API tools faq
paste
Guest User

output from dmesg command

a guest
Nov 4th, 2025
27
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 58.17 KB | Software | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
  2. [ 0.000000] Linux version 6.12.47+rpt-rpi-2712 ([email protected]) (aarch64-linux-gnu-gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.12.47-1+rpt1~bookworm (2025-09-16)
  3. [ 0.000000] KASLR enabled
  4. [ 0.000000] random: crng init done
  5. [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.1
  6. [ 0.000000] efi: UEFI not found.
  7. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB
  8. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  9. [ 0.000000] OF: reserved mem: 0x000000003a000000..0x000000003dffffff (65536 KiB) map reusable linux,cma
  10. [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
  11. [ 0.000000] OF: reserved mem: 0x000000003fd237e0..0x000000003fd2381d (0 KiB) nomap non-reusable nvram@0
  12. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000003ffffffff]
  13. [ 0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000007fffffff] (2048MB)
  14. [ 0.000000] Faking node 1 at [mem 0x0000000080000000-0x00000000ffffffff] (2048MB)
  15. [ 0.000000] Faking node 2 at [mem 0x0000000100000000-0x000000017fffffff] (2048MB)
  16. [ 0.000000] Faking node 3 at [mem 0x0000000180000000-0x00000001ffffffff] (2048MB)
  17. [ 0.000000] Faking node 4 at [mem 0x0000000200000000-0x000000027fffffff] (2048MB)
  18. [ 0.000000] Faking node 5 at [mem 0x0000000280000000-0x00000002ffffffff] (2048MB)
  19. [ 0.000000] Faking node 6 at [mem 0x0000000300000000-0x000000037fffffff] (2048MB)
  20. [ 0.000000] Faking node 7 at [mem 0x0000000380000000-0x00000003ffffffff] (2048MB)
  21. [ 0.000000] NUMA: Initialized distance table, cnt=8
  22. [ 0.000000] NODE_DATA(0) allocated [mem 0x7fffd200-0x7fffffff]
  23. [ 0.000000] NODE_DATA(1) allocated [mem 0xffffd200-0xffffffff]
  24. [ 0.000000] NODE_DATA(2) allocated [mem 0x17fffd200-0x17fffffff]
  25. [ 0.000000] NODE_DATA(3) allocated [mem 0x1ffffd200-0x1ffffffff]
  26. [ 0.000000] NODE_DATA(4) allocated [mem 0x27fffd200-0x27fffffff]
  27. [ 0.000000] NODE_DATA(5) allocated [mem 0x2ffffd200-0x2ffffffff]
  28. [ 0.000000] NODE_DATA(6) allocated [mem 0x37fffd200-0x37fffffff]
  29. [ 0.000000] NODE_DATA(7) allocated [mem 0x3ff799200-0x3ff79bfff]
  30. [ 0.000000] Zone ranges:
  31. [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
  32. [ 0.000000] DMA32 empty
  33. [ 0.000000] Normal [mem 0x0000000100000000-0x00000003ffffffff]
  34. [ 0.000000] Movable zone start for each node
  35. [ 0.000000] Early memory node ranges
  36. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
  37. [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff]
  38. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  39. [ 0.000000] node 1: [mem 0x0000000080000000-0x00000000ffffffff]
  40. [ 0.000000] node 2: [mem 0x0000000100000000-0x000000017fffffff]
  41. [ 0.000000] node 3: [mem 0x0000000180000000-0x00000001ffffffff]
  42. [ 0.000000] node 4: [mem 0x0000000200000000-0x000000027fffffff]
  43. [ 0.000000] node 5: [mem 0x0000000280000000-0x00000002ffffffff]
  44. [ 0.000000] node 6: [mem 0x0000000300000000-0x000000037fffffff]
  45. [ 0.000000] node 7: [mem 0x0000000380000000-0x00000003ffffffff]
  46. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
  47. [ 0.000000] Initmem setup node 1 [mem 0x0000000080000000-0x00000000ffffffff]
  48. [ 0.000000] Initmem setup node 2 [mem 0x0000000100000000-0x000000017fffffff]
  49. [ 0.000000] Initmem setup node 3 [mem 0x0000000180000000-0x00000001ffffffff]
  50. [ 0.000000] Initmem setup node 4 [mem 0x0000000200000000-0x000000027fffffff]
  51. [ 0.000000] Initmem setup node 5 [mem 0x0000000280000000-0x00000002ffffffff]
  52. [ 0.000000] Initmem setup node 6 [mem 0x0000000300000000-0x000000037fffffff]
  53. [ 0.000000] Initmem setup node 7 [mem 0x0000000380000000-0x00000003ffffffff]
  54. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  55. [ 0.000000] psci: probing for conduit method from DT.
  56. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  57. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  58. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  59. [ 0.000000] psci: SMC Calling Convention v1.2
  60. [ 0.000000] percpu: Embedded 15 pages/cpu s193496 r8192 d44072 u245760
  61. [ 0.000000] pcpu-alloc: s193496 r8192 d44072 u245760 alloc=15*16384
  62. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  63. [ 0.000000] Detected PIPT I-cache on CPU0
  64. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  65. [ 0.000000] CPU features: detected: Spectre-v4
  66. [ 0.000000] CPU features: detected: Spectre-BHB
  67. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  68. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  69. [ 0.000000] CPU features: detected: SSBS not fully self-synchronizing
  70. [ 0.000000] alternatives: applying boot alternatives
  71. [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=88:A2:9E:04:02:30 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=28225e8e-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US
  72. [ 0.000000] cgroup: Disabling memory control group subsystem
  73. [ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7'
  74. [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
  75. [ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7
  76. [ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0
  77. [ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1
  78. [ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2
  79. [ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3
  80. [ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4
  81. [ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5
  82. [ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6
  83. [ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 1048064
  84. [ 0.000000] Policy zone: Normal
  85. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  86. [ 0.000000] software IO TLB: area num 4.
  87. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
  88. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8
  89. [ 0.000000] ftrace: allocating 45292 entries in 45 pages
  90. [ 0.000000] ftrace: allocated 45 pages with 4 groups
  91. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  92. [ 0.000000] rcu: RCU event tracing is enabled.
  93. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  94. [ 0.000000] Rude variant of Tasks RCU enabled.
  95. [ 0.000000] Tracing variant of Tasks RCU enabled.
  96. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  97. [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  98. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  99. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  100. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  101. [ 0.000000] Root IRQ handler: gic_handle_irq
  102. [ 0.000000] GIC: Using split EOI/Deactivate mode
  103. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  104. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  105. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  106. [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  107. [ 0.000090] Console: colour dummy device 80x25
  108. [ 0.000094] printk: legacy console [tty1] enabled
  109. [ 0.000165] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  110. [ 0.000168] pid_max: default: 32768 minimum: 301
  111. [ 0.000262] LSM: initializing lsm=capability
  112. [ 0.003176] Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes, vmalloc)
  113. [ 0.004631] Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc)
  114. [ 0.004698] Mount-cache hash table entries: 32768 (order: 4, 262144 bytes, vmalloc)
  115. [ 0.004736] Mountpoint-cache hash table entries: 32768 (order: 4, 262144 bytes, vmalloc)
  116. [ 0.005459] rcu: Hierarchical SRCU implementation.
  117. [ 0.005466] rcu: Max phase no-delay instances is 1000.
  118. [ 0.005511] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level
  119. [ 0.005855] EFI services will not be available.
  120. [ 0.005920] smp: Bringing up secondary CPUs ...
  121. [ 0.006145] Detected PIPT I-cache on CPU1
  122. [ 0.006182] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
  123. [ 0.006398] Detected PIPT I-cache on CPU2
  124. [ 0.006428] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
  125. [ 0.006612] Detected PIPT I-cache on CPU3
  126. [ 0.006632] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
  127. [ 0.006664] smp: Brought up 8 nodes, 4 CPUs
  128. [ 0.006669] SMP: Total of 4 processors activated.
  129. [ 0.006670] CPU: All CPU(s) started at EL2
  130. [ 0.006672] CPU features: detected: 32-bit EL0 Support
  131. [ 0.006674] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  132. [ 0.006676] CPU features: detected: Common not Private translations
  133. [ 0.006677] CPU features: detected: CRC32 instructions
  134. [ 0.006680] CPU features: detected: RCpc load-acquire (LDAPR)
  135. [ 0.006681] CPU features: detected: LSE atomic instructions
  136. [ 0.006682] CPU features: detected: Privileged Access Never
  137. [ 0.006683] CPU features: detected: RAS Extension Support
  138. [ 0.006685] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  139. [ 0.006709] alternatives: applying system-wide alternatives
  140. [ 0.008196] CPU features: detected: Hardware dirty bit management on CPU0-3
  141. [ 0.008371] Memory: 16466352K/16769024K available (14208K kernel code, 2418K rwdata, 4944K rodata, 5696K init, 647K bss, 183728K reserved, 65536K cma-reserved)
  142. [ 0.008578] devtmpfs: initialized
  143. [ 0.010440] Enabled cp15_barrier support
  144. [ 0.010445] Enabled setend support
  145. [ 0.010484] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  146. [ 0.010490] futex hash table entries: 1024 (order: 2, 65536 bytes, vmalloc)
  147. [ 0.010609] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
  148. [ 0.010611] 0 pages in range for non-PLT usage
  149. [ 0.010612] 129304 pages in range for PLT usage
  150. [ 0.010691] pinctrl core: initialized pinctrl subsystem
  151. [ 0.010836] DMI not present or invalid.
  152. [ 0.013703] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  153. [ 0.014055] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  154. [ 0.014083] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  155. [ 0.014112] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  156. [ 0.014126] audit: initializing netlink subsys (disabled)
  157. [ 0.014185] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1
  158. [ 0.014286] thermal_sys: Registered thermal governor 'step_wise'
  159. [ 0.014295] cpuidle: using governor menu
  160. [ 0.014351] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  161. [ 0.014373] ASID allocator initialised with 32768 entries
  162. [ 0.014589] Serial: AMBA PL011 UART driver
  163. [ 0.015337] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000
  164. [ 0.015493] bcm2835-mbox 107c013880.mailbox: mailbox enabled
  165. [ 0.015618] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3
  166. [ 0.015627] printk: legacy console [ttyAMA10] enabled
  167. [ 0.024213] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2025-10-17T09:48:37, variant start_cd
  168. [ 0.028219] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is b66568da00000000000000000000000000000000
  169. [ 0.036854] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
  170. [ 0.037109] iommu: Default domain type: Translated
  171. [ 0.037111] iommu: DMA domain TLB invalidation policy: strict mode
  172. [ 0.037410] SCSI subsystem initialized
  173. [ 0.037439] usbcore: registered new interface driver usbfs
  174. [ 0.037445] usbcore: registered new interface driver hub
  175. [ 0.037450] usbcore: registered new device driver usb
  176. [ 0.037514] pps_core: LinuxPPS API ver. 1 registered
  177. [ 0.037516] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  178. [ 0.037519] PTP clock support registered
  179. [ 0.037773] vgaarb: loaded
  180. [ 0.037861] clocksource: Switched to clocksource arch_sys_counter
  181. [ 0.242838] VFS: Disk quotas dquot_6.6.0
  182. [ 0.242849] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
  183. [ 0.244029] NET: Registered PF_INET protocol family
  184. [ 0.244335] IP idents hash table entries: 262144 (order: 7, 2097152 bytes, vmalloc)
  185. [ 0.247255] tcp_listen_portaddr_hash hash table entries: 8192 (order: 3, 131072 bytes, vmalloc)
  186. [ 0.247308] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc)
  187. [ 0.247322] TCP established hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc)
  188. [ 0.247682] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc)
  189. [ 0.248359] TCP: Hash tables configured (established 131072 bind 65536)
  190. [ 0.248501] MPTCP token hash table entries: 16384 (order: 4, 393216 bytes, vmalloc)
  191. [ 0.248584] UDP hash table entries: 8192 (order: 4, 262144 bytes, vmalloc)
  192. [ 0.248707] UDP-Lite hash table entries: 8192 (order: 4, 262144 bytes, vmalloc)
  193. [ 0.248865] NET: Registered PF_UNIX/PF_LOCAL protocol family
  194. [ 0.249022] RPC: Registered named UNIX socket transport module.
  195. [ 0.249024] RPC: Registered udp transport module.
  196. [ 0.249025] RPC: Registered tcp transport module.
  197. [ 0.249026] RPC: Registered tcp-with-tls transport module.
  198. [ 0.249027] RPC: Registered tcp NFSv4.1 backchannel transport module.
  199. [ 0.249032] PCI: CLS 0 bytes, default 64
  200. [ 0.249157] Trying to unpack rootfs image as initramfs...
  201. [ 0.254941] kvm [1]: nv: 554 coarse grained trap handlers
  202. [ 0.255051] kvm [1]: IPA Size Limit: 40 bits
  203. [ 0.255068] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
  204. [ 0.255099] kvm [1]: vgic interrupt IRQ9
  205. [ 0.255110] kvm [1]: VHE mode initialized successfully
  206. [ 0.255629] Initialise system trusted keyrings
  207. [ 0.255815] workingset: timestamp_bits=42 max_order=20 bucket_order=0
  208. [ 0.256160] NFS: Registering the id_resolver key type
  209. [ 0.256169] Key type id_resolver registered
  210. [ 0.256171] Key type id_legacy registered
  211. [ 0.256182] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  212. [ 0.256184] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  213. [ 0.256379] Key type asymmetric registered
  214. [ 0.256383] Asymmetric key parser 'x509' registered
  215. [ 0.256404] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  216. [ 0.256446] io scheduler mq-deadline registered
  217. [ 0.256448] io scheduler kyber registered
  218. [ 0.256462] io scheduler bfq registered
  219. [ 0.256828] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27)
  220. [ 0.256863] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28)
  221. [ 0.256891] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508380, parent irq: 29)
  222. [ 0.256926] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508400, parent irq: 30)
  223. [ 0.256955] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31)
  224. [ 0.257974] ledtrig-cpu: registered to indicate activity on CPUs
  225. [ 0.357159] Freeing initrd memory: 13280K
  226. [ 0.358161] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
  227. [ 0.358174] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
  228. [ 0.358465] Console: switching to colour frame buffer device 240x67
  229. [ 0.360033] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
  230. [ 0.390219] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  231. [ 0.390498] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
  232. [ 0.390535] serial serial0: tty port ttyS0 registered
  233. [ 0.390786] iproc-rng200 107d208000.rng: hwrng registered
  234. [ 0.390821] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
  235. [ 0.391003] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
  236. [ 0.392268] brd: module loaded
  237. [ 0.393099] loop: module loaded
  238. [ 0.393186] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  239. [ 0.393285] Loading iSCSI transport class v2.0-870.
  240. [ 0.393990] usbcore: registered new interface driver lan78xx
  241. [ 0.394003] usbcore: registered new interface driver smsc95xx
  242. [ 0.394048] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  243. [ 0.394063] dwc_otg: FIQ enabled
  244. [ 0.394064] dwc_otg: NAK holdoff enabled
  245. [ 0.394065] dwc_otg: FIQ split-transaction FSM enabled
  246. [ 0.394067] Module dwc_common_port init
  247. [ 0.394267] usbcore: registered new interface driver uas
  248. [ 0.394277] usbcore: registered new interface driver usb-storage
  249. [ 0.394342] mousedev: PS/2 mouse device common for all mice
  250. [ 0.396701] rpi-rtc soc@107c000000:rpi_rtc: trickle charging enabled at 3200000uV
  251. [ 0.401974] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0
  252. [ 0.403380] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 2025-11-04T23:54:41 UTC (1762300481)
  253. [ 0.403671] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
  254. [ 0.403674] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  255. [ 0.405710] sdhci: Secure Digital Host Controller Interface driver
  256. [ 0.405712] sdhci: Copyright(c) Pierre Ossman
  257. [ 0.405740] sdhci-pltfm: SDHCI platform and OF driver helper
  258. [ 0.405805] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  259. [ 0.405813] hid: raw HID events driver (C) Jiri Kosina
  260. [ 0.405829] usbcore: registered new interface driver usbhid
  261. [ 0.405830] usbhid: USB HID core driver
  262. [ 0.406125] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
  263. [ 0.406337] NET: Registered PF_PACKET protocol family
  264. [ 0.406357] Key type dns_resolver registered
  265. [ 0.409820] registered taskstats version 1
  266. [ 0.409886] Loading compiled-in X.509 certificates
  267. [ 0.411292] Demotion targets for Node 0: null
  268. [ 0.411295] Demotion targets for Node 1: null
  269. [ 0.411296] Demotion targets for Node 2: null
  270. [ 0.411297] Demotion targets for Node 3: null
  271. [ 0.411298] Demotion targets for Node 4: null
  272. [ 0.411299] Demotion targets for Node 5: null
  273. [ 0.411300] Demotion targets for Node 6: null
  274. [ 0.411301] Demotion targets for Node 7: null
  275. [ 0.411471] Key type .fscrypt registered
  276. [ 0.411473] Key type fscrypt-provisioning registered
  277. [ 0.412171] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:
  278. [ 0.412175] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@1000110000, using [bus 00-ff]
  279. [ 0.412182] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
  280. [ 0.412187] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
  281. [ 0.412192] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
  282. [ 0.412196] brcm-pcie 1000110000.pcie: IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000
  283. [ 0.413575] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00
  284. [ 0.413578] pci_bus 0001:00: root bus resource [bus 00-ff]
  285. [ 0.413581] pci_bus 0001:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
  286. [ 0.413584] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
  287. [ 0.413595] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
  288. [ 0.413601] pci 0001:00:00.0: PCI bridge to [bus 00]
  289. [ 0.413603] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  290. [ 0.413607] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  291. [ 0.413622] pci 0001:00:00.0: PME# supported from D0 D3hot
  292. [ 0.414195] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  293. [ 0.517865] brcm-pcie 1000110000.pcie: clkreq-mode set to safe
  294. [ 0.517867] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)
  295. [ 0.517887] pci 0001:01:00.0: [1b21:1182] type 01 class 0x060400 PCIe Switch Upstream Port
  296. [ 0.517908] pci 0001:01:00.0: PCI bridge to [bus 00]
  297. [ 0.517915] pci 0001:01:00.0: bridge window [io 0x0000-0x0fff]
  298. [ 0.517918] pci 0001:01:00.0: bridge window [mem 0x00000000-0x000fffff]
  299. [ 0.517928] pci 0001:01:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  300. [ 0.517939] pci 0001:01:00.0: enabling Extended Tags
  301. [ 0.517991] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
  302. [ 0.525868] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  303. [ 0.525990] pci 0001:02:03.0: [1b21:1182] type 01 class 0x060400 PCIe Switch Downstream Port
  304. [ 0.526011] pci 0001:02:03.0: PCI bridge to [bus 00]
  305. [ 0.526017] pci 0001:02:03.0: bridge window [io 0x0000-0x0fff]
  306. [ 0.526021] pci 0001:02:03.0: bridge window [mem 0x00000000-0x000fffff]
  307. [ 0.526030] pci 0001:02:03.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  308. [ 0.526043] pci 0001:02:03.0: enabling Extended Tags
  309. [ 0.526092] pci 0001:02:03.0: PME# supported from D0 D3hot D3cold
  310. [ 0.526224] pci 0001:02:07.0: [1b21:1182] type 01 class 0x060400 PCIe Switch Downstream Port
  311. [ 0.526246] pci 0001:02:07.0: PCI bridge to [bus 00]
  312. [ 0.526251] pci 0001:02:07.0: bridge window [io 0x0000-0x0fff]
  313. [ 0.526255] pci 0001:02:07.0: bridge window [mem 0x00000000-0x000fffff]
  314. [ 0.526264] pci 0001:02:07.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  315. [ 0.526277] pci 0001:02:07.0: enabling Extended Tags
  316. [ 0.526325] pci 0001:02:07.0: PME# supported from D0 D3hot D3cold
  317. [ 0.526788] pci 0001:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  318. [ 0.526795] pci 0001:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  319. [ 0.526862] pci 0001:03:00.0: [1dbe:5220] type 00 class 0x010802 PCIe Endpoint
  320. [ 0.526887] pci 0001:03:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
  321. [ 0.527143] pci 0001:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
  322. [ 0.533876] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03
  323. [ 0.533946] pci 0001:04:00.0: [1dbe:5220] type 00 class 0x010802 PCIe Endpoint
  324. [ 0.533971] pci 0001:04:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
  325. [ 0.534226] pci 0001:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
  326. [ 0.541896] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
  327. [ 0.541901] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 04
  328. [ 0.541906] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 04
  329. [ 0.541914] pci 0001:00:00.0: bridge window [mem 0x1b80000000-0x1b801fffff]: assigned
  330. [ 0.541917] pci 0001:01:00.0: bridge window [mem 0x1b80000000-0x1b801fffff]: assigned
  331. [ 0.541919] pci 0001:02:03.0: bridge window [mem 0x1b80000000-0x1b800fffff]: assigned
  332. [ 0.541921] pci 0001:02:07.0: bridge window [mem 0x1b80100000-0x1b801fffff]: assigned
  333. [ 0.541924] pci 0001:03:00.0: BAR 0 [mem 0x1b80000000-0x1b80003fff 64bit]: assigned
  334. [ 0.541935] pci 0001:02:03.0: PCI bridge to [bus 03]
  335. [ 0.541940] pci 0001:02:03.0: bridge window [mem 0x1b80000000-0x1b800fffff]
  336. [ 0.541947] pci 0001:04:00.0: BAR 0 [mem 0x1b80100000-0x1b80103fff 64bit]: assigned
  337. [ 0.541959] pci 0001:02:07.0: PCI bridge to [bus 04]
  338. [ 0.541963] pci 0001:02:07.0: bridge window [mem 0x1b80100000-0x1b801fffff]
  339. [ 0.541969] pci 0001:01:00.0: PCI bridge to [bus 02-04]
  340. [ 0.541973] pci 0001:01:00.0: bridge window [mem 0x1b80000000-0x1b801fffff]
  341. [ 0.541979] pci 0001:00:00.0: PCI bridge to [bus 01-04]
  342. [ 0.541981] pci 0001:00:00.0: bridge window [mem 0x1b80000000-0x1b801fffff]
  343. [ 0.541983] pci_bus 0001:00: resource 4 [mem 0x1b80000000-0x1bffffffff]
  344. [ 0.541985] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1b7fffffff pref]
  345. [ 0.541988] pci_bus 0001:01: resource 1 [mem 0x1b80000000-0x1b801fffff]
  346. [ 0.541989] pci_bus 0001:02: resource 1 [mem 0x1b80000000-0x1b801fffff]
  347. [ 0.541991] pci_bus 0001:03: resource 1 [mem 0x1b80000000-0x1b800fffff]
  348. [ 0.541993] pci_bus 0001:04: resource 1 [mem 0x1b80100000-0x1b801fffff]
  349. [ 0.541996] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
  350. [ 0.542003] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
  351. [ 0.542009] pci 0001:02:03.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
  352. [ 0.542019] pci 0001:03:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
  353. [ 0.542025] pci 0001:02:07.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
  354. [ 0.542035] pci 0001:04:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
  355. [ 0.542091] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
  356. [ 0.542116] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
  357. [ 0.542165] pcieport 0001:00:00.0: AER: enabled with IRQ 38
  358. [ 0.542216] pcieport 0001:01:00.0: enabling device (0000 -> 0002)
  359. [ 0.542303] pcieport 0001:02:03.0: enabling device (0000 -> 0002)
  360. [ 0.542430] pcieport 0001:02:07.0: enabling device (0000 -> 0002)
  361. [ 0.542615] nvme nvme0: pci function 0001:03:00.0
  362. [ 0.542636] nvme 0001:03:00.0: enabling device (0000 -> 0002)
  363. [ 0.545943] hwmon hwmon1: temp1_input not attached to any thermal zone
  364. [ 0.545958] hwmon hwmon1: temp2_input not attached to any thermal zone
  365. [ 0.545971] hwmon hwmon1: temp3_input not attached to any thermal zone
  366. [ 0.545974] nvme nvme0: min host memory (8 MiB) above limit (0 MiB).
  367. [ 0.546518] nvme nvme0: 4/0/0 default/read/poll queues
  368. [ 0.550661] nvme nvme1: pci function 0001:04:00.0
  369. [ 0.550683] nvme 0001:04:00.0: enabling device (0000 -> 0002)
  370. [ 0.554019] hwmon hwmon2: temp1_input not attached to any thermal zone
  371. [ 0.554034] hwmon hwmon2: temp2_input not attached to any thermal zone
  372. [ 0.554047] hwmon hwmon2: temp3_input not attached to any thermal zone
  373. [ 0.554050] nvme nvme1: min host memory (8 MiB) above limit (0 MiB).
  374. [ 0.554320] nvme nvme1: 1/0/0 default/read/poll queues
  375. [ 0.555582] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
  376. [ 0.555587] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@1000120000, using [bus 00-ff]
  377. [ 0.555594] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
  378. [ 0.555598] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
  379. [ 0.555603] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
  380. [ 0.555608] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
  381. [ 0.555613] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
  382. [ 0.556754] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
  383. [ 0.556758] pci_bus 0002:00: root bus resource [bus 00-ff]
  384. [ 0.556761] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
  385. [ 0.556763] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
  386. [ 0.556772] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
  387. [ 0.556778] pci 0002:00:00.0: PCI bridge to [bus 00]
  388. [ 0.556780] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff]
  389. [ 0.556795] pci 0002:00:00.0: PME# supported from D0 D3hot
  390. [ 0.557398] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  391. [ 0.657862] brcm-pcie 1000120000.pcie: clkreq-mode set to default
  392. [ 0.657864] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
  393. [ 0.657885] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
  394. [ 0.657897] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
  395. [ 0.657903] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
  396. [ 0.657908] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
  397. [ 0.657971] pci 0002:01:00.0: supports D1
  398. [ 0.657972] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
  399. [ 0.665868] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
  400. [ 0.665877] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]: assigned
  401. [ 0.665880] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
  402. [ 0.665884] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
  403. [ 0.665888] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
  404. [ 0.665891] pci 0002:00:00.0: PCI bridge to [bus 01]
  405. [ 0.665894] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
  406. [ 0.665896] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
  407. [ 0.665898] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
  408. [ 0.665900] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f005fffff]
  409. [ 0.665903] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
  410. [ 0.665910] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
  411. [ 0.665952] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
  412. [ 0.665975] pcieport 0002:00:00.0: PME: Signaling with IRQ 48
  413. [ 0.666046] pcieport 0002:00:00.0: AER: enabled with IRQ 48
  414. [ 0.666112] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
  415. [ 0.666115] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
  416. [ 0.666125] rp1 0002:01:00.0: enabling device (0000 -> 0002)
  417. [ 0.666736] rp1 0002:01:00.0: chip_id 0x20001927
  418. [ 0.671623] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  419. [ 0.671998] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
  420. [ 0.672397] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  421. [ 0.672753] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
  422. [ 0.673195] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  423. [ 0.673551] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
  424. [ 0.673852] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 110
  425. [ 0.674000] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
  426. [ 0.674118] mmc1: CQHCI version 5.10
  427. [ 0.674121] mmc0: CQHCI version 5.10
  428. [ 0.689032] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 116 (88:a2:9e:04:02:30)
  429. [ 0.689745] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
  430. [ 0.689965] xhci-hcd xhci-hcd.0: xHCI Host Controller
  431. [ 0.689970] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
  432. [ 0.690403] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
  433. [ 0.690411] xhci-hcd xhci-hcd.0: irq 141, io mem 0x1f00200000
  434. [ 0.690478] xhci-hcd xhci-hcd.0: xHCI Host Controller
  435. [ 0.690481] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
  436. [ 0.690483] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
  437. [ 0.690523] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
  438. [ 0.690526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  439. [ 0.690528] usb usb1: Product: xHCI Host Controller
  440. [ 0.690530] usb usb1: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd
  441. [ 0.690531] usb usb1: SerialNumber: xhci-hcd.0
  442. [ 0.690633] hub 1-0:1.0: USB hub found
  443. [ 0.690645] hub 1-0:1.0: 2 ports detected
  444. [ 0.690743] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
  445. [ 0.690746] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  446. [ 0.690748] usb usb2: Product: xHCI Host Controller
  447. [ 0.690749] usb usb2: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd
  448. [ 0.690751] usb usb2: SerialNumber: xhci-hcd.0
  449. [ 0.690813] hub 2-0:1.0: USB hub found
  450. [ 0.690823] hub 2-0:1.0: 1 port detected
  451. [ 0.691030] xhci-hcd xhci-hcd.1: xHCI Host Controller
  452. [ 0.691034] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
  453. [ 0.691461] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
  454. [ 0.691469] xhci-hcd xhci-hcd.1: irq 146, io mem 0x1f00300000
  455. [ 0.691539] xhci-hcd xhci-hcd.1: xHCI Host Controller
  456. [ 0.691541] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
  457. [ 0.691543] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
  458. [ 0.691571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
  459. [ 0.691574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  460. [ 0.691575] usb usb3: Product: xHCI Host Controller
  461. [ 0.691577] usb usb3: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd
  462. [ 0.691578] usb usb3: SerialNumber: xhci-hcd.1
  463. [ 0.691643] hub 3-0:1.0: USB hub found
  464. [ 0.691654] hub 3-0:1.0: 2 ports detected
  465. [ 0.691731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
  466. [ 0.691733] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  467. [ 0.691735] usb usb4: Product: xHCI Host Controller
  468. [ 0.691736] usb usb4: Manufacturer: Linux 6.12.47+rpt-rpi-2712 xhci-hcd
  469. [ 0.691737] usb usb4: SerialNumber: xhci-hcd.1
  470. [ 0.691797] hub 4-0:1.0: USB hub found
  471. [ 0.691807] hub 4-0:1.0: 1 port detected
  472. [ 0.693888] of_cfs_init
  473. [ 0.693914] of_cfs_init: OK
  474. [ 0.693984] clk: Disabling unused clocks
  475. [ 0.702762] PM: genpd: Disabling unused power domains
  476. [ 0.712960] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
  477. [ 0.860399] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
  478. [ 0.863256] Freeing unused kernel memory: 5696K
  479. [ 0.863346] Run /init as init process
  480. [ 0.863348] with arguments:
  481. [ 0.863349] /init
  482. [ 0.863350] splash
  483. [ 0.863351] with environment:
  484. [ 0.863352] HOME=/
  485. [ 0.863353] TERM=linux
  486. [ 0.889277] mmc0: new ultra high speed SDR104 SDXC card at address 0001
  487. [ 0.889556] mmcblk0: mmc0:0001 FE2Y7 239 GiB
  488. [ 0.890521] mmcblk0: p1 p2
  489. [ 0.890603] mmcblk0: mmc0:0001 FE2Y7 239 GiB
  490. [ 0.890660] mmc1: new ultra high speed DDR50 SDIO card at address 0001
  491. [ 0.937914] usb 3-2: new full-speed USB device number 2 using xhci-hcd
  492. [ 0.937948] usb 1-2: new full-speed USB device number 2 using xhci-hcd
  493. [ 0.977371] v3d 1002000000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform!
  494. [ 0.981471] [drm] Initialized v3d 1.0.0 for 1002000000.v3d on minor 0
  495. [ 0.991005] vc4_hvs 107c580000.hvs: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
  496. [ 0.991013] vc4_hvs 107c580000.hvs: bcm2712_iommu_probe_device: MMU 1000005200.iommu
  497. [ 0.991018] vc4_hvs 107c580000.hvs: bcm2712_iommu_device_group: MMU 1000005200.iommu
  498. [ 0.991734] vc4_hvs 107c580000.hvs: Adding to iommu group 1
  499. [ 0.991743] vc4_hvs 107c580000.hvs: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
  500. [ 0.994861] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
  501. [ 0.994870] vc4-drm axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
  502. [ 0.994875] vc4-drm axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
  503. [ 0.994880] vc4-drm axi:gpu: Adding to iommu group 1
  504. [ 0.994883] vc4-drm axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
  505. [ 0.995899] Console: switching to colour dummy device 80x25
  506. [ 0.998387] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  507. [ 1.028856] md/raid1:md0: active with 2 out of 2 mirrors
  508. [ 1.029236] md0: detected capacity change from 0 to 4000533120
  509. [ 1.029849] md0: p1
  510. [ 1.102540] usb 1-2: New USB device found, idVendor=1a86, idProduct=e5e3, bcdDevice= 0.00
  511. [ 1.102547] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  512. [ 1.102549] usb 1-2: Product: USB2IIC_CTP_CONTROL
  513. [ 1.102551] usb 1-2: Manufacturer: wch.cn
  514. [ 1.107603] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
  515. [ 1.107607] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  516. [ 1.107608] usb 3-2: Product: USB Receiver
  517. [ 1.107610] usb 3-2: Manufacturer: Logitech
  518. [ 1.121942] input: wch.cn USB2IIC_CTP_CONTROL as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:1A86:E5E3.0001/input/input0
  519. [ 1.122022] hid-generic 0003:1A86:E5E3.0001: input,hidraw0: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-xhci-hcd.0-2/input0
  520. [ 1.124435] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  521. [ 1.128594] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  522. [ 1.149767] input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:046D:C52B.0002/input/input1
  523. [ 1.297915] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.1-2/input0
  524. [ 1.300250] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  525. [ 1.315605] input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C52B.0003/input/input2
  526. [ 1.315689] input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C52B.0003/input/input3
  527. [ 1.369896] input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C52B.0003/input/input4
  528. [ 1.369970] hid-generic 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.1-2/input1
  529. [ 1.372272] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  530. [ 1.375795] hid-generic 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.1-2/input2
  531. [ 1.378120] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  532. [ 1.469859] raid6: neonx8 gen() 12508 MB/s
  533. [ 1.537865] raid6: neonx4 gen() 9795 MB/s
  534. [ 1.605864] raid6: neonx2 gen() 8184 MB/s
  535. [ 1.673876] raid6: neonx1 gen() 7425 MB/s
  536. [ 1.741875] raid6: int64x8 gen() 5090 MB/s
  537. [ 1.809860] raid6: int64x4 gen() 4894 MB/s
  538. [ 1.877872] raid6: int64x2 gen() 3861 MB/s
  539. [ 1.945870] raid6: int64x1 gen() 3688 MB/s
  540. [ 1.945872] raid6: using algorithm neonx8 gen() 12508 MB/s
  541. [ 2.013865] raid6: .... xor() 8079 MB/s, rmw enabled
  542. [ 2.013866] raid6: using neon recovery algorithm
  543. [ 2.014107] async_tx: api initialized (async)
  544. [ 2.014397] xor: measuring software checksum speed
  545. [ 2.014607] 8regs : 15744 MB/sec
  546. [ 2.014818] 32regs : 15727 MB/sec
  547. [ 2.014969] arm64_neon : 21913 MB/sec
  548. [ 2.014970] xor: using function: arm64_neon (21913 MB/sec)
  549. [ 2.153512] usb 1-2: USB disconnect, device number 2
  550. [ 2.171019] EXT4-fs (mmcblk0p2): mounted filesystem d6ecfcd5-2703-41bf-9301-10c403b6fb0c ro with ordered data mode. Quota mode: none.
  551. [ 2.416822] NET: Registered PF_INET6 protocol family
  552. [ 2.417142] Segment Routing with IPv6
  553. [ 2.417149] In-situ OAM (IOAM) with IPv6
  554. [ 2.436280] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  555. [ 2.436288] systemd[1]: Detected architecture arm64.
  556. [ 2.441653] systemd[1]: Hostname set to <andreyspi>.
  557. [ 2.686998] systemd[1]: Queued start job for default target graphical.target.
  558. [ 2.730345] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  559. [ 2.730586] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  560. [ 2.730762] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  561. [ 2.730932] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
  562. [ 2.731028] systemd[1]: Created slice user.slice - User and Session Slice.
  563. [ 2.731085] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  564. [ 2.731226] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
  565. [ 2.731246] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-28225e8e\x2d01.device - /dev/disk/by-partuuid/28225e8e-01...
  566. [ 2.731255] systemd[1]: Expecting device dev-disk-by\x2duuid-07b3c261\x2d77bc\x2d4b31\x2d9079\x2d6227ec27bf3b.device - /dev/disk/by-uuid/07b3c261-77bc-4b31-9079-6227ec27bf3b...
  567. [ 2.731263] systemd[1]: Expecting device dev-dri-card0.device - /dev/dri/card0...
  568. [ 2.731270] systemd[1]: Expecting device dev-dri-renderD128.device - /dev/dri/renderD128...
  569. [ 2.731277] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
  570. [ 2.731305] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  571. [ 2.731332] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
  572. [ 2.731355] systemd[1]: Reached target slices.target - Slice Units.
  573. [ 2.731373] systemd[1]: Reached target swap.target - Swaps.
  574. [ 2.731395] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  575. [ 2.731501] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  576. [ 2.731547] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  577. [ 2.731733] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  578. [ 2.731818] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  579. [ 2.731901] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  580. [ 2.732245] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  581. [ 2.732311] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  582. [ 2.732426] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
  583. [ 2.732995] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  584. [ 2.733722] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  585. [ 2.734477] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  586. [ 2.734616] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  587. [ 2.736125] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
  588. [ 2.736946] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
  589. [ 2.737842] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  590. [ 2.739261] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
  591. [ 2.740544] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  592. [ 2.741663] systemd[1]: Starting [email protected] - Load Kernel Module drm...
  593. [ 2.743036] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  594. [ 2.744439] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
  595. [ 2.745969] systemd[1]: Starting [email protected] - Load Kernel Module loop...
  596. [ 2.746136] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
  597. [ 2.748028] systemd[1]: Starting systemd-journald.service - Journal Service...
  598. [ 2.752895] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  599. [ 2.753847] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  600. [ 2.754860] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  601. [ 2.756717] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  602. [ 2.757042] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  603. [ 2.757235] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  604. [ 2.757530] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  605. [ 2.757856] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
  606. [ 2.758113] systemd[1]: [email protected]: Deactivated successfully.
  607. [ 2.758240] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
  608. [ 2.760672] fuse: init (API version 7.41)
  609. [ 2.761186] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  610. [ 2.761320] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  611. [ 2.762282] systemd[1]: [email protected]: Deactivated successfully.
  612. [ 2.762411] systemd[1]: Finished [email protected] - Load Kernel Module drm.
  613. [ 2.762787] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  614. [ 2.762906] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  615. [ 2.763185] systemd[1]: [email protected]: Deactivated successfully.
  616. [ 2.763271] systemd[1]: Finished [email protected] - Load Kernel Module fuse.
  617. [ 2.763440] systemd[1]: [email protected]: Deactivated successfully.
  618. [ 2.763512] systemd[1]: Finished [email protected] - Load Kernel Module loop.
  619. [ 2.765388] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  620. [ 2.769604] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
  621. [ 2.769773] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  622. [ 2.771703] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
  623. [ 2.771855] i2c_dev: i2c /dev entries driver
  624. [ 2.771991] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  625. [ 2.772804] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  626. [ 2.773046] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
  627. [ 2.774141] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  628. [ 2.794193] EXT4-fs (mmcblk0p2): re-mounted d6ecfcd5-2703-41bf-9301-10c403b6fb0c r/w.
  629. [ 2.795410] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  630. [ 2.795666] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
  631. [ 2.795703] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  632. [ 2.822127] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
  633. [ 2.823307] systemd[1]: Starting systemd-sysusers.service - Create System Users...
  634. [ 2.823551] systemd[1]: Started systemd-journald.service - Journal Service.
  635. [ 2.841398] systemd-journald[345]: Received client request to flush runtime journal.
  636. [ 2.853900] usb 1-2: new full-speed USB device number 3 using xhci-hcd
  637. [ 3.006652] usb 1-2: New USB device found, idVendor=1a86, idProduct=e5e3, bcdDevice= 0.00
  638. [ 3.006662] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  639. [ 3.006665] usb 1-2: Product: USB2IIC_CTP_CONTROL
  640. [ 3.006666] usb 1-2: Manufacturer: wch.cn
  641. [ 3.044829] input: wch.cn USB2IIC_CTP_CONTROL as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:1A86:E5E3.0005/input/input6
  642. [ 3.048904] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
  643. [ 3.048966] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
  644. [ 3.049579] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
  645. [ 3.049632] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
  646. [ 3.049654] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
  647. [ 3.049687] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
  648. [ 3.049700] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
  649. [ 3.049729] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
  650. [ 3.049783] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
  651. [ 3.049811] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
  652. [ 3.051433] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  653. [ 3.052469] hid-generic 0003:1A86:E5E3.0005: input,hidraw0: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-xhci-hcd.0-2/input0
  654. [ 3.055823] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  655. [ 3.060134] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  656. [ 3.069257] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  657. [ 3.075760] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  658. [ 3.080826] rp1-firmware rp1_firmware: RP1 Firmware version eb39cfd516f8c90628aa9d91f52370aade5d0a55
  659. [ 3.085025] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  660. [ 3.105310] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  661. [ 3.110237] mc: Linux media interface: v0.10
  662. [ 3.110518] Registered IR keymap rc-rc6-mce
  663. [ 3.115875] IR RC6 protocol handler initialized
  664. [ 3.131855] rp1-pio 1f00178000.pio: Created instance as pio0
  665. [ 3.137991] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@d/rc/rc0
  666. [ 3.138568] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
  667. [ 3.138614] input: gpio_ir_recv as /devices/platform/ir-receiver@d/rc/rc0/input7
  668. [ 3.140388] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  669. [ 3.143173] input: pwr_button as /devices/platform/pwr_button/input/input8
  670. [ 3.149079] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  671. [ 3.165947] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
  672. [ 3.167477] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
  673. [ 3.168501] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  674. [ 3.168668] videodev: Linux video capture interface: v2.00
  675. [ 3.178136] Registered IR keymap rc-cec
  676. [ 3.178202] rc rc1: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc1
  677. [ 3.178251] input: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc1/input9
  678. [ 3.245176] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
  679. [ 3.245184] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
  680. [ 3.245189] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
  681. [ 3.245193] rpi-hevc-dec 1000800000.codec: Adding to iommu group 0
  682. [ 3.245197] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
  683. [ 3.247422] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
  684. [ 3.247428] pispbe 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
  685. [ 3.247433] pispbe 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
  686. [ 3.247438] pispbe 1000880000.pisp_be: Adding to iommu group 0
  687. [ 3.247441] pispbe 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
  688. [ 3.248626] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19
  689. [ 3.329229] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/input10
  690. [ 3.349854] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.1-2/input2
  691. [ 3.367076] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
  692. [ 3.370248] Registered IR keymap rc-cec
  693. [ 3.387674] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  694. [ 3.391991] rc rc2: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc2
  695. [ 3.392294] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
  696. [ 3.392435] input: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc2/input11
  697. [ 3.392502] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
  698. [ 3.392695] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  699. [ 3.392939] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  700. [ 3.398745] Bluetooth: Core ver 2.22
  701. [ 3.398764] NET: Registered PF_BLUETOOTH protocol family
  702. [ 3.398765] Bluetooth: HCI device and connection manager initialized
  703. [ 3.398771] Bluetooth: HCI socket layer initialized
  704. [ 3.398774] Bluetooth: L2CAP socket layer initialized
  705. [ 3.398777] Bluetooth: SCO socket layer initialized
  706. [ 3.413678] Bluetooth: HCI UART driver ver 2.3
  707. [ 3.413691] Bluetooth: HCI UART protocol H4 registered
  708. [ 3.413734] Bluetooth: HCI UART protocol Three-wire (H5) registered
  709. [ 3.413974] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  710. [ 3.414053] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  711. [ 3.415332] Bluetooth: HCI UART protocol Broadcom registered
  712. [ 3.425123] brcmfmac: F1 signature read @0x18000000=0x15264345
  713. [ 3.428155] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  714. [ 3.428310] usbcore: registered new interface driver brcmfmac
  715. [ 3.439261] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/input12
  716. [ 3.464095] input: Logitech Wireless Device PID:404d Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:404D.0006/input/input13
  717. [ 3.498951] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
  718. [ 3.499070] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
  719. [ 3.499124] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
  720. [ 3.499176] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
  721. [ 3.499217] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
  722. [ 3.542705] input: wch.cn USB2IIC_CTP_CONTROL as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:1A86:E5E3.0005/input/input18
  723. [ 3.550413] [drm] Initialized vc4 0.0.0 for axi:gpu on minor 1
  724. [ 3.622030] input: Logitech Wireless Device PID:404d Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:404D.0006/input/input14
  725. [ 3.622111] hid-multitouch 0003:1A86:E5E3.0005: input,hidraw0: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-xhci-hcd.0-2/input0
  726. [ 3.622149] hid-generic 0003:046D:404D.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-xhci-hcd.1-2/input2:1
  727. [ 3.626130] Console: switching to colour frame buffer device 128x37
  728. [ 3.643063] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
  729. [ 3.664847] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
  730. [ 3.665129] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
  731. [ 3.766907] Bluetooth: hci0: BCM: chip id 107
  732. [ 3.767128] Bluetooth: hci0: BCM: features 0x2f
  733. [ 3.768185] Bluetooth: hci0: BCM4345C0
  734. [ 3.768188] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
  735. [ 3.772763] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
  736. [ 3.924567] input: Logitech K400 Plus as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:404D.0006/input/input19
  737. [ 3.990177] EXT4-fs (md0p1): mounted filesystem 07b3c261-77bc-4b31-9079-6227ec27bf3b r/w with ordered data mode. Quota mode: none.
  738. [ 4.019967] logitech-hidpp-device 0003:046D:404D.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-xhci-hcd.1-2/input2:1
  739. [ 4.229450] Adding 524272k swap on /var/swap. Priority:-2 extents:3 across:5185536k SS
  740. [ 4.334605] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  741. [ 4.334611] Bluetooth: BNEP filters: protocol multicast
  742. [ 4.334618] Bluetooth: BNEP socket layer initialized
  743. [ 4.455089] Bluetooth: hci0: BCM: features 0x2f
  744. [ 4.456418] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
  745. [ 4.456422] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
  746. [ 4.456705] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
  747. [ 4.475435] Bluetooth: MGMT ver 1.23
  748. [ 4.483627] NET: Registered PF_ALG protocol family
  749. [ 4.928209] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
  750. [ 4.928218] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
  751. [ 4.931351] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
  752. [ 4.962890] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
  753. [ 8.017865] rc rc0: two consecutive events of type space
  754. [ 16.919189] Bluetooth: RFCOMM TTY layer initialized
  755. [ 16.919202] Bluetooth: RFCOMM socket layer initialized
  756. [ 16.919210] Bluetooth: RFCOMM ver 1.11
  757. [ 178.817439] ieee80211 phy0: brcmf_p2p_send_action_frame: Unknown Frame: category 0xa, action 0x8
  758. [ 376.408582] logitech-hidpp-device 0003:046D:404D.0006: HID++ 4.1 device connected.
  759. [ 380.194883] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
  760. [ 448.252010] nvme nvme0: using unchecked data buffer
  761.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!