API tools faq
paste
Advertisement
Guest User

after_update

a guest
Oct 25th, 2018
129
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.72 KB | None | 0 0
raw download clone embed print report
  1. NOTICE: Booting Trusted Firmware
  2. NOTICE: BL1: v1.3(release):devel-17.08.1:627667b
  3. NOTICE: BL1: Built : 14:40:36, Oct 4 2NOTICE: BL2: v1.3(release):devel-17.08.1:627667b
  4. NOTICE: BL2: Built : 14:40:36, Oct 4 2017
  5. NNOTICE: BL31: v1.3(release):devel-17.08.1:627667b
  6. NOTICE: BL31:
  7.  
  8. U-Boot 2017.03-armada-17.10.1-g440395a (Sep 25 2017 - 15:43:51 +0200)
  9.  
  10. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  11. CPU @ 1000 [MHz]
  12. L2 @ 800 [MHz]
  13. TClock @ 200 [MHz]
  14. DDR @ 800 [MHz]
  15. DRAM: 2 GiB
  16. U-Boot DT blob at : 000000007f7182d8
  17. Comphy-0: USB3 5 Gbps
  18. Comphy-1: PEX0 2.5 Gbps
  19. Comphy-2: SATA0 6 Gbps
  20. SATA link 0 timeout.
  21. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  22. flags: ncq led only pmp fbss pio slum part sxs
  23. PCIE-0: Link up
  24. MMC: sdhci@d0000: 0
  25. SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  26. Net: eth0: neta@30000 [PRIME]
  27. Hit any key to stop autoboot: 0
  28. switch to partitions #0, OK
  29. mmc0 is current device
  30. 759 bytes read in 20 ms (36.1 KiB/s)
  31. 15895040 bytes read in 17687 ms (877 KiB/s)
  32. 8425 bytes read in 23 ms (357.4 KiB/s)
  33. 6222766 bytes read in 272 ms (21.8 MiB/s)
  34. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  35. Image Name: Ramdisk Image
  36. Image Type: AArch64 Linux RAMDisk Image (uncompressed)
  37. Data Size: 6222702 Bytes = 5.9 MiB
  38. Load Address: 00000000
  39. Entry Point: 00000000
  40. Verifying Checksum ... OK
  41. ## Flattened Device Tree blob at 01000000
  42. Booting using the fdt blob at 0x1000000
  43. Loading Ramdisk to 7f127000, end 7f71636e ... OK
  44. Using Device Tree in place at 0000000001000000, end 00000000010050e8
  45.  
  46. Starting kernel ...
  47.  
  48. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  49. [ 0.000000] Linux version 4.18.14-1-ARCH (builduser@leming) (gcc version 8.2.0 (GCC)) #1 SMP Sat Oct 13 18:35:28 MDT 2018
  50. [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
  51. [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
  52. [ 0.000000] bootconsole [ar3700_uart0] enabled
  53. [ 0.000000] efi: Getting EFI parameters from FDT:
  54. [ 0.000000] efi: UEFI not found.
  55. [ 0.000000] cma: Reserved 64 MiB at 0x000000007b000000
  56. [ 0.000000] psci: probing for conduit method from DT.
  57. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  58. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  59. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  60. [ 0.000000] psci: SMC Calling Convention v1.0
  61. [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4a4 with crng_init=0
  62. [ 0.000000] percpu: Embedded 24 pages/cpu @(____ptrval____) s58520 r8192 d31592 u98304
  63. [ 0.000000] Detected VIPT I-cache on CPU0
  64. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  65. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
  66. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p1 rw rootwait
  67. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  69. [ 0.000000] Memory: 1973580K/2097152K available (8252K kernel code, 1314K rwdata, 4944K rodata, 960K init, 256K bss, 58036K reserved, 65536K cma-reserved)
  70. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  71. [ 0.000000] ftrace: allocating 33174 entries in 130 pages
  72. [ 0.000000] Hierarchical RCU implementation.
  73. [ 0.000000] Tasks RCU enabled.
  74. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  75. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  76. [ 0.000000] GICv3: Distributor has no Range Selector support
  77. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  78. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
  79. [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
  80. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  81. [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  82. [ 0.008480] Console: colour dummy device 80x25
  83. [ 0.012987] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000)
  84. [ 0.023640] pid_max: default: 32768 minimum: 301
  85. [ 0.028523] Security Framework initialized
  86. [ 0.032717] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  87. [ 0.039578] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  88. [ 0.048342] ASID allocator initialised with 32768 entries
  89. [ 0.053957] Hierarchical SRCU implementation.
  90. [ 0.059707] EFI services will not be available.
  91. [ 0.064681] smp: Bringing up secondary CPUs ...
  92. [ 0.069797] Detected VIPT I-cache on CPU1
  93. [ 0.069831] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
  94. [ 0.069871] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  95. [ 0.069981] smp: Brought up 1 node, 2 CPUs
  96. [ 0.092042] SMP: Total of 2 processors activated.
  97. [ 0.096874] CPU features: detected: GIC system register CPU interface
  98. [ 0.103510] CPU features: detected: 32-bit EL0 Support
  99. [ 0.113149] CPU: All CPU(s) started at EL2
  100. [ 0.117302] alternatives: patching kernel code
  101. [ 0.123420] devtmpfs: initialized
  102. [ 0.129215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  103. [ 0.139309] futex hash table entries: 512 (order: 3, 32768 bytes)
  104. [ 0.148143] pinctrl core: initialized pinctrl subsystem
  105. [ 0.154012] DMI not present or invalid.
  106. [ 0.158236] NET: Registered protocol family 16
  107. [ 0.163115] audit: initializing netlink subsys (disabled)
  108. [ 0.168822] audit: type=2000 audit(0.130:1): state=initialized audit_enabled=0 res=1
  109. [ 0.176958] cpuidle: using governor ladder
  110. [ 0.181203] cpuidle: using governor menu
  111. [ 0.185302] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  112. [ 0.192858] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  113. [ 0.201146] DMA: preallocated 256 KiB pool for atomic allocations
  114. [ 0.207527] Serial: AMBA PL011 UART driver
  115. [ 0.212806] mvebu-uart d0012000.serial: could not find pctldev for node /soc/internal-regs@d0000000/pinctrl@13800/uart1-pins, deferring probe
  116. [ 0.233918] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  117. [ 0.241064] cryptd: max_cpu_qlen set to 1000
  118. [ 0.246700] SCSI subsystem initialized
  119. [ 0.250698] usbcore: registered new interface driver usbfs
  120. [ 0.256360] usbcore: registered new interface driver hub
  121. [ 0.261814] usbcore: registered new device driver usb
  122. [ 0.268114] NetLabel: Initializing
  123. [ 0.271533] NetLabel: domain hash size = 128
  124. [ 0.276012] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  125. [ 0.281932] NetLabel: unlabeled traffic allowed by default
  126. [ 0.287969] clocksource: Switched to clocksource arch_sys_counter
  127. [ 0.383116] VFS: Disk quotas dquot_6.6.0
  128. [ 0.387135] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  129. [ 0.400742] NET: Registered protocol family 2
  130. [ 0.405728] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  131. [ 0.413830] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  132. [ 0.421327] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  133. [ 0.428343] TCP: Hash tables configured (established 16384 bind 16384)
  134. [ 0.435174] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  135. [ 0.441351] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  136. [ 0.448151] NET: Registered protocol family 1
  137. [ 0.453129] RPC: Registered named UNIX socket transport module.
  138. [ 0.459196] RPC: Registered udp transport module.
  139. [ 0.463983] RPC: Registered tcp transport module.
  140. [ 0.468837] RPC: Registered tcp NFSv4.1 backchannel transport module.
  141. [ 0.475653] Unpacking initramfs...
  142. [ 0.774120] Freeing initrd memory: 6076K
  143. [ 0.778666] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  144. [ 0.786752] kvm [1]: 8-bit VMID
  145. [ 0.791043] kvm [1]: vgic-v2@d1da0000
  146. [ 0.794760] kvm [1]: GIC system register CPU interface enabled
  147. [ 0.800804] kvm [1]: vgic interrupt IRQ1
  148. [ 0.804839] kvm [1]: Hyp mode initialized successfully
  149. [ 0.811424] Initialise system trusted keyrings
  150. [ 0.816121] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  151. [ 0.826446] zbud: loaded
  152. [ 0.830843] NFS: Registering the id_resolver key type
  153. [ 0.835984] Key type id_resolver registered
  154. [ 0.840320] Key type id_legacy registered
  155. [ 0.844397] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  156. [ 0.851977] pstore: using deflate compression
  157. [ 2.377810] Key type asymmetric registered
  158. [ 2.381990] Asymmetric key parser 'x509' registered
  159. [ 2.387167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  160. [ 2.395004] io scheduler noop registered
  161. [ 2.398977] io scheduler deadline registered
  162. [ 2.403512] io scheduler cfq registered (default)
  163. [ 2.408338] io scheduler mq-deadline registered
  164. [ 2.412928] io scheduler kyber registered
  165. [ 2.417162] io scheduler bfq registered
  166. [ 2.421253] atomic64_test: passed
  167. [ 2.427904] advk-pcie d0070000.pcie: host bridge /soc/pcie@d0070000 ranges:
  168. [ 2.435069] advk-pcie d0070000.pcie: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
  169. [ 2.442566] advk-pcie d0070000.pcie: IO 0xe9000000..0xe900ffff -> 0xe9000000
  170. [ 2.550120] advk-pcie d0070000.pcie: link up
  171. [ 2.554600] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
  172. [ 2.560995] pci_bus 0000:00: root bus resource [bus 00-ff]
  173. [ 2.566619] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
  174. [ 2.573709] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
  175. [ 2.584794] pci 0000:00:00.0: BAR 0: assigned [mem 0xe8000000-0xe807ffff 64bit]
  176. [ 2.592284] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8080000-0xe808ffff pref]
  177. [ 2.601092] mv_xor d0060900.xor: Marvell shared XOR driver
  178. [ 2.668837] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  179. [ 2.738795] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  180. [ 2.746916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  181. [ 2.754608] cacheinfo: Unable to detect cache hierarchy for CPU 0
  182. [ 2.761388] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  183. [ 2.770665] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
  184. [ 2.780152] scsi host0: ahci-mvebu
  185. [ 2.783854] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e1fff] port 0x100 irq 21
  186. [ 2.795996] random: fast init done
  187. [ 2.805885] m25p80 spi0.0: w25q32dw (4096 Kbytes)
  188. [ 2.818672] libphy: Fixed MDIO Bus: probed
  189. [ 2.823006] libphy: orion_mdio_bus: probed
  190. [ 2.828609] mvneta d0030000.ethernet eth0: Using device tree mac address 00:51:82:11:22:00
  191. [ 2.837130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  192. [ 2.843822] ehci-pci: EHCI PCI platform driver
  193. [ 2.848408] ehci-platform: EHCI generic platform driver
  194. [ 2.853808] ehci-orion: EHCI orion driver
  195. [ 2.858016] orion-ehci d005e000.usb: EHCI Host Controller
  196. [ 2.863525] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  197. [ 2.871820] orion-ehci d005e000.usb: irq 13, io mem 0xd005e000
  198. [ 2.897980] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  199. [ 2.904211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  200. [ 2.912663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  201. [ 2.920091] usb usb1: Product: EHCI Host Controller
  202. [ 2.925098] usb usb1: Manufacturer: Linux 4.18.14-1-ARCH ehci_hcd
  203. [ 2.931379] usb usb1: SerialNumber: d005e000.usb
  204. [ 2.936629] hub 1-0:1.0: USB hub found
  205. [ 2.940452] hub 1-0:1.0: 1 port detected
  206. [ 2.945190] xhci-hcd d0058000.usb: xHCI Host Controller
  207. [ 2.950538] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
  208. [ 2.958801] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x0000000000010010
  209. [ 2.968221] xhci-hcd d0058000.usb: irq 12, io mem 0xd0058000
  210. [ 2.974290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  211. [ 2.982744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  212. [ 2.990168] usb usb2: Product: xHCI Host Controller
  213. [ 2.995177] usb usb2: Manufacturer: Linux 4.18.14-1-ARCH xhci-hcd
  214. [ 3.001458] usb usb2: SerialNumber: d0058000.usb
  215. [ 3.006709] hub 2-0:1.0: USB hub found
  216. [ 3.010525] hub 2-0:1.0: 1 port detected
  217. [ 3.014819] xhci-hcd d0058000.usb: xHCI Host Controller
  218. [ 3.020148] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
  219. [ 3.027744] xhci-hcd d0058000.usb: Host supports USB 3.0 SuperSpeed
  220. [ 3.034346] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  221. [ 3.042721] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
  222. [ 3.051172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  223. [ 3.058600] usb usb3: Product: xHCI Host Controller
  224. [ 3.063608] usb usb3: Manufacturer: Linux 4.18.14-1-ARCH xhci-hcd
  225. [ 3.069888] usb usb3: SerialNumber: d0058000.usb
  226. [ 3.075185] hub 3-0:1.0: USB hub found
  227. [ 3.079002] hub 3-0:1.0: 1 port detected
  228. [ 3.083444] usbcore: registered new interface driver uas
  229. [ 3.088951] usbcore: registered new interface driver usb-storage
  230. [ 3.095075] usbcore: registered new interface driver ums-cypress
  231. [ 3.101269] usbcore: registered new interface driver ums_eneub6250
  232. [ 3.107618] usbcore: registered new interface driver ums-freecom
  233. [ 3.113812] usbcore: registered new interface driver ums-isd200
  234. [ 3.119345] ata1: SATA link down (SStatus 0 SControl 300)
  235. [ 3.120022] usbcore: registered new interface driver ums-usbat
  236. [ 3.132146] device-mapper: uevent: version 1.0.3
  237. [ 3.137127] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  238. [ 3.146048] sdhci: Secure Digital Host Controller Interface driver
  239. [ 3.152338] sdhci: Copyright(c) Pierre Ossman
  240. [ 3.156808] sdhci-pltfm: SDHCI platform and OF driver helper
  241. [ 3.162906] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  242. [ 3.168196] ledtrig-cpu: registered to indicate activity on CPUs
  243. [ 3.174462] hidraw: raw HID events driver (C) Jiri Kosina
  244. [ 3.180082] usbcore: registered new interface driver usbhid
  245. [ 3.185734] usbhid: USB HID core driver
  246. [ 3.190440] drop_monitor: Initializing network drop monitor service
  247. [ 3.197032] Initializing XFRM netlink socket
  248. [ 3.201390] NET: Registered protocol family 17
  249. [ 3.206155] Key type dns_resolver registered
  250. [ 3.211158] registered taskstats version 1
  251. [ 3.215291] Loading compiled-in X.509 certificates
  252. [ 3.220333] zswap: loaded using pool lzo/zbud
  253. [ 3.233514] Key type big_key registered
  254. [ 3.245317] Key type encrypted registered
  255. [ 3.251547] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0, base_baud = 1562500) is a mvebu-uart
  256. [ 3.261034] console [ttyMV0] enabled
  257. [ 3.261034] console [ttyMV0] enabled
  258. [ 3.268327] bootconsole [ar3700_uart0] disabled
  259. [ 3.268327] bootconsole [ar3700_uart0] disabled
  260. [ 3.278839] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  261. [ 3.310808] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  262. [ 3.315700] hctosys: unable to open [ 3.324870] Freeing unused kernel memory: 960K
  263. [ 3.355793] mmc0: new high speed SDHC card at address 0001
  264. [ 3.359884] mmcblk0: mmc0:0001 ASTC 7.44 GiB
  265. [ 3.365185] mmcblk0: p1
  266. :: running early hook [udev]
  267. starting version 239
  268. :: running hook [udev]
  269. :: Triggering uevents...
  270. :: performing fsck on '/dev/mmcblk0p1'
  271. /dev/mmcblk0p1: clean, 70207/487680 files, 959371/1947873 blocks
  272. :: mounting '/dev/mmcblk0p1' on real root
  273. [ 4.316908] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  274. :: running cleanup hook [udev]
  275. [ 5.350890] systemd[1]: System time before build time, advancing clock.
  276. [ 5.513304] NET: Registered protocol family 10
  277. [ 5.545272] Segment Routing with IPv6
  278. [ 5.586567] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  279. [ 5.606297] systemd[1]: Detected architecture arm64.
  280.  
  281. Welcome to Arch Linux ARM!
  282.  
  283. [ 5.650261] systemd[1]: Set hostname to <alarm>.
  284. [ 6.752736] random: systemd: uninitialized urandom read (16 bytes read)
  285. [ 6.756987] systemd[1]: Listening on initctl Compatibility Named Pipe.
  286. [ OK ] Listening on initctl Compatibility Named Pipe.
  287. [ 6.798250] random: systemd: uninitialized urandom read (16 bytes read)
  288. [ 6.802515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  289. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  290. [ 6.838394] random: systemd: uninitialized urandom read (16 bytes read)
  291. [ 6.842735] systemd[1]: Listening on Journal Audit Socket.
  292. [ OK ] Listening on Journal Audit Socket.
  293. [ 6.878734] systemd[1]: Listening on Journal Socket.
  294. [ OK ] Listening on Journal Socket.
  295. [ 6.919416] systemd[1]: Listening on udev Kernel Socket.
  296. [ OK ] Listening on udev Kernel Socket.
  297. [ 6.962601] systemd[1]: Listening on Process Core Dump Socket.
  298. [ OK ] Listening on Process Core Dump Socket.
  299. [ 7.000464] systemd[1]: Created slice User and Session Slice.
  300. [ OK ] Created slice User and Session Slice.
  301. Mounting Kernel Debug File System...
  302. [ OK ] Listening on Network Service Netlink Socket.
  303. [ OK ] Created slice system-serial\x2dgetty.slice.
  304. [ OK ] Created slice system-macspoof.slice.
  305. [ OK ] Created slice system-getty.slice.
  306. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
  307. [ OK ] Listening on LVM2 metadata daemon socket.
  308. Mounting Huge Pages File System...
  309. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  310. [ OK ] Reached target Paths.
  311. Mounting POSIX Message Queue File System...
  312. [ OK ] Listening on LVM2 poll daemon socket.
  313. [ OK ] Reached target Slices.
  314. Mounting Kernel Configuration File System...
  315. [ OK ] Listening on Device-mapper event daemon FIFOs.
  316. [ OK ] Listening on udev Control Socket.
  317. Starting udev Coldplug all Devices...
  318. [ OK ] Reached target Remote File Systems.
  319. [ OK ] Reached target Local Encrypted Volumes.
  320. [ OK ] Reached target Swap.
  321. Mounting Temporary Directory (/tmp)...
  322. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling...
  323. [ OK ] Listening on Journal Socket (/dev/log).
  324. Starting Journal Service...
  325. Starting Create list of required st…ce nodes for the current kernel...
  326. Starting Apply Kernel Variables...
  327. Starting Remount Root and Kernel File Systems...
  328. [ OK ] Mounted Kernel Debug File System.
  329. [ OK ] Mounted Huge Pages File System.
  330. [ OK ] Mounted POSIX Message Queue File System.
  331. [ OK ] Mounted Kernel Configuration File System.
  332. [ OK ] Started Journal Service.
  333. [ 8.008720] audit: type=1130 audit(1536962858.650:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  334. [ OK ] Mounted Temporary Directory (/tmp).
  335. [ OK ] Started Create list of required sta…vice nodes for the current kernel.
  336. [ 8.101256] audit: type=1130 audit(1536962858.740:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  337. [ OK ] Started Apply Kernel Variables.
  338. [ 8.148326] audit: type=1130 audit(1536962858.790:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  339. [ OK ] Started Remount Root and Kernel File Systems.
  340. [ 8.198286] audit: type=1130 audit(1536962858.840:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  341. [ OK ] Started udev Coldplug all Devices.
  342. [ 8.248323] audit: type=1130 audit(1536962858.890:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  343. [ OK ] Started LVM2 metadata daemon.
  344. [ 8.298381] audit: type=1130 audit(1536962858.940:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  345. Starting Load/Save Random Seed...
  346. Starting Create Static Device Nodes in /dev...
  347. Starting Flush Journal to Persistent Storage...
  348. [ OK ] Started Load/Save Random Seed.
  349. [ 8.428409] audit: type=1130 audit(1536962859.070:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  350. [ 8.448814] systemd-journald[176]: Received request to flush runtime journal from PID 1
  351. [ 8.492882] systemd-journald[176]: File /var/log/journal/1563e2fbd123427bb03de683b3b02249/system.journal corrupted or uncleanly shut down, renaming and replacing.
  352. [ OK ] Started Create Static Device Nodes in /dev.
  353. [ 8.624912] audit: type=1130 audit(1536962859.260:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  354. Starting udev Kernel Device Manager...
  355. [ OK ] Started udev Kernel Device Manager.
  356. [ 9.250121] audit: type=1130 audit(1536962859.890:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  357. [ OK ] Started Flush Journal to Persistent Storage.
  358. [ 9.388376] audit: type=1130 audit(1536962860.030:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  359. [ OK ] Found device /dev/ttyMV0.
  360. [ 9.782926] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  361. [ 9.823851] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  362. [ 9.916410] mv88e6085 d0032004.mdio-mii:01: switch 0x3410 detected: Marvell 88E6341, revision 0
  363. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  364. [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd[ 10.014397] libphy: mdio: probed
  365. or progress polling.
  366. [ OK ] Reached target Local File Systems (Pre).
  367. [ OK ] Reached target Local File Systems.
  368. [ 10.112425] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  369. Starting Create Volatile Files and Directories...
  370. [ OK ] Started Create Volatile Files and Directories.
  371. Starting Network Time Synchronization...
  372. [ 10.310983] ath: phy0: WB335 1-ANT card detected
  373. [ 10.312940] ath: phy0: Set BT/WLAN RX diversity capability
  374. [ 10.327386] ath: phy0: Enable LNA combining
  375. Starting Update UTMP about System Boot/Shutdown...
  376. [ 10.358920] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff000009f80000, irq=68
  377. Starting Entropy Harvesting Daemon...
  378. [ 10.410863] ath9k 0000:00:00.0 wlp0s0: renamed from wlan0
  379. Starting Load/Save RF Kill Switch Status...
  380. [ OK ] Started Update UTMP about System Boot/Shutdown.
  381. [ OK ] Started Load/Save RF Kill Switch Status.
  382. [ OK ] Started Entropy Harvesting Daemon.
  383. [ OK ] Started Network Time Synchronization.
  384. [ OK ] Reached target System Time Synchronized.
  385. [ OK ] Reached target System Initialization.
  386. [ OK ] Started Daily verification of password and group files.
  387. [ OK ] Started Daily man-db cache update.
  388. [ OK ] Listening on D-Bus System Message Bus Socket.
  389. [ OK ] Reached target Sockets.
  390. [ OK ] Reached target Basic System.
  391. [ OK ] Started D-Bus System Message Bus.
  392. [ 11.040600] mv88e6085 d0032004.mdio-mii:01 wan (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:11] driver [Marvell 88E6390]
  393. Starting Login Service...
  394. [ OK ] Started Daily rotation of log files.
  395. [ 11.180253] mv88e6085 d0032004.mdio-mii:01 lan0 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:12] driver [Marvell 88E6390]
  396. [ OK ] Started Daily Cleanup of Temporary Directories.
  397. [ OK ] Reached target Timers.
  398. [ 11.290285] mv88e6085 d0032004.mdio-mii:01 lan1 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:13] driver [Marvell 88E6390]
  399. [ 11.304946] DSA: tree 0 setup
  400. [ 12.050979] random: crng init done
  401. [ 12.051637] random: 7 urandom warning(s) missed due to ratelimiting
  402. [ OK ] Started Login Service.
  403. [ 14.388224] kauditd_printk_skb: 8 callbacks suppressed
  404. [ 14.388233] audit: type=1130 audit(1540471939.172:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  405. [ OK ] Found device /sys/subsystem/net/devices/wan.
  406. Starting MAC Address Change wan...
  407. [ OK ] Started MAC Address Change wan.
  408. [ 14.588970] audit: type=1130 audit(1540471939.382:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=macspoof@wan comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  409. [ 14.605340] audit: type=1131 audit(1540471939.382:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=macspoof@wan comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  410. [ OK ] Reached target Network (Pre).
  411. Starting Network Service...
  412. [ OK ] Found device /sys/subsystem/net/devices/br0.
  413. [ 14.850217] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
  414. [ 14.856747] br0: port 1(lan1) entered blocking state
  415. [ 14.859120] br0: port 1(lan1) entered disabled state
  416. [ 14.866382] device lan1 entered promiscuous mode
  417. [ 14.869028] device eth0 entered promiscuous mode
  418. [ 14.869070] audit: type=1700 audit(1540471939.642:23): dev=lan1 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
  419. [ 14.878513] br0: port 2(lan0) entered blocking state
  420. [ 14.890879] br0: port 2(lan0) entered disabled state
  421. [ 14.893503] audit: type=1700 audit(1540471939.642:23): dev=eth0 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
  422. [ 14.899512] device lan0 entered promiscuous mode
  423. [ 14.911905] audit: type=1300 audit(1540471939.642:23): arch=c00000b7 syscall=206 success=yes exit=40 a0=3 a1=aaaafb6bdf40 a2=28 a3=0 items=0 ppid=1 pid=288 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=193 tty=(none) ses=4294967295 comm="systemd-network" exe="/usr/lib/systemd/systemd-networkd" key=(null)
  424. [[ 14.944586] audit: type=1327 audit(1540471939.642:23): proctitle="/usr/lib/systemd/systemd-networkd"
  425. OK[ 14.954345] audit: type=1700 audit(1540471939.672:24): dev=lan0 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
  426. [ 14.966662] audit: type=1300 audit(1540471939.672:24): arch=c00000b7 syscall=206 success=yes exit=40 a0=3 a1=aaaafb6beef0 a2=28 a3=0 items=0 ppid=1 pid=288 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=193 tty=(none) ses=4294967295 comm="systemd-network" exe="/usr/lib/systemd/systemd-networkd" key=(null)
  427. [ 14.997938] mvneta d0030000.ethernet eth0: configuring for fixed/rgmii-id link mode
  428. [ 14.998002] audit: type=1327 audit(1540471939.672:24): proctitle="/usr/lib/systemd/systemd-networkd"
  429. [0[ 15.007657] mvneta d0030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  430. m] Started Network Service.
  431. Starting Network Name Resolution...
  432. [ 15.069751] mv88e6085 d0032004.mdio-mii:01 lan1: configuring for phy/ link mode
  433. [ 15.074707] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready
  434. [ 15.083120] mv88e6085 d0032004.mdio-mii:01 lan0: configuring for phy/ link mode
  435. [ 15.088348] IPv6: ADDRCONF(NETDEV_UP): lan0: link is not ready
  436. [ 15.097030] mv88e6085 d0032004.mdio-mii:01 wan: configuring for phy/ link mode
  437. [ 15.103397] IPv6: ADDRCONF(NETDEV_UP): wan: link is not ready
  438. [ OK ] Started Network Name Resolution.
  439. [ OK ] Reached target Host and Network Name Lookups.
  440. [ OK ] Reached target Network.
  441. Starting A lightweight DHCP and caching DNS server...
  442. Starting Permit User Sessions...
  443. [ OK ] Started OpenSSH Daemon.
  444. [ OK ] Started Permit User Sessions.
  445. [ OK ] Started Serial Getty on ttyMV0.
  446. [ OK ] Started Getty on tty1.
  447. [ OK ] Reached target Login Prompts.
  448. [ 18.445878] mv88e6085 d0032004.mdio-mii:01 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  449. [ 18.451773] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  450. Starting Hostname Service...
  451. [ OK ] Started Hostname Service.
  452.  
  453. Arch Linux 4.18.14-1-ARCH (ttyMV0)
  454.  
  455. alarm login: root
  456. Password: [ 48.981392] kauditd_printk_skb: 8 callbacks suppressed
  457. [ 48.981400] audit: type=1131 audit(1540472011.855:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  458.  
  459. [ 49.672152] audit: type=1006 audit(1540472012.545:34): pid=298 uid=0 old-auid=4294967295 auid=0 tty=ttyMV0 old-ses=4294967295 ses=1 res=1
  460. [ 49.738082] audit: type=1130 audit(1540472012.605:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  461. [ 49.799111] audit: type=1006 audit(1540472012.675:36): pid=306 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
  462. [ 50.094567] audit: type=1130 audit(1540472012.965:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  463. Last login: Thu Oct 25 12:48:54 on ttyMV0
  464. [root@alarm ~]# lspci
  465. 00:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
  466. [root@alarm ~]# iwconfig
  467. wlp0s0 IEEE 802.11 ESSID:off/any
  468. Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
  469. Retry short limit:7 RTS thr:off Fragment thr:off
  470. Encryption key:off
  471. Power Management:off
  472.  
  473. eth0 no wireless extensions.
  474.  
  475. lan1 no wireless extensions.
  476.  
  477. lo no wireless extensions.
  478.  
  479. lan0 no wireless extensions.
  480.  
  481. br0 no wireless extensions.
  482.  
  483. wan no wireless extensions.
  484.  
  485. [root@alarm ~]# uname -a
  486. Linux alarm 4.18.14-1-ARCH #1 SMP Sat Oct 13 18:35:28 MDT 2018 aarch64 GNU/Linux
  487. [root@alarm ~]# dmesg
  488. [ 2.843822] ehci-pci: EHCI PCI platform driver
  489. [ 2.848408] ehci-platform: EHCI generic platform driver
  490. [ 2.853808] ehci-orion: EHCI orion driver
  491. [ 2.858016] orion-ehci d005e000.usb: EHCI Host Controller
  492. [ 2.863525] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  493. [ 2.871820] orion-ehci d005e000.usb: irq 13, io mem 0xd005e000
  494. [ 2.897980] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  495. [ 2.904211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  496. [ 2.912663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  497. [ 2.920091] usb usb1: Product: EHCI Host Controller
  498. [ 2.925098] usb usb1: Manufacturer: Linux 4.18.14-1-ARCH ehci_hcd
  499. [ 2.931379] usb usb1: SerialNumber: d005e000.usb
  500. [ 2.936629] hub 1-0:1.0: USB hub found
  501. [ 2.940452] hub 1-0:1.0: 1 port detected
  502. [ 2.945190] xhci-hcd d0058000.usb: xHCI Host Controller
  503. [ 2.950538] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
  504. [ 2.958801] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x0000000000010010
  505. [ 2.968221] xhci-hcd d0058000.usb: irq 12, io mem 0xd0058000
  506. [ 2.974290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
  507. [ 2.982744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  508. [ 2.990168] usb usb2: Product: xHCI Host Controller
  509. [ 2.995177] usb usb2: Manufacturer: Linux 4.18.14-1-ARCH xhci-hcd
  510. [ 3.001458] usb usb2: SerialNumber: d0058000.usb
  511. [ 3.006709] hub 2-0:1.0: USB hub found
  512. [ 3.010525] hub 2-0:1.0: 1 port detected
  513. [ 3.014819] xhci-hcd d0058000.usb: xHCI Host Controller
  514. [ 3.020148] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
  515. [ 3.027744] xhci-hcd d0058000.usb: Host supports USB 3.0 SuperSpeed
  516. [ 3.034346] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  517. [ 3.042721] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
  518. [ 3.051172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  519. [ 3.058600] usb usb3: Product: xHCI Host Controller
  520. [ 3.063608] usb usb3: Manufacturer: Linux 4.18.14-1-ARCH xhci-hcd
  521. [ 3.069888] usb usb3: SerialNumber: d0058000.usb
  522. [ 3.075185] hub 3-0:1.0: USB hub found
  523. [ 3.079002] hub 3-0:1.0: 1 port detected
  524. [ 3.083444] usbcore: registered new interface driver uas
  525. [ 3.088951] usbcore: registered new interface driver usb-storage
  526. [ 3.095075] usbcore: registered new interface driver ums-cypress
  527. [ 3.101269] usbcore: registered new interface driver ums_eneub6250
  528. [ 3.107618] usbcore: registered new interface driver ums-freecom
  529. [ 3.113812] usbcore: registered new interface driver ums-isd200
  530. [ 3.119345] ata1: SATA link down (SStatus 0 SControl 300)
  531. [ 3.120022] usbcore: registered new interface driver ums-usbat
  532. [ 3.132146] device-mapper: uevent: version 1.0.3
  533. [ 3.137127] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  534. [ 3.146048] sdhci: Secure Digital Host Controller Interface driver
  535. [ 3.152338] sdhci: Copyright(c) Pierre Ossman
  536. [ 3.156808] sdhci-pltfm: SDHCI platform and OF driver helper
  537. [ 3.162906] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  538. [ 3.168196] ledtrig-cpu: registered to indicate activity on CPUs
  539. [ 3.174462] hidraw: raw HID events driver (C) Jiri Kosina
  540. [ 3.180082] usbcore: registered new interface driver usbhid
  541. [ 3.185734] usbhid: USB HID core driver
  542. [ 3.190440] drop_monitor: Initializing network drop monitor service
  543. [ 3.197032] Initializing XFRM netlink socket
  544. [ 3.201390] NET: Registered protocol family 17
  545. [ 3.206155] Key type dns_resolver registered
  546. [ 3.211158] registered taskstats version 1
  547. [ 3.215291] Loading compiled-in X.509 certificates
  548. [ 3.220333] zswap: loaded using pool lzo/zbud
  549. [ 3.233514] Key type big_key registered
  550. [ 3.245317] Key type encrypted registered
  551. [ 3.251547] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0, base_baud = 1562500) is a mvebu-uart
  552. [ 3.261034] console [ttyMV0] enabled
  553. [ 3.268327] bootconsole [ar3700_uart0] disabled
  554. [ 3.278839] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  555. [ 3.310808] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  556. [ 3.315700] hctosys: unable to open rtc device (rtc0)
  557. [ 3.324870] Freeing unused kernel memory: 960K
  558. [ 3.355793] mmc0: new high speed SDHC card at address 0001
  559. [ 3.359884] mmcblk0: mmc0:0001 ASTC 7.44 GiB
  560. [ 3.365185] mmcblk0: p1
  561. [ 4.316908] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  562. [ 5.350890] systemd[1]: System time before build time, advancing clock.
  563. [ 5.513304] NET: Registered protocol family 10
  564. [ 5.545272] Segment Routing with IPv6
  565. [ 5.586567] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  566. [ 5.606297] systemd[1]: Detected architecture arm64.
  567. [ 5.650261] systemd[1]: Set hostname to <alarm>.
  568. [ 6.752736] random: systemd: uninitialized urandom read (16 bytes read)
  569. [ 6.756987] systemd[1]: Listening on initctl Compatibility Named Pipe.
  570. [ 6.798250] random: systemd: uninitialized urandom read (16 bytes read)
  571. [ 6.802515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  572. [ 6.838394] random: systemd: uninitialized urandom read (16 bytes read)
  573. [ 6.842735] systemd[1]: Listening on Journal Audit Socket.
  574. [ 6.878734] systemd[1]: Listening on Journal Socket.
  575. [ 6.919416] systemd[1]: Listening on udev Kernel Socket.
  576. [ 6.962601] systemd[1]: Listening on Process Core Dump Socket.
  577. [ 7.000464] systemd[1]: Created slice User and Session Slice.
  578. [ 8.008720] audit: type=1130 audit(1536962858.650:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  579. [ 8.101256] audit: type=1130 audit(1536962858.740:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  580. [ 8.148326] audit: type=1130 audit(1536962858.790:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  581. [ 8.198286] audit: type=1130 audit(1536962858.840:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  582. [ 8.248323] audit: type=1130 audit(1536962858.890:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  583. [ 8.298381] audit: type=1130 audit(1536962858.940:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  584. [ 8.428409] audit: type=1130 audit(1536962859.070:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  585. [ 8.448814] systemd-journald[176]: Received request to flush runtime journal from PID 1
  586. [ 8.492882] systemd-journald[176]: File /var/log/journal/1563e2fbd123427bb03de683b3b02249/system.journal corrupted or uncleanly shut down, renaming and replacing.
  587. [ 8.624912] audit: type=1130 audit(1536962859.260:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  588. [ 9.250121] audit: type=1130 audit(1536962859.890:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  589. [ 9.388376] audit: type=1130 audit(1536962860.030:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  590. [ 9.782926] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  591. [ 9.823851] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  592. [ 9.916410] mv88e6085 d0032004.mdio-mii:01: switch 0x3410 detected: Marvell 88E6341, revision 0
  593. [ 10.014397] libphy: mdio: probed
  594. [ 10.112425] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  595. [ 10.310983] ath: phy0: WB335 1-ANT card detected
  596. [ 10.312940] ath: phy0: Set BT/WLAN RX diversity capability
  597. [ 10.327386] ath: phy0: Enable LNA combining
  598. [ 10.330118] ath: EEPROM regdomain: 0x60
  599. [ 10.330122] ath: EEPROM indicates we should expect a direct regpair map
  600. [ 10.330131] ath: Country alpha2 being used: 00
  601. [ 10.330133] ath: Regpair used: 0x60
  602. [ 10.357487] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  603. [ 10.358920] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff000009f80000, irq=68
  604. [ 10.410863] ath9k 0000:00:00.0 wlp0s0: renamed from wlan0
  605. [ 11.040600] mv88e6085 d0032004.mdio-mii:01 wan (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:11] driver [Marvell 88E6390]
  606. [ 11.180253] mv88e6085 d0032004.mdio-mii:01 lan0 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:12] driver [Marvell 88E6390]
  607. [ 11.290285] mv88e6085 d0032004.mdio-mii:01 lan1 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:13] driver [Marvell 88E6390]
  608. [ 11.304946] DSA: tree 0 setup
  609. [ 12.050979] random: crng init done
  610. [ 12.051637] random: 7 urandom warning(s) missed due to ratelimiting
  611. [ 14.388224] kauditd_printk_skb: 8 callbacks suppressed
  612. [ 14.388233] audit: type=1130 audit(1540471939.172:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  613. [ 14.588970] audit: type=1130 audit(1540471939.382:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=macspoof@wan comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  614. [ 14.605340] audit: type=1131 audit(1540471939.382:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=macspoof@wan comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  615. [ 14.850217] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
  616. [ 14.856747] br0: port 1(lan1) entered blocking state
  617. [ 14.859120] br0: port 1(lan1) entered disabled state
  618. [ 14.866382] device lan1 entered promiscuous mode
  619. [ 14.869028] device eth0 entered promiscuous mode
  620. [ 14.869070] audit: type=1700 audit(1540471939.642:23): dev=lan1 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
  621. [ 14.878513] br0: port 2(lan0) entered blocking state
  622. [ 14.890879] br0: port 2(lan0) entered disabled state
  623. [ 14.893503] audit: type=1700 audit(1540471939.642:23): dev=eth0 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
  624. [ 14.899512] device lan0 entered promiscuous mode
  625. [ 14.911905] audit: type=1300 audit(1540471939.642:23): arch=c00000b7 syscall=206 success=yes exit=40 a0=3 a1=aaaafb6bdf40 a2=28 a3=0 items=0 ppid=1 pid=288 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=193 tty=(none) ses=4294967295 comm="systemd-network" exe="/usr/lib/systemd/systemd-networkd" key=(null)
  626. [ 14.944586] audit: type=1327 audit(1540471939.642:23): proctitle="/usr/lib/systemd/systemd-networkd"
  627. [ 14.954345] audit: type=1700 audit(1540471939.672:24): dev=lan0 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
  628. [ 14.966662] audit: type=1300 audit(1540471939.672:24): arch=c00000b7 syscall=206 success=yes exit=40 a0=3 a1=aaaafb6beef0 a2=28 a3=0 items=0 ppid=1 pid=288 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=193 tty=(none) ses=4294967295 comm="systemd-network" exe="/usr/lib/systemd/systemd-networkd" key=(null)
  629. [ 14.997938] mvneta d0030000.ethernet eth0: configuring for fixed/rgmii-id link mode
  630. [ 14.998002] audit: type=1327 audit(1540471939.672:24): proctitle="/usr/lib/systemd/systemd-networkd"
  631. [ 15.007657] mvneta d0030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  632. [ 15.069751] mv88e6085 d0032004.mdio-mii:01 lan1: configuring for phy/ link mode
  633. [ 15.074707] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready
  634. [ 15.083120] mv88e6085 d0032004.mdio-mii:01 lan0: configuring for phy/ link mode
  635. [ 15.088348] IPv6: ADDRCONF(NETDEV_UP): lan0: link is not ready
  636. [ 15.097030] mv88e6085 d0032004.mdio-mii:01 wan: configuring for phy/ link mode
  637. [ 15.103397] IPv6: ADDRCONF(NETDEV_UP): wan: link is not ready
  638. [ 18.445878] mv88e6085 d0032004.mdio-mii:01 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  639. [ 18.451773] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  640. [ 48.981392] kauditd_printk_skb: 8 callbacks suppressed
  641. [ 48.981400] audit: type=1131 audit(1540472011.855:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  642. [ 49.672152] audit: type=1006 audit(1540472012.545:34): pid=298 uid=0 old-auid=4294967295 auid=0 tty=ttyMV0 old-ses=4294967295 ses=1 res=1
  643. [ 49.738082] audit: type=1130 audit(1540472012.605:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  644. [ 49.799111] audit: type=1006 audit(1540472012.675:36): pid=306 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
  645. [ 50.094567] audit: type=1130 audit(1540472012.965:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  646. [root@alarm ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!