------------------------------------------------------------------------
  21. [platform]
  22. debug_mode = 1
  23. eraseflag = 1
  24. next_work = 3
  25. secure_without_OS = 1
  26.  
  27. ;----------------------------------------------------------------------------------
  28. ;[target] system bootup configuration
  29. ;boot_clock = CPU boot frequency, Unit: MHz
  30. ;storage_type = boot medium, 0-nand, 1-card0, 2-card2, -1(defualt)auto scan
  31. ;----------------------------------------------------------------------------------
  32. [target]
  33. boot_clock = 1008
  34. storage_type = -1
  35. burn_key = 1
  36.  
  37. ;---------------------------------------------------------------------------------
  38. ; uboot key detect enable
  39. ; ?当keyen_flag = 1 ?时?，?支?持?按?键?检?测
  40. ; ?当keyen_flag = 0 ?时?，?不?支?持
  41. ;---------------------------------------------------------------------------------
  42. [key_detect_en]
  43. keyen_flag = 0
  44.  
  45. ;---------------------------------------------------------------------------------
  46. ;"?一?键?迃??写?功?能"?的?按?键?值?配?置?，?按?住?位?于min~max?范??内?的?按?键?都?可?以?强?制?迃??写
  47. ; fel_key_max?用?于?配?置?按?键?的?最?大?键?值
  48. ; fel_key_min?用?于?配?置?按?键?的?最?小?键?值
  49. ;---------------------------------------------------------------------------------
  50. [fel_key]
  51. fel_key_max =07
  52. fel_key_min =02
  53.  
  54. ;----------------------------------------------------------------------------------
  55. ;card boot
  56. ;logical_start?用?于?配?置?启?动?卡?上mbr?的?位?置??篹?于SD?卡sector 0?的?偏?移?，?单?位?为sector(512byte)
  57. ;sprite_gpio0?用?于?配?置?卡?量?产?时?指?示?灯?所?用?的gpio
  58. ;----------------------------------------------------------------------------------
  59. ;-------------------------------------------------------------------------------
  60. ; sprite_work_delay :
  61. ; sprite_err_delay :
  62. ; sprite_gpio0 ?： ?卡?量?产?、?一?键recovery?状?态?指?示?灯
  63. ; next_work ?： ?卡?量?产?完?成?，?工?作?状?态(?默?认?关?机)
  64. ;-------------------------------------------------------------------------------
  65. [card_boot]
  66. logical_start = 40960
  67. sprite_work_delay = 500
  68. sprite_err_delay = 200
  69. sprite_gpio0 = port:PA17<1><default><default><default>
  70. next_work = 3
  71.  
  72. ;---------------------------------------------------------------------------------
  73. ; used : 1: used this config, 0: not
  74. ; start_type : 1: start system directly when power supply, 0: wait IR/KEY to power on
  75. ; irkey_used : 1: ir key used, 0: not
  76. ; pmukey_used: 1: physical button used, 0: not
  77. ; pmukey_num : the index of gpio, only support PL
  78. ; led_power : 1: light, 0: off, the control gpio is PL10
  79. ; led_state : 1: light, 0: off, default is 0
  80. ;---------------------------------------------------------------------------------
  81. [box_start_os]
  82. used = 1
  83. start_type = 1
  84. irkey_used = 1
  85. pmukey_used = 0
  86. pmukey_num = 0
  87. led_power = 0
  88. led_state = 0
  89.  
  90. ;-------------------------------------------------------------------------------
  91. ; boot?阶?段?上?电?初?始?化GPIO
  92. ; used :?模?块?使?能?端 ?置1?：?开?启?模?块 ?置0?：?关?闭?模?块
  93. ; gpiox ?：?上?电?初?始?化gpio ?（?名?称?自?定?，?但?不?能?重?复?，?并?且GPIO?允?许?可?以?多?个?）
  94. ; PH06 : ?系?统?显?示LED GPIO
  95. ;-------------------------------------------------------------------------------
  96. [boot_init_gpio]
  97. used = 1
  98. gpio0 = port:PL10<1><default><default><0>
  99. gpio1 = port:PA17<1><default><default><1>
  100.  
  101. ;----------------------------------------------------------------------------------
  102. ; used: ?模?块?使?能?端 1?：?开?启?模?块 0?：?关?闭?模?块
  103. ; mode: ?模?式?选?择 1?：?一?键?迅?OTA?升?级 2?：?一?键?恢?复?（?通?过sysrecovery?分?区?来?恢?复?） ?其?他?值?：?无?
  104. ; recovery_key ?： ?按?键?配?置 ?（?例?如?：recovery_key= port:PH16<0><default>?）
  105. ;----------------------------------------------------------------------------------
  106. [recovery_para]
  107. used = 1
  108. mode = 2
  109. recovery_key = port:PL04<0><default><default><default>
  110.  
  111.  
  112. ;---------------------------------------------------------------------------------------------------------
  113. ; if 1 == standby_mode, then support super standby;
  114. ; else, support normal standby.
  115. ;---------------------------------------------------------------------------------------------------------
  116. [pm_para]
  117. standby_mode = 1
  118.  
  119. [card0_boot_para]
  120. card_ctrl = 0
  121. card_high_speed = 1
  122. card_line = 4
  123. sdc_d1 = port:PF00<2><1><2><default>
  124. sdc_d0 = port:PF01<2><1><2><default>
  125. sdc_clk = port:PF02<2><1><2><default>
  126. sdc_cmd = port:PF03<2><1><2><default>
  127. sdc_d3 = port:PF04<2><1><2><default>
  128. sdc_d2 = port:PF05<2><1><2><default>
  129.  
  130. [card2_boot_para]
  131. card_ctrl = 2
  132. card_high_speed = 1
  133. card_line = 8
  134. sdc_cmd = port:PC06<3><1><2><default>
  135. sdc_clk = port:PC05<3><1><2><default>
  136. sdc_d0 = port:PC08<3><1><2><default>
  137. sdc_d1 = port:PC09<3><1><2><default>
  138. sdc_d2 = port:PC10<3><1><2><default>
  139. sdc_d3 = port:PC11<3><1><2><default>
  140. sdc_d4 = port:PC12<3><1><2><default>
  141. sdc_d5 = port:PC13<3><1><2><default>
  142. sdc_d6 = port:PC14<3><1><2><default>
  143. sdc_d7 = port:PC15<3><1><2><default>
  144. sdc_2xmode = 1
  145. sdc_ddrmode = 1
  146.  
  147. [twi_para]
  148. twi_port = 0
  149. twi_scl = port:PA11<2><default><default><default>
  150. twi_sda = port:PA12<2><default><default><default>
  151.  
  152. [uart_para]
  153. uart_debug_port = 0
  154. uart_debug_tx = port:PA04<2><1><default><default>
  155. uart_debug_rx = port:PA05<2><1><default><default>
  156.  
  157. [force_uart_para]
  158. force_uart_port = 0
  159. ;force_uart_tx = port:PF02<3><1><default><default>
  160. ;force_uart_rx = port:PF04<3><1><default><default>
  161. force_uart_tx =
  162. force_uart_rx =
  163.  
  164. [jtag_para]
  165. jtag_enable = 1
  166. jtag_ms = port:PA00<3><default><default><default>
  167. jtag_ck = port:PA01<3><default><default><default>
  168. jtag_do = port:PA02<3><default><default><default>
  169. jtag_di = port:PA03<3><default><default><default>
  170.  
  171. [clock]
  172. pll_video = 297
  173. pll_ve = 402
  174. pll_periph0 = 600
  175. pll_gpu = 576
  176. pll_periph1 = 600
  177. pll_de = 864
  178.  
  179. ;*****************************************************************************
  180. ;sdram configuration
  181. ;
  182. ; dram_tpr7[31:31]=1, use gpio type to detect dram type and
  183. ; dram_tpr7[31:31]=0, not use gpio type to detect dram type.
  184. ;
  185. ; if set ddr type auto detect, use dram_tpr7 to set dram clk.
  186. ; for example: if dram_tpr13[13:13] = 1, it use
  187. ; dram_tpr7[29:20] to set lpddr2 clk,
  188. ; dram_tpr7[19:10] to set lpddr3 clk,
  189. ; dram_tpr7[9:0] to set ddr3 or ddr3l clk.
  190. ;*****************************************************************************
  191. [dram_para]
  192. dram_clk = 576
  193. dram_type = 3
  194. dram_zq = 0x3b3bfb
  195. dram_odt_en = 0x1
  196. dram_para1 = 0x10E40000
  197. dram_para2 = 0x0000
  198. dram_mr0 = 0x1840
  199. dram_mr1 = 0x40
  200. dram_mr2 = 0x18
  201. dram_mr3 = 0x2
  202. dram_tpr0 = 0x0048A192
  203. dram_tpr1 = 0x01C2418D
  204. dram_tpr2 = 0x00076051
  205. dram_tpr3 = 0
  206. dram_tpr4 = 0
  207. dram_tpr5 = 0
  208. dram_tpr6 = 100
  209. dram_tpr7 = 0x13890240
  210. dram_tpr8 = 0
  211. dram_tpr9 = 0
  212. dram_tpr10 = 0
  213. dram_tpr11 = 0x6aaa0000
  214. dram_tpr12 = 0x7979
  215. dram_tpr13 = 0x1802800
  216. ;----------------------------------------------------------------------------------
  217. ;os life cycle para configuration
  218. ;----------------------------------------------------------------------------------
  219.  
  220. ;---------------------------------------------------------------------------------------------------------
  221. ; wakeup_src_para:
  222. ; sometimes, u would like to add more wakeup src in standby mode, these para will be
  223. ; help;
  224. ; u need to make sure the standby mode support the wakeup src. Also, some hw
  225. ; condition must be guaranteed.
  226. ; including:
  227. ; cpu_en: power on or off.
  228. ; 1: mean power on
  229. ; 0: mean power off
  230. ; cpu_freq: indicating lowest freq. unit is Mhz;
  231. ; dram selfresh_en: selfresh or not.
  232. ; 1: enable enter selfresh
  233. ; 0: disable enter selfresh
  234. ; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
  235. ; wakeup_src: to make the scenario work, the wakeup src is needed.
  236. ;---------------------------------------------------------------------------------------------------------
  237. [wakeup_src_para]
  238. cpu_en = 0
  239. cpu_freq = 48
  240. ; (cpu:apb:ahb)
  241. pll_ratio = 0x111
  242. dram_selfresh_en = 1
  243. dram_freq = 36
  244. wakeup_src0 =
  245. wakeup_src_bt = port:PL06<6><default><default><0>
  246.  
  247. ;----------------------------------------------------------------------------------
  248. ;i2c configuration
  249. ;----------------------------------------------------------------------------------
  250. [twi0]
  251. twi_used = 1
  252. twi_scl = port:PA11<2><default><default><default>
  253. twi_sda = port:PA12<2><default><default><default>
  254.  
  255. [twi1]
  256. twi_used = 1
  257. twi_scl = port:PA18<3><default><default><default>
  258. twi_sda = port:PA19<3><default><default><default>
  259.  
  260. [twi2]
  261. twi_used = 0
  262. twi_scl = port:PE12<3><default><default><default>
  263. twi_sda = port:PE13<3><default><default><default>
  264.  
  265. ;----------------------------------------------------------------------------------
  266. ;uart configuration
  267. ;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
  268. ;----------------------------------------------------------------------------------
  269. [uart0]
  270. uart_used = 1
  271. uart_port = 0
  272. uart_type = 2
  273. uart_tx = port:PA04<2><1><default><default>
  274. uart_rx = port:PA05<2><1><default><default>
  275.  
  276. [uart1]
  277. uart_used = 1
  278. uart_port = 1
  279. uart_type = 2
  280. uart_tx = port:PG06<2><1><default><default>
  281. uart_rx = port:PG07<2><1><default><default>
  282. ;uart_rts = port:PG08<2><1><default><default>
  283. ;uart_cts = port:PG09<2><1><default><default>
  284.  
  285. [uart2]
  286. uart_used = 1
  287. uart_port = 2
  288. uart_type = 4
  289. uart_tx = port:PA00<2><1><default><default>
  290. uart_rx = port:PA01<2><1><default><default>
  291. ;uart_rts = port:PA02<2><1><default><default>
  292. ;uart_cts = port:PA03<2><1><default><default>
  293.  
  294. [uart3]
  295. uart_used = 0
  296. uart_port = 3
  297. uart_type = 4
  298. uart_tx = port:PA13<3><1><default><default>
  299. uart_rx = port:PA14<3><1><default><default>
  300. uart_rts = port:PA15<3><1><default><default>
  301. uart_cts = port:PA16<3><1><default><default>
  302.  
  303. ;----------------------------------------------------------------------------------
  304. ;SPI controller configuration
  305. ;----------------------------------------------------------------------------------
  306. [spi0]
  307. spi_used = 0
  308. spi_cs_bitmap = 1
  309. spi_mosi = port:PC00<3><default><default><default>
  310. spi_miso = port:PC01<3><default><default><default>
  311. spi_sclk = port:PC02<3><default><default><default>
  312. spi_cs0 = port:PC03<3><1><default><default>
  313.  
  314. [spi1]
  315. spi_used = 0
  316. spi_cs_bitmap = 1
  317. spi_cs0 = port:PA13<2><1><default><default>
  318. spi_sclk = port:PA14<2><default><default><default>
  319. spi_mosi = port:PA15<2><default><default><default>
  320. spi_miso = port:PA16<2><default><default><default>
  321.  
  322. ;----------------------------------------------------------------------------------
  323. ;SPI device configuration
  324. ;----------------------------------------------------------------------------------
  325. [spi_devices]
  326. spi_dev_num = 1
  327.  
  328. [spi_board0]
  329. modalias = m25p32
  330. max_speed_hz = 33000000
  331. bus_num = 0
  332. chip_select = 0
  333. mode = 0
  334.  
  335. ;----------------------------------------------------------------------------------
  336. ;userspace gpio interface for android
  337. ;----------------------------------------------------------------------------------
  338. [gpio_para]
  339. gpio_used = 1
  340. gpio_num = 2
  341. gpio_pin_1 = port:PL10<1><default><default><0>
  342. gpio_pin_2 = port:PA17<1><default><default><1>
  343.  
  344. [led_assign]
  345. normal_led = "gpio_pin_2"
  346. standby_led = "gpio_pin_1"
  347.  
  348. ;----------------------------------------------------------------------------------
  349. ;thermal configuration
  350. ;ths_trip_count : temperature trigger number
  351. ;ths_trip_0 : first temperature trigger
  352. ;ths_trip_1 : second temperature trigger
  353. ;ths_trip_2 : third temperature trigger, when upto this temperature, system shutdown
  354. ;ths_trip_0_min : first temperature trigger's min freq
  355. ;ths_trip_0_max : first temperature trigger's max freq
  356. ;ths_trip_1_min : second temperature trigger's min freq
  357. ;ths_trip_1_max : second temperature trigger's max freq
  358. ;----------------------------------------------------------------------------------
  359. [ths_para]
  360. ths_used = 1
  361. ths_trip1_count = 5
  362. ths_trip1_0 = 70
  363. ths_trip1_1 = 80
  364. ths_trip1_2 = 90
  365. ths_trip1_3 = 100
  366. ths_trip1_4 = 105
  367. ths_trip1_5 = 0
  368. ths_trip1_6 = 0
  369. ths_trip1_7 = 0
  370. ths_trip1_0_min = 0
  371. ths_trip1_0_max = 1
  372. ths_trip1_1_min = 1
  373. ths_trip1_1_max = 2
  374. ths_trip1_2_min = 2
  375. ths_trip1_2_max = 3
  376. ths_trip1_3_min = 3
  377. ths_trip1_3_max = 4
  378. ths_trip1_4_min = 4
  379. ths_trip1_4_max = 4
  380. ths_trip1_5_min = 0
  381. ths_trip1_5_max = 0
  382. ths_trip1_6_min = 0
  383. ths_trip1_6_max = 0
  384. ths_trip2_count = 1
  385. ths_trip2_0 = 105
  386. ;----------------------------------------------------------------------------------
  387. ;cooler_table cooler_count <=32
  388. ;----------------------------------------------------------------------------------
  389. [cooler_table]
  390. cooler_count = 5
  391. cooler0 = "1200000 4 4294967295 0"
  392. cooler1 = "1200000 3 4294967295 0"
  393. cooler2 = "1200000 2 4294967295 0"
  394. cooler3 = "1200000 1 4294967295 0"
  395. cooler4 = "504000 1 4294967295 0"
  396.  
  397.  
  398. [nand0_para]
  399. nand_support_2ch = 0
  400. nand_cache_level = 1
  401. nand0_used = 0
  402. nand0_we = port:PC00<2><0><1><default>
  403. nand0_ale = port:PC01<2><0><1><default>
  404. nand0_cle = port:PC02<2><0><1><default>
  405. nand0_ce1 = port:PC03<2><1><1><default>
  406. nand0_ce0 = port:PC04<2><1><1><default>
  407. nand0_nre = port:PC05<2><0><1><default>
  408. nand0_rb0 = port:PC06<2><1><1><default>
  409. nand0_rb1 = port:PC07<2><1><1><default>
  410. nand0_d0 = port:PC08<2><0><1><default>
  411. nand0_d1 = port:PC09<2><0><1><default>
  412. nand0_d2 = port:PC10<2><0><1><default>
  413. nand0_d3 = port:PC11<2><0><1><default>
  414. nand0_d4 = port:PC12<2><0><1><default>
  415. nand0_d5 = port:PC13<2><0><1><default>
  416. nand0_d6 = port:PC14<2><0><1><default>
  417. nand0_d7 = port:PC15<2><0><1><default>
  418. nand0_ndqs = port:PC16<2><0><1><default>
  419.  
  420.  
  421. ;-----------------------------------------------------------------
  422. ;auto_hpd - 1:need hotplud for hdmi/tv; 0:don't hotplud for lcd
  423. ;output_type - 0:none; 1:lcd; 2:tv; 4:hdmi; 8:vga (as default config in homlet)
  424. ;hdmi_channel- the display channel for hdmi (as default config in homlet)
  425. ;cvbs_channel- the display channel for cvbs (as default config in homlet)
  426. ;hdmi_mode - as default config for output of hdmi in homlet
  427. ;cvbs_mode - as default config for output of tv in homlet. 11:PAL; 14:NTSC
  428. ;check the definition(of hdmi/cvbs_mode) of disp_tv_mode in sunxi_display2.h
  429. ;hdmi_mode_check - disable/enable the function of checking hdmi mode, 0 is disable, 1 is enable
  430. ;-----------------------------------------------------------------
  431. [boot_disp]
  432. advert_disp = 1
  433. auto_hpd = 1
  434. output_type = 2
  435. hdmi_channel = 0
  436. hdmi_mode = 10
  437. cvbs_channel = 1
  438. cvbs_mode = 11
  439. output_full = 1
  440. hdmi_mode_check = 1
  441.  
  442. ;----------------------------------------------------------------------------------
  443. ;disp init configuration
  444. ;
  445. ;disp_mode (0:screen0<screen0,fb0>; 1:screen1<screen1,fb0>)
  446. ;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
  447. ;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
  448. ; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
  449. ;fbx format (0:ARGB 1:ABGR 2:RGBA 3:BGRA 5:RGB565 8:RGB888 12:ARGB4444 16:ARGB1555 18:RGBA5551)
  450. ;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
  451. ;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
  452. ;----------------------------------------------------------------------------------
  453. [disp_init]
  454. disp_init_enable = 1
  455. disp_mode = 1
  456.  
  457. screen0_output_type = 3
  458. screen0_output_mode = 4
  459.  
  460. screen1_output_type = 2
  461. screen1_output_mode = 11
  462.  
  463. fb0_format = 0
  464. fb0_width = 1280
  465. fb0_height = 720
  466.  
  467. fb1_format = 0
  468. fb1_width = 0
  469. fb1_height = 0
  470.  
  471. ;----------------------------------------------------------------------------------
  472. ;hdmi configuration
  473. ;----------------------------------------------------------------------------------
  474. [hdmi_para]
  475. hdmi_used = 1
  476. hdmi_power = "vcc-hdmi-18"
  477.  
  478. [tv_para]
  479. tv_used = 1
  480. tv_dac_used = 1
  481. tv_dac_src0 = 0
  482.  
  483. ;----------------------------------------------------------------------------------
  484. ;pwm config
  485. ;----------------------------------------------------------------------------------
  486. [pwm0_para]
  487. pwm_used = 0
  488. pwm_positive = port:PA05<3><0><default><default>
  489.  
  490. ;------------------------------------------------------------------------------;
  491. ; 10/100/100Mbps Ethernet MAC Controller Configure ;
  492. ;------------------------------------------------------------------------------;
  493. ; Options: ;
  494. ; gmac_used --- 0: not used, 1: external phy, 2: internal phy ;
  495. ; gmac_powerx -- A[:B] A: axp channel, B: voltage value ;
  496. : If set gamc_phy to use internal PHY, do not config port ;
  497. ;------------------------------------------------------------------------------;
  498. ; MII RMII MII RMII MII RMII ;
  499. ; PD00 * PD06 * * PD12 * * ;
  500. ; PD01 * PD07 * PD13 * * ;
  501. ; PD02 * * PD08 * PD14 * ;
  502. ; PD03 * * PD09 * * PD15 * ;
  503. ; PD04 * PD10 * * PD16 * * ;
  504. ; PD05 * PD11 * * PD17 * * ;
  505. ;------------------------------------------------------------------------------;
  506. [gmac0]
  507. gmac_used = 2
  508. ;gmac_rxd3 = port:PD00<2><default><3><default>
  509. ;gmac_rxd2 = port:PD01<2><default><3><default>
  510. ;gmac_rxd1 = port:PD02<2><default><3><default>
  511. ;gmac_rxd0 = port:PD03<2><default><3><default>
  512. ;gmac_rxclk = port:PD04<2><default><3><default>
  513. ;gmac_rxdv = port:PD05<2><default><3><default>
  514. ;gmac_rxerr = port:PD06<2><default><3><default>
  515. ;gmac_txd3 = port:PD07<2><default><3><default>
  516. ;gmac_txd2 = port:PD08<2><default><3><default>
  517. ;gmac_txd1 = port:PD09<2><default><3><default>
  518. ;gmac_txd0 = port:PD10<2><default><3><default>
  519. ;gmac_crs = port:PD11<2><default><3><default>
  520. ;gmac_txclk = port:PD12<2><default><3><default>
  521. ;gmac_txen = port:PD13<2><default><3><default>
  522. ;gmac_txerr = port:PD14<2><default><3><default>
  523. ;gmac_col = port:PD15<2><default><3><default>
  524. ;gmac_mdc = port:PD16<2><default><3><default>
  525. ;gmac_mdio = port:PD17<2><default><3><default>
  526. gmac_power1 =
  527.  
  528. ;--------------------------------------------------------------------------------
  529. ;vip (video input port) configuration
  530. ;vip_used: 0:disable 1:enable
  531. ;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
  532. ;vip_dev_qty: The quantity of devices linked to capture bus
  533. ;
  534. ;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and
  535. ; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured!
  536. ;
  537. ;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,
  538. ;vip_dev(x)_pos must be configured!
  539. ;
  540. ;vip_dev(x)_isp_used 0:not use isp 1:use isp
  541. ;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
  542. ;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
  543. ;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
  544. ;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
  545. ;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
  546. ;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
  547. ;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
  548. ;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
  549. ;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
  550. ;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
  551. ;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
  552. ;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
  553. ;x indicates the index of the devices which are linked to the same capture bus
  554. ;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
  555. ;fill handle string as below:
  556. ;axp22_eldo3
  557. ;axp22_dldo4
  558. ;axp22_eldo2
  559. ;fill handle string "" when not using any pmu power supply
  560. ;--------------------------------------------------------------------------------
  561.  
  562. [csi0]
  563.  
  564. vip_used = 0
  565. vip_mode = 0
  566. vip_dev_qty = 1
  567. vip_define_sensor_list = 0
  568.  
  569. vip_csi_pck = port:PE00<2><default><default><default>
  570. vip_csi_mck = port:PE01<2><default><default><default>
  571. vip_csi_hsync = port:PE02<2><default><default><default>
  572. vip_csi_vsync = port:PE03<2><default><default><default>
  573. vip_csi_d0 = port:PE04<2><default><default><default>
  574. vip_csi_d1 = port:PE05<2><default><default><default>
  575. vip_csi_d2 = port:PE06<2><default><default><default>
  576. vip_csi_d3 = port:PE07<2><default><default><default>
  577. vip_csi_d4 = port:PE08<2><default><default><default>
  578. vip_csi_d5 = port:PE09<2><default><default><default>
  579. vip_csi_d6 = port:PE10<2><default><default><default>
  580. vip_csi_d7 = port:PE11<2><default><default><default>
  581. vip_csi_sck = port:PE12<2><default><default><default>
  582. vip_csi_sda = port:PE13<2><default><default><default>
  583.  
  584. vip_dev0_mname = "ov5640"
  585. vip_dev0_pos = "rear"
  586. vip_dev0_lane = 1
  587. vip_dev0_twi_id = 0
  588. vip_dev0_twi_addr = 0x78
  589. vip_dev0_isp_used = 0
  590. vip_dev0_fmt = 0
  591. vip_dev0_stby_mode = 0
  592. vip_dev0_vflip = 0
  593. vip_dev0_hflip = 0
  594. vip_dev0_iovdd = ""
  595. vip_dev0_iovdd_vol = 2800000
  596. vip_dev0_avdd = ""
  597. vip_dev0_avdd_vol = 2800000
  598. vip_dev0_dvdd = ""
  599. vip_dev0_dvdd_vol = 1500000
  600. vip_dev0_afvdd = ""
  601. vip_dev0_afvdd_vol = 2800000
  602. vip_dev0_power_en =
  603. vip_dev0_reset =
  604. vip_dev0_pwdn =
  605. vip_dev0_flash_en =
  606. vip_dev0_flash_mode =
  607. vip_dev0_af_pwdn =
  608.  
  609. vip_dev0_act_used = 0
  610. vip_dev0_act_name = "ad5820_act"
  611. vip_dev0_act_slave = 0x18
  612.  
  613.  
  614. vip_dev1_mname = ""
  615. vip_dev1_pos = "front"
  616. vip_dev1_lane = 1
  617. vip_dev1_twi_id = 0
  618. vip_dev1_twi_addr =
  619. vip_dev1_isp_used = 0
  620. vip_dev1_fmt = 1
  621. vip_dev1_stby_mode = 0
  622. vip_dev1_vflip = 0
  623. vip_dev1_hflip = 0
  624. vip_dev1_iovdd = ""
  625. vip_dev1_iovdd_vol = 2800000
  626. vip_dev1_avdd = ""
  627. vip_dev1_avdd_vol = 2800000
  628. vip_dev1_dvdd = ""
  629. vip_dev1_dvdd_vol = 1500000
  630. vip_dev1_afvdd = ""
  631. vip_dev1_afvdd_vol = 2800000
  632. vip_dev1_power_en =
  633. vip_dev1_reset =
  634. vip_dev1_pwdn =
  635. vip_dev1_flash_en =
  636. vip_dev1_flash_mode =
  637. vip_dev1_af_pwdn =
  638.  
  639.  
  640. ;--------------------------------------------------------------------------------
  641. ;tv configuration
  642. ;
  643. ;--------------------------------------------------------------------------------
  644. [tvout_para]
  645. tvout_used = 1
  646. tvout_channel_num = 1
  647. tv_en =
  648.  
  649. [tvin_para]
  650. tvin_used =
  651. tvin_channel_num =
  652.  
  653. ;----------------------------------------------------------------------------------
  654. ;DE-Interlace configuration
  655. ;----------------------------------------------------------------------------------
  656. [di_para]
  657. di_used = 1
  658.  
  659. ;--------------------------------------------------------------------------------
  660. ; SDMMC PINS MAPPING |
  661. ; ------------------------------------------------------------------------------|
  662. ; Config Guide |
  663. ; sdc_used: 1-enable card, 0-disable card |
  664. ; sdc_detmode: card detect mode |
  665. ; 1-detect card by gpio polling |
  666. ; 2-detect card by gpio irq(must use IO with irq function) |
  667. ; 3-no detect, always in for boot card |
  668. ; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert|
  669. ; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit |
  670. ; sdc_use_wp: 1-with write protect IO, 0-no write protect IO |
  671. ; sdc_isio: for sdio card |
  672. ; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for|
  673. ; SD3.0 or eMMC4.5, regulator must be configured. the value is |
  674. ; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2" |
  675. ; other: GPIO Mapping configuration |
  676. ; ------------------------------------------------------------------------------|
  677. ; Note: |
  678. ; 1 if detmode=2, sdc_det's config=6 |
  679. ; else if detmode=1, sdc_det's config=0 |
  680. ; else sdc_det IO is not necessary |
  681. ; 2 if the customer wants to support UHS-I and HS200 features, he must provide|
  682. ; an independent power supply for the card. This is only used in platforms |
  683. ; that supports SD3.0 cards and eMMC4.4+ flashes |
  684. ;--------------------------------------------------------------------------------
  685. [mmc0_para]
  686. sdc_used = 1
  687. sdc_detmode = 1
  688. sdc_buswidth = 4
  689. sdc_clk = port:PF02<2><1><2><default>
  690. sdc_cmd = port:PF03<2><1><2><default>
  691. sdc_d0 = port:PF01<2><1><2><default>
  692. sdc_d1 = port:PF00<2><1><2><default>
  693. sdc_d2 = port:PF05<2><1><2><default>
  694. sdc_d3 = port:PF04<2><1><2><default>
  695. sdc_det = port:PF06<0><1><2><default>
  696. sdc_use_wp = 0
  697. sdc_wp =
  698. sdc_isio = 0
  699. sdc_regulator = "none"
  700. sdc_power_supply = "none"
  701.  
  702. [mmc1_para]
  703. sdc_used = 1
  704. sdc_detmode = 4
  705. sdc_buswidth = 4
  706. sdc_clk = port:PG00<2><1><2><default>
  707. sdc_cmd = port:PG01<2><1><2><default>
  708. sdc_d0 = port:PG02<2><1><2><default>
  709. sdc_d1 = port:PG03<2><1><2><default>
  710. sdc_d2 = port:PG04<2><1><2><default>
  711. sdc_d3 = port:PG05<2><1><2><default>
  712. sdc_det =
  713. sdc_use_wp = 0
  714. sdc_wp =
  715. sdc_isio = 1
  716. sdc_regulator = "none"
  717. sdc_power_supply = "none"
  718. sdc_2xmode = 1
  719. sdc_ddrmode = 1
  720.  
  721. [mmc2_para]
  722. sdc_used = 0
  723. sdc_detmode = 3
  724. sdc_buswidth = 8
  725. sdc_clk = port:PC05<3><1><2><default>
  726. sdc_cmd = port:PC06<3><1><2><default>
  727. sdc_d0 = port:PC08<3><1><2><default>
  728. sdc_d1 = port:PC09<3><1><2><default>
  729. sdc_d2 = port:PC10<3><1><2><default>
  730. sdc_d3 = port:PC11<3><1><2><default>
  731. sdc_d4 = port:PC12<3><1><2><default>
  732. sdc_d5 = port:PC13<3><1><2><default>
  733. sdc_d6 = port:PC14<3><1><2><default>
  734. sdc_d7 = port:PC15<3><1><2><default>
  735. emmc_rst = port:PC16<3><1><2><default>
  736. sdc_det =
  737. sdc_use_wp = 0
  738. sdc_wp =
  739. sdc_isio = 0
  740. sb_restrict_gpio usb?侙??流?控?制pin
  741. ;usb_restric_flag: usb?限?流?标?置
  742. ;--------------------------------
  743. ;--------------------------------
  744. ;--- USB0?控?制?标?志
  745. ;-------------------------------------------------------------------------------|
  746. [usbc0]ard configuration
  747. usb_used = 1----------------------------------------------------------
  748. usb_port_type = 2
  749. usb_detect_type = 1
  750. usb_id_gpio = port:PG12<0><1><default><default>fault>
  751. usb_det_vbus_gpio = port:PG12<0><1><default><default>fault>
  752. usb_drv_vbus_gpio = port:PL02<1><0><default><0>lt><default>
  753. usb_host_init_state = 1ort:PA10<2><default><default><default>
  754. usb_restrict_gpio = port:PA06<2><default><default><default>
  755. usb_restric_flag = 0ort:PA07<2><default><default><default>
  756. usb_restric_voltage = 355000008<2><default><default><default>
  757. usb_restric_capacity= 5
  758. usb_regulator_io = "nocare"
  759. usb_regulator_vol = 0----------
  760. usb_not_suspend = 0 ?配?置?。
  761. ;usb_used?：USB?使?能?标?志?。?置1?，?表?示?系?统?中USB?模?块?可?用,?置0,?则?表?示?系?统USB?禁?用?。
  762. ;--------------------------------用?情?况?。 0?：device only;1?：host only;2?：OTG
  763. ;--- USB1?控?制?标?志 ?的?检?查?方?式?。0?：?不?做?检?测;1?：vbus/id?检?查;2?：id/dpdm?检?查
  764. ;-------------------------------- ?。?具?体?请?参?考gpio?配?置?说?明?。
  765. [usbc1]t_vbus_gpio?：USB DET_VBUS pin?脚?配?置?。?具?体?请?参?考gpio?配?置?说?明?。
  766. usb_used = 1B DRY_VBUS pin?脚?配?置?。?具?体?请?参?考gpio?配?置?说?明?。
  767. usb_drv_vbus_gpio = xp_ctrl",?表?示axp ?提?
  768. usb_restrict_gpio =
  769. usb_host_init_state = 1
  770. usb_restric_flag = 0
  771. usb_regulator_io = "nocare"
  772. usb_regulator_vol = 0
  773. usb_not_suspend = 0
  774.  
  775. ;--------------------------------
  776. ;--- USB2?控?制?标?志
  777. ;--------------------------------
  778. [usbc2]
  779. usb_used = 1
  780. usb_drv_vbus_gpio =
  781. usb_restrict_gpio =
  782. usb_host_init_state = 1
  783. usb_restric_flag = 0
  784. usb_regulator_io = "nocare"
  785. usb_regulator_vol = 0
  786. usb_not_suspend = 0
  787.  
  788. ;--------------------------------
  789. ;--- USB3?控?制?标?志
  790. ;--------------------------------
  791. [usbc3]
  792. usb_used = 1
  793. usb_drv_vbus_gpio =
  794. usb_restrict_gpio =
  795. usb_host_init_state = 0
  796. usb_restric_flag = 0
  797. usb_regulator_io = "nocare"
  798. usb_regulator_vol = 0
  799. usb_not_suspend = 0
  800.  
  801. ;--------------------------------
  802. ;--- USB Device
  803. ;--------------------------------
  804. [usb_feature]
  805. vendor_id = 0x18D1
  806. mass_storage_id = 0x0001
  807. adb_id = 0x0002
  808.  
  809. manufacturer_name = "USB Developer"
  810. product_name = "Android"
  811. serial_number = "20080411"
  812.  
  813. [msc_feature]
  814. vendor_name = "USB 2.0"
  815. product_name = "USB Flash Driver"
  816. release = 100
  817. luns = 3
  818.  
  819. [serial_feature]
  820. serial_unique = 0
  821.  
  822.  
  823. ;--------------------------------------------------------------------------------
  824. ;wifi/bt/fm/gps/nfc modules configuration
  825. ;module_power0: axp used by module, "axp22_dldo1" - use dldo1, not use keep it empty
  826. ;module_power0_vol: power0 voltage, mv;
  827. ;module_select_pin0: select rtl8723bs or rtl8703as;module_select_pin1: select ap6181 or ap6210;
  828. ;chip_en: enable chip io
  829. ;lpo_use_apclk: ""- not use, "losc_out"- a23/33/H3, "ac10032k1"?、"ac10032k2"?、"ac10032k3"- a80
  830. ;--------------------------------------------------------------------------------
  831. [module_para]
  832. module_power0 = port:PA20<1><default><default><0>
  833. module_power0_vol = 1
  834. module_power1 =
  835. module_power1_vol =
  836. module_power2 =
  837. module_power2_vol =
  838. module_power3 =
  839. module_power3_vol =
  840. module_select_pin0 =
  841. module_select_pin1 =
  842. chip_en =
  843. lpo_use_apclk = "losc_out"
  844.  
  845. ;--------------------------------------------------------------------------------
  846. ;wifi configuration
  847. ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
  848. ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2
  849. ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
  850. ;wl_reg_on: wifi function enable pin
  851. ;wl_host_wake: wlan device wake-up host pin
  852. ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module
  853. ; 0: not used, 1: used
  854. ;--------------------------------------------------------------------------------
  855. [wifi_para]
  856. wifi_used = 1
  857. wifi_sdc_id = 1
  858. wifi_usbc_id = 3
  859. wifi_usbc_type = 1
  860. wl_reg_on = port:PL07<1><default><default><0>
  861. wl_host_wake = port:PG10<0><default><default><0>
  862. wl_host_wake_invert = 0
  863.  
  864. ;--------------------------------------------------------------------------------
  865. ;bluetooth configuration
  866. ;bt_used: 0- no used, 1- used
  867. ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2
  868. ;bt_uart_baud: uart baud rate, unit: bps
  869. ;bt_rst_n: bt function enable io
  870. ;bt_wake: host wake-up bluetooth device
  871. ;bt_host_wake: bt device wake-up host
  872. ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module
  873. ; 0: not used, 1: used
  874. ;--------------------------------------------------------------------------------
  875. [bt_para]
  876. bt_used = 0
  877. bt_uart_id = 1
  878. bt_uart_baud = 1500000
  879. bt_rst_n = port:PL01<1><default><default><0>
  880. bt_wake = port:PA12<1><default><default><0>
  881. bt_host_wake = port:PL06<0><default><default><0>
  882. bt_host_wake_invert = 0
  883.  
  884. ;--------------------------------------------------------------------------------
  885. ;daudio_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
  886. ; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
  887. ; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
  888. ; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
  889. ;daudio_select:0 is pcm.1 is i2s
  890. ;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
  891. ; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
  892. ; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
  893. ; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
  894. ; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
  895. ;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
  896. ; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
  897. ; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
  898. ; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
  899. ;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
  900. ;sample_resolution :16bits/20bits/24bits
  901. ;word_select_size :16bits/20bits/24bits/32bits
  902. ;pcm_sync_period :16/32/64/128/256
  903. ;msb_lsb_first :0: msb first; 1: lsb first
  904. ;sign_extend :0: zero pending; 1: sign extend
  905. ;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
  906. ;slot_width :8 bit width / 16 bit width
  907. ;frame_width :0: long frame = 2 clock width; 1: short frame
  908. ;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
  909. ;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
  910. ;--------------------------------------------------------------------------------
  911. [pcm0]
  912. daudio_used = 0
  913. daudio_master = 4
  914. daudio_select = 1
  915. audio_format = 1
  916. signal_inversion = 1
  917. mclk_fs = 128
  918. sample_resolution = 16
  919. slot_width_select = 32
  920. ;pcm_sync_period = 256
  921. pcm_lrck_period = 32
  922. pcm_lrckr_period = 1
  923. msb_lsb_first = 0
  924. sign_extend = 0
  925. slot_index = 0
  926. slot_width = 32
  927. frame_width = 0
  928. tx_data_mode = 0
  929. rx_data_mode = 0
  930. i2s_mclk = port:PA18<2><1><default><default>
  931. i2s_bclk = port:PA19<2><1><default><default>
  932. i2s_dout0 = port:PA20<2><1><default><default>
  933. i2s_din = port:PA21<2><1><default><default>
  934.  
  935.  
  936. [pcm1]
  937. daudio_used = 0
  938. daudio_master = 4
  939. daudio_select = 1
  940. audio_format = 1
  941. signal_inversion = 1
  942. mclk_fs = 128
  943. sample_resolution = 16
  944. slot_width_select = 32
  945. ;pcm_sync_period = 256
  946. pcm_lrck_period = 32
  947. pcm_lrckr_period = 1
  948. msb_lsb_first = 0
  949. sign_extend = 0
  950. slot_index = 0
  951. slot_width = 32
  952. frame_width = 0
  953. tx_data_mode = 0
  954. rx_data_mode = 0
  955. i2s_mclk = port:PG10<2><1><default><default>
  956. i2s_bclk = port:PG11<2><1><default><default>
  957. i2s_dout0 = port:PG12<2><1><default><default>
  958. i2s_din = port:PG13<2><1><default><default>
  959.  
  960.  
  961. [audio0]
  962. audio_used = 1
  963. lineout_vol = 0x1f
  964. cap_vol = 0x5
  965. audio_hp_ldo = none
  966. adcagc_used = 0
  967. adcdrc_used = 0
  968. dacdrc_used = 0
  969. adchpf_used = 0
  970. dachpf_used = 0
  971. audio_pa_ctrl = port:PA16<1><default><default><0>
  972.  
  973. [spdif0]
  974. spdif_used = 1
  975. spdif_dout = port:PA17<2><1><default><default>
  976.  
  977. [audiohub]
  978. hub_used = 0
  979. codec_used = 1
  980. spdif_used = 1
  981. hdmi_used = 1
  982.  
  983. ;----------------------------------------------------------------------------------
  984. ;ir rx --- infra remote configuration
  985. ;----------------------------------------------------------------------------------
  986. [s_cir0]
  987. ir_used = 1
  988. ir_rx = port:PL11<2><1><default><default>
  989. ir_power_key_code0 = 0x57
  990. ir_addr_code0 = 0x9f00
  991. ir_power_key_code1 = 0x1a
  992. ir_addr_code1 = 0xfb04
  993. ir_power_key_code2 = 0x14
  994. ir_addr_code2 = 0x7F80
  995. ir_power_key_code3 = 0x15
  996. ir_addr_code3 = 0x7F80
  997. ir_power_key_code4 = 0x0b
  998. ir_addr_code4 = 0xF708
  999. ir_power_key_code5 = 0x03
  1000. ir_addr_code5 = 0x00EF
  1001. ir_power_key_code6 = 0x9f
  1002. ir_addr_code6 = 0x4CB3
  1003. ir_power_key_code7 = 0x0a
  1004. ir_addr_code7 = 0x7748
  1005. ir_power_key_code8 = 0x45
  1006. ir_addr_code8 = 0xbd02
  1007. ir_power_key_code9 = 0x4d
  1008. ir_addr_code9 = 0xde21
  1009. ir_power_key_code10 = 0x18
  1010. ir_addr_code10 = 0xfe01
  1011. ir_power_key_code11 = 0x57
  1012. ir_addr_code11 = 0xff00
  1013. ir_power_key_code12 = 0x4d
  1014. ir_addr_code12 = 0xff40
  1015. ir_power_key_code13 = 0x88
  1016. ir_addr_code13 = 0xdd22
  1017.  
  1018.  
  1019. ;----------------------------------------------------------------------------------
  1020. ;ir tx--- infra remote configuration
  1021. ;----------------------------------------------------------------------------------
  1022. [cir]
  1023. ir_used = 0
  1024. ir_tx = port:PH07<2><default><default><default>
  1025.  
  1026.  
  1027. ;----------------------------------------------------------------------------------
  1028. ; dvfs voltage-frequency table configuration
  1029. ;
  1030. ; pmuic_type:0:none, 1:gpio, 2:i2c
  1031. ; pmu_gpio0: gpio config.
  1032. ; pmu_levelx: 0~9999: voltage(mV), 10000~90000:gpio0 state. voltage form high to low.
  1033. ;
  1034. ; extremity_freq(Hz): cpu extremity frequency when run benckmark or demo apk
  1035. ; 1536MHz@1500mV with radiator, 1296MHz@1340mV without radiator
  1036. ; max_freq: cpu maximum frequency, based on Hz, can not be more than 1200MHz
  1037. ; min_freq: cpu minimum frequency, based on Hz, can not be less than 60MHz
  1038. ;
  1039. ; LV_count: count of LV_freq/LV_volt, must be < 16
  1040. ;
  1041. ; LV1: core vdd is 1.50v if cpu frequency is (1296Mhz, 1536Mhz]
  1042. ; LV2: core vdd is 1.34v if cpu frequency is (1200Mhz, 1296Mhz]
  1043. ; LV3: core vdd is 1.32v if cpu frequency is (1008Mhz, 1200Mhz]
  1044. ; LV4: core vdd is 1.20v if cpu frequency is (816Mhz, 1008Mhz]
  1045. ; LV5: core vdd is 1.10v if cpu frequency is (648Mhz, 816Mhz]
  1046. ; LV6: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
  1047. ; LV7: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
  1048. ; LV8: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
  1049. ;
  1050. ;----------------------------------------------------------------------------------
  1051. [dvfs_table]
  1052. pmuic_type = 0
  1053. pmu_gpio0 = port:PL06<1><1><2><1>
  1054. pmu_level0 = 11300
  1055. pmu_level1 = 01100
  1056. ;extremity_freq = 1344000000
  1057. max_freq = 1008000000
  1058. min_freq = 480000000
  1059. boot_freq = 1008000000
  1060. LV_count = 8
  1061.  
  1062. LV1_freq = 1200000000
  1063. LV1_volt = 1300
  1064.  
  1065. LV2_freq = 1008000000
  1066. LV2_volt = 1200
  1067.  
  1068. LV3_freq = 0
  1069. LV3_volt = 1100
  1070.  
  1071. LV4_freq = 0
  1072. LV4_volt = 1100
  1073.  
  1074. LV5_freq = 0
  1075. LV5_volt = 1100
  1076.  
  1077. LV6_freq = 0
  1078. LV6_volt = 1100
  1079.  
  1080. LV7_freq = 0
  1081. LV7_volt = 1100
  1082.  
  1083. LV8_freq = 0
  1084. LV8_volt = 1100
  1085.  
  1086. [gpu_dvfs_table]
  1087.  
  1088. G_LV_count = 3
  1089.  
  1090. G_LV0_freq = 312000000
  1091. G_LV0_volt = 1200000
  1092.  
  1093. G_LV1_freq = 384000000
  1094. G_LV1_volt = 1200000
  1095.  
  1096. G_LV2_freq = 456000000
  1097. G_LV2_volt = 1200000
  1098.  
  1099. ;----------------------------------------------------------------------------------
  1100. ;special gpio config for Board Vendor ID
  1101. ;vid_used -- if board need distinguished by gpio,set '1';if not,set '0'
  1102. ;vid_count -- the count of vendor id bits
  1103. ;vid_bit_[0..3] -- gpio config for each bit of board vendor id
  1104. ;example: vendor id hex format :{0x 0 0 1 0 }
  1105. ; | | | |
  1106. ; [vid_bit_3] [vid_bit_2] [vid_bit_1] [vid_bit_0]
  1107. ;----------------------------------------------------------------------------------
  1108. [board_vendor]
  1109. vid_used = 1
  1110. vid_count = 6
  1111. vid_bit_0 = port:PD16<0><1><default><default>
  1112. vid_bit_1 = port:PD15<0><1><default><default>
  1113. vid_bit_2 = port:PD14<0><1><default><default>
  1114. vid_bit_3 = port:PD13<0><1><default><default>
  1115. vid_bit_4 = port:PD12<0><1><default><default>
  1116. vid_bit_5 = port:PD17<0><1><default><default>
  1117.  
  1118. ;----------------------------------------------------------------------------------
  1119. ;virtual device
  1120. ;virtual device for pinctrl testing
  1121. ;device have pin PA1 PA2
  1122. ;----------------------------------------------------------------------------------
  1123. [Vdevice]
  1124. Vdevice_used = 0
  1125. Vdevice_0 = port:PH10<5><1><2><default>
  1126. Vdevice_1 = port:PH11<5><1><2><default>
  1127.  
  1128. ;----------------------------------------------------------------------------------
  1129. ;s_uart0 config parameters
  1130. ;s_uart_used --s_uart0 whether used for arisc debugging
  1131. ;----------------------------------------------------------------------------------
  1132. [s_uart0]
  1133. s_uart_used = 0
  1134. s_uart_tx = port:PL02<2><default><default><default>
  1135. s_uart_rx = port:PL03<2><default><default><default>
  1136.  
  1137. ;----------------------------------------------------------------------------------
  1138. ;s_rsb0 config parameters
  1139. ;s_rsb_used --s_rsb0 whether used for arisc
  1140. ;----------------------------------------------------------------------------------
  1141. [s_rsb0]
  1142. s_rsb_used = 1
  1143. s_rsb_sck = port:PL00<2><1><2><default>
  1144. s_rsb_sda = port:PL01<2><1><2><default>
  1145.  
  1146. ;----------------------------------------------------------------------------------
  1147. ;s_jtag0 config parameters
  1148. ;s_jtag0_used --s_jtag0 whether used for arisc
  1149. ;
  1150. ;----------------------------------------------------------------------------------
  1151. [s_jtag0]
  1152. s_jtag_used = 0
  1153. s_jtag_tms = port:PL04<2><1><2><default>
  1154. s_jtag_tck = port:PL05<2><1><2><default>
  1155. s_jtag_tdo = port:PL06<2><1><2><default>
  1156. s_jtag_tdi = port:PL07<2><1><2><default>
  1157.  
  1158. ;----------------------------------------------------------------------------------
  1159. ;s_powchk cpus power check
  1160. ;s_powchk_used --power check whether used for arisc in super standby
  1161. ; bit31:enable power updat, bit1:wakeup when power state exception
  1162. ; bit0:wakeup when power consumption exception
  1163. ;s_power_reg the expected regs stand for power on/off state
  1164. ;s_system_power the limit maxmum power consumption when super standby (unit: mw)
  1165. ;
  1166. ;----------------------------------------------------------------------------------
  1167. [s_powchk]
  1168. s_powchk_used = 0x80000000
  1169. s_power_reg = 0x00000000
  1170. s_system_power = 50
  1171.  
  1172. ;----------------------------------------------------------------------------------
  1173. ;scr configuration
  1174. ;----------------------------------------------------------------------------------
  1175. [sim0]
  1176. scr_used = 0
  1177. scr_vccen = port:PA06<2><default><default><default>
  1178. scr_slk = port:PA07<2><default><default><default>
  1179. scr_sda = port:PA08<2><default><default><default>
  1180. scr_rst = port:PA09<2><default><default><default>
  1181. scr_det = port:PA10<2><default><default><default>
  1182.  
  1183.  
  1184. ;--------------------------------------------------------------------------------
  1185. ;tsc configuration
  1186. ;--------------------------------------------------------------------------------
  1187. [ts0]
  1188. tsc_used = 0
  1189. tsc_clk = port:PE00<3><default><default><default>
  1190. tsc_err = port:PE01<3><default><default><default>
  1191. tsc_sync = port:PE02<3><default><default><default>
  1192. tsc_dvld = port:PE03<3><default><default><default>
  1193. tsc_d0 = port:PE04<3><default><default><default>
  1194. tsc_d1 = port:PE05<3><default><default><default>
  1195. tsc_d2 = port:PE06<3><default><default><default>
  1196. tsc_d3 = port:PE07<3><default><default><default>
  1197. tsc_d4 = port:PE08<3><default><default><default>
  1198. tsc_d5 = port:PE09<3><default><default><default>
  1199. tsc_d6 = port:PE10<3><default><default><default>
  1200. tsc_d7 = port:PE11<3><default><default><default>
  1201.  
  1202. ;--------------------------------------------------------------------------------
  1203. ;gpio key
  1204. ;--------------------------------------------------------------------------------
  1205. [gpio_power_key]
  1206. key_used = 0
  1207. key_io = port:PL03<6><default><default><0>
  1208.  
  1209. ;----------------------------------------------------------------------------------
  1210. ; key para
  1211. ;
  1212. ; key_used --0:not used, 1:used
  1213. ; key_cnt --how many key button attach to keyadc.
  1214. ; key*_vol --the threshold of input voltage of key.
  1215. ;
  1216. ; For example: if key2_vol < $(keyadc value) < key3_vol, then key3 be reported.
  1217. ;----------------------------------------------------------------------------------
  1218. [key_para]
  1219. key_used = 0
  1220. key_cnt = 5
  1221. key1_vol = 222
  1222. key2_vol = 444
  1223. key3_vol = 666
  1224. key4_vol = 857
  1225. key5_vol = 2000
  1226.  
  1227.  
  1228. ;----------------------------------------------------------------------------------
  1229. ;display seven segment para
  1230. ;----------------------------------------------------------------------------------
  1231. [d7s_para]
  1232. d7s_used = 0
  1233. din_gpio = port:PD00<1><default><default><1>
  1234. clk_gpio = port:PD01<1><default><default><1>
  1235. stb_gpio = port:PD02<1><default><default><1>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!