API tools faq
paste
simhavcs

nx5_5.4.0-rc1

simhavcs
Oct 1st, 2019
51
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.47 KB | None | 0 0
raw download clone embed print report
  1. [19480] fastboot: getvar:slot-count
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.  
  21.  
  22.  
  23.  
  24.  
  25.  
  26.  
  27.  
  28.  
  29.  
  30.  
  31.  
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38. [19580] fastboot: getvar:slot-suffixes
  39. [19680] fastboot: download:0077f800
  40. downloading...
  41. [29020] fastboot: boot
  42. [29020] Found Appeneded Flattened Device tree
  43. [29030] DTB: not supported
  44. [29030] DTB: Use the first DTB (not found proper DTB)
  45. [29030] get_display_kcal = 0, 0, 0, x
  46. [29080] vibe
  47. [29180] splash: boot
  48. [29220] splash: unlocked
  49. [29260] cmdline: console=ttyMSM0,115200,n8 console=tty0 rootwait PMOS_NO_OUTPUT_REDIRECT uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.t
  50. [29290] Updating device tree: done
  51. [29290] booting linux @ 0x8000, ramdisk @ 0x2900000 (1757909), tags/device tree @ 0x2700000
  52. [29300] Turn off MIPI_CMD_PANEL.
  53. [29300] Continuous splash enabled, keeping panel alive.
  54. [ 0.000000] Booting Linux on physical CPU 0x0
  55. [ 0.000000] Linux version 5.4.0-rc1 (vinaysimha@vinaysimha-hpg6) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP PREEMPT9
  56. [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5787d
  57. [ 0.000000] CPU: div instructions available: patching division code
  58. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  59. [ 0.000000] OF: fdt: Machine model: LGE MSM 8974 HAMMERHEAD
  60. [ 0.000000] Memory policy: Data cache writealloc
  61. [ 0.000000] cma: Reserved 256 MiB at 0x20000000
  62. [ 0.000000] percpu: Embedded 19 pages/cpu s48140 r8192 d21492 u77824
  63. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 490240
  64. [ 0.000000] Kernel command line: console=ttyMSM0,115200,n8 console=tty0 rootwait PMOS_NO_OUTPUT_REDIRECT uart_console=enable gpt=enable lg1
  65. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  66. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  67. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  68. [ 0.000000] Memory: 1671680K/1967104K available (8192K kernel code, 832K rwdata, 3468K rodata, 1024K init, 266K bss, 33280K reserved, 2621)
  69. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  70. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  71. [ 0.000000] Tasks RCU enabled.
  72. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  73. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  74. [ 0.000000] random: get_random_bytes called from start_kernel+0x31c/0x4b8 with crng_init=0
  75. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  76. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  77. [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  78. [ 0.000016] Switching to timer-based delay loop, resolution 52ns
  79. [ 0.000401] Console: colour dummy device 80x30
  80. [ 0.000784] printk: console [tty0] enabled
  81. [ 0.000821] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  82. [ 0.000852] pid_max: default: 32768 minimum: 301
  83. [ 0.000994] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  84. [ 0.001024] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  85. [ 0.001624] CPU: Testing write buffer coherency: ok
  86. [ 0.001897] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  87. [ 0.059961] Setting up static identity map for 0x300000 - 0x300060
  88. [ 0.079960] rcu: Hierarchical SRCU implementation.
  89. [ 0.120036] smp: Bringing up secondary CPUs ...
  90. [ 0.200461] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  91. [ 0.280621] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  92. [ 0.360785] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  93. [ 0.360997] smp: Brought up 1 node, 4 CPUs
  94. [ 0.361057] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  95. [ 0.361077] CPU: All CPU(s) started in SVC mode.
  96. [ 0.361578] devtmpfs: initialized
  97. [ 0.370865] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
  98. [ 0.371236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  99. [ 0.371275] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  100. [ 0.381273] pinctrl core: initialized pinctrl subsystem
  101. [ 0.382353] NET: Registered protocol family 16
  102. [ 0.384167] DMA: preallocated 256 KiB pool for atomic coherent allocations
  103. [ 0.385336] cpuidle: using governor menu
  104. [ 0.385950] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  105. [ 0.385978] hw-breakpoint: maximum watchpoint size is 8 bytes.
  106. [ 0.422129] iommu: Default domain type: Translated
  107. [ 0.422419] vgaarb: loaded
  108. [ 0.422931] SCSI subsystem initialized
  109. [ 0.431036] usbcore: registered new interface driver usbfs
  110. [ 0.431110] usbcore: registered new interface driver hub
  111. [ 0.431190] usbcore: registered new device driver usb
  112. [ 0.432157] Advanced Linux Sound Architecture Driver Initialized.
  113. [ 0.433217] clocksource: Switched to clocksource arch_sys_counter
  114. [ 0.871894] thermal_sys: Registered thermal governor 'step_wise'
  115. [ 0.872649] NET: Registered protocol family 2
  116. [ 0.873128] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  117. [ 0.873170] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  118. [ 0.873276] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  119. [ 0.873368] TCP: Hash tables configured (established 8192 bind 8192)
  120. [ 0.873468] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  121. [ 0.873508] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  122. [ 0.873680] NET: Registered protocol family 1
  123. [ 0.874254] RPC: Registered named UNIX socket transport module.
  124. [ 0.874277] RPC: Registered udp transport module.
  125. [ 0.874295] RPC: Registered tcp transport module.
  126. [ 0.874313] RPC: Registered tcp NFSv4.1 backchannel transport module.
  127. [ 0.874338] PCI: CLS 0 bytes, default 64
  128. [ 0.874608] Trying to unpack rootfs image as initramfs...
  129. [ 0.954956] Freeing initrd memory: 1720K
  130. [ 0.955769] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
  131. [ 0.957476] Initialise system trusted keyrings
  132. [ 0.957680] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  133. [ 0.964354] NFS: Registering the id_resolver key type
  134. [ 0.964391] Key type id_resolver registered
  135. [ 0.964411] Key type id_legacy registered
  136. [ 0.965245] Key type cifs.idmap registered
  137. [ 0.965272] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  138. [ 0.965585] fuse: init (API version 7.31)
  139. [ 0.997683] Key type asymmetric registered
  140. [ 0.997705] Asymmetric key parser 'x509' registered
  141. [ 0.997769] bounce: pool size: 64 pages
  142. [ 0.997821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  143. [ 0.997848] io scheduler mq-deadline registered
  144. [ 0.997867] io scheduler kyber registered
  145. [ 1.020261] msm_serial f991d000.serial: msm_serial: detected port #0
  146. [ 1.020316] msm_serial f991d000.serial: uartclk = 7372800
  147. [ 1.020377] f991d000.serial: ttyMSM0 at MMIO 0xf991d000 (irq = 27, base_baud = 460800) is a MSM
  148. [ 1.020422] msm_serial: console setup on port #0
  149. [ 1.615186] printk: console [ttyMSM0] enabled
  150. [ 1.620302] msm_serial: driver initialized
  151. [ 1.635644] brd: module loaded
  152. [ 1.645772] loop: module loaded
  153. [ 1.646315] SCSI Media Changer driver v0.25
  154. [ 1.648740] spmi spmi-0: PMIC arbiter version v1 (0x20000002)
  155. [ 1.660323] GPIO line 360 (otg-gpio) hogged as output/high
  156. [ 1.664959] s1: supplied by regulator-dummy
  157. [ 1.665306] s2: supplied by regulator-dummy
  158. [ 1.669086] s3: supplied by regulator-dummy
  159. [ 1.673352] s4: Bringing 5100000uV into 5000000-5000000uV
  160. [ 1.677390] l1: supplied by regulator-dummy
  161. [ 1.682980] l2: supplied by regulator-dummy
  162. [ 1.687040] l3: supplied by regulator-dummy
  163. [ 1.691143] l4: supplied by regulator-dummy
  164. [ 1.695343] l5: supplied by regulator-dummy
  165. [ 1.699487] l6: supplied by regulator-dummy
  166. [ 1.703681] l7: supplied by regulator-dummy
  167. [ 1.707823] l8: supplied by regulator-dummy
  168. [ 1.711988] l9: supplied by regulator-dummy
  169. [ 1.716193] l10: supplied by regulator-dummy
  170. [ 1.720326] l11: supplied by regulator-dummy
  171. [ 1.724877] l12: supplied by regulator-dummy
  172. [ 1.729099] l13: supplied by regulator-dummy
  173. [ 1.733378] l14: supplied by regulator-dummy
  174. [ 1.737606] l15: supplied by regulator-dummy
  175. [ 1.741866] l16: supplied by regulator-dummy
  176. [ 1.746155] l17: supplied by regulator-dummy
  177. [ 1.750373] l18: supplied by regulator-dummy
  178. [ 1.754661] l19: supplied by regulator-dummy
  179. [ 1.758886] l20: supplied by regulator-dummy
  180. [ 1.763148] l21: supplied by regulator-dummy
  181. [ 1.767423] l22: supplied by regulator-dummy
  182. [ 1.771650] l23: supplied by regulator-dummy
  183. [ 1.775938] l24: supplied by regulator-dummy
  184. [ 1.780159] lvs1: supplied by regulator-dummy
  185. [ 1.784390] lvs2: supplied by regulator-dummy
  186. [ 1.788602] lvs3: supplied by regulator-dummy
  187. [ 1.793109] 5vs1: supplied by s4
  188. [ 1.797378] 5vs2: supplied by s4
  189. [ 1.801601] libphy: Fixed MDIO Bus: probed
  190. [ 1.803777] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  191. [ 1.807416] CSLIP: code copyright 1989 Regents of the University of California.
  192. [ 1.817140] usbcore: registered new interface driver ax88179_178a
  193. [ 1.824320] usbcore: registered new interface driver cdc_ether
  194. [ 1.830546] usbcore: registered new interface driver net1080
  195. [ 1.836295] usbcore: registered new interface driver cdc_subset
  196. [ 1.842104] usbcore: registered new interface driver cdc_ncm
  197. [ 1.847912] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  198. [ 1.853630] ehci-pci: EHCI PCI platform driver
  199. [ 1.860012] usbcore: registered new interface driver cdc_acm
  200. [ 1.864379] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  201. [ 1.885490] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: registered as rtc0
  202. [ 1.885699] i2c /dev entries driver
  203. [ 1.891527] i2c_qup f9923000.i2c:
  204. [ 1.891527] tx channel not available
  205. [ 1.895435] i2c_qup f9924000.i2c:
  206. [ 1.895435] tx channel not available
  207. [ 1.902669] i2c_qup f9925000.i2c:
  208. [ 1.902669] tx channel not available
  209. [ 1.916714] lm3630a_bl 3-0038: LM3630A backlight register OK.
  210. [ 1.917013] i2c_qup f9968000.i2c:
  211. [ 1.917013] tx channel not available
  212. [ 1.922802] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Initializing SMBB rev 3
  213. [ 1.932703] otg-vbus: supplied by 5vs1
  214. [ 1.937406] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  215. [ 1.940073] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  216. [ 1.947403] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  217. [ 1.954538] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  218. [ 1.962193] sdhci: Secure Digital Host Controller Interface driver
  219. [ 1.968972] sdhci: Copyright(c) Pierre Ossman
  220. [ 1.975225] sdhci-pltfm: SDHCI platform and OF driver helper
  221. [ 1.981991] usbcore: registered new interface driver usbhid
  222. [ 1.985402] usbhid: USB HID core driver
  223. [ 1.993719] oprofile: using timer interrupt.
  224. [ 1.994692] NET: Registered protocol family 17
  225. [ 1.999056] Key type dns_resolver registered
  226. [ 2.003603] Registering SWP/SWPB emulation handler
  227. [ 2.007893] Loading compiled-in X.509 certificates
  228. [ 2.078917] s1: supplied by regulator-dummy
  229. [ 2.079021] s1: Bringing 0uV into 675000-675000uV
  230. [ 2.082194] s2: supplied by regulator-dummy
  231. [ 2.087380] s2: Bringing 0uV into 500000-500000uV
  232. [ 2.092804] s3: supplied by regulator-dummy
  233. [ 2.095706] s3: Bringing 0uV into 1050000-1050000uV
  234. [ 2.099889] s4: supplied by regulator-dummy
  235. [ 2.104752] s4: Bringing 0uV into 815000-815000uV
  236. [ 2.109117] s5: supplied by regulator-dummy
  237. [ 2.113947] s6: supplied by regulator-dummy
  238. [ 2.117820] s7: supplied by regulator-dummy
  239. [ 2.121988] s8: supplied by regulator-dummy
  240. [ 2.126775] s1: supplied by regulator-dummy
  241. [ 2.130107] s1: Bringing 0uV into 1300000-1300000uV
  242. [ 2.134732] s2: supplied by regulator-dummy
  243. [ 2.139088] s2: Bringing 0uV into 2150000-2150000uV
  244. [ 2.143680] s3: supplied by regulator-dummy
  245. [ 2.148111] s3: Bringing 0uV into 1800000-1800000uV
  246. [ 2.148196] gpio gpiochip2: (fc4cf000.spmi:pm8941@0:gpios@c000): allocate IRQ 77, hwirq 1
  247. [ 2.152861] l1: supplied by s1
  248. [ 2.157166] gpio gpiochip2: (fc4cf000.spmi:pm8941@0:gpios@c000): found parent hwirq 193
  249. [ 2.165502] l1: Bringing 0uV into 1225000-1225000uV
  250. [ 2.168383] gpio gpiochip2: (fc4cf000.spmi:pm8941@0:gpios@c000): alloc_irqs_parent for 77 parent hwirq 193
  251. [ 2.176688] l2: supplied by s3
  252. [ 2.181385] gpio gpiochip2: (fc4cf000.spmi:pm8941@0:gpios@c000): allocate IRQ 78, hwirq 2
  253. [ 2.190940] l2: Bringing 0uV into 1200000-1200000uV
  254. [ 2.193934] gpio gpiochip2: (fc4cf000.spmi:pm8941@0:gpios@c000): found parent hwirq 194
  255. [ 2.193946] gpio gpiochip2: (fc4cf000.spmi:pm8941@0:gpios@c000): alloc_irqs_parent for 78 parent hwirq 194
  256. [ 2.202408] l3: supplied by s1
  257. [ 2.207124] input: soc:gpio-keys as /devices/platform/soc/soc:gpio-keys/input/input0
  258. [ 2.214895] l3: Bringing 0uV into 1225000-1225000uV
  259. [ 2.235491] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: setting system clock to 1970-01-22T14:50:00 UTC (1867800)
  260. [ 2.236279] ALSA device list:
  261. [ 2.240439] l4: supplied by s1
  262. [ 2.251470] No soundcards found.
  263. [ 2.253528] l4: Bringing 0uV into 1225000-1225000uV
  264. [ 2.260286] l5: supplied by s2
  265. [ 2.261118] Freeing unused kernel memory: 1024K
  266. [ 2.264640] l5: Bringing 0uV into 1800000-1800000uV
  267. [ 2.272447] l6: supplied by s2
  268. [ 2.277069] l6: Bringing 0uV into 1800000-1800000uV
  269. [ 2.280602] l7: supplied by s2
  270. [ 2.284993] l7: Bringing 0uV into 1800000-1800000uV
  271. [ 2.288381] l8: supplied by vph-pwr
  272. [ 2.292822] l8: Bringing 0uV into 1800000-1800000uV
  273. [ 2.296549] l9: supplied by vreg-boost
  274. [ 2.301153] l9: Bringing 0uV into 1800000-1800000uV
  275. [ 2.305022] Run /init as init process
  276. [ 2.305309] l10: supplied by vreg-boost
  277. [ 2.313371] mmc0: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using ADMA
  278. [ 2.313594] l10: Bringing 0uV into 1800000-1800000uV
  279. [ 2.325343] l11: supplied by s1
  280. [ 2.329949] l11: Bringing 0uV into 1300000-1300000uV
  281. [ 2.333069] l12: supplied by s2
  282. [ 2.338064] l12: Bringing 0uV into 1800000-1800000uV
  283. [ 2.341215] l13: supplied by vreg-boost
  284. [ 2.346019] l13: Bringing 0uV into 1800000-1800000uV
  285. [ 2.350008] l14: supplied by s2
  286. [ 2.354755] l14: Bringing 0uV into 1800000-1800000uV
  287. [ 2.357839] l15: supplied by s2
  288. [ 2.362827] l15: Bringing 0uV into 2050000-2050000uV
  289. [ 2.366029] l16: supplied by vph-pwr
  290. [ 2.370873] l16: Bringing 0uV into 2700000-2700000uV
  291. [ 2.371229] l17: supplied by vreg-boost
  292. [ 2.379380] l17: Bringing 0uV into 2850000-2850000uV
  293. [ 2.379733] l18: supplied by vph-pwr
  294. [ 2.388168] l18: Bringing 0uV into 2850000-2850000uV
  295. [ 2.388452] l19: supplied by vph-pwr
  296. [ 2.396673] l19: Bringing 0uV into 3000000-3000000uV
  297. [ 2.397019] l20: supplied by vreg-boost
  298. [ 2.405193] l20: Bringing 0uV into 2950000-2950000uV
  299. [ 2.405697] l21: supplied by vreg-boost
  300. [ 2.413959] l21: Bringing 0uV into 2950000-2950000uV
  301. [ 2.414453] l22: supplied by vreg-boost
  302. [ 2.422701] l22: Bringing 0uV into 3000000-3000000uV
  303. [ 2.423059] l23: supplied by vreg-boost
  304. [ 2.431466] l23: Bringing 0uV into 3000000-3000000uV
  305. [ 2.431832] l24: supplied by vreg-boost
  306. [ 2.440228] l24: Bringing 0uV into 3075000-3075000uV
  307. [ 2.440759] lvs1: supplied by s3
  308. [ 2.449321] lvs2: supplied by s3
  309. [ 2.452619] lvs3: supplied by s3
  310. [ 2.456293] 5vs1: supplied by regulator-dummy
  311. [ 2.459518] 5vs2: supplied by regulator-dummy
  312. [ 2.464170] random: fast init done
  313. [ 2.474724] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  314. [ 2.505959] mmc1: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA
  315. [ 2.580317] mmc1: new HS200 MMC card at address 0001
  316. [ 2.581006] mmcblk1: mmc1:0001 SEM32G 29.1 GiB
  317. [ 2.584551] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
  318. [ 2.588772] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
  319. [ 2.594851] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  320. [ 2.603916] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!