API tools faq
paste
Tanure

DMA SPI Rpi4 BUG

Tanure
Apr 23rd, 2020
301
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.55 KB | None | 0 0
raw download clone embed print report
  1. System Information
  2. ------------------
  3.  
  4. Raspberry Pi 4 Model B Rev 1.2
  5. PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
  6. NAME="Raspbian GNU/Linux"
  7. VERSION_ID="10"
  8. VERSION="10 (buster)"
  9.  
  10. Raspberry Pi reference 2020-02-13
  11. Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 5f884374b6ac6e155330c58caa1fb7249b8badf1, stage2
  12.  
  13. Linux raspberrypi 4.19.113-v7l+ #4 SMP Thu Apr 23 08:31:14 BST 2020 armv7l GNU/Linux
  14. Revision : c03112
  15. Serial : 10000000f09a39db
  16. Model : Raspberry Pi 4 Model B Rev 1.2
  17. Throttled flag : throttled=0x0
  18. Camera : supported=0 detected=0
  19.  
  20. Videocore information
  21. ---------------------
  22.  
  23. Feb 12 2020 12:36:21
  24. Copyright (c) 2012 Broadcom
  25. version c3c8dbdf147686fb0c3f32aece709d0653368810 (clean) (release) (start)
  26.  
  27. alloc failures: 0
  28. compactions: 0
  29. legacy block fails: 0
  30.  
  31. Filesystem information
  32. ----------------------
  33. Filesystem 1K-blocks Used Available Use% Mounted on
  34. /dev/root 14818864 1479132 12705852 11% /
  35. devtmpfs 1866744 0 1866744 0% /dev
  36. tmpfs 1998840 0 1998840 0% /dev/shm
  37. tmpfs 1998840 8572 1990268 1% /run
  38. tmpfs 5120 4 5116 1% /run/lock
  39. tmpfs 1998840 0 1998840 0% /sys/fs/cgroup
  40. /dev/mmcblk0p1 258095 54104 203991 21% /boot
  41. tmpfs 399768 0 399768 0% /run/user/0
  42.  
  43. Filename Type Size Used Priority
  44.  
  45. Package version information
  46. ---------------------------
  47. raspberrypi-ui-mods:
  48. Installed: (none)
  49. raspberrypi-sys-mods:
  50. Installed: 20191105
  51. openbox:
  52. Installed: (none)
  53. lxpanel:
  54. Installed: (none)
  55. pcmanfm:
  56. Installed: (none)
  57. rpd-plym-splash:
  58. Installed: (none)
  59.  
  60. Networking Information
  61. ----------------------
  62.  
  63. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
  64. inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
  65. inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
  66. ether m.m.m.m txqueuelen 1000 (Ethernet)
  67. RX packets 2595 bytes 464000 (453.1 KiB)
  68. RX errors 0 dropped 0 overruns 0 frame 0
  69. TX packets 1246 bytes 223066 (217.8 KiB)
  70. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  71.  
  72. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  73. inet x.x.x.x netmask x.x.x.x
  74. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  75. loop txqueuelen 1000 (Local Loopback)
  76. RX packets 0 bytes 0 (0.0 B)
  77. RX errors 0 dropped 0 overruns 0 frame 0
  78. TX packets 0 bytes 0 (0.0 B)
  79. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  80.  
  81.  
  82. USB Information
  83. ---------------
  84.  
  85. /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
  86. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
  87. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
  88.  
  89. config.txt
  90. ----------
  91.  
  92. arm_freq=1500
  93. audio_pwm_mode=514
  94. config_hdmi_boost=5
  95. core_freq=500
  96. core_freq_min=200
  97. disable_commandline_tags=2
  98. disable_l2cache=1
  99. display_hdmi_rotate=-1
  100. display_lcd_rotate=-1
  101. enable_gic=1
  102. force_eeprom_read=1
  103. force_pwm_open=1
  104. framebuffer_depth=16
  105. framebuffer_ignore_alpha=1
  106. framebuffer_swap=1
  107. gpu_freq=500
  108. gpu_freq_min=250
  109. init_uart_clock=0x2dc6c00
  110. lcd_framerate=60
  111. mask_gpu_interrupt0=1024
  112. mask_gpu_interrupt1=0x10000
  113. max_framebuffers=2
  114. over_voltage_avs=-42500
  115. pause_burst_frames=1
  116. program_serial_random=1
  117. total_mem=4096
  118. hdmi_force_cec_address:0=65535
  119. hdmi_force_cec_address:1=65535
  120. hdmi_pixel_freq_limit:0=0x11e1a300
  121. hdmi_pixel_freq_limit:1=0x11e1a300
  122. device_tree=-
  123. overlay_prefix=overlays/
  124. hdmi_cvt:0=
  125. hdmi_cvt:1=
  126. hdmi_edid_filename:0=
  127. hdmi_edid_filename:1=
  128. hdmi_timings:0=
  129. hdmi_timings:1=
  130.  
  131. cmdline.txt
  132. -----------
  133. coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:71:98:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  134.  
  135. raspi-gpio settings
  136. -------------------
  137.  
  138. BANK0 (GPIO 0 to 27):
  139. GPIO 0: level=1 fsel=0 func=INPUT pull=UP
  140. GPIO 1: level=1 fsel=0 func=INPUT pull=UP
  141. GPIO 2: level=1 fsel=4 alt=0 func=SDA1 pull=UP
  142. GPIO 3: level=1 fsel=4 alt=0 func=SCL1 pull=UP
  143. GPIO 4: level=0 fsel=0 func=INPUT pull=UP
  144. GPIO 5: level=1 fsel=0 func=INPUT pull=UP
  145. GPIO 6: level=1 fsel=0 func=INPUT pull=UP
  146. GPIO 7: level=1 fsel=1 func=OUTPUT pull=UP
  147. GPIO 8: level=1 fsel=1 func=OUTPUT pull=UP
  148. GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO pull=DOWN
  149. GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI pull=DOWN
  150. GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK pull=DOWN
  151. GPIO 12: level=1 fsel=0 func=INPUT pull=NONE
  152. GPIO 13: level=1 fsel=0 func=INPUT pull=DOWN
  153. GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
  154. GPIO 15: level=1 fsel=0 func=INPUT pull=UP
  155. GPIO 16: level=1 fsel=0 func=INPUT pull=NONE
  156. GPIO 17: level=1 fsel=0 func=INPUT pull=UP
  157. GPIO 18: level=0 fsel=4 alt=0 func=PCM_CLK pull=DOWN
  158. GPIO 19: level=0 fsel=4 alt=0 func=PCM_FS pull=DOWN
  159. GPIO 20: level=1 fsel=4 alt=0 func=PCM_DIN pull=DOWN
  160. GPIO 21: level=0 fsel=4 alt=0 func=PCM_DOUT pull=DOWN
  161. GPIO 22: level=1 fsel=0 func=INPUT pull=DOWN
  162. GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
  163. GPIO 24: level=1 fsel=0 func=INPUT pull=DOWN
  164. GPIO 25: level=1 fsel=0 func=INPUT pull=DOWN
  165. GPIO 26: level=1 fsel=1 func=OUTPUT pull=UP
  166. GPIO 27: level=1 fsel=0 func=INPUT pull=NONE
  167. BANK1 (GPIO 28 to 45):
  168. GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
  169. GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
  170. GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
  171. GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
  172. GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
  173. GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
  174. GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE
  175. GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
  176. GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
  177. GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
  178. GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
  179. GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
  180. GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
  181. GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
  182. GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
  183. GPIO 43: level=1 fsel=0 func=INPUT pull=UP
  184. GPIO 44: level=1 fsel=0 func=INPUT pull=UP
  185. GPIO 45: level=1 fsel=0 func=INPUT pull=UP
  186. BANK2 (GPIO 46 to 53):
  187. GPIO 46: level=0 fsel=0 func=INPUT pull=DOWN
  188. GPIO 47: level=0 fsel=0 func=INPUT pull=DOWN
  189. GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
  190. GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
  191. GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
  192. GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
  193. GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
  194. GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN
  195.  
  196. vcdbg log messages
  197. ------------------
  198.  
  199. debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
  200.  
  201. debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
  202.  
  203. debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
  204.  
  205. debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
  206.  
