Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] microcode: microcode updated early to revision 0x84, date = 2018-01-21
- [ 0.000000] Linux version 4.17.2-1-ARCH (builduser@heftig-9574) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sat Jun 16 11:08:59 UTC 2018
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=981f35b3-a805-4666-9e8d-d3620578c005 rw quiet resume=UUID=05ae26cf-fb5f-432c-b925-bc1e16bdb257
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
- [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
- [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000084511fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000084512000-0x0000000084512fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000084513000-0x0000000084513fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000084514000-0x0000000089ac8fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000089ac9000-0x000000008a976fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008a977000-0x000000008a9c1fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000008a9c2000-0x000000008ae18fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000008ae19000-0x000000008b2abfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008b2ac000-0x000000008b37efff] type 20
- [ 0.000000] BIOS-e820: [mem 0x000000008b37f000-0x000000008b3fefff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008b3ff000-0x000000008fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] efi: EFI v2.60 by American Megatrends
- [ 0.000000] efi: ACPI 2.0=0x8a986000 ACPI=0x8a986000 SMBIOS=0x8b20c000 SMBIOS 3.0=0x8b20b000 ESRT=0x8842ce18 MEMATTR=0x87c42018
- [ 0.000000] SMBIOS 3.0.0 present.
- [ 0.000000] DMI: ASUSTeK COMPUTER INC. X542URR/X542URR, BIOS X542URR.301 09/29/2017
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: write-back
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
- [ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
- [ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
- [ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable
- [ 0.000000] 4 base 008B800000 mask 7FFF800000 uncachable
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.000000] e820: last_pfn = 0x8b3ff max_arch_pfn = 0x400000000
- [ 0.000000] esrt: Reserving ESRT space from 0x000000008842ce18 to 0x000000008842ce50.
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x14c660000, 0x14c660fff] PGTABLE
- [ 0.000000] BRK [0x14c661000, 0x14c661fff] PGTABLE
- [ 0.000000] BRK [0x14c662000, 0x14c662fff] PGTABLE
- [ 0.000000] BRK [0x14c663000, 0x14c663fff] PGTABLE
- [ 0.000000] BRK [0x14c664000, 0x14c664fff] PGTABLE
- [ 0.000000] BRK [0x14c665000, 0x14c665fff] PGTABLE
- [ 0.000000] BRK [0x14c666000, 0x14c666fff] PGTABLE
- [ 0.000000] BRK [0x14c667000, 0x14c667fff] PGTABLE
- [ 0.000000] BRK [0x14c668000, 0x14c668fff] PGTABLE
- [ 0.000000] Secure boot could not be determined
- [ 0.000000] RAMDISK: [mem 0x36e55000-0x37721fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x000000008A986000 000024 (v02 _ASUS_)
- [ 0.000000] ACPI: XSDT 0x000000008A9860B8 0000EC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 0x000000008A9B1D88 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 0x000000008A986230 02BB51 (v02 _ASUS_ Notebook 01072009 INTL 20160422)
- [ 0.000000] ACPI: FACS 0x000000008ADE7F00 000040
- [ 0.000000] ACPI: APIC 0x000000008A9B1EA0 0000BC (v03 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: FPDT 0x000000008A9B1F60 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: FIDT 0x000000008A9B1FA8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: ECDT 0x000000008A9B2048 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
- [ 0.000000] ACPI: MCFG 0x000000008A9B2110 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 0x000000008A9B2150 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
- [ 0.000000] ACPI: SSDT 0x000000008A9B24B0 00773E (v02 DptfTa DptfTabl 00001000 INTL 20160422)
- [ 0.000000] ACPI: SSDT 0x000000008A9B9BF0 003147 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
- [ 0.000000] ACPI: HPET 0x000000008A9BCD38 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
- [ 0.000000] ACPI: UEFI 0x000000008A9BCD70 000042 (v01 _ASUS_ Notebook 00000002 01000013)
- [ 0.000000] ACPI: SSDT 0x000000008A9BCDB8 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
- [ 0.000000] ACPI: LPIT 0x000000008A9BE568 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
- [ 0.000000] ACPI: SSDT 0x000000008A9BE600 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
- [ 0.000000] ACPI: SSDT 0x000000008A9BE748 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
- [ 0.000000] ACPI: SSDT 0x000000008A9BE9E8 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
- [ 0.000000] ACPI: DBGP 0x000000008A9BEF00 000034 (v01 INTEL 00000002 MSFT 0000005F)
- [ 0.000000] ACPI: DBG2 0x000000008A9BEF38 000054 (v00 INTEL 00000002 MSFT 0000005F)
- [ 0.000000] ACPI: SSDT 0x000000008A9BEF90 000829 (v02 SgRef SgPch 00001000 INTL 20160422)
- [ 0.000000] ACPI: SSDT 0x000000008A9BF7C0 00039B (v02 SgRef SgUlx 00001000 INTL 20160422)
- [ 0.000000] ACPI: DMAR 0x000000008A9BFB60 000138 (v01 INTEL KBL 00000001 INTL 00000001)
- [ 0.000000] ACPI: BGRT 0x000000008A9BFC98 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: TPM2 0x000000008A9BFCD0 000034 (v03 _ASUS_ Notebook 00000001 AMI 00000000)
- [ 0.000000] ACPI: SSDT 0x000000008A9BFD08 001F33 (v01 OptRef OptTabl 00001000 INTL 20160422)
- [ 0.000000] ACPI: WSMT 0x000000008A9C1C40 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x26effc000-0x26effffff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000026effffff]
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
- [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000084511fff]
- [ 0.000000] node 0: [mem 0x0000000084514000-0x0000000089ac8fff]
- [ 0.000000] node 0: [mem 0x000000008b37f000-0x000000008b3fefff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000026effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
- [ 0.000000] On node 0 totalpages: 2067171
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 23 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 8750 pages used for memmap
- [ 0.000000] DMA32 zone: 559943 pages, LIFO batch:31
- [ 0.000000] Normal zone: 23488 pages used for memmap
- [ 0.000000] Normal zone: 1503232 pages, LIFO batch:31
- [ 0.000000] Reserved but unavailable: 98 pages
- [ 0.000000] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x84512000-0x84512fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x84513000-0x84513fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x89ac9000-0x8a976fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x8a977000-0x8a9c1fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x8a9c2000-0x8ae18fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x8ae19000-0x8b2abfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x8b2ac000-0x8b37efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x8b3ff000-0x8fffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
- [ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
- [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
- [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2034846
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=981f35b3-a805-4666-9e8d-d3620578c005 rw quiet resume=UUID=05ae26cf-fb5f-432c-b925-bc1e16bdb257
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 7995732K/8268684K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 272952K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Kernel/User page tables isolation: enabled
- [ 0.000000] ftrace: allocating 32647 entries in 128 pages
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
- [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
- [ 0.000000] Offload RCU callbacks from CPUs: (none).
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] ACPI: Core revision 20180313
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
- [ 0.000000] hpet clockevent registered
- [ 0.003333] APIC: Switch to symmetric I/O mode setup
- [ 0.003333] DMAR: Host address width 39
- [ 0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
- [ 0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
- [ 0.003333] DMAR: RMRR base: 0x0000008a0df000 end: 0x0000008a0fefff
- [ 0.003333] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
- [ 0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
- [ 0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
- [ 0.003333] DMAR: ANDD device: 7 name: \_SB.PCI0.SPI0
- [ 0.003333] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
- [ 0.003333] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
- [ 0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
- [ 0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
- [ 0.003333] x2apic enabled
- [ 0.003333] Switched APIC routing to cluster x2apic.
- [ 0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.023333] tsc: Detected 2000.000 MHz processor
- [ 0.023333] tsc: Detected 1992.000 MHz TSC
- [ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
- [ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3985.00 BogoMIPS (lpj=6640000)
- [ 0.023333] pid_max: default: 32768 minimum: 301
- [ 0.023333] Security Framework initialized
- [ 0.023333] Yama: becoming mindful.
- [ 0.023333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.026918] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.026957] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.026984] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.027249] CPU: Physical Processor ID: 0
- [ 0.027249] CPU: Processor Core ID: 0
- [ 0.027256] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.027257] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.027264] mce: CPU supports 10 MCE banks
- [ 0.027278] CPU0: Thermal monitoring enabled (TM1)
- [ 0.027307] process: using mwait in idle threads
- [ 0.027310] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
- [ 0.027311] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.027313] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.027314] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
- [ 0.027315] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
- [ 0.027316] Spectre V2 : Enabling Restricted Speculation for firmware calls
- [ 0.027316] Speculative Store Bypass: Vulnerable
- [ 0.032886] Freeing SMP alternatives memory: 28K
- [ 0.035950] TSC deadline timer enabled
- [ 0.035954] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
- [ 0.050035] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
- [ 0.050105] ... version: 4
- [ 0.050106] ... bit width: 48
- [ 0.050107] ... generic registers: 4
- [ 0.050108] ... value mask: 0000ffffffffffff
- [ 0.050109] ... max period: 00007fffffffffff
- [ 0.050110] ... fixed-purpose events: 3
- [ 0.050110] ... event mask: 000000070000000f
- [ 0.053366] Hierarchical SRCU implementation.
- [ 0.063715] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.066732] smp: Bringing up secondary CPUs ...
- [ 0.090074] x86: Booting SMP configuration:
- [ 0.090076] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
- [ 0.234020] smp: Brought up 1 node, 8 CPUs
- [ 0.234020] smpboot: Max logical packages: 1
- [ 0.234020] smpboot: Total of 8 processors activated (31884.00 BogoMIPS)
- [ 0.237074] devtmpfs: initialized
- [ 0.237074] x86/mm: Memory block size: 128MB
- [ 0.237573] PM: Registering ACPI NVS region [mem 0x84512000-0x84512fff] (4096 bytes)
- [ 0.237573] PM: Registering ACPI NVS region [mem 0x8a9c2000-0x8ae18fff] (4550656 bytes)
- [ 0.237573] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.237573] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.237573] pinctrl core: initialized pinctrl subsystem
- [ 0.237573] RTC time: 13:02:23, date: 06/30/18
- [ 0.237573] NET: Registered protocol family 16
- [ 0.237573] cpuidle: using governor ladder
- [ 0.237573] cpuidle: using governor menu
- [ 0.237573] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.237573] ACPI: bus type PCI registered
- [ 0.237573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.237573] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
- [ 0.237573] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
- [ 0.237573] PCI: Using configuration type 1 for base access
- [ 0.240689] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.240689] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.240689] ACPI: Added _OSI(Module Device)
- [ 0.240689] ACPI: Added _OSI(Processor Device)
- [ 0.240689] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.240689] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.240689] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.240689] ACPI: EC: EC started
- [ 0.240689] ACPI: EC: interrupt blocked
- [ 0.240689] ACPI: \: Used as first EC
- [ 0.240689] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.240689] ACPI: \: Used as boot ECDT EC to handle transactions
- [ 0.313804] ACPI: 11 ACPI AML tables successfully acquired and loaded
- [ 0.337216] ACPI: Dynamic OEM Table Load:
- [ 0.337225] ACPI: SSDT 0xFFFF95E064EA9800 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
- [ 0.338183] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
- [ 0.340778] ACPI: Dynamic OEM Table Load:
- [ 0.340786] ACPI: SSDT 0xFFFF95E064A77000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
- [ 0.341641] ACPI: Dynamic OEM Table Load:
- [ 0.341647] ACPI: SSDT 0xFFFF95E064BCE3C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
- [ 0.342382] ACPI: Dynamic OEM Table Load:
- [ 0.342389] ACPI: SSDT 0xFFFF95E064EAC800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
- [ 0.343782] ACPI: Dynamic OEM Table Load:
- [ 0.343792] ACPI: SSDT 0xFFFF95E064A79000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
- [ 0.345816] ACPI: Dynamic OEM Table Load:
- [ 0.345822] ACPI: SSDT 0xFFFF95E064A75000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
- [ 0.346720] ACPI: Dynamic OEM Table Load:
- [ 0.346726] ACPI: SSDT 0xFFFF95E064A74C00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
- [ 0.352709] ACPI: Interpreter enabled
- [ 0.352775] ACPI: (supports S0 S3 S4 S5)
- [ 0.352776] ACPI: Using IOAPIC for interrupt routing
- [ 0.352836] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.354691] ACPI: Enabled 7 GPEs in block 00 to 7F
- [ 0.362668] ACPI: Power Resource [WRST] (on)
- [ 0.362956] ACPI: Power Resource [WRST] (on)
- [ 0.363243] ACPI: Power Resource [WRST] (on)
- [ 0.363541] ACPI: Power Resource [WRST] (on)
- [ 0.363827] ACPI: Power Resource [WRST] (on)
- [ 0.363920] ACPI: Power Resource [PC01] (on)
- [ 0.365731] ACPI: Power Resource [WRST] (on)
- [ 0.366020] ACPI: Power Resource [WRST] (on)
- [ 0.366304] ACPI: Power Resource [WRST] (on)
- [ 0.366951] ACPI: Power Resource [WRST] (on)
- [ 0.367838] ACPI: Power Resource [WRST] (on)
- [ 0.368123] ACPI: Power Resource [WRST] (on)
- [ 0.368410] ACPI: Power Resource [WRST] (on)
- [ 0.368701] ACPI: Power Resource [WRST] (on)
- [ 0.368984] ACPI: Power Resource [WRST] (on)
- [ 0.369269] ACPI: Power Resource [WRST] (on)
- [ 0.369554] ACPI: Power Resource [WRST] (on)
- [ 0.370234] ACPI: Power Resource [WRST] (on)
- [ 0.370518] ACPI: Power Resource [WRST] (on)
- [ 0.370803] ACPI: Power Resource [WRST] (on)
- [ 0.395210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
- [ 0.395219] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.397750] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.397752] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 0.398969] PCI host bridge to bus 0000:00
- [ 0.398972] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.398974] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.398976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.398978] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
- [ 0.398980] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
- [ 0.398982] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
- [ 0.398983] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
- [ 0.398985] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
- [ 0.398987] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
- [ 0.398989] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
- [ 0.398990] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
- [ 0.398992] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
- [ 0.398994] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
- [ 0.398996] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
- [ 0.398997] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
- [ 0.398999] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
- [ 0.399001] pci_bus 0000:00: root bus resource [mem 0x90000000-0xefffffff window]
- [ 0.399003] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
- [ 0.399005] pci_bus 0000:00: root bus resource [bus 00-7e]
- [ 0.399017] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
- [ 0.399642] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
- [ 0.399659] pci 0000:00:02.0: reg 0x10: [mem 0xed000000-0xedffffff 64bit]
- [ 0.399668] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.399675] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 0.399699] pci 0000:00:02.0: BAR 2: assigned to efifb
- [ 0.399950] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
- [ 0.399968] pci 0000:00:04.0: reg 0x10: [mem 0xef520000-0xef527fff 64bit]
- [ 0.400335] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
- [ 0.400364] pci 0000:00:14.0: reg 0x10: [mem 0xef510000-0xef51ffff 64bit]
- [ 0.400453] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.400842] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
- [ 0.400870] pci 0000:00:14.2: reg 0x10: [mem 0xef53a000-0xef53afff 64bit]
- [ 0.401245] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
- [ 0.401508] pci 0000:00:15.0: reg 0x10: [mem 0xef539000-0xef539fff 64bit]
- [ 0.402670] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
- [ 0.402934] pci 0000:00:15.1: reg 0x10: [mem 0xef538000-0xef538fff 64bit]
- [ 0.404031] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
- [ 0.404064] pci 0000:00:16.0: reg 0x10: [mem 0xef537000-0xef537fff 64bit]
- [ 0.404157] pci 0000:00:16.0: PME# supported from D3hot
- [ 0.404505] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
- [ 0.404530] pci 0000:00:17.0: reg 0x10: [mem 0xef530000-0xef531fff]
- [ 0.404540] pci 0000:00:17.0: reg 0x14: [mem 0xef536000-0xef5360ff]
- [ 0.404550] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
- [ 0.404560] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
- [ 0.404570] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
- [ 0.404580] pci 0000:00:17.0: reg 0x24: [mem 0xef535000-0xef5357ff]
- [ 0.404637] pci 0000:00:17.0: PME# supported from D3hot
- [ 0.404922] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
- [ 0.405019] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.405368] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
- [ 0.405464] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.405793] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
- [ 0.405889] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.406310] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
- [ 0.406574] pci 0000:00:1e.0: reg 0x10: [mem 0xef534000-0xef534fff 64bit]
- [ 0.407742] pci 0000:00:1e.2: [8086:9d29] type 00 class 0x118000
- [ 0.408005] pci 0000:00:1e.2: reg 0x10: [mem 0xef533000-0xef533fff 64bit]
- [ 0.409103] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
- [ 0.409484] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
- [ 0.409502] pci 0000:00:1f.2: reg 0x10: [mem 0xef52c000-0xef52ffff]
- [ 0.409806] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
- [ 0.409838] pci 0000:00:1f.3: reg 0x10: [mem 0xef528000-0xef52bfff 64bit]
- [ 0.409869] pci 0000:00:1f.3: reg 0x20: [mem 0xef500000-0xef50ffff 64bit]
- [ 0.409931] pci 0000:00:1f.3: PME# supported from D3hot D3cold
- [ 0.410381] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
- [ 0.410443] pci 0000:00:1f.4: reg 0x10: [mem 0xef532000-0xef5320ff 64bit]
- [ 0.410515] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
- [ 0.410925] pci 0000:01:00.0: [10de:134e] type 00 class 0x030200
- [ 0.410955] pci 0000:01:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
- [ 0.410971] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.410990] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
- [ 0.411001] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
- [ 0.411012] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
- [ 0.411297] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.411302] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
- [ 0.411306] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xef0fffff]
- [ 0.411311] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
- [ 0.411414] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.411450] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
- [ 0.411482] pci 0000:02:00.0: reg 0x18: [mem 0xef404000-0xef404fff 64bit]
- [ 0.411502] pci 0000:02:00.0: reg 0x20: [mem 0xef400000-0xef403fff 64bit]
- [ 0.411621] pci 0000:02:00.0: supports D1 D2
- [ 0.411623] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.411866] pci 0000:00:1c.4: PCI bridge to [bus 02]
- [ 0.411870] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
- [ 0.411873] pci 0000:00:1c.4: bridge window [mem 0xef400000-0xef4fffff]
- [ 0.412120] pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
- [ 0.412425] pci 0000:03:00.0: reg 0x10: [mem 0xef200000-0xef3fffff 64bit]
- [ 0.413261] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 0.414082] pci 0000:00:1c.5: PCI bridge to [bus 03]
- [ 0.414088] pci 0000:00:1c.5: bridge window [mem 0xef200000-0xef3fffff]
- [ 0.418307] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.418404] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.418498] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.418590] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.418684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.418776] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.418869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.418961] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.420791] ACPI: EC: interrupt unblocked
- [ 0.420810] ACPI: EC: event unblocked
- [ 0.420825] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.420827] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
- [ 0.420918] pci 0000:00:02.0: vgaarb: setting as boot VGA device
- [ 0.420918] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.420918] pci 0000:00:02.0: vgaarb: bridge control possible
- [ 0.420918] vgaarb: loaded
- [ 0.420918] pps_core: LinuxPPS API ver. 1 registered
- [ 0.420918] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
- [ 0.420918] PTP clock support registered
- [ 0.420918] EDAC MC: Ver: 3.0.0
- [ 0.420918] Registered efivars operations
- [ 0.441545] PCI: Using ACPI for IRQ routing
- [ 0.455689] PCI: pci_cache_line_size set to 64 bytes
- [ 0.456059] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
- [ 0.456061] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
- [ 0.456062] e820: reserve RAM buffer [mem 0x84512000-0x87ffffff]
- [ 0.456063] e820: reserve RAM buffer [mem 0x89ac9000-0x8bffffff]
- [ 0.456065] e820: reserve RAM buffer [mem 0x8b3ff000-0x8bffffff]
- [ 0.456066] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
- [ 0.456173] NetLabel: Initializing
- [ 0.456174] NetLabel: domain hash size = 128
- [ 0.456175] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.456191] NetLabel: unlabeled traffic allowed by default
- [ 0.456720] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.456728] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
- [ 0.460001] clocksource: Switched to clocksource tsc-early
- [ 0.473491] VFS: Disk quotas dquot_6.6.0
- [ 0.473510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.473581] pnp: PnP ACPI init
- [ 0.473986] system 00:00: [io 0x0680-0x069f] has been reserved
- [ 0.473988] system 00:00: [io 0xffff] has been reserved
- [ 0.473991] system 00:00: [io 0xffff] has been reserved
- [ 0.473994] system 00:00: [io 0xffff] has been reserved
- [ 0.473996] system 00:00: [io 0x1800-0x18fe] has been reserved
- [ 0.473998] system 00:00: [io 0x164e-0x164f] has been reserved
- [ 0.474005] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.474173] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.474232] system 00:02: [io 0x1854-0x1857] has been reserved
- [ 0.474237] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.474508] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
- [ 0.474920] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.474922] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.474924] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.474927] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
- [ 0.474929] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.474931] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 0.474933] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.474936] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.474938] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.474940] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
- [ 0.474945] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.475009] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
- [ 0.475011] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
- [ 0.475013] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
- [ 0.475015] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
- [ 0.475018] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
- [ 0.475020] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
- [ 0.475022] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
- [ 0.475026] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.475565] system 00:06: [io 0xff00-0xfffe] has been reserved
- [ 0.475570] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.477650] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
- [ 0.477653] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
- [ 0.477657] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.479641] pnp: PnP ACPI: found 8 devices
- [ 0.485694] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.485724] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.485728] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
- [ 0.485733] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xef0fffff]
- [ 0.485737] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
- [ 0.485743] pci 0000:00:1c.4: PCI bridge to [bus 02]
- [ 0.485745] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
- [ 0.485750] pci 0000:00:1c.4: bridge window [mem 0xef400000-0xef4fffff]
- [ 0.485758] pci 0000:00:1c.5: PCI bridge to [bus 03]
- [ 0.485763] pci 0000:00:1c.5: bridge window [mem 0xef200000-0xef3fffff]
- [ 0.485772] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.485774] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.485776] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.485778] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
- [ 0.485780] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
- [ 0.485782] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
- [ 0.485784] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
- [ 0.485785] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
- [ 0.485787] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
- [ 0.485789] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
- [ 0.485791] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
- [ 0.485793] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
- [ 0.485795] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
- [ 0.485796] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
- [ 0.485798] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
- [ 0.485800] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
- [ 0.485802] pci_bus 0000:00: resource 20 [mem 0x90000000-0xefffffff window]
- [ 0.485804] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
- [ 0.485806] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.485808] pci_bus 0000:01: resource 1 [mem 0xee000000-0xef0fffff]
- [ 0.485810] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
- [ 0.485812] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- [ 0.485813] pci_bus 0000:02: resource 1 [mem 0xef400000-0xef4fffff]
- [ 0.485815] pci_bus 0000:03: resource 1 [mem 0xef200000-0xef3fffff]
- [ 0.486099] NET: Registered protocol family 2
- [ 0.486252] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
- [ 0.486291] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.486436] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.486691] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.486732] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.486767] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.486836] NET: Registered protocol family 1
- [ 0.486852] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.487409] PCI: CLS 64 bytes, default 64
- [ 0.487448] Unpacking initramfs...
- [ 0.645976] Freeing initrd memory: 9012K
- [ 0.646027] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.0
- [ 0.646031] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.1
- [ 0.646035] DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:1e.2
- [ 0.646038] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:1e.0
- [ 0.646056] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.646059] software IO TLB [mem 0x7f23e000-0x8323e000] (64MB) mapped at [ (ptrval)- (ptrval)]
- [ 0.646094] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
- [ 0.646126] clocksource: Switched to clocksource tsc
- [ 0.646296] Scanning for low memory corruption every 60 seconds
- [ 0.647116] Initialise system trusted keyrings
- [ 0.647130] Key type blacklist registered
- [ 0.647183] workingset: timestamp_bits=41 max_order=21 bucket_order=0
- [ 0.648644] zbud: loaded
- [ 0.649073] pstore: using lz4hc compression
- [ 0.650484] Key type asymmetric registered
- [ 0.650485] Asymmetric key parser 'x509' registered
- [ 0.650535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.650603] io scheduler noop registered
- [ 0.650604] io scheduler deadline registered
- [ 0.650655] io scheduler cfq registered (default)
- [ 0.650657] io scheduler mq-deadline registered
- [ 0.650658] io scheduler kyber registered
- [ 0.650665] io scheduler bfq registered
- [ 0.651832] pcieport 0000:00:1c.0: AER enabled with IRQ 122
- [ 0.651858] pcieport 0000:00:1c.4: AER enabled with IRQ 123
- [ 0.651881] pcieport 0000:00:1c.5: AER enabled with IRQ 124
- [ 0.651896] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
- [ 0.651909] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
- [ 0.651922] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
- [ 0.652006] efifb: probing for efifb
- [ 0.652022] efifb: framebuffer at 0xc0000000, using 1920k, total 1920k
- [ 0.652023] efifb: mode is 800x600x32, linelength=3200, pages=1
- [ 0.652024] efifb: scrolling: redraw
- [ 0.652026] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.653578] Console: switching to colour frame buffer device 100x37
- [ 0.654800] fb0: EFI VGA frame buffer device
- [ 0.654811] intel_idle: MWAIT substates: 0x11142120
- [ 0.654812] intel_idle: v0.4.1 model 0x8E
- [ 0.655341] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.655409] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:01/PNP0C0D:00/input/input0
- [ 0.655417] ACPI: Lid Switch [LID]
- [ 0.655499] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- [ 0.655507] ACPI: Sleep Button [SLPB]
- [ 0.655543] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 0.655550] ACPI: Power Button [PWRB]
- [ 0.655588] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.655642] ACPI: Power Button [PWRF]
- [ 0.658547] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.658549] ACPI: Thermal Zone [THRM] (45 C)
- [ 0.658818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.660741] intel_pstate: Intel P-state driver initializing
- [ 0.661334] intel_pstate: HWP enabled
- [ 0.661632] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.661659] intel_pmc_core: initialized
- [ 0.661893] NET: Registered protocol family 10
- [ 0.666692] Segment Routing with IPv6
- [ 0.666711] NET: Registered protocol family 17
- [ 0.667617] RAS: Correctable Errors collector initialized.
- [ 0.667694] microcode: sig=0x806ea, pf=0x80, revision=0x84
- [ 0.667972] microcode: Microcode Update Driver: v2.2.
- [ 0.667982] sched_clock: Marking stable (667968141, 0)->(658960188, 9007953)
- [ 0.668525] registered taskstats version 1
- [ 0.668531] Loading compiled-in X.509 certificates
- [ 0.668548] zswap: loaded using pool lzo/zbud
- [ 0.671877] Key type big_key registered
- [ 0.673647] Magic number: 6:594:29
- [ 0.673708] memory memory69: hash matches
- [ 0.673729] hctosys: unable to open rtc device (rtc0)
- [ 0.814584] Freeing unused kernel memory: 1476K
- [ 0.814585] Write protecting the kernel read-only data: 16384k
- [ 0.815480] Freeing unused kernel memory: 2016K
- [ 0.816199] Freeing unused kernel memory: 608K
- [ 0.910814] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
- [ 0.910815] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.911850] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.917807] ACPI: bus type USB registered
- [ 0.917821] usbcore: registered new interface driver usbfs
- [ 0.917828] usbcore: registered new interface driver hub
- [ 0.917853] usbcore: registered new device driver usb
- [ 0.919366] SCSI subsystem initialized
- [ 0.922241] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.922246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- [ 0.923315] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
- [ 0.923319] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 0.923357] libata version 3.00 loaded.
- [ 0.923469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
- [ 0.923471] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.923472] usb usb1: Product: xHCI Host Controller
- [ 0.923473] usb usb1: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
- [ 0.923474] usb usb1: SerialNumber: 0000:00:14.0
- [ 0.923581] hub 1-0:1.0: USB hub found
- [ 0.923596] hub 1-0:1.0: 12 ports detected
- [ 0.924378] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.924380] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 0.924383] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
- [ 0.924409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
- [ 0.924410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.924411] usb usb2: Product: xHCI Host Controller
- [ 0.924412] usb usb2: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
- [ 0.924413] usb usb2: SerialNumber: 0000:00:14.0
- [ 0.924471] hub 2-0:1.0: USB hub found
- [ 0.924481] hub 2-0:1.0: 6 ports detected
- [ 0.924617] usb: port power management may be unreliable
- [ 0.924956] ahci 0000:00:17.0: version 3.0
- [ 0.935641] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
- [ 0.935643] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
- [ 0.936205] scsi host0: ahci
- [ 0.936515] scsi host1: ahci
- [ 0.936631] scsi host2: ahci
- [ 0.936661] ata1: SATA max UDMA/133 abar m2048@0xef535000 port 0xef535100 irq 126
- [ 0.936663] ata2: SATA max UDMA/133 abar m2048@0xef535000 port 0xef535180 irq 126
- [ 0.936664] ata3: SATA max UDMA/133 abar m2048@0xef535000 port 0xef535200 irq 126
- [ 0.964458] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 1.247334] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.247368] ata3: SATA link down (SStatus 4 SControl 300)
- [ 1.247407] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.251157] ata2.00: ATAPI: SlimtypeDVD A DA8AESH, XAAM, max UDMA/133
- [ 1.253828] usb 1-4: new full-speed USB device number 2 using xhci_hcd
- [ 1.261182] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 1.261190] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.261196] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1.262188] ata2.00: configured for UDMA/133
- [ 1.390528] ata1.00: ATA-10: ST1000LM035-1RK172, SDM2, max UDMA/133
- [ 1.390534] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.397174] usb 1-4: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 2.03
- [ 1.397180] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.397184] usb 1-4: Product: 2.4G Keyboard Mouse
- [ 1.397187] usb 1-4: Manufacturer: MOSART Semi.
- [ 1.403801] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.408294] usbcore: registered new interface driver usbhid
- [ 1.408294] usbhid: USB HID core driver
- [ 1.409051] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:062A:4101.0001/input/input5
- [ 1.414551] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 1.414555] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.414558] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1.452168] ata1.00: configured for UDMA/133
- [ 1.462204] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM2 PQ: 0 ANSI: 5
- [ 1.463668] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-4/input0
- [ 1.464252] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:062A:4101.0002/input/input6
- [ 1.471895] scsi 1:0:0:0: CD-ROM Slimtype DVD A DA8AESH XAAM PQ: 0 ANSI: 5
- [ 1.517011] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 1.517018] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 1.517042] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.517048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.517085] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.520043] usb 1-6: new high-speed USB device number 3 using xhci_hcd
- [ 1.520373] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-4/input1
- [ 1.562865] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
- [ 1.562871] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.563179] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 1.566649] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
- [ 1.568510] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.684012] usb 1-6: New USB device found, idVendor=13d3, idProduct=5a01, bcdDevice=16.08
- [ 1.684018] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
- [ 1.684022] usb 1-6: Product: USB2.0 VGA UVC WebCam
- [ 1.684026] usb 1-6: Manufacturer: Azurewave
- [ 1.684029] usb 1-6: SerialNumber: 0x0001
- [ 1.810114] usb 1-8: new full-speed USB device number 4 using xhci_hcd
- [ 1.951600] usb 1-8: New USB device found, idVendor=13d3, idProduct=3496, bcdDevice= 0.01
- [ 1.951606] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.337386] random: fast init done
- [ 2.932599] PM: Image not found (code -22)
- [ 3.399292] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.933926] random: crng init done
- [ 5.776033] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
- [ 5.791384] systemd[1]: Detected architecture x86-64.
- [ 5.889821] systemd[1]: Set hostname to <prometheus>.
- [ 9.440349] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 9.440468] systemd[1]: Reached target Login Prompts.
- [ 9.443764] systemd[1]: Created slice User and Session Slice.
- [ 9.443811] systemd[1]: Listening on udev Kernel Socket.
- [ 9.443856] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 9.443895] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 9.443929] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 9.807570] EXT4-fs (sda6): re-mounted. Opts: data=ordered
- [ 10.594734] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 10.594844] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 10.679796] systemd-journald[262]: Received request to flush runtime journal from PID 1
- [ 15.207071] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input7
- [ 15.326139] rtc_cmos 00:01: RTC can wake from S4
- [ 15.326587] rtc_cmos 00:01: registered as rtc0
- [ 15.326597] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 15.333541] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 15.350577] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
- [ 15.355947] idma64 idma64.0: Found Intel integrated DMA 64-bit
- [ 15.364779] ACPI: Battery Slot [BAT0] (battery present)
- [ 15.369317] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
- [ 15.369507] idma64 idma64.1: Found Intel integrated DMA 64-bit
- [ 15.373322] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
- [ 15.373536] idma64 idma64.2: Found Intel integrated DMA 64-bit
- [ 15.373825] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
- [ 15.374005] idma64 idma64.3: Found Intel integrated DMA 64-bit
- [ 15.383655] i801_smbus 0000:00:1f.4: SPD Write Disable is set
- [ 15.383685] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
- [ 15.526246] ACPI: AC Adapter [AC0] (on-line)
- [ 15.532365] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
- [ 15.536936] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
- [ 15.590103] i2c_hid i2c-FTE1200:00: i2c-FTE1200:00 supply vdd not found, using dummy regulator
- [ 15.604584] input: FTE1200:00 0B05:0501 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-FTE1200:00/0018:0B05:0501.0003/input/input8
- [ 15.604723] hid-generic 0018:0B05:0501.0003: input,hidraw2: I2C HID v1.00 Mouse [FTE1200:00 0B05:0501] on i2c-FTE1200:00
- [ 15.689272] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 15.987142] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
- [ 15.987146] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 15.987148] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 15.987150] RAPL PMU: hw unit of domain dram 2^-14 Joules
- [ 15.987152] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 15.987154] RAPL PMU: hw unit of domain psys 2^-14 Joules
- [ 16.020525] Linux agpgart interface v0.103
- [ 16.108572] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 16.109980] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 16.384230] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 16.384240] cfg80211: failed to load regulatory.db
- [ 16.592757] cryptd: max_cpu_qlen set to 1000
- [ 16.644465] Bluetooth: Core ver 2.22
- [ 16.644486] NET: Registered protocol family 31
- [ 16.644487] Bluetooth: HCI device and connection manager initialized
- [ 16.644491] Bluetooth: HCI socket layer initialized
- [ 16.644493] Bluetooth: L2CAP socket layer initialized
- [ 16.644499] Bluetooth: SCO socket layer initialized
- [ 16.742476] usbcore: registered new interface driver btusb
- [ 16.794134] mousedev: PS/2 mouse device common for all mice
- [ 16.827550] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
- [ 16.840577] AVX2 version of gcm_enc/dec engaged.
- [ 16.840578] AES CTR mode by8 optimization enabled
- [ 16.985492] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 16.985516] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 16.985833] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
- [ 16.987281] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 16.998024] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0x0000000010459349, 18:31:bf:71:53:29, XID 14100800 IRQ 129
- [ 16.998027] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 17.112381] intel_rapl: Found RAPL domain package
- [ 17.112388] intel_rapl: Found RAPL domain core
- [ 17.112394] intel_rapl: Found RAPL domain uncore
- [ 17.112398] intel_rapl: Found RAPL domain dram
- [ 17.114006] asus_wmi: ASUS WMI generic driver loaded
- [ 17.197968] iTCO_vendor_support: vendor-support=0
- [ 17.204183] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 17.204427] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
- [ 17.204724] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 17.231994] media: Linux media interface: v0.10
- [ 17.317327] dw-apb-uart.2: ttyS0 at MMIO 0xef534000 (irq = 20, base_baud = 115200) is a 16550A
- [ 17.373158] asus_wmi: Initialization: 0x1
- [ 17.373327] asus_wmi: BIOS WMI version: 9.0
- [ 17.373484] asus_wmi: SFUN value: 0x21
- [ 17.376985] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
- [ 17.377355] asus_wmi: Number of fans: 0
- [ 17.468003] Adding 11999996k swap on /dev/sda7. Priority:-2 extents:1 across:11999996k FS
- [ 17.584423] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
- [ 17.584466] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
- [ 17.587456] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
- [ 17.619577] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1a3b:2b31
- [ 17.619585] ath10k_pci 0000:03:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
- [ 17.621408] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
- [ 17.698022] Linux video capture interface: v2.00
- [ 17.747978] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 17.915292] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
- [ 17.915293] fb: switching to inteldrmfb from EFI VGA
- [ 17.915308] Console: switching to colour dummy device 80x25
- [ 17.915457] [drm] Replacing VGA console driver
- [ 17.915743] input: FTE1200:00 0B05:0501 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-FTE1200:00/0018:0B05:0501.0003/input/input12
- [ 17.915916] hid-multitouch 0018:0B05:0501.0003: input,hidraw2: I2C HID v1.00 Mouse [FTE1200:00 0B05:0501] on i2c-FTE1200:00
- [ 17.916529] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 17.916529] [drm] Driver supports precise vblank timestamp query.
- [ 17.917365] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 17.925412] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
- [ 17.927232] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 17.927384] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
- [ 17.927503] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
- [ 17.927535] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input15
- [ 17.927755] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
- [ 17.937047] fbcon: inteldrmfb (fb0) is primary device
- [ 17.988946] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
- [ 18.068328] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
- [ 18.109730] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- [ 18.109731] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 18.109733] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- [ 18.109733] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 18.109734] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 18.109735] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b
- [ 18.161132] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
- [ 18.161163] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
- [ 18.161189] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
- [ 18.161213] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
- [ 18.161238] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
- [ 18.161263] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
- [ 18.184834] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a01)
- [ 18.188110] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
- [ 18.188111] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
- [ 18.188112] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
- [ 18.188146] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input22
- [ 18.188181] usbcore: registered new interface driver uvcvideo
- [ 18.188181] USB Video Class driver (1.1.1)
- [ 18.610586] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 18.617211] ath: EEPROM regdomain: 0x6a
- [ 18.617212] ath: EEPROM indicates we should expect a direct regpair map
- [ 18.617213] ath: Country alpha2 being used: 00
- [ 18.617214] ath: Regpair used: 0x6a
- [ 19.229140] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
- [ 19.257762] Console: switching to colour frame buffer device 240x67
- [ 19.288475] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 19.782650] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
- [ 20.477855] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 38.555694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 38.555695] Bluetooth: BNEP filters: protocol multicast
- [ 38.555699] Bluetooth: BNEP socket layer initialized
- [ 42.748312] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 42.932676] r8169 0000:02:00.0 enp2s0: link down
- [ 42.932846] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 42.942347] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 43.737027] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 44.540356] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 45.158577] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 47.648279] bbswitch: loading out-of-tree module taints kernel.
- [ 47.649298] bbswitch: version 0.8
- [ 47.649311] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
- [ 47.649325] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP01.PEGP
- [ 47.649349] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180313/nsarguments-66)
- [ 47.649661] bbswitch: detected an Optimus _DSM function
- [ 47.649684] pci 0000:01:00.0: enabling device (0006 -> 0007)
- [ 47.649902] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
- [ 47.652598] bbswitch: disabling discrete graphics
- [ 50.011097] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 54.914873] wlp3s0: authenticate with c4:a8:1d:55:b8:db
- [ 54.958289] wlp3s0: send auth to c4:a8:1d:55:b8:db (try 1/3)
- [ 54.959980] wlp3s0: authenticated
- [ 54.963418] wlp3s0: associate with c4:a8:1d:55:b8:db (try 1/3)
- [ 54.974001] wlp3s0: RX AssocResp from c4:a8:1d:55:b8:db (capab=0x411 status=0 aid=4)
- [ 54.977659] wlp3s0: associated
- [ 55.040143] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
- [ 57.164176] fuse init (API version 7.26)
- [ 97.152615] Bluetooth: RFCOMM TTY layer initialized
- [ 97.152626] Bluetooth: RFCOMM socket layer initialized
- [ 97.152639] Bluetooth: RFCOMM ver 1.11
- [ 113.682599] rfkill: input handler disabled
- [ 191.978780] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer c4:a8:1d:55:b8:db: -110
- [ 191.978788] wlp3s0: failed to remove key (0, c4:a8:1d:55:b8:db) from hardware (-110)
- [ 207.168958] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 207.177021] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 548.944670] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 729.734446] PM: suspend entry (deep)
- [ 729.734449] PM: Syncing filesystems ... done.
- [ 730.369598] bbswitch: enabling discrete graphics
- [ 730.552941] Freezing user space processes ... (elapsed 0.002 seconds) done.
- [ 730.555681] OOM killer disabled.
- [ 730.555683] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 730.557153] Suspending console(s) (use no_console_suspend to debug)
- [ 730.929359] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 731.558225] sd 0:0:0:0: [sda] Stopping disk
- [ 732.520443] ACPI: EC: interrupt blocked
- [ 732.559032] ACPI: Preparing to enter system sleep state S3
- [ 732.560206] ACPI: EC: event blocked
- [ 732.560207] ACPI: EC: EC stopped
- [ 732.560207] PM: Saving platform NVS memory
- [ 732.560241] Disabling non-boot CPUs ...
- [ 732.610616] smpboot: CPU 1 is now offline
- [ 732.677224] smpboot: CPU 2 is now offline
- [ 732.730535] smpboot: CPU 3 is now offline
- [ 732.784964] smpboot: CPU 4 is now offline
- [ 732.817053] smpboot: CPU 5 is now offline
- [ 732.857000] smpboot: CPU 6 is now offline
- [ 732.890346] smpboot: CPU 7 is now offline
- [ 732.896610] ACPI: Low-level resume complete
- [ 732.896702] ACPI: EC: EC started
- [ 732.896702] PM: Restoring platform NVS memory
- [ 732.899907] Enabling non-boot CPUs ...
- [ 732.899951] x86: Booting SMP configuration:
- [ 732.899952] smpboot: Booting Node 0 Processor 1 APIC 0x2
- [ 732.903068] cache: parent cpu1 should not be sleeping
- [ 732.903303] CPU1 is up
- [ 732.903325] smpboot: Booting Node 0 Processor 2 APIC 0x4
- [ 732.905203] cache: parent cpu2 should not be sleeping
- [ 732.905358] CPU2 is up
- [ 732.905379] smpboot: Booting Node 0 Processor 3 APIC 0x6
- [ 732.907248] cache: parent cpu3 should not be sleeping
- [ 732.907411] CPU3 is up
- [ 732.907432] smpboot: Booting Node 0 Processor 4 APIC 0x1
- [ 732.908035] cache: parent cpu4 should not be sleeping
- [ 732.908213] CPU4 is up
- [ 732.908236] smpboot: Booting Node 0 Processor 5 APIC 0x3
- [ 732.908738] cache: parent cpu5 should not be sleeping
- [ 732.908919] CPU5 is up
- [ 732.908941] smpboot: Booting Node 0 Processor 6 APIC 0x5
- [ 732.909456] cache: parent cpu6 should not be sleeping
- [ 732.909633] CPU6 is up
- [ 732.909649] smpboot: Booting Node 0 Processor 7 APIC 0x7
- [ 732.910140] cache: parent cpu7 should not be sleeping
- [ 732.910326] CPU7 is up
- [ 732.917752] ACPI: Waking up from system sleep state S3
- [ 732.927489] ACPI: EC: interrupt unblocked
- [ 732.966621] ACPI: EC: event unblocked
- [ 732.967424] sd 0:0:0:0: [sda] Starting disk
- [ 732.967483] usb usb1: root hub lost power or was reset
- [ 732.967488] usb usb2: root hub lost power or was reset
- [ 732.969476] ACPI: button: The lid device is not compliant to SW_LID.
- [ 733.281281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 733.281308] ata3: SATA link down (SStatus 4 SControl 300)
- [ 733.284094] ata2.00: configured for UDMA/133
- [ 733.310345] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
- [ 733.573651] usb 1-8: reset full-speed USB device number 4 using xhci_hcd
- [ 733.836994] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
- [ 733.989964] acpi LNXPOWER:13: Turning OFF
- [ 733.990227] acpi LNXPOWER:12: Turning OFF
- [ 733.990436] acpi LNXPOWER:11: Turning OFF
- [ 733.990640] acpi LNXPOWER:10: Turning OFF
- [ 733.990843] acpi LNXPOWER:0f: Turning OFF
- [ 733.991044] acpi LNXPOWER:0e: Turning OFF
- [ 733.991247] acpi LNXPOWER:0d: Turning OFF
- [ 733.991450] acpi LNXPOWER:0c: Turning OFF
- [ 733.991652] acpi LNXPOWER:0b: Turning OFF
- [ 733.991855] acpi LNXPOWER:0a: Turning OFF
- [ 733.992059] acpi LNXPOWER:09: Turning OFF
- [ 733.992261] acpi LNXPOWER:08: Turning OFF
- [ 733.992464] acpi LNXPOWER:07: Turning OFF
- [ 733.992667] acpi LNXPOWER:06: Turning OFF
- [ 733.992879] acpi LNXPOWER:04: Turning OFF
- [ 733.993082] acpi LNXPOWER:03: Turning OFF
- [ 733.993285] acpi LNXPOWER:02: Turning OFF
- [ 733.993512] acpi LNXPOWER:01: Turning OFF
- [ 733.993719] acpi LNXPOWER:00: Turning OFF
- [ 733.993850] OOM killer enabled.
- [ 733.993851] Restarting tasks ... done.
- [ 734.019090] bbswitch: disabling discrete graphics
- [ 734.051015] PM: suspend exit
- [ 734.054116] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 734.102742] r8169 0000:02:00.0 enp2s0: link down
- [ 734.102850] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 734.103774] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 734.876201] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 734.963540] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 735.780572] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 735.793584] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 735.793595] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 735.793602] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 735.856922] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 735.856932] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 735.856938] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 735.894716] ata1.00: configured for UDMA/133
- [ 736.564769] rfkill: input handler enabled
- [ 748.922973] rfkill: input handler disabled
- [ 838.938405] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 1002.370062] PM: hibernation entry
- [ 1002.370635] bbswitch: enabling discrete graphics
- [ 1002.555288] PM: Syncing filesystems ...
- [ 1003.359569] PM: done.
- [ 1003.359577] Freezing user space processes ... (elapsed 0.003 seconds) done.
- [ 1003.363345] OOM killer disabled.
- [ 1003.363645] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
- [ 1003.363649] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
- [ 1003.363652] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
- [ 1003.363658] PM: Marking nosave pages: [mem 0x84512000-0x84513fff]
- [ 1003.363661] PM: Marking nosave pages: [mem 0x89ac9000-0x8b37efff]
- [ 1003.363936] PM: Marking nosave pages: [mem 0x8b3ff000-0xffffffff]
- [ 1003.367388] PM: Basic memory bitmaps created
- [ 1003.367915] PM: Preallocating image memory... done (allocated 493699 pages)
- [ 1003.502733] PM: Allocated 1974796 kbytes in 0.13 seconds (15190.73 MB/s)
- [ 1003.502733] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 1003.715288] Suspending console(s) (use no_console_suspend to debug)
- [ 1003.919799] ACPI: EC: interrupt blocked
- [ 1003.936025] ACPI: Preparing to enter system sleep state S4
- [ 1003.938528] ACPI: EC: event blocked
- [ 1003.938529] ACPI: EC: EC stopped
- [ 1003.938531] PM: Saving platform NVS memory
- [ 1003.945496] Disabling non-boot CPUs ...
- [ 1003.996525] smpboot: CPU 1 is now offline
- [ 1004.063124] smpboot: CPU 2 is now offline
- [ 1004.129773] smpboot: CPU 3 is now offline
- [ 1004.170826] smpboot: CPU 4 is now offline
- [ 1004.222940] smpboot: CPU 5 is now offline
- [ 1004.262925] smpboot: CPU 6 is now offline
- [ 1004.302895] smpboot: CPU 7 is now offline
- [ 1004.305893] PM: Creating hibernation image:
- [ 1004.379449] PM: Need to copy 489370 pages
- [ 1004.379451] PM: Normal pages needed: 489370 + 1024, available pages: 1577624
- [ 1004.307683] PM: Restoring platform NVS memory
- [ 1004.308538] ACPI: EC: EC started
- [ 1004.309382] Enabling non-boot CPUs ...
- [ 1004.309448] x86: Booting SMP configuration:
- [ 1004.309449] smpboot: Booting Node 0 Processor 1 APIC 0x2
- [ 1004.310304] cache: parent cpu1 should not be sleeping
- [ 1004.310529] CPU1 is up
- [ 1004.310558] smpboot: Booting Node 0 Processor 2 APIC 0x4
- [ 1004.311429] cache: parent cpu2 should not be sleeping
- [ 1004.311664] CPU2 is up
- [ 1004.311692] smpboot: Booting Node 0 Processor 3 APIC 0x6
- [ 1004.312592] cache: parent cpu3 should not be sleeping
- [ 1004.312850] CPU3 is up
- [ 1004.312878] smpboot: Booting Node 0 Processor 4 APIC 0x1
- [ 1004.313910] cache: parent cpu4 should not be sleeping
- [ 1004.314172] CPU4 is up
- [ 1004.314205] smpboot: Booting Node 0 Processor 5 APIC 0x3
- [ 1004.315010] cache: parent cpu5 should not be sleeping
- [ 1004.315280] CPU5 is up
- [ 1004.315308] smpboot: Booting Node 0 Processor 6 APIC 0x5
- [ 1004.316157] cache: parent cpu6 should not be sleeping
- [ 1004.316448] CPU6 is up
- [ 1004.316474] smpboot: Booting Node 0 Processor 7 APIC 0x7
- [ 1004.317287] cache: parent cpu7 should not be sleeping
- [ 1004.317621] CPU7 is up
- [ 1004.329778] ACPI: Waking up from system sleep state S4
- [ 1004.341546] ACPI: EC: interrupt unblocked
- [ 1004.412787] ACPI: EC: event unblocked
- [ 1004.412852] usb usb1: root hub lost power or was reset
- [ 1004.412854] usb usb2: root hub lost power or was reset
- [ 1004.422999] sd 0:0:0:0: [sda] Starting disk
- [ 1004.468608] r8169 0000:02:00.0 enp2s0: link down
- [ 1004.736834] ata3: SATA link down (SStatus 4 SControl 300)
- [ 1004.740157] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1004.740188] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1004.744736] ata2.00: configured for UDMA/133
- [ 1004.752435] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 1004.752443] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1004.752449] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1004.759928] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
- [ 1004.815906] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 1004.815915] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1004.815921] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1004.853689] ata1.00: configured for UDMA/133
- [ 1005.023252] usb 1-8: reset full-speed USB device number 4 using xhci_hcd
- [ 1005.286534] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
- [ 1005.451330] acpi LNXPOWER:13: Turning OFF
- [ 1005.451603] acpi LNXPOWER:12: Turning OFF
- [ 1005.451863] acpi LNXPOWER:11: Turning OFF
- [ 1005.452122] acpi LNXPOWER:10: Turning OFF
- [ 1005.452379] acpi LNXPOWER:0f: Turning OFF
- [ 1005.452687] acpi LNXPOWER:0e: Turning OFF
- [ 1005.452947] acpi LNXPOWER:0d: Turning OFF
- [ 1005.453207] acpi LNXPOWER:0c: Turning OFF
- [ 1005.453465] acpi LNXPOWER:0b: Turning OFF
- [ 1005.453723] acpi LNXPOWER:0a: Turning OFF
- [ 1005.453979] acpi LNXPOWER:09: Turning OFF
- [ 1005.454236] acpi LNXPOWER:08: Turning OFF
- [ 1005.454493] acpi LNXPOWER:07: Turning OFF
- [ 1005.454750] acpi LNXPOWER:06: Turning OFF
- [ 1005.455019] acpi LNXPOWER:04: Turning OFF
- [ 1005.455279] acpi LNXPOWER:03: Turning OFF
- [ 1005.455534] acpi LNXPOWER:02: Turning OFF
- [ 1005.455618] acpi LNXPOWER:01: Turning OFF
- [ 1005.455700] acpi LNXPOWER:00: Turning OFF
- [ 1005.455785] PM: Basic memory bitmaps freed
- [ 1005.455789] OOM killer enabled.
- [ 1005.455790] Restarting tasks ... done.
- [ 1005.470034] bbswitch: disabling discrete graphics
- [ 1005.505206] PM: hibernation exit
- [ 1005.530741] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 1005.575152] r8169 0000:02:00.0 enp2s0: link down
- [ 1005.575252] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 1005.576029] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 1005.576576] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
- [ 1005.576585] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 1005.576590] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
- [ 1005.576593] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 1005.611431] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
- [ 1005.611449] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 1005.611461] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
- [ 1005.611469] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 1006.355344] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 1007.162604] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 1007.277014] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 1007.435282] rfkill: input handler enabled
- [ 1012.122275] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 1017.000957] wlp3s0: authenticate with c4:a8:1d:55:b8:db
- [ 1017.044151] wlp3s0: send auth to c4:a8:1d:55:b8:db (try 1/3)
- [ 1017.045853] wlp3s0: authenticated
- [ 1017.049015] wlp3s0: associate with c4:a8:1d:55:b8:db (try 1/3)
- [ 1017.059526] wlp3s0: RX AssocResp from c4:a8:1d:55:b8:db (capab=0x411 status=0 aid=1)
- [ 1017.062996] wlp3s0: associated
- [ 1017.080901] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
- [ 1020.659294] rfkill: input handler disabled
- [ 4163.819169] asus_wmi: Unknown key cf pressed
- [ 4628.595333] wlp3s0: deauthenticating from c4:a8:1d:55:b8:db by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 4631.621227] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer c4:a8:1d:55:b8:db: -110
- [ 4631.621235] wlp3s0: failed to remove key (0, c4:a8:1d:55:b8:db) from hardware (-110)
- [ 4631.636162] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 4631.813267] PM: hibernation entry
- [ 4631.813544] bbswitch: enabling discrete graphics
- [ 4631.994871] PM: Syncing filesystems ...
- [ 4633.452964] PM: done.
- [ 4633.452971] Freezing user space processes ... (elapsed 0.004 seconds) done.
- [ 4633.457195] OOM killer disabled.
- [ 4633.457530] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
- [ 4633.457534] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
- [ 4633.457537] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
- [ 4633.457544] PM: Marking nosave pages: [mem 0x84512000-0x84513fff]
- [ 4633.457547] PM: Marking nosave pages: [mem 0x89ac9000-0x8b37efff]
- [ 4633.457823] PM: Marking nosave pages: [mem 0x8b3ff000-0xffffffff]
- [ 4633.461281] PM: Basic memory bitmaps created
- [ 4633.461880] PM: Preallocating image memory... done (allocated 778626 pages)
- [ 4633.968352] PM: Allocated 3114504 kbytes in 0.50 seconds (6229.00 MB/s)
- [ 4633.968353] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 4634.181370] Suspending console(s) (use no_console_suspend to debug)
- [ 4634.459254] ACPI: EC: interrupt blocked
- [ 4634.475442] ACPI: Preparing to enter system sleep state S4
- [ 4634.477927] ACPI: EC: event blocked
- [ 4634.477928] ACPI: EC: EC stopped
- [ 4634.477930] PM: Saving platform NVS memory
- [ 4634.481638] Disabling non-boot CPUs ...
- [ 4634.529244] smpboot: CPU 1 is now offline
- [ 4634.595888] smpboot: CPU 2 is now offline
- [ 4634.649187] smpboot: CPU 3 is now offline
- [ 4634.693583] smpboot: CPU 4 is now offline
- [ 4634.735729] smpboot: CPU 5 is now offline
- [ 4634.769010] smpboot: CPU 6 is now offline
- [ 4634.812343] smpboot: CPU 7 is now offline
- [ 4634.815747] PM: Creating hibernation image:
- [ 4634.883931] PM: Need to copy 776453 pages
- [ 4634.883933] PM: Normal pages needed: 776453 + 1024, available pages: 1290546
- [ 4634.817284] PM: Restoring platform NVS memory
- [ 4634.818051] ACPI: EC: EC started
- [ 4634.818852] Enabling non-boot CPUs ...
- [ 4634.818889] x86: Booting SMP configuration:
- [ 4634.818890] smpboot: Booting Node 0 Processor 1 APIC 0x2
- [ 4634.819625] cache: parent cpu1 should not be sleeping
- [ 4634.819828] CPU1 is up
- [ 4634.819853] smpboot: Booting Node 0 Processor 2 APIC 0x4
- [ 4634.820596] cache: parent cpu2 should not be sleeping
- [ 4634.820800] CPU2 is up
- [ 4634.820822] smpboot: Booting Node 0 Processor 3 APIC 0x6
- [ 4634.821529] cache: parent cpu3 should not be sleeping
- [ 4634.821762] CPU3 is up
- [ 4634.821784] smpboot: Booting Node 0 Processor 4 APIC 0x1
- [ 4634.822620] cache: parent cpu4 should not be sleeping
- [ 4634.822858] CPU4 is up
- [ 4634.822888] smpboot: Booting Node 0 Processor 5 APIC 0x3
- [ 4634.823592] cache: parent cpu5 should not be sleeping
- [ 4634.823833] CPU5 is up
- [ 4634.823854] smpboot: Booting Node 0 Processor 6 APIC 0x5
- [ 4634.824526] cache: parent cpu6 should not be sleeping
- [ 4634.824781] CPU6 is up
- [ 4634.824802] smpboot: Booting Node 0 Processor 7 APIC 0x7
- [ 4634.825473] cache: parent cpu7 should not be sleeping
- [ 4634.825750] CPU7 is up
- [ 4634.836210] ACPI: Waking up from system sleep state S4
- [ 4634.846804] ACPI: EC: interrupt unblocked
- [ 4634.934450] ACPI: EC: event unblocked
- [ 4634.934497] usb usb1: root hub lost power or was reset
- [ 4634.934498] usb usb2: root hub lost power or was reset
- [ 4634.944643] sd 0:0:0:0: [sda] Starting disk
- [ 4634.988002] r8169 0000:02:00.0 enp2s0: link down
- [ 4635.259221] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4635.259301] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4635.259329] ata3: SATA link down (SStatus 4 SControl 300)
- [ 4635.265317] ata2.00: configured for UDMA/133
- [ 4635.271413] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 4635.271420] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 4635.271425] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 4635.282380] usb 1-8: reset full-speed USB device number 4 using xhci_hcd
- [ 4635.334557] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 4635.334567] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 4635.334573] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 4635.372361] ata1.00: configured for UDMA/133
- [ 4635.545687] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
- [ 4635.809027] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
- [ 4635.964802] acpi LNXPOWER:13: Turning OFF
- [ 4635.965117] acpi LNXPOWER:12: Turning OFF
- [ 4635.965381] acpi LNXPOWER:11: Turning OFF
- [ 4635.965643] acpi LNXPOWER:10: Turning OFF
- [ 4635.965899] acpi LNXPOWER:0f: Turning OFF
- [ 4635.966155] acpi LNXPOWER:0e: Turning OFF
- [ 4635.966413] acpi LNXPOWER:0d: Turning OFF
- [ 4635.966672] acpi LNXPOWER:0c: Turning OFF
- [ 4635.966931] acpi LNXPOWER:0b: Turning OFF
- [ 4635.967191] acpi LNXPOWER:0a: Turning OFF
- [ 4635.967451] acpi LNXPOWER:09: Turning OFF
- [ 4635.967709] acpi LNXPOWER:08: Turning OFF
- [ 4635.967968] acpi LNXPOWER:07: Turning OFF
- [ 4635.968225] acpi LNXPOWER:06: Turning OFF
- [ 4635.968526] acpi LNXPOWER:04: Turning OFF
- [ 4635.968788] acpi LNXPOWER:03: Turning OFF
- [ 4635.969044] acpi LNXPOWER:02: Turning OFF
- [ 4635.969300] acpi LNXPOWER:01: Turning OFF
- [ 4635.969410] acpi LNXPOWER:00: Turning OFF
- [ 4635.969487] PM: Basic memory bitmaps freed
- [ 4635.969490] OOM killer enabled.
- [ 4635.969491] Restarting tasks ... done.
- [ 4635.981208] bbswitch: disabling discrete graphics
- [ 4636.016507] PM: hibernation exit
- [ 4636.746042] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 4636.794245] r8169 0000:02:00.0 enp2s0: link down
- [ 4636.794395] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 4636.796596] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 4636.797659] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
- [ 4636.797675] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 4636.797687] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
- [ 4636.797694] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 4636.797703] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
- [ 4636.797713] pcieport 0000:00:1c.5: can't find device of ID00e5
- [ 4636.830225] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
- [ 4636.830242] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 4636.830254] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00002001/00002000
- [ 4636.830261] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 4636.830270] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
- [ 4636.830280] pcieport 0000:00:1c.5: can't find device of ID00e5
- [ 4637.574738] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 4638.372225] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 4638.482697] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 4639.448944] rfkill: input handler enabled
- [ 4643.330472] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 4648.207712] wlp3s0: authenticate with c4:a8:1d:55:b8:db
- [ 4648.247328] wlp3s0: send auth to c4:a8:1d:55:b8:db (try 1/3)
- [ 4648.248975] wlp3s0: authenticated
- [ 4648.251685] wlp3s0: associate with c4:a8:1d:55:b8:db (try 1/3)
- [ 4648.261223] wlp3s0: RX AssocResp from c4:a8:1d:55:b8:db (capab=0x411 status=0 aid=4)
- [ 4648.264401] wlp3s0: associated
- [ 4648.280955] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
- [ 4673.235202] rfkill: input handler disabled
- [ 4720.925227] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
- [ 4720.943485] usb 2-1: New USB device found, idVendor=13fe, idProduct=5500, bcdDevice= 1.10
- [ 4720.943492] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4720.943496] usb 2-1: Product: USB3.0 VIKINGMAN
- [ 4720.943500] usb 2-1: Manufacturer:
- [ 4720.943504] usb 2-1: SerialNumber: 070B6324CA654F83
- [ 4721.258626] usb-storage 2-1:1.0: USB Mass Storage device detected
- [ 4721.258774] scsi host3: usb-storage 2-1:1.0
- [ 4721.258847] usbcore: registered new interface driver usb-storage
- [ 4721.263017] usbcore: registered new interface driver uas
- [ 4722.267060] scsi 3:0:0:0: Direct-Access USB3.0 VIKINGMAN PMAP PQ: 0 ANSI: 6
- [ 4722.267871] sd 3:0:0:0: Attached scsi generic sg2 type 0
- [ 4722.269006] sd 3:0:0:0: [sdb] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB)
- [ 4722.269706] sd 3:0:0:0: [sdb] Write Protect is off
- [ 4722.269712] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 00
- [ 4722.270378] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 4722.379061] sdb: sdb1
- [ 4722.383109] sd 3:0:0:0: [sdb] Attached SCSI removable disk
- [ 6071.473864] sdb: detected capacity change from 15514730496 to 0
- [ 6073.136479] usb 2-1: USB disconnect, device number 2
- [ 7821.950035] asus_wmi: Unknown key 5b pressed
- [ 7823.980056] asus_wmi: Unknown key 5b pressed
- [ 7826.486806] asus_wmi: Unknown key 5b pressed
- [ 7828.096557] asus_wmi: Unknown key 5b pressed
- [ 9127.404879] rfkill: input handler enabled
- [ 9145.886725] rfkill: input handler disabled
- [ 9159.617594] rfkill: input handler enabled
- [ 9818.478385] rfkill: input handler disabled
- [ 9943.361763] rfkill: input handler enabled
- [ 9958.389461] rfkill: input handler disabled
- [10114.638594] rfkill: input handler enabled
- [10144.408303] rfkill: input handler disabled
- [10547.611231] rfkill: input handler enabled
- [10564.087400] rfkill: input handler disabled
- [11485.624867] rfkill: input handler enabled
- [11498.655717] rfkill: input handler disabled
- [14279.604775] rfkill: input handler enabled
- [14294.274092] rfkill: input handler disabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement