Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- So, hello everyone, and welcome to this new video.
- Today I want to show a way to defuse Zgooh's and Pi's CBUD bomb. This was a collaboration between me and JeWe, and we spent a lot of time figuring all of this out, so I hope you enjoy! If you don't want to be spoiled too much, I suggest you watch Pi's video first and take a look at the challenge for yourself.
- First of all, let's create a rough overview of the bomb. The core mechanic behind it is a CBUD: a collision box update detector. Zgooh created this device back in September and if you want to know more about it I highly recommend checking out his video, however the core principle is that you can abuse the zombie pathfinding AI to detect when it recalculates its path, and use that to detect whenever a collision box is changed somewhere in the range of the machine. This includes breaking blocks with collisions, placing blocks with collisions, or simply changing the collision box of an existing block. As you can guess, this is a great detector to include in a quasi-undefusable bomb.
- In this particular bomb, the CBUD is connected to no less than five triggers, each of which cause an explosion:
- 1) TNT minecarts on powered rails below the pressure plate
- 2) a BUD'ed dispenser under the pressure plate, which will fire a fire charge into the Ender crystal when it's updated
- 3) a tripwire above the pressure plate which will update the BUD'ed pistons next to it once the zombies leave its hitbox
- 4) a TNT block next to the pressure plate
- 5) a BUD'ed piston which will retract a redstone block, activating two TNT, when updated and unpowered
- Apart from these five triggers, the BUD'ed pistons around the tripwire are part of a larger BUD'ed piston frame, which protects a bit more of the bomb too. On top of that, the Ender crystal, which is a trigger of itself, also blocks the player from accessing some of the crucial components of the machine, like the dispenser and the pressure plate. The bomb also has some other additions, like sponges in several places, some of which are BUD-protected, to prevent you from using water. Now that you're aware of most security measures, let's begin the disarming process. Since there are a lot of coordinates involved, I'll include a copy of the script down in the description, for those who may find it useful.
- Step 1
- Place cobwebs in columns 905 1226 and 905 1225 under the bomb, which will be needed later to pearl our way into the bomb. Since you can't stack up this close to the bomb, we use water to reach the floor of the it. In this clip I place one cobweb more, however it later turned out this one wasn't necessary. Needless to say, the cobwebs can be placed without being detected because they don't change any collision boxes.
- Step 2
- Pearl into the bomb in column 905 1225, until you reach the minecart chamber. We break all minecarts, which deals with the first trigger. To disable the second trigger, the dispenser, we remove its contents. Since it's protected by the Ender crystal's hitbox, we use a hopper minecart to extract the items. Afterwards, we ender pearl our way out of the bomb.
- Step 3
- Set up your own CBUD outside the bomb at specific coordinates: put the zombie on top of the block with coordinates 920 69 1254, put the villager on top of the block with coordinates 885 69 1254 and build the main walkway out at the Z-coordinate 1264. Also use a skull for this CBUD, to give it a quicker trigger than the one inside the bomb. Furthermore, connect the output to a holding cell to let a wolf drop into water. Do not connect the redstone for the time being, since it makes the circuit unstable. The CBUD can also be built earlier, it will simply be necessary in step 5 in order to detect breaking a certain block on the inside of the bomb. By using this shape and the maximal path length we can just reach the blocks we need to reach while staying out of the range of the bomb's CBUD.
- Step 4
- Go far away, in our case 1500 blocks, and use a Nether portal to go to the Nether. Then go back to the corresponding location of the bomb and position a boat as closely as possible to the coordinates 112.875 73 153.125. You can easily find out the boat's coordinates by sitting inside of it. When you're done, teleport the boat to the Overworld with a Nether portal. Make sure the portal you used for player transportation is too far for this portal to connect to. This way, the boat will not find a suitable portal in range and will simply teleport to its corresponding coordinates in the Overworld. Since 1.9 this only creates a new Nether portal when a player is going through. If all goes well, it should teleport close to the string inside the bomb. If it's one block off it will usually still be inside of the string's hitbox. This demonstrates why we needed a boat: entities which are contained in a 1x1 area could not have stayed inside of the string (unless theyr'e at least 2 blocks high), since after teleporting entities will always be centered on a block and because the string is resting on top of a cobblestone fence, we need to use one of the blocks next to it in order to hold up an entity at the right height. After the boat is at least partially inside of the string, this trigger is also neutralized, as when the zombies go down and leave the string's hitbox, it will not send out a block update anymore.
- Step 5
- When you're back at the bomb, finish the CBUD and wolf holding cell, by adding a tamed, sitting wolf on top of the trapdoor and connecting the redstone dust. Pearl into column 905 1226, until your feet are at the Y-coordinate 71. You should then be standing inside of a TNT block and a layer of carpet. From here, destroy the TNT block at the coordinates 903 70 1226, removing the fourth trigger. However, the CBUD will detect the TNT's collision box changing and activate its final trigger: the BUD'ed piston. Nevertheless, since this one takes a bit of time to ignite its TNT, we can still save ourselves at this point by keeping the pressure plate continuously pressed. This is what we needed the external CBUD and wolf holding cell for: as soon as the TNT block is broken, both CBUD's will detect it, however before the bomb's fifth trigger is finished, the external one drops a wolf, owned by the player, into the water, making it teleport to its owner. The wolf will try to find a good spot in a 5x1x5 box around the player's feet, eventually picking the pressure plate as it should be the first valid spot when the player stands in this particular spot. We have now finally disabled all triggers of the bomb's CBUD. We ender pearl our way out of the bomb.
- Step 6
- Now that the CBUD is effectively disabled, we're free to stack up and do other things with blocks in proximity to the bomb, giving us all the freedom we need to carefully disarm the rest of it. The bomb now still has several BUD'ed pistons, ready to activate TNT, as well as an Ender crystal which will explode under a few circumstances. Dealing with these last couple mechanisms is quite a tedious process, but shouldn't pose any significant challenges, which is why I'm showing it using creative and spectator mode. If you know perfectly what to do, everything could be done in survival mode as well. For the most part, disable the BUD'ed piston frame from the top-down by placing extra redstone blocks. There will be one piston on the east side which may look like an issue, however normally you can just break it without triggering anything. Finally, you should end up with two downward-pointing pistons which seem hard to power without updating them first. Yet, only the one pulling the redstone block can actually trigger TNT, so you can simply remove it while safely updating the other one. At this point, you should have neutralized the BUD'ed piston frame. To kill the zombies, you can use several methods, I simply burned them in lava. And finally, to get rid of the Ender crystal, you can use pistons.
- Your bomb should now be completely gone, without any explosions! I hope you liked some of the crazy ideas presented in this video, however I should give credit where credit is due. First of all, as stated earlier, this method was created together with JeWe, who also worked a ton on it. Secondly, the idea to teleport entities in using the Nether came frome Geosquare, another person who has worked on this challenge, though on a separate solution. Thirdly, I think it's also worth mentioning that the wolf teleporting method was inspired by a video by Sethbling from June 2011. So yeah, whenever you watch a technical Minecraft video, remember that no matter how weird the mechanics presented may seem, you may end up using it several years from now. Or at least, I thought that was quite funny. Anyway, all relevant links should be down in the description.
- Again, thanks for watching, and I hope I will see you, in another video.
Advertisement
Add Comment
Please, Sign In to add comment