Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
- [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
- [ 0.000000] [0: swapper: 0] Linux version 3.4.113-Deathly-1.0 (android@android-buildbox) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Nov 20 18:00:25 CST 2018
- [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] [0: swapper: 0] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] [0: swapper: 0] Machine: Samsung EXYNOS5420
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00600000@0xdf400000 for 'ion'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00100000@0xdf300000 for 'drm_mfc_sh'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00800000@0xdeb00000 for 'drm_g2d_wfd'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00002000@0xdeafe000 for 'bl_mem'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x0ce00000@0xd1c00000 for 'drm_video'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x01000000@0xd0c00000 for 'drm_mfc_input'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00200000@0xd0a00000 for 'drm_mfc_fw'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00100000@0xd0900000 for 'drm_sectbl'
- [ 0.000000] [0: swapper: 0] S5P/CMA: Reserved 0x00020000@0xd0800000 for 'drm_secdma'
- [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] [0: swapper: 0] CPU EXYNOS5420 (id 0xe5420020)
- [ 0.000000] [B0: swapper: 0] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] [B0: swapper: 0] clkout: bad source 0
- [ 0.000000] [B0: swapper: 0] s3c_register_clksrc: clock sclk_hsic_12m has no registers set
- [ 0.000000] [B0: swapper: 0] fout_ipll: source is ipll (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] mout_apll: source is fout_apll (1), rate is 800000000
- [ 0.000000] [B0: swapper: 0] mout_mpll: source is fout_mpll (1), rate is 532000000
- [ 0.000000] [B0: swapper: 0] mout_bpll: source is fout_bpll (1), rate is 800000000
- [ 0.000000] [B0: swapper: 0] sclk_bpll: source is ext_xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] mout_dpll: source is fout_dpll (1), rate is 600000000
- [ 0.000000] [B0: swapper: 0] mout_ipll: source is fout_ipll (1), rate is 432000000
- [ 0.000000] [B0: swapper: 0] mout_epll: source is fout_epll (1), rate is 100000000
- [ 0.000000] [B0: swapper: 0] mout_cpll: source is fout_cpll (1), rate is 666000000
- [ 0.000000] [B0: swapper: 0] mout_rpll: source is fout_rpll (1), rate is 266000000
- [ 0.000000] [B0: swapper: 0] mout_vpll: source is fout_vpll (1), rate is 350000000
- [ 0.000000] [B0: swapper: 0] mout_spll: source is fout_spll (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] mout_cpu: source is mout_apll (0), rate is 800000000
- [ 0.000000] [B0: swapper: 0] mout_hpm_cpu: source is mout_apll (0), rate is 800000000
- [ 0.000000] [B0: swapper: 0] mout_kpll: source is fout_kpll (1), rate is 600000000
- [ 0.000000] [B0: swapper: 0] mout_kfc: source is mout_kpll (0), rate is 600000000
- [ 0.000000] [B0: swapper: 0] mout_hpm_kfc: source is mout_kpll (0), rate is 600000000
- [ 0.000000] [B0: swapper: 0] mclk_cdrex: source is mout_bpll (0), rate is 800000000
- [ 0.000000] [B0: swapper: 0] aclk_200_fsys_dout: source is mout_dpll (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_fsys_sw: source is aclk_200_fsys_dout (0), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_fsys: source is aclk_200_fsys_sw (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] pclk_200_fsys_dout: source is mout_dpll (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] pclk_200_fsys_sw: source is pclk_200_fsys_dout (0), rate is 200000000
- [ 0.000000] [B0: swapper: 0] pclk_200_fsys: source is pclk_200_fsys_sw (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_100_noc_dout: source is mout_dpll (1), rate is 100000000
- [ 0.000000] [B0: swapper: 0] aclk_100_noc_sw: source is aclk_100_noc_dout (0), rate is 100000000
- [ 0.000000] [B0: swapper: 0] aclk_100_noc: source is aclk_100_noc_sw (1), rate is 100000000
- [ 0.000000] [B0: swapper: 0] aclk_400_wcore_mout: source is mout_mpll (2), rate is 532000000
- [ 0.000000] [B0: swapper: 0] aclk_400_wcore_dout: source is aclk_400_wcore_mout (0), rate is 532000000
- [ 0.000000] [B0: swapper: 0] aclk_400_wcore_sw: source is mout_spll (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_400_wcore: source is aclk_400_wcore_sw (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_200_fsys2_dout: source is mout_dpll (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_fsys2_sw: source is aclk_200_fsys2_dout (0), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_fsys2: source is aclk_200_fsys2_sw (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_dout: source is mout_dpll (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_sw: source is aclk_200_dout (0), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_200_disp1: source is aclk_200_sw (1), rate is 200000000
- [ 0.000000] [B0: swapper: 0] aclk_400_mscl_dout: source is mout_cpll (0), rate is 666000000
- [ 0.000000] [B0: swapper: 0] aclk_400_mscl_sw: source is mout_spll (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_400_mscl: source is aclk_400_mscl_sw (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_400_isp_dout: source is mout_cpll (0), rate is 666000000
- [ 0.000000] [B0: swapper: 0] aclk_400_isp_sw: source is mout_spll (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_400_isp: source is aclk_400_isp_sw (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_333_dout: source is mout_cpll (0), rate is 333000000
- [ 0.000000] [B0: swapper: 0] aclk_333_sw: source is aclk_333_dout (0), rate is 333000000
- [ 0.000000] [B0: swapper: 0] aclk_333: source is aclk_333_sw (1), rate is 333000000
- [ 0.000000] [B0: swapper: 0] aclk_166_dout: source is mout_cpll (0), rate is 166500000
- [ 0.000000] [B0: swapper: 0] aclk_166_sw: source is aclk_166_dout (0), rate is 166500000
- [ 0.000000] [B0: swapper: 0] aclk_166: source is aclk_166_sw (1), rate is 166500000
- [ 0.000000] [B0: swapper: 0] aclk_266_dout: source is mout_mpll (2), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_266_sw: source is aclk_266_dout (0), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_266: source is aclk_266_sw (1), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_266_isp: source is aclk_266_sw (1), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_66_dout: source is mout_cpll (0), rate is 66600000
- [ 0.000000] [B0: swapper: 0] aclk_66_sw: source is aclk_66_dout (0), rate is 66600000
- [ 0.000000] [B0: swapper: 0] aclk_66_peric: source is aclk_66_sw (1), rate is 66600000
- [ 0.000000] [B0: swapper: 0] aclk_66_psgen: source is aclk_66_sw (1), rate is 66600000
- [ 0.000000] [B0: swapper: 0] aclk_66_gpio: source is aclk_66_sw (0), rate is 66600000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_isp0_dout: source is mout_ipll (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_isp0_sw: source is aclk_333_432_isp0_dout (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_isp0: source is aclk_333_432_isp0_sw (1), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_isp_dout: source is mout_ipll (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_isp_sw: source is aclk_333_432_isp_dout (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_isp: source is aclk_333_432_isp_sw (1), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_gscl_dout: source is mout_ipll (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_gscl_sw: source is aclk_333_432_gscl_dout (0), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_333_432_gscl: source is aclk_333_432_gscl_sw (1), rate is 432000000
- [ 0.000000] [B0: swapper: 0] aclk_300_gscl_dout: source is mout_dpll (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_gscl_sw: source is aclk_300_gscl_dout (0), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_gscl: source is aclk_300_gscl_sw (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_disp1_dout: source is mout_dpll (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_disp1_sw: source is aclk_300_disp1_dout (0), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_disp1: source is aclk_300_disp1_sw (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_400_disp1_dout: source is mout_dpll (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_400_disp1_sw: source is mout_spll (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_400_disp1: source is aclk_400_disp1_sw (1), rate is 400000000
- [ 0.000000] [B0: swapper: 0] aclk_300_jpeg_dout: source is mout_dpll (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_jpeg_sw: source is aclk_300_jpeg_dout (0), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_300_jpeg: source is aclk_300_jpeg_sw (1), rate is 300000000
- [ 0.000000] [B0: swapper: 0] aclk_g3d_dout: source is mout_vpll (0), rate is 350000000
- [ 0.000000] [B0: swapper: 0] aclk_g3d_sw: source is aclk_g3d_dout (0), rate is 350000000
- [ 0.000000] [B0: swapper: 0] aclk_g3d: source is aclk_g3d_sw (1), rate is 350000000
- [ 0.000000] [B0: swapper: 0] aclk_266_g2d_dout: source is mout_mpll (2), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_266_g2d_sw: source is aclk_266_g2d_dout (0), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_266_g2d: source is aclk_266_g2d_sw (1), rate is 266000000
- [ 0.000000] [B0: swapper: 0] aclk_333_g2d_dout: source is mout_cpll (0), rate is 333000000
- [ 0.000000] [B0: swapper: 0] aclk_333_g2d_sw: source is aclk_333_g2d_dout (0), rate is 333000000
- [ 0.000000] [B0: swapper: 0] aclk_333_g2d: source is aclk_333_g2d_sw (1), rate is 333000000
- [ 0.000000] [B0: swapper: 0] mau_epll_clk: source is mout_epll (0), rate is 100000000
- [ 0.000000] [B0: swapper: 0] mx_mspll_ccore: source is mout_spll (3), rate is 400000000
- [ 0.000000] [B0: swapper: 0] mx_mspll_cpu: source is mout_spll (3), rate is 400000000
- [ 0.000000] [B0: swapper: 0] mx_mspll_kfc: source is mout_spll (3), rate is 400000000
- [ 0.000000] [B0: swapper: 0] mout_mdnie1: source is mout_mpll (3), rate is 532000000
- [ 0.000000] [B0: swapper: 0] mout_fimd1: source is mout_rpll (0), rate is 266000000
- [ 0.000000] [B0: swapper: 0] sclk_audio: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_pixel: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_spi0_isp: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_spi1_isp: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] dout_audio0: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] dout_audio1: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] dout_audio2: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] clkout: bad source 0
- [ 0.000000] [B0: swapper: 0] uclk1: source is mout_mpll (3), rate is 53200000
- [ 0.000000] [B0: swapper: 0] uclk1: source is mout_mpll (3), rate is 53200000
- [ 0.000000] [B0: swapper: 0] uclk1: source is mout_mpll (3), rate is 53200000
- [ 0.000000] [B0: swapper: 0] uclk1: source is mout_mpll (3), rate is 53200000
- [ 0.000000] [B0: swapper: 0] uclk1: source is mout_mpll (3), rate is 53200000
- [ 0.000000] [B0: swapper: 0] sclk_dwmci: source is mout_spll (4), rate is 200000000
- [ 0.000000] [B0: swapper: 0] sclk_dwmci: source is mout_spll (4), rate is 36363636
- [ 0.000000] [B0: swapper: 0] sclk_dwmci: source is mout_spll (4), rate is 200000000
- [ 0.000000] [B0: swapper: 0] sclk_fimd: source is mout_mdnie1 (1), rate is 266000000
- [ 0.000000] [B0: swapper: 0] sclk_mdnie_pwm1: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_usbdrd30: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_usbphy30: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_usbphy30: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_isp_sensor0: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_isp_sensor1: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_isp_sensor2: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_pwm_isp: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_uart_isp: source is xtal (0), rate is 24000000
- [ 0.000000] [B0: swapper: 0] sclk_pwm: source is mout_mpll (3), rate is 53200000
- [ 0.000000] [B0: swapper: 0] (sec_debug_set_upload_magic) 66262564
- [ 0.000000] [B0: swapper: 0] (sec_debug_set_upload_cause) cafebabe
- [ 0.000000] [B0: swapper: 0] Initialized persistent memory from 40000000-401fffff
- [ 0.000000] [B0: swapper: 0] sec_debug_magic_init: success reserving magic code area
- [ 0.000000] [B0: swapper: 0] PERCPU: Embedded 7 pages/cpu @c3976000 s15552 r0 d13120 u32768
- [ 0.000000] [B0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778764
- [ 0.000000] [B0: swapper: 0] Kernel command line: console=ram 2oglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x26000000 sec_tima_log=0x200000@0x26202000 sec_avc_log=0x40000@0x26404000 s3cfb.bootloaderfb=0x67000000 lcdtype=0 consoleblank=0 lpj=3977216 vmalloc=512m oops=panic pmic_info=75 cordon=d4c38ba13234577c3a9a98c2ddab8e40 connie=SM-T900_OPEN_EUR_58a4ac1d3785f545a77d59472ff946b3 androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=T900XXUBOH4 androidboot.selinux=enforcing androidboot.hardware=universal5420 androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=5205112d63d911d3 snd_soc_core.pmdown_time=1000
- [ 0.000000] [B0: swapper: 0] sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:1d7443f sec_log_buf:f7200000 sec_log_size:2097152
- [ 0.000000] [B0: swapper: 0] sec_log_save_old: saved old log at 131072@c3995100
- [ 0.000000] [B0: swapper: 0] sec_getlog_supply_kloginfo: 0xc6000000
- [ 0.000000] [B0: swapper: 0] tima :sec_tima_log_setup, base:26202000, size:200000
- [ 0.000000] [B0: swapper: 0] sec_avc_log_setup: *sec_avc_log_ptr:3dd04 sec_avc_log_buf:c6404000 sec_log_size:0x40000
- [ 0.000000] [B0: swapper: 0] ../../../../../../kernel/samsung/exynos5420/drivers/misc/max77888-muic.c get_if_pmic_inifo: switch_sel: b if_pmic_rev:4
- [ 0.000000] [B0: swapper: 0] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] [B0: swapper: 0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] [B0: swapper: 0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] [B0: swapper: 0] Memory: 3066MB = 3066MB total
- [ 0.000000] [B0: swapper: 0] Memory: 2840376k/2840376k available, 299208k reserved, 2382840K highmem
- [ 0.000000] [B0: swapper: 0] Virtual kernel memory layout:
- [ 0.000000] [B0: swapper: 0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] [B0: swapper: 0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] [B0: swapper: 0] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
- [ 0.000000] [B0: swapper: 0] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
- [ 0.000000] [B0: swapper: 0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] [B0: swapper: 0] .text : 0xc0008000 - 0xc0b42000 (11496 kB)
- [ 0.000000] [B0: swapper: 0] .init : 0xc0b42000 - 0xc0b99cc0 ( 352 kB)
- [ 0.000000] [B0: swapper: 0] .data : 0xc0b9a000 - 0xc0cd7da8 (1272 kB)
- [ 0.000000] [B0: swapper: 0] .bss : 0xc0d94050 - 0xc12c3cb0 (5312 kB)
- [ 0.000000] [B0: swapper: 0] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] [B0: swapper/0: 0] Preemptible hierarchical RCU implementation.
- [ 0.000000] [B0: swapper/0: 0] NR_IRQS:855
- [ 0.000000] [B0: swapper/0: 0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000075] [B0: swapper/0: 0] Calibrating delay loop (skipped) preset value.. 1590.88 BogoMIPS (lpj=3977216)
- [ 0.000175] [B0: swapper/0: 0] pid_max: default: 32768 minimum: 301
- [ 0.000400] [B0: swapper/0: 0] Security Framework initialized
- [ 0.000485] [B0: swapper/0: 0] SELinux: Initializing.
- [ 0.000743] [B0: swapper/0: 0] Mount-cache hash table entries: 512
- [ 0.001773] [B0: swapper/0: 0] Initializing cgroup subsys debug
- [ 0.001838] [B0: swapper/0: 0] Initializing cgroup subsys cpuacct
- [ 0.001901] [B0: swapper/0: 0] Initializing cgroup subsys freezer
- [ 0.001999] [B0: swapper/0: 0] CPU: Testing write buffer coherency: ok
- [ 0.002238] [B0: swapper/0: 1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002357] [B0: swapper/0: 1] Setting up static identity map for 0x208bea18 - 0x208bea70
- [ 0.043603] [B1: swapper/1: 0] CPU1: Booted secondary processor
- [ 0.043682] [B1: swapper/1: 0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.063608] [B2: swapper/2: 0] CPU2: Booted secondary processor
- [ 0.063687] [B2: swapper/2: 0] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.083600] [B3: swapper/3: 0] CPU3: Booted secondary processor
- [ 0.083680] [B3: swapper/3: 0] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.083924] [B0: swapper/0: 1] Brought up 4 CPUs
- [ 0.083986] [B0: swapper/0: 1] SMP: Total of 4 processors activated (6363.54 BogoMIPS).
- [ 0.112089] [B0: swapper/0: 1] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
- [ 0.112868] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 166 to 173 on device: GPY7
- [ 0.112948] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 175 to 182 on device: GPX0
- [ 0.113024] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 184 to 191 on device: GPX1
- [ 0.113100] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 193 to 200 on device: GPX2
- [ 0.113174] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 202 to 209 on device: GPX3
- [ 0.113265] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 54 to 61 on device: GPC0
- [ 0.113340] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 63 to 70 on device: GPC1
- [ 0.113414] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 72 to 78 on device: GPC2
- [ 0.113487] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 80 to 83 on device: GPC3
- [ 0.113559] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 85 to 86 on device: GPC4
- [ 0.113632] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 88 to 95 on device: GPD1
- [ 0.113705] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 111 to 116 on device: GPY0
- [ 0.113784] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 118 to 121 on device: GPY1
- [ 0.113859] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 123 to 128 on device: GPY2
- [ 0.113932] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 130 to 137 on device: GPY3
- [ 0.114006] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 139 to 146 on device: GPY4
- [ 0.114080] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 148 to 155 on device: GPY5
- [ 0.114154] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 157 to 164 on device: GPY6
- [ 0.114238] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 211 to 218 on device: GPE0
- [ 0.114313] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 220 to 221 on device: GPE1
- [ 0.114387] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 223 to 228 on device: GPF0
- [ 0.114462] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 230 to 237 on device: GPF1
- [ 0.114535] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 239 to 246 on device: GPG0
- [ 0.114609] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 248 to 255 on device: GPG1
- [ 0.114683] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 257 to 258 on device: GPG2
- [ 0.114756] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 106 to 109 on device: GPJ4
- [ 0.114839] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
- [ 0.114912] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
- [ 0.114984] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 16 to 23 on device: GPA2
- [ 0.115057] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 25 to 29 on device: GPB0
- [ 0.115128] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 31 to 35 on device: GPB1
- [ 0.115201] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 37 to 40 on device: GPB2
- [ 0.115274] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 42 to 49 on device: GPB3
- [ 0.115346] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 51 to 52 on device: GPB4
- [ 0.115419] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 97 to 104 on device: GPH0
- [ 0.115498] [B0: swapper/0: 1] gpio: GPZ has no PM function
- [ 0.115557] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 260 to 266 on device: GPZ
- [ 0.116434] [B0: swapper/0: 1] dummy:
- [ 0.116938] [B0: swapper/0: 1] NET: Registered protocol family 16
- [ 0.123492] [B0: swapper/0: 1] Last reset was reset (RST_STAT=0x800)
- [ 0.131882] [B0: swapper/0: 1] [GPIO_DVS] secgpio_dvs_probe has been created!!!
- [ 0.132581] [B0: swapper/0: 1] [GPIO_DVS] secgpio_dvs_init has been initialized!!!
- [ 0.137641] [B0: swapper/0: 1] RPLL is on
- [ 0.137693] [B0: swapper/0: 1] RPLL is off
- [ 0.141516] [B0: swapper/0: 1] Registered chained gpio int handler for interrupt 110.
- [ 0.141636] [B0: swapper/0: 1] Registered interrupt support for gpio group 6.
- [ 0.144945] [B0: swapper/0: 1] bootloader fb located at 67000000-67F9FFFF
- [ 0.150877] [B0: swapper/0: 1] brcm_wlan_init: start
- [ 0.151005] [B0: swapper/0: 1] brcm_init_wlan_mem: WIFI MEM Allocated
- [ 0.151301] [B0: swapper/0: 1] exynos5_universal5420_sensor_init, is called
- [ 0.151842] [B0: swapper/0: 1] sii8240_cfg_gpio()
- [ 0.151904] [B0: swapper/0: 1] Registered chained gpio int handler for interrupt 78.
- [ 0.152019] [B0: swapper/0: 1] Registered interrupt support for gpio group 11.
- [ 0.152099] [B0: swapper/0: 1] [sii8240] exynos5_universal5410_mhl_init - done
- [ 0.152167] [B0: swapper/0: 1] [exynos5_universal5420_fpga_init] initialization start!
- [ 0.152259] [B0: swapper/0: 1] irda_device_init called!
- [ 0.152321] [B0: swapper/0: 1] irda_device_init complete
- [ 0.153024] [B0: swapper/0: 1] persistent_ram: found existing buffer, size 1864100, start 357224
- [ 5.591776] [B0: swapper/0: 1] console [ram0] enabled
- [ 5.593969] [B0: swapper/0: 1] gpio_init_done
- [ 5.594096] [B0: swapper/0: 1] [GPIO_DVS][check_gpio_status] state : init
- [ 5.595044] [B0: swapper/0: 1] [GPIO_DVS][check_gpio_status] --
- [ 5.595467] [B0: swapper/0: 1] CCI is not supportedS3C Power Management, Copyright 2004 Simtec Electronics
- [ 5.596780] [B0: swapper/0: 1] EPLL is on
- [ 5.597090] [B0: swapper/0: 1] PM DOMAIN : pd-mfc, Device : s5p-mfc-v6 Registered
- [ 5.597304] [B0: swapper/0: 1] PM DOMAIN : pd-mfc, Device : exynos-sysmmu.0 Registered
- [ 5.597574] [B0: swapper/0: 1] PM DOMAIN : pd-g3d, Device : mali.0 Registered
- [ 5.597779] [B0: swapper/0: 1] PM DOMAIN : pd-gscl, Device : exynos-sysmmu.12 Registered
- [ 5.597992] [B0: swapper/0: 1] PM DOMAIN : pd-gscl, Device : exynos-sysmmu.13 Registered
- [ 5.598205] [B0: swapper/0: 1] PM DOMAIN : pd-gscl, Device : exynos-sysmmu.21 Registered
- [ 5.598447] [B0: swapper/0: 1] PM DOMAIN : pd-gscaler0, Device : exynos-sysmmu.5 Registered
- [ 5.598664] [B0: swapper/0: 1] PM DOMAIN : pd-gscaler1, Device : exynos-sysmmu.6 Registered
- [ 5.598825] [B0: swapper/0: 1] PM DOMAIN : pd-gscaler0, Device : exynos-gsc.0 Registered
- [ 5.599043] [B0: swapper/0: 1] PM DOMAIN : pd-gscaler1, Device : exynos-gsc.1 Registered
- [ 5.599312] [B0: swapper/0: 1] PM DOMAIN : pd-fimd1, Device : exynos5-fb.1 Registered
- [ 5.599528] [B0: swapper/0: 1] PM DOMAIN : pd-fimd1, Device : exynos-sysmmu.11 Registered
- [ 5.599747] [B0: swapper/0: 1] PM DOMAIN : pd-fimd1, Device : exynos-sysmmu.30 Registered
- [ 5.599967] [B0: swapper/0: 1] PM DOMAIN : pd-mixer, Device : s5p-mixer Registered
- [ 5.600176] [B0: swapper/0: 1] PM DOMAIN : pd-mixer, Device : exynos-sysmmu.2 Registered
- [ 5.600389] [B0: swapper/0: 1] PM DOMAIN : pd-hdmi, Device : exynos5-hdmi Registered
- [ 5.600628] [B0: swapper/0: 1] PM DOMAIN : pd-dp, Device : s5p-dp Registered
- [ 5.600786] [B0: swapper/0: 1] PM DOMAIN : pd-maudio, Device : samsung-i2s.0 Registered
- [ 5.600998] [B0: swapper/0: 1] PM DOMAIN : pd-maudio, Device : samsung-rp Registered
- [ 5.601254] [B0: swapper/0: 1] PM DOMAIN : pd-mscl0, Device : exynos5-scaler.0 Registered
- [ 5.601469] [B0: swapper/0: 1] PM DOMAIN : pd-mscl0, Device : exynos-sysmmu.23 Registered
- [ 5.601683] [B0: swapper/0: 1] PM DOMAIN : pd-mscl0, Device : exynos-sysmmu.24 Registered
- [ 5.601835] [B0: swapper/0: 1] PM DOMAIN : pd-mscl1, Device : exynos5-scaler.1 Registered
- [ 5.601987] [B0: swapper/0: 1] PM DOMAIN : pd-mscl1, Device : exynos-sysmmu.25 Registered
- [ 5.602205] [B0: swapper/0: 1] PM DOMAIN : pd-mscl1, Device : exynos-sysmmu.26 Registered
- [ 5.602417] [B0: swapper/0: 1] PM DOMAIN : pd-mscl2, Device : exynos5-scaler.2 Registered
- [ 5.602659] [B0: swapper/0: 1] PM DOMAIN : pd-mscl2, Device : exynos-sysmmu.27 Registered
- [ 5.602874] [B0: swapper/0: 1] PM DOMAIN : pd-mscl2, Device : exynos-sysmmu.28 Registered
- [ 5.603080] [B0: swapper/0: 1] PM DOMAIN : pd-isp, Device : exynos5-fimc-is Registered
- [ 5.603293] [B0: swapper/0: 1] PM DOMAIN : pd-isp, Device : s3c64xx-spi.3 Registered
- [ 5.603546] [B0: swapper/0: 1] PM DOMAIN : platform_device has not platform bus
- [ 5.603760] [B0: swapper/0: 1] PM DOMAIN : pd-mipi-csis1, Device : s5p-mipi-csis.1 Registered
- [ 5.603987] [B0: swapper/0: 1] PM DOMAIN : pd-flite0, Device : exynos-fimc-lite.0 Registered
- [ 5.604147] [B0: swapper/0: 1] PM DOMAIN : pd-flite1, Device : exynos-fimc-lite.1 Registered
- [ 5.604371] [B0: swapper/0: 1] PM DOMAIN : pd-isp, Device : exynos-sysmmu.9 Registered
- [ 5.604584] [B0: swapper/0: 1] PM DOMAIN : pd-isp, Device : exynos-sysmmu.16 Registered
- [ 5.604802] [B0: swapper/0: 1] PM DOMAIN : pd-isp, Device : exynos-sysmmu.17 Registered
- [ 5.605418] [B0: swapper/0: 1] EXYNOS5420 PMU Initialize
- [ 5.606494] [B0: swapper/0: 1] EXYNOS: Initializing architecture
- [ 5.608294] [B0: swapper/0: 1] s3c24xx-pwm s3c24xx-pwm.0: tin at 66600000, tdiv at 66600000, tin=divclk, base 0
- [ 5.608626] [B0: swapper/0: 1] s3c24xx-pwm s3c24xx-pwm.1: tin at 33300000, tdiv at 33300000, tin=divclk, base 8
- [ 5.609099] [B0: swapper/0: 1] Switching to clocksource mct-frc
- [ 5.610441] [B0: swapper/0: 1] EXYNOS5420 : LOT ID is N6FF2
- [ 5.610636] [B0: swapper/0: 1] Exynos5420 ASV : Use Fusing Speed Group 4
- [ 5.610827] [B0: swapper/0: 1] Exynos5420 ASV : invalid IDS value
- [ 5.610958] [B0: swapper/0: 1] EXYNOS5420 ASV : N6FF2 IDS : 0 HPM : 0
- [ 5.611157] [B0: swapper/0: 1] VDD_ARM ASV group is 4
- [ 5.611283] [B0: swapper/0: 1] VDD_KFC ASV group is 4
- [ 5.611467] [B0: swapper/0: 1] VDD_INT ASV group is 4
- [ 5.611592] [B0: swapper/0: 1] VDD_MIF ASV group is 4
- [ 5.611777] [B0: swapper/0: 1] VDD_G3D ASV group is 4
- [ 5.614362] [B0: swapper/0: 1] ion_reserve: ion_chunk_heap reserved base c0800000 size 268435456
- [ 5.678614] [B0: swapper/0: 1] bio: create slab <bio-0> at 0
- [ 5.680215] [B0: swapper/0: 1] DC_5V: 5000 mV
- [ 6.295282] [B0: swapper/0: 1] ion_chunk_heap_create: base 3229614080 size 268435456 align 1048576
- [ 6.297452] [B0: swapper/0: 1] SCSI subsystem initialized
- [ 6.300629] [B0: swapper/0: 1] usbcore: registered new interface driver usbfs
- [ 6.301305] [B0: swapper/0: 1] usbcore: registered new interface driver hub
- [ 6.301807] [B0: swapper/0: 1] usbcore: registered new device driver usb
- [ 6.303671] [B0: swapper/0: 1] i2c-gpio i2c-gpio.18: using pins 28 (SDA) and 29 (SCL)
- [ 6.304881] [B0: swapper/0: 1] i2c-gpio i2c-gpio.24: using pins 20 (SDA) and 21 (SCL)
- [ 6.305443] [B0: swapper/0: 1] i2c-gpio i2c-gpio.25: using pins 13 (SDA) and 14 (SCL)
- [ 6.306892] [B0: swapper/0: 1] max77803_i2c_probe: device found: rev.0x4, ver.0x0
- [ 6.403325] [B0: swapper/0: 1] max77803-safeout max77803-safeout: max77803_pmic_probe
- [ 6.403538] [B0: swapper/0: 1] [../../../../../../kernel/samsung/exynos5420/drivers/regulator/max77803.c:465] pdata->num_regulators:3
- [ 6.403770] [B0: swapper/0: 1] [../../../../../../kernel/samsung/exynos5420/drivers/regulator/max77803.c:471] for in pdata->num_regulators:3
- [ 6.404341] [B0: swapper/0: 1] regulator regulator.2: func:max77803_reg_enable
- [ 6.404545] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_rid
- [ 6.404743] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_enable_register
- [ 6.405990] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_voltage
- [ 6.406192] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_rid
- [ 6.406390] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_voltage_register
- [ 6.407225] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_rid
- [ 6.407362] [B0: swapper/0: 1] regulator regulator.2: func:max77803_list_voltage_safeout
- [ 6.407569] [B0: swapper/0: 1] safeout1 range: at 4900 mV
- [ 6.407756] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_voltage
- [ 6.407956] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_rid
- [ 6.408093] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_voltage_register
- [ 6.408930] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_rid
- [ 6.409127] [B0: swapper/0: 1] regulator regulator.2: func:max77803_list_voltage_safeout
- [ 6.409475] [B0: swapper/0: 1] [../../../../../../kernel/samsung/exynos5420/drivers/regulator/max77803.c:471] for in pdata->num_regulators:3
- [ 6.410001] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_voltage
- [ 6.410144] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_rid
- [ 6.410342] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_voltage_register
- [ 6.411177] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_rid
- [ 6.411375] [B0: swapper/0: 1] regulator regulator.3: func:max77803_list_voltage_safeout
- [ 6.411519] [B0: swapper/0: 1] safeout2 range: at 4900 mV
- [ 6.411706] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_voltage
- [ 6.411907] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_rid
- [ 6.412043] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_voltage_register
- [ 6.412816] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_rid
- [ 6.413013] [B0: swapper/0: 1] regulator regulator.3: func:max77803_list_voltage_safeout
- [ 6.413303] [B0: swapper/0: 1] [../../../../../../kernel/samsung/exynos5420/drivers/regulator/max77803.c:471] for in pdata->num_regulators:3
- [ 6.413831] [B0: swapper/0: 1] regulator regulator.4: func:max77803_reg_enable
- [ 6.414037] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_rid
- [ 6.414174] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_enable_register
- [ 6.415522] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_voltage
- [ 6.415720] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_rid
- [ 6.415916] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_voltage_register
- [ 6.416689] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_rid
- [ 6.416887] [B0: swapper/0: 1] regulator regulator.4: func:max77803_list_voltage
- [ 6.417086] [B0: swapper/0: 1] CHARGER: 60 <--> 2580 mA at 380 mA
- [ 6.417735] [B0: swapper/0: 1] i2c-gpio i2c-gpio.17: using pins 48 (SDA) and 49 (SCL)
- [ 6.418914] [B0: swapper/0: 1] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 6.419117] [B0: swapper/0: 1] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 6.419359] [B0: swapper/0: 1] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
- [ 6.421144] [B0: swapper/0: 1] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 6.421287] [B0: swapper/0: 1] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 6.421485] [B0: swapper/0: 1] s3c-i2c s3c2440-i2c.3: bus frequency set to 378 KHz
- [ 6.422814] [B0: swapper/0: 1] max77802 7-0009: device found
- [ 6.422944] [B0: swapper/0: 1] max77802_irq_init+
- [ 6.423137] [B0: swapper/0: 1] max77802_irq_init: gpio_irq=1
- [ 6.428237] [B0: swapper/0: 1] max77802_irq_init-
- [ 6.434171] [B0: swapper/0: 1] vdd_mif range: 700 <--> 1300 mV at 1000 mV
- [ 6.435248] [B0: swapper/0: 1] vdd_arm range: 800 <--> 1500 mV at 1000 mV
- [ 6.436222] [B0: swapper/0: 1] vdd_int range: 800 <--> 1400 mV at 1025 mV
- [ 6.437251] [B0: swapper/0: 1] vdd_g3d range: 700 <--> 1400 mV at 1025 mV
- [ 6.438304] [B0: swapper/0: 1] vdd_kfc range: 800 <--> 1500 mV at 1000 mV
- [ 6.439483] [B0: swapper/0: 1] vmem2_1.2v_ap: 1200 mV
- [ 6.440687] [B0: swapper/0: 1] vcc_1.8v_ap: 1800 mV
- [ 6.441443] [B0: swapper/0: 1] vmmc2_2.8v_ap: 1800 <--> 2800 mV at 1800 mV
- [ 6.442668] [B0: swapper/0: 1] vhsic_1.8v_ap: 1800 mV
- [ 6.443883] [B0: swapper/0: 1] vxpll_1.8v_ap: 1800 mV
- [ 6.445078] [B0: swapper/0: 1] vmipi_1.0v_ap: 1000 mV
- [ 6.446287] [B0: swapper/0: 1] vadc_1.8v: 1800 mV
- [ 6.447440] [B0: swapper/0: 1] vmipi_1.8v_ap: 1800 mV
- [ 6.448649] [B0: swapper/0: 1] vddq_pre_1.8v: 1800 mV
- [ 6.449853] [B0: swapper/0: 1] vuotg_3.0v_ap: 3000 mV
- [ 6.451076] [B0: swapper/0: 1] vabb1_1.8v_ap: 1800 mV
- [ 6.452238] [B0: swapper/0: 1] vhsic_1.0v_ap: 1000 mV
- [ 6.453449] [B0: swapper/0: 1] vg3ds_1.0v_ap: 1000 mV
- [ 6.454422] [B0: swapper/0: 1] cam_isp_sensor_io_1.8v: 1800 mV
- [ 6.455436] [B0: swapper/0: 1] vt_cam_1.8v: 1800 mV
- [ 6.456234] [B0: swapper/0: 1] key_led_3.3v: 2500 <--> 3300 mV at 2800 mV
- [ 6.457004] [B0: swapper/0: 1] cam_sensor_core_1.2v: 1050 <--> 1200 mV at 1500 mV
- [ 6.458020] [B0: swapper/0: 1] vcc_3.3v_mhl: 3300 mV
- [ 6.459028] [B0: swapper/0: 1] usb_3.0_drv_3.3v: 3300 mV
- [ 6.460039] [B0: swapper/0: 1] vsil_1.2a: 1200 mV
- [ 6.461045] [B0: swapper/0: 1] vcc_1.8v_mhl: 1800 mV
- [ 6.461995] [B0: swapper/0: 1] tsp_vdd_1.8v: 1800 mV
- [ 6.463219] [B0: swapper/0: 1] vmifs_1.0v_ap: 1000 mV
- [ 6.464420] [B0: swapper/0: 1] irled_3.3V: 3300 mV
- [ 6.465649] [B0: swapper/0: 1] vcc_2.8v_ap: 2800 mV
- [ 6.466801] [B0: swapper/0: 1] vcc_sensor_2.8v: 2800 mV
- [ 6.467582] [B0: swapper/0: 1] exynos5-i2c exynos5-hs-i2c.3: i2c-7: Exynos5 HS-I2C adapter
- [ 6.469780] [B0: swapper/0: 1] exynos5-i2c exynos5-hs-i2c.6: i2c-10: Exynos5 HS-I2C adapter
- [ 6.470197] [B0: swapper/0: 1] Linux media interface: v0.10
- [ 6.470648] [B0: swapper/0: 1] Linux video capture interface: v2.00
- [ 6.484505] [B0: swapper/0: 1] [SENSORS CORE] sensors_class_init
- [ 6.486029] [B0: swapper/0: 1] input: meta_event as /devices/virtual/input/input0
- [ 6.486509] [B0: swapper/0: 1] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 6.488126] [B0: swapper/0: 1] Bluetooth: Core ver 2.16
- [ 6.488508] [B0: swapper/0: 1] NET: Registered protocol family 31
- [ 6.488704] [B0: swapper/0: 1] Bluetooth: HCI device and connection manager initialized
- [ 6.488914] [B0: swapper/0: 1] Bluetooth: HCI socket layer initialized
- [ 6.489057] [B0: swapper/0: 1] Bluetooth: L2CAP socket layer initialized
- [ 6.489340] [B0: swapper/0: 1] Bluetooth: SCO socket layer initialized
- [ 6.490192] [B0: swapper/0: 1] regulatory is not upadted via queue_regulatory_request.
- [ 6.529461] [B0: swapper/0: 1] NET: Registered protocol family 2
- [ 6.536685] [B0: swapper/0: 1] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 6.537447] [B0: swapper/0: 1] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 6.538951] [B0: swapper/0: 1] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
- [ 6.540888] [B0: swapper/0: 1] TCP: Hash tables configured (established 65536 bind 65536)
- [ 6.541109] [B0: swapper/0: 1] TCP: reno registered
- [ 6.541241] [B0: swapper/0: 1] UDP hash table entries: 256 (order: 2, 16384 bytes)
- [ 6.541468] [B0: swapper/0: 1] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
- [ 6.542027] [B0: swapper/0: 1] NET: Registered protocol family 1
- [ 6.542509] [B0: swapper/0: 1] Trying to unpack rootfs image as initramfs...
- [ 6.622755] [B0: swapper/0: 1] Freeing initrd memory: 1388K
- [ 6.625988] [B1: swapper/0: 1] wake enabled for irq 529
- [ 6.628116] [B2: swapper/0: 1] gps_geofence_wake_init misc register, name gps_geofence_wake, irq 520, host req pin num 184
- [ 6.628659] I[B0: swapper/0: 0] gps_host_wake_isr GPS pin level[Low]
- [ 6.628733] [B2: swapper/0: 1] wake enabled for irq 520
- [ 6.628985] [B2: swapper/0: 1] s3c-adc samsung-adc-v5: operating without regulator "vdd" .
- [ 6.629354] [B2: swapper/0: 1] s3c-adc samsung-adc-v5: attached adc driver
- [ 6.631155] [B2: swapper/0: 1] audit: initializing netlink socket (enabled)
- [ 6.632486] [B2: swapper/0: 1] highmem bounce pool size: 64 pages
- [ 6.652940] [B2: swapper/0: 1] [SDFAT] Filesystem version 2.0.8-lineage
- [ 6.656168] [B2: swapper/0: 1] Registering sdcardfs 0.1
- [ 6.657710] [B2: swapper/0: 1] NTFS driver 2.1.30 [Flags: R/W].
- [ 6.658633] [B2: swapper/0: 1] ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 6.659163] [B2: swapper/0: 1] fuse init (API version 7.18)
- [ 6.660880] [B2: swapper/0: 1] msgmni has been set to 896
- [ 6.664476] [B2: swapper/0: 1] io scheduler noop registered
- [ 6.664610] [B2: swapper/0: 1] io scheduler deadline registered
- [ 6.664841] [B2: swapper/0: 1] io scheduler cfq registered
- [ 6.665035] [B2: swapper/0: 1] io scheduler sio registered
- [ 6.665880] [B2: swapper/0: 1] io scheduler bfq registered (default)
- [ 6.666081] [B2: swapper/0: 1] BFQ I/O-scheduler: v7r8
- [ 6.666227] [B2: swapper/0: 1] io scheduler fiops registered
- [ 6.666487] [B2: swapper/0: 1] io scheduler zen registered
- [ 6.666618] [B2: swapper/0: 1] io scheduler fifo registered
- [ 6.666812] [B2: swapper/0: 1] io scheduler sioplus registered
- [ 6.667001] [B2: swapper/0: 1] io scheduler tripndroid registered
- [ 6.667133] [B2: swapper/0: 1] io scheduler vr registered
- [ 6.667322] [B2: swapper/0: 1] start plist test
- [ 6.671918] [B2: swapper/0: 1] end plist test
- [ 6.682900] [B2: swapper/0: 1] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 6.683120] [B2: swapper/0: 1] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 6.692853] [B2: swapper/0: 1] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 6.693010] [B2: swapper/0: 1] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 6.695831] [B2: swapper/0: 1] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 6.696048] [B2: swapper/0: 1] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 6.698195] [B2: swapper/0: 1] dma-pl330 dma-pl330.3: Loaded driver for PL330 DMAC-267056
- [ 6.698409] [B2: swapper/0: 1] dma-pl330 dma-pl330.3: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
- [ 6.700503] [B2: swapper/0: 1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 6.702949] [B2: swapper/0: 1] exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
- [ 6.703568] [B2: swapper/0: 1] exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
- [ 6.704103] [B2: swapper/0: 1] exynos4210-uart.2: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
- [ 6.704720] [B2: swapper/0: 1] exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
- [ 6.706515] [B2: swapper/0: 1] mali mali.0: Continuing without Mali clock control
- [ 6.707600] [B2: swapper/0: 1] G3D 600000Khz ASV is 1012500uV
- [ 6.707793] [B2: swapper/0: 1] G3D 533000Khz ASV is 987500uV
- [ 6.707921] [B2: swapper/0: 1] G3D 480000Khz ASV is 950000uV
- [ 6.708107] [B2: swapper/0: 1] G3D 420000Khz ASV is 912500uV
- [ 6.708234] [B2: swapper/0: 1] G3D 350000Khz ASV is 862500uV
- [ 6.708420] [B2: swapper/0: 1] G3D 266000Khz ASV is 812500uV
- [ 6.708608] [B2: swapper/0: 1] G3D 177000Khz ASV is 775000uV
- [ 6.708735] [B2: swapper/0: 1] G3D 100000Khz ASV is 775000uV
- [ 6.709397] [B2: swapper/0: 1] mali mali.0: GPU identified as 0x0620 r0p1 status 0
- [ 6.710579] [B1: swapper/0: 1] mali mali.0: Probed as mali0
- [ 6.764244] [B2: swapper/0: 1] brd: module loaded
- [ 6.772165] [B2: swapper/0: 1] loop: module loaded
- [ 6.772314] [B2: swapper/0: 1] func:max77803_muic_init
- [ 6.772504] [B2: swapper/0: 1] max77803_muic_init add notifier for full muic reg dump
- [ 6.772824] [B2: swapper/0: 1] func:max77803_muic_probe
- [ 6.773029] [B2: swapper/0: 1] max77803-muic max77803-muic: adc:837 chgtype:841, adc1k840
- [ 6.773634] [B2: swapper/0: 1] input: max77803-muic as /devices/platform/i2c-gpio.17/i2c-17/17-0066/max77803-muic/input/input1
- [ 6.773869] [B2: swapper/0: 1] max77803-muic max77803-muic: H/W rev connected UT1 UR2 pin to AP UART
- [ 6.774082] [B2: swapper/0: 1] max77803_muic_probe: switch_sel: b
- [ 6.774909] [B2: swapper/0: 1] max77803-muic max77803-muic: func:max77803_muic_set_adcdbset value:2
- [ 6.775126] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_set_adcdbset: ADCDBSET(0x02)
- [ 6.777087] [B2: swapper/0: 1] max77888_muic_adcmode_switch: no need to change the mode
- [ 6.777292] [B2: swapper/0: 1] func:max77888_store_init_reg_status
- [ 6.778597] [B2: swapper/0: 1] func:max77888_store_init_reg_status, reg 0x0a, val 0x2d
- [ 6.779922] [B2: swapper/0: 1] func:max77888_store_init_reg_status, reg 0x0c, val 0x09
- [ 6.781245] [B2: swapper/0: 1] func:max77888_store_init_reg_status, reg 0x0d, val 0x36
- [ 6.782559] [B2: swapper/0: 1] func:max77888_store_init_reg_status, reg 0x16, val 0xb2
- [ 6.782765] [B2: swapper/0: 1] max77803-muic max77803-muic: func:max77803_muic_irq_init
- [ 6.796248] [B2: swapper/0: 1] max77803-muic max77803-muic: adc:837 chgtype:841 adc1k:840 vbvolt:845
- [ 6.797096] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_irq_init: reg=7, val=9
- [ 6.797946] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_irq_init: reg=8, val=11
- [ 6.798791] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_irq_init: reg=9, val=0
- [ 6.799679] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_irq_init: reg=1, val=0
- [ 6.800520] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_irq_init: reg=2, val=0
- [ 6.801365] [B2: swapper/0: 1] max77803-muic max77803-muic: max77803_muic_irq_init: reg=3, val=0
- [ 6.809089] [B2: swapper/0: 1] LDO1: 1200 <--> 1800 mV at 1200 mV
- [ 6.820558] [B0: swapper/0: 1] arizona spi2.0: WM5102 revision C
- [ 6.838245] [B0: swapper/0: 1] MICVDD: 1700 <--> 3300 mV at 3000 mV
- [ 6.839502] [B0: swapper/0: 1] gpiochip_add: registered GPIOs 269 to 273 on device: arizona
- [ 6.842783] [B0: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6
- [ 6.842983] [B0: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 6.843473] [B0: swapper/0: 1] PPP generic driver version 2.4.2
- [ 6.844205] [B0: swapper/0: 1] PPP BSD Compression module registered
- [ 6.844394] [B0: swapper/0: 1] PPP Deflate Compression module registered
- [ 6.844973] [B0: swapper/0: 1] PPP MPPE Compression module registered
- [ 6.845175] [B0: swapper/0: 1] NET: Registered protocol family 24
- [ 6.845553] [B0: swapper/0: 1] usbcore: registered new interface driver catc
- [ 6.845984] [B0: swapper/0: 1] usbcore: registered new interface driver kaweth
- [ 6.846185] [B0: swapper/0: 1] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
- [ 6.846563] [B0: swapper/0: 1] usbcore: registered new interface driver pegasus
- [ 6.847010] [B0: swapper/0: 1] usbcore: registered new interface driver rtl8150
- [ 6.847444] [B0: swapper/0: 1] usbcore: registered new interface driver asix
- [ 6.847874] [B0: swapper/0: 1] usbcore: registered new interface driver cdc_ether
- [ 6.848254] [B0: swapper/0: 1] usbcore: registered new interface driver cdc_eem
- [ 6.848686] [B0: swapper/0: 1] usbcore: registered new interface driver dm9601
- [ 6.849120] [B0: swapper/0: 1] usbcore: registered new interface driver smsc75xx
- [ 6.849602] [B0: swapper/0: 1] usbcore: registered new interface driver smsc9500
- [ 6.849998] [B0: swapper/0: 1] usbcore: registered new interface driver gl620a
- [ 6.850438] [B0: swapper/0: 1] usbcore: registered new interface driver net1080
- [ 6.850874] [B0: swapper/0: 1] usbcore: registered new interface driver plusb
- [ 6.851306] [B0: swapper/0: 1] usbcore: registered new interface driver rndis_host
- [ 6.851684] [B0: swapper/0: 1] usbcore: registered new interface driver cdc_subset
- [ 6.852116] [B0: swapper/0: 1] usbcore: registered new interface driver zaurus
- [ 6.852551] [B0: swapper/0: 1] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 6.853007] [B0: swapper/0: 1] usbcore: registered new interface driver cdc_ncm
- [ 6.853439] [B0: swapper/0: 1] host_notifier host_notifier.0: notifier_probe
- [ 6.854445] [B0: swapper/0: 1] ovc_init
- [ 6.855110] [B0: swapper/0: 1] exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
- [ 6.855252] [B0: swapper/0: 1] exynos-drd exynos-dwc3.0: Release Number: 0x200a
- [ 6.856521] [B0: swapper/0: 1] exynos-drd exynos-dwc3.1: Core ID Number: 0x5533
- [ 6.856724] [B0: swapper/0: 1] exynos-drd exynos-dwc3.1: Release Number: 0x200a
- [ 6.856919] [B0: swapper/0: 1] exynos-drd exynos-dwc3.1: dummy
- [ 6.857459] [B0: swapper/0: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.858240] [B0: swapper/0: 1] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 6.858459] [B0: swapper/0: 1] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 6.858802] [B0: swapper/0: 1] s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
- [ 6.864355] [B0: swapper/0: 1] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- [ 6.864913] [B0: swapper/0: 1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 6.865122] [B0: swapper/0: 1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.865330] [B0: swapper/0: 1] usb usb1: Product: S5P EHCI Host Controller
- [ 6.865466] [B0: swapper/0: 1] usb usb1: Manufacturer: Linux 3.4.113-Deathly-1.0 ehci_hcd
- [ 6.865668] [B0: swapper/0: 1] usb usb1: SerialNumber: s5p-ehci
- [ 6.867020] [B0: swapper/0: 1] hub 1-0:1.0: USB hub found
- [ 6.867168] [B0: swapper/0: 1] hub 1-0:1.0: 3 ports detected
- [ 6.869013] [B0: swapper/0: 1] exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
- [ 6.869217] [B0: swapper/0: 1] exynos-drd exynos-dwc3.0: Release Number: 0x200a
- [ 6.869415] [B0: swapper/0: 1] exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
- [ 6.869636] [B0: swapper/0: 1] exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 2
- [ 6.870072] [B0: swapper/0: 1] exynos-xhci exynos-xhci.0: irq 104, io mem 0x12000000
- [ 6.870519] [B0: swapper/0: 1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 6.870726] [B0: swapper/0: 1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.870873] [B0: swapper/0: 1] usb usb2: Product: EXYNOS xHCI Host Controller
- [ 6.871069] [B0: swapper/0: 1] usb usb2: Manufacturer: Linux 3.4.113-Deathly-1.0 xhci_hcd
- [ 6.871271] [B0: swapper/0: 1] usb usb2: SerialNumber: exynos-xhci.0
- [ 6.872735] [B0: swapper/0: 1] hub 2-0:1.0: USB hub found
- [ 6.872883] [B0: swapper/0: 1] hub 2-0:1.0: 1 port detected
- [ 6.874093] [B0: swapper/0: 1] exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
- [ 6.874364] [B0: swapper/0: 1] exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 3
- [ 6.874922] [B0: swapper/0: 1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
- [ 6.875071] [B0: swapper/0: 1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 6.875281] [B0: swapper/0: 1] usb usb3: Product: EXYNOS xHCI Host Controller
- [ 6.875481] [B0: swapper/0: 1] usb usb3: Manufacturer: Linux 3.4.113-Deathly-1.0 xhci_hcd
- [ 6.875684] [B0: swapper/0: 1] usb usb3: SerialNumber: exynos-xhci.0
- [ 6.877101] [B0: swapper/0: 1] hub 3-0:1.0: USB hub found
- [ 6.877310] [B0: swapper/0: 1] hub 3-0:1.0: 1 port detected
- [ 6.878945] [B0: swapper/0: 1] usbcore: registered new interface driver usblp
- [ 6.879088] [B0: swapper/0: 1] Initializing USB Mass Storage driver...
- [ 6.879734] [B0: swapper/0: 1] usbcore: registered new interface driver usb-storage
- [ 6.879939] [B0: swapper/0: 1] USB Mass Storage support registered.
- [ 6.880583] [B0: swapper/0: 1] usbcore: registered new interface driver usbserial
- [ 6.880786] [B0: swapper/0: 1] usbserial: USB Serial Driver core
- [ 6.881217] [B0: swapper/0: 1] usbcore: registered new interface driver pl2303
- [ 6.881599] [B0: swapper/0: 1] USB Serial support registered for pl2303
- [ 6.882088] [B0: swapper/0: 1] exynos-ss-udc exynos-ss-udc.0: regs dfade000, irq 104
- [ 6.883921] [B0: swapper/0: 1] usb: android_probe pdata: de9becc0
- [ 6.884056] [B0: swapper/0: 1] usb: android_probe nluns=1
- [ 6.884858] [B0: swapper/0: 1] file system registered
- [ 6.888782] [B1: swapper/0: 1] gadget: Mass Storage Function, version: 2009/09/11
- [ 6.888929] [B1: swapper/0: 1] gadget: Number of LUNs=1
- [ 6.889120] [B1: swapper/0: 1] lun0: LUN: removable file: (no medium)
- [ 6.891841] [B1: swapper/0: 1] gadget: android_usb ready
- [ 6.891969] [B1: swapper/0: 1] exynos-ss-udc exynos-ss-udc.0: bound driver android_usb
- [ 6.893014] [B2: swapper/0: 1] mousedev: PS/2 mouse device common for all mice
- [ 6.895054] [B2: swapper/0: 1] usbcore: registered new interface driver xpad
- [ 6.895893] [B2: swapper/0: 1] input: sec_touchscreen as /devices/platform/s3c2440-i2c.0/i2c-0/0-004a/input/input2
- [ 7.129358] [B2: swapper/0: 1] Atmel MXT1664S 0-004a: tsp_atmel/mXT1664S_v2.fw
- [ 7.129569] [B2: swapper/0: 1] Atmel MXT1664S 0-004a: Firmware file consist of header, configuration, firmware
- [ 7.129789] [B2: swapper/0: 1] Atmel MXT1664S 0-004a: Firmware file has patch size: 6600
- [ 7.130523] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: family: 0xa2 variant: 0x0 version: 0x21 build: 0xaa matrix X,Y size: 32,52 number of obect: 32
- [ 7.131269] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: family: 0xa2 variant: 0x0 version: 0x21 build: 0xaa matrix X,Y size: 32,52 number of obect: 32
- [ 7.215197] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: Skip writing Config:[CRC 0xB6FF07]
- [ 7.215943] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: mxt_handle_T62_object: Setting T62 report disable.
- [ 7.585011] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: PTN CAL 1 RST 5 DST 100 DIF 100 CNT 40 JIT 5
- [ 7.585226] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: SUPP GAP 3*100ms CNT 10
- [ 7.586235] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Reset is ongoing
- [ 7.586373] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: RESET
- [ 7.586919] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: STOP TIMER[0]
- [ 7.587115] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: START STAGE 0
- [ 7.589738] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Normal mode
- [ 7.589935] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Current state is Battery mode
- [ 7.590134] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: T62 CHARGON Disable
- [ 7.603692] [B0: swapper/0: 1] Atmel MXT1664S 0-004a: Mxt touch controller initialized
- [ 7.605797] [B1: swapper/0: 1] max77802_rtc_probe
- [ 7.614490] [B1: swapper/0: 1] max77802-rtc max77802-rtc: max77802_rtc_init_reg: bypass init
- [ 7.614938] [B1: swapper/0: 1] max77802-rtc max77802-rtc: max77802_rtc_enable_wtsr: enable WTSR
- [ 7.634367] [B1: swapper/0: 1] max77802-rtc max77802-rtc: max77802_rtc_enable_smpl: enable SMPL
- [ 7.664622] [B1: swapper/0: 1] max77802_rtc_read_time: 112/0/3 1:44:3(2)
- [ 7.674618] [B1: swapper/0: 1] max77802_rtc_read_alarm: 100/0/1 0:0:0(0)
- [ 7.684620] [B1: swapper/0: 1] max77802_rtc_read_time: 112/0/3 1:44:3(2)
- [ 7.685124] [B1: swapper/0: 1] max77802-rtc max77802-rtc: rtc core: registered max77802-rtc as rtc0
- [ 7.685349] [B1: swapper/0: 1] max77802_irq_unmask: group=2, cur=0xfd
- [ 7.686165] [B1: swapper/0: 1] i2c /dev entries driver
- [ 7.689560] [B1: swapper/0: 1] lirc_dev: IR Remote Control driver registered, major 250
- [ 7.689772] [B1: swapper/0: 1] IR NEC protocol handler initialized
- [ 7.689966] [B1: swapper/0: 1] IR RC5(x) protocol handler initialized
- [ 7.690162] [B1: swapper/0: 1] IR RC6 protocol handler initialized
- [ 7.690292] [B1: swapper/0: 1] IR JVC protocol handler initialized
- [ 7.690482] [B1: swapper/0: 1] IR Sony protocol handler initialized
- [ 7.690612] [B1: swapper/0: 1] IR RC5 (streamzap) protocol handler initialized
- [ 7.690809] [B1: swapper/0: 1] IR SANYO protocol handler initialized
- [ 7.690999] [B1: swapper/0: 1] IR MCE Keyboard/mouse protocol handler initialized
- [ 7.691195] [B1: swapper/0: 1] IR LIRC bridge handler initialized
- [ 7.691322] [B1: swapper/0: 1] gspca_main: v2.14.0 registered
- [ 7.692221] [B1: swapper/0: 1] exynos-mdev.0: Media0[0xde36fc00] was registered successfully
- [ 7.692759] [B1: swapper/0: 1] exynos-mdev.1: Media1[0xde36f000] was registered successfully
- [ 7.693231] [B1: swapper/0: 1] exynos-mdev.2: Media2[0xde36ec00] was registered successfully
- [ 7.694065] [B1: swapper/0: 1] s5p-mipi-csis.1
- [ 7.694108] [B1: swapper/0: 1] : s5pcsis_probe : csis1 probe success
- [ 7.695315] [B1: swapper/0: 1] exynos-fimc-lite exynos-fimc-lite.0: IOVMM: IOVM SIZE = 0xd0000000 B, IOVMM from 0x10000000.
- [ 7.695634] [B1: swapper/0: 1] [INFO]flite_probe:2303: FIMC-LITE0 probe success
- [ 7.696585] [B1: swapper/0: 1] S5K6B2: sensor_probe : sensor driver probed success
- [ 7.696804] [B1: swapper/0: 1] exynos-mdev.1: Registered sensor subdevice S5K6B2
- [ 7.697133] [B1: swapper/0: 1] exynos-fimc-lite exynos-fimc-lite.1: IOVMM: IOVM SIZE = 0xd0000000 B, IOVMM from 0x10000000.
- [ 7.697378] [B1: swapper/0: 1] [INFO]flite_probe:2303: FIMC-LITE1 probe success
- [ 7.699336] [B1: swapper/0: 1] exynos-gsc exynos-gsc.0: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.699581] [B1: swapper/0: 1] exynos-gsc exynos-gsc.0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- [ 7.699811] [B1: swapper/0: 1] exynos-gsc exynos-gsc.0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- [ 7.700048] [B1: swapper/0: 1] exynos-gsc exynos-gsc.0: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- [ 7.700223] [B1: swapper/0: 1] exynos-gsc exynos-gsc.0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- [ 7.700452] [B1: swapper/0: 1] exynos-gsc exynos-gsc.0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 7.700697] [B1: swapper/0: 1] [INFO]gsc_probe:1608: gsc-0 registered successfully
- [ 7.702203] [B1: swapper/0: 1] exynos-gsc exynos-gsc.1: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.702445] [B1: swapper/0: 1] exynos-gsc exynos-gsc.1: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- [ 7.702677] [B1: swapper/0: 1] exynos-gsc exynos-gsc.1: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- [ 7.702914] [B1: swapper/0: 1] exynos-gsc exynos-gsc.1: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- [ 7.703150] [B1: swapper/0: 1] exynos-gsc exynos-gsc.1: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- [ 7.703378] [B1: swapper/0: 1] exynos-gsc exynos-gsc.1: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 7.703620] [B1: swapper/0: 1] [INFO]gsc_probe:1608: gsc-1 registered successfully
- [ 7.704234] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: ++sc_probe
- [ 7.704801] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.705046] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- [ 7.705280] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- [ 7.705524] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- [ 7.705763] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- [ 7.705996] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 7.706351] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: scaler version is 0x00000047
- [ 7.706896] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.0: scaler registered successfully
- [ 7.707264] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: ++sc_probe
- [ 7.707717] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.707962] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- [ 7.708195] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- [ 7.708435] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- [ 7.708675] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- [ 7.708907] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 7.709362] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: scaler version is 0x00000047
- [ 7.709837] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.1: scaler registered successfully
- [ 7.710203] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: ++sc_probe
- [ 7.710722] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.710969] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- [ 7.711206] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- [ 7.711447] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- [ 7.711690] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- [ 7.711924] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 7.712271] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: scaler version is 0x00000047
- [ 7.712795] [B1: swapper/0: 1] exynos5-scaler exynos5-scaler.2: scaler registered successfully
- [ 7.713476] [B1: swapper/0: 1] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
- [ 7.713797] [B1: swapper/0: 1] s5p-fimg2d s5p-fimg2d: ++fimg2d_probe
- [ 7.714168] [B1: swapper/0: 1] [fimg2d_clk_setup] fimg2d clk name: aclk_333_g2d clkrate: 333000000
- [ 7.714436] [B1: swapper/0: 1] [fimg2d_clk_setup] gate clk: fimg2d
- [ 7.714633] [B1: swapper/0: 1] [fimg2d_probe] enable runtime pm
- [ 7.715073] [B1: swapper/0: 1] s5p-fimg2d s5p-fimg2d: fimg2d registered successfully
- [ 7.715568] [B1: swapper/0: 1] EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
- [ 7.716662] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: decoder registered as /dev/video6
- [ 7.717176] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: encoder registered as /dev/video7
- [ 7.717691] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: secure decoder registered as /dev/video8
- [ 7.718155] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: secure encoder registered as /dev/video9
- [ 7.718601] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.718841] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
- [ 7.719067] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
- [ 7.719347] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
- [ 7.719585] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
- [ 7.719813] [B1: swapper/0: 1] s5p-mfc s5p-mfc-v6: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 7.720890] [B1: swapper/0: 1] i2c-core: driver [exynos_hdcp] using legacy suspend method
- [ 7.721098] [B1: swapper/0: 1] i2c-core: driver [exynos_hdcp] using legacy resume method
- [ 7.721273] [B1: swapper/0: 1] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
- [ 7.721783] [B1: swapper/0: 1] s5p-hdmi exynos5-hdmi: hdmi ip version = 3
- [ 7.722876] [B1: swapper/0: 1] s5p-hdmi exynos5-hdmi: Set HDMI phy power off
- [ 7.723089] [B1: swapper/0: 1] s5p-hdmi exynos5-hdmi: probe sucessful
- [ 7.723850] [B1: swapper/0: 1] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
- [ 7.724185] [B1: swapper/0: 1] s5p-mixer s5p-mixer: probe start: tv ip version(5S_0)
- [ 7.724711] [B1: swapper/0: 1] s5p-mixer s5p-mixer: resources acquired
- [ 7.724972] [B1: swapper/0: 1] s5p-mixer s5p-mixer: IOVMM: IOVM SIZE = 0x50000000 B, IOVMM from 0x10000000.
- [ 7.725227] [B1: swapper/0: 1] s5p-mixer s5p-mixer: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x60000000.
- [ 7.725478] [B1: swapper/0: 1] s5p-mixer s5p-mixer: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0xa0000000.
- [ 7.725726] [B1: swapper/0: 1] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
- [ 7.726316] [B1: swapper/0: 1] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
- [ 7.726791] [B1: swapper/0: 1] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
- [ 7.727333] [B1: swapper/0: 1] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
- [ 7.727861] [B1: swapper/0: 1] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
- [ 7.728075] [B1: swapper/0: 1] s5p-mixer s5p-mixer: mixer0 create links
- [ 7.728282] [B1: swapper/0: 1] s5p-mixer s5p-mixer: mixer1 create links
- [ 7.728429] [B1: swapper/0: 1] s5p-mixer s5p-mixer: mixer links are created successfully
- [ 7.728662] [B1: swapper/0: 1] s5p-mixer s5p-mixer: probe successful
- [ 7.729251] [B1: swapper/0: 1] fimc_is_probe
- [ 7.729766] [B1: swapper/0: 1] exynos5-fimc-is exynos5-fimc-is: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.730031] [B1: swapper/0: 1] exynos5-fimc-is exynos5-fimc-is: IOVMM: IOVM SIZE = 0x50000000 B, IOVMM from 0x50000000.
- [ 7.730273] [B1: swapper/0: 1] exynos5-fimc-is exynos5-fimc-is: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xa0000000.
- [ 7.730515] [B1: swapper/0: 1] exynos5-fimc-is exynos5-fimc-is: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xc0000000.
- [ 7.747869] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: JPEG driver is registered to /dev/video14
- [ 7.748334] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: JPEG driver is registered to /dev/video13
- [ 7.748620] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.748879] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: IOVMM: IOVM SIZE = 0x50000000 B, IOVMM from 0x50000000.
- [ 7.749181] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xa0000000.
- [ 7.749469] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xc0000000.
- [ 7.749750] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.0: jpeg-hx.0 registered successfully
- [ 7.750432] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: JPEG driver is registered to /dev/video12
- [ 7.750886] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: JPEG driver is registered to /dev/video11
- [ 7.751107] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 7.751436] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: IOVMM: IOVM SIZE = 0x50000000 B, IOVMM from 0x50000000.
- [ 7.751683] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xa0000000.
- [ 7.751924] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xc0000000.
- [ 7.752204] [B1: swapper/0: 1] exynos5-jpeg-hx exynos5-jpeg-hx.1: jpeg-hx.1 registered successfully
- [ 7.753059] [B1: swapper/0: 1] [MHL] sii8240_init was called
- [ 7.754616] [B1: swapper/0: 1] input: sii8240_rcp as /devices/virtual/input/input3
- [ 7.755499] [B1: swapper/0: 1] ***MHL probe is successful
- [ 7.758951] [B1: swapper/0: 1] Exynos: Kernel Thermal management registered
- [ 7.759501] [B1: swapper/0: 1] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
- [ 7.760230] [B1: swapper/0: 1] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
- [ 7.761487] [B1: swapper/0: 1] device-mapper: uevent: version 1.0.3
- [ 7.762361] [B1: swapper/0: 1] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 7.999870] [B1: swapper/0: 1] Atmel MXT1664S 0-004a: mxt_input_open
- [ 8.000452] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Reset is ongoing
- [ 8.000655] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: RESET
- [ 8.001176] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: STOP TIMER[0]
- [ 8.001312] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: START STAGE 0
- [ 8.002244] [B1: swapper/0: 1] cpuidle: using governor ladder
- [ 8.003151] [B1: swapper/0: 1] cpuidle: using governor menu
- [ 8.003690] [B1: swapper/0: 1] Synopsys Designware Multimedia Card Interface Driver
- [ 8.003940] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Normal mode
- [ 8.004111] [B1: swapper/0: 1] dw_mmc dw_mmc.0: Using internal DMA controller.
- [ 8.004388] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Current state is Battery mode
- [ 8.004560] [B1: swapper/0: 1] dw_mmc dw_mmc.0: no vmmc regulator found
- [ 8.004633] [B1: swapper/0: 1] dw_mmc dw_mmc.0: no vqmmc regulator found
- [ 8.004913] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: T62 CHARGON Disable
- [ 8.011333] [B1: kworker/1:0: 9] mmc_host mmc0: card inserted
- [ 8.011580] [B1: swapper/0: 1] dw_mmc dw_mmc.0: Version ID is 250a
- [ 8.011737] [B1: swapper/0: 1] dw_mmc dw_mmc.0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
- [ 8.012071] [B1: swapper/0: 1] dw_mmc dw_mmc.1: Using internal DMA controller.
- [ 8.012543] [B1: swapper/0: 1] dw_mmc dw_mmc.1: no vmmc regulator found
- [ 8.012749] [B1: swapper/0: 1] dw_mmc dw_mmc.1: no vqmmc regulator found
- [ 8.019529] [B1: swapper/0: 1] dw_mmc dw_mmc.1: Version ID is 250a
- [ 8.019728] [B1: swapper/0: 1] dw_mmc dw_mmc.1: DW MMC controller at irq 108, 64 bit host data width, 64 deep fifo
- [ 8.020040] [B1: swapper/0: 1] dw_mmc dw_mmc.2: Using internal DMA controller.
- [ 8.020459] [B1: swapper/0: 1] external MMC(SD) card on.
- [ 8.020601] [B1: swapper/0: 1] dw_mmc dw_mmc.2: no vmmc regulator found
- [ 8.020881] [B1: swapper/0: 1] dw_mmc dw_mmc.2: vqmmc regulator found
- [ 8.021828] [B1: swapper/0: 1] dw_mmc dw_mmc.2: success to request irq for card detect.
- [ 8.021913] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Calibration is on going !!
- [ 8.021981] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: CAL
- [ 8.022355] [B1: swapper/0: 1] wake enabled for irq 532
- [ 8.022407] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: STOP TIMER[0]
- [ 8.022467] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: START STAGE 0
- [ 8.022844] [B1: swapper/0: 1] dwmci2_init, external MMC(SD) card on.
- [ 8.023440] [B1: swapper/0: 1] set external MMC(SD) card off.
- [ 8.029913] [B1: kworker/1:0: 9] mmc_host mmc2: card inserted
- [ 8.030051] [B1: kworker/1:0: 9] set external MMC(SD) card on.
- [ 8.030258] [B1: swapper/0: 1] dw_mmc dw_mmc.2: Version ID is 250a
- [ 8.030453] [B1: swapper/0: 1] dw_mmc dw_mmc.2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
- [ 8.035035] [B1: swapper/0: 1] max77803_led_setup: leds-sec1, 0x3d
- [ 8.039362] [B3: kworker/u:1: 21] mmc_host mmc0: device is being hw reset
- [ 8.039607] I[B3: kworker/u:1: 21] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
- [ 8.040173] [B1: swapper/0: 1] max77803_led_setup: torch-sec1, 0x6
- [ 8.055869] [B2: swapper/0: 1] Successfully registered hid_synaptics_driver
- [ 8.056502] [B2: swapper/0: 1] usbcore: registered new interface driver usbhid
- [ 8.056705] [B2: swapper/0: 1] usbhid: USB HID core driver
- [ 8.058095] [B2: swapper/0: 1] ashmem: initialized
- [ 8.058498] [B2: swapper/0: 1] logger: created 2048K log 'log_main'
- [ 8.058966] [B2: swapper/0: 1] logger: created 256K log 'log_events'
- [ 8.059452] [B2: swapper/0: 1] logger: created 2048K log 'log_radio'
- [ 8.059924] [B2: swapper/0: 1] logger: created 256K log 'log_system'
- [ 8.060124] [B2: swapper/0: 1] sec_getlog_supply_loggerinfo: 0xc0dfbec8 0xc0ffbec8 0xc11fbec8 0xc123bec8
- [ 8.062167] [B2: swapper/0: 1] sec-fuelgauge 18-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
- [ 8.064997] [B2: swapper/0: 1] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
- [ 8.065315] [B2: kworker/2:1: 992] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
- [ 8.065809] [B2: swapper/0: 1] wake enabled for irq 525
- [ 8.072561] [B2: swapper/0: 1] func:max77803_charger_init
- [ 8.072979] [B2: swapper/0: 1] max77803_charger_probe: MAX77803 Charger driver probe
- [ 8.073316] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Normal mode
- [ 8.073508] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Current state is Battery mode
- [ 8.076814] [B2: swapper/0: 1] max77803_dump_reg
- [ 8.077639] [B2: swapper/0: 1] max77803: c: 0xb0(0x00)
- [ 8.078454] [B2: swapper/0: 1] max77803: c: 0xb1(0xff)
- [ 8.079208] [B2: swapper/0: 1] max77803: c: 0xb2(0x1c)
- [ 8.080073] [B2: swapper/0: 1] max77803: c: 0xb3(0x00)
- [ 8.080828] [B2: swapper/0: 1] max77803: c: 0xb4(0x31)
- [ 8.081642] [B2: swapper/0: 1] max77803: c: 0xb5(0x08)
- [ 8.082457] [B2: swapper/0: 1] max77803: c: 0xb6(0xb6)
- [ 8.083216] [B2: swapper/0: 1] max77803: c: 0xb7(0x05)
- [ 8.084033] [B2: swapper/0: 1] max77803: c: 0xb8(0x30)
- [ 8.084836] [B2: swapper/0: 1] max77803: c: 0xb9(0x8c)
- [ 8.085660] [B2: swapper/0: 1] max77803: c: 0xba(0x20)
- [ 8.086410] [B2: swapper/0: 1] max77803: c: 0xbb(0xd9)
- [ 8.087228] [B2: swapper/0: 1] max77803: c: 0xbc(0xd3)
- [ 8.087518] I[B0: kworker/u:1: 21] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 166500000Hz, actual 166500000HZ div = 1)
- [ 8.088006] [B2: swapper/0: 1] max77803: c: 0xbd(0x0c)
- [ 8.088900] [B2: swapper/0: 1] max77803: c: 0xbe(0x40)
- [ 8.088973] [B0: kworker/u:1: 21] dw_mmc dw_mmc.0: Tuning map: 0x 00001f1f mid: 1
- [ 8.089043] [B0: kworker/u:1: 21] dw_mmc dw_mmc.0: CLKSEL 0x 01020040
- [ 8.089252] I[B0: kworker/u:1: 21] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 52000000Hz, actual 41625000HZ div = 0)
- [ 8.089660] I[B0: kworker/u:1: 21] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 166500000Hz, actual 166500000HZ div = 1)
- [ 8.090071] [B0: kworker/u:1: 21] mmc0: new HS200-DDR MMC card at address 0001
- [ 8.090270] [B2: swapper/0: 1] max77803: c: 0xbf(0xbf)
- [ 8.090971] [B2: swapper/0: 1] max77803: c: 0xc0(0x13)
- [ 8.091146] [B1: kworker/u:1: 21] mmcblk0: mmc0:0001 BWBC3R 29.1 GiB
- [ 8.091441] [B1: kworker/u:1: 21] mmcblk0boot0: mmc0:0001 BWBC3R partition 1 4.00 MiB
- [ 8.091770] [B1: kworker/u:1: 21] mmcblk0boot1: mmc0:0001 BWBC3R partition 2 4.00 MiB
- [ 8.092006] [B2: swapper/0: 1] max77803: c: 0xc1(0x19)
- [ 8.092162] [B1: kworker/u:1: 21] mmcblk0rpmb: mmc0:0001 BWBC3R partition 3 4.00 MiB
- [ 8.092970] [B2: swapper/0: 1] max77803: c: 0xc2(0x2c)
- [ 8.093821] [B2: swapper/0: 1] max77803: c: 0xc3(0x04)
- [ 8.094639] [B2: swapper/0: 1] max77803: c: 0xc4(0xc4)
- [ 8.095474] [B2: swapper/0: 1] max77803: c: 0xc5(0xc5)
- [ 8.096249] [B2: swapper/0: 1] max77803_charger_probe: device found: ver.0x9
- [ 8.096740] [B2: kworker/u:1: 21] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
- [ 8.100780] [B2: swapper/0: 1] max77803_get_charger_state: CHG_DTLS : 0x 1
- [ 8.101660] [B2: swapper/0: 1] max77803_get_health_state: CHG_DTLS(0x3),
- [ 8.102523] [B2: swapper/0: 1] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 8.102690] [B2: swapper/0: 1] max77803_get_health_state: Fail to get psy (battery)
- [ 8.105566] [B2: swapper/0: 1] max77803_get_input_current: CHG_CNFG_09(0x13)
- [ 8.106876] [B1: kworker/u:1: 21] mmcblk0boot1: unknown partition table
- [ 8.107409] [B2: kworker/2:1: 992] max77803_get_charger_state: CHG_DTLS : 0x 1
- [ 8.108208] [B2: kworker/2:1: 992] max77803_get_health_state: CHG_DTLS(0x3),
- [ 8.108539] [B1: kworker/u:1: 21] mmcblk0boot0: unknown partition table
- [ 8.109064] [B2: kworker/2:1: 992] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 8.109214] [B2: kworker/2:1: 992] max77803_get_health_state: Fail to get psy (battery)
- [ 8.112009] [B2: kworker/2:1: 992] max77803_get_input_current: CHG_CNFG_09(0x13)
- [ 8.116447] [B2: swapper/0: 1] duty_ns=19120, period_ns=38240 (26150)
- [ 8.117214] [B2: swapper/0: 1] ##########################################################
- [ 8.117362] [B2: swapper/0: 1] [SENSOR]: bma280_probe - Probe Start!
- [ 8.117870] [B0: swapper/0: 1] [SENSOR]: bma280_probe - chip id success 0xfb
- [ 8.118433] [B1: swapper/0: 1] input: accelerometer_sensor as /devices/virtual/input/input4
- [ 8.120064] [B0: swapper/0: 1] [SENSOR]: bma280_set_bandwidth - change bandwidth 12
- [ 8.122557] [B0: swapper/0: 1] [SENSOR]: bma280_set_mode - change mode 2
- [ 8.122756] [B0: swapper/0: 1] [SENSOR]: bma280_probe - Probe done!(chip pos : 7)
- [ 8.123294] [B1: swapper/0: 1] [SENSOR]: bmg160_probe - Probe Start!
- [ 8.124094] [B1: swapper/0: 1] input: gyro_sensor as /devices/virtual/input/input5
- [ 8.126446] [B0: swapper/0: 1] [SENSOR]: bmg160_set_bw - change bandwidth 7
- [ 8.128542] [B0: swapper/0: 1] [SENSOR]: bmg160_probe - Probe done!(chip pos : 7)
- [ 8.129065] [B1: swapper/0: 1] [SENSOR]: ak09911c_probe - Probe Start!
- [ 8.130373] [B1: swapper/0: 1] input: magnetic_sensor as /devices/virtual/input/input6
- [ 8.131716] [B0: swapper/0: 1] [SENSOR]: ak09911c_read_fuserom - asa_x = 26, asa_y = 24, asa_z = 23
- [ 8.132112] [B0: swapper/0: 1] [SENSOR]: ak09911c_probe - Probe done!(chip pos : 5)
- [ 8.132688] [B1: swapper/0: 1] [SENSOR]: cm3323_probe - Probe Start!
- [ 8.133580] [B1: swapper/0: 1] input: light_sensor as /devices/virtual/input/input7
- [ 8.134493] [B1: swapper/0: 1] [SENSOR]: cm3323_probe - Probe done!
- [ 8.134997] [B1: swapper/0: 1] mckernelapi : Mobicore API module initialized!
- [ 8.135241] [B1: swapper/0: 1] mcdrvkmod mcd: MobiCore Driver, Build: Sun Sep 16 15:08:26 2018
- [ 8.135392] [B1: swapper/0: 1] mcdrvkmod mcd: MobiCore mcDrvModuleApi version is 1.1
- [ 8.137326] [B1: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio
- [ 8.139018] [B1: swapper/0: 1] LDO1: Failed to create debugfs directory
- [ 8.142937] [B1: swapper/0: 1] Samsung SRP driver, (c)2011 Samsung Electronics
- [ 8.144267] [B1: swapper/0: 1] exynos5_audio_set_mclk: mclk enable
- [ 8.145232] [B1: swapper/0: 1] samsung-i2s samsung-i2s.0: EPLL rate = 100000000
- [ 8.145320] I[B2: kworker/u:1: 21] mmc_host mmc2: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
- [ 8.145693] [B1: swapper/0: 1] samsung-i2s samsung-i2s.0: SRP rate = 100000000
- [ 8.145838] [B1: swapper/0: 1] samsung-i2s samsung-i2s.0: BUS rate = 50000000
- [ 8.146325] [B1: swapper/0: 1] EPLL is off
- [ 8.274244] I[B0: kworker/u:1: 21] mmc_host mmc2: Bus speed (slot 0) = 83250000Hz (slot req 100000000Hz, actual 83250000HZ div = 0)
- [ 8.275467] [B0: kworker/u:1: 21] dw_mmc dw_mmc.2: Tuning map: 0x 0000003f mid: 2
- [ 8.275614] [B0: kworker/u:1: 21] dw_mmc dw_mmc.2: CLKSEL 0x 03040002
- [ 8.275819] [B0: kworker/u:1: 21] mmc2: new ultra high speed SDR50 SDXC card at address 0001
- [ 8.276738] [B1: kworker/u:1: 21] mmcblk1: mmc2:0001 00000 58.5 GiB
- [ 8.278853] [B1: kworker/u:1: 21] mmcblk1: p1
- [ 8.338281] [B2: swapper/0: 1] EPLL is on
- [ 8.338987] [B2: swapper/0: 1] EPLL is off
- [ 8.514983] [B2: swapper/0: 1] asoc: wm5102-aif1 <-> samsung-i2s.0 mapping ok
- [ 8.515763] [B2: swapper/0: 1] asoc: wm5102-aif2 <-> adonisuniv.cp mapping ok
- [ 8.516377] [B2: swapper/0: 1] asoc: wm5102-aif3 <-> adonisuniv.bt mapping ok
- [ 8.517301] [B2: swapper/0: 1] asoc: wm5102-aif1 <-> samsung-i2s.4 mapping ok
- [ 8.518714] [B2: swapper/0: 1] wm5102-codec wm5102-codec: dapm: unknown pin RCV
- [ 8.518874] [B2: swapper/0: 1] wm5102-codec wm5102-codec: dapm: unknown pin VPS
- [ 8.519028] [B2: swapper/0: 1] wm5102-codec wm5102-codec: dapm: unknown pin SPK
- [ 8.519245] [B2: swapper/0: 1] wm5102-codec wm5102-codec: dapm: unknown pin HP
- [ 8.519905] [B2: swapper/0: 1] wm5102-codec wm5102-codec: adonisuniv_late_probe: Successfully created
- [ 8.524783] [B3: swapper/0: 1] GACT probability NOT on
- [ 8.524925] [B3: swapper/0: 1] Mirror/redirect action on
- [ 8.525120] [B3: swapper/0: 1] u32 classifier
- [ 8.525241] [B3: swapper/0: 1] Actions configured
- [ 8.525430] [B3: swapper/0: 1] Netfilter messages via NETLINK v0.30.
- [ 8.525632] [B3: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 8.526634] [B3: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink.
- [ 8.526879] [B3: swapper/0: 1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 8.527087] [B3: swapper/0: 1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 8.527738] [B3: swapper/0: 1] xt_time: kernel timezone is -0000
- [ 8.527957] [B3: swapper/0: 1] 939-23012-001-quicksec-vpnclient-for-android-3.5-4155-1a877303f36b-4155
- [ 8.528170] [B3: swapper/0: 1] vpnclient kernel spd loaded.
- [ 8.528809] [B3: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 8.529201] [B3: swapper/0: 1] arp_tables: (C) 2002 David S. Miller
- [ 8.529496] [B3: swapper/0: 1] TCP: bic registered
- [ 8.529620] [B3: swapper/0: 1] TCP: cubic registered
- [ 8.529803] [B3: swapper/0: 1] TCP: westwood registered
- [ 8.529926] [B3: swapper/0: 1] TCP: highspeed registered
- [ 8.530112] [B3: swapper/0: 1] TCP: hybla registered
- [ 8.530294] [B3: swapper/0: 1] TCP: htcp registered
- [ 8.530413] [B3: swapper/0: 1] TCP: vegas registered
- [ 8.530595] [B3: swapper/0: 1] TCP: veno registered
- [ 8.530715] [B3: swapper/0: 1] TCP: scalable registered
- [ 8.530898] [B3: swapper/0: 1] TCP: lp registered
- [ 8.531016] [B3: swapper/0: 1] TCP: yeah registered
- [ 8.531196] [B3: swapper/0: 1] TCP: illinois registered
- [ 8.531316] [B3: swapper/0: 1] Initializing XFRM netlink socket
- [ 8.533470] [B3: swapper/0: 1] NET: Registered protocol family 10
- [ 8.534686] [B3: swapper/0: 1] Mobile IPv6
- [ 8.534912] [B3: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 8.535311] [B3: swapper/0: 1] IPv6 over IPv4 tunneling driver
- [ 8.538092] [B3: swapper/0: 1] NET: Registered protocol family 17
- [ 8.538322] [B3: swapper/0: 1] NET: Registered protocol family 15
- [ 8.538457] [B3: swapper/0: 1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 8.539012] [B3: swapper/0: 1] NET: Registered protocol family 35
- [ 8.540196] [B3: swapper/0: 1] Registering SWP/SWPB emulation handler
- [ 8.540370] [B3: swapper/0: 1] SRAM ASV group [4] : MIF(950000), G3D(975000)
- [ 8.540567] [B3: swapper/0: 1] regulator get error : mif_sram
- [ 8.541204] [B3: swapper/0: 1] big.LITTLE switcher initializing
- [ 8.547213] [B0: swapper/0: 1] big.LITTLE switcher initialized
- [ 8.569614] [B0: swapper/0: 1] zswap: loading zswap
- [ 8.570075] [B0: swapper/0: 1] zswap: using lzo compressor
- [ 9.304373] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_init_detect
- [ 9.305230] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_detect_dev CONTROL1:9
- [ 9.306216] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_detect_dev irq:-1 ret:0
- [ 9.306432] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_detect_dev: STATUS1:0x3f, 2:0x41
- [ 9.306656] [B2: kworker/2:1: 992] max77803-muic max77803-muic: adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:24
- [ 9.306875] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_detect_dev: ATTACHED
- [ 9.307087] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_handle_attach st1:3f st2:41 cable_type:24
- [ 9.307312] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_attach_usb_type adc:1f cable_type:24
- [ 9.307531] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_attach_usb_type:USB
- [ 9.307678] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_set_charging_type force_disable:0
- [ 9.307907] [B2: kworker/2:1: 992] [BATT] CB enabled(1), prev_cable(0)
- [ 9.308108] [B2: kworker/2:1: 992] max77803_muic_charger_cb: fail to get battery/ps psy
- [ 9.308310] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_set_usb_path path:0
- [ 9.308637] [B2: kworker/2:1: 992] regulator regulator.2: func:max77803_reg_is_enabled
- [ 9.308779] [B2: kworker/2:1: 992] regulator regulator.2: func:max77803_get_rid
- [ 9.308976] [B2: kworker/2:1: 992] regulator regulator.2: func:max77803_get_enable_register
- [ 9.310035] [B2: kworker/2:1: 992] regulator regulator.3: func:max77803_reg_is_enabled
- [ 9.310238] [B2: kworker/2:1: 992] regulator regulator.3: func:max77803_get_rid
- [ 9.310374] [B2: kworker/2:1: 992] regulator regulator.3: func:max77803_get_enable_register
- [ 9.311297] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_set_usb_path: AP_USB_MODE
- [ 9.311512] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_set_usb_path: Set manual path
- [ 9.314614] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_set_usb_path: CNTL1(0x09)
- [ 9.315460] [B2: kworker/2:1: 992] max77803-muic max77803-muic: max77803_muic_set_usb_path: CNTL2(0x36)
- [ 9.504368] [B2: kworker/2:1: 992] Atmel MXT1664S 0-004a: charging mode
- [ 9.504505] [B2: kworker/2:1: 992] Atmel MXT1664S 0-004a: Current state is Charging mode
- [ 9.504707] [B2: kworker/2:1: 992] Atmel MXT1664S 0-004a: T62 CHARGON Enable
- [ 9.520042] [B3: kworker/3:1: 991] s5p-ehci s5p-ehci: host_phy_susp
- [ 9.521977] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Calibration is on going !!
- [ 9.522126] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: CAL
- [ 9.522636] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: STOP TIMER[0]
- [ 9.522832] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: PATCH: START STAGE 0
- [ 9.533100] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Normal mode
- [ 9.533298] [B2: irq/544-Atmel M: 1103] Atmel MXT1664S 0-004a: Current state is Charging mode
- [ 10.228683] [B0: swapper/0: 1] UKSM: relative memcmp_cost = 2365 hash=3771348144 cmp_ret=0.
- [ 10.234081] [B0: swapper/0: 1] mdnie mdnie: registered successfully
- [ 10.234841] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: PSR mode is 1(0: VIDEO, 1: DP, 2: MIPI)
- [ 10.235828] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: all clocks are ready!
- [ 10.236143] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
- [ 10.236400] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x50000000.
- [ 10.236584] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x90000000.
- [ 10.236809] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xc0000000.
- [ 10.237043] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
- [ 10.260290] [B0: swapper/0: 1] mdnie mdnie: std_ui
- [ 10.305290] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: pm_stay_awake
- [ 10.305429] [B0: swapper/0: 1] s3c-fb exynos5-fb.1: window 0: fb
- [ 10.307361] [B0: swapper/0: 1] usb_3.0_drv_3.3v: incomplete constraints, leaving on
- [ 10.308173] [B0: swapper/0: 1] regulator regulator.4: func:max77803_reg_is_enabled
- [ 10.308377] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_rid
- [ 10.308515] [B0: swapper/0: 1] regulator regulator.4: func:max77803_get_enable_register
- [ 10.309406] [B0: swapper/0: 1] CHARGER: incomplete constraints, leaving on
- [ 10.309604] [B0: swapper/0: 1] regulator regulator.3: func:max77803_reg_is_enabled
- [ 10.309809] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_rid
- [ 10.309947] [B0: swapper/0: 1] regulator regulator.3: func:max77803_get_enable_register
- [ 10.310784] [B0: swapper/0: 1] regulator regulator.2: func:max77803_reg_is_enabled
- [ 10.310991] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_rid
- [ 10.311185] [B0: swapper/0: 1] regulator regulator.2: func:max77803_get_enable_register
- [ 10.311961] [B0: swapper/0: 1] safeout1 range: incomplete constraints, leaving on
- [ 10.313594] [B0: swapper/0: 1] init_hall_ic_irq : success
- [ 10.314238] [B0: swapper/0: 1] input: gpio-keys as /devices/platform/gpio-keys.0/input/input8
- [ 10.316045] [B0: swapper/0: 1] input_booster input_booster.0: input_booster_init_dvfs: HOMEPAGE is registered and intialized for key dvfs
- [ 10.316604] [B0: swapper/0: 1] input_booster input_booster.0: input_booster_init_dvfs: MENU is registered and intialized for touchkey dvfs
- [ 10.316844] [B0: swapper/0: 1] input_booster input_booster.0: input_booster_init_dvfs: device touchkey type is is already initialized [key = BACK]
- [ 10.317412] [B0: swapper/0: 1] input_booster input_booster.0: input_booster_init_dvfs: TOUCH is registered and intialized for touch dvfs
- [ 10.324603] [B0: swapper/0: 1] max77802_rtc_read_time: 112/0/3 1:44:6(2)
- [ 10.324876] [B0: swapper/0: 1] max77802-rtc max77802-rtc: setting system clock to 2012-01-03 01:44:06 UTC (1325555046)
- [ 10.325107] [B0: swapper/0: 1] CPUFREQ of CA7 L0 : 1312500 uV
- [ 10.325301] [B0: swapper/0: 1] CPUFREQ of CA7 L1 : 1312500 uV
- [ 10.325429] [B0: swapper/0: 1] CPUFREQ of CA7 L2 : 1200000 uV
- [ 10.325616] [B0: swapper/0: 1] CPUFREQ of CA7 L3 : 1212500 uV
- [ 10.325749] [B0: swapper/0: 1] CPUFREQ of CA7 L4 : 1150000 uV
- [ 10.325939] [B0: swapper/0: 1] CPUFREQ of CA7 L5 : 1100000 uV
- [ 10.326126] [B0: swapper/0: 1] CPUFREQ of CA7 L6 : 1050000 uV
- [ 10.326258] [B0: swapper/0: 1] CPUFREQ of CA7 L7 : 1012500 uV
- [ 10.326450] [B0: swapper/0: 1] CPUFREQ of CA7 L8 : 975000 uV
- [ 10.326575] [B0: swapper/0: 1] CPUFREQ of CA7 L9 : 937500 uV
- [ 10.326765] [B0: swapper/0: 1] CPUFREQ of CA7 L10 : 900000 uV
- [ 10.326955] [B0: swapper/0: 1] CPUFREQ of CA7 L11 : 900000 uV
- [ 10.327081] [B0: swapper/0: 1] CPUFREQ of CA7 L12 : 900000 uV
- [ 10.327269] [B0: swapper/0: 1] CPUFREQ of CA7 L13 : 900000 uV
- [ 10.327402] [B0: swapper/0: 1] CPUFREQ of CA7 L14 : 900000 uV
- [ 10.327734] [B0: swapper/0: 1] CPUFREQ of CA15 L0 : 1362500 uV
- [ 10.327923] [B0: swapper/0: 1] CPUFREQ of CA15 L1 : 1362500 uV
- [ 10.328057] [B0: swapper/0: 1] CPUFREQ of CA15 L2 : 1362500 uV
- [ 10.328244] [B0: swapper/0: 1] CPUFREQ of CA15 L3 : 1325000 uV
- [ 10.328370] [B0: swapper/0: 1] CPUFREQ of CA15 L4 : 1275000 uV
- [ 10.328562] [B0: swapper/0: 1] CPUFREQ of CA15 L5 : 1225000 uV
- [ 10.328750] [B0: swapper/0: 1] CPUFREQ of CA15 L6 : 1175000 uV
- [ 10.328875] [B0: swapper/0: 1] CPUFREQ of CA15 L7 : 1137500 uV
- [ 10.329067] [B0: swapper/0: 1] CPUFREQ of CA15 L8 : 1100000 uV
- [ 10.329197] [B0: swapper/0: 1] CPUFREQ of CA15 L9 : 1062500 uV
- [ 10.329427] [B0: swapper/0: 1] CPUFREQ of CA15 L10 : 1037500 uV
- [ 10.329622] [B0: swapper/0: 1] CPUFREQ of CA15 L11 : 1012500 uV
- [ 10.329754] [B0: swapper/0: 1] CPUFREQ of CA15 L12 : 987500 uV
- [ 10.329940] [B0: swapper/0: 1] CPUFREQ of CA15 L13 : 962500 uV
- [ 10.330070] [B0: swapper/0: 1] CPUFREQ of CA15 L14 : 937500 uV
- [ 10.330263] [B0: swapper/0: 1] CPUFREQ of CA15 L15 : 912500 uV
- [ 10.330449] [B0: swapper/0: 1] CPUFREQ of CA15 L16 : 900000 uV
- [ 10.330579] [B0: swapper/0: 1] CPUFREQ of CA15 L17 : 900000 uV
- [ 10.330772] [B0: swapper/0: 1] CPUFREQ of CA15 L18 : 900000 uV
- [ 10.330899] [B0: swapper/0: 1] CPUFREQ of CA15 L19 : 900000 uV
- [ 10.331086] [B0: swapper/0: 1] CPUFREQ of CA15 L20 : 900000 uV
- [ 10.331281] [B0: swapper/0: 1] CPUFREQ of CA15 L21 : 900000 uV
- [ 10.331409] [B0: swapper/0: 1] CPUFREQ of CA15 L22 : 900000 uV
- [ 10.331727] [B0: swapper/0: 1] fout_apll[800000000]
- [ 10.344126] [B0: swapper/0: 1] wake enabled for irq 533
- [ 10.346499] [B0: swapper/0: 1] input: Headset as /devices/platform/s3c64xx-spi.2/spi_master/spi2/spi2.0/arizona-extcon/input/input9
- [ 10.347822] [B3: irq/533-arizona: 993] arizona spi2.0: Spurious HPDET IRQ
- [ 10.348497] [B1: swapper/0: 1] MIF 800000Khz ASV is 962500uV
- [ 10.348647] [B1: swapper/0: 1] MIF 733000Khz ASV is 950000uV
- [ 10.348841] [B1: swapper/0: 1] MIF 667000Khz ASV is 912500uV
- [ 10.348970] [B1: swapper/0: 1] MIF 533000Khz ASV is 850000uV
- [ 10.349160] [B1: swapper/0: 1] MIF 400000Khz ASV is 787500uV
- [ 10.349422] [B1: swapper/0: 1] MIF 266000Khz ASV is 775000uV
- [ 10.349554] [B1: swapper/0: 1] MIF 200000Khz ASV is 775000uV
- [ 10.349745] [B1: swapper/0: 1] MIF 160000Khz ASV is 775000uV
- [ 10.351114] [B1: swapper/0: 1] INT 600000Khz ASV is 975000uV
- [ 10.351320] [B1: swapper/0: 1] INT 500000Khz ASV is 975000uV
- [ 10.351512] [B1: swapper/0: 1] INT 480000Khz ASV is 900000uV
- [ 10.351640] [B1: swapper/0: 1] INT 460000Khz ASV is 900000uV
- [ 10.351829] [B1: swapper/0: 1] INT 440000Khz ASV is 900000uV
- [ 10.351960] [B1: swapper/0: 1] INT 400000Khz ASV is 900000uV
- [ 10.352150] [B1: swapper/0: 1] INT 333000Khz ASV is 900000uV
- [ 10.352338] [B1: swapper/0: 1] INT 222000Khz ASV is 900000uV
- [ 10.352467] [B1: swapper/0: 1] INT 133000Khz ASV is 862500uV
- [ 10.354865] [B1: swapper/0: 1] sec_bat_adc_ap_init: sec_bat_adc_ap_init succeed
- [ 10.355073] [B0: swapper/0: 1] sec_bat_check_batt_id: batt_type(SDI SDI), batt_id(647), cap(0x4a8e), type(SDI)
- [ 10.356867] [B0: swapper/0: 1] sec_bat_is_lpm: lpcharge(0)
- [ 10.357365] [B0: kworker/0:1: 472] sec_bat_is_lpm: lpcharge(0)
- [ 10.357866] [B0: swapper/0: 1] sec_bat_check_cable_result_callback set vbus applied
- [ 10.358744] [B2: kworker/u:3: 1416] max77803_charger_unlock: unlocked state, return
- [ 10.358990] [B2: kworker/u:3: 1416] sec_chg_set_property: cable type = 4
- [ 10.359199] [B2: kworker/u:3: 1416] max77803_set_topoff_current: reg_data(0x3e), topoff(300), back-charging time(2400 sec)
- [ 10.360116] [B0: swapper/0: 1] i2c-gpio i2c-gpio.22: using pins 31 (SDA) and 101 (SCL)
- [ 10.360409] [B0: swapper/0: 1] ice4_fpga: barcode_emul_probe probe!
- [ 10.361445] [B1: swapper/0: 1] ice4_fpga: probe complete barcode_emul_probe
- [ 10.361521] [B3: kworker/u:0: 5] ice4_fpga: barcode_fpga_fimrware_update_start
- [ 10.362409] [B2: kworker/u:3: 1416] max77803_set_charge_current: reg_data(0x8c), charge(480)
- [ 10.362858] [B0: kworker/u:0: 5] ice4_fpga: CDONE_FAIL 0
- [ 10.366365] [B2: kworker/u:3: 1416] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 10.367110] [B2: kworker/u:3: 1416] max77803_set_input_current: set_current_reg(0x0e)
- [ 10.367940] [B2: kworker/u:3: 1416] max77803_get_charger_state: CHG_DTLS : 0x 1
- [ 10.420068] [B2: kworker/u:3: 1416] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 10.420816] [B2: kworker/u:3: 1416] max77803_set_input_current: set_current_reg(0x0c)
- [ 10.421713] [B2: kworker/u:3: 1416] max77803_get_charger_state: CHG_DTLS : 0x 1
- [ 10.465948] [B1: swapper/0: 1] lsl122dl01 24-0030: tcon_bl_update_status tcon set slave
- [ 10.466200] [B1: swapper/0: 1] lsl122dl01 24-0030: tcon_tune_write: at=0, lx=0, md=0, ps=0 fc=1
- [ 10.475623] [B2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
- [ 10.475930] [B2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_cable_work: Polling time is reset to 30 sec.
- [ 10.483433] [B1: swapper/0: 1] lp855x 24-002c: lp855x_bl_update_status : state = de234220, brightness = 128, real_br = 128
- [ 10.483721] [B1: swapper/0: 1] duty_ns=50176, period_ns=100000 (10000)
- [ 10.486576] [B1: swapper/0: 1] dhd_module_init in
- [ 10.486853] [B1: swapper/0: 1] found wifi platform device bcmdhd_wlan
- [ 10.487454] [B1: swapper/0: 1] Power-up adapter 'DHD generic adapter'
- [ 10.488007] [B1: swapper/0: 1] wifi_platform_set_power = 1
- [ 10.488187] [B1: swapper/0: 1] ------------------------------------------------
- [ 10.488422] [B1: swapper/0: 1] ------------------------------------------------
- [ 10.488730] [B1: swapper/0: 1] brcm_wlan_power Enter: power on
- [ 10.488881] [B1: swapper/0: 1] gpio_table = [2]
- [ 10.694399] [B2: swapper/0: 1] wifi_platform_bus_enumerate device present 1
- [ 10.694649] [B2: swapper/0: 1] gpio_table = [6]
- [ 10.704854] [B2: swapper/0: 1] mmc_force_presence_change: called for device exynos5_device_dwmci1
- [ 10.705133] [B2: kworker/2:1: 992] mmc_host mmc1: card inserted
- [ 10.754419] [B1: kworker/1:1: 625] tmu temperature mif state 0 to 4
- [ 10.934408] I[B2: kworker/u:3: 1416] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
- [ 10.952995] I[B2: kworker/u:3: 1416] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
- [ 10.953853] I[B0: kworker/u:0: 5] dw_mmc dw_mmc.1: data CRC error
- [ 10.954326] [B2: kworker/u:3: 1416] dw_mmc dw_mmc.1: Tuning map: 0x 000000bf mid: 0
- [ 10.954566] [B2: kworker/u:3: 1416] dw_mmc dw_mmc.1: CLKSEL 0x 01020000
- [ 10.970035] [B2: kworker/u:3: 1416] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 10.970339] [B2: kworker/u:3: 1416] mmc1: new ultra high speed SDR104 SDIO card at address 0001
- [ 10.978271] [B2: kworker/u:3: 1416] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 10.983683] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: fg_test_print: AVG_VCELL(4085), data(0xcc44)
- [ 10.984735] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: fg_test_print: FULLCAP(9019), data(0x4676)
- [ 10.985797] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: fg_test_print: REMCAP_REP(8982), data(0x462c)
- [ 10.986857] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: fg_test_print: REMCAP_MIX(9165), data(0x479b)
- [ 10.987917] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: fg_test_print: REMCAP_AV(8944), data(0x45e1)
- [ 10.988175] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: fg_read_current: CURRENT(-621mA), AVG_CURRENT(-465mA)
- [ 10.988747] [B1: swapper/0: 1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 10.989178] [B1: swapper/0: 1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 10.989414] [B1: swapper/0: 1] bus num (host idx)=1, slot num (rca)=1
- [ 10.989662] [B1: swapper/0: 1] found adapter info 'DHD generic adapter'
- [ 10.989998] [B1: swapper/0: 1] alloc static buf at deb00000!
- [ 11.003155] [B1: swapper/0: 1] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
- [ 11.005239] [B1: swapper/0: 1] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- [ 11.007115] [B1: swapper/0: 1] wl_create_event_handler(): thread:wl_event_handler:609 started
- [ 11.007225] [B3: wl_event_handle: 1545] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xddad16dc
- [ 11.010021] [B3: swapper/0: 1] p2p0: P2P Interface Registered
- [ 11.010277] [B3: swapper/0: 1] wifi_platform_prealloc: failed to alloc static mem section 10
- [ 11.010585] [B3: swapper/0: 1] dhd_os_prealloc: Preallocated memory section 10(size: 1048576)allocated by kmalloc
- [ 11.011011] [B1: swapper/0: 1] dhd_attach(): thread:dhd_watchdog_thread:610 started
- [ 11.011407] [B3: swapper/0: 1] dhd_attach(): thread:dhd_dpc:611 started
- [ 11.011721] [B1: swapper/0: 1] dhd_attach(): thread:dhd_rxf:612 started
- [ 11.011984] [B1: swapper/0: 1] dhd_deferred_work_init: work queue initialized
- [ 11.012974] [B1: swapper/0: 1] Dongle Host Driver, version 1.141.64.74 (r)
- [ 11.013062] [B1: swapper/0: 1] Compiled in drivers/net/wireless/bcmdhd on Nov 19 2018 at 18:35:59
- [ 11.014986] [B1: swapper/0: 1] Register interface [wlan0] MAC: 00:b0:17
- [ 11.015076] [B1: swapper/0: 1]
- [ 11.015401] [B3: wl_event_handle: 1545] CFG80211-INFO2) wl_event_handler : was terminated
- [ 11.015794] [B1: swapper/0: 1] wl_destroy_event_handler(): thread:wl_event_handler:609 terminated OK
- [ 11.016086] [B1: swapper/0: 1] dhd_prot_ioctl : bus is down. we have nothing to do
- [ 11.016370] [B1: swapper/0: 1] dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
- [ 11.016794] [B1: swapper/0: 1] wifi_platform_set_power = 0
- [ 11.017045] [B1: swapper/0: 1] ------------------------------------------------
- [ 11.017298] [B1: swapper/0: 1] ------------------------------------------------
- [ 11.017560] [B1: swapper/0: 1] brcm_wlan_power Enter: power off
- [ 11.017806] [B1: swapper/0: 1] gpio_table = [2]
- [ 11.081296] [B2: kworker/u:3: 1416] sec-fuelgauge 18-0036: 0000h,ff00h,7f80h,ff01h,0000h,462ch,6395h,5e6fh,1e0ah,d01ch,f074h,f45ah,01bah,617fh,65a9h,479bh,4676h,2ffdh,3c00h,6100h,0290h,0148h,1e94h,00d6h,4a8eh,cc44h,2a0eh,d993h,2bbfh,2214h,0780h,45e1h,4d78h,00ach,1f00h,48e4h,1400h,2305h,1e94h,7680h,0077h,87a8h,506bh,0010h,e3e1h,290eh,374ah,0000h,9c7eh,99d4h,1180h,0800h,0100h,4971h,0780h,05e0h,0087h,0e27h,a7dah,f45ah,1680h,1008h,8fach,e000h,0180h,2e00h,1185h,bfddh,d82dh,14a1h,389bh,fc69h,6595h,4adch,4a3dh,0f00h,41d6h,41b0h,9f42h,3695h,0ca7h,0a86h,0001h,167dh,0003h,0004h,0a8ch,ffffh,4c10h,0008h,4c40h,0000h,4000h,0000h,d5f0h,0720h,0000h,0000h,0000h,0000h,0000h,0000h,617fh,05f7h,3b40h,5787h,f0e7h,d7cdh,0082h,3910h,d01ch,6516h,
- [ 11.083924] [B2: kworker/u:3: 1416] sec_bat_is_lpm: lpcharge(0)
- [ 11.089648] [B2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4162mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(300),is_hc_usb(0)
- [ 11.090609] [B2: kworker/u:3: 1416] max77803_get_health_state: CHG_DTLS(0x3),
- [ 11.091500] [B2: kworker/u:3: 1416] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 11.093088] [B2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- [ 11.093443] [B2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 11.093994] [B2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 11.119431] [B2: kworker/u:2: 990] max77803_chgin_init_work
- [ 11.120046] [B1: swapper/0: 1] ALSA device list:
- [ 11.120214] [B1: swapper/0: 1] #0: AdonisUniv Sound Card
- [ 11.120570] [B1: swapper/0: 1] Warning: unable to open an initial console.
- [ 11.120847] [B1: swapper/0: 1] Write protecting the kernel text section c0008000 - c0b42000
- [ 11.121685] [B1: swapper/0: 1] rodata_test: attempting to write to read-only section:
- [ 11.121950] [B1: swapper/0: 1] write to read-only section trapped, success
- [ 11.125917] [B3: init: 1] init: init first stage started!
- [ 11.163191] [B3: init: 1] SELinux: selinux_complete_init done...
- [ 11.334349] [B1: init: 1] SELinux: avc_ss_reset(seqno) done...
- [ 11.334588] [B1: init: 1] SELinux: selnl_notify_policyload done...
- [ 11.334749] [B1: init: 1] SELinux: selinux_status_update_policyload done...
- [ 11.334981] [B1: init: 1] SELinux: selinux_netlbl_cache_invalidate done...
- [ 11.335212] [B1: init: 1] SELinux: selinux_xfrm_notify_policyload done...
- [ 11.353245] [B1: init: 1] init: (Initializing SELinux enforcing took 0.23s.)
- [ 11.360533] [B2: init: 1] init: init second stage started!
- [ 11.374151] [B2: init: 1] init: Running restorecon...
- [ 11.495045] [B2: init: 1] init: waitpid failed: No child processes
- [ 11.496234] [B2: init: 1] init: (Loading properties from /default.prop took 0.00s.)
- [ 11.501168] [B2: init: 1] init: (Parsing /init.environ.rc took 0.00s.)
- [ 11.502360] [B2: init: 1] init: (Parsing /init.usb.rc took 0.00s.)
- [ 11.507343] [B2: init: 1] init: (Parsing init.universal5420.usb.rc took 0.00s.)
- [ 11.508021] [B2: init: 1] init: (Parsing init.universal5420.wifi.rc took 0.00s.)
- [ 11.508638] [B2: init: 1] init: (Parsing init.samsung.rc took 0.00s.)
- [ 11.509426] [B2: init: 1] init: (Parsing init.target.rc took 0.00s.)
- [ 11.509617] [B2: init: 1] init: (Parsing /init.universal5420.rc took 0.01s.)
- [ 11.511661] [B2: init: 1] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 11.512122] [B2: init: 1] init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 11.514063] [B2: init: 1] init: (Parsing /init.cm.rc took 0.00s.)
- [ 11.514257] [B2: init: 1] init: (Parsing /init.rc took 0.02s.)
- [ 11.514798] [B2: init: 1] sec_bat_is_lpm: lpcharge(0)
- [ 11.516065] [B2: init: 1] init: Starting service 'ueventd'...
- [ 11.522331] [B1: ueventd: 1562] ueventd: ueventd started!
- [ 11.559532] [B3: init: 1] init: Waiting for /dev/.coldboot_done...
- [ 11.759511] [B0: kworker/u:0: 5] ice4_fpga: CDONE_SUCCESS
- [ 11.759711] [B0: kworker/u:0: 5] ice4_fpga: CDONE_SUCCESS
- [ 11.759842] [B0: kworker/u:0: 5] ice4_fpga: barcode firmware update success
- [ 12.097568] [B2: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 12.103269] [B2: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 12.108273] [B2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4170mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(298),is_hc_usb(0)
- [ 12.109217] [B2: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 12.110038] [B2: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 12.111535] [B2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- [ 12.111904] [B2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 12.112339] [B2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 12.204702] [B3: ueventd: 1562] sec_bat_is_lpm: lpcharge(0)
- [ 12.484614] [B3: ueventd: 1562] max77803_get_charger_state: CHG_DTLS : 0x 1
- [ 12.485465] [B3: ueventd: 1562] max77803_get_health_state: CHG_DTLS(0x3),
- [ 12.486292] [B3: ueventd: 1562] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 12.489008] [B3: ueventd: 1562] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 12.507016] [B3: ueventd: 1562] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
- [ 12.532814] [B0: ueventd: 1562] ueventd: Coldboot took 1.01s.
- [ 12.542430] [B1: init: 1] init: Waiting for /dev/.coldboot_done took 0.98s.
- [ 12.542675] [B1: init: 1] init: /dev/hw_random not found
- [ 12.542932] [B1: init: 1] keychord: using input dev max77803-muic for fevent
- [ 12.543148] [B1: init: 1] keychord: using input dev gpio-keys for fevent
- [ 12.543348] [B1: init: 1] keychord: using input dev Headset for fevent
- [ 12.543634] [B1: init: 1] init: console init failed. Open on Console device failed(No such device)
- [ 12.655926] [B1: init: 1] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 12.659438] [B1: init: 1] init: /dev/hw_random not found
- [ 12.672151] [B3: init: 2317] EXT4-fs (mmcblk0p20): recovery complete
- [ 12.672314] [B3: init: 2317] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null)
- [ 12.672658] [B3: init: 2317] SELinux: Context u:object_r:hidden_file:s0 is not valid (left unmapped).
- [ 12.673096] [B3: init: 2317] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/HIDDEN,target=/preload,type=ext4)=0
- [ 12.677054] [B3: init: 2317] EXT4-fs (mmcblk0p18): mounted filesystem without journal. Opts: errors=panic
- [ 12.677576] [B3: init: 2317] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/SYSTEM,target=/system,type=ext4)=0
- [ 12.682966] [B3: init: 2317] printing data of superblock-bh
- [ 12.683166] [B3: init: 2317] print_bh: bh dccc9a00, bh->b_size 1024, bh->b_data c6455400
- [ 12.683369] [B3: init: 2317] As EXT4-fs error, printing data in hex
- [ 12.683561] [B3: init: 2317] [partition info] s_id : mmcblk0p16, start sector# : 237568
- [ 12.683707] [B3: init: 2317] dump block# : 1, start offset(byte) : 0
- [ 12.683902] [B3: init: 2317] length(byte) : 1024, data_to_dump 0xc6455400
- [ 12.684095] [B3: init: 2317] -------------------------------------------------
- [ 12.684239] [B3: init: 2317] 0x0000 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.684541] [B3: init: 2317] 0x0010 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.684760] [B3: init: 2317] 0x0020 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.684978] [B3: init: 2317] 0x0030 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.685197] [B3: init: 2317] 0x0040 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.685415] [B3: init: 2317] 0x0050 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.685634] [B3: init: 2317] 0x0060 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.685854] [B3: init: 2317] 0x0070 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.686073] [B3: init: 2317] 0x0080 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.686293] [B3: init: 2317] 0x0090 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.686512] [B3: init: 2317] 0x00a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.686731] [B3: init: 2317] 0x00b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.686948] [B3: init: 2317] 0x00c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.687165] [B3: init: 2317] 0x00d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.687387] [B3: init: 2317] 0x00e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.687605] [B3: init: 2317] 0x00f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.687825] [B3: init: 2317] 0x0100 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.688044] [B3: init: 2317] 0x0110 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.688263] [B3: init: 2317] 0x0120 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.688480] [B3: init: 2317] 0x0130 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.688699] [B3: init: 2317] 0x0140 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.688918] [B3: init: 2317] 0x0150 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.689074] [B3: init: 2317] 0x0160 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.689348] [B3: init: 2317] 0x0170 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.689591] [B3: init: 2317] 0x0180 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.689812] [B3: init: 2317] 0x0190 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.690029] [B3: init: 2317] 0x01a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.690247] [B3: init: 2317] 0x01b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.690466] [B3: init: 2317] 0x01c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.690684] [B3: init: 2317] 0x01d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.690902] [B3: init: 2317] 0x01e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.691121] [B3: init: 2317] 0x01f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.691338] [B3: init: 2317] 0x0200 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.691556] [B3: init: 2317] 0x0210 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.691773] [B3: init: 2317] 0x0220 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.691991] [B3: init: 2317] 0x0230 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.692209] [B3: init: 2317] 0x0240 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.692428] [B3: init: 2317] 0x0250 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.692646] [B3: init: 2317] 0x0260 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.692864] [B3: init: 2317] 0x0270 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.693082] [B3: init: 2317] 0x0280 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.693302] [B3: init: 2317] 0x0290 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.693521] [B3: init: 2317] 0x02a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.693680] [B3: init: 2317] 0x02b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.693900] [B3: init: 2317] 0x02c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.694118] [B3: init: 2317] 0x02d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.694400] [B3: init: 2317] 0x02e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.694621] [B3: init: 2317] 0x02f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.694839] [B3: init: 2317] 0x0300 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.695056] [B3: init: 2317] 0x0310 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.695272] [B3: init: 2317] 0x0320 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.695490] [B3: init: 2317] 0x0330 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.695707] [B3: init: 2317] 0x0340 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.695926] [B3: init: 2317] 0x0350 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.696146] [B3: init: 2317] 0x0360 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.696364] [B3: init: 2317] 0x0370 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.696582] [B3: init: 2317] 0x0380 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.696801] [B3: init: 2317] 0x0390 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.697019] [B3: init: 2317] 0x03a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.697237] [B3: init: 2317] 0x03b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.697454] [B3: init: 2317] 0x03c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.697673] [B3: init: 2317] 0x03d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.697892] [B3: init: 2317] 0x03e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.698111] [B3: init: 2317] 0x03f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
- [ 12.698262] [B3: init: 2317] ---------------------------------------------------
- [ 12.698463] [B3: init: 2317] EXT4-fs (mmcblk0p16): VFS: Can't find ext4 filesystem
- [ 12.733620] [B1: kworker/1:0: 9] ALSA device list:
- [ 12.739445] [B2: init: 2317] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/PERSDATA,target=/persist,type=ext4)=-1
- [ 12.740406] [B2: init: 2317] fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/platform/dw_mmc.0/by-name/PERSDATA at /persist options: barrier=1 error: Invalid argument
- [ 12.741579] [B1: kworker/1:0: 9] SRP: Completed loading vliw[45276]
- [ 12.741781] [B1: kworker/1:0: 9] SRP: Completed loading cga[34272]
- [ 12.741970] [B1: kworker/1:0: 9] SRP: Completed loading data[57420]
- [ 12.742142] [B1: kworker/1:0: 9] SRP: [VA]IBUF0[0xdfb88104], [PA]IBUF0[0x3008104]
- [ 12.742344] [B1: kworker/1:0: 9] SRP: [VA]IBUF1[0xdfb8c104], [PA]IBUF1[0x300c104]
- [ 12.742554] [B1: kworker/1:0: 9] SRP: [VA]OBUF0[0xdfb90104], [PA]OBUF0[0x3010104]
- [ 12.742689] [B1: kworker/1:0: 9] SRP: [VA]OBUF1[0xdfb94104], [PA]OBUF1[0x3014104]
- [ 12.742887] [B1: kworker/1:0: 9] SRP: IBUF SIZE [16384]Bytes, OBUF SIZE [16384]Bytes
- [ 12.743111] [B1: kworker/1:0: 9] EPLL is on
- [ 12.743768] [B1: kworker/1:0: 9] samsung-i2s samsung-i2s.4: EPLL rate = 24000000
- [ 12.743971] [B1: kworker/1:0: 9] samsung-i2s samsung-i2s.4: SRP rate = 24000000
- [ 12.744176] [B1: kworker/1:0: 9] samsung-i2s samsung-i2s.4: BUS rate = 24000000
- [ 12.753525] I[B0: mmcqd/0: 1334] SRP: Complete h/w reset.
- [ 12.753725] [B1: kworker/1:0: 9] SRP: Already set SRP pending control[1]
- [ 12.754142] [B1: kworker/1:0: 9] EPLL is off
- [ 12.761788] [B3: init: 2317] EXT4-fs (mmcblk0p3): recovery complete
- [ 12.762945] [B3: init: 2317] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 12.763478] [B3: init: 2317] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-name/EFS,/efs,ext4)=0: Success
- [ 12.799407] [B1: init: 2317] fs_mgr: check_fs(): unmount(/efs) succeeded
- [ 12.800441] [B1: init: 2317] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-name/EFS
- [ 12.912011] [B0: init: 2317] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 12.912068] [B0: init: 2317]
- [ 12.912426] [B0: init: 2317] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 12.912488] [B0: init: 2317]
- [ 12.912743] [B0: init: 2317] e2fsck: Pass 2: Checking directory structure
- [ 12.912801] [B0: init: 2317]
- [ 12.913054] [B0: init: 2317] e2fsck: Pass 3: Checking directory connectivity
- [ 12.913113] [B0: init: 2317]
- [ 12.913364] [B0: init: 2317] e2fsck: Pass 4: Checking reference counts
- [ 12.913420] [B0: init: 2317]
- [ 12.913671] [B0: init: 2317] e2fsck: Pass 5: Checking group summary information
- [ 12.913731] [B0: init: 2317]
- [ 12.913982] [B0: init: 2317] e2fsck: /dev/block/platform/dw_mmc.0/by-name/EFS: 77/1280 files (0.0% non-contiguous), 1178/5120 blocks
- [ 12.914071] [B0: init: 2317]
- [ 12.918093] [B1: init: 2317] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
- [ 12.918637] [B1: init: 2317] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/EFS,target=/efs,type=ext4)=0
- [ 12.923081] [B1: init: 2317] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-name/CACHE,/cache,ext4)=-1: No such file or directory
- [ 12.923371] [B1: init: 2317] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-name/CACHE
- [ 13.003155] [B1: init: 2317] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 13.003210] [B1: init: 2317]
- [ 13.003495] [B1: init: 2317] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 13.003556] [B1: init: 2317]
- [ 13.003813] [B1: init: 2317] e2fsck: Pass 2: Checking directory structure
- [ 13.003870] [B1: init: 2317]
- [ 13.004127] [B1: init: 2317] e2fsck: Pass 3: Checking directory connectivity
- [ 13.004186] [B1: init: 2317]
- [ 13.004516] [B1: init: 2317] e2fsck: Pass 4: Checking reference counts
- [ 13.004572] [B1: init: 2317]
- [ 13.004821] [B1: init: 2317] e2fsck: Pass 5: Checking group summary information
- [ 13.004882] [B1: init: 2317]
- [ 13.005134] [B1: init: 2317] e2fsck: /dev/block/platform/dw_mmc.0/by-name/CACHE: 19/26624 files (0.0% non-contiguous), 3458/106496 blocks
- [ 13.005226] [B1: init: 2317]
- [ 13.008626] [B1: init: 2317] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
- [ 13.009190] [B1: init: 2317] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/CACHE,target=/cache,type=ext4)=0
- [ 13.009497] [B1: init: 2317] fs_mgr: mount_with_alternatives(): skipping fstab dup mountpoint=/cache rec[7].fs_type=f2fs already mounted as ext4.
- [ 13.022831] [B1: init: 2317] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 13.023370] [B1: init: 2317] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-name/USERDATA,/data,ext4)=0: Success
- [ 13.049418] [B3: init: 2317] fs_mgr: check_fs(): unmount(/data) succeeded
- [ 13.049680] [B3: init: 2317] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-name/USERDATA
- [ 13.115871] [B2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 13.121449] [B2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 13.126484] [B2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4165mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(298),is_hc_usb(0)
- [ 13.127424] [B2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 13.128297] [B2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 13.129964] [B2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- [ 13.130289] [B2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 13.130874] [B2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 13.516305] [B0: init: 2317] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 13.516361] [B0: init: 2317]
- [ 13.516646] [B0: init: 2317] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 13.516708] [B0: init: 2317]
- [ 13.516964] [B0: init: 2317] e2fsck: Pass 2: Checking directory structure
- [ 13.517021] [B0: init: 2317]
- [ 13.517275] [B0: init: 2317] e2fsck: Pass 3: Checking directory connectivity
- [ 13.517333] [B0: init: 2317]
- [ 13.517645] [B0: init: 2317] e2fsck: Pass 4: Checking reference counts
- [ 13.517700] [B0: init: 2317]
- [ 13.517949] [B0: init: 2317] e2fsck: Pass 5: Checking group summary information
- [ 13.518010] [B0: init: 2317]
- [ 13.518263] [B0: init: 2317] e2fsck: /dev/block/platform/dw_mmc.0/by-name/USERDATA: 45/835584 files (4.4% non-contiguous), 243241/6678524 blocks
- [ 13.518358] [B0: init: 2317]
- [ 13.527773] [B2: init: 2317] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
- [ 13.528386] [B2: init: 2317] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-name/USERDATA,target=/data,type=ext4)=0
- [ 13.528637] [B2: init: 2317] fs_mgr: mount_with_alternatives(): skipping fstab dup mountpoint=/data rec[9].fs_type=f2fs already mounted as ext4.
- [ 13.531342] [B2: init: 2317] init: fs_mgr_mount_all returned an error
- [ 13.534450] [B1: init: 1] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
- [ 13.535179] [B1: init: 1] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
- [ 13.535889] [B1: init: 1] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
- [ 13.536734] [B1: init: 1] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
- [ 13.537445] [B1: init: 1] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
- [ 13.538193] [B1: init: 1] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
- [ 13.539009] [B1: init: 1] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
- [ 13.539786] [B1: init: 1] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
- [ 13.540524] [B1: init: 1] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
- [ 13.541246] [B1: init: 1] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
- [ 13.541941] [B1: init: 1] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
- [ 13.542580] [B1: init: 1] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
- [ 13.543562] [B1: init: 1] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
- [ 13.544346] [B1: init: 1] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
- [ 13.545050] [B1: init: 1] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
- [ 13.545738] [B1: init: 1] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
- [ 13.546375] [B1: init: 1] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
- [ 13.547068] [B1: init: 1] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
- [ 13.547788] [B1: init: 1] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
- [ 13.548497] [B1: init: 1] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
- [ 13.549203] [B1: init: 1] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
- [ 13.549895] [B1: init: 1] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
- [ 13.550588] [B1: init: 1] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
- [ 13.551267] [B1: init: 1] init: (Parsing /system/etc/init/recovery-persist.rc took 0.00s.)
- [ 13.551938] [B1: init: 1] init: (Parsing /system/etc/init/recovery-refresh.rc took 0.00s.)
- [ 13.552680] [B1: init: 1] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
- [ 13.553373] [B1: init: 1] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
- [ 13.555398] [B1: init: 1] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
- [ 13.556140] [B1: init: 1] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
- [ 13.556837] [B1: init: 1] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
- [ 13.557713] [B1: init: 1] init: fs_mgr_mount_all returned unexpected error 255
- [ 13.570029] [B1: init: 1] init: (Loading properties from /system/build.prop took 0.00s.)
- [ 13.570354] [B1: init: 1] init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 13.570627] [B1: init: 1] init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 13.575030] [B1: init: 1] init: Starting service 'logd'...
- [ 13.586697] [B1: init: 1] init: SELinux: Could not set context for /persist: Read-only file system
- [ 13.589630] [B1: init: 1] init: write_file: Unable to open '/sys/kernel/debug/tracing/tracing_on': No such file or directory
- [ 13.590441] [B1: init: 1] init: Starting service 'exec 1 (/system/bin/recovery-refresh)'...
- [ 13.613481] [B1: init: 1] init: Service 'exec 1 (/system/bin/recovery-refresh)' (pid 2346) exited with status 254
- [ 13.614818] [B1: init: 1] init: Starting service 'debuggerd'...
- [ 13.615845] [B1: init: 1] init: do_start: Service debuggerd64 not found
- [ 13.617174] [B2: init: 1] init: Starting service 'vold'...
- [ 13.620123] [B2: init: 1] init: Not bootcharting.
- [ 13.628346] [B0: logd: 2345] logd.auditd: start
- [ 13.628586] [B0: logd: 2345] logd.klogd: 13599285090
- [ 13.853058] [B3: logd.auditd: 2436] type=2000 audit(6.600:1): initialized
- [ 13.855911] [B3: logd.auditd: 2436] type=1325 audit(8.495:2): table=filter family=2 entries=0
- [ 13.856554] [B3: logd.auditd: 2436] type=1325 audit(8.495:3): table=mangle family=2 entries=0
- [ 13.857133] [B3: logd.auditd: 2436] type=1325 audit(8.495:4): table=nat family=2 entries=0
- [ 13.857747] [B3: logd.auditd: 2436] type=1325 audit(8.495:5): table=raw family=2 entries=0
- [ 13.858361] [B3: logd.auditd: 2436] type=1325 audit(8.495:6): table=security family=2 entries=0
- [ 13.862062] [B0: logd.auditd: 2436] type=1325 audit(8.500:7): table=filter family=3 entries=0
- [ 13.862816] [B1: logd.auditd: 2436] type=1325 audit(8.505:8): table=filter family=10 entries=0
- [ 13.863616] [B1: logd.auditd: 2436] type=1325 audit(8.505:9): table=mangle family=10 entries=0
- [ 13.864519] [B1: logd.auditd: 2436] type=1325 audit(8.505:10): table=raw family=10 entries=0
- [ 13.865320] [B1: logd.auditd: 2436] type=1403 audit(1325555047.520:11): policy loaded auid=4294967295 ses=4294967295
- [ 13.866122] [B1: logd.auditd: 2436] type=1305 audit(1325555049.790:12): audit_pid=2345 old=0 auid=4294967295 ses=4294967295 subj=u:r:logd:s0 res=1
- [ 13.866880] [B1: logd.auditd: 2436] type=1305 audit(1325555049.790:13): audit_rate_limit=20 old=0 auid=4294967295 ses=4294967295 subj=u:r:logd:s0 res=1
- [ 13.901057] [B2: init: 1] init: Starting service 'exec 2 (/system/bin/tzdatacheck)'...
- [ 13.935952] [B2: init: 1] init: Service 'exec 2 (/system/bin/tzdatacheck)' (pid 2461) exited with status 0
- [ 13.952550] [B2: init: 1] SELinux: Context u:object_r:drm_efs_file:s0 is not valid (left unmapped).
- [ 13.958932] [B2: init: 1] init: Starting service 'sysinit'...
- [ 13.962564] [B2: init: 1] init: Starting service 'exec 3 (/system/bin/recovery-persist)'...
- [ 13.987505] [B2: init: 1] init: Service 'exec 3 (/system/bin/recovery-persist)' (pid 2463) exited with status 0
- [ 13.987952] [B2: init: 1] init: (Loading properties from /data/local.prop took 0.00s.)
- [ 13.989032] [B2: init: 1] init: Starting service 'logd-reinit'...
- [ 13.996899] [B2: init: 1] init: Starting service 'healthd'...
- [ 13.998708] [B2: init: 1] init: Starting service 'mobicore'...
- [ 14.000313] [B2: init: 1] init: Service sswap does not have a SELinux domain defined.
- [ 14.000498] [B2: init: 1] init: Starting service 'sswap'...
- [ 14.002183] [B2: init: 1] init: Starting service 'lmkd'...
- [ 14.003998] [B2: init: 1] init: Starting service 'servicemanager'...
- [ 14.006805] [B2: init: 1] init: Starting service 'surfaceflinger'...
- [ 14.010595] [B0: logd.auditd: 2436] type=1400 audit(1325555050.175:14): avc: denied { execute_no_trans } for pid=2468 comm="init" path="/sbin/sswap" dev="rootfs" ino=2037 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
- [ 14.020128] [B2: init: 1] SELinux: Context u:object_r:prov_efs_file:s0 is not valid (left unmapped).
- [ 14.026126] [B0: sswap: 2468] Adding 1048572k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:1048572k SSFS
- [ 14.029705] [B0: logd.auditd: 2436] type=1300 audit(1325555050.175:14): arch=40000028 syscall=11 per=800000 success=yes exit=0 a0=b68d0790 a1=b68398f0 a2=dd05c a3=80 items=1 ppid=1 ppcomm=init pid=2468 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="sswap" exe="/sbin/sswap" subj=u:r:init:s0 key=(null)
- [ 14.030490] [B0: logd.auditd: 2436] type=1309 audit(1325555050.175:14): argc=2 a0="/sbin/sswap" a1="-s"
- [ 14.030775] [B2: init: 1] init: Service 'sswap' (pid 2468) exited with status 0
- [ 14.031193] [B0: logd.auditd: 2436] type=1307 audit(1325555050.175:14): cwd="/"
- [ 14.031896] [B0: logd.auditd: 2436] type=1302 audit(1325555050.175:14): item=0 name="/sbin/sswap" inode=2037 dev=00:01 mode=0100750 ouid=0 ogid=0 rdev=00:00 obj=u:object_r:rootfs:s0
- [ 14.032625] [B0: logd.auditd: 2436] type=1320 audit(1325555050.175:14):
- [ 14.033184] [B0: logd.auditd: 2436] type=1400 audit(1325555050.180:15): avc: denied { write } for pid=2468 comm="sswap" name="vnswap0" dev="tmpfs" ino=6261 scontext=u:r:init:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
- [ 14.033721] [B0: logd.auditd: 2436] type=1300 audit(1325555050.180:15): arch=40000028 syscall=33 per=800000 success=yes exit=0 a0=160bb a1=6 a2=af1342e4 a3=0 items=1 ppid=1 ppcomm=init pid=2468 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="sswap" exe="/sbin/sswap" subj=u:r:init:s0 key=(null)
- [ 14.039272] [B0: logd.daemon: 2349] logd.daemon: reinit
- [ 14.043518] [B3: healthd: 2466] binder: 2466:2466 transaction failed 29189, size 0-0
- [ 14.048218] [B0: logd.auditd: 2436] type=1307 audit(1325555050.180:15): cwd="/"
- [ 14.048972] [B0: logd.auditd: 2436] type=1302 audit(1325555050.180:15): item=0 name="/dev/block/vnswap0" inode=6261 dev=00:0c mode=060600 ouid=0 ogid=0 rdev=fd:00 obj=u:object_r:block_device:s0
- [ 14.049951] [B0: init: 1] init: Service 'logd-reinit' (pid 2465) exited with status 0
- [ 14.057920] [B0: init: 1] sysfs : set trip temp[0] : 70
- [ 14.058890] [B0: init: 1] sysfs : set trip temp[1] : 80
- [ 14.059194] [B0: init: 1] sysfs : set trip temp[2] : 85
- [ 14.059718] [B0: init: 1] sysfs : set trip temp[3] : 95
- [ 14.060148] [B0: init: 1] Set frequency[0] : 1800
- [ 14.060331] [B0: init: 1] Set frequency[1] : 1700
- [ 14.061203] [B0: init: 1] Set frequency[2] : 1200
- [ 14.061379] [B0: init: 1] Set frequency[3] : 600
- [ 14.062209] [B0: init: 1] sec-battery sec-battery: sec_bat_store_attrs: siop level: 99
- [ 14.064937] [B3: logd.auditd: 2436] type=1320 audit(1325555050.180:15):
- [ 14.067140] [B2: init: 1] max77803_set_charge_current: reg_data(0x8c), charge(480)
- [ 14.068880] [B2: init: 1] init: do_stop: Service ril-daemon not found
- [ 14.081320] [B2: init: 1] init: SELinux: Could not get canonical path for /sys/block/sda/queue/scheduler restorecon: No such file or directory.
- [ 14.081787] [B2: init: 1] init: SELinux: Could not get canonical path for /sys/block/sde/queue/scheduler restorecon: No such file or directory.
- [ 14.082250] [B2: init: 1] init: SELinux: Could not get canonical path for /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
- [ 14.085483] [B2: init: 1] init: write_file: Unable to open '/proc/sys/kernel/perf_event_paranoid': No such file or directory
- [ 14.085972] [B2: init: 1] init: service 'console' requires console
- [ 14.086506] [B2: init: 1] android_usb: already disabled
- [ 14.087460] [B2: init: 1] init: write_file: Unable to open '/sys/block/sda/queue/scheduler': No such file or directory
- [ 14.087822] [B2: init: 1] init: write_file: Unable to open '/sys/block/sde/queue/scheduler': No such file or directory
- [ 14.088145] [B2: init: 1] init: write_file: Unable to open '/sys/block/dm-0/queue/scheduler': No such file or directory
- [ 14.088899] [B2: init: 1] init: write_file: Unable to open '/sys/block/sda/queue/iosched/slice_idle': No such file or directory
- [ 14.089232] [B2: init: 1] init: write_file: Unable to open '/sys/block/sde/queue/iosched/slice_idle': No such file or directory
- [ 14.089695] [B2: init: 1] init: write_file: Unable to open '/sys/block/dm-0/queue/iosched/slice_idle': No such file or directory
- [ 14.090410] [B3: mc_log: 2474] mcdrvkmod mcd: *** <t MTK, Build: Nov 19 2013, 18:38:10 ***
- [ 14.090696] [B3: mc_log: 2474] mcdrvkmod mcd: *** Build by valman01@valman01-desktop, svn@r46204 ###
- [ 14.114450] [B3: mc_log: 2474] mcdrvkmod mcd: 401|SEC_DRIVER_2.0_2014.05.17
- [ 14.126745] [B0: mc_log: 2474] mcdrvkmod mcd: 501|drTima: starting main driver thread
- [ 14.126987] [B0: mc_log: 2474] mcdrvkmod mcd: 501|Info tima drMain: drTima: main driver thread started
- [ 14.134569] [B0: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 14.140469] [B0: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 14.145659] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4126mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(297),is_hc_usb(0)
- [ 14.146580] [B0: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 14.147435] [B0: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 14.148987] [B0: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 14.149185] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 14.149490] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 14.149679] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 14.150060] [B0: kworker/0:1: 472] sec_bat_is_lpm: lpcharge(0)
- [ 14.150637] [B0: kworker/0:1: 472] sec_bat_is_lpm: lpcharge(0)
- [ 14.212916] [B3: logd.auditd: 2436] type=1400 audit(1325555050.375:16): avc: denied { write } for pid=2471 comm="surfaceflinger" name="trace_marker" dev="debugfs" ino=316 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
- [ 14.213588] [B3: logd.auditd: 2436] type=1400 audit(1325555050.375:16): avc: denied { open } for pid=2471 comm="surfaceflinger" name="trace_marker" dev="debugfs" ino=316 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
- [ 14.214113] [B3: logd.auditd: 2436] type=1300 audit(1325555050.375:16): arch=40000028 syscall=322 per=800008 success=yes exit=7 a0=ffffff9c a1=b6a8504e a2=a0001 a3=0 items=1 ppid=1 ppcomm=init pid=2471 auid=4294967295 uid=1000 gid=1003 euid=1000 suid=1000 fsuid=1000 egid=1003 sgid=1003 fsgid=1003 tty=(none) ses=4294967295 comm="surfaceflinger" exe="/system/bin/surfaceflinger" subj=u:r:surfaceflinger:s0 key=(null)
- [ 14.214886] [B3: logd.auditd: 2436] type=1307 audit(1325555050.375:16): cwd="/"
- [ 14.215507] [B3: logd.auditd: 2436] type=1302 audit(1325555050.375:16): item=0 name="/sys/kernel/debug/tracing/trace_marker" inode=316 dev=00:05 mode=0100222 ouid=0 ogid=0 rdev=00:00 obj=u:object_r:debugfs:s0
- [ 14.216263] [B3: logd.auditd: 2436] type=1320 audit(1325555050.375:16):
- [ 14.481382] [B0: init: 1] init: Service 'sysinit' (pid 2462) exited with status 0
- [ 14.802902] [B0: init: 1] init: Starting service 'bootanim'...
- [ 14.803387] [B1: surfaceflinger: 2471] s3c-fb exynos5-fb.1: + s3c_fb_blank mode 0
- [ 14.803601] [B1: surfaceflinger: 2471] s3c-fb exynos5-fb.1: - s3c_fb_blank
- [ 15.045055] [B0: healthd: 2466] healthd: wakealarm_init: timerfd_create failed
- [ 15.048246] [B0: healthd: 2466] healthd: BatteryFullChargePath not found
- [ 15.048472] [B0: healthd: 2466] healthd: BatteryCycleCountPath not found
- [ 15.049445] [B0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 15.052546] [B0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 15.053698] [B0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 15.055116] [B0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 15.056701] [B2: s3c-fb-psr: 1466] s3c-fb exynos5-fb.1: s3c_fb_psr_enter +
- [ 15.058243] [B0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 15.059724] [B0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 15.069921] [B2: s3c-fb-psr: 1466] s3c-fb exynos5-fb.1: s3c_fb_psr_enter -
- [ 15.070138] [B2: s3c-fb-psr: 1466] s5p-dp s5p-dp: FB_EVENT_PSR_ENTER time = 50128 us
- [ 15.913975] [B3: EventControl: 2508] s3c-fb exynos5-fb.1: s3c_fb_psr_exit +
- [ 15.917709] [B3: logd.auditd: 2436] type=1400 audit(1325555052.080:17): avc: denied { write } for pid=2513 comm="BootAnimation" name="trace_marker" dev="debugfs" ino=316 scontext=u:r:bootanim:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
- [ 15.918855] [B3: logd.auditd: 2436] type=1400 audit(1325555052.080:17): avc: denied { open } for pid=2513 comm="BootAnimation" name="trace_marker" dev="debugfs" ino=316 scontext=u:r:bootanim:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
- [ 15.919461] [B3: logd.auditd: 2436] type=1300 audit(1325555052.080:17): arch=40000028 syscall=322 per=800008 success=yes exit=4 a0=ffffff9c a1=b5cb304e a2=a0001 a3=0 items=1 ppid=1 ppcomm=init pid=2513 auid=4294967295 uid=1003 gid=1003 euid=1003 suid=1003 fsuid=1003 egid=1003 sgid=1003 fsgid=1003 tty=(none) ses=4294967295 comm="BootAnimation" exe="/system/bin/bootanimation" subj=u:r:bootanim:s0 key=(null)
- [ 15.920124] [B3: logd.auditd: 2436] type=1307 audit(1325555052.080:17): cwd="/"
- [ 15.920765] [B3: logd.auditd: 2436] type=1302 audit(1325555052.080:17): item=0 name="/sys/kernel/debug/tracing/trace_marker" inode=316 dev=00:05 mode=0100222 ouid=0 ogid=0 rdev=00:00 obj=u:object_r:debugfs:s0
- [ 15.921503] [B3: logd.auditd: 2436] type=1320 audit(1325555052.080:17):
- [ 15.948674] [B2: EventControl: 2508] s5p-dp s5p-dp: FB_EVENT_PSR_EXIT time = 34441 us
- [ 15.948912] [B2: EventControl: 2508] s3c-fb exynos5-fb.1: s3c_fb_psr_exit -
- [ 16.169445] [B1: s3c-fb-psr: 1466] s3c-fb exynos5-fb.1: s3c_fb_psr_enter: PSR mode need to EXIT
- [ 16.169695] [B1: s3c-fb-psr: 1466] s5p-dp s5p-dp: FB_EVENT_PSR_ENTER time = 38764 us
- [ 16.169955] [B1: surfaceflinger: 2471] s3c-fb exynos5-fb.1: s3c_fb_psr_exit +
- [ 16.170170] [B1: surfaceflinger: 2471] s3c-fb exynos5-fb.1: s3c_fb_psr_exit: FIMD is already on
- [ 16.198352] [B1: surfaceflinger: 2471] s5p-dp s5p-dp: FB_EVENT_PSR_EXIT time = 27950 us
- [ 16.198676] [B1: surfaceflinger: 2471] s3c-fb exynos5-fb.1: s3c_fb_psr_exit -
- [ 16.829362] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_usb_detect info->muic_data->sw_path:0
- [ 16.830284] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_read_otg_id ret:31 val:3f adc1k:0
- [ 16.830515] [B2: kworker/2:1: 992] max77803_check_id_state: id state = 1
- [ 16.831137] [B2: kworker/2:1: 992] max77803_set_vbus_state: vbus state = 1
- [ 16.831448] [B2: kworker/2:1: 992] max77803_muic_usb_cb - USB_CABLE_ATTACHED
- [ 23.829375] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_dock_usb_detect info->muic_data->sw_path:0
- [ 23.830391] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_read_otg_id ret:31 val:3f adc1k:0
- [ 23.830642] [B2: kworker/2:1: 992] max77803_check_id_state: id state = 1
- [ 24.154049] [B0: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 24.160338] [B0: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 24.165503] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4162mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(291),is_hc_usb(0)
- [ 24.166634] [B0: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 24.167407] [B0: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 24.168888] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 24.169185] [B0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 24.169976] [B0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 24.170467] [B1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 24.173256] [B1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 24.174380] [B1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 24.175695] [B1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 24.178406] [B1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 24.180357] [B1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 31.869389] [B2: kworker/2:1: 992] max77803-muic max77803-muic: func:max77803_muic_mhl_detect cable_type:1
- [ 34.173730] [B0: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 34.179805] [B0: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 34.185373] [B0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4172mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(287),is_hc_usb(0)
- [ 34.186262] [B0: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 34.187116] [B0: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 34.188783] [B0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 34.189083] [B0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 34.189664] [B3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 34.190236] [B1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 34.194038] [B1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 34.195148] [B1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 34.196474] [B1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 34.199269] [B1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 34.200333] [B1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 44.193793] [B0: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 44.199583] [B0: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 44.204967] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4173mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(285),is_hc_usb(0)
- [ 44.205953] [B0: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 44.206832] [B0: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 44.208532] [B0: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 44.208726] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 44.208944] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 44.209161] [B0: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 44.209531] [B0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 44.210103] [B3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 44.210688] [B2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 44.213587] [B2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 44.214644] [B2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 44.215957] [B2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 44.218730] [B2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 44.219778] [B2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 54.215288] [L3: kworker/u:3: 1416] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 54.222746] [L3: kworker/u:3: 1416] sec_bat_is_lpm: lpcharge(0)
- [ 54.229457] [L3: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4207mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(280),is_hc_usb(0)
- [ 54.230956] [L3: kworker/u:3: 1416] max77803_get_health_state: CHG_DTLS(0x3),
- [ 54.232041] [L3: kworker/u:3: 1416] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 54.234123] [L3: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 54.235057] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 54.236460] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 54.238059] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 54.243944] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 54.245722] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 54.248231] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 54.253312] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 54.255567] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 62.634666] [L0: kworker/u:0: 5] $$$$$$$$$ mem1_1 BYTE[3589408]CYCLE[13215712] Ratio[(byte/cycle * 16) *100] : 1
- [ 62.635193] [L0: kworker/u:0: 5] $$$$$$$$$ mem1_0 BYTE[53474032]CYCLE[13215712] Ratio[(byte/cycle * 16) *100] : 4
- [ 62.635692] [L0: kworker/u:0: 5] $$$$$$$$$ mem0_1 BYTE[3842936]CYCLE[13215712] Ratio[(byte/cycle * 16) *100] : 1
- [ 62.636170] [L0: kworker/u:0: 5] $$$$$$$$$ mem0_0 BYTE[53570296]CYCLE[13215712] Ratio[(byte/cycle * 16) *100] : 5
- [ 64.240900] [L3: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 64.248155] [L3: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 64.255584] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4199mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(278),is_hc_usb(0)
- [ 64.256956] [L3: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 64.258184] [L3: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 64.260365] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 64.261043] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 64.262200] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 64.263243] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 64.269940] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 64.271648] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 64.274059] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 64.279883] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 64.281543] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 74.268132] [L2: kworker/u:3: 1416] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 74.275608] [L2: kworker/u:3: 1416] sec_bat_is_lpm: lpcharge(0)
- [ 74.282663] [L2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4203mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(277),is_hc_usb(0)
- [ 74.284078] [L2: kworker/u:3: 1416] max77803_get_health_state: CHG_DTLS(0x3),
- [ 74.285418] [L2: kworker/u:3: 1416] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 74.287372] [L2: kworker/u:3: 1416] sec_bat_is_lpm: lpcharge(0)
- [ 74.287789] [L2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 74.288257] [L2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 74.288727] [L2: kworker/u:3: 1416] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 74.289487] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 74.290739] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 74.291666] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 74.297257] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 74.300248] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 74.303689] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 74.308640] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 74.310433] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 84.296803] [L1: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 84.303762] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: AVG_VCELL(4170), data(0xd085)
- [ 84.305319] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: FULLCAP(9019), data(0x4676)
- [ 84.306766] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_REP(8971), data(0x4617)
- [ 84.308193] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_MIX(9154), data(0x4785)
- [ 84.309699] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_AV(8953), data(0x45f2)
- [ 84.310162] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_read_current: CURRENT(-459mA), AVG_CURRENT(-487mA)
- [ 84.409549] [L1: kworker/u:2: 990] sec-fuelgauge 18-0036: 0000h,ff00h,7f80h,ff01h,0000h,4617h,6376h,5e6fh,1b90h,d21ch,f481h,f3cfh,0193h,6182h,6586h,4785h,4676h,2de5h,3c00h,6100h,0290h,0148h,1ca4h,00d6h,4a8eh,d086h,2a0eh,d993h,2bbfh,2214h,0780h,45f2h,4d78h,00ach,1f00h,48e4h,1400h,2305h,1ca4h,7c22h,0077h,87a8h,506bh,0010h,e3e1h,290eh,374ah,0000h,9c7eh,99d4h,1180h,0800h,0100h,4957h,0780h,05e0h,0087h,0e27h,a7dah,f3cfh,1680h,1008h,914dh,e000h,c100h,da00h,1185h,0373h,cd66h,14a1h,389bh,fc8bh,6595h,a36fh,4a0bh,a700h,41d6h,419ah,b531h,0b46h,0672h,000eh,f836h,ffe9h,0071h,45f2h,ffcdh,0001h,4c10h,0008h,4c40h,0000h,4000h,0000h,d600h,0720h,0000h,0000h,0000h,0000h,0000h,0000h,6182h,f5e2h,3e11h,5866h,f497h,d7b0h,0083h,3910h,d22eh,64f7h,
- [ 84.412561] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 84.418505] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4202mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(275),is_hc_usb(0)
- [ 84.419601] [L1: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 84.420517] [L1: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 84.422116] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 84.422578] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 84.423212] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 84.423906] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 84.426982] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 84.428232] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 84.429800] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 84.432559] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 84.433675] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 94.428575] [L3: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 94.436181] [L3: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 94.443102] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4201mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(274),is_hc_usb(0)
- [ 94.444746] [L3: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 94.445860] [L3: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 94.447957] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 94.448794] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 94.450969] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 94.451560] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 94.456942] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 94.458665] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 94.461692] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 94.466746] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 94.468485] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 104.456019] [L3: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 104.463312] [L3: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 104.470219] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4202mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 104.471585] [L3: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 104.472834] [L3: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 104.475042] [L3: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 104.475340] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 104.475821] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 104.476300] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 104.477127] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 104.479224] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 104.479334] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 104.485302] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 104.487479] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 104.492851] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 104.498669] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 104.500552] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 114.482753] [L3: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 114.490335] [L3: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 114.496931] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4213mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 114.498285] [L3: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 114.499622] [L3: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 114.501765] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 114.502474] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 114.505063] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 114.505235] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 114.510654] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 114.512341] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 114.514932] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 114.520441] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 114.522250] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 115.209591] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_1 BYTE[3889712]CYCLE[13960092] Ratio[(byte/cycle * 16) *100] : 1
- [ 115.210114] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_0 BYTE[56537508]CYCLE[13960092] Ratio[(byte/cycle * 16) *100] : 6
- [ 115.210590] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_1 BYTE[4198248]CYCLE[13960092] Ratio[(byte/cycle * 16) *100] : 1
- [ 115.211069] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_0 BYTE[56626744]CYCLE[13960120] Ratio[(byte/cycle * 16) *100] : 6
- [ 124.511197] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 124.518886] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 124.525897] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4199mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 124.527262] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 124.528487] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 124.530514] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 124.531315] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 124.532068] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 124.533702] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 124.539545] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 124.541163] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 124.543714] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 124.549066] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 124.550789] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 134.538044] [L1: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 134.546260] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 134.553105] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4197mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 134.554743] [L1: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 134.555999] [L1: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 134.558091] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 134.558507] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 134.558981] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 134.559555] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 134.560234] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 134.561834] [L0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 134.562385] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 134.568425] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 134.570175] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 134.573095] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 134.578068] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 134.579708] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 144.568161] [L1: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 144.576087] [L1: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 144.582737] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4198mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 144.584241] [L1: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 144.585442] [L1: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 144.587569] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 144.588532] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 144.590152] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 144.590682] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 144.596311] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 144.597974] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 144.600787] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 144.606065] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 144.607753] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 154.595839] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 154.603294] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 154.610658] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4201mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 154.612082] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 154.613309] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 154.615475] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 154.616151] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 154.617117] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 154.618973] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 154.624776] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 154.626496] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 154.628907] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 154.633821] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 154.635599] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 164.625130] [L0: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 164.633447] [L0: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 164.642894] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4211mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 164.644264] [L0: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 164.645594] [L0: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 164.647535] [L0: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 164.647951] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 164.648422] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 164.649807] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 164.650478] [L0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 164.651932] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 164.652673] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 164.659629] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 164.661363] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 164.663765] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 164.668699] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 164.671040] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 169.029601] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_1 BYTE[5382528]CYCLE[19280348] Ratio[(byte/cycle * 16) *100] : 1
- [ 169.030126] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_0 BYTE[79077068]CYCLE[19280344] Ratio[(byte/cycle * 16) *100] : 11
- [ 169.030609] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_1 BYTE[5759472]CYCLE[19280348] Ratio[(byte/cycle * 16) *100] : 1
- [ 169.031088] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_0 BYTE[79167600]CYCLE[19280356] Ratio[(byte/cycle * 16) *100] : 11
- [ 174.659186] [L1: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 174.666868] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 174.673691] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4190mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(271),is_hc_usb(0)
- [ 174.675343] [L1: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 174.676579] [L1: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 174.678513] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 174.679433] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 174.680576] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 174.681535] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 174.689808] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 174.691563] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 174.694178] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 174.702630] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 174.704199] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 184.686792] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 184.693530] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: AVG_VCELL(4198), data(0xd1eb)
- [ 184.695052] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: FULLCAP(9019), data(0x4676)
- [ 184.696584] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_REP(8958), data(0x45fd)
- [ 184.698034] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_MIX(9142), data(0x476c)
- [ 184.699615] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_AV(8943), data(0x45de)
- [ 184.700094] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_read_current: CURRENT(-434mA), AVG_CURRENT(-476mA)
- [ 184.800281] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: 0000h,ff00h,7f80h,ff01h,0000h,45fdh,6354h,5e6fh,1b41h,d236h,f522h,f414h,018eh,6176h,6564h,476ch,4676h,2ee2h,3c00h,6100h,0290h,0148h,1b6bh,00d6h,4a8eh,d1ebh,2a0eh,d993h,2bbfh,2214h,0780h,45deh,4d78h,00ach,1f00h,48e4h,1400h,2305h,1b6bh,7cd6h,0077h,87a8h,506bh,0010h,e3e1h,290eh,374ah,0000h,9c7eh,99d4h,1180h,0800h,0100h,4947h,0780h,05e0h,0087h,0e27h,a7dah,f414h,1680h,1008h,9389h,e000h,a300h,8f00h,1185h,762eh,cd66h,14a1h,389bh,fcdfh,6595h,214fh,49b4h,a900h,41d6h,4180h,df97h,d842h,0d10h,523ah,f790h,7f80h,ff00h,0000h,000eh,0000h,4c10h,0008h,4c40h,0000h,4000h,0000h,d5f0h,0720h,0000h,0000h,0000h,0000h,0000h,0000h,6176h,f8c3h,3e6bh,586bh,f491h,d78eh,0083h,3910h,d23ah,6497h,
- [ 184.803142] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 184.808812] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4204mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 184.810011] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 184.810854] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 184.812449] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 184.813157] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 184.814114] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 184.814530] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 184.817395] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 184.818524] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 184.819875] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 184.822488] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 184.823785] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 194.818701] [L2: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 194.826105] [L2: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 194.833168] [L2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4205mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 194.834613] [L2: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 194.835844] [L2: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 194.837927] [L2: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 194.838214] [L2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 194.838691] [L2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 194.839165] [L2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 194.840097] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 194.841868] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 194.842191] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 194.847364] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 194.849005] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 194.851728] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 194.857411] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 194.859113] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 204.847337] [L2: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 204.854520] [L2: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 204.861459] [L2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4204mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 204.862831] [L2: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 204.864028] [L2: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 204.866195] [L2: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 204.866885] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 204.868017] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 204.869183] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 204.875057] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 204.876712] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 204.879088] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 204.883990] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 204.885756] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 214.873862] [L1: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 214.881517] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 214.888469] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4189mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 214.890015] [L1: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 214.891282] [L1: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 214.893381] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 214.894209] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 214.895644] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 214.896320] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 214.901456] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 214.903000] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 214.906189] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 214.911578] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 214.913076] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 222.434581] [L1: kworker/u:0: 5] $$$$$$$$$ mem1_1 BYTE[3670880]CYCLE[13300424] Ratio[(byte/cycle * 16) *100] : 1
- [ 222.435291] [L1: kworker/u:0: 5] $$$$$$$$$ mem1_0 BYTE[53981008]CYCLE[13300424] Ratio[(byte/cycle * 16) *100] : 5
- [ 222.435774] [L1: kworker/u:0: 5] $$$$$$$$$ mem0_1 BYTE[3909832]CYCLE[13300424] Ratio[(byte/cycle * 16) *100] : 1
- [ 222.436252] [L1: kworker/u:0: 5] $$$$$$$$$ mem0_0 BYTE[54074424]CYCLE[13300440] Ratio[(byte/cycle * 16) *100] : 5
- [ 224.900126] [L1: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 224.907893] [L1: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 224.914574] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4209mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 224.915918] [L1: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 224.917144] [L1: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 224.919539] [L1: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 224.919991] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 224.920473] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 224.920805] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 224.921643] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 224.923544] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 224.923931] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 224.928920] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 224.930799] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 224.933471] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 224.940302] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 224.941891] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 234.930279] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 234.938331] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 234.945189] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4198mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 234.946682] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 234.947979] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 234.950221] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 234.950911] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 234.952764] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 234.953134] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 234.958563] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 234.960386] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 234.963025] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 234.968112] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 234.969918] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 244.956606] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 244.964176] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 244.971055] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4199mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(272),is_hc_usb(0)
- [ 244.972435] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 244.973676] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 244.975866] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 244.976554] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 244.977190] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 244.978898] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 244.984564] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 244.986304] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 244.989135] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 244.994229] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 244.996143] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 254.982801] [L1: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 254.990445] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 254.997426] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4203mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 254.998775] [L1: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 254.999942] [L1: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 255.002021] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 255.002441] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 255.002914] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 255.003392] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 255.004090] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 255.006187] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 255.006554] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 255.014655] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 255.016397] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 255.018715] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 255.025101] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 255.026858] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 265.012707] [L1: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 265.020146] [L1: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 265.027313] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4209mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 265.028678] [L1: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 265.029999] [L1: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 265.031939] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 265.032749] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 265.034934] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 265.035042] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 265.042153] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 265.043819] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 265.046529] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 265.051231] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 265.052889] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 275.038519] [L1: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 275.046153] [L1: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 275.052945] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4192mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 275.054481] [L1: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 275.055746] [L1: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 275.058001] [L1: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 275.058676] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 275.060495] [L0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 275.060981] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 275.065969] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 275.067643] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 275.071180] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 275.076441] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 275.078110] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 275.584594] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_1 BYTE[3878976]CYCLE[13959204] Ratio[(byte/cycle * 16) *100] : 1
- [ 275.585878] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_0 BYTE[56898112]CYCLE[13959204] Ratio[(byte/cycle * 16) *100] : 6
- [ 275.587805] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_1 BYTE[4135160]CYCLE[13959204] Ratio[(byte/cycle * 16) *100] : 1
- [ 275.588151] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_0 BYTE[56995656]CYCLE[13959232] Ratio[(byte/cycle * 16) *100] : 6
- [ 285.065537] [L0: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 285.073345] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: AVG_VCELL(4199), data(0xd1f9)
- [ 285.074928] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: FULLCAP(9019), data(0x4676)
- [ 285.076364] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_REP(8945), data(0x45e3)
- [ 285.077783] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_MIX(9129), data(0x4752)
- [ 285.079206] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_test_print: REMCAP_AV(8931), data(0x45c6)
- [ 285.079746] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_read_current: CURRENT(-475mA), AVG_CURRENT(-471mA)
- [ 285.184374] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: 0000h,ff00h,7f80h,ff01h,0000h,45e3h,632eh,5e6fh,1b5ah,d1b2h,f41fh,f434h,018ch,6156h,653eh,4752h,4676h,2f51h,3c00h,6100h,0290h,0148h,1b4ch,00d6h,4a8eh,d1f9h,2a0eh,d993h,2bbfh,2214h,0780h,45c6h,4d78h,00ach,1f00h,48e4h,1400h,2305h,1b4ch,7c9eh,0077h,87a8h,506bh,0010h,e3e1h,290eh,374ah,0000h,9c7eh,99d4h,1180h,0800h,0100h,4944h,0780h,05e0h,0087h,0e27h,a7dah,f434h,1680h,1008h,95c5h,e000h,fa00h,2500h,1185h,c120h,cd66h,14a1h,389bh,fcfeh,6595h,7626h,4984h,9200h,41d6h,4166h,e4a6h,a4ech,00ach,87a8h,0001h,ffffh,0007h,1b4ch,f41fh,0001h,4c10h,0008h,4c40h,0000h,4000h,0000h,d5e0h,0720h,0000h,0000h,0000h,0000h,0000h,0000h,6156h,fcafh,3e4fh,57f4h,f223h,d76ch,0083h,3910h,d11eh,6458h,
- [ 285.187182] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 285.192953] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4193mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 285.193960] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 285.194925] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 285.196520] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 285.196698] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 285.196998] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 285.197292] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 285.197817] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 285.198676] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 285.201205] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 285.203671] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 285.204993] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 285.206668] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 285.209123] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 285.210908] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 295.204084] [L3: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 295.211475] [L3: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 295.218289] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4194mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(274),is_hc_usb(0)
- [ 295.219748] [L3: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 295.221041] [L3: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 295.223180] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 295.223883] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 295.225975] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 295.226223] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 295.231982] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 295.233723] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 295.236391] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 295.241786] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 295.243496] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 305.230049] [L3: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 305.237446] [L3: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 305.244295] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4201mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 305.245774] [L3: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 305.247024] [L3: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 305.248959] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 305.249865] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 305.251915] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 305.252034] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 305.257684] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 305.259917] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 305.262846] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 305.267641] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 305.269290] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 315.257892] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 315.258434] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: get_fuelgauge_soc: check fullcap range (interval:307)
- [ 315.260054] [L2: kworker/u:2: 990] sec-fuelgauge 18-0036: fg_check_vf_fullcap_range: [Case 4] previous_vffullcap = 0x48e4, NewVfFullCap = 0x48e4
- [ 315.268415] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 315.275684] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4201mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 315.277239] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 315.278324] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 315.280516] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 315.280956] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 315.281444] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 315.281931] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 315.282625] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 315.283836] [L0: kworker/0:2: 2481] sec_bat_is_lpm: lpcharge(0)
- [ 315.284924] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 315.290478] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 315.292115] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 315.296080] [L3: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 315.301078] [L3: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 315.302550] [L3: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 325.290961] [L0: kworker/u:0: 5] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 325.299100] [L3: kworker/u:0: 5] sec_bat_is_lpm: lpcharge(0)
- [ 325.306315] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4188mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 325.307885] [L3: kworker/u:0: 5] max77803_get_health_state: CHG_DTLS(0x3),
- [ 325.308989] [L3: kworker/u:0: 5] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 325.311200] [L3: kworker/u:0: 5] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 325.312053] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 325.313364] [L3: kworker/3:1: 991] sec_bat_is_lpm: lpcharge(0)
- [ 325.314115] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 325.322799] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 325.324723] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 325.327814] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 325.332634] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 325.334269] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 328.544585] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_1 BYTE[3595824]CYCLE[13295584] Ratio[(byte/cycle * 16) *100] : 1
- [ 328.545095] [L0: kworker/u:2: 990] $$$$$$$$$ mem1_0 BYTE[54638048]CYCLE[13295584] Ratio[(byte/cycle * 16) *100] : 5
- [ 328.545585] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_1 BYTE[3841320]CYCLE[13295584] Ratio[(byte/cycle * 16) *100] : 1
- [ 328.546059] [L0: kworker/u:2: 990] $$$$$$$$$ mem0_0 BYTE[54736744]CYCLE[13295584] Ratio[(byte/cycle * 16) *100] : 5
- [ 335.317893] [L3: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 335.325723] [L3: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 335.332616] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4205mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 335.333964] [L3: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 335.335301] [L3: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 335.337426] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 335.338118] [L3: kworker/3:0: 2586] sec_bat_is_lpm: lpcharge(0)
- [ 335.340589] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 335.340771] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 335.346830] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 335.348468] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 335.351312] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 335.356573] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 335.358303] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 345.349603] [L1: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 345.357117] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 345.366185] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4187mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(274),is_hc_usb(0)
- [ 345.367570] [L1: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 345.368808] [L1: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 345.370923] [L1: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 345.371369] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 345.371852] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 345.372329] [L1: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 345.373005] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 345.374001] [L3: kworker/3:0: 2586] sec_bat_is_lpm: lpcharge(0)
- [ 345.375391] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 345.380766] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 345.382541] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 345.385338] [L2: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 345.390733] [L2: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 345.392382] [L2: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 355.381461] [L0: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 355.389787] [L3: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 355.396560] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4198mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 355.397929] [L3: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 355.399154] [L3: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 355.401232] [L3: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 355.402074] [L3: kworker/3:0: 2586] sec_bat_is_lpm: lpcharge(0)
- [ 355.403863] [L1: kworker/1:0: 9] sec_bat_is_lpm: lpcharge(0)
- [ 355.404569] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 355.409780] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 355.411553] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 355.415370] [L0: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 355.421169] [L0: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 355.422702] [L0: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 365.409545] [L2: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 365.416986] [L2: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 365.423567] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4198mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 365.425384] [L2: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 365.426504] [L2: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 365.428602] [L2: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 365.429396] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 365.431279] [L2: kworker/2:1: 992] sec_bat_is_lpm: lpcharge(0)
- [ 365.433284] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 365.438282] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 365.440236] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 365.445523] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 365.450806] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 365.452480] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 375.435624] [L0: kworker/u:2: 990] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 375.444074] [L0: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 375.451334] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4185mV),Inow(480mA),Imax(300mA),SOC(99%),Tbat(273),is_hc_usb(0)
- [ 375.452688] [L0: kworker/u:2: 990] max77803_get_health_state: CHG_DTLS(0x3),
- [ 375.453979] [L0: kworker/u:2: 990] max77803_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
- [ 375.456344] [L0: kworker/u:2: 990] sec_bat_is_lpm: lpcharge(0)
- [ 375.456645] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_temperature: HT(590), HR(460), LT(-50), LR(0)
- [ 375.457122] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
- [ 375.458430] [L0: kworker/u:2: 990] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(99%)
- [ 375.459238] [L0: kworker/0:1: 2584] sec_bat_is_lpm: lpcharge(0)
- [ 375.460150] [L2: kworker/2:0: 2595] sec_bat_is_lpm: lpcharge(0)
- [ 375.461364] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 375.466768] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 375.468446] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- [ 375.473728] [L1: healthd: 2466] sec_bat_is_lpm: lpcharge(0)
- [ 375.478685] [L1: healthd: 2466] healthd: sec-charger: Unknown power supply type
- [ 375.480582] [L1: healthd: 2466] max77803_get_input_current: CHG_CNFG_09(0x0c)
- No errors detected
- Last reset was reset (RST_STAT=0x100)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement