Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-83-generic] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red
- Device Model: WDC WD10EFRX-68FYTN0
- Serial Number: WD-WCC4J1HEYXC6
- LU WWN Device Id: 5 0014ee 20ce0a7dd
- Firmware Version: 82.00A82
- User Capacity: 1 000 204 886 016 bytes [1,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun Sep 17 19:25:06 2023 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (13320) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 152) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 578
- 3 Spin_Up_Time POS--K 134 120 021 - 4300
- 4 Start_Stop_Count -O--CK 078 078 000 - 22712
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 2
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 061 061 000 - 29116
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 081 081 000 - 19930
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 18
- 193 Load_Cycle_Count -O--CK 193 193 000 - 22694
- 194 Temperature_Celsius -O---K 103 093 000 - 40
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 199 199 000 - 217
- 198 Offline_Uncorrectable ----CK 199 199 000 - 218
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 285
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 483 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 483 [2] occurred at disk power-on lifetime: 29111 hours (1212 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 b8 84 20 40 00 Error: UNC at LBA = 0x00b88420 = 12092448
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 07 e0 00 00 00 00 00 b8 84 30 40 08 21:04:31.471 READ FPDMA QUEUED
- 60 07 e0 00 70 00 00 00 b8 7c 48 40 08 21:04:31.398 READ FPDMA QUEUED
- 60 07 e0 00 f0 00 00 00 b8 74 60 40 08 21:04:27.918 READ FPDMA QUEUED
- 60 07 e0 00 e8 00 00 00 b8 6c 78 40 08 21:04:27.911 READ FPDMA QUEUED
- 60 07 e0 00 50 00 00 00 b8 64 90 40 08 21:04:27.472 READ FPDMA QUEUED
- Error 482 [1] occurred at disk power-on lifetime: 29111 hours (1212 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 b5 e5 c0 40 00 Error: UNC at LBA = 0x00b5e5c0 = 11920832
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 50 00 00 74 70 26 10 40 08 21:04:15.729 READ FPDMA QUEUED
- 60 00 10 00 48 00 00 74 70 24 10 40 08 21:04:15.728 READ FPDMA QUEUED
- 60 00 10 00 40 00 00 00 00 0a 10 40 08 21:04:15.728 READ FPDMA QUEUED
- 60 07 e8 00 38 00 00 00 b5 ec e8 40 08 21:04:15.728 READ FPDMA QUEUED
- 60 07 e8 00 98 00 00 00 b5 e5 00 40 08 21:04:15.728 READ FPDMA QUEUED
- Error 481 [0] occurred at disk power-on lifetime: 29111 hours (1212 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 b5 d8 00 40 00 Error: UNC at LBA = 0x00b5d800 = 11917312
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 07 e8 00 30 00 00 00 b5 e5 00 40 08 21:04:09.719 READ FPDMA QUEUED
- 60 07 e8 00 f0 00 00 00 b5 dd 18 40 08 21:04:09.719 READ FPDMA QUEUED
- 60 07 e8 00 38 00 00 00 b5 d5 30 40 08 21:04:09.719 READ FPDMA QUEUED
- 60 07 e8 00 78 00 00 00 b5 bd 78 40 08 21:04:06.173 READ FPDMA QUEUED
- 60 00 58 00 28 00 00 00 b5 bd 20 40 08 21:04:06.168 READ FPDMA QUEUED
- Error 480 [23] occurred at disk power-on lifetime: 29097 hours (1212 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 05 b3 09 18 40 00 Error: UNC at LBA = 0x05b30918 = 95619352
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 07 e0 00 58 00 00 05 b3 0a c8 40 08 06:33:48.533 READ FPDMA QUEUED
- 60 07 f8 00 b0 00 00 05 b3 02 c8 40 08 06:33:48.530 READ FPDMA QUEUED
- 60 02 10 00 20 00 00 05 b3 00 00 40 08 06:33:48.527 READ FPDMA QUEUED
- 60 02 10 00 50 00 00 05 b2 fc 38 40 08 06:33:48.523 READ FPDMA QUEUED
- 60 02 10 00 18 00 00 05 b2 f8 18 40 08 06:33:48.520 READ FPDMA QUEUED
- Error 479 [22] occurred at disk power-on lifetime: 29096 hours (1212 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 32 01 99 98 40 00 Error: UNC at LBA = 0x32019998 = 838965656
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 b0 00 40 00 00 32 01 a1 a0 40 08 05:36:18.540 READ FPDMA QUEUED
- 60 01 b8 00 70 00 00 32 01 9c 50 40 08 05:36:18.540 READ FPDMA QUEUED
- 60 02 10 00 38 00 00 32 01 98 30 40 08 05:36:18.539 READ FPDMA QUEUED
- 60 00 58 00 30 00 00 3d c6 8d f8 40 08 05:36:18.536 READ FPDMA QUEUED
- 60 00 58 00 20 00 00 3d c6 8c f0 40 08 05:36:18.530 READ FPDMA QUEUED
- Error 478 [21] occurred at disk power-on lifetime: 28929 hours (1205 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 2a 09 18 e0 40 00 Error: WP at LBA = 0x2a0918e0 = 705239264
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 10 00 48 00 00 74 70 26 10 40 08 6d+03:21:30.734 WRITE FPDMA QUEUED
- 61 00 10 00 40 00 00 36 81 e4 e8 40 08 6d+03:21:30.734 WRITE FPDMA QUEUED
- 60 02 10 00 b0 00 00 2a 09 14 20 40 08 6d+03:21:30.734 READ FPDMA QUEUED
- 60 02 10 00 c0 00 00 2a 09 10 00 40 08 6d+03:21:30.734 READ FPDMA QUEUED
- 60 02 10 00 58 00 00 2a 09 18 40 40 08 6d+03:21:30.734 READ FPDMA QUEUED
- Error 477 [20] occurred at disk power-on lifetime: 28929 hours (1205 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 2a 09 0c a8 40 00 Error: WP at LBA = 0x2a090ca8 = 705236136
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 10 00 38 00 00 74 70 24 10 40 08 6d+03:21:25.783 WRITE FPDMA QUEUED
- 61 00 08 00 48 00 00 33 01 51 f0 40 08 6d+03:21:25.783 WRITE FPDMA QUEUED
- 60 02 10 00 a0 00 00 2a 09 08 18 40 08 6d+03:21:25.783 READ FPDMA QUEUED
- 61 00 08 00 b8 00 00 31 00 f8 98 40 08 6d+03:21:25.783 WRITE FPDMA QUEUED
- 60 00 10 00 30 00 00 74 70 26 10 40 08 6d+03:21:25.783 READ FPDMA QUEUED
- Error 476 [19] occurred at disk power-on lifetime: 28929 hours (1205 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 2a 09 00 78 40 00 Error: UNC at LBA = 0x2a090078 = 705233016
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 b0 00 00 74 70 24 10 40 08 6d+03:21:20.662 READ FPDMA QUEUED
- 60 00 10 00 a8 00 00 00 00 0a 10 40 08 6d+03:21:20.662 READ FPDMA QUEUED
- 60 02 10 00 a0 00 00 2a 09 00 30 40 08 6d+03:21:20.662 READ FPDMA QUEUED
- 61 00 08 00 d0 00 00 31 00 f8 90 40 08 6d+03:21:20.662 WRITE FPDMA QUEUED
- 60 01 b8 00 c8 00 00 2a 08 f8 48 40 08 6d+03:21:20.662 READ FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 29113 4529860
- # 2 Extended offline Completed: read failure 90% 29113 4529856
- # 3 Extended offline Completed: read failure 90% 29109 4529860
- # 4 Short offline Completed: read failure 90% 29107 4529860
- # 5 Extended offline Completed: read failure 90% 29053 4529860
- # 6 Short offline Completed: read failure 90% 28956 4529860
- # 7 Short offline Completed: read failure 90% 28789 4529856
- # 8 Extended offline Completed: read failure 90% 28718 4529860
- # 9 Short offline Completed: read failure 90% 28621 4529856
- #10 Extended offline Completed: read failure 90% 28562 4529860
- #11 Short offline Completed: read failure 90% 28551 4529856
- #12 Extended offline Completed: read failure 90% 28504 4529856
- #13 Short offline Completed: read failure 50% 28383 4529856
- #14 Short offline Completed without error 00% 27682 -
- #15 Short offline Completed without error 00% 27133 -
- #16 Short offline Completed without error 00% 26527 -
- #17 Short offline Completed without error 00% 25918 -
- #18 Short offline Completed without error 00% 25329 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 40 Celsius
- Power Cycle Min/Max Temperature: 34/40 Celsius
- Lifetime Min/Max Temperature: 0/50 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (348)
- Index Estimated Time Temperature Celsius
- 349 2023-09-17 11:28 40 *********************
- ... ..(105 skipped). .. *********************
- 455 2023-09-17 13:14 40 *********************
- 456 2023-09-17 13:15 39 ********************
- ... ..( 11 skipped). .. ********************
- 468 2023-09-17 13:27 39 ********************
- 469 2023-09-17 13:28 40 *********************
- ... ..(356 skipped). .. *********************
- 348 2023-09-17 19:25 40 *********************
- SCT Error Recovery Control:
- Read: 70 (7,0 seconds)
- Write: 70 (7,0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 2) ==
- 0x01 0x008 4 19930 --- Lifetime Power-On Resets
- 0x01 0x010 4 29116 --- Power-on Hours
- 0x01 0x018 6 4735804192 --- Logical Sectors Written
- 0x01 0x020 6 57778026 --- Number of Write Commands
- 0x01 0x028 6 6665373824 --- Logical Sectors Read
- 0x01 0x030 6 187919785 --- Number of Read Commands
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 25399 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 25234 --- Head Flying Hours
- 0x03 0x018 4 22713 --- Head Load Events
- 0x03 0x020 4 200 N-- Number of Reallocated Logical Sectors
- 0x03 0x028 4 46885931 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 483 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 393223 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 40 --- Current Temperature
- 0x05 0x010 1 39 --- Average Short Term Temperature
- 0x05 0x018 1 42 --- Average Long Term Temperature
- 0x05 0x020 1 50 --- Highest Temperature
- 0x05 0x028 1 12 --- Lowest Temperature
- 0x05 0x030 1 49 --- Highest Average Short Term Temperature
- 0x05 0x038 1 16 --- Lowest Average Short Term Temperature
- 0x05 0x040 1 42 --- Highest Average Long Term Temperature
- 0x05 0x048 1 22 --- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 20693 --- Number of Hardware Resets
- 0x06 0x010 4 668 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 93070 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement