API tools faq
paste
aprayoga

Helios4 Armbian upgrade 5.67 to 5.72

aprayoga
Jan 21st, 2019
120
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 81.46 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2018.11-armbian (Nov 26 2018 - 09:25:57 +0100)
  2. High speed PHY - Version: 2.0
  3. Detected Device ID 6828
  4. board SerDes lanes topology details:
  5. | Lane # | Speed | Type |
  6. --------------------------------
  7. | 0 | 6 | SATA0 |
  8. | 1 | 5 | USB3 HOST0 |
  9. | 2 | 6 | SATA1 |
  10. | 3 | 6 | SATA3 |
  11. | 4 | 6 | SATA2 |
  12. | 5 | 5 | USB3 HOST1 |
  13. --------------------------------
  14. High speed PHY - Ended Successfully
  15. mv_ddr: mv_ddr-armada-17.10.4
  16. DDR3 Training Sequence - Switching XBAR Window to FastPath Window
  17. DDR Training Sequence - Start scrubbing
  18. DDR3 Training Sequence - End scrubbing
  19. mv_ddr: completed successfully
  20. Trying to boot from MMC1
  21.  
  22.  
  23. U-Boot 2018.11-armbian (Nov 26 2018 - 09:25:57 +0100)
  24.  
  25. SoC: MV88F6828-A0 at 1600 MHz
  26. DRAM: 2 GiB (800 MHz, 32-bit, ECC enabled)
  27. MMC: mv_sdh: 0
  28. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  29.  
  30. Model: Helios4
  31. Board: Helios4
  32. SCSI: MVEBU SATA INIT
  33. Target spinup took 0 ms.
  34. Target spinup took 0 ms.
  35. AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  36. flags: 64bit ncq led only pmp fbss pio slum part sxs
  37.  
  38. Net:
  39. Warning: ethernet@70000 (eth1) using random MAC address - 8a:77:81:a4:9d:4b
  40. eth1: ethernet@70000
  41. Hit any key to stop autoboot: 3 2 1 0
  42. switch to partitions #0, OK
  43. mmc0 is current device
  44. Scanning mmc 0:1...
  45. Found U-Boot script /boot/boot.scr
  46. 2868 bytes read in 103 ms (26.4 KiB/s)
  47. ## Executing script at 03000000
  48. Boot script loaded from mmc
  49. 207 bytes read in 82 ms (2 KiB/s)
  50. 19512 bytes read in 224 ms (85 KiB/s)
  51. 4688192 bytes read in 903 ms (5 MiB/s)
  52. 5450232 bytes read in 1036 ms (5 MiB/s)
  53. ** File not found /boot/dtb/overlay/armada-388-helios4-fixup.scr **
  54. ## Loading init Ramdisk from Legacy Image at 02880000 ...
  55. Image Name: uInitrd
  56. Created: 2018-11-26 8:36:06 UTC
  57. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  58. Data Size: 4688128 Bytes = 4.5 MiB
  59. Load Address: 00000000
  60. Entry Point: 00000000
  61. Verifying Checksum ... OK
  62. ## Flattened Device Tree blob at 02040000
  63. Booting using the fdt blob at 0x2040000
  64. Loading Ramdisk to 0fb87000, end 0ffff900 ... OK
  65. reserving fdt memory region: addr=2040000 size=6b000
  66. Loading Device Tree to 0fb19000, end 0fb86fff ... OK
  67.  
  68. Starting kernel ...
  69.  
  70. Uncompressing Linux... done, booting the kernel.
  71. Loading, please wait...
  72. starting version 232
  73. Begin: Loading essential drivers ... done.
  74. Begin: Running /scripts/init-premount ... done.
  75. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  76. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  77. done.
  78. Begin: Will now check root file system ... fsck from util-linux 2.29.2
  79. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  80. /dev/mmcblk0p1: clean, 35993/952000 files, 271909/3868496 blocks
  81. done.
  82. done.
  83. Begin: Running /scripts/local-bottom ... done.
  84. Begin: Running /scripts/init-bottom ... done.
  85.  
  86. Welcome to Debian GNU/Linux 9 (stretch)!
  87.  
  88. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  89. [ OK ] Listening on Syslog Socket.
  90. [ OK ] Listening on Journal Socket (/dev/log).
  91. [ OK ] Created slice System Slice.
  92. [ OK ] Created slice system-serial\x2dgetty.slice.
  93. [ OK ] Listening on udev Kernel Socket.
  94. [ OK ] Listening on fsck to fsckd communication Socket.
  95. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  96. [ OK ] Created slice User and Session Slice.
  97. [ OK ] Listening on Journal Audit Socket.
  98. [ OK ] Reached target Slices.
  99. Mounting POSIX Message Queue File System...
  100. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
  101. [ OK ] Reached target Remote File Systems.
  102. [ OK ] Reached target Swap.
  103. [ OK ] Listening on Journal Socket.
  104. Starting Restore / save the current clock...
  105. Starting Load Kernel Modules...
  106. Starting Set the console keyboard layout...
  107. Starting Journal Service...
  108. Starting Create list of required st…ce nodes for the current kernel...
  109. Starting Nameserver information manager...
  110. [ OK ] Created slice system-getty.slice.
  111. [ OK ] Listening on udev Control Socket.
  112. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  113. [ OK ] Reached target Encrypted Volumes.
  114. Starting Remount Root and Kernel File Systems...
  115. Mounting Debug File System...
  116. [ OK ] Reached target Paths.
  117. [ OK ] Mounted Debug File System.
  118. [ OK ] Mounted POSIX Message Queue File System.
  119. [ OK ] Started Journal Service.
  120. [ OK ] Started Restore / save the current clock.
  121. [ OK ] Started Load Kernel Modules.
  122. [ OK ] Started Set the console keyboard layout.
  123. [ OK ] Started Create list of required sta…vice nodes for the current kernel.
  124. [ OK ] Started Remount Root and Kernel File Systems.
  125. [ OK ] Started Nameserver information manager.
  126. Starting Load/Save Random Seed...
  127. Starting udev Coldplug all Devices...
  128. Starting Create Static Device Nodes in /dev...
  129. Starting Apply Kernel Variables...
  130. Mounting FUSE Control File System...
  131. Starting Flush Journal to Persistent Storage...
  132. [ OK ] Mounted FUSE Control File System.
  133. [ OK ] Started Load/Save Random Seed.
  134. [ OK ] Started Apply Kernel Variables.
  135. [ OK ] Started Create Static Device Nodes in /dev.
  136. Starting udev Kernel Device Manager...
  137. [ OK ] Reached target Local File Systems (Pre).
  138. Mounting /tmp...
  139. [ OK ] Mounted /tmp.
  140. [ OK ] Started Flush Journal to Persistent Storage.
  141. [ OK ] Reached target Local File Systems.
  142. Starting Set console font and keymap...
  143. Starting Create Volatile Files and Directories...
  144. Starting Armbian ZRAM config...
  145. Starting Raise network interfaces...
  146. [ OK ] Started udev Kernel Device Manager.
  147. [ OK ] Started Set console font and keymap.
  148. [ OK ] Started udev Coldplug all Devices.
  149. [ OK ] Started Create Volatile Files and Directories.
  150. [ OK ] Reached target System Time Synchronized.
  151. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  152. Starting Update UTMP about System Boot/Shutdown...
  153. [ OK ] Found device /dev/ttyS0.
  154. [ OK ] Started Update UTMP about System Boot/Shutdown.
  155. [ OK ] Started Armbian ZRAM config.
  156. [ OK ] Started Raise network interfaces.
  157. Starting Armbian memory supported logging...
  158. [ OK ] Started Armbian memory supported logging.
  159. [ OK ] Reached target System Initialization.
  160. [ OK ] Listening on D-Bus System Message Bus Socket.
  161. [ OK ] Reached target Sockets.
  162. [ OK ] Started Daily Cleanup of Temporary Directories.
  163. [ OK ] Started Daily apt download activities.
  164. Starting Armbian hardware optimization...
  165. Starting Armbian hardware monitoring...
  166. [ OK ] Started Daily apt upgrade and clean activities.
  167. [ OK ] Reached target Timers.
  168. [ OK ] Started Armbian hardware optimization.
  169. [ OK ] Started Armbian hardware monitoring.
  170. [ OK ] Reached target Basic System.
  171. Starting fan speed regulator...
  172. Starting System Logging Service...
  173. Starting LSB: Start/stop sysstat's sadc...
  174. [ OK ] Started Regular background program processing daemon.
  175. [ OK ] Started D-Bus System Message Bus.
  176. Starting Network Manager...
  177. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  178. Starting Login Service...
  179. [ OK ] Started System Logging Service.
  180. [ OK ] Started LSB: Start/stop sysstat's sadc.
  181. [ OK ] Started Login Service.
  182. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  183. Starting LSB: set CPUFreq kernel parameters...
  184. [ OK ] Started LSB: set CPUFreq kernel parameters.
  185. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  186. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  187. [ OK ] Started Network Manager.
  188. [ OK ] Reached target Network.
  189. Starting OpenBSD Secure Shell server...
  190. Starting Permit User Sessions...
  191. [ OK ] Started Unattended Upgrades Shutdown.
  192. Starting Network Manager Wait Online...
  193. [ OK ] Started Permit User Sessions.
  194. Starting Network Manager Script Dispatcher Service...
  195. [ OK ] Started fan speed regulator.
  196. [ OK ] Started Network Manager Script Dispatcher Service.
  197. Starting Hostname Service...
  198. [ OK ] Started OpenBSD Secure Shell server.
  199. [ OK ] Started Hostname Service.
  200. Starting Authorization Manager...
  201. [ OK ] Started Authorization Manager.
  202. [* ] A start job is running for Network Manager Wait Online (7s / no limit)
  203. [** ] A start job is running for Network Manager Wait Online (7s / no limit)
  204. [*** ] A start job is running for Network Manager Wait Online (8s / no limit)
  205. [ *** ] A start job is running for Network Manager Wait Online (8s / no limit)
  206. [ *** ] A start job is running for Network Manager Wait Online (9s / no limit)
  207. [ OK ] Started Network Manager Wait Online.
  208. [ OK ] Reached target Network is Online.
  209. Starting LSB: Start NTP daemon...
  210. Starting /etc/rc.local Compatibility...
  211. Starting Daily apt download activities...
  212. Starting LSB: Advanced IEEE 802.11 management daemon...
  213. [ OK ] Started /etc/rc.local Compatibility.
  214. [ OK ] Started Serial Getty on ttyS0.
  215. [ OK ] Started Getty on tty1.
  216. [ OK ] Reached target Login Prompts.
  217. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  218. [ OK ] Started LSB: Start NTP daemon.
  219. [ OK ] Reached target Multi-User System.
  220. [ OK ] Reached target Graphical Interface.
  221. Starting Update UTMP about System Runlevel Changes...
  222. [ OK ] Started Daily apt download activities.
  223. Starting Daily apt upgrade and clean activities...
  224. [ OK ] Started Update UTMP about System Runlevel Changes.
  225. [ OK ] Started Daily apt upgrade and clean activities.
  226.  
  227.  
  228. Debian GNU/Linux 9 helios4 ttyS0
  229.  
  230. helios4 login: root
  231.  
  232. Password:
  233. Last login: Mon Jan 21 08:25:23 UTC 2019 on ttyS0
  234. _ _ _ _ _ _
  235. | | | | ___| (_) ___ ___| || |
  236. | |_| |/ _ \ | |/ _ \/ __| || |_
  237. | _ | __/ | | (_) \__ \__ _|
  238. |_| |_|\___|_|_|\___/|___/ |_|
  239.  
  240.  
  241. Welcome to ARMBIAN 5.67 stable Debian GNU/Linux 9 (stretch) 4.14.83-mvebu
  242. System load: 0.84 0.23 0.08 Up time: 0 min
  243. Memory usage: 2 % of 2017MB IP: 192.168.0.176
  244. CPU temp: 36°C
  245. Usage of /: 6% of 15G
  246.  
  247.  
  248. root@helios4:~# cat /boot/boot.scr
  249. 'VV|[û°D
  250. ô$("Ú
  251. ì# DO NOT EDIT THIS FILE
  252. #
  253. # Please edit /boot/armbianEnv.txt to set supported parameters
  254. #
  255.  
  256. setenv load_addr "0x300000"
  257. # default values
  258. setenv rootdev "/dev/mmcblk0p1"
  259. setenv rootfstype "ext4"
  260. setenv verbosity "1"
  261. setenv emmc_fix "off"
  262. setenv ethaddr "00:50:43:84:fb:2f"
  263. setenv eth1addr "00:50:43:25:fb:84"
  264. setenv eth2addr "00:50:43:84:25:2f"
  265. setenv eth3addr "00:50:43:0d:19:18"
  266.  
  267. echo "Boot script loaded from ${devtype}"
  268.  
  269. if load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt; then
  270. env import -t ${load_addr} ${filesize}
  271. fi
  272.  
  273. setenv bootargs "console=ttyS0,115200 root=${rootdev} rootwait rootfstype=${rootfstype} ubootdev=${devtype} scandelay loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
  274.  
  275. load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
  276. load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
  277. load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
  278.  
  279. fdt addr ${fdt_addr_r}
  280. fdt resize 65536
  281. for overlay_file in ${overlays}; do
  282. if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
  283. echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
  284. fdt apply ${load_addr} || setenv overlay_error "true"
  285. fi
  286. done
  287. for overlay_file in ${user_overlays}; do
  288. if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
  289. echo "Applying user provided DT overlay ${overlay_file}.dtbo"
  290. fdt apply ${load_addr} || setenv overlay_error "true"
  291. fi
  292. done
  293. if test "${overlay_error}" = "true"; then
  294. echo "Error applying DT overlays, restoring original DT"
  295. load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/rockchip/${fdtfile}
  296. else
  297. if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
  298. echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
  299. source ${load_addr}
  300. fi
  301. if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
  302. load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
  303. echo "Applying user provided fixup script (fixup.scr)"
  304. source ${load_addr}
  305. fi
  306. fi
  307.  
  308. # eMMC fix
  309. if test "${emmc_fix}" = "on"; then
  310. echo "Applying eMMC compatibility fix to the DT"
  311. fdt rm /soc/internal-regs/sdhci@d8000/ cd-gpios
  312. fdt set /soc/internal-regs/sdhci@d8000/ non-removable
  313. fi
  314.  
  315. # SPI - SATA workaround
  316. if test "${spi_workaround}" = "on"; then
  317. echo "Applying SPI workaround to the DT"
  318. fdt addr ${fdt_addr}
  319. fdt resize
  320. fdt set /soc/internal-regs/sata@e0000 status "disabled"
  321. fdt set /soc/internal-regs/sata@a8000 status "disabled"
  322. fdt set /soc/spi@10680 status "okay"
  323. fdt set /soc/spi@10680/spi-flash@0 status "okay"
  324. fi
  325.  
  326. bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
  327.  
  328. # Recompile with:
  329. # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
  330. root@helios4:~# apt-get update
  331.  
  332. 0% [Working]
  333.  
  334. Get:1 http://192.168.0.126:8080 stretch InRelease [3,000 B]
  335.  
  336. 0% [Connecting to httpredir.debian.org] [1 InRelease 0 B/3,000 B 0%]
  337.  
  338. 0% [Connecting to httpredir.debian.org]
  339. 0% [1 InRelease gpgv 3,000 B] [Connecting to httpredir.debian.org]
  340. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  341.  
  342. Get:2 http://192.168.0.126:8080 stretch/main armhf Packages [3,313 B]
  343.  
  344. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  345. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  346. 0% [2 Packages store 0 B] [Connecting to httpredir.debian.org] [Connecting to p
  347. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  348. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  349. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  350. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  351. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  352. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  353. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  354. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  355. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  356. 0% [Connecting to httpredir.debian.org] [Connecting to prod.debian.map.fastly.n
  357.  
  358. Get:3 http://security.debian.org stretch/updates InRelease [94.3 kB]
  359.  
  360. 0% [Waiting for headers] [3 InRelease 3,580 B/94.3 kB 4%] [Connecting to apt.ar
  361.  
  362. 0% [Waiting for headers] [Connecting to apt.armbian.com]
  363. 0% [3 InRelease gpgv 94.3 kB] [Waiting for headers] [Connecting to apt.armbian.
  364.  
  365. 0% [3 InRelease gpgv 94.3 kB] [Waiting for headers] [Waiting for headers]
  366. 0% [Connecting to cdn-fastly.deb.debian.org] [Waiting for headers] [Waiting for
  367.  
  368. Get:5 http://security.debian.org stretch/updates/main armhf Packages [565 kB]
  369.  
  370. 0% [Waiting for headers] [Waiting for headers] [5 Packages 4,920 B/565 kB 1%] [
  371.  
  372. Ign:4 http://cdn-fastly.deb.debian.org/debian stretch InRelease
  373.  
  374.  
  375. 0% [Waiting for headers] [5 Packages 74.7 kB/565 kB 13%] [Waiting for headers]
  376. 0% [5 Packages 359 kB/565 kB 63%] [Waiting for headers] 75.6 kB/s 2s
  377.  
  378. 0% [Waiting for headers] [Waiting for headers] [Waiting for headers]
  379. 0% [Waiting for headers] [5 Packages store 0 B] [Waiting for headers] [Waiting
  380.  
  381. Get:6 http://cdn-fastly.deb.debian.org/debian stretch-updates InRelease [91.0 kB]
  382.  
  383. 0% [6 InRelease 3,621 B/91.0 kB 4%] [5 Packages store 0 B] [Waiting for headers
  384.  
  385. 0% [5 Packages store 0 B] [Waiting for headers] [Waiting for headers]
  386. 0% [5 Packages store 0 B] [6 InRelease gpgv 91.0 kB] [Waiting for headers] [Wai
  387.  
  388. 0% [5 Packages store 891 kB] [6 InRelease gpgv 91.0 kB] [Waiting for headers]
  389. 0% [6 InRelease gpgv 91.0 kB] [Waiting for headers] 75.6 kB/s 0s
  390. 0% [6 InRelease gpgv 91.0 kB] [Waiting for headers] 75.6 kB/s 0s
  391.  
  392. Get:8 http://cdn-fastly.deb.debian.org/debian stretch-backports InRelease [91.8 kB]
  393.  
  394. 0% [8 InRelease 6,315 B/91.8 kB 7%] [6 InRelease gpgv 91.0 kB] [Waiting for hea
  395. 0% [6 InRelease gpgv 91.0 kB] [Waiting for headers] 75.6 kB/s 0s
  396. 0% [Waiting for headers] 75.6 kB/s 0s
  397.  
  398. 0% [Waiting for headers] [8 InRelease gpgv 91.8 kB] [Waiting for headers]
  399.  
  400. Get:9 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Packages.diff/Index [6,640 B]
  401.  
  402. 0% [9 Packages 5,056 B/6,640 B 76%] [8 InRelease gpgv 91.8 kB] [Waiting for hea
  403. 0% [8 InRelease gpgv 91.8 kB] [Waiting for headers] 75.6 kB/s 0s
  404. 0% [Waiting for headers] [8 InRelease gpgv 91.8 kB] 75.6 kB/s 0s
  405. 0% [Waiting for headers] 75.6 kB/s 1s
  406.  
  407. Get:11 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Contents (deb).diff/Index [5,656 B]
  408.  
  409. 0% [11 Contents-armhf 5,656 B/5,656 B 100%] 75.6 kB/s 1s
  410. 0% [Working] 75.6 kB/s 1s
  411.  
  412. Hit:10 http://cdn-fastly.deb.debian.org/debian stretch Release
  413.  
  414. 0% [Waiting for headers] 75.6 kB/s 1s
  415. 0% [Waiting for headers] [Release.gpg gpgv 118 kB] 75.6 kB/s 1s
  416.  
  417. Get:12 http://cdn-fastly.deb.debian.org/debian stretch-backports/main armhf Packages.diff/Index [27.8 kB]
  418.  
  419. 0% [12 Packages 5,051 B/27.8 kB 18%] [Release.gpg gpgv 118 kB] 75.6 kB/s 1s
  420. 0% [Release.gpg gpgv 118 kB] 75.6 kB/s 1s
  421.  
  422. Get:12 http://cdn-fastly.deb.debian.org/debian stretch-backports/main armhf Packages.diff/Index [27.8 kB]
  423.  
  424. 0% [Waiting for headers] [Release.gpg gpgv 118 kB] 75.6 kB/s 10s
  425.  
  426. Get:13 http://cdn-fastly.deb.debian.org/debian stretch-backports/main armhf Contents (deb).diff/Index [28.0 kB]
  427.  
  428.  
  429. 0% [13 Contents-armhf 5,051 B/28.0 kB 18%] [Release.gpg gpgv 118 kB]
  430. 0% [Waiting for headers] [Release.gpg gpgv 118 kB] 75.6 kB/s 10s
  431.  
  432. Get:13 http://cdn-fastly.deb.debian.org/debian stretch-backports/main armhf Contents (deb).diff/Index [28.0 kB]
  433.  
  434. 0% [Waiting for headers] [Release.gpg gpgv 118 kB] 75.6 kB/s 1min 35s
  435.  
  436. Get:14 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Packages.diff/Index [19.9 kB]
  437.  
  438.  
  439. 0% [14 Packages 4,961 B/19.9 kB 25%] [Release.gpg gpgv 118 kB]
  440. 0% [Waiting for headers] [Release.gpg gpgv 118 kB] 75.6 kB/s 1min 34s
  441.  
  442. Get:15 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Contents (deb).diff/Index [16.5 kB]
  443.  
  444.  
  445. 0% [15 Contents-armhf 5,014 B/16.5 kB 30%] [Release.gpg gpgv 118 kB]
  446. 0% [Waiting for headers] [Release.gpg gpgv 118 kB] 75.6 kB/s 1min 34s
  447.  
  448. Get:16 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Packages.diff/Index [13.0 kB]
  449.  
  450.  
  451. 0% [16 Packages 5,050 B/13.0 kB 39%] [Release.gpg gpgv 118 kB]
  452. 0% [Release.gpg gpgv 118 kB] 75.6 kB/s 1min 34s
  453.  
  454. Get:17 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Contents (deb).diff/Index [9,592 B]
  455.  
  456.  
  457. 0% [17 Contents-armhf 3,615 B/9,592 B 38%] [Release.gpg gpgv 118 kB]
  458. 0% [Release.gpg gpgv 118 kB] 75.6 kB/s 1min 34s
  459. 0% [Waiting for headers] 75.6 kB/s 1min 34s
  460.  
  461. Get:19 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Packages 2019-01-02-2012.38.pdiff [332 B]
  462.  
  463. 0% [19 Packages 332 B/332 B 100%] 75.6 kB/s 1min 34s
  464. 0% [Working] 75.6 kB/s 1min 34s
  465.  
  466. Get:19 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Packages 2019-01-02-2012.38.pdiff [332 B]
  467.  
  468. 0% [19 Packages rred 0 B] [Waiting for headers] 75.6 kB/s 1min 34s
  469. 0% [Waiting for headers] 75.6 kB/s 1min 34s
  470.  
  471. Get:20 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Contents (deb) 2019-01-02-2012.38.pdiff [163 B]
  472.  
  473. 0% [20 Contents-armhf 163 B/163 B 100%] 75.6 kB/s 1min 34s
  474. 0% [Working] 75.6 kB/s 1min 34s
  475.  
  476. Get:20 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf Contents (deb) 2019-01-02-2012.38.pdiff [163 B]
  477.  
  478. 0% [20 Contents-armhf rred 0 B] [Waiting for headers] 75.6 kB/s 1min 34s
  479. 0% [Waiting for headers] 75.6 kB/s 1min 34s
  480.  
  481. Get:21 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Packages 2018-12-11-1536.22.pdiff [1,728 B]
  482.  
  483. 0% [21 Packages 787 B/1,728 B 46%] 75.6 kB/s 1min 34s
  484. 0% [Working] 75.6 kB/s 1min 34s
  485.  
  486. Get:7 https://apt.armbian.com stretch InRelease [19.0 kB]
  487.  
  488. 0% [7 InRelease 16.1 kB/19.0 kB 85%] [Waiting for headers] 75.6 kB/s 1min 34s
  489. 0% [Waiting for headers] 75.6 kB/s 1min 34s
  490. 0% [Waiting for headers] [7 InRelease gpgv 19.0 kB] 75.6 kB/s 1min 34s
  491.  
  492. Get:22 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Packages 2018-12-23-2022.05.pdiff [2,582 B]
  493.  
  494.  
  495. 0% [22 Packages 2,582 B/2,582 B 100%] [7 InRelease gpgv 19.0 kB]
  496. 0% [Waiting for headers] [7 InRelease gpgv 19.0 kB] 75.6 kB/s 1min 34s
  497. 26% [Waiting for headers] 75.6 kB/s 1min 38s
  498.  
  499. Get:23 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Packages 2018-12-27-2012.46.pdiff [451 B]
  500.  
  501. 26% [23 Packages 451 B/451 B 100%] 75.6 kB/s 1min 38s
  502. 26% [Working] 75.6 kB/s 1min 38s
  503.  
  504. Get:23 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Packages 2018-12-27-2012.46.pdiff [451 B]
  505.  
  506. 26% [23 Packages rred 0 B] [Waiting for headers] 75.6 kB/s 1min 38s
  507. 26% [Waiting for headers] 75.6 kB/s 1min 38s
  508.  
  509. Get:24 https://apt.armbian.com stretch/main armhf Packages [325 kB]
  510.  
  511. 27% [24 Packages 16.1 kB/325 kB 5%] [Waiting for headers] 75.6 kB/s 1min 38s
  512.  
  513. Get:25 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Contents (deb) 2018-12-11-0810.55.pdiff [3,931 B]
  514.  
  515.  
  516. 27% [24 Packages 16.1 kB/325 kB 5%] [25 Contents-armhf 788 B/3,931 B 20%]
  517. 27% [24 Packages 16.1 kB/325 kB 5%] 75.6 kB/s 1min 38s
  518.  
  519. Get:26 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Contents (deb) 2018-12-11-1536.22.pdiff [648 B]
  520.  
  521. 28% [24 Packages 98.0 kB/325 kB 30%] [Waiting for headers] 75.6 kB/s 1min 37s
  522.  
  523. Get:27 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Contents (deb) 2018-12-23-2022.05.pdiff [108 kB]
  524.  
  525.  
  526. 28% [24 Packages 180 kB/325 kB 55%] [27 Contents-armhf 5,020 B/108 kB 5%]
  527. 29% [24 Packages 213 kB/325 kB 66%] [Waiting for headers] 75.6 kB/s 1min 37s
  528. 30% [Waiting for headers] 75.6 kB/s 1min 35s
  529. 30% [Waiting for headers] [24 Packages store 0 B] 75.6 kB/s 1min 35s
  530. 30% [Waiting for headers] 75.6 kB/s 1min 35s
  531.  
  532. Get:28 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Contents (deb) 2018-12-27-2012.46.pdiff [322 B]
  533.  
  534. 30% [28 Contents-armhf 322 B/322 B 100%] 75.6 kB/s 1min 35s
  535. 30% [Working] 75.6 kB/s 1min 35s
  536.  
  537. Get:28 http://cdn-fastly.deb.debian.org/debian stretch-backports/contrib armhf Contents (deb) 2018-12-27-2012.46.pdiff [322 B]
  538.  
  539. 30% [28 Contents-armhf rred 0 B] [Waiting for headers] 75.6 kB/s 1min 35s
  540.  
  541. Get:29 https://apt.armbian.com stretch/stretch-utils armhf Packages [4,885 B]
  542.  
  543. 30% [28 Contents-armhf rred 0 B] [Waiting for headers] 75.6 kB/s 1min 35s
  544.  
  545. 30% [28 Contents-armhf rred 0 B] [Waiting for headers] [29 Packages store 0 B]
  546. 30% [28 Contents-armhf rred 0 B] [Waiting for headers] 75.6 kB/s 1min 35s
  547. 31% [Waiting for headers] 75.6 kB/s 1min 35s
  548.  
  549. Get:30 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Packages 2018-12-15-0213.41.pdiff [422 B]
  550.  
  551. 31% [30 Packages 422 B/422 B 100%] 75.6 kB/s 1min 35s
  552. 31% [Working] 75.6 kB/s 1min 35s
  553.  
  554. Get:31 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Packages 2019-01-09-0216.37.pdiff [419 B]
  555.  
  556. 31% [31 Packages 419 B/419 B 100%] 75.6 kB/s 1min 35s
  557. 31% [Working] 75.6 kB/s 1min 35s
  558.  
  559. Get:32 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Packages 2019-01-12-2012.01.pdiff [227 B]
  560.  
  561. 31% [32 Packages 227 B/227 B 100%] 75.6 kB/s 1min 35s
  562. 31% [Working] 75.6 kB/s 1min 35s
  563.  
  564. Get:33 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Packages 2019-01-18-1414.32.pdiff [394 B]
  565.  
  566. 31% [33 Packages 394 B/394 B 100%] 75.6 kB/s 1min 35s
  567. 31% [Working] 75.6 kB/s 1min 35s
  568.  
  569. Get:33 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Packages 2019-01-18-1414.32.pdiff [394 B]
  570.  
  571. 31% [33 Packages rred 0 B] [Waiting for headers] 75.6 kB/s 1min 35s
  572. 31% [Waiting for headers] 75.6 kB/s 1min 35s
  573.  
  574. Get:34 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Contents (deb) 2019-01-12-2012.01.pdiff [271 B]
  575.  
  576. 31% [34 Contents-armhf 271 B/271 B 100%] 75.6 kB/s 1min 35s
  577. 31% [Working] 75.6 kB/s 1min 35s
  578.  
  579. Get:34 http://cdn-fastly.deb.debian.org/debian stretch-backports/non-free armhf Contents (deb) 2019-01-12-2012.01.pdiff [271 B]
  580.  
  581. 31% [34 Contents-armhf rred 0 B] [Waiting for headers] 75.6 kB/s 1min 35s
  582.  
  583. Get:35 http://cdn-fastly.deb.debian.org/debian stretch-backports/main armhf Packages [686 kB]
  584.  
  585.  
  586. 32% [34 Contents-armhf rred 85.2 kB] [35 Packages 5,046 B/686 kB 1%]
  587. 32% [35 Packages 6,278 B/686 kB 1%] 75.6 kB/s 1min 35s
  588. 38% [Working] 238 kB/s 27s
  589. 38% [Waiting for headers] [35 Packages store 0 B] 238 kB/s 27s
  590.  
  591. Get:36 http://cdn-fastly.deb.debian.org/debian stretch-backports/main armhf Contents (deb) [6,385 kB]
  592.  
  593.  
  594. 38% [36 Contents-armhf 5,022 B/6,385 kB 0%] [35 Packages store 0 B]
  595. 43% [36 Contents-armhf 536 kB/6,385 kB 8%] 238 kB/s 25s
  596. 54% [36 Contents-armhf 1,657 kB/6,385 kB 26%] 238 kB/s 20s
  597. 64% [36 Contents-armhf 2,780 kB/6,385 kB 44%] 238 kB/s 15s
  598. 75% [36 Contents-armhf 3,901 kB/6,385 kB 61%] 238 kB/s 11s
  599. 85% [36 Contents-armhf 5,028 kB/6,385 kB 79%] 238 kB/s 6s
  600. 96% [36 Contents-armhf 6,150 kB/6,385 kB 96%] 238 kB/s 1s
  601. 98% [Working] 238 kB/s 0s
  602. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  603. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  604. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  605. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  606. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  607. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  608. 98% [36 Contents-armhf store 0 B] 238 kB/s 0s
  609. 98% [36 Contents-armhf store 0 B] 983 kB/s 0s
  610. 98% [36 Contents-armhf store 0 B] 983 kB/s 0s
  611. 98% [Working] 983 kB/s 0s
  612.  
  613.  
  614. Reading package lists... 0%
  615.  
  616. Reading package lists... 0%
  617.  
  618. Reading package lists... 1%
  619.  
  620. Reading package lists... 27%
  621.  
  622. Reading package lists... 55%
  623.  
  624. Reading package lists... 82%
  625.  
  626. Reading package lists... 82%
  627.  
  628. Reading package lists... 82%
  629.  
  630. Reading package lists... 83%
  631.  
  632. Reading package lists... 83%
  633.  
  634. Reading package lists... 83%
  635.  
  636. Reading package lists... 83%
  637.  
  638. Reading package lists... 83%
  639.  
  640. Reading package lists... 83%
  641.  
  642. Reading package lists... 90%
  643.  
  644. Reading package lists... 90%
  645.  
  646. Reading package lists... 90%
  647.  
  648. Reading package lists... 90%
  649.  
  650. Reading package lists... 90%
  651.  
  652. Reading package lists... 90%
  653.  
  654. Reading package lists... 95%
  655.  
  656. Reading package lists... 95%
  657.  
  658. Reading package lists... 95%
  659.  
  660. Reading package lists... 95%
  661.  
  662. Reading package lists... 95%
  663.  
  664. Reading package lists... 95%
  665.  
  666. Reading package lists... 99%
  667.  
  668. Reading package lists... 99%
  669.  
  670. Reading package lists... 99%
  671.  
  672. Reading package lists... 99%
  673.  
  674. Reading package lists... 99%
  675.  
  676. Reading package lists... 99%
  677.  
  678. Reading package lists... 99%
  679.  
  680. Reading package lists... 99%
  681.  
  682. Reading package lists... Done
  683.  
  684. E: Could not open file /var/lib/apt/lists/httpredir.debian.org_debian_dists_stretch-backports_main_binary-armhf_Packages.diff_Index - open (2: No such file or directory)
  685. E: Could not open file /var/lib/apt/lists/httpredir.debian.org_debian_dists_stretch-backports_main_Contents-armhf.diff_Index - open (2: No such file or directory)
  686. root@helios4:~# apt-get upgrade
  687.  
  688. Reading package lists... 0%
  689.  
  690. Reading package lists... 100%
  691.  
  692. Reading package lists... Done
  693.  
  694.  
  695. Building dependency tree... 0%
  696.  
  697. Building dependency tree... 0%
  698.  
  699. Building dependency tree... 50%
  700.  
  701. Building dependency tree... 50%
  702.  
  703. Building dependency tree
  704.  
  705.  
  706. Reading state information... 0%
  707.  
  708. Reading state information... 0%
  709.  
  710. Reading state information... Done
  711.  
  712.  
  713. Calculating upgrade... 0%
  714.  
  715. Calculating upgrade... 50%
  716.  
  717. Calculating upgrade... Done
  718.  
  719. The following packages will be upgraded:
  720. armbian-config armbian-firmware armbian-tools-stretch libnss-myhostname
  721. libpam-systemd libperl5.24 libpolkit-agent-1-0 libpolkit-backend-1-0
  722. libpolkit-gobject-1-0 libssl-dev libssl1.0.2 libssl1.1 libsystemd0 libudev1
  723. linux-dtb-next-mvebu linux-image-next-mvebu linux-libc-dev
  724. linux-stretch-root-next-helios4 linux-u-boot-helios4-next openssl perl
  725. perl-base perl-modules-5.24 policykit-1 systemd systemd-sysv tzdata udev
  726. 28 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
  727. Need to get 37.3 MB of archives.
  728. After this operation, 1,026 kB of additional disk space will be used.
  729. Do you want to continue? [Y/n] Y
  730.  
  731. 0% [Working]
  732.  
  733. Get:1 http://192.168.0.126:8080 stretch/main armhf armbian-firmware all 5.72 [5,754 kB]
  734.  
  735. 0% [Connecting to httpredir.debian.org] [1 armbian-firmware 0 B/5,754 kB 0%]
  736. 9% [Waiting for headers] [Waiting for headers] [Connecting to apt.armbian.com]
  737.  
  738. Get:2 http://security.debian.org stretch/updates/main armhf libperl5.24 armhf 5.24.1-3+deb9u5 [2,850 kB]
  739.  
  740. 10% [2 libperl5.24 3,525 B/2,850 kB 0%] [Waiting for headers] [Connecting to ap
  741. 14% [2 libperl5.24 491 kB/2,850 kB 17%] [Waiting for headers] [Waiting for head
  742.  
  743. Get:3 http://192.168.0.126:8080 stretch/main armhf armbian-tools-stretch armhf 5.72 [12.4 kB]
  744.  
  745. 14% [2 libperl5.24 496 kB/2,850 kB 17%] [Waiting for headers] [Waiting for head
  746. 15% [2 libperl5.24 500 kB/2,850 kB 18%] [Waiting for headers] [Waiting for head
  747.  
  748. Get:4 http://192.168.0.126:8080 stretch/main armhf linux-dtb-next-mvebu armhf 5.72 [39.9 kB]
  749.  
  750. 15% [2 libperl5.24 502 kB/2,850 kB 18%] [Waiting for headers] [Waiting for head
  751. 16% [2 libperl5.24 513 kB/2,850 kB 18%] [Waiting for headers] [Waiting for head
  752.  
  753. Get:5 http://192.168.0.126:8080 stretch/main armhf linux-image-next-mvebu armhf 5.72 [14.1 MB]
  754.  
  755. 16% [2 libperl5.24 513 kB/2,850 kB 18%] [Waiting for headers] [Waiting for head
  756. 27% [2 libperl5.24 1,636 kB/2,850 kB 57%] [Waiting for headers] [Waiting for he
  757. 30% [2 libperl5.24 1,878 kB/2,850 kB 66%] [Waiting for headers] [Waiting for he
  758. 31% [2 libperl5.24 1,941 kB/2,850 kB 68%] [Waiting for headers] [5 linux-image-
  759. 41% [Waiting for headers] [Waiting for headers] [5 linux-image-next-mvebu 9,004
  760.  
  761. Get:8 http://security.debian.org stretch/updates/main armhf perl armhf 5.24.1-3+deb9u5 [219 kB]
  762.  
  763. 41% [Waiting for headers] [8 perl 0 B/219 kB 0%] [Waiting for headers] [5 linux
  764. 43% [Waiting for headers] [8 perl 146 kB/219 kB 67%] [5 linux-image-next-mvebu
  765.  
  766. 44% [Waiting for headers] [5 linux-image-next-mvebu 9,987 kB/14.1 MB 71%]
  767.  
  768. Get:10 http://security.debian.org stretch/updates/main armhf perl-base armhf 5.24.1-3+deb9u5 [1,239 kB]
  769.  
  770. 44% [Waiting for headers] [10 perl-base 0 B/1,239 kB 0%] [5 linux-image-next-mv
  771.  
  772. 56% [Waiting for headers] [10 perl-base 1,064 kB/1,239 kB 86%]
  773.  
  774. Get:11 http://192.168.0.126:8080 stretch/main armhf linux-stretch-root-next-helios4 armhf 5.72 [407 kB]
  775.  
  776. 56% [Waiting for headers] [10 perl-base 1,064 kB/1,239 kB 86%] [11 linux-stretc
  777.  
  778. 58% [Waiting for headers] [10 perl-base 1,171 kB/1,239 kB 95%]
  779.  
  780. Get:12 http://192.168.0.126:8080 stretch/main armhf linux-u-boot-helios4-next armhf 5.72 [257 kB]
  781.  
  782. 58% [Waiting for headers] [10 perl-base 1,171 kB/1,239 kB 95%] [12 linux-u-boot
  783.  
  784. 59% [Waiting for headers] [10 perl-base 1,239 kB/1,239 kB 100%]
  785.  
  786. 60% [Waiting for headers]
  787. 60% [Waiting for headers] [Waiting for headers]
  788. 60% [Waiting for headers] [Waiting for headers]
  789. 60% [Waiting for headers] [Waiting for headers]
  790. 60% [Waiting for headers] [Waiting for headers]
  791. 60% [Waiting for headers] [Waiting for headers]
  792. 60% [Waiting for headers] [Waiting for headers]
  793. 60% [Waiting for headers] [Waiting for headers] 3,985 kB/s 3s
  794. 60% [Waiting for headers] [Waiting for headers] 3,985 kB/s 3s
  795.  
  796. Get:7 http://cdn-fastly.deb.debian.org/debian stretch-updates/main armhf tzdata all 2018i-0+deb9u1 [273 kB]
  797.  
  798. 60% [7 tzdata 766 B/273 kB 0%] [Waiting for headers] 3,985 kB/s 3s
  799. 61% [Waiting for headers] 3,985 kB/s 3s
  800. 61% [Waiting for headers] 3,985 kB/s 3s
  801. 61% [Waiting for headers] 3,985 kB/s 3s
  802.  
  803. Get:13 http://security.debian.org stretch/updates/main armhf perl-modules-5.24 all 5.24.1-3+deb9u5 [2,722 kB]
  804.  
  805. 61% [13 perl-modules-5.24 725 B/2,722 kB 0%] 3,985 kB/s 3s
  806. 63% [13 perl-modules-5.24 926 kB/2,722 kB 34%] 3,985 kB/s 2s
  807.  
  808. Get:6 https://apt.armbian.com stretch/main armhf armbian-config all 5.72 [40.7 kB]
  809.  
  810. 65% [6 armbian-config 16.1 kB/40.7 kB 40%] [13 perl-modules-5.24 1,830 kB/2,722
  811. 66% [13 perl-modules-5.24 1,843 kB/2,722 kB 68%] 3,985 kB/s 2s
  812.  
  813. Get:9 https://apt.armbian.com stretch/main armhf linux-libc-dev armhf 5.70 [1,007 kB]
  814.  
  815. 67% [9 linux-libc-dev 16.1 kB/1,007 kB 2%] [13 perl-modules-5.24 2,548 kB/2,722
  816. 68% [9 linux-libc-dev 32.5 kB/1,007 kB 3%] 3,985 kB/s 2s
  817.  
  818. Get:14 http://security.debian.org stretch/updates/main armhf libsystemd0 armhf 232-25+deb9u8 [260 kB]
  819.  
  820.  
  821. 68% [9 linux-libc-dev 32.5 kB/1,007 kB 3%] [14 libsystemd0 4,245 B/260 kB 2%]
  822. 70% [9 linux-libc-dev 32.5 kB/1,007 kB 3%] 3,985 kB/s 2s
  823.  
  824. Get:15 http://security.debian.org stretch/updates/main armhf libnss-myhostname armhf 232-25+deb9u8 [103 kB]
  825.  
  826. 70% [9 linux-libc-dev 32.5 kB/1,007 kB 3%] [15 libnss-myhostname 823 B/103 kB 1
  827. 71% [9 linux-libc-dev 32.5 kB/1,007 kB 3%] 3,985 kB/s 2s
  828.  
  829. Get:16 http://security.debian.org stretch/updates/main armhf libpam-systemd armhf 232-25+deb9u8 [176 kB]
  830.  
  831. 71% [9 linux-libc-dev 32.5 kB/1,007 kB 3%] [16 libpam-systemd 2,232 B/176 kB 1%
  832. 72% [9 linux-libc-dev 98.0 kB/1,007 kB 10%] 3,985 kB/s 2s
  833.  
  834. Get:17 http://security.debian.org stretch/updates/main armhf systemd armhf 232-25+deb9u8 [2,274 kB]
  835.  
  836.  
  837. 72% [9 linux-libc-dev 98.0 kB/1,007 kB 10%] [17 systemd 1,368 B/2,274 kB 0%]
  838.  
  839. 74% [9 linux-libc-dev 295 kB/1,007 kB 29%] [17 systemd 934 kB/2,274 kB 41%]
  840. 76% [9 linux-libc-dev 524 kB/1,007 kB 52%] [17 systemd 1,586 kB/2,274 kB 70%]
  841. 79% [17 systemd 1,939 kB/2,274 kB 85%] 3,985 kB/s 1s
  842. 80% [Working] 3,985 kB/s 1s
  843.  
  844. Get:18 http://security.debian.org stretch/updates/main armhf udev armhf 232-25+deb9u8 [1,077 kB]
  845.  
  846. 80% [18 udev 3,526 B/1,077 kB 0%] 3,985 kB/s 1s
  847. 83% [Working] 3,985 kB/s 1s
  848.  
  849. Get:19 http://security.debian.org stretch/updates/main armhf libudev1 armhf 232-25+deb9u8 [120 kB]
  850.  
  851. 83% [19 libudev1 2,128 B/120 kB 2%] 3,985 kB/s 1s
  852. 84% [Working] 3,985 kB/s 1s
  853.  
  854. Get:20 http://security.debian.org stretch/updates/main armhf systemd-sysv armhf 232-25+deb9u8 [81.8 kB]
  855.  
  856. 84% [20 systemd-sysv 3,228 B/81.8 kB 4%] 3,985 kB/s 1s
  857. 85% [Working] 3,985 kB/s 1s
  858.  
  859. Get:21 http://security.debian.org stretch/updates/main armhf libssl1.0.2 armhf 1.0.2q-1~deb9u1 [922 kB]
  860.  
  861. 85% [21 libssl1.0.2 728 B/922 kB 0%] 3,985 kB/s 1s
  862. 88% [Working] 3,985 kB/s 0s
  863.  
  864. Get:22 http://security.debian.org stretch/updates/main armhf libssl-dev armhf 1.1.0j-1~deb9u1 [1,410 kB]
  865.  
  866. 88% [22 libssl-dev 2,014 B/1,410 kB 0%] 3,985 kB/s 0s
  867. 90% [22 libssl-dev 1,121 kB/1,410 kB 80%] 1,611 kB/s 1s
  868. 91% [Working] 1,611 kB/s 1s
  869.  
  870. Get:23 http://security.debian.org stretch/updates/main armhf libssl1.1 armhf 1.1.0j-1~deb9u1 [1,147 kB]
  871.  
  872. 91% [23 libssl1.1 2,126 B/1,147 kB 0%] 1,611 kB/s 1s
  873. 93% [23 libssl1.1 992 kB/1,147 kB 86%] 1,611 kB/s 0s
  874. 95% [Working] 1,611 kB/s 0s
  875.  
  876. Get:24 http://security.debian.org stretch/updates/main armhf policykit-1 armhf 0.105-18+deb9u1 [60.7 kB]
  877.  
  878. 95% [24 policykit-1 2,129 B/60.7 kB 4%] 1,611 kB/s 0s
  879. 95% [Working] 1,611 kB/s 0s
  880.  
  881. Get:25 http://security.debian.org stretch/updates/main armhf libpolkit-backend-1-0 armhf 0.105-18+deb9u1 [40.6 kB]
  882.  
  883. 95% [25 libpolkit-backend-1-0 729 B/40.6 kB 2%] 1,611 kB/s 0s
  884. 96% [Working] 1,611 kB/s 0s
  885.  
  886. Get:26 http://security.debian.org stretch/updates/main armhf libpolkit-agent-1-0 armhf 0.105-18+deb9u1 [22.3 kB]
  887.  
  888. 96% [26 libpolkit-agent-1-0 729 B/22.3 kB 3%] 1,611 kB/s 0s
  889. 97% [Working] 1,611 kB/s 0s
  890.  
  891. Get:27 http://security.debian.org stretch/updates/main armhf libpolkit-gobject-1-0 armhf 0.105-18+deb9u1 [38.4 kB]
  892.  
  893. 97% [27 libpolkit-gobject-1-0 3,476 B/38.4 kB 9%] 1,611 kB/s 0s
  894. 98% [Working] 1,611 kB/s 0s
  895.  
  896. Get:28 http://security.debian.org stretch/updates/main armhf openssl armhf 1.1.0j-1~deb9u1 [724 kB]
  897.  
  898. 98% [28 openssl 727 B/724 kB 0%] 1,611 kB/s 0s
  899. 100% [Working] 1,611 kB/s 0s
  900.  
  901. Fetched 37.3 MB in 13s (2,734 kB/s)
  902. Preconfiguring packages ...
  903. (Reading database ...
  904. (Reading database ... 5%
  905. (Reading database ... 10%
  906. (Reading database ... 15%
  907. (Reading database ... 20%
  908. (Reading database ... 25%
  909. (Reading database ... 30%
  910. (Reading database ... 35%
  911. (Reading database ... 40%
  912. (Reading database ... 45%
  913. (Reading database ... 50%
  914. (Reading database ... 55%
  915. (Reading database ... 60%
  916. (Reading database ... 65%
  917. (Reading database ... 70%
  918. (Reading database ... 75%
  919. (Reading database ... 80%
  920. (Reading database ... 85%
  921. (Reading database ... 90%
  922. (Reading database ... 95%
  923. (Reading database ... 100%
  924. (Reading database ... 31507 files and directories currently installed.)
  925. Preparing to unpack .../libperl5.24_5.24.1-3+deb9u5_armhf.deb ...
  926. Unpacking libperl5.24:armhf (5.24.1-3+deb9u5) over (5.24.1-3+deb9u4) ...
  927. Preparing to unpack .../perl_5.24.1-3+deb9u5_armhf.deb ...
  928. Unpacking perl (5.24.1-3+deb9u5) over (5.24.1-3+deb9u4) ...
  929. Preparing to unpack .../perl-base_5.24.1-3+deb9u5_armhf.deb ...
  930. Unpacking perl-base (5.24.1-3+deb9u5) over (5.24.1-3+deb9u4) ...
  931. Setting up perl-base (5.24.1-3+deb9u5) ...
  932. (Reading database ...
  933. (Reading database ... 5%
  934. (Reading database ... 10%
  935. (Reading database ... 15%
  936. (Reading database ... 20%
  937. (Reading database ... 25%
  938. (Reading database ... 30%
  939. (Reading database ... 35%
  940. (Reading database ... 40%
  941. (Reading database ... 45%
  942. (Reading database ... 50%
  943. (Reading database ... 55%
  944. (Reading database ... 60%
  945. (Reading database ... 65%
  946. (Reading database ... 70%
  947. (Reading database ... 75%
  948. (Reading database ... 80%
  949. (Reading database ... 85%
  950. (Reading database ... 90%
  951. (Reading database ... 95%
  952. (Reading database ... 100%
  953. (Reading database ... 31507 files and directories currently installed.)
  954. Preparing to unpack .../perl-modules-5.24_5.24.1-3+deb9u5_all.deb ...
  955. Unpacking perl-modules-5.24 (5.24.1-3+deb9u5) over (5.24.1-3+deb9u4) ...
  956. Preparing to unpack .../libsystemd0_232-25+deb9u8_armhf.deb ...
  957. Unpacking libsystemd0:armhf (232-25+deb9u8) over (232-25+deb9u6) ...
  958. Setting up libsystemd0:armhf (232-25+deb9u8) ...
  959. (Reading database ...
  960. (Reading database ... 5%
  961. (Reading database ... 10%
  962. (Reading database ... 15%
  963. (Reading database ... 20%
  964. (Reading database ... 25%
  965. (Reading database ... 30%
  966. (Reading database ... 35%
  967. (Reading database ... 40%
  968. (Reading database ... 45%
  969. (Reading database ... 50%
  970. (Reading database ... 55%
  971. (Reading database ... 60%
  972. (Reading database ... 65%
  973. (Reading database ... 70%
  974. (Reading database ... 75%
  975. (Reading database ... 80%
  976. (Reading database ... 85%
  977. (Reading database ... 90%
  978. (Reading database ... 95%
  979. (Reading database ... 100%
  980. (Reading database ... 31507 files and directories currently installed.)
  981. Preparing to unpack .../libnss-myhostname_232-25+deb9u8_armhf.deb ...
  982. Unpacking libnss-myhostname:armhf (232-25+deb9u8) over (232-25+deb9u6) ...
  983. Preparing to unpack .../libpam-systemd_232-25+deb9u8_armhf.deb ...
  984. Unpacking libpam-systemd:armhf (232-25+deb9u8) over (232-25+deb9u6) ...
  985. Preparing to unpack .../systemd_232-25+deb9u8_armhf.deb ...
  986. Unpacking systemd (232-25+deb9u8) over (232-25+deb9u6) ...
  987. Preparing to unpack .../udev_232-25+deb9u8_armhf.deb ...
  988. Unpacking udev (232-25+deb9u8) over (232-25+deb9u6) ...
  989. Preparing to unpack .../libudev1_232-25+deb9u8_armhf.deb ...
  990. Unpacking libudev1:armhf (232-25+deb9u8) over (232-25+deb9u6) ...
  991. Setting up libudev1:armhf (232-25+deb9u8) ...
  992. Setting up systemd (232-25+deb9u8) ...
  993. addgroup: The group `systemd-journal' already exists as a system group. Exiting.
  994. (Reading database ...
  995. (Reading database ... 5%
  996. (Reading database ... 10%
  997. (Reading database ... 15%
  998. (Reading database ... 20%
  999. (Reading database ... 25%
  1000. (Reading database ... 30%
  1001. (Reading database ... 35%
  1002. (Reading database ... 40%
  1003. (Reading database ... 45%
  1004. (Reading database ... 50%
  1005. (Reading database ... 55%
  1006. (Reading database ... 60%
  1007. (Reading database ... 65%
  1008. (Reading database ... 70%
  1009. (Reading database ... 75%
  1010. (Reading database ... 80%
  1011. (Reading database ... 85%
  1012. (Reading database ... 90%
  1013. (Reading database ... 95%
  1014. (Reading database ... 100%
  1015. (Reading database ... 31507 files and directories currently installed.)
  1016. Preparing to unpack .../00-systemd-sysv_232-25+deb9u8_armhf.deb ...
  1017. Unpacking systemd-sysv (232-25+deb9u8) over (232-25+deb9u6) ...
  1018. Preparing to unpack .../01-tzdata_2018i-0+deb9u1_all.deb ...
  1019. Unpacking tzdata (2018i-0+deb9u1) over (2018g-0+deb9u1) ...
  1020. Preparing to unpack .../02-libssl1.0.2_1.0.2q-1~deb9u1_armhf.deb ...
  1021. Unpacking libssl1.0.2:armhf (1.0.2q-1~deb9u1) over (1.0.2l-2+deb9u3) ...
  1022. Preparing to unpack .../03-libssl-dev_1.1.0j-1~deb9u1_armhf.deb ...
  1023. Unpacking libssl-dev:armhf (1.1.0j-1~deb9u1) over (1.1.0f-3+deb9u2) ...
  1024. Preparing to unpack .../04-libssl1.1_1.1.0j-1~deb9u1_armhf.deb ...
  1025. Unpacking libssl1.1:armhf (1.1.0j-1~deb9u1) over (1.1.0f-3+deb9u2) ...
  1026. Preparing to unpack .../05-armbian-config_5.72_all.deb ...
  1027. Unpacking armbian-config (5.72) over (5.67) ...
  1028. Preparing to unpack .../06-armbian-firmware_5.72_all.deb ...
  1029. Unpacking armbian-firmware (5.72) over (5.67) ...
  1030. Preparing to unpack .../07-armbian-tools-stretch_5.72_armhf.deb ...
  1031. Unpacking armbian-tools-stretch (5.72) over (5.67) ...
  1032. Preparing to unpack .../08-policykit-1_0.105-18+deb9u1_armhf.deb ...
  1033. Created symlink /run/systemd/system/polkit.service ? /dev/null.
  1034. Unpacking policykit-1 (0.105-18+deb9u1) over (0.105-18) ...
  1035. Preparing to unpack .../09-libpolkit-backend-1-0_0.105-18+deb9u1_armhf.deb ...
  1036. Unpacking libpolkit-backend-1-0:armhf (0.105-18+deb9u1) over (0.105-18) ...
  1037. Preparing to unpack .../10-libpolkit-agent-1-0_0.105-18+deb9u1_armhf.deb ...
  1038. Unpacking libpolkit-agent-1-0:armhf (0.105-18+deb9u1) over (0.105-18) ...
  1039. Preparing to unpack .../11-libpolkit-gobject-1-0_0.105-18+deb9u1_armhf.deb ...
  1040. Unpacking libpolkit-gobject-1-0:armhf (0.105-18+deb9u1) over (0.105-18) ...
  1041. Preparing to unpack .../12-linux-dtb-next-mvebu_5.72_armhf.deb ...
  1042. Unpacking linux-dtb-next-mvebu (5.72) over (5.67) ...
  1043. Preparing to unpack .../13-linux-image-next-mvebu_5.72_armhf.deb ...
  1044. update-initramfs: Deleting /boot/initrd.img-4.14.83-mvebu
  1045. Removing obsolete file uInitrd-4.14.83-mvebu
  1046. Unpacking linux-image-next-mvebu (5.72) over (5.67) ...
  1047. Preparing to unpack .../14-linux-libc-dev_5.70_armhf.deb ...
  1048. Unpacking linux-libc-dev (5.70) over (4.9.130-2) ...
  1049. Preparing to unpack .../15-linux-stretch-root-next-helios4_5.72_armhf.deb ...
  1050. Leaving 'diversion of /etc/mpv/mpv.conf to /etc/mpv/mpv-dist.conf by linux-stretch-root-next-helios4'
  1051. NOTE: You can find previous bootscript versions in /usr/share/armbian !
  1052. Unpacking linux-stretch-root-next-helios4 (5.72) over (5.67) ...
  1053. Preparing to unpack .../16-linux-u-boot-helios4-next_5.72_armhf.deb ...
  1054. Unpacking linux-u-boot-helios4-next (5.72) over (5.67) ...
  1055. Preparing to unpack .../17-openssl_1.1.0j-1~deb9u1_armhf.deb ...
  1056. Unpacking openssl (1.1.0j-1~deb9u1) over (1.1.0f-3+deb9u2) ...
  1057. Setting up perl-modules-5.24 (5.24.1-3+deb9u5) ...
  1058. Setting up libperl5.24:armhf (5.24.1-3+deb9u5) ...
  1059. Setting up armbian-config (5.72) ...
  1060. Setting up libnss-myhostname:armhf (232-25+deb9u8) ...
  1061. Setting up linux-image-next-mvebu (5.72) ...
  1062. update-initramfs: Generating /boot/initrd.img-4.14.94-mvebu
  1063. update-initramfs: Converting to u-boot format
  1064. Setting up tzdata (2018i-0+deb9u1) ...
  1065.  
  1066. Current default time zone: 'Etc/UTC'
  1067. Local time is now: Mon Jan 21 08:30:57 UTC 2019.
  1068. Universal Time is now: Mon Jan 21 08:30:57 UTC 2019.
  1069. Run 'dpkg-reconfigure tzdata' if you wish to change it.
  1070.  
  1071. Setting up systemd-sysv (232-25+deb9u8) ...
  1072. Setting up linux-stretch-root-next-helios4 (5.72) ...
  1073. Updating bootscript
  1074. Setting up linux-libc-dev (5.70) ...
  1075. Setting up armbian-firmware (5.72) ...
  1076. Processing triggers for initramfs-tools (0.130) ...
  1077. update-initramfs: Generating /boot/initrd.img-4.14.94-mvebu
  1078. update-initramfs: Converting to u-boot format
  1079. Setting up linux-u-boot-helios4-next (5.72) ...
  1080. Setting up perl (5.24.1-3+deb9u5) ...
  1081. Setting up libssl1.0.2:armhf (1.0.2q-1~deb9u1) ...
  1082. Processing triggers for libc-bin (2.24-11+deb9u3) ...
  1083. Setting up udev (232-25+deb9u8) ...
  1084. addgroup: The group `input' already exists as a system group. Exiting.
  1085. update-initramfs: deferring update (trigger activated)
  1086. Setting up libssl1.1:armhf (1.1.0j-1~deb9u1) ...
  1087. Processing triggers for systemd (232-25+deb9u8) ...
  1088. Setting up openssl (1.1.0j-1~deb9u1) ...
  1089. Processing triggers for man-db (2.7.6.1-2) ...
  1090. Processing triggers for dbus (1.10.26-0+deb9u1) ...
  1091. Setting up armbian-tools-stretch (5.72) ...
  1092. Setting up libpolkit-gobject-1-0:armhf (0.105-18+deb9u1) ...
  1093. Setting up linux-dtb-next-mvebu (5.72) ...
  1094. Setting up libpam-systemd:armhf (232-25+deb9u8) ...
  1095. Setting up libpolkit-agent-1-0:armhf (0.105-18+deb9u1) ...
  1096. Setting up libssl-dev:armhf (1.1.0j-1~deb9u1) ...
  1097. Setting up libpolkit-backend-1-0:armhf (0.105-18+deb9u1) ...
  1098. Setting up policykit-1 (0.105-18+deb9u1) ...
  1099. Removed /run/systemd/system/polkit.service.
  1100. Processing triggers for initramfs-tools (0.130) ...
  1101. update-initramfs: Generating /boot/initrd.img-4.14.94-mvebu
  1102. update-initramfs: Converting to u-boot format
  1103. Processing triggers for libc-bin (2.24-11+deb9u3) ...
  1104. root@helios4:~# ls -l /boot/boot*
  1105. -rw-r--r-- 1 root root 38518 Nov 26 08:32 /boot/boot.bmp
  1106. -rw-r--r-- 1 root root 2796 Nov 26 08:30 /boot/boot.cmd
  1107. -rw-r--r-- 1 root root 1907 Jan 21 08:30 /boot/boot.cmd.new
  1108. -rw-r--r-- 1 root root 4882 Nov 26 08:32 /boot/boot-desktop.png
  1109. -rw-rw-r-- 1 root root 2868 Nov 26 08:35 /boot/boot.scr
  1110. root@helios4:~# cat /boot/boot.cmd.new
  1111. # DO NOT EDIT THIS FILE
  1112. #
  1113. # Please edit /boot/armbianEnv.txt to set supported parameters
  1114. #
  1115.  
  1116. # default values
  1117. setenv rootdev "/dev/mmcblk0p1"
  1118. setenv rootfstype "ext4"
  1119. setenv verbosity "1"
  1120. setenv emmc_fix "off"
  1121. setenv spi_workaround "off"
  1122. setenv ethaddr "00:50:43:84:fb:2f"
  1123. setenv eth1addr "00:50:43:25:fb:84"
  1124. setenv eth2addr "00:50:43:84:25:2f"
  1125. setenv eth3addr "00:50:43:0d:19:18"
  1126.  
  1127. # fdtfile should come from compile-time u-boot patches
  1128. if test -z "${fdtfile}"; then
  1129. setenv fdtfile "armada-388-clearfog.dtb"
  1130. fi
  1131.  
  1132. test -z "${boot_interface}" && setenv boot_interface "mmc"
  1133.  
  1134. echo "Boot script loaded from ${boot_interface}"
  1135.  
  1136. if load ${boot_interface} 0:1 ${loadaddr} ${prefix}armbianEnv.txt; then
  1137. env import -t ${loadaddr} ${filesize}
  1138. fi
  1139.  
  1140. setenv bootargs "console=ttyS0,115200 root=${rootdev} rootwait rootfstype=${rootfstype} ubootdev=${boot_interface} scandelay loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
  1141.  
  1142. load ${boot_interface} 0:1 ${fdt_addr} ${prefix}dtb/${fdtfile}
  1143. load ${boot_interface} 0:1 ${ramdisk_addr_r} ${prefix}uInitrd
  1144. load ${boot_interface} 0:1 ${kernel_addr_r} ${prefix}zImage
  1145.  
  1146. setenv fdt_high 0xffffffff
  1147. setenv initrd_high 0xffffffff
  1148.  
  1149. # eMMC fix
  1150. if test "${emmc_fix}" = "on"; then
  1151. echo "Applying eMMC compatibility fix to the DT"
  1152. fdt addr ${fdt_addr}
  1153. fdt resize
  1154. fdt rm /soc/internal-regs/sdhci@d8000/ cd-gpios
  1155. fdt set /soc/internal-regs/sdhci@d8000/ non-removable
  1156. fi
  1157.  
  1158. # SPI - SATA workaround
  1159. if test "${spi_workaround}" = "on"; then
  1160. echo "Applying SPI workaround to the DT"
  1161. fdt addr ${fdt_addr}
  1162. fdt resize
  1163. fdt set /soc/internal-regs/sata@e0000 status "disabled"
  1164. fdt set /soc/internal-regs/sata@a8000 status "disabled"
  1165. fdt set /soc/spi@10680 status "okay"
  1166. fdt set /soc/spi@10680/spi-flash@0 status "okay"
  1167. fi
  1168.  
  1169. bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}
  1170.  
  1171. # Recompile with:
  1172. # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
  1173. root@helios4:~# nand-sata-install
  1174. Armbian for Helios4 install script, http://www.armbian.com
  1175. qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  1176.  
  1177. lqqqqqqqqqqqqqqqqqqqChoose an option:qqqqqqqqqqqqqqqqqqqqqqk xx x Current root: UUID=a362f746-9484-41fa-a62a-70779c43de4f x xx x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x x x 1 Boot from SD - system on SATA, USB or NVMe x x x x 5 Install/Update the bootloader on SD/eMMC x x x xx x x xx x x xx x x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj x tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu xx mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj < OK ><Cancel>1 Boot from SD - system on SATA, USB or NVMe5 Install/Update the bootloader on SD/eMMC
  1178. Armbian for Helios4 install script, http://www.armbian.com
  1179. qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  1180.  
  1181. lqqqqqqqqNAND, eMMC, SATA, USB and NVMe Armbian installer v5.72qqqqqqqqqqk
  1182. xx
  1183. xx
  1184. xx
  1185. xx
  1186. xx
  1187. xx
  1188. xx
  1189. xx
  1190. xx
  1191. xx
  1192. xx
  1193. xx
  1194. xx
  1195. tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu
  1196. x< Yes > < No >x
  1197. mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
  1198. __ __ __ ______ ___ __ ______ ___ __ ____
  1199. ¦¦ ¦¦ ¦¦¦¦ ¦¦¯¯¯¯¦¦ ¦¦¦ ¦¦ ¯¯¦¦¯¯ ¦¦¦ ¦¦ ¦¦¯¯¯¯¦
  1200. ¯¦_ ¦¦ _¦¯ ¦¦¦¦ ¦¦ ¦¦ ¦¦¯¦ ¦¦ ¦¦ ¦¦¯¦ ¦¦ ¦¦
  1201. ¦¦ ¦¦ ¦¦ ¦¦ ¦¦ ¦¦¦¦¦¦¦ ¦¦ ¦¦ ¦¦ ¦¦ ¦¦ ¦¦ ¦¦ ¦¦ ____
  1202. ¦¦¦¯¯¦¦¦ ¦¦¦¦¦¦ ¦¦ ¯¦¦_ ¦¦ ¦_¦¦ ¦¦ ¦¦ ¦_¦¦ ¦¦ ¯¯¦¦
  1203. ¦¦¦ ¦¦¦ _¦¦ ¦¦_ ¦¦ ¦¦ ¦¦ ¦¦¦ __¦¦__ ¦¦ ¦¦¦ ¦¦___¦¦
  1204. ¯¯¯ ¯¯¯ ¯¯ ¯¯ ¯¯ ¯¯¯ ¯¯ ¯¯¯ ¯¯¯¯¯¯ ¯¯ ¯¯¯ ¯¯¯¯
  1205.  
  1206.  
  1207.  
  1208. This script will update the bootloader on SD/eMMC. Continue?
  1209.  
  1210.  
  1211. Armbian for Helios4 install script, http://www.armbian.com
  1212. qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  1213.  
  1214.  
  1215.  
  1216.  
  1217.  
  1218. lqqqqWriting bootloaderqqqqqqk xx xx xx tqqqqqqqqqqqqqqqqqqqqqqqqqqqqu x < OK > x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Done.
  1219.  
  1220.  
  1221.  
  1222. root@helios4:~# cat /boot/boot.scr
  1223. 'V
  1224. $ÌE{í s# DO NOT EDIT THIS FILE
  1225. #
  1226. # Please edit /boot/armbianEnv.txt to set supported parameters
  1227. #
  1228.  
  1229. # default values
  1230. setenv rootdev "/dev/mmcblk0p1"
  1231. setenv rootfstype "ext4"
  1232. setenv verbosity "1"
  1233. setenv emmc_fix "off"
  1234. setenv spi_workaround "off"
  1235. setenv ethaddr "00:50:43:84:fb:2f"
  1236. setenv eth1addr "00:50:43:25:fb:84"
  1237. setenv eth2addr "00:50:43:84:25:2f"
  1238. setenv eth3addr "00:50:43:0d:19:18"
  1239.  
  1240. # fdtfile should come from compile-time u-boot patches
  1241. if test -z "${fdtfile}"; then
  1242. setenv fdtfile "armada-388-clearfog.dtb"
  1243. fi
  1244.  
  1245. test -z "${boot_interface}" && setenv boot_interface "mmc"
  1246.  
  1247. echo "Boot script loaded from ${boot_interface}"
  1248.  
  1249. if load ${boot_interface} 0:1 ${loadaddr} ${prefix}armbianEnv.txt; then
  1250. env import -t ${loadaddr} ${filesize}
  1251. fi
  1252.  
  1253. setenv bootargs "console=ttyS0,115200 root=${rootdev} rootwait rootfstype=${rootfstype} ubootdev=${boot_interface} scandelay loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
  1254.  
  1255. load ${boot_interface} 0:1 ${fdt_addr} ${prefix}dtb/${fdtfile}
  1256. load ${boot_interface} 0:1 ${ramdisk_addr_r} ${prefix}uInitrd
  1257. load ${boot_interface} 0:1 ${kernel_addr_r} ${prefix}zImage
  1258.  
  1259. setenv fdt_high 0xffffffff
  1260. setenv initrd_high 0xffffffff
  1261.  
  1262. # eMMC fix
  1263. if test "${emmc_fix}" = "on"; then
  1264. echo "Applying eMMC compatibility fix to the DT"
  1265. fdt addr ${fdt_addr}
  1266. fdt resize
  1267. fdt rm /soc/internal-regs/sdhci@d8000/ cd-gpios
  1268. fdt set /soc/internal-regs/sdhci@d8000/ non-removable
  1269. fi
  1270.  
  1271. # SPI - SATA workaround
  1272. if test "${spi_workaround}" = "on"; then
  1273. echo "Applying SPI workaround to the DT"
  1274. fdt addr ${fdt_addr}
  1275. fdt resize
  1276. fdt set /soc/internal-regs/sata@e0000 status "disabled"
  1277. fdt set /soc/internal-regs/sata@a8000 status "disabled"
  1278. fdt set /soc/spi@10680 status "okay"
  1279. fdt set /soc/spi@10680/spi-flash@0 status "okay"
  1280. fi
  1281.  
  1282. bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}
  1283.  
  1284. # Recompile with:
  1285. # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
  1286. root@helios4:~# reboot
  1287. Stopping Session 2 of user root.
  1288. [ OK ] Stopped target Timers.
  1289. [ OK ] Stopped Daily apt upgrade and clean activities.
  1290. [ OK ] Stopped Daily Cleanup of Temporary Directories.
  1291. [ OK ] Stopped Daily apt download activities.
  1292. Stopping User Manager for UID 0...
  1293. Stopping Authorization Manager...
  1294. [ OK ] Stopped target System Time Synchronized.
  1295. [ OK ] Stopped target Graphical Interface.
  1296. [ OK ] Stopped target Multi-User System.
  1297. Stopping Regular background program processing daemon...
  1298. Stopping OpenBSD Secure Shell server...
  1299. [ OK ] Stopped target Login Prompts.
  1300. Stopping Serial Getty on ttyS0...
  1301. Stopping Getty on tty1...
  1302. Stopping fan speed regulator...
  1303. Stopping Unattended Upgrades Shutdown...
  1304. Stopping System Logging Service...
  1305. Stopping LSB: Advanced IEEE 802.11 management daemon...
  1306. Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
  1307. Stopping LSB: Start NTP daemon...
  1308. Stopping LSB: Start/stop sysstat's sadc...
  1309. [ OK ] Stopped System Logging Service.
  1310. [ OK ] Stopped Regular background program processing daemon.
  1311. [ OK ] Stopped fan speed regulator.
  1312. [ OK ] Stopped OpenBSD Secure Shell server.
  1313. [ OK ] Stopped Serial Getty on ttyS0.
  1314. [ OK ] Stopped Getty on tty1.
  1315. [ OK ] Stopped User Manager for UID 0.
  1316. [ OK ] Stopped Authorization Manager.
  1317. [ OK ] Stopped Session 2 of user root.
  1318. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon.
  1319. [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
  1320. Stopping LSB: set CPUFreq kernel parameters...
  1321. [ OK ] Removed slice User Slice of root.
  1322. Stopping Login Service...
  1323. [ OK ] Removed slice system-getty.slice.
  1324. Stopping Permit User Sessions...
  1325. [ OK ] Removed slice system-serial\x2dgetty.slice.
  1326. [ OK ] Stopped /etc/rc.local Compatibility.
  1327. [ OK ] Stopped Login Service.
  1328. [ OK ] Stopped Unattended Upgrades Shutdown.
  1329. [ OK ] Stopped LSB: Start NTP daemon.
  1330. [ OK ] Stopped LSB: Start/stop sysstat's sadc.
  1331. [ OK ] Stopped Permit User Sessions.
  1332. [ OK ] Stopped target Network is Online.
  1333. [ OK ] Stopped Network Manager Wait Online.
  1334. [ OK ] Stopped target Network.
  1335. Stopping Network Manager...
  1336. Stopping Raise network interfaces...
  1337. [ OK ] Stopped LSB: set CPUFreq kernel parameters.
  1338. Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
  1339. [ OK ] Stopped Network Manager.
  1340. [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
  1341. [ OK ] Stopped target Remote File Systems.
  1342. Stopping D-Bus System Message Bus...
  1343. [ OK ] Stopped D-Bus System Message Bus.
  1344. [ OK ] Stopped Raise network interfaces.
  1345. [ OK ] Stopped target Basic System.
  1346. [ OK ] Stopped target Slices.
  1347. [ OK ] Removed slice User and Session Slice.
  1348. [ OK ] Stopped target Sockets.
  1349. [ OK ] Closed Syslog Socket.
  1350. [ OK ] Stopped target Paths.
  1351. [ OK ] Closed D-Bus System Message Bus Socket.
  1352. [ OK ] Stopped target System Initialization.
  1353. Stopping Entropy daemon using the HAVEGE algorithm...
  1354. Stopping Restore / save the current clock...
  1355. [ OK ] Stopped target Swap.
  1356. Deactivating swap /dev/zram2...
  1357. Deactivating swap /dev/zram1...
  1358. Stopping Armbian memory supported logging...
  1359. [ OK ] Stopped target Encrypted Volumes.
  1360. [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
  1361. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
  1362. [ OK ] Stopped Apply Kernel Variables.
  1363. [ OK ] Stopped Load Kernel Modules.
  1364. Stopping Update UTMP about System Boot/Shutdown...
  1365. [ OK ] Stopped Entropy daemon using the HAVEGE algorithm.
  1366. [ OK ] Stopped Restore / save the current clock.
  1367. [ OK ] Deactivated swap /dev/zram2.
  1368. [ OK ] Deactivated swap /dev/zram1.
  1369. Stopping Load/Save Random Seed...
  1370. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  1371. [ OK ] Stopped Create Volatile Files and Directories.
  1372. [ OK ] Stopped Load/Save Random Seed.
  1373. [ OK ] Unmounted /var/log.
  1374. [ OK ] Unmounted /var/log.hdd.
  1375. [ OK ] Stopped Armbian memory supported logging.
  1376. Stopping Armbian ZRAM config...
  1377. [ OK ] Stopped Armbian ZRAM config.
  1378. [ OK ] Stopped target Local File Systems.
  1379. Unmounting /run/user/0...
  1380. Unmounting /tmp...
  1381. [ OK ] Unmounted /run/user/0.
  1382. [ OK ] Unmounted /tmp.
  1383. [ OK ] Reached target Unmount All Filesystems.
  1384. [ OK ] Stopped target Local File Systems (Pre).
  1385. [ OK ] Stopped Remount Root and Kernel File Systems.
  1386. [ OK ] Stopped Create Static Device Nodes in /dev.
  1387. [ OK ] Reached target Shutdown.
  1388. [ 507.151207] watchdog: watchdog0: watchdog did not stop!
  1389. [ 507.330877] reboot: Restarting system
  1390.  
  1391. U-Boot SPL 2018.11-armbian (Jan 20 2019 - 20:02:45 -0800)
  1392. High speed PHY - Version: 2.0
  1393. Detected Device ID 6828
  1394. board SerDes lanes topology details:
  1395. | Lane # | Speed | Type |
  1396. --------------------------------
  1397. | 0 | 6 | SATA0 |
  1398. | 1 | 5 | USB3 HOST0 |
  1399. | 2 | 6 | SATA1 |
  1400. | 3 | 6 | SATA3 |
  1401. | 4 | 6 | SATA2 |
  1402. | 5 | 5 | USB3 HOST1 |
  1403. --------------------------------
  1404. High speed PHY - Ended Successfully
  1405. mv_ddr: mv_ddr-armada-17.10.4
  1406. DDR3 Training Sequence - Switching XBAR Window to FastPath Window
  1407. DDR Training Sequence - Start scrubbing
  1408. DDR3 Training Sequence - End scrubbing
  1409. mv_ddr: completed successfully
  1410. Trying to boot from MMC1
  1411.  
  1412.  
  1413. U-Boot 2018.11-armbian (Jan 20 2019 - 20:02:45 -0800)
  1414.  
  1415. SoC: MV88F6828-A0 at 1600 MHz
  1416. DRAM: 2 GiB (800 MHz, 32-bit, ECC enabled)
  1417. MMC: mv_sdh: 0
  1418. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  1419.  
  1420. Model: Helios4
  1421. Board: Helios4
  1422. SCSI: MVEBU SATA INIT
  1423. Target spinup took 0 ms.
  1424. Target spinup took 0 ms.
  1425. AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  1426. flags: 64bit ncq led only pmp fbss pio slum part sxs
  1427.  
  1428. Net:
  1429. Warning: ethernet@70000 (eth1) using random MAC address - ea:74:c6:ed:56:b8
  1430. eth1: ethernet@70000
  1431. Hit any key to stop autoboot: 3 2 1 0
  1432. switch to partitions #0, OK
  1433. mmc0 is current device
  1434. Scanning mmc 0:1...
  1435. Found U-Boot script /boot/boot.scr
  1436. 1979 bytes read in 103 ms (18.6 KiB/s)
  1437. ## Executing script at 03000000
  1438. Boot script loaded from mmc
  1439. 207 bytes read in 82 ms (2 KiB/s)
  1440. 19512 bytes read in 280 ms (67.4 KiB/s)
  1441. 4707725 bytes read in 883 ms (5.1 MiB/s)
  1442. 5457160 bytes read in 1029 ms (5.1 MiB/s)
  1443. ## Loading init Ramdisk from Legacy Image at 02880000 ...
  1444. Image Name: uInitrd
  1445. Created: 2019-01-21 8:31:39 UTC
  1446. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  1447. Data Size: 4707661 Bytes = 4.5 MiB
  1448. Load Address: 00000000
  1449. Entry Point: 00000000
  1450. Verifying Checksum ... OK
  1451. ## Flattened Device Tree blob at 02040000
  1452. Booting using the fdt blob at 0x2040000
  1453. Using Device Tree in place at 02040000, end 02047c37
  1454.  
  1455. Starting kernel ...
  1456.  
  1457. Uncompressing Linux... done, booting the kernel.
  1458. Loading, please wait...
  1459. starting version 232
  1460. Begin: Loading essential drivers ... done.
  1461. Begin: Running /scripts/init-premount ... done.
  1462. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  1463. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  1464. done.
  1465. Begin: Will now check root file system ... fsck from util-linux 2.29.2
  1466. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  1467. /dev/mmcblk0p1: clean, 36461/952000 files, 295618/3868496 blocks
  1468. done.
  1469. done.
  1470. Begin: Running /scripts/local-bottom ... done.
  1471. Begin: Running /scripts/init-bottom ... done.
  1472.  
  1473. Welcome to Debian GNU/Linux 9 (stretch)!
  1474.  
  1475. [ OK ] Reached target Swap.
  1476. [ OK ] Listening on udev Kernel Socket.
  1477. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
  1478. [ OK ] Listening on Journal Socket.
  1479. [ OK ] Listening on Syslog Socket.
  1480. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  1481. [ OK ] Listening on Journal Socket (/dev/log).
  1482. [ OK ] Reached target Remote File Systems.
  1483. [ OK ] Listening on udev Control Socket.
  1484. [ OK ] Listening on Journal Audit Socket.
  1485. [ OK ] Created slice System Slice.
  1486. Starting Restore / save the current clock...
  1487. Starting Nameserver information manager...
  1488. Starting Journal Service...
  1489. Starting Set the console keyboard layout...
  1490. Mounting POSIX Message Queue File System...
  1491. Mounting Debug File System...
  1492. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  1493. [ OK ] Reached target Paths.
  1494. Starting Create list of required st…ce nodes for the current kernel...
  1495. Starting Load Kernel Modules...
  1496. [ OK ] Listening on fsck to fsckd communication Socket.
  1497. Starting Remount Root and Kernel File Systems...
  1498. [ OK ] Reached target Encrypted Volumes.
  1499. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  1500. [ OK ] Created slice system-serial\x2dgetty.slice.
  1501. [ OK ] Created slice system-getty.slice.
  1502. [ OK ] Created slice User and Session Slice.
  1503. [ OK ] Reached target Slices.
  1504. [ OK ] Mounted Debug File System.
  1505. [ OK ] Mounted POSIX Message Queue File System.
  1506. [ OK ] Started Journal Service.
  1507. [ OK ] Started Restore / save the current clock.
  1508. [ OK ] Started Set the console keyboard layout.
  1509. [ OK ] Started Create list of required sta…vice nodes for the current kernel.
  1510. [ OK ] Started Load Kernel Modules.
  1511. [ OK ] Started Remount Root and Kernel File Systems.
  1512. [ OK ] Started Nameserver information manager.
  1513. Starting Load/Save Random Seed...
  1514. Starting udev Coldplug all Devices...
  1515. Starting Apply Kernel Variables...
  1516. Mounting FUSE Control File System...
  1517. Starting Create Static Device Nodes in /dev...
  1518. Starting Flush Journal to Persistent Storage...
  1519. [ OK ] Mounted FUSE Control File System.
  1520. [ OK ] Started Load/Save Random Seed.
  1521. [ OK ] Started Apply Kernel Variables.
  1522. [ OK ] Started Create Static Device Nodes in /dev.
  1523. [ OK ] Reached target Local File Systems (Pre).
  1524. Mounting /tmp...
  1525. Starting udev Kernel Device Manager...
  1526. [ OK ] Mounted /tmp.
  1527. [ OK ] Reached target Local File Systems.
  1528. Starting Raise network interfaces...
  1529. Starting Armbian ZRAM config...
  1530. Starting Set console font and keymap...
  1531. [ OK ] Started Flush Journal to Persistent Storage.
  1532. [ OK ] Started udev Kernel Device Manager.
  1533. [ OK ] Started Set console font and keymap.
  1534. Starting Create Volatile Files and Directories...
  1535. [ OK ] Started udev Coldplug all Devices.
  1536. [ OK ] Started Create Volatile Files and Directories.
  1537. [ OK ] Reached target System Time Synchronized.
  1538. Starting Update UTMP about System Boot/Shutdown...
  1539. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  1540. [ OK ] Started Update UTMP about System Boot/Shutdown.
  1541. [ OK ] Found device /dev/ttyS0.
  1542. [ OK ] Started Armbian ZRAM config.
  1543. [ OK ] Started Raise network interfaces.
  1544. Starting Armbian memory supported logging...
  1545. [ OK ] Started Armbian memory supported logging.
  1546. [ OK ] Reached target System Initialization.
  1547. Starting Armbian hardware monitoring...
  1548. [ OK ] Started Daily apt download activities.
  1549. [ OK ] Started Daily apt upgrade and clean activities.
  1550. [ OK ] Listening on D-Bus System Message Bus Socket.
  1551. [ OK ] Reached target Sockets.
  1552. [ OK ] Started Daily Cleanup of Temporary Directories.
  1553. [ OK ] Reached target Timers.
  1554. Starting Armbian hardware optimization...
  1555. [ OK ] Started Armbian hardware monitoring.
  1556. [ OK ] Started Armbian hardware optimization.
  1557. [ OK ] Reached target Basic System.
  1558. Starting Login Service...
  1559. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  1560. [ OK ] Started D-Bus System Message Bus.
  1561. Starting LSB: Start/stop sysstat's sadc...
  1562. [ OK ] Started Regular background program processing daemon.
  1563. Starting System Logging Service...
  1564. Starting Network Manager...
  1565. Starting fan speed regulator...
  1566. [ OK ] Started System Logging Service.
  1567. [ OK ] Started LSB: Start/stop sysstat's sadc.
  1568. [ OK ] Started Login Service.
  1569. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  1570. Starting LSB: set CPUFreq kernel parameters...
  1571. [ OK ] Started LSB: set CPUFreq kernel parameters.
  1572. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  1573. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  1574. [ OK ] Started fan speed regulator.
  1575. [ OK ] Started Network Manager.
  1576. Starting Network Manager Script Dispatcher Service...
  1577. [ OK ] Reached target Network.
  1578. [ OK ] Started Unattended Upgrades Shutdown.
  1579. Starting OpenBSD Secure Shell server...
  1580. Starting Permit User Sessions...
  1581. Starting Network Manager Wait Online...
  1582. [ OK ] Started Permit User Sessions.
  1583. [ OK ] Started Network Manager Script Dispatcher Service.
  1584. Starting Hostname Service...
  1585. [ OK ] Started Hostname Service.
  1586. [ OK ] Started OpenBSD Secure Shell server.
  1587. Starting Authorization Manager...
  1588. [ OK ] Started Authorization Manager.
  1589. [ OK ] Started Network Manager Wait Online.
  1590. [ OK ] Reached target Network is Online.
  1591. Starting LSB: Advanced IEEE 802.11 management daemon...
  1592. Starting LSB: Start NTP daemon...
  1593. Starting /etc/rc.local Compatibility...
  1594. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  1595. [ OK ] Started /etc/rc.local Compatibility.
  1596. [ OK ] Started Getty on tty1.
  1597. [ OK ] Started Serial Getty on ttyS0.
  1598. [ OK ] Reached target Login Prompts.
  1599. [ OK ] Started LSB: Start NTP daemon.
  1600. [ OK ] Reached target Multi-User System.
  1601. [ OK ] Reached target Graphical Interface.
  1602. Starting Update UTMP about System Runlevel Changes...
  1603. [ OK ] Started Update UTMP about System Runlevel Changes.
  1604.  
  1605.  
  1606. Debian GNU/Linux 9 helios4 ttyS0
  1607.  
  1608. helios4 login: root
  1609.  
  1610. Password:
  1611. Last login: Mon Jan 21 08:27:00 UTC 2019 on ttyS0
  1612. _ _ _ _ _ _
  1613. | | | | ___| (_) ___ ___| || |
  1614. | |_| |/ _ \ | |/ _ \/ __| || |_
  1615. | _ | __/ | | (_) \__ \__ _|
  1616. |_| |_|\___|_|_|\___/|___/ |_|
  1617.  
  1618.  
  1619. Welcome to ARMBIAN 5.72 user-built Debian GNU/Linux 9 (stretch) 4.14.94-mvebu
  1620. System load: 0.18 0.06 0.02 Up time: 0 min
  1621. Memory usage: 2 % of 2018MB IP: 192.168.0.176
  1622. CPU temp: 71°C Ambient temp: 41°C
  1623. Usage of /: 7% of 15G
  1624.  
  1625. New to Armbian? Check the documentation first: https://docs.armbian.com
  1626.  
  1627. root@helios4:~# poweroff
  1628. [ OK ] Stopped target Timers.
  1629. Stopping Authorization Manager...
  1630. [ OK ] Stopped target Graphical Interface.
  1631. [ OK ] Stopped target Multi-User System.
  1632. Stopping Regular background program processing daemon...
  1633. Stopping Unattended Upgrades Shutdown...
  1634. [ OK ] Stopped target Login Prompts.
  1635. Stopping LSB: Advanced IEEE 802.11 management daemon...
  1636. Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
  1637. Stopping System Logging Service...
  1638. [ OK ] Stopped Daily apt upgrade and clean activities.
  1639. Stopping L Stopping Serial Getty on ttyS0...
  1640. Stopping User Manager for UID 0...
  1641. Stopping OpenBSD Secure Shell server...
  1642. Stopping fan speed regulator...
  1643. [ OK ] Stopped Daily Cleanup of Temporary Directories.
  1644. [ OK ] Stopped Daily apt download activities.
  1645. [ OK ] Stopped target System Time Synchronized.
  1646. Stopping LSB: Start NTP daemon...
  1647. [ OK ] Stopped Session 3 of user root.
  1648. Stopping Getty on tty1...
  1649. [ OK ] Stopped Regular background program processing daemon.
  1650. [ OK ] Stopped System Logging Service.
  1651. [ OK ] Stopped fan speed regulator.
  1652. [ OK ] Stopped OpenBSD Secure Shell server.
  1653. [ OK ] Stopped Authorization Manager.
  1654. [ OK ] Stopped Getty on tty1.
  1655. [ OK ] Stopped Serial Getty on ttyS0.
  1656. [ OK ] Stopped User Manager for UID 0.
  1657. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon.
  1658. [ OK ] Stopped Unattended Upgrades Shutdown.
  1659. [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
  1660. [ OK ] Stopped LSB: Start/stop sysstat's sadc.
  1661. [ OK ] Stopped LSB: Start NTP daemon.
  1662. Stopping LSB: set CPUFreq kernel parameters...
  1663. [ OK ] Removed slice User Slice of root.
  1664. Stopping Login Service...
  1665. [ OK ] Removed slice system-serial\x2dgetty.slice.
  1666. [ OK ] Removed slice system-getty.slice.
  1667. Stopping Permit User Sessions...
  1668. [ OK ] Stopped /etc/rc.local Compatibility.
  1669. [ OK ] Stopped target Network is Online.
  1670. [ OK ] Stopped Network Manager Wait Online.
  1671. [ OK ] Stopped Login Service.
  1672. [ OK ] Stopped Permit User Sessions.
  1673. [ OK ] Stopped target Network.
  1674. Stopping Raise network interfaces...
  1675. Stopping Network Manager...
  1676. [ OK ] Stopped LSB: set CPUFreq kernel parameters.
  1677. Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
  1678. [ OK ] Stopped Network Manager.
  1679. Stopping D-Bus System Message Bus...
  1680. [ OK ] Stopped D-Bus System Message Bus.
  1681. [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
  1682. [ OK ] Stopped Raise network interfaces.
  1683. [ OK ] Stopped target Remote File Systems.
  1684. [ OK ] Stopped target Basic System.
  1685. [ OK ] Stopped target Slices.
  1686. [ OK ] Removed slice User and Session Slice.
  1687. [ OK ] Stopped target Sockets.
  1688. [ OK ] Closed Syslog Socket.
  1689. [ OK ] Stopped target Paths.
  1690. [ OK ] Closed D-Bus System Message Bus Socket.
  1691. [ OK ] Stopped target System Initialization.
  1692. Stopping Entropy daemon using the HAVEGE algorithm...
  1693. Stopping Armbian memory supported logging...
  1694. [ OK ] Stopped Apply Kernel Variables.
  1695. [ OK ] Stopped Load Kernel Modules.
  1696. Stopping Restore / save the current clock...
  1697. [ OK ] Stopped target Encrypted Volumes.
  1698. [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
  1699. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
  1700. [ OK ] Stopped target Swap.
  1701. Deactivating swap /dev/zram2...
  1702. Deactivating swap /dev/zram1...
  1703. Stopping Update UTMP about System Boot/Shutdown...
  1704. [ OK ] Stopped Entropy daemon using the HAVEGE algorithm.
  1705. [ OK ] Stopped Restore / save the current clock.
  1706. [ OK ] Deactivated swap /dev/zram2.
  1707. [ OK ] Deactivated swap /dev/zram1.
  1708. [ OK ] Unmounted /var/log.
  1709. [ OK ] Unmounted /var/log.hdd.
  1710. [ OK ] Stopped Armbian memory supported logging.
  1711. Stopping Armbian ZRAM config...
  1712. Stopping Load/Save Random Seed...
  1713. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  1714. [ OK ] Stopped Armbian ZRAM config.
  1715. [ OK ] Stopped Load/Save Random Seed.
  1716. [ OK ] Stopped Create Volatile Files and Directories.
  1717. [ OK ] Stopped target Local File Systems.
  1718. Unmounting /run/user/0...
  1719. Unmounting /tmp...
  1720. [ OK ] Unmounted /run/user/0.
  1721. [ OK ] Unmounted /tmp.
  1722. [ OK ] Reached target Unmount All Filesystems.
  1723. [ OK ] Stopped target Local File Systems (Pre).
  1724. [ OK ] Stopped Remount Root and Kernel File Systems.
  1725. [ OK ] Stopped Create Static Device Nodes in /dev.
  1726. [ OK ] Reached target Shutdown.
  1727. [ 65.165105] reboot: System halted
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!