Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.19.3-g326cdcc-dirty (tonyd@devbox1) (gcc version 4.9.x-google 20150123 (prerelease) (4.9.2_cos_gg_f24b131_4.9.2-r111) ) #1 SMP Sun Oct 18 15:26:31 BST 2015
- [ 0.000000] Command line: init=/sbin/init boot=local rootwait ro noresume noswap loglevel=7 noinitrd console=tty2 quiet root=PARTUUID=C6E8359F-9127-B848-8E09-93285ACD42C3 i915.modeset=1 cros_legacy cros_debug BOOT_IMAGE=vmlinuz.A
- [ 0.000000] tseg: 0077f80000
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077f4ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000077f50000-0x0000000077f64fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x0000000077f65000-0x0000000077f65fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000077f66000-0x000000007fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv2500 Notebook PC/30D6, BIOS F.28 03/02/2011
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x77f50 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D3FFF write-protect
- [ 0.000000] D4000-DBFFF uncachable
- [ 0.000000] DC000-DFFFF write-protect
- [ 0.000000] E0000-E3FFF uncachable
- [ 0.000000] E4000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
- [ 0.000000] found SMP MP-table at [mem 0x000f8090-0x000f809f] mapped at [ffff8800000f8090]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01cd9000, 0x01cd9fff] PGTABLE
- [ 0.000000] BRK [0x01cda000, 0x01cdafff] PGTABLE
- [ 0.000000] BRK [0x01cdb000, 0x01cdbfff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x77c00000-0x77dfffff]
- [ 0.000000] [mem 0x77c00000-0x77dfffff] page 2M
- [ 0.000000] BRK [0x01cdc000, 0x01cdcfff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x60000000-0x77bfffff]
- [ 0.000000] [mem 0x60000000-0x77bfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
- [ 0.000000] [mem 0x40000000-0x5fffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x77e00000-0x77f4ffff]
- [ 0.000000] [mem 0x77e00000-0x77f4ffff] page 4k
- [ 0.000000] BRK [0x01cdd000, 0x01cddfff] PGTABLE
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F80C0 000024 (v03 HPQOEM)
- [ 0.000000] ACPI: XSDT 0x0000000077F5D343 00006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
- [ 0.000000] ACPI: FACP 0x0000000077F64874 0000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240)
- [ 0.000000] ACPI: DSDT 0x0000000077F5D3AF 0074C5 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000)
- [ 0.000000] ACPI: FACS 0x0000000077F65FC0 000040
- [ 0.000000] ACPI: SLIC 0x0000000077F649DC 000176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001)
- [ 0.000000] ACPI: WDAT 0x0000000077F64B52 000104 (v01 PTLTD WDATTBL 06040000 LTP 00000001)
- [ 0.000000] ACPI: SRAT 0x0000000077F64C56 0000A0 (v01 AMD HAMMER 06040000 AMD 00000001)
- [ 0.000000] ACPI: MCFG 0x0000000077F64CF6 00003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
- [ 0.000000] ACPI: HPET 0x0000000077F64D32 000038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
- [ 0.000000] ACPI: APIC 0x0000000077F64D6A 000068 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT 0x0000000077F64DD2 000028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
- [ 0.000000] ACPI: SSDT 0x0000000077F64DFA 000206 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880075800000-ffff8800775fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0x77f4ffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
- [ 0.000000] node 0: [mem 0x00100000-0x77f4ffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x77f4ffff]
- [ 0.000000] On node 0 totalpages: 491245
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 7614 pages used for memmap
- [ 0.000000] DMA32 zone: 487248 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000fffff]
- [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880077c00000 s80512 r8192 d30080 u1048576
- [ 0.000000] pcpu-alloc: s80512 r8192 d30080 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483546
- [ 0.000000] Kernel command line: init=/sbin/init boot=local rootwait ro noresume noswap loglevel=7 noinitrd console=tty2 quiet root=PARTUUID=C6E8359F-9127-B848-8E09-93285ACD42C3 i915.modeset=1 cros_legacy cros_debug BOOT_IMAGE=vmlinuz.A
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Memory: 1917552K/1964980K available (5710K kernel code, 913K rwdata, 2396K rodata, 1148K init, 824K bss, 47428K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:4352 nr_irqs:440 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty2] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 1900.171 MHz processor
- [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
- [ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.34 BogoMIPS (lpj=1900171)
- [ 0.001011] pid_max: default: 32768 minimum: 301
- [ 0.001020] ACPI: Core revision 20141107
- [ 0.008643] ACPI: All ACPI Tables successfully acquired
- [ 0.009045] Security Framework initialized
- [ 0.009051] Yama: becoming mindful.
- [ 0.009072] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.009075] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.009423] Initializing cgroup subsys freezer
- [ 0.009445] CPU: Physical Processor ID: 0
- [ 0.009447] CPU: Processor Core ID: 0
- [ 0.009450] mce: CPU supports 5 MCE banks
- [ 0.009458] process: using AMD E400 aware idle routine
- [ 0.009461] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
- [ 0.009567] Freeing SMP alternatives memory: 16K (ffffffff81c05000 - ffffffff81c09000)
- [ 0.009571] ftrace: allocating 26789 entries in 105 pages
- [ 0.021694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.032097] smpboot: CPU0: AMD Turion(tm) 64 X2 TL-58 (fam: 0f, model: 68, stepping: 02)
- [ 0.033000] Performance Events: AMD PMU driver.
- [ 0.033000] ... version: 0
- [ 0.033000] ... bit width: 48
- [ 0.033000] ... generic registers: 4
- [ 0.033000] ... value mask: 0000ffffffffffff
- [ 0.033000] ... max period: 00007fffffffffff
- [ 0.033000] ... fixed-purpose events: 0
- [ 0.033000] ... event mask: 000000000000000f
- [ 0.033000] x86: Booting SMP configuration:
- [ 0.033000] .... node #0, CPUs: #1
- [ 0.043660] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.002000] process: System has AMD C1E enabled
- [ 0.002000] process: Switch to broadcast mode on CPU1
- [ 0.103063] x86: Booted up 1 node, 2 CPUs
- [ 0.103067] smpboot: Total of 2 processors activated (7600.41 BogoMIPS)
- [ 0.103619] process: Switch to broadcast mode on CPU0
- [ 0.103619] devtmpfs: initialized
- [ 0.104316] PM: Registering ACPI NVS region [mem 0x77f65000-0x77f65fff] (4096 bytes)
- [ 0.104330] pinctrl core: initialized pinctrl subsystem
- [ 0.104330] RTC time: 22:57:29, date: 12/10/15
- [ 0.105118] NET: Registered protocol family 16
- [ 0.111007] cpuidle: using governor ladder
- [ 0.117004] cpuidle: using governor menu
- [ 0.117013] node 0 link 0: io port [1000, fffff]
- [ 0.117017] TOM: 0000000080000000 aka 2048M
- [ 0.117020] node 0 link 0: mmio [a0000, bffff]
- [ 0.117024] node 0 link 0: mmio [80000000, dfffffff]
- [ 0.117027] node 0 link 0: mmio [e0000000, efffffff]
- [ 0.117030] node 0 link 0: mmio [f0000000, fe0bffff]
- [ 0.117034] bus: [bus 00-ff] on node 0 link 0
- [ 0.117037] bus: 00 [io 0x0000-0xffff]
- [ 0.117039] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.117042] bus: 00 [mem 0x80000000-0xfcffffffff]
- [ 0.117197] ACPI: bus type PCI registered
- [ 0.117329] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
- [ 0.117333] PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
- [ 0.117370] PCI: Using configuration type 1 for base access
- [ 0.126171] ACPI: Added _OSI(Module Device)
- [ 0.126171] ACPI: Added _OSI(Processor Device)
- [ 0.126171] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.126171] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.131461] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.144129] ACPI: Interpreter enabled
- [ 0.144141] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
- [ 0.144147] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
- [ 0.144174] ACPI: (supports S0 S3 S4 S5)
- [ 0.144176] ACPI: Using IOAPIC for interrupt routing
- [ 0.144225] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.170093] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.170104] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.170254] acpi PNP0A08:00: _OSC: platform does not support [PME]
- [ 0.170386] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
- [ 0.170495] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf3ff])
- [ 0.170500] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff])
- [ 0.170507] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-09] only partially covers this bridge
- [ 0.170578] PCI host bridge to bus 0000:00
- [ 0.170583] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.170586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.170590] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.170594] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.170598] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
- [ 0.170601] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
- [ 0.170605] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
- [ 0.170609] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.170612] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.170616] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.170620] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- [ 0.170624] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- [ 0.170628] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
- [ 0.170631] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
- [ 0.170635] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
- [ 0.170642] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
- [ 0.170669] pci 0000:00:00.0: [10de:0547] type 00 class 0x050000
- [ 0.170973] pci 0000:00:01.0: [10de:0548] type 00 class 0x060100
- [ 0.171142] pci 0000:00:01.1: [10de:0542] type 00 class 0x0c0500
- [ 0.171156] pci 0000:00:01.1: reg 0x10: [io 0x3080-0x30bf]
- [ 0.171176] pci 0000:00:01.1: reg 0x20: [io 0x3040-0x307f]
- [ 0.171183] pci 0000:00:01.1: reg 0x24: [io 0x3000-0x303f]
- [ 0.171219] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.171366] pci 0000:00:01.2: [10de:0541] type 00 class 0x050000
- [ 0.171522] pci 0000:00:01.3: [10de:0543] type 00 class 0x0b4000
- [ 0.171541] pci 0000:00:01.3: reg 0x10: [mem 0xfc200000-0xfc27ffff]
- [ 0.171764] pci 0000:00:02.0: [10de:055e] type 00 class 0x0c0310
- [ 0.171776] pci 0000:00:02.0: reg 0x10: [mem 0xfc486000-0xfc486fff]
- [ 0.171820] pci 0000:00:02.0: supports D1 D2
- [ 0.171823] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.171972] pci 0000:00:02.1: [10de:055f] type 00 class 0x0c0320
- [ 0.171985] pci 0000:00:02.1: reg 0x10: [mem 0xfc489000-0xfc4890ff]
- [ 0.172040] pci 0000:00:02.1: supports D1 D2
- [ 0.172044] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.172200] pci 0000:00:04.0: [10de:055e] type 00 class 0x0c0310
- [ 0.172212] pci 0000:00:04.0: reg 0x10: [mem 0xfc487000-0xfc487fff]
- [ 0.172256] pci 0000:00:04.0: supports D1 D2
- [ 0.172259] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.172409] pci 0000:00:04.1: [10de:055f] type 00 class 0x0c0320
- [ 0.172423] pci 0000:00:04.1: reg 0x10: [mem 0xfc489400-0xfc4894ff]
- [ 0.172474] pci 0000:00:04.1: supports D1 D2
- [ 0.172478] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.172633] pci 0000:00:06.0: [10de:0560] type 00 class 0x01018a
- [ 0.172660] pci 0000:00:06.0: reg 0x20: [io 0x30c0-0x30cf]
- [ 0.172673] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
- [ 0.172676] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
- [ 0.172679] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
- [ 0.172683] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
- [ 0.172828] pci 0000:00:07.0: [10de:055c] type 00 class 0x040300
- [ 0.172843] pci 0000:00:07.0: reg 0x10: [mem 0xfc480000-0xfc483fff]
- [ 0.172895] pci 0000:00:07.0: PME# supported from D3hot D3cold
- [ 0.173056] pci 0000:00:08.0: [10de:0561] type 01 class 0x060401
- [ 0.173150] pci 0000:00:08.0: System wakeup disabled by ACPI
- [ 0.173247] pci 0000:00:09.0: [10de:0550] type 00 class 0x010185
