Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@amsmart-elkpanels-online:~# smartctl -a /dev/sdb
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-48-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: SAMSUNG MZ7LN512HAJQ-00000
- Serial Number: S3TVNF0K401682
- LU WWN Device Id: 5 002538 d42ab3ac8
- Firmware Version: MVT0300Q
- User Capacity: 512,110,190,592 bytes [512 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Mon Jul 22 10:53:21 2019 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x53) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 265) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 4949
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 7
- 170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
- 171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
- 173 Unknown_Attribute 0x0033 063 063 005 Pre-fail Always - 461
- 174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 3
- 178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 1257
- 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0032 053 048 000 Old_age Always - 47
- 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 176
- 233 Media_Wearout_Indicator 0x0013 061 061 000 Pre-fail Always - 10331968
- 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 32624
- 242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 5377
- 249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 235754
- 250 Read_Error_Retry_Rate 0x0032 099 099 000 Old_age Always - 68419531005
- 251 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 494413182208
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 2977 -
- # 2 Short offline Completed without error 00% 1516 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- 255 0 65535 Read_scanning was never started
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement