U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:57:02)
DRAM: 2048 MiB
Trying to boot from MMC2


U-Boot 2017.11-armbian (Jan 25 2018 - 07:57:02 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Plus 2E
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   phy interface7
eth0: ethernet@1c30000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
USB4:   USB EHCI 1.00
USB5:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 3 for devices... 2 USB Device(s) found
scanning bus 5 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
2913 bytes read in 146 ms (18.6 KiB/s)
## Executing script at 43100000
gpio: pin PL10 (gpio 298) value is 1
gpio: pin PG11 (gpio 203) value is 1
MMC: no card present
mmc_init: -123, time 4
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 3
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 3
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 3
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 3
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 3
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 10
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 10
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 10
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 11
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 10
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 10
** Bad device mmc 0 **
MMC: no card present
mmc_init: -123, time 10
** Bad device mmc 0 **
SCRIPT FAILED: continuing...
MMC: no card present
mmc_init: -123, time 10

Device 0: device type unknown
... is now current device
** Bad device usb 0 **
** Bad device usb 0 **
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
DHCP client bound to address 172.16.10.10 (4272 ms)
*** Warning: no boot file name; using 'AC100A0A.img'
Using ethernet@1c30000 device
TFTP from server 172.16.10.2; our IP address is 172.16.10.10
Filename 'AC100A0A.img'.
Load address: 0x42000000
Loading: T T T T