- [ 0.173260] pci 0000:00:09.0: reg 0x10: [io 0x30f0-0x30f7]
- [ 0.173266] pci 0000:00:09.0: reg 0x14: [io 0x30e4-0x30e7]
- [ 0.173273] pci 0000:00:09.0: reg 0x18: [io 0x30e8-0x30ef]
- [ 0.173280] pci 0000:00:09.0: reg 0x1c: [io 0x30e0-0x30e3]
- [ 0.173286] pci 0000:00:09.0: reg 0x20: [io 0x30d0-0x30df]
- [ 0.173293] pci 0000:00:09.0: reg 0x24: [mem 0xfc484000-0xfc485fff]
- [ 0.173458] pci 0000:00:0a.0: [10de:054c] type 00 class 0x020000
- [ 0.173472] pci 0000:00:0a.0: reg 0x10: [mem 0xfc488000-0xfc488fff]
- [ 0.173479] pci 0000:00:0a.0: reg 0x14: [io 0x30f8-0x30ff]
- [ 0.173486] pci 0000:00:0a.0: reg 0x18: [mem 0xfc489c00-0xfc489cff]
- [ 0.173493] pci 0000:00:0a.0: reg 0x1c: [mem 0xfc489800-0xfc48980f]
- [ 0.173534] pci 0000:00:0a.0: supports D1 D2
- [ 0.173538] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175053] pci 0000:00:0a.0: System wakeup disabled by ACPI
- [ 0.175155] pci 0000:00:0c.0: [10de:0563] type 01 class 0x060400
- [ 0.175199] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175349] pci 0000:00:0d.0: [10de:0563] type 01 class 0x060400
- [ 0.175390] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175541] pci 0000:00:12.0: [10de:0531] type 00 class 0x030000
- [ 0.175552] pci 0000:00:12.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
- [ 0.175560] pci 0000:00:12.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.175568] pci 0000:00:12.0: reg 0x1c: [mem 0xf0000000-0xf0ffffff 64bit]
- [ 0.175578] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.175731] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.175867] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.175999] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.176134] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.176348] pci 0000:01:09.0: [1180:0832] type 00 class 0x0c0010
- [ 0.176362] pci 0000:01:09.0: reg 0x10: [mem 0x00000000-0x000007ff]
- [ 0.176415] pci 0000:01:09.0: supports D1 D2
- [ 0.176419] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.176523] pci 0000:01:09.1: [1180:0822] type 00 class 0x080500
- [ 0.176539] pci 0000:01:09.1: reg 0x10: [mem 0xfc100800-0xfc1008ff]
- [ 0.176601] pci 0000:01:09.1: supports D1 D2
- [ 0.176604] pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.176707] pci 0000:01:09.2: [1180:0843] type 00 class 0x088000
- [ 0.176722] pci 0000:01:09.2: reg 0x10: [mem 0xfc100c00-0xfc100cff]
- [ 0.176784] pci 0000:01:09.2: supports D1 D2
- [ 0.176787] pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.176893] pci 0000:01:09.3: [1180:0592] type 00 class 0x088000
- [ 0.176909] pci 0000:01:09.3: reg 0x10: [mem 0xfc101000-0xfc1010ff]
- [ 0.176971] pci 0000:01:09.3: supports D1 D2
- [ 0.176974] pci 0000:01:09.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177082] pci 0000:01:09.4: [1180:0852] type 00 class 0x088000
- [ 0.177097] pci 0000:01:09.4: reg 0x10: [mem 0xfc101400-0xfc1014ff]
- [ 0.177159] pci 0000:01:09.4: supports D1 D2
- [ 0.177162] pci 0000:01:09.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177284] pci 0000:00:08.0: PCI bridge to [bus 01-02] (subtractive decode)
- [ 0.177290] pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff]
- [ 0.177295] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.177299] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.177303] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.177307] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
- [ 0.177311] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
- [ 0.177314] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
- [ 0.177318] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.177322] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.177326] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
- [ 0.177330] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.177334] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.177338] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
- [ 0.177342] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
- [ 0.177346] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
- [ 0.177350] pci 0000:00:08.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
- [ 0.177413] pci 0000:00:0c.0: PCI bridge to [bus 06-07]
- [ 0.177418] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
- [ 0.177423] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
- [ 0.177503] pci 0000:04:00.0: [14e4:4311] type 00 class 0x028000
- [ 0.177524] pci 0000:04:00.0: reg 0x10: [mem 0xfc000000-0xfc003fff 64bit]
- [ 0.177624] pci 0000:04:00.0: supports D1 D2
- [ 0.179013] pci 0000:00:0d.0: PCI bridge to [bus 04-05]
- [ 0.179020] pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff]
- [ 0.179034] pci_bus 0000:00: on NUMA node 0
- [ 0.182413] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
- [ 0.182534] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15)
- [ 0.182653] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
- [ 0.182770] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
- [ 0.182889] ACPI: PCI Interrupt Link [LK1E] (IRQs 19 20 21 22 23) *0, disabled.
- [ 0.183011] ACPI: PCI Interrupt Link [LK2E] (IRQs 19 20 21 22 23) *0, disabled.
- [ 0.183130] ACPI: PCI Interrupt Link [LK3E] (IRQs 19 20 21 22 23) *0, disabled.
- [ 0.183247] ACPI: PCI Interrupt Link [LK4E] (IRQs 19 20 21 22 23) *10
- [ 0.183365] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
- [ 0.183480] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
- [ 0.183595] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
- [ 0.183718] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
- [ 0.183835] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
- [ 0.183957] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
- [ 0.184080] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled.
- [ 0.184199] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *5
- [ 0.184322] ACPI: PCI Interrupt Link [Z012] (IRQs 16) *10
- [ 0.184443] ACPI: PCI Interrupt Link [Z013] (IRQs 16) *11
- [ 0.184559] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
- [ 0.184667] ACPI: Enabled 1 GPEs in block 00 to 1F
- [ 0.184752] ACPI : EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
- [ 0.184920] vgaarb: setting as boot device: PCI:0000:00:12.0
- [ 0.184920] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.184920] vgaarb: loaded
- [ 0.184920] vgaarb: bridge control possible 0000:00:12.0
- [ 0.185101] SCSI subsystem initialized
- [ 0.185128] libata version 3.00 loaded.