  207. 002959.620: arasan: arasan_emmc_open
  208. 002961.794: arasan: arasan_emmc_set_clock C0: 0x00000000 C1: 0x000e7187 emmc: 250000000 actual: 200000 div: 0x00000271 target: 200000 min: 100000 max: 400000 delay: 10
  209. 003078.564: arasan: arasan_emmc_set_clock C0: 0x00000000 C1: 0x000e7187 emmc: 250000000 actual: 200000 div: 0x00000271 target: 200000 min: 100000 max: 400000 delay: 10
  210. 003085.720: arasan: arasan_emmc_set_clock C0: 0x00000f00 C1: 0x000ec2c7 emmc: 250000000 actual: 129937 div: 0x000003c2 target: 130000 min: 100000 max: 400000 delay: 15
  211. 003129.181: arasan: arasan_emmc_set_clock C0: 0x00000f06 C1: 0x000e0307 emmc: 250000000 actual: 41666666 div: 0x00000003 target: 40000000 min: 0 max: 40000000 delay: 1
  212. 003404.615: brfs: File read: /mfs/sd/config.txt
  213. 003413.282: brfs: File read: 1991 bytes
  214. 003442.946: brfs: File read: /mfs/sd/config.txt
  215. 003891.603: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
  216. 003894.095: *** Restart logging
  217. 003894.136: brfs: File read: 1991 bytes
  218. 003899.526: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  219. 003902.926: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  220. 003902.961: HDMI0: hdmi_pixel_encoding: 300000000
  221.  
  222. 003902.975: HDMI1: hdmi_pixel_encoding: 300000000
  223.  
  224. 003922.111: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
  225. 003922.153: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0x9f83
  226. 004279.946: brfs: File read: 40835 bytes
  227. 004282.233: brfs: File read: /mfs/sd/config.txt
  228. 004282.775: dterror: not a valid FDT - err -9
  229. 004282.782: Failed to load HAT overlay
  230. 004282.822: brfs: File read: 1991 bytes
  231. 004296.772: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo
  232. 004372.135: Loaded overlay 'vc4-fkms-v3d'
  233. 004506.971: brfs: File read: 1255 bytes
  234. 005681.624: brfs: File read: 5977 bytes
  235. 005683.057: brfs: File read: /mfs/sd/cmdline.txt
  236. 005683.114: Read command line from file 'cmdline.txt':
  237. 005683.145: 'console=serial0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait'
  238. 007376.288: brfs: File read: 121 bytes
  239. 007855.716: brfs: File read: /mfs/sd/kernel7l.img
  240. 007855.752: Loading 'kernel7l.img' to 0x8000 size 0x5bc608
  241. 007855.798: Device tree loaded to 0x2eff4d00 (size 0xb21b)
  242. 007860.233: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
  243. 010052.870: vchiq_core: vchiq_init_state: slot_zero = 0xded80000, is_master = 1
  244. 012682.858: brfs: File read: 6014472 bytes
  245.  
  246. dmesg log
  247. ---------
  248.  
  249. [ 0.000000] Booting Linux on physical CPU 0x0
  250. [ 0.000000] Linux version 4.19.113-v7l+ (tanureal@archtower) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12)) #4 SMP Thu Apr 23 08:31:14 BST 2020
  251. [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  252. [ 0.000000] CPU: div instructions available: patching division code
  253. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  254. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
  255. [ 0.000000] Memory policy: Data cache writealloc
  256. [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
  257. [ 0.000000] On node 0 totalpages: 1012736
  258. [ 0.000000] DMA zone: 1728 pages used for memmap
  259. [ 0.000000] DMA zone: 0 pages reserved
  260. [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
  261. [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63
  262. [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e0 with crng_init=0
  263. [ 0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536
  264. [ 0.000000] pcpu-alloc: s36748 r8192 d20596 u65536 alloc=16*4096
  265. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  266. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008
  267. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  268. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  269. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  270. [ 0.000000] Memory: 3733492K/4050944K available (10240K kernel code, 705K rwdata, 2572K rodata, 2048K init, 861K bss, 55308K reserved, 262144K cma-reserved, 3264512K highmem)
  271. [ 0.000000] Virtual kernel memory layout:
  272. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  273. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  274. vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  275. lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  276. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  277. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  278. .text : 0x(ptrval) - 0x(ptrval) (12256 kB)
  279. .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
  280. .data : 0x(ptrval) - 0x(ptrval) ( 706 kB)
  281. .bss : 0x(ptrval) - 0x(ptrval) ( 862 kB)
  282. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  283. [ 0.000000] ftrace: allocating 29968 entries in 88 pages
  284. [ 0.000000] rcu: Hierarchical RCU implementation.
  285. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  286. [ 0.000000] GIC: Using split EOI/Deactivate mode
  287. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  288. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  289. [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  290. [ 0.000020] Switching to timer-based delay loop, resolution 18ns
  291. [ 0.000253] Console: colour dummy device 80x30
  292. [ 0.000696] console [tty1] enabled
  293. [ 0.000746] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
  294. [ 0.000783] pid_max: default: 32768 minimum: 301
  295. [ 0.001057] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  296. [ 0.001090] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  297. [ 0.001861] CPU: Testing write buffer coherency: ok
  298. [ 0.002287] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  299. [ 0.002943] Setting up static identity map for 0x200000 - 0x20003c
  300. [ 0.003116] rcu: Hierarchical SRCU implementation.
  301. [ 0.003993] smp: Bringing up secondary CPUs ...
  302. [ 0.004879] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  303. [ 0.005869] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  304. [ 0.006817] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  305. [ 0.006938] smp: Brought up 1 node, 4 CPUs
  306. [ 0.007006] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  307. [ 0.007029] CPU: All CPU(s) started in HYP mode.
  308. [ 0.007049] CPU: Virtualization extensions available.
  309. [ 0.007840] devtmpfs: initialized
  310. [ 0.019247] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  311. [ 0.019474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  312. [ 0.019516] futex hash table entries: 1024 (order: 4, 65536 bytes)
  313. [ 0.026363] pinctrl core: initialized pinctrl subsystem
  314. [ 0.027264] NET: Registered protocol family 16
  315. [ 0.030229] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  316. [ 0.031663] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  317. [ 0.031694] hw-breakpoint: maximum watchpoint size is 8 bytes.
  318. [ 0.031904] Serial: AMBA PL011 UART driver
  319. [ 0.035404] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  320. [ 0.050007] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-12 12:36, variant start
  321. [ 0.060021] raspberrypi-firmware soc:firmware: Firmware hash is c3c8dbdf147686fb0c3f32aece709d0653368810
  322. [ 0.101996] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  323. [ 0.102257] bcm2835-dma fe007000.dma: Initialized 6 DMA channels
  324. [ 0.102645] bcm2835-dma fe007000.dma: Load BCM2835 DMA engine driver
  325. [ 0.103639] bcm2835-dma fe007b00.dma: Initialized 2 DMA channels
  326. [ 0.103793] bcm2835-dma fe007b00.dma: Load BCM2835 DMA engine driver
  327. [ 0.106095] vgaarb: loaded
  328. [ 0.106471] SCSI subsystem initialized
  329. [ 0.106676] usbcore: registered new interface driver usbfs
  330. [ 0.106742] usbcore: registered new interface driver hub
  331. [ 0.106866] usbcore: registered new device driver usb
  332. [ 0.107129] Advanced Linux Sound Architecture Driver Initialized.
  333. [ 0.108135] clocksource: Switched to clocksource arch_sys_counter
  334. [ 0.191856] VFS: Disk quotas dquot_6.6.0
  335. [ 0.191964] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  336. [ 0.192128] FS-Cache: Loaded
  337. [ 0.192315] CacheFiles: Loaded
  338. [ 0.192871] simple-framebuffer: probe of 0.framebuffer failed with error -12
  339. [ 0.202046] NET: Registered protocol family 2
  340. [ 0.202794] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  341. [ 0.202839] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  342. [ 0.202911] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  343. [ 0.202988] TCP: Hash tables configured (established 8192 bind 8192)
  344. [ 0.203129] UDP hash table entries: 512 (order: 2, 16384 bytes)
  345. [ 0.203173] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  346. [ 0.203390] NET: Registered protocol family 1
  347. [ 0.203928] RPC: Registered named UNIX socket transport module.
  348. [ 0.203954] RPC: Registered udp transport module.
  349. [ 0.203975] RPC: Registered tcp transport module.
  350. [ 0.203996] RPC: Registered tcp NFSv4.1 backchannel transport module.
  351. [ 0.204024] PCI: CLS 0 bytes, default 64
  352. [ 0.205876] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  353. [ 0.208091] Initialise system trusted keyrings
  354. [ 0.208328] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  355. [ 0.217455] FS-Cache: Netfs 'nfs' registered for caching
  356. [ 0.217957] NFS: Registering the id_resolver key type
  357. [ 0.217995] Key type id_resolver registered
  358. [ 0.218016] Key type id_legacy registered
  359. [ 0.218046] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  360. [ 0.222611] Key type asymmetric registered
  361. [ 0.222639] Asymmetric key parser 'x509' registered
  362. [ 0.222759] bounce: pool size: 64 pages
  363. [ 0.222820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  364. [ 0.223002] io scheduler noop registered
  365. [ 0.223026] io scheduler deadline registered (default)
  366. [ 0.223206] io scheduler cfq registered
  367. [ 0.223229] io scheduler mq-deadline registered (default)
  368. [ 0.223252] io scheduler kyber registered
  369. [ 0.253997] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
  370. [ 0.254044] brcm-pcie fd500000.pcie: could not get clock
  371. [ 0.254115] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  372. [ 0.254166] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
  373. [ 0.308174] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
  374. [ 0.308467] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  375. [ 0.308497] pci_bus 0000:00: root bus resource [bus 00-01]
  376. [ 0.308526] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  377. [ 0.308589] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  378. [ 0.308727] pci 0000:00:00.0: PME# supported from D0 D3hot
  379. [ 0.311707] PCI: bus0: Fast back to back transfers disabled
  380. [ 0.311738] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  381. [ 0.311974] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  382. [ 0.312098] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  383. [ 0.312414] pci 0000:01:00.0: PME# supported from D0 D3cold
  384. [ 0.315385] PCI: bus1: Fast back to back transfers disabled
  385. [ 0.315415] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
  386. [ 0.315461] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  387. [ 0.315494] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  388. [ 0.315582] pci 0000:00:00.0: PCI bridge to [bus 01]
  389. [ 0.315610] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  390. [ 0.315832] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  391. [ 0.316019] pcieport 0000:00:00.0: Signaling PME with IRQ 55
  392. [ 0.316195] pcieport 0000:00:00.0: AER enabled with IRQ 55
  393. [ 0.316377] pci 0000:01:00.0: enabling device (0140 -> 0142)
  394. [ 0.320619] iproc-rng200 fe104000.rng: hwrng registered
  395. [ 0.320860] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  396. [ 0.321404] vc-sm: Videocore shared memory driver
  397. [ 0.321825] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  398. [ 0.331776] brd: module loaded
  399. [ 0.341346] loop: module loaded
  400. [ 0.342122] Loading iSCSI transport class v2.0-870.
  401. [ 0.343832] libphy: Fixed MDIO Bus: probed
  402. [ 0.344279] bcmgenet fd580000.genet: failed to get enet clock
  403. [ 0.344309] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
  404. [ 0.344339] bcmgenet fd580000.genet: failed to get enet-wol clock
  405. [ 0.344367] bcmgenet fd580000.genet: failed to get enet-eee clock
  406. [ 0.344403] bcmgenet: Skipping UMAC reset
  407. [ 0.344649] unimac-mdio unimac-mdio.-19: DMA mask not set
  408. [ 0.358170] libphy: bcmgenet MII bus: probed
  409. [ 0.398675] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
  410. [ 0.399584] usbcore: registered new interface driver r8152
  411. [ 0.399667] usbcore: registered new interface driver lan78xx
  412. [ 0.399733] usbcore: registered new interface driver smsc95xx
  413. [ 0.400043] xhci_hcd 0000:01:00.0: xHCI Host Controller
  414. [ 0.400092] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  415. [ 0.402318] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
  416. [ 0.402657] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 56
  417. [ 0.403519] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  418. [ 0.403552] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  419. [ 0.403581] usb usb1: Product: xHCI Host Controller
  420. [ 0.403604] usb usb1: Manufacturer: Linux 4.19.113-v7l+ xhci-hcd
  421. [ 0.403628] usb usb1: SerialNumber: 0000:01:00.0
  422. [ 0.404148] hub 1-0:1.0: USB hub found
  423. [ 0.404241] hub 1-0:1.0: 1 port detected
  424. [ 0.404721] xhci_hcd 0000:01:00.0: xHCI Host Controller
  425. [ 0.404756] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  426. [ 0.404794] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  427. [ 0.405214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  428. [ 0.405246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  429. [ 0.405274] usb usb2: Product: xHCI Host Controller
  430. [ 0.405297] usb usb2: Manufacturer: Linux 4.19.113-v7l+ xhci-hcd
  431. [ 0.405321] usb usb2: SerialNumber: 0000:01:00.0
  432. [ 0.405822] hub 2-0:1.0: USB hub found
  433. [ 0.405892] hub 2-0:1.0: 4 ports detected
  434. [ 0.407140] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  435. [ 0.407355] dwc_otg: FIQ enabled
  436. [ 0.407364] dwc_otg: NAK holdoff enabled
  437. [ 0.407373] dwc_otg: FIQ split-transaction FSM enabled
  438. [ 0.407385] Module dwc_common_port init
  439. [ 0.407605] usbcore: registered new interface driver uas
  440. [ 0.407711] usbcore: registered new interface driver usb-storage
  441. [ 0.407897] mousedev: PS/2 mouse device common for all mice
  442. [ 0.409171] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  443. [ 0.410830] sdhci: Secure Digital Host Controller Interface driver
  444. [ 0.410855] sdhci: Copyright(c) Pierre Ossman
  445. [ 0.411217] bcm2835-dma fe007000.dma: Allocating DMA channel 2
  446. [ 0.411296] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  447. [ 0.411348] bcm2835-dma fe007000.dma: Freeing DMA channel 2
  448. [ 0.411751] sdhci-pltfm: SDHCI platform and OF driver helper
  449. [ 0.414796] ledtrig-cpu: registered to indicate activity on CPUs
  450. [ 0.414955] hidraw: raw HID events driver (C) Jiri Kosina
  451. [ 0.415088] usbcore: registered new interface driver usbhid
  452. [ 0.415110] usbhid: USB HID core driver
  453. [ 0.415930] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  454. [ 0.417673] [vc_sm_connected_init]: start
  455. [ 0.426579] [vc_sm_connected_init]: end - returning 0
  456. [ 0.428423] Initializing XFRM netlink socket
  457. [ 0.428467] NET: Registered protocol family 17
  458. [ 0.428563] Key type dns_resolver registered
  459. [ 0.428879] Registering SWP/SWPB emulation handler
  460. [ 0.429468] registered taskstats version 1
  461. [ 0.429498] Loading compiled-in X.509 certificates
  462. [ 0.436527] uart-pl011 fe201000.serial: cts_event_workaround enabled
  463. [ 0.436606] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
  464. [ 0.441703] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  465. [ 0.442239] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
  466. [ 0.442727] bcm2835-dma fe007000.dma: Allocating DMA channel 2
  467. [ 0.442897] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  468. [ 0.442924] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  469. [ 0.468723] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.6
  470. [ 0.468823] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.7
  471. [ 0.487041] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  472. [ 0.488657] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  473. [ 0.490267] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  474. [ 0.493137] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  475. [ 0.494741] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  476. [ 0.500852] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  477. [ 0.503367] of_cfs_init
  478. [ 0.503472] of_cfs_init: OK
  479. [ 0.503774] ALSA device list:
  480. [ 0.503794] No soundcards found.
  481. [ 0.504088] Waiting for root device PARTUUID=738a4d67-02...
  482. [ 0.550140] random: fast init done
  483. [ 0.564820] mmc1: new high speed SDIO card at address 0001
  484. [ 0.604072] mmc0: new ultra high speed DDR50 SDHC card at address 0001
  485. [ 0.605214] mmcblk0: mmc0:0001 FB4HT 29.8 GiB
  486. [ 0.606325] mmcblk0: p1 p2
  487. [ 0.626006] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  488. [ 0.626076] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  489. [ 0.630879] devtmpfs: mounted
  490. [ 0.638866] Freeing unused kernel memory: 2048K
  491. [ 0.658421] Run /sbin/init as init process
  492. [ 0.768188] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  493. [ 0.950828] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  494. [ 0.950867] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  495. [ 0.950895] usb 1-1: Product: USB2.0 Hub
  496. [ 0.952880] hub 1-1:1.0: USB hub found
  497. [ 0.953213] hub 1-1:1.0: 4 ports detected
  498. [ 1.062154] systemd[1]: System time before build time, advancing clock.
  499. [ 1.153447] NET: Registered protocol family 10
  500. [ 1.154685] Segment Routing with IPv6
  501. [ 1.189766] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  502. [ 1.190481] systemd[1]: Detected architecture arm.
  503. [ 1.199917] systemd[1]: Set hostname to <raspberrypi>.
  504. [ 1.763818] random: systemd: uninitialized urandom read (16 bytes read)
  505. [ 1.771687] random: systemd: uninitialized urandom read (16 bytes read)
  506. [ 1.777005] systemd[1]: Created slice system-getty.slice.
  507. [ 1.777605] random: systemd: uninitialized urandom read (16 bytes read)
  508. [ 1.778934] systemd[1]: Created slice User and Session Slice.
  509. [ 1.779654] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  510. [ 1.780552] systemd[1]: Listening on udev Kernel Socket.
  511. [ 1.800700] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  512. [ 1.801445] systemd[1]: Listening on udev Control Socket.
  513. [ 1.806904] systemd[1]: Listening on Syslog Socket.
  514. [ 2.342476] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  515. [ 2.456256] systemd-journald[113]: Received request to flush runtime journal from PID 1
  516. [ 2.910004] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
  517. [ 2.910868] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
  518. [ 2.914363] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
  519. [ 2.919397] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  520. [ 2.938952] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  521. [ 2.938968] [vc_sm_connected_init]: start
  522. [ 2.938981] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
  523. [ 2.945917] [vc_sm_connected_init]: installed successfully
  524. [ 2.948063] media: Linux media interface: v0.10
  525. [ 2.952084] bcm2835-dma fe007000.dma: Allocating DMA channel 4
  526. [ 2.952188] bcm2835-dma fe007000.dma: Allocating DMA channel 5
  527. [ 2.956029] bcm2835-dma fe007000.dma: Allocating DMA channel 6
  528. [ 2.956122] bcm2835-dma fe007000.dma: Allocating DMA channel 7
  529. [ 2.983180] videodev: Linux video capture interface: v2.00
  530. [ 3.021757] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  531. [ 3.026015] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  532. [ 3.038952] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  533. [ 3.044294] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  534. [ 3.056476] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  535. [ 3.056526] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  536. [ 3.070320] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  537. [ 3.070352] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  538. [ 3.078862] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  539. [ 3.078925] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  540. [ 3.126596] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  541. [ 3.186135] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  542. [ 3.257846] brcmfmac: F1 signature read @0x18000000=0x15264345
  543. [ 3.277486] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  544. [ 3.277888] usbcore: registered new interface driver brcmfmac
  545. [ 3.331145] [drm] No displays found. Consider forcing hotplug if HDMI is attached
  546. [ 3.331238] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  547. [ 3.331743] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
  548. [ 3.331755] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  549. [ 3.331765] [drm] No driver support for vblank timestamp query.
  550. [ 3.331774] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  551. [ 3.393231] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  552. [ 3.521002] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  553. [ 3.534503] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
  554. [ 4.470758] random: crng init done
  555. [ 4.470770] random: 7 urandom warning(s) missed due to ratelimiting
  556. [ 5.565485] 8021q: 802.1Q VLAN Support v1.8
  557. [ 5.584861] uart-pl011 fe201000.serial: no DMA platform data
  558. [ 5.968968] bcmgenet: Skipping UMAC reset
  559. [ 6.078605] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
  560. [ 6.078872] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  561. [ 7.128267] bcmgenet fd580000.genet eth0: Link is Down
  562. [ 11.288520] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  563. [ 11.288561] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  564. [ 12.177747] Bluetooth: Core ver 2.22
  565. [ 12.177821] NET: Registered protocol family 31
  566. [ 12.177831] Bluetooth: HCI device and connection manager initialized
  567. [ 12.177853] Bluetooth: HCI socket layer initialized
  568. [ 12.177868] Bluetooth: L2CAP socket layer initialized
  569. [ 12.177913] Bluetooth: SCO socket layer initialized
  570. [ 12.187502] Bluetooth: HCI UART driver ver 2.3
  571. [ 12.187512] Bluetooth: HCI UART protocol H4 registered
  572. [ 12.187564] Bluetooth: HCI UART protocol Three-wire (H5) registered
  573. [ 12.187725] Bluetooth: HCI UART protocol Broadcom registered
  574. [ 12.356987] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  575. [ 12.356994] Bluetooth: BNEP filters: protocol multicast
  576. [ 12.357003] Bluetooth: BNEP socket layer initialized
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!