API tools faq
paste
Guest User

smartctl disk

a guest
Apr 5th, 2018
105
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.84 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-21-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Momentus 5400.6
  6. Device Model: ST9320325AS
  7. Serial Number: 6VD3GGBR
  8. LU WWN Device Id: 5 000c50 0282b12c8
  9. Firmware Version: D005DEM1
  10. User Capacity: 320,072,933,376 bytes [320 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 5400 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 2.6, 3.0 Gb/s
  16. Local Time is: Thu Apr 5 19:30:15 2018 UTC
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 0) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 99) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 3) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 108 074 006 Pre-fail Always - 154239357
  61. 3 Spin_Up_Time 0x0003 098 098 085 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 8046
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 330910491
  65. 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7324
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 093 093 020 Old_age Always - 7744
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 27511
  70. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032879
  71. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  72. 190 Airflow_Temperature_Cel 0x0022 062 048 045 Old_age Always - 38 (Min/Max 32/38)
  73. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 305
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 248
  75. 193 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 30509
  76. 194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 15 0 0 0)
  77. 195 Hardware_ECC_Recovered 0x001a 061 048 000 Old_age Always - 154239357
  78. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 7
  79. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 7
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7214 (119 165 0)
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 608467307
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 251341597
  84. 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
  85.  
  86. SMART Error Log Version: 1
  87. ATA Error Count: 27508 (device log contains only the most recent five errors)
  88. CR = Command Register [HEX]
  89. FR = Features Register [HEX]
  90. SC = Sector Count Register [HEX]
  91. SN = Sector Number Register [HEX]
  92. CL = Cylinder Low Register [HEX]
  93. CH = Cylinder High Register [HEX]
  94. DH = Device/Head Register [HEX]
  95. DC = Device Command Register [HEX]
  96. ER = Error register [HEX]
  97. ST = Status register [HEX]
  98. Powered_Up_Time is measured from power on, and printed as
  99. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  100. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  101.  
  102. Error 27508 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  103. When the command that caused the error occurred, the device was active or idle.
  104.  
  105. After command completion occurred, registers were:
  106. ER ST SC SN CL CH DH
  107. -- -- -- -- -- -- --
  108. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  109.  
  110. Commands leading to the command that caused the error were:
  111. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  112. -- -- -- -- -- -- -- -- ---------------- --------------------
  113. 60 00 08 a8 a5 15 41 00 00:19:40.646 READ FPDMA QUEUED
  114. ef 02 00 00 00 00 00 00 00:19:40.641 SET FEATURES [Enable write cache]
  115. 00 00 00 00 00 00 00 ff 00:19:40.529 NOP [Abort queued commands]
  116. 60 00 08 a8 a5 15 41 00 00:19:38.170 READ FPDMA QUEUED
  117. ef 02 00 00 00 00 00 00 00:19:38.170 SET FEATURES [Enable write cache]
  118.  
  119. Error 27507 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  120. When the command that caused the error occurred, the device was active or idle.
  121.  
  122. After command completion occurred, registers were:
  123. ER ST SC SN CL CH DH
  124. -- -- -- -- -- -- --
  125. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  126.  
  127. Commands leading to the command that caused the error were:
  128. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  129. -- -- -- -- -- -- -- -- ---------------- --------------------
  130. 60 00 08 a8 a5 15 41 00 00:19:38.170 READ FPDMA QUEUED
  131. ef 02 00 00 00 00 00 00 00:19:38.170 SET FEATURES [Enable write cache]
  132. 00 00 00 00 00 00 00 ff 00:19:38.074 NOP [Abort queued commands]
  133. 60 00 08 a8 a5 15 41 00 00:19:35.715 READ FPDMA QUEUED
  134. ef 02 00 00 00 00 00 00 00:19:35.711 SET FEATURES [Enable write cache]
  135.  
  136. Error 27506 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  137. When the command that caused the error occurred, the device was active or idle.
  138.  
  139. After command completion occurred, registers were:
  140. ER ST SC SN CL CH DH
  141. -- -- -- -- -- -- --
  142. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  143.  
  144. Commands leading to the command that caused the error were:
  145. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  146. -- -- -- -- -- -- -- -- ---------------- --------------------
  147. 60 00 08 a8 a5 15 41 00 00:19:35.715 READ FPDMA QUEUED
  148. ef 02 00 00 00 00 00 00 00:19:35.711 SET FEATURES [Enable write cache]
  149. 00 00 00 00 00 00 00 ff 00:19:35.599 NOP [Abort queued commands]
  150. 60 00 08 a8 a5 15 41 00 00:19:33.239 READ FPDMA QUEUED
  151. ef 02 00 00 00 00 00 00 00:19:33.239 SET FEATURES [Enable write cache]
  152.  
  153. Error 27505 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  154. When the command that caused the error occurred, the device was active or idle.
  155.  
  156. After command completion occurred, registers were:
  157. ER ST SC SN CL CH DH
  158. -- -- -- -- -- -- --
  159. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  160.  
  161. Commands leading to the command that caused the error were:
  162. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  163. -- -- -- -- -- -- -- -- ---------------- --------------------
  164. 60 00 08 a8 a5 15 41 00 00:19:33.239 READ FPDMA QUEUED
  165. ef 02 00 00 00 00 00 00 00:19:33.239 SET FEATURES [Enable write cache]
  166. 00 00 00 00 00 00 00 ff 00:19:33.144 NOP [Abort queued commands]
  167. 60 00 08 a8 a5 15 41 00 00:19:30.785 READ FPDMA QUEUED
  168. ef 02 00 00 00 00 00 00 00:19:30.781 SET FEATURES [Enable write cache]
  169.  
  170. Error 27504 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  171. When the command that caused the error occurred, the device was active or idle.
  172.  
  173. After command completion occurred, registers were:
  174. ER ST SC SN CL CH DH
  175. -- -- -- -- -- -- --
  176. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  177.  
  178. Commands leading to the command that caused the error were:
  179. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  180. -- -- -- -- -- -- -- -- ---------------- --------------------
  181. 60 00 08 a8 a5 15 41 00 00:19:30.785 READ FPDMA QUEUED
  182. ef 02 00 00 00 00 00 00 00:19:30.781 SET FEATURES [Enable write cache]
  183. 00 00 00 00 00 00 00 ff 00:19:30.668 NOP [Abort queued commands]
  184. 60 00 08 a8 a5 15 41 00 00:19:28.308 READ FPDMA QUEUED
  185. ef 02 00 00 00 00 00 00 00:19:28.308 SET FEATURES [Enable write cache]
  186.  
  187. SMART Self-test log structure revision number 1
  188. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  189. # 1 Short offline Completed without error 00% 4182 -
  190. # 2 Short offline Completed without error 00% 2 -
  191. # 3 Short offline Completed without error 00% 0 -
  192. # 4 Short offline Completed without error 00% 0 -
  193.  
  194. SMART Selective self-test log data structure revision number 1
  195. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  196. 1 0 0 Not_testing
  197. 2 0 0 Not_testing
  198. 3 0 0 Not_testing
  199. 4 0 0 Not_testing
  200. 5 0 0 Not_testing
  201. Selective self-test flags (0x0):
  202. After scanning selected spans, do NOT read-scan remainder of disk.
  203. If Selective self-test is pending on power-up, resume after 0 minute delay.
  204.  
  205. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-21-generic] (local build)
  206. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  207.  
  208. === START OF INFORMATION SECTION ===
  209. Model Family: Seagate Momentus 5400.6
  210. Device Model: ST9320325AS
  211. Serial Number: 6VD3GGBR
  212. LU WWN Device Id: 5 000c50 0282b12c8
  213. Firmware Version: D005DEM1
  214. User Capacity: 320,072,933,376 bytes [320 GB]
  215. Sector Size: 512 bytes logical/physical
  216. Rotation Rate: 5400 rpm
  217. Device is: In smartctl database [for details use: -P show]
  218. ATA Version is: ATA8-ACS T13/1699-D revision 4
  219. SATA Version is: SATA 2.6, 3.0 Gb/s
  220. Local Time is: Thu Apr 5 19:30:19 2018 UTC
  221. SMART support is: Available - device has SMART capability.
  222. SMART support is: Enabled
  223.  
  224. === START OF READ SMART DATA SECTION ===
  225. SMART overall-health self-assessment test result: PASSED
  226.  
  227. General SMART Values:
  228. Offline data collection status: (0x82) Offline data collection activity
  229. was completed without error.
  230. Auto Offline Data Collection: Enabled.
  231. Self-test execution status: ( 0) The previous self-test routine completed
  232. without error or no self-test has ever
  233. been run.
  234. Total time to complete Offline
  235. data collection: ( 0) seconds.
  236. Offline data collection
  237. capabilities: (0x7b) SMART execute Offline immediate.
  238. Auto Offline data collection on/off support.
  239. Suspend Offline collection upon new
  240. command.
  241. Offline surface scan supported.
  242. Self-test supported.
  243. Conveyance Self-test supported.
  244. Selective Self-test supported.
  245. SMART capabilities: (0x0003) Saves SMART data before entering
  246. power-saving mode.
  247. Supports SMART auto save timer.
  248. Error logging capability: (0x01) Error logging supported.
  249. General Purpose Logging supported.
  250. Short self-test routine
  251. recommended polling time: ( 2) minutes.
  252. Extended self-test routine
  253. recommended polling time: ( 99) minutes.
  254. Conveyance self-test routine
  255. recommended polling time: ( 3) minutes.
  256. SCT capabilities: (0x103f) SCT Status supported.
  257. SCT Error Recovery Control supported.
  258. SCT Feature Control supported.
  259. SCT Data Table supported.
  260.  
  261. SMART Attributes Data Structure revision number: 10
  262. Vendor Specific SMART Attributes with Thresholds:
  263. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  264. 1 Raw_Read_Error_Rate 0x000f 108 074 006 Pre-fail Always - 154239357
  265. 3 Spin_Up_Time 0x0003 098 098 085 Pre-fail Always - 0
  266. 4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 8046
  267. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  268. 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 330910491
  269. 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7324
  270. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  271. 12 Power_Cycle_Count 0x0032 093 093 020 Old_age Always - 7744
  272. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  273. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 27511
  274. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032879
  275. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  276. 190 Airflow_Temperature_Cel 0x0022 062 048 045 Old_age Always - 38 (Min/Max 32/38)
  277. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 305
  278. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 248
  279. 193 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 30509
  280. 194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 15 0 0 0)
  281. 195 Hardware_ECC_Recovered 0x001a 061 048 000 Old_age Always - 154239357
  282. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 7
  283. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 7
  284. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  285. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7214 (135 251 0)
  286. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 608467307
  287. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 251341597
  288. 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
  289.  
  290. SMART Error Log Version: 1
  291. ATA Error Count: 27508 (device log contains only the most recent five errors)
  292. CR = Command Register [HEX]
  293. FR = Features Register [HEX]
  294. SC = Sector Count Register [HEX]
  295. SN = Sector Number Register [HEX]
  296. CL = Cylinder Low Register [HEX]
  297. CH = Cylinder High Register [HEX]
  298. DH = Device/Head Register [HEX]
  299. DC = Device Command Register [HEX]
  300. ER = Error register [HEX]
  301. ST = Status register [HEX]
  302. Powered_Up_Time is measured from power on, and printed as
  303. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  304. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  305.  
  306. Error 27508 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  307. When the command that caused the error occurred, the device was active or idle.
  308.  
  309. After command completion occurred, registers were:
  310. ER ST SC SN CL CH DH
  311. -- -- -- -- -- -- --
  312. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  313.  
  314. Commands leading to the command that caused the error were:
  315. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  316. -- -- -- -- -- -- -- -- ---------------- --------------------
  317. 60 00 08 a8 a5 15 41 00 00:19:40.646 READ FPDMA QUEUED
  318. ef 02 00 00 00 00 00 00 00:19:40.641 SET FEATURES [Enable write cache]
  319. 00 00 00 00 00 00 00 ff 00:19:40.529 NOP [Abort queued commands]
  320. 60 00 08 a8 a5 15 41 00 00:19:38.170 READ FPDMA QUEUED
  321. ef 02 00 00 00 00 00 00 00:19:38.170 SET FEATURES [Enable write cache]
  322.  
  323. Error 27507 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  324. When the command that caused the error occurred, the device was active or idle.
  325.  
  326. After command completion occurred, registers were:
  327. ER ST SC SN CL CH DH
  328. -- -- -- -- -- -- --
  329. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  330.  
  331. Commands leading to the command that caused the error were:
  332. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  333. -- -- -- -- -- -- -- -- ---------------- --------------------
  334. 60 00 08 a8 a5 15 41 00 00:19:38.170 READ FPDMA QUEUED
  335. ef 02 00 00 00 00 00 00 00:19:38.170 SET FEATURES [Enable write cache]
  336. 00 00 00 00 00 00 00 ff 00:19:38.074 NOP [Abort queued commands]
  337. 60 00 08 a8 a5 15 41 00 00:19:35.715 READ FPDMA QUEUED
  338. ef 02 00 00 00 00 00 00 00:19:35.711 SET FEATURES [Enable write cache]
  339.  
  340. Error 27506 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  341. When the command that caused the error occurred, the device was active or idle.
  342.  
  343. After command completion occurred, registers were:
  344. ER ST SC SN CL CH DH
  345. -- -- -- -- -- -- --
  346. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  347.  
  348. Commands leading to the command that caused the error were:
  349. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  350. -- -- -- -- -- -- -- -- ---------------- --------------------
  351. 60 00 08 a8 a5 15 41 00 00:19:35.715 READ FPDMA QUEUED
  352. ef 02 00 00 00 00 00 00 00:19:35.711 SET FEATURES [Enable write cache]
  353. 00 00 00 00 00 00 00 ff 00:19:35.599 NOP [Abort queued commands]
  354. 60 00 08 a8 a5 15 41 00 00:19:33.239 READ FPDMA QUEUED
  355. ef 02 00 00 00 00 00 00 00:19:33.239 SET FEATURES [Enable write cache]
  356.  
  357. Error 27505 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  358. When the command that caused the error occurred, the device was active or idle.
  359.  
  360. After command completion occurred, registers were:
  361. ER ST SC SN CL CH DH
  362. -- -- -- -- -- -- --
  363. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  364.  
  365. Commands leading to the command that caused the error were:
  366. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  367. -- -- -- -- -- -- -- -- ---------------- --------------------
  368. 60 00 08 a8 a5 15 41 00 00:19:33.239 READ FPDMA QUEUED
  369. ef 02 00 00 00 00 00 00 00:19:33.239 SET FEATURES [Enable write cache]
  370. 00 00 00 00 00 00 00 ff 00:19:33.144 NOP [Abort queued commands]
  371. 60 00 08 a8 a5 15 41 00 00:19:30.785 READ FPDMA QUEUED
  372. ef 02 00 00 00 00 00 00 00:19:30.781 SET FEATURES [Enable write cache]
  373.  
  374. Error 27504 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  375. When the command that caused the error occurred, the device was active or idle.
  376.  
  377. After command completion occurred, registers were:
  378. ER ST SC SN CL CH DH
  379. -- -- -- -- -- -- --
  380. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  381.  
  382. Commands leading to the command that caused the error were:
  383. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  384. -- -- -- -- -- -- -- -- ---------------- --------------------
  385. 60 00 08 a8 a5 15 41 00 00:19:30.785 READ FPDMA QUEUED
  386. ef 02 00 00 00 00 00 00 00:19:30.781 SET FEATURES [Enable write cache]
  387. 00 00 00 00 00 00 00 ff 00:19:30.668 NOP [Abort queued commands]
  388. 60 00 08 a8 a5 15 41 00 00:19:28.308 READ FPDMA QUEUED
  389. ef 02 00 00 00 00 00 00 00:19:28.308 SET FEATURES [Enable write cache]
  390.  
  391. SMART Self-test log structure revision number 1
  392. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  393. # 1 Short offline Completed without error 00% 4182 -
  394. # 2 Short offline Completed without error 00% 2 -
  395. # 3 Short offline Completed without error 00% 0 -
  396. # 4 Short offline Completed without error 00% 0 -
  397.  
  398. SMART Selective self-test log data structure revision number 1
  399. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  400. 1 0 0 Not_testing
  401. 2 0 0 Not_testing
  402. 3 0 0 Not_testing
  403. 4 0 0 Not_testing
  404. 5 0 0 Not_testing
  405. Selective self-test flags (0x0):
  406. After scanning selected spans, do NOT read-scan remainder of disk.
  407. If Selective self-test is pending on power-up, resume after 0 minute delay.
  408.  
  409. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-21-generic] (local build)
  410. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  411.  
  412. === START OF INFORMATION SECTION ===
  413. Model Family: Seagate Momentus 5400.6
  414. Device Model: ST9320325AS
  415. Serial Number: 6VD3GGBR
  416. LU WWN Device Id: 5 000c50 0282b12c8
  417. Firmware Version: D005DEM1
  418. User Capacity: 320,072,933,376 bytes [320 GB]
  419. Sector Size: 512 bytes logical/physical
  420. Rotation Rate: 5400 rpm
  421. Device is: In smartctl database [for details use: -P show]
  422. ATA Version is: ATA8-ACS T13/1699-D revision 4
  423. SATA Version is: SATA 2.6, 3.0 Gb/s
  424. Local Time is: Thu Apr 5 19:30:22 2018 UTC
  425. SMART support is: Available - device has SMART capability.
  426. SMART support is: Enabled
  427.  
  428. === START OF READ SMART DATA SECTION ===
  429. SMART overall-health self-assessment test result: PASSED
  430.  
  431. General SMART Values:
  432. Offline data collection status: (0x82) Offline data collection activity
  433. was completed without error.
  434. Auto Offline Data Collection: Enabled.
  435. Self-test execution status: ( 0) The previous self-test routine completed
  436. without error or no self-test has ever
  437. been run.
  438. Total time to complete Offline
  439. data collection: ( 0) seconds.
  440. Offline data collection
  441. capabilities: (0x7b) SMART execute Offline immediate.
  442. Auto Offline data collection on/off support.
  443. Suspend Offline collection upon new
  444. command.
  445. Offline surface scan supported.
  446. Self-test supported.
  447. Conveyance Self-test supported.
  448. Selective Self-test supported.
  449. SMART capabilities: (0x0003) Saves SMART data before entering
  450. power-saving mode.
  451. Supports SMART auto save timer.
  452. Error logging capability: (0x01) Error logging supported.
  453. General Purpose Logging supported.
  454. Short self-test routine
  455. recommended polling time: ( 2) minutes.
  456. Extended self-test routine
  457. recommended polling time: ( 99) minutes.
  458. Conveyance self-test routine
  459. recommended polling time: ( 3) minutes.
  460. SCT capabilities: (0x103f) SCT Status supported.
  461. SCT Error Recovery Control supported.
  462. SCT Feature Control supported.
  463. SCT Data Table supported.
  464.  
  465. SMART Attributes Data Structure revision number: 10
  466. Vendor Specific SMART Attributes with Thresholds:
  467. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  468. 1 Raw_Read_Error_Rate 0x000f 108 074 006 Pre-fail Always - 154239357
  469. 3 Spin_Up_Time 0x0003 098 098 085 Pre-fail Always - 0
  470. 4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 8046
  471. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  472. 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 330910491
  473. 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7324
  474. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  475. 12 Power_Cycle_Count 0x0032 093 093 020 Old_age Always - 7744
  476. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  477. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 27511
  478. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032879
  479. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  480. 190 Airflow_Temperature_Cel 0x0022 062 048 045 Old_age Always - 38 (Min/Max 32/38)
  481. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 305
  482. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 248
  483. 193 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 30509
  484. 194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 15 0 0 0)
  485. 195 Hardware_ECC_Recovered 0x001a 061 048 000 Old_age Always - 154239357
  486. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 7
  487. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 7
  488. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  489. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7214 (146 87 0)
  490. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 608467307
  491. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 251341597
  492. 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
  493.  
  494. SMART Error Log Version: 1
  495. ATA Error Count: 27508 (device log contains only the most recent five errors)
  496. CR = Command Register [HEX]
  497. FR = Features Register [HEX]
  498. SC = Sector Count Register [HEX]
  499. SN = Sector Number Register [HEX]
  500. CL = Cylinder Low Register [HEX]
  501. CH = Cylinder High Register [HEX]
  502. DH = Device/Head Register [HEX]
  503. DC = Device Command Register [HEX]
  504. ER = Error register [HEX]
  505. ST = Status register [HEX]
  506. Powered_Up_Time is measured from power on, and printed as
  507. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  508. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  509.  
  510. Error 27508 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  511. When the command that caused the error occurred, the device was active or idle.
  512.  
  513. After command completion occurred, registers were:
  514. ER ST SC SN CL CH DH
  515. -- -- -- -- -- -- --
  516. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  517.  
  518. Commands leading to the command that caused the error were:
  519. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  520. -- -- -- -- -- -- -- -- ---------------- --------------------
  521. 60 00 08 a8 a5 15 41 00 00:19:40.646 READ FPDMA QUEUED
  522. ef 02 00 00 00 00 00 00 00:19:40.641 SET FEATURES [Enable write cache]
  523. 00 00 00 00 00 00 00 ff 00:19:40.529 NOP [Abort queued commands]
  524. 60 00 08 a8 a5 15 41 00 00:19:38.170 READ FPDMA QUEUED
  525. ef 02 00 00 00 00 00 00 00:19:38.170 SET FEATURES [Enable write cache]
  526.  
  527. Error 27507 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  528. When the command that caused the error occurred, the device was active or idle.
  529.  
  530. After command completion occurred, registers were:
  531. ER ST SC SN CL CH DH
  532. -- -- -- -- -- -- --
  533. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  534.  
  535. Commands leading to the command that caused the error were:
  536. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  537. -- -- -- -- -- -- -- -- ---------------- --------------------
  538. 60 00 08 a8 a5 15 41 00 00:19:38.170 READ FPDMA QUEUED
  539. ef 02 00 00 00 00 00 00 00:19:38.170 SET FEATURES [Enable write cache]
  540. 00 00 00 00 00 00 00 ff 00:19:38.074 NOP [Abort queued commands]
  541. 60 00 08 a8 a5 15 41 00 00:19:35.715 READ FPDMA QUEUED
  542. ef 02 00 00 00 00 00 00 00:19:35.711 SET FEATURES [Enable write cache]
  543.  
  544. Error 27506 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  545. When the command that caused the error occurred, the device was active or idle.
  546.  
  547. After command completion occurred, registers were:
  548. ER ST SC SN CL CH DH
  549. -- -- -- -- -- -- --
  550. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  551.  
  552. Commands leading to the command that caused the error were:
  553. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  554. -- -- -- -- -- -- -- -- ---------------- --------------------
  555. 60 00 08 a8 a5 15 41 00 00:19:35.715 READ FPDMA QUEUED
  556. ef 02 00 00 00 00 00 00 00:19:35.711 SET FEATURES [Enable write cache]
  557. 00 00 00 00 00 00 00 ff 00:19:35.599 NOP [Abort queued commands]
  558. 60 00 08 a8 a5 15 41 00 00:19:33.239 READ FPDMA QUEUED
  559. ef 02 00 00 00 00 00 00 00:19:33.239 SET FEATURES [Enable write cache]
  560.  
  561. Error 27505 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  562. When the command that caused the error occurred, the device was active or idle.
  563.  
  564. After command completion occurred, registers were:
  565. ER ST SC SN CL CH DH
  566. -- -- -- -- -- -- --
  567. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  568.  
  569. Commands leading to the command that caused the error were:
  570. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  571. -- -- -- -- -- -- -- -- ---------------- --------------------
  572. 60 00 08 a8 a5 15 41 00 00:19:33.239 READ FPDMA QUEUED
  573. ef 02 00 00 00 00 00 00 00:19:33.239 SET FEATURES [Enable write cache]
  574. 00 00 00 00 00 00 00 ff 00:19:33.144 NOP [Abort queued commands]
  575. 60 00 08 a8 a5 15 41 00 00:19:30.785 READ FPDMA QUEUED
  576. ef 02 00 00 00 00 00 00 00:19:30.781 SET FEATURES [Enable write cache]
  577.  
  578. Error 27504 occurred at disk power-on lifetime: 7324 hours (305 days + 4 hours)
  579. When the command that caused the error occurred, the device was active or idle.
  580.  
  581. After command completion occurred, registers were:
  582. ER ST SC SN CL CH DH
  583. -- -- -- -- -- -- --
  584. 40 51 00 ab a5 15 01 Error: UNC at LBA = 0x0115a5ab = 18195883
  585.  
  586. Commands leading to the command that caused the error were:
  587. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  588. -- -- -- -- -- -- -- -- ---------------- --------------------
  589. 60 00 08 a8 a5 15 41 00 00:19:30.785 READ FPDMA QUEUED
  590. ef 02 00 00 00 00 00 00 00:19:30.781 SET FEATURES [Enable write cache]
  591. 00 00 00 00 00 00 00 ff 00:19:30.668 NOP [Abort queued commands]
  592. 60 00 08 a8 a5 15 41 00 00:19:28.308 READ FPDMA QUEUED
  593. ef 02 00 00 00 00 00 00 00:19:28.308 SET FEATURES [Enable write cache]
  594.  
  595. SMART Self-test log structure revision number 1
  596. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  597. # 1 Short offline Completed without error 00% 4182 -
  598. # 2 Short offline Completed without error 00% 2 -
  599. # 3 Short offline Completed without error 00% 0 -
  600. # 4 Short offline Completed without error 00% 0 -
  601.  
  602. SMART Selective self-test log data structure revision number 1
  603. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  604. 1 0 0 Not_testing
  605. 2 0 0 Not_testing
  606. 3 0 0 Not_testing
  607. 4 0 0 Not_testing
  608. 5 0 0 Not_testing
  609. Selective self-test flags (0x0):
  610. After scanning selected spans, do NOT read-scan remainder of disk.
  611. If Selective self-test is pending on power-up, resume after 0 minute delay.
  612.  
  613. ubuntu@ubuntu:~$
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!