Advertisement
Guest User

Untitled

a guest
Nov 7th, 2014
264
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.70 KB | None | 0 0
  1. U-Boot SPL 2014.01-09730-gb5bd4c9 (Mar 08 2014 - 00:03:52)
  2. Board: Mele_A1000
  3. DRAM: 512 MiB
  4. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  5. spl: not an uImage at 1600
  6.  
  7.  
  8. U-Boot 2014.01-09730-gb5bd4c9 (Mar 08 2014 - 00:03:52) Allwinner Technology
  9.  
  10. CPU: Allwinner A10 (SUN4I)
  11. Board: Mele_A1000
  12. I2C: ready
  13. DRAM: 512 MiB
  14. MMC: SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Net: emac
  21. Hit any key to stop autoboot: 0
  22. reading uEnv.txt
  23. ** Unable to read file uEnv.txt **
  24. Failed to mount ext2 filesystem...
  25. ** Unrecognized filesystem type **
  26. Failed to mount ext2 filesystem...
  27. ** Unrecognized filesystem type **
  28. reading boot.scr
  29. 294 bytes read in 3 ms (95.7 KiB/s)
  30. Jumping to boot.scr
  31. ## Executing script at 44000000
  32. reading sun4i-a10-a1000.dtb
  33. 17159 bytes read in 6 ms (2.7 MiB/s)
  34. reading uImage
  35. 4263272 bytes read in 203 ms (20 MiB/s)
  36. ## Booting kernel from Legacy Image at 46000000 ...
  37. Image Name: Linux-3.16.0
  38. Created: 2014-08-13 20:32:50 UTC
  39. Image Type: ARM Linux Kernel Image (uncompressed)
  40. Data Size: 4263208 Bytes = 4.1 MiB
  41. Load Address: 40008000
  42. Entry Point: 40008000
  43. Verifying Checksum ... OK
  44. ## Flattened Device Tree blob at 49000000
  45. Booting using the fdt blob at 0x49000000
  46. Loading Kernel Image ... OK
  47. Using Device Tree in place at 49000000, end 49007306
  48.  
  49. Starting kernel ...
  50.  
  51. [ 0.000000] Booting Linux on physical CPU 0x0
  52. [ 0.000000] Linux version 3.16.0 (matthew@darjeeling) (gcc version 4.8.1 (Fedora 2013.11.24-2.fc20) ) #3 Wed Aug 13 15:32:37 CDT 2014
  53. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  54. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. [ 0.000000] Machine model: Mele A1000
  56. [ 0.000000] Memory policy: Data cache writeback
  57. [ 0.000000] On node 0 totalpages: 131072
  58. [ 0.000000] free_area_init_node: node 0, pgdat c06ac540, node_mem_map dfbfa000
  59. [ 0.000000] Normal zone: 1024 pages used for memmap
  60. [ 0.000000] Normal zone: 0 pages reserved
  61. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  62. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  63. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  64. [ 0.000000] pcpu-alloc: [0] 0
  65. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  66. [ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=9 earlyprintk rootwait root=/dev/mmcblk0p2
  67. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  68. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  69. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  70. [ 0.000000] Memory: 512584K/524288K available (4478K kernel code, 268K rwdata, 1896K rodata, 155K init, 257K bss, 11704K reserved, 0K highmem)
  71. [ 0.000000] Virtual kernel memory layout:
  72. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  73. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  74. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  75. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  76. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  77. [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
  78. [ 0.000000] .text : 0xc0008000 - 0xc0641a6c (6375 kB)
  79. [ 0.000000] .init : 0xc0642000 - 0xc0668dc4 ( 156 kB)
  80. [ 0.000000] .data : 0xc066a000 - 0xc06ad0c0 ( 269 kB)
  81. [ 0.000000] .bss : 0xc06ad0c0 - 0xc06ed4e8 ( 258 kB)
  82. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  83. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  84. [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  85. [ 0.000216] Console: colour dummy device 80x30
  86. [ 0.000233] Calibrating delay loop... 1007.61 BogoMIPS (lpj=5038080)
  87. [ 0.090124] pid_max: default: 32768 minimum: 301
  88. [ 0.090208] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  89. [ 0.090216] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  90. [ 0.090614] CPU: Testing write buffer coherency: ok
  91. [ 0.090829] Setting up static identity map for 0x40436150 - 0x4043619c
  92. [ 0.091613] devtmpfs: initialized
  93. [ 0.092226] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  94. [ 0.092481] xor: measuring software checksum speed
  95. [ 0.190066] arm4regs : 1256.800 MB/sec
  96. [ 0.290064] 8regs : 1084.000 MB/sec
  97. [ 0.390065] 32regs : 898.000 MB/sec
  98. [ 0.490062] neon : 1832.400 MB/sec
  99. [ 0.490068] xor: using function: neon (1832.400 MB/sec)
  100. [ 0.490163] pinctrl core: initialized pinctrl subsystem
  101. [ 0.490417] regulator-dummy: no parameters
  102. [ 0.493910] NET: Registered protocol family 16
  103. [ 0.494435] DMA: preallocated 256 KiB pool for atomic coherent allocations
  104. [ 0.494955] cpuidle: using governor ladder
  105. [ 0.494971] cpuidle: using governor menu
  106. [ 0.497527] hw-breakpoint: debug architecture 0x4 unsupported.
  107. [ 0.670200] raid6: int32x1 215 MB/s
  108. [ 0.840246] raid6: int32x2 335 MB/s
  109. [ 1.010091] raid6: int32x4 342 MB/s
  110. [ 1.180107] raid6: int32x8 325 MB/s
  111. [ 1.350074] raid6: neonx1 1422 MB/s
  112. [ 1.520075] raid6: neonx2 1836 MB/s
  113. [ 1.690087] raid6: neonx4 1907 MB/s
  114. [ 1.860113] raid6: neonx8 706 MB/s
  115. [ 1.860119] raid6: using algorithm neonx4 (1907 MB/s)
  116. [ 1.860124] raid6: using intx1 recovery algorithm
  117. [ 1.860320] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  118. [ 1.860341] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
  119. [ 1.860360] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  120. [ 1.860371] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
  121. [ 1.860525] vcc3v0: 3000 mV
  122. [ 1.860710] vcc3v3: 3300 mV
  123. [ 1.860773] reg-fixed-voltage emac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/emac_power_pin@0, deferring probe
  124. [ 1.860784] platform emac-3v3: Driver reg-fixed-voltage requests probe deferral
  125. [ 1.861182] SCSI subsystem initialized
  126. [ 1.861333] libata version 3.00 loaded.
  127. [ 1.861610] usbcore: registered new interface driver usbfs
  128. [ 1.861667] usbcore: registered new interface driver hub
  129. [ 1.861751] usbcore: registered new device driver usb
  130. [ 1.861880] pps_core: LinuxPPS API ver. 1 registered
  131. [ 1.861886] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  132. [ 1.861911] PTP clock support registered
  133. [ 1.862183] Advanced Linux Sound Architecture Driver Initialized.
  134. [ 1.863350] Switched to clocksource timer
  135. [ 1.863597] FS-Cache: Loaded
  136. [ 1.866905] cfg80211: Calling CRDA to update world regulatory domain
  137. [ 1.870891] NET: Registered protocol family 2
  138. [ 1.871445] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  139. [ 1.871492] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  140. [ 1.871528] TCP: Hash tables configured (established 4096 bind 4096)
  141. [ 1.871580] TCP: reno registered
  142. [ 1.871589] UDP hash table entries: 256 (order: 0, 4096 bytes)
  143. [ 1.871603] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  144. [ 1.871722] NET: Registered protocol family 1
  145. [ 1.871952] RPC: Registered named UNIX socket transport module.
  146. [ 1.871961] RPC: Registered udp transport module.
  147. [ 1.871967] RPC: Registered tcp transport module.
  148. [ 1.871972] RPC: Registered tcp NFSv4.1 backchannel transport module.
  149. [ 1.873054] futex hash table entries: 256 (order: -1, 3072 bytes)
  150. [ 1.882781] NFS: Registering the id_resolver key type
  151. [ 1.882829] Key type id_resolver registered
  152. [ 1.882836] Key type id_legacy registered
  153. [ 1.882856] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  154. [ 1.882867] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  155. [ 1.883899] ntfs: driver 2.1.30 [Flags: R/O].
  156. [ 1.884204] fuse init (API version 7.23)
  157. [ 1.884908] msgmni has been set to 1001
  158. [ 1.886063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  159. [ 1.886077] io scheduler noop registered
  160. [ 1.886087] io scheduler deadline registered
  161. [ 1.886120] io scheduler cfq registered (default)
  162. [ 1.886294] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  163. [ 1.887701] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  164. [ 1.932113] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  165. [ 1.934455] console [ttyS0] disabled
  166. [ 1.954611] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 27, base_baud = 1500000) is a U6_16550A
  167. [ 2.601861] console [ttyS0] enabled
  168. [ 2.608865] loop: module loaded
  169. [ 2.673400] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  170. [ 2.680878] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
  171. [ 2.686764] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  172. [ 2.695723] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
  173. [ 2.704541] scsi0 : ahci_platform
  174. [ 2.708144] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 21
  175. [ 2.716988] platform 1c0b080.mdio: Driver sun4i-mdio requests probe deferral
  176. [ 2.724411] sun4i-emac 1c0b000.ethernet: using random MAC address 7e:ee:b7:67:da:bb
  177. [ 2.733993] sun4i-emac 1c0b000.ethernet: eth0: at e08be000, IRQ 17 MAC: 7e:ee:b7:67:da:bb
  178. [ 2.742271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  179. [ 2.748817] ehci-platform: EHCI generic platform driver
  180. [ 2.754134] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  181. [ 2.761391] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  182. [ 2.768675] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  183. [ 2.774873] ohci-platform: OHCI generic platform driver
  184. [ 2.780157] platform 1c14400.usb: Driver ohci-platform requests probe deferral
  185. [ 2.787423] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
  186. [ 2.794758] usbcore: registered new interface driver cdc_acm
  187. [ 2.800408] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  188. [ 2.808476] usbcore: registered new interface driver usblp
  189. [ 2.814036] usbcore: registered new interface driver usb-storage
  190. [ 2.820407] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
  191. [ 2.827206] sunxi-rtc 1c20d00.rtc: RTC enabled
  192. [ 2.831694] i2c /dev entries driver
  193. [ 2.836081] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  194. [ 2.844347] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  195. [ 2.850216] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
  196. [ 2.893381] sunxi-mmc 1c0f000.mmc: base:0xe08c6000 irq:18
  197. [ 2.899912] usbcore: registered new interface driver usbhid
  198. [ 2.905502] usbhid: USB HID core driver
  199. [ 2.910511] specify port
  200. [ 2.914188] snd_mpu401: probe of snd_mpu401.0 failed with error -22
  201. [ 2.922852] usbcore: registered new interface driver snd-usb-audio
  202. [ 2.929092] Netfilter messages via NETLINK v0.30.
  203. [ 2.933822] nf_conntrack version 0.5.0 (8009 buckets, 32036 max)
  204. [ 2.940289] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
  205. [ 2.946857] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
  206. [ 2.954377] ip_tables: (C) 2000-2006 Netfilter Core Team
  207. [ 2.960866] arp_tables: (C) 2002 David S. Miller
  208. [ 2.967606] TCP: cubic registered
  209. [ 2.970937] Initializing XFRM netlink socket
  210. [ 2.975254] NET: Registered protocol family 17
  211. [ 2.979788] Bridge firewalling registered
  212. [ 2.983878] 8021q: 802.1Q VLAN Support v1.8
  213. [ 2.988224] Key type dns_resolver registered
  214. [ 2.992613] ThumbEE CPU extension supported.
  215. [ 2.996930] Registering SWP/SWPB emulation handler
  216. [ 3.004218] Btrfs loaded
  217. [ 3.007307] usb1-vbus: 5000 mV
  218. [ 3.010770] usb2-vbus: 5000 mV
  219. [ 3.014213] emac-3v3: 3300 mV
  220. [ 3.017283] mmc0: host does not support reading read-only switch. assuming write-enable.
  221. [ 3.026014] libphy: sun4i_mii_bus: probed
  222. [ 3.030030] sun4i-mdio 1c0b080.mdio-mii: /soc@01c00000/mdio@01c0b080/ethernet-phy@1 has invalid PHY address
  223. [ 3.039781] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 0
  224. [ 3.050748] mmc0: new high speed SDHC card at address e624
  225. [ 3.056532] mmcblk0: mmc0:e624 SU16G 14.8 GiB
  226. [ 3.063155] mmcblk0: p1 p2
  227. [ 3.066001] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  228. [ 3.078474] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
  229. [ 3.085363] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  230. [ 3.092167] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 1
  231. [ 3.105364] ata1.00: configured for UDMA/133
  232. [ 3.109891] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
  233. [ 3.118644] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  234. [ 3.126308] sd 0:0:0:0: [sda] 4096-byte physical blocks
  235. [ 3.131760] sd 0:0:0:0: Attached scsi generic sg0 type 0
  236. [ 3.137625] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 2
  237. [ 3.144808] sd 0:0:0:0: [sda] Write Protect is off
  238. [ 3.149597] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  239. [ 3.154719] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  240. [ 3.192443] sda: sda1 sda2
  241. [ 3.195305] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 3
  242. [ 3.203083] sd 0:0:0:0: [sda] Attached SCSI disk
  243. [ 3.233371] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 4
  244. [ 3.273365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 5
  245. [ 3.313365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 6
  246. [ 3.353365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 7
  247. [ 3.393364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 8
  248. [ 3.433365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 9
  249. [ 3.473364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 10
  250. [ 3.513365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 11
  251. [ 3.553365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 12
  252. [ 3.593364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 13
  253. [ 3.633365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 14
  254. [ 3.673365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 15
  255. [ 3.713365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 16
  256. [ 3.753367] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 17
  257. [ 3.793364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 18
  258. [ 3.833365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 19
  259. [ 3.873365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 20
  260. [ 3.913365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 21
  261. [ 3.953365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 22
  262. [ 3.993365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 23
  263. [ 4.033368] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 24
  264. [ 4.073365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 25
  265. [ 4.113364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 26
  266. [ 4.153365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 27
  267. [ 4.193365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 28
  268. [ 4.233364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 29
  269. [ 4.273364] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 30
  270. [ 4.313365] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 31
  271. [ 4.353608] ehci-platform 1c14000.usb: EHCI Host Controller
  272. [ 4.359193] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  273. [ 4.367039] ehci-platform 1c14000.usb: irq 19, io mem 0x01c14000
  274. [ 4.383379] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  275. [ 4.390088] hub 1-0:1.0: USB hub found
  276. [ 4.393873] hub 1-0:1.0: 1 port detected
  277. [ 4.398229] ehci-platform 1c1c000.usb: EHCI Host Controller
  278. [ 4.403830] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  279. [ 4.411656] ehci-platform 1c1c000.usb: irq 22, io mem 0x01c1c000
  280. [ 4.433376] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  281. [ 4.440024] hub 2-0:1.0: USB hub found
  282. [ 4.443806] hub 2-0:1.0: 1 port detected
  283. [ 4.448135] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  284. [ 4.454778] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
  285. [ 4.462570] ohci-platform 1c14400.usb: irq 20, io mem 0x01c14400
  286. [ 4.527914] hub 3-0:1.0: USB hub found
  287. [ 4.531674] hub 3-0:1.0: 1 port detected
  288. [ 4.536028] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  289. [ 4.542649] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
  290. [ 4.550504] ohci-platform 1c1c400.usb: irq 23, io mem 0x01c1c400
  291. [ 4.617917] hub 4-0:1.0: USB hub found
  292. [ 4.621682] hub 4-0:1.0: 1 port detected
  293. [ 4.625932] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:09 UTC (1262304009)
  294. [ 4.637350] vcc3v0: disabling
  295. [ 4.640415] ALSA device list:
  296. [ 4.643423] No soundcards found.
  297. [ 4.648110] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  298. [ 4.658056] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  299. [ 4.686982] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  300. [ 4.695121] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  301. [ 4.702817] devtmpfs: mounted
  302. [ 4.705966] Freeing unused kernel memory: 152K (c0642000 - c0668000)
  303. [ 4.713410] usb 1-1: new high-speed USB device number 2 using ehci-platform
  304. [ 4.865728] hub 1-1:1.0: USB hub found
  305. [ 4.870450] hub 1-1:1.0: 4 ports detected
  306. [ 4.930500] systemd[1]: Failed to mount tmpfs at /sys/fs/cgroup: No such file or directory
  307. [ 4.993388] usb 2-1: new high-speed USB device number 2 using ehci-platform
  308. [ 5.223690] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  309. [ 5.334219] hub 1-1.1:1.0: USB hub found
  310. [ 5.338309] hub 1-1.1:1.0: 4 ports detected
  311. [ 5.423685] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
  312. [ 5.554779] input: Schiit Schiit USB Audio Device as /devices/soc@01c00000/1c14000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:0D8C:1319.0001/input/input0
  313. [ 5.567914] hid-generic 0003:0D8C:1319.0001: input: USB HID v1.00 Device [Schiit Schiit USB Audio Device] on usb-1c14000.usb-1.2/input2
  314. [ 5.673437] usb 1-1.1.1: new high-speed USB device number 5 using ehci-platform
  315. [ 5.804201] hub 1-1.1.1:1.0: USB hub found
  316. [ 5.808436] hub 1-1.1.1:1.0: 4 ports detected
  317. [ 5.893439] usb 1-1.1.3: new high-speed USB device number 6 using ehci-platform
  318. [ 6.025713] usb-storage 1-1.1.3:1.0: USB Mass Storage device detected
  319. [ 6.032345] scsi1 : usb-storage 1-1.1.3:1.0
  320. [ 6.133439] usb 1-1.1.4: new high-speed USB device number 7 using ehci-platform
  321. [ 6.264208] hub 1-1.1.4:1.0: USB hub found
  322. [ 6.268436] hub 1-1.1.4:1.0: 4 ports detected
  323. [ 7.034277] scsi 1:0:0:0: Direct-Access Seagate Backup+ BL 0836 PQ: 0 ANSI: 6
  324. [ 7.043217] sd 1:0:0:0: Attached scsi generic sg1 type 0
  325. [ 7.048712] sd 1:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
  326. [ 7.057200] sd 1:0:0:0: [sdb] Write Protect is off
  327. [ 7.061988] sd 1:0:0:0: [sdb] Mode Sense: 2b 00 10 08
  328. [ 7.067824] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  329. [ 7.082009] sdb: sdb1
  330. [ 7.087323] sd 1:0:0:0: [sdb] Attached SCSI disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement