Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@home-pve:~# smartctl -a /dev/sda
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.102-1-pve] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba HK4R Series SSD
- Device Model: TOSHIBA THNSN81Q92CSE
- Serial Number: xxxxxxxx
- LU WWN Device Id: 5 00080d 9107b02e0
- Firmware Version: 8EET6101
- User Capacity: 1,920,383,410,176 bytes [1.92 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- TRIM Command: Available, deterministic, zeroed
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 (minor revision not indicated)
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Apr 27 14:36:45 2023 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 67) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
- 7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0
- 8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 48344
- 10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 31
- 167 SSD_Protect_Mode 0x0022 100 100 000 Old_age Always - 0
- 168 SATA_PHY_Error_Count 0x0012 100 100 000 Old_age Always - 0
- 169 Bad_Block_Count 0x0013 100 100 010 Pre-fail Always - 100
- 170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 0
- 173 Erase_Count 0x0012 199 199 000 Old_age Always - 4297605213
- 174 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 908550
- 175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 20
- 194 Temperature_Celsius 0x0022 073 059 000 Old_age Always - 27 (Min/Max 20/41)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 232 Available_Reservd_Space 0x0022 100 100 000 Old_age Always - 0
- 240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
- 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 6969418
- 242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 2471700
- 243 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 679
- 249 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 255150
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 48362 -
- # 2 Short offline Completed without error 00% 48362 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- root@home-pve:~# smartctl -a /dev/sdb
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.102-1-pve] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba HK4R Series SSD
- Device Model: TOSHIBA THNSN81Q92CSE
- Serial Number: xxxxxxxxxxxx
- LU WWN Device Id: 5 00080d 9107b1f88
- Firmware Version: 8EET6101
- User Capacity: 1,920,383,410,176 bytes [1.92 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- TRIM Command: Available, deterministic, zeroed
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 (minor revision not indicated)
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Apr 27 14:45:24 2023 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 67) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
- 7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0
- 8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 48510
- 10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 27
- 167 SSD_Protect_Mode 0x0022 100 100 000 Old_age Always - 0
- 168 SATA_PHY_Error_Count 0x0012 100 100 000 Old_age Always - 0
- 169 Bad_Block_Count 0x0013 100 100 010 Pre-fail Always - 100
- 170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 0
- 173 Erase_Count 0x0012 199 199 000 Old_age Always - 4297519306
- 174 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 887901
- 175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 17
- 194 Temperature_Celsius 0x0022 071 060 000 Old_age Always - 29 (Min/Max 19/40)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 232 Available_Reservd_Space 0x0022 100 100 000 Old_age Always - 0
- 240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
- 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 6617773
- 242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 2390652
- 243 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 685
- 249 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 246177
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 48528 -
- # 2 Short offline Completed without error 00% 48528 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