- [ 0.185128] ACPI: bus type USB registered
- [ 0.185175] usbcore: registered new interface driver usbfs
- [ 0.185203] usbcore: registered new interface driver hub
- [ 0.185235] usbcore: registered new device driver usb
- [ 0.185335] Linux video capture interface: v2.00
- [ 0.185488] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.185493] PCI: Using ACPI for IRQ routing
- [ 0.185657] PCI: pci_cache_line_size set to 64 bytes
- [ 0.185724] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
- [ 0.185728] e820: reserve RAM buffer [mem 0x77f50000-0x77ffffff]
- [ 0.186214] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.186214] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
- [ 0.186214] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
- [ 0.188055] Switched to clocksource hpet
- [ 0.201289] pnp: PnP ACPI init
- [ 0.201579] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
- [ 0.201585] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.201589] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.201593] system 00:00: [mem 0xfec80000-0xfec80fff] has been reserved
- [ 0.201598] system 00:00: [mem 0xfef00000-0xfef00fff] has been reserved
- [ 0.201604] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.201798] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.201803] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.203951] system 00:02: [io 0x0360-0x0361] has been reserved
- [ 0.203957] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.203963] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.204063] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.204139] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.204222] pnp 00:05: Plug and Play ACPI device, IDs AUI1500 SYN0300 SYN0002 PNP0f13 (active)
- [ 0.204517] system 00:06: [io 0x1000-0x107f] could not be reserved
- [ 0.204522] system 00:06: [io 0x1080-0x10ff] has been reserved
- [ 0.204526] system 00:06: [io 0x1400-0x147f] has been reserved
- [ 0.204530] system 00:06: [io 0x1480-0x14ff] has been reserved
- [ 0.204534] system 00:06: [io 0x1800-0x187f] has been reserved
- [ 0.204538] system 00:06: [io 0x1880-0x18ff] has been reserved
- [ 0.204544] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.204841] pnp: PnP ACPI: found 7 devices
- [ 0.214446] pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
- [ 0.214454] pci 0000:01:09.0: BAR 0: assigned [mem 0xfc100000-0xfc1007ff]
- [ 0.214461] pci 0000:00:08.0: PCI bridge to [bus 01-02]
- [ 0.214467] pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff]
- [ 0.214474] pci 0000:00:0c.0: PCI bridge to [bus 06-07]
- [ 0.214478] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
- [ 0.214482] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
- [ 0.214489] pci 0000:00:0d.0: PCI bridge to [bus 04-05]
- [ 0.214493] pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff]
- [ 0.214501] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.214504] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.214508] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.214512] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
- [ 0.214515] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
- [ 0.214519] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
- [ 0.214523] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
- [ 0.214526] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
- [ 0.214530] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
- [ 0.214534] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
- [ 0.214538] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
- [ 0.214542] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
- [ 0.214545] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
- [ 0.214549] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
- [ 0.214553] pci_bus 0000:00: resource 18 [mem 0x80000000-0xfebfffff]
- [ 0.214557] pci_bus 0000:01: resource 1 [mem 0xfc100000-0xfc1fffff]
- [ 0.214561] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
- [ 0.214564] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
- [ 0.214568] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.214572] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
- [ 0.214575] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
- [ 0.214579] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
- [ 0.214583] pci_bus 0000:01: resource 10 [mem 0x000d4000-0x000d7fff]
- [ 0.214587] pci_bus 0000:01: resource 11 [mem 0x000d8000-0x000dbfff]
- [ 0.214590] pci_bus 0000:01: resource 12 [mem 0x000dc000-0x000dffff]
- [ 0.214594] pci_bus 0000:01: resource 13 [mem 0x000e0000-0x000e3fff]
- [ 0.214598] pci_bus 0000:01: resource 14 [mem 0x000e4000-0x000e7fff]
- [ 0.214602] pci_bus 0000:01: resource 15 [mem 0x000e8000-0x000ebfff]
- [ 0.214605] pci_bus 0000:01: resource 16 [mem 0x000ec000-0x000effff]
- [ 0.214609] pci_bus 0000:01: resource 17 [mem 0x000f0000-0x000fffff]
- [ 0.214613] pci_bus 0000:01: resource 18 [mem 0x80000000-0xfebfffff]
- [ 0.214617] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
- [ 0.214621] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xfbffffff]
- [ 0.214625] pci_bus 0000:04: resource 1 [mem 0xfc000000-0xfc0fffff]
- [ 0.214664] NET: Registered protocol family 2
- [ 0.214921] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.215021] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
- [ 0.215297] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.215385] TCP: reno registered
- [ 0.215393] UDP hash table entries: 1024 (order: 4, 98304 bytes)
- [ 0.215456] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
- [ 0.215615] NET: Registered protocol family 1
- [ 0.215955] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
- [ 0.266287] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
- [ 0.266540] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 16
- [ 0.317266] ACPI: PCI Interrupt Link [Z013] enabled at IRQ 16
- [ 0.317379] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.317435] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.317496] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.317563] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.317635] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.317711] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.317721] pci 0000:00:12.0: Video device with shadowed ROM
- [ 0.317746] PCI: CLS 64 bytes, default 64
- [ 0.317980] Simple Boot Flag at 0x36 set to 0x1
- [ 0.318200] microcode: AMD CPU family 0xf not supported
- [ 0.318513] Scanning for low memory corruption every 60 seconds
- [ 0.319054] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.325547] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.326723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.326730] io scheduler noop registered
- [ 0.326735] io scheduler deadline registered
- [ 0.326883] io scheduler cfq registered (default)
- [ 0.327244] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.327284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.327456] vga16fb: initializing
- [ 0.327460] vga16fb: mapped to 0xffff8800000a0000
- [ 0.565658] Console: switching to colour frame buffer device 80x30
- [ 0.571245] fb0: VGA16 VGA frame buffer device
- [ 0.573366] ACPI: AC Adapter [ADP1] (on-line)
- [ 0.573559] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- [ 0.575998] ACPI: Lid Switch [LID0]
- [ 0.576160] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- [ 0.576166] ACPI: Sleep Button [SLPB]
- [ 0.576282] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 0.576286] ACPI: Power Button [PWRB]
- [ 0.576438] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.576441] ACPI: Power Button [PWRF]
- [ 0.576628] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 0.592995] acpi device:1b: registered as cooling_device0
- [ 0.593144] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
- [ 0.593193] ACPI: processor limited to max C-state 1
- [ 0.615469] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.615472] ACPI: Thermal Zone [TZS0] (45 C)
- [ 0.625403] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.625406] ACPI: Thermal Zone [TZS1] (48 C)
- [ 0.625848] Non-volatile memory driver v1.3
- [ 0.625998] Linux agpgart interface v0.103
- [ 0.626115] [drm] Initialized drm 1.1.0 20060810
- [ 0.626120] drm/i810 does not support SMP
- [ 0.627810] ACPI: Battery Slot [BAT0] (battery absent)
- [ 0.628186] loop: module loaded
- [ 0.628294] ahci 0000:00:09.0: version 3.0
- [ 0.628546] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
- [ 0.628591] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
- [ 0.628594] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
- [ 0.628653] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
- [ 0.628658] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
- [ 0.630092] scsi host0: ahci
- [ 0.630451] scsi host1: ahci
- [ 0.630697] scsi host2: ahci
- [ 0.630934] scsi host3: ahci
- [ 0.631071] ata1: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484100 irq 23
- [ 0.631075] ata2: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484180 irq 23
- [ 0.631078] ata3: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484200 irq 23
- [ 0.631081] ata4: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484280 irq 23
- [ 0.631299] hso: /mnt/host/source/src/third_party/kernel/linux-atb/drivers/net/usb/hso.c: Option Wireless
- [ 0.631357] usbcore: registered new interface driver hso
- [ 0.631518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.631522] ehci-pci: EHCI PCI platform driver
- [ 0.631642] ehci-pci 0000:00:02.1: EHCI Host Controller
- [ 0.631747] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 0.631772] ehci-pci 0000:00:02.1: debug port 1
- [ 0.631801] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
- [ 0.631837] ehci-pci 0000:00:02.1: irq 17, io mem 0xfc489000
- [ 0.637029] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 0.637095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.637099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.637102] usb usb1: Product: EHCI Host Controller
- [ 0.637106] usb usb1: Manufacturer: Linux 3.19.3-g326cdcc-dirty ehci_hcd
- [ 0.637109] usb usb1: SerialNumber: 0000:00:02.1
- [ 0.637376] hub 1-0:1.0: USB hub found
- [ 0.637388] hub 1-0:1.0: 5 ports detected
- [ 0.637761] ehci-pci 0000:00:04.1: EHCI Host Controller
- [ 0.637852] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
- [ 0.637862] ehci-pci 0000:00:04.1: debug port 1
- [ 0.637888] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
- [ 0.637917] ehci-pci 0000:00:04.1: irq 16, io mem 0xfc489400
- [ 0.643033] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
- [ 0.643085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.643089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.643092] usb usb2: Product: EHCI Host Controller
- [ 0.643096] usb usb2: Manufacturer: Linux 3.19.3-g326cdcc-dirty ehci_hcd
- [ 0.643099] usb usb2: SerialNumber: 0000:00:04.1
- [ 0.643340] hub 2-0:1.0: USB hub found
- [ 0.643350] hub 2-0:1.0: 5 ports detected
- [ 0.643633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.643642] ohci-pci: OHCI PCI platform driver
- [ 0.643711] ohci-pci 0000:00:02.0: OHCI PCI host controller
- [ 0.643798] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 0.643828] ohci-pci 0000:00:02.0: irq 17, io mem 0xfc486000
- [ 0.696081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.696084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.696088] usb usb3: Product: OHCI PCI host controller
- [ 0.696092] usb usb3: Manufacturer: Linux 3.19.3-g326cdcc-dirty ohci_hcd
- [ 0.696095] usb usb3: SerialNumber: 0000:00:02.0
- [ 0.696324] hub 3-0:1.0: USB hub found
- [ 0.696336] hub 3-0:1.0: 5 ports detected
- [ 0.696638] ohci-pci 0000:00:04.0: OHCI PCI host controller
- [ 0.696730] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
- [ 0.696752] ohci-pci 0000:00:04.0: irq 16, io mem 0xfc487000
- [ 0.749079] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.749083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.749086] usb usb4: Product: OHCI PCI host controller
- [ 0.749089] usb usb4: Manufacturer: Linux 3.19.3-g326cdcc-dirty ohci_hcd
- [ 0.749092] usb usb4: SerialNumber: 0000:00:04.0
- [ 0.749326] hub 4-0:1.0: USB hub found
- [ 0.749338] hub 4-0:1.0: 5 ports detected
- [ 0.749609] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.749696] usbcore: registered new interface driver cdc_acm
- [ 0.749698] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.749749] usbcore: registered new interface driver usb-storage
- [ 0.749778] usbcore: registered new interface driver ums-realtek
- [ 0.749863] usbcore: registered new interface driver usbserial
- [ 0.749882] usbcore: registered new interface driver usbserial_generic
- [ 0.749900] usbserial: USB Serial support registered for generic
- [ 0.749974] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.764324] i8042: Detected active multiplexing controller, rev 1.1
- [ 0.772130] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.772138] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.772202] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.772257] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.772313] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.772547] mousedev: PS/2 mouse device common for all mice
- [ 0.773460] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
- [ 0.773556] Driver 'mmcblk' needs updating - please use bus_type methods
- [ 0.773578] sdhci: Secure Digital Host Controller Interface driver
- [ 0.773579] sdhci: Copyright(c) Pierre Ossman
- [ 0.773620] sdhci-pci 0000:01:09.1: SDHCI controller found [1180:0822] (rev 22)
- [ 0.773857] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
- [ 0.773893] sdhci-pci 0000:01:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.773902] sdhci-pci 0000:01:09.1: No vmmc regulator found
- [ 0.773905] sdhci-pci 0000:01:09.1: No vqmmc regulator found
- [ 0.773910] sdhci-pci 0000:01:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.774110] sdhci-pci 0000:01:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.776040] mmc0: SDHCI controller on PCI [0000:01:09.1] using DMA
- [ 0.776082] sdhci-pci 0000:01:09.2: SDHCI controller found [1180:0843] (rev 12)
- [ 0.776172] sdhci-pci 0000:01:09.2: No vmmc regulator found
- [ 0.776175] sdhci-pci 0000:01:09.2: No vqmmc regulator found
- [ 0.778031] mmc1: SDHCI controller on PCI [0000:01:09.2] using DMA
- [ 0.778153] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.778306] usbcore: registered new interface driver usbhid
- [ 0.778308] usbhid: USB HID core driver
- [ 0.778396] ashmem: initialized
- [ 0.778641] Netfilter messages via NETLINK v0.30.
- [ 0.778683] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.778902] ctnetlink v0.93: registering with nfnetlink.
- [ 0.779070] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.779104] TCP: cubic registered
- [ 0.779109] Initializing XFRM netlink socket
- [ 0.779482] NET: Registered protocol family 10
- [ 0.779810] NET: Registered protocol family 17
- [ 0.781107] Magic number: 11:565:1007
- [ 0.781144] input input4: hash matches
- [ 0.781506] ALSA device list:
- [ 0.781508] No soundcards found.
- [ 0.798604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- [ 0.936036] ata3: SATA link down (SStatus 0 SControl 300)
- [ 0.936055] ata2: SATA link down (SStatus 0 SControl 300)
- [ 0.936072] ata4: SATA link down (SStatus 0 SControl 300)
- [ 0.936085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.936455] ata1.00: ATA-8: FUJITSU MHY2250BH, 890B, max UDMA/100
- [ 0.936459] ata1.00: 488397168 sectors, multi 16: LBA48
- [ 0.936928] ata1.00: configured for UDMA/100
- [ 0.937072] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2250B 890B PQ: 0 ANSI: 5
- [ 0.937443] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 0.937503] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.937508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.937537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.955641] sda: sda1 sda2
- [ 0.956270] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.191038] usb 1-5: new high-speed USB device number 3 using ehci-pci
- [ 1.210035] usb 3-1: new full-speed USB device number 2 using ohci-pci
- [ 1.309616] usb 1-5: New USB device found, idVendor=04fc, idProduct=0c25
- [ 1.309620] usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 1.309623] usb 1-5: Product: USB to Serial-ATA bridge
- [ 1.309626] usb 1-5: Manufacturer: Sunplus Technology Co.,Ltd.
- [ 1.309630] usb 1-5: SerialNumber: FFFACFF0FF100927FBFB08EC0FAFFF
- [ 1.311277] usb-storage 1-5:1.0: USB Mass Storage device detected
- [ 1.311451] scsi host4: usb-storage 1-5:1.0
- [ 1.411123] usb 3-1: New USB device found, idVendor=045e, idProduct=0745
- [ 1.411127] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.411130] usb 3-1: Product: Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0
- [ 1.411133] usb 3-1: Manufacturer: Microsoft
- [ 1.421219] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/0003:045E:0745.0001/input/input12
- [ 1.472192] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0] on usb-0000:00:02.0-1/input0
- [ 1.482315] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/0003:045E:0745.0002/input/input13
- [ 1.533274] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0] on usb-0000:00:02.0-1/input1
- [ 1.560891] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.2/0003:045E:0745.0003/input/input14
- [ 1.611274] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v4.0] on usb-0000:00:02.0-1/input2
- [ 2.305203] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input15
- [ 2.316391] scsi 4:0:0:0: Direct-Access Hitachi HTS545016B9SA00 PQ: 0 ANSI: 2
- [ 2.317508] sd 4:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 2.321023] sd 4:0:0:0: [sdb] Write Protect is off
- [ 2.321027] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00
- [ 2.325015] sd 4:0:0:0: [sdb] No Caching mode page found
- [ 2.325173] sd 4:0:0:0: [sdb] Assuming drive cache: write through
- [ 2.326841] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11
- [ 3.274403] GPT:Primary header thinks Alt. header is not at the end of the disk.
- [ 3.274407] GPT:14995391 != 312581807
- [ 3.274408] GPT:Alternate GPT header not at the end of the disk.
- [ 3.274410] GPT:14995391 != 312581807
- [ 3.274412] GPT: Use GNU Parted to correct GPT errors.
- [ 3.274441] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12
- [ 3.285016] sd 4:0:0:0: [sdb] Attached SCSI disk
- [ 3.297632] EXT4-fs (sdb3): couldn't mount as ext3 due to feature incompatibilities
- [ 3.298376] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
- [ 3.316810] EXT4-fs (sdb3): mounted filesystem without journal. Opts: (null)
- [ 3.316824] VFS: Mounted root (ext2 filesystem) readonly on device 8:19.
- [ 3.336391] devtmpfs: mounted
- [ 3.337507] Freeing unused kernel memory: 1148K (ffffffff81ae6000 - ffffffff81c05000)
- [ 3.337512] Write protecting the kernel read-only data: 10240k
- [ 3.338202] Freeing unused kernel memory: 420K (ffff880001597000 - ffff880001600000)
- [ 3.339789] Freeing unused kernel memory: 1700K (ffff880001857000 - ffff880001a00000)
- [ 3.651880] random: nonblocking pool is initialized
- [ 6.342795] tun: Universal TUN/TAP device driver, 1.6
- [ 6.342799] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 6.376624] PPP generic driver version 2.4.2
- [ 6.577741] systemd-udevd[113]: starting version 208
- [ 6.828646] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 6.829131] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
- [ 7.396427] wmi: Mapper loaded
- [ 7.446762] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.541255] input: HP WMI hotkeys as /devices/virtual/input/input18
- [ 7.627995] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
- [ 7.628038] snd_hda_intel 0000:00:07.0: Disabling MSI
- [ 7.817312] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: commit=600
- [ 7.928376] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.103568] sound hdaudioC0D0: CX20549 (Venice): BIOS auto-probing.
- [ 8.121037] sound hdaudioC0D0: autoconfig: line_outs=1 (0x10/0x0/0x0/0x0/0x0) type:speaker
- [ 8.121041] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 8.121045] sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
- [ 8.121049] sound hdaudioC0D0: mono: mono_out=0x0
- [ 8.121052] sound hdaudioC0D0: dig-out=0x13/0x0
- [ 8.121054] sound hdaudioC0D0: inputs:
- [ 8.121058] sound hdaudioC0D0: Mic=0x14
- [ 8.144691] checking generic (a0000 10000) vs hw (d0000000 10000000)
- [ 8.144696] checking generic (a0000 10000) vs hw (f0000000 1000000)
- [ 8.144699] fb: switching to nouveaufb from VGA16 VGA
- [ 8.162051] Console: switching to colour VGA+ 80x25
- [ 8.166439] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 21
- [ 8.166946] nouveau [ DEVICE][0000:00:12.0] BOOT0 : 0x067000a1
- [ 8.166951] nouveau [ DEVICE][0000:00:12.0] Chipset: C67 (NV67)
- [ 8.166954] nouveau [ DEVICE][0000:00:12.0] Family : NV40
- [ 8.177568] nouveau [ VBIOS][0000:00:12.0] using image from PRAMIN
- [ 8.177797] nouveau [ VBIOS][0000:00:12.0] BIT signature found
- [ 8.177802] nouveau [ VBIOS][0000:00:12.0] version 05.67.32.16.06
- [ 8.178174] nouveau [ PFB][0000:00:12.0] RAM type: unknown
- [ 8.178178] nouveau [ PFB][0000:00:12.0] RAM size: 128 MiB
- [ 8.178181] nouveau [ PFB][0000:00:12.0] ZCOMP: 0 tags
- [ 8.182283] nouveau [ VOLT][0000:00:12.0] GPU voltage: 1200000uv
- [ 8.211324] nouveau [ PTHERM][0000:00:12.0] FAN control: none / external
- [ 8.211340] nouveau [ PTHERM][0000:00:12.0] fan management: automatic
- [ 8.211345] nouveau [ PTHERM][0000:00:12.0] internal sensor: yes
- [ 8.231376] sound hdaudioC0D0: Enable sync_write for stable communication
- [ 8.231391] nouveau [ CLK][0000:00:12.0] 20: core 100 MHz shader 100 MHz
- [ 8.231400] nouveau [ CLK][0000:00:12.0] 21: core 250 MHz shader 250 MHz
- [ 8.231406] nouveau [ CLK][0000:00:12.0] 22: core 425 MHz shader 425 MHz
- [ 8.231421] nouveau [ CLK][0000:00:12.0] --: core 39 MHz
- [ 8.231643] [TTM] Zone kernel: Available graphics memory: 960418 kiB
- [ 8.231646] [TTM] Initializing pool allocator
- [ 8.231658] [TTM] Initializing DMA pool allocator
- [ 8.231685] nouveau [ DRM] VRAM: 125 MiB
- [ 8.231688] nouveau [ DRM] GART: 512 MiB
- [ 8.231693] nouveau [ DRM] TMDS table version 1.1
- [ 8.231696] nouveau W[ DRM] TMDS table script pointers not stubbed
- [ 8.231699] nouveau [ DRM] DCB version 3.0
- [ 8.231735] nouveau [ DRM] DCB outp 00: 03015323 00000004
- [ 8.231739] nouveau [ DRM] DCB outp 01: 01400310 00000023
- [ 8.231742] nouveau [ DRM] DCB outp 02: 024223f1 0040c080
- [ 8.231745] nouveau [ DRM] DCB conn 00: 0000
- [ 8.231748] nouveau [ DRM] DCB conn 01: 1161
- [ 8.231751] nouveau [ DRM] DCB conn 02: 0210
- [ 8.231754] nouveau [ DRM] DCB conn 03: 0211
- [ 8.231757] nouveau [ DRM] DCB conn 04: 0213
- [ 8.231760] nouveau [ DRM] DCB conn 05: 0340
- [ 8.232146] nouveau [ DRM] Saving VGA fonts
- [ 8.273845] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 8.273850] [drm] Driver supports precise vblank timestamp query.
- [ 8.275767] nouveau [ DRM] MM: using M2MF for buffer copies
- [ 8.275778] nouveau [ DRM] Calling LVDS script 6:
- [ 8.275781] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 8.275790] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 8.308466] cfg80211: World regulatory domain updated:
- [ 8.308471] cfg80211: DFS Master region: unset
- [ 8.308474] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 8.308477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 8.308480] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 8.308483] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 8.308486] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 8.308489] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
- [ 8.308493] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 8.308496] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 8.308499] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 8.332042] nouveau [ DRM] Load detected on output B
- [ 8.332204] nouveau [ DRM] allocated 1280x800 fb: 0x9000, bo ffff880071c6c800
- [ 8.332408] fbcon: nouveaufb (fb0) is primary device
- [ 8.356056] input: HDA NVidia Headphone Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input19
- [ 8.358581] nouveau [ DRM] Calling LVDS script 2:
- [ 8.358584] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 8.490612] nouveau [ DRM] Calling LVDS script 5:
- [ 8.490614] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 8.511077] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 8.511086] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 8.511932] Console: switching to colour frame buffer device 90x36
- [ 8.512756] nouveau 0000:00:12.0: fb0: nouveaufb frame buffer device
- [ 8.512759] nouveau 0000:00:12.0: registered panic notifier
- [ 8.517038] [drm] Initialized nouveau 1.2.1 20120801 for 0000:00:12.0 on minor 0
- [ 8.957088] wl: module license 'Mixed/Proprietary' taints kernel.
- [ 8.957095] Disabling lock debugging due to kernel taint
- [ 8.992480] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 20
- [ 9.027684] malloc in abgphy done
- [ 9.028600] wl0: online cpus 1
- [ 9.044156] wl_init_rfkill: rfkill registered
- [ 9.044242] wlan0: Broadcom BCM4311 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
- [ 9.770270] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard,commit=600
- [ 10.870628] EXT4-fs (sdb1): re-mounted. Opts: commit=600,data=ordered
- [ 11.156132] init: ureadahead main process (2344) terminated with status 5
- [ 12.055362] flashrom:2466 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 12.649383] flashrom:2495 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 12.651782] init: vpd-log main process (2350) terminated with status 1
- [ 13.028079] init: lockbox-cache pre-start process (2555) terminated with status 1
- [ 14.091230] init: tcsd main process (2710) terminated with status 137
- [ 14.091273] init: tcsd main process ended, respawning
- [ 14.317916] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 14.352040] nouveau [ DRM] Load detected on output B
- [ 15.786977] flashrom:2893 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 16.385656] flashrom:2944 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 16.699034] nouveau [ DRM] Load detected on output B
- [ 16.756048] nouveau [ DRM] Load detected on output B
- [ 16.756453] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 17.051443] flashrom:3066 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 17.646656] flashrom:3082 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 18.311397] flashrom:3173 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 18.824253] init: disable_echo main process (75) killed by TERM signal
- [ 20.782875] flashrom:3209 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 22.789003] flashrom:4367 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 24.755979] flashrom:5131 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00003fff], got write-back
- [ 27.374037] nouveau [ DRM] Load detected on output B
- [ 27.565271] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 27.565287] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 31.178037] nouveau [ DRM] Load detected on output B
- [ 31.875035] nouveau [ DRM] Load detected on output B
- [ 32.494037] nouveau [ DRM] Load detected on output B
- [ 32.937590] init: ui main process (2648) terminated with status 2
- [ 32.953605] init: debugd main process (2670) killed by TERM signal
- [ 33.651443] nouveau [ DRM] Calling LVDS script 6:
- [ 33.651451] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 33.651464] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 33.672301] nouveau [ DRM] Calling LVDS script 2:
- [ 33.672303] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 33.804331] nouveau [ DRM] Calling LVDS script 5:
- [ 33.804333] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 33.824701] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 33.824712] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 33.902039] init: lockbox-cache pre-start process (8432) terminated with status 1
- [ 34.002039] nouveau [ DRM] Load detected on output B
- [ 34.059034] nouveau [ DRM] Load detected on output B
- [ 34.059355] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 34.427044] nouveau [ DRM] Load detected on output B
- [ 34.563355] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 34.563370] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 35.104063] nouveau [ DRM] Load detected on output B
- [ 35.849038] nouveau [ DRM] Load detected on output B
- [ 36.439307] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
- [ 36.439314] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
- [ 36.445497] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
- [ 36.445501] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
- [ 36.460036] nouveau [ DRM] Load detected on output B
- [ 36.830438] init: ui main process (8446) terminated with status 2
- [ 36.840310] init: debugd main process (8469) killed by TERM signal
- [ 37.056438] nouveau [ DRM] Calling LVDS script 6:
- [ 37.056445] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 37.056458] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 37.077279] nouveau [ DRM] Calling LVDS script 2:
- [ 37.077282] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 37.209309] nouveau [ DRM] Calling LVDS script 5:
- [ 37.209311] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 37.229625] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 37.229634] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 37.286595] init: lockbox-cache pre-start process (9331) terminated with status 1
- [ 37.387036] nouveau [ DRM] Load detected on output B
- [ 37.444036] nouveau [ DRM] Load detected on output B
- [ 37.444360] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 37.693021] CE: hpet increased min_delta_ns to 11521 nsec
- [ 37.818045] nouveau [ DRM] Load detected on output B
- [ 37.953995] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 37.954032] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 38.506055] nouveau [ DRM] Load detected on output B
- [ 39.216037] nouveau [ DRM] Load detected on output B
- [ 39.901036] nouveau [ DRM] Load detected on output B
- [ 40.331347] init: ui main process (9345) terminated with status 2
- [ 40.345957] init: debugd main process (9368) killed by TERM signal
- [ 40.557442] nouveau [ DRM] Calling LVDS script 6:
- [ 40.557449] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 40.557462] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 40.578296] nouveau [ DRM] Calling LVDS script 2:
- [ 40.578299] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 40.710316] nouveau [ DRM] Calling LVDS script 5:
- [ 40.710318] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 40.730647] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 40.730656] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 40.788490] init: lockbox-cache pre-start process (10352) terminated with status 1
- [ 40.888038] nouveau [ DRM] Load detected on output B
- [ 40.945035] nouveau [ DRM] Load detected on output B
- [ 40.945357] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 41.319038] nouveau [ DRM] Load detected on output B
- [ 41.454781] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 41.454807] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 42.013054] nouveau [ DRM] Load detected on output B
- [ 42.712047] nouveau [ DRM] Load detected on output B
- [ 42.866329] rtc_cmos 00:03: RTC can wake from S4
- [ 42.866619] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 42.866672] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
- [ 44.240070] nouveau [ DRM] Load detected on output B
- [ 44.727724] init: ui main process (10366) terminated with status 2
- [ 44.738699] init: debugd main process (10389) killed by TERM signal
- [ 44.974559] nouveau [ DRM] Calling LVDS script 6:
- [ 44.974567] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 44.974580] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 44.995447] nouveau [ DRM] Calling LVDS script 2:
- [ 44.995449] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 45.127467] nouveau [ DRM] Calling LVDS script 5:
- [ 45.127469] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 45.147785] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 45.147794] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 45.255745] init: lockbox-cache pre-start process (12982) terminated with status 1
- [ 45.372068] nouveau [ DRM] Load detected on output B
- [ 45.429060] nouveau [ DRM] Load detected on output B
- [ 45.429485] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 45.820057] nouveau [ DRM] Load detected on output B
- [ 45.956928] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 45.956944] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 46.546047] nouveau [ DRM] Load detected on output B
- [ 47.343049] nouveau [ DRM] Load detected on output B
- [ 48.072084] nouveau [ DRM] Load detected on output B
- [ 48.534772] init: ui main process (13016) terminated with status 2
- [ 48.552831] init: debugd main process (13116) killed by TERM signal
- [ 48.812549] nouveau [ DRM] Calling LVDS script 6:
- [ 48.812557] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 48.812571] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 48.833448] nouveau [ DRM] Calling LVDS script 2:
- [ 48.833450] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 48.965467] nouveau [ DRM] Calling LVDS script 5:
- [ 48.965469] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 48.985794] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 48.985803] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 49.046361] init: lockbox-cache pre-start process (16373) terminated with status 1
- [ 49.154068] nouveau [ DRM] Load detected on output B
- [ 49.211053] nouveau [ DRM] Load detected on output B
- [ 49.211483] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 49.611052] nouveau [ DRM] Load detected on output B
- [ 49.747267] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 49.747284] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 50.575056] nouveau [ DRM] Load detected on output B
- [ 51.464069] nouveau [ DRM] Load detected on output B
- [ 52.241039] nouveau [ DRM] Load detected on output B
- [ 52.654435] init: ui main process (16408) terminated with status 2
- [ 52.667633] init: debugd main process (16503) killed by TERM signal
- [ 52.904436] nouveau [ DRM] Calling LVDS script 6:
- [ 52.904444] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 52.904457] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 52.925311] nouveau [ DRM] Calling LVDS script 2:
- [ 52.925314] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 53.057342] nouveau [ DRM] Calling LVDS script 5:
- [ 53.057344] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 53.077656] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 53.077666] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 53.230928] init: lockbox-cache pre-start process (19483) terminated with status 1
- [ 53.331037] nouveau [ DRM] Load detected on output B
- [ 53.388036] nouveau [ DRM] Load detected on output B
- [ 53.388370] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 53.752046] nouveau [ DRM] Load detected on output B
- [ 53.889039] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 53.889054] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 54.461038] nouveau [ DRM] Load detected on output B
- [ 55.171037] nouveau [ DRM] Load detected on output B
- [ 55.836037] nouveau [ DRM] Load detected on output B
- [ 56.235123] init: ui main process (19497) terminated with status 2
- [ 56.250629] init: debugd main process (19520) killed by TERM signal
- [ 56.479443] nouveau [ DRM] Calling LVDS script 6:
- [ 56.479451] nouveau [ DRM] 0xD680: Parsing digital output script table
- [ 56.479464] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2)
- [ 56.500298] nouveau [ DRM] Calling LVDS script 2:
- [ 56.500300] nouveau [ DRM] 0xD6D8: Parsing digital output script table
- [ 56.632318] nouveau [ DRM] Calling LVDS script 5:
- [ 56.632320] nouveau [ DRM] 0xD676: Parsing digital output script table
- [ 56.652631] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2)
- [ 56.652639] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B
- [ 630.755039] usb 1-2: new high-speed USB device number 4 using ehci-pci
- [ 630.870989] usb 1-2: New USB device found, idVendor=125f, idProduct=312b
- [ 630.870994] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 630.870998] usb 1-2: Product: ADATA USB Flash Drive
- [ 630.871001] usb 1-2: Manufacturer: ADATA
- [ 630.871015] usb 1-2: SerialNumber: 22B1408151270734
- [ 630.871926] usb-storage 1-2:1.0: USB Mass Storage device detected
- [ 630.872057] scsi host5: usb-storage 1-2:1.0
- [ 631.876144] scsi 5:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
- [ 631.878142] sd 5:0:0:0: [sdc] 61739008 512-byte logical blocks: (31.6 GB/29.4 GiB)
- [ 631.878497] sd 5:0:0:0: [sdc] Write Protect is off
- [ 631.878502] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
- [ 631.878870] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
- [ 631.882647] sdc: sdc1
- [ 631.886381] sd 5:0:0:0: [sdc] Attached SCSI removable disk
- [ 741.412040] usb 1-2: USB disconnect, device number 4
- [ 750.266041] usb 1-2: new high-speed USB device number 5 using ehci-pci
- [ 750.381989] usb 1-2: New USB device found, idVendor=125f, idProduct=312b
- [ 750.381994] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 750.381998] usb 1-2: Product: ADATA USB Flash Drive
- [ 750.382012] usb 1-2: Manufacturer: ADATA
- [ 750.382015] usb 1-2: SerialNumber: 22B1408151270734
- [ 750.382716] usb-storage 1-2:1.0: USB Mass Storage device detected
- [ 750.382912] scsi host6: usb-storage 1-2:1.0
- [ 751.386145] scsi 6:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
- [ 751.388143] sd 6:0:0:0: [sdc] 61739008 512-byte logical blocks: (31.6 GB/29.4 GiB)
- [ 751.388498] sd 6:0:0:0: [sdc] Write Protect is off
- [ 751.388503] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
- [ 751.388868] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
- [ 751.392522] sdc: sdc1
- [ 751.396258] sd 6:0:0:0: [sdc] Attached SCSI removable disk
- [ 771.371658] fuse init (API version 7.23)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement