API tools faq
paste
rayddteam

odroid-x linux bootlog

rayddteam
Mar 17th, 2013
177
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.39 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2010.12-svn (Jul 31 2012 - 14:36:45) for ODROID4412
  2.  
  3.  
  4. CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
  5. APLL = 1000MHz, MPLL = 800MHz
  6. DRAM: 1023 MiB
  7.  
  8. PMIC VERSION : 0x00, CHIP REV : 2
  9.  
  10. BL1 version: N/A (TrustZone Enabled BSP)
  11.  
  12.  
  13. Checking Boot Mode ... EMMC4.41
  14. REVISION: 1.1
  15. Manufacturer TOSHIBA [ 15028MB ]
  16. MMC Device 0: 15028 MB
  17. MMC Device 1: 0 MB
  18. MMC Device 2 not found
  19. ModeKey Check... run normal_boot
  20. Net: No ethernet found.
  21. Hit any key to stop autoboot: 0
  22. reading kernel..device 0 Start 1057, Count 16384
  23. MMC read: dev # 0, block # 1057, count 16384 ... 16384 blocks read: OK
  24. completed
  25. Boot with zImage
  26.  
  27. Starting kernel ...
  28.  
  29. Uncompressing Linux... done, booting the kernel.
  30. [ 0.000000] Booting Linux on physical CPU 0
  31. [ 0.000000] Linux version 3.6.0 ([email protected]) (gcc version 4.7.2 (Gentoo 4.7.2 p1.1, pie-0.5.4) ) #3 SMP PREEMPT Wed Oct 10 23:47:33 MSK 2012
  32. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  33. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  34. [ 0.000000] Machine: ODROID-X
  35. [ 0.000000] cma: CMA: reserved 16 MiB at 6e800000
  36. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  37. [ 0.000000] CPU EXYNOS4412 (id 0xe4412211)
  38. [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  39. [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
  40. [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
  41. [ 0.000000] audiocdclk: no parent clock specified
  42. [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
  43. [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000
  44. [ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
  45. [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  46. [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
  47. [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
  48. [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
  49. [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
  50. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
  51. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
  52. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
  53. [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
  54. [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 50000000
  55. [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
  56. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0d8d000 s7808 r8192 d12672 u32768
  57. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255746
  58. [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200n8 root=/dev/mmcblk1p3 rootwait ro
  59. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  60. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  61. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  62. [ 0.000000] Memory: 48MB 216MB 743MB = 1007MB total
  63. [ 0.000000] Memory: 999912k/1016296k available, 31256k reserved, 269312K highmem
  64. [ 0.000000] Virtual kernel memory layout:
  65. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  66. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  67. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  68. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  69. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  70. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  71. [ 0.000000] .text : 0xc0008000 - 0xc04cb180 (4877 kB)
  72. [ 0.000000] .init : 0xc04cc000 - 0xc04f4e80 ( 164 kB)
  73. [ 0.000000] .data : 0xc04f6000 - 0xc0547ba0 ( 327 kB)
  74. [ 0.000000] .bss : 0xc0547bc4 - 0xc05809b8 ( 228 kB)
  75. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  76. [ 0.000000] Preemptible hierarchical RCU implementation.
  77. [ 0.000000] NR_IRQS:549
  78. [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
  79. [ 0.000000] Console: colour dummy device 80x30
  80. [ 0.000000] console [tty1] enabled
  81. [ 0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
  82. [ 0.045000] pid_max: default: 32768 minimum: 301
  83. [ 0.045000] Mount-cache hash table entries: 512
  84. [ 0.045000] CPU: Testing write buffer coherency: ok
  85. [ 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
  86. [ 0.045000] Setting up static identity map for 0x40389498 - 0x403894f0
  87. [ 0.045000] L310 cache controller enabled
  88. [ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
  89. [ 0.065000] CPU1: Booted secondary processor
  90. [ 0.085000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
  91. [ 0.085000] CPU1: Unknown IPI message 0x1
  92. [ 0.095000] CPU2: Booted secondary processor
  93. [ 0.115000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
  94. [ 0.115000] CPU2: Unknown IPI message 0x1
  95. [ 0.125000] CPU3: Booted secondary processor
  96. [ 0.145000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
  97. [ 0.145000] CPU3: Unknown IPI message 0x1
  98. [ 0.145000] Brought up 4 CPUs
  99. [ 0.145000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
  100. [ 0.145000] devtmpfs: initialized
  101. [ 0.150000] regulator-dummy: no parameters
  102. [ 0.150000] NET: Registered protocol family 16
  103. [ 0.155000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  104. [ 0.165000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  105. [ 0.165000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  106. [ 0.165000] S3C Power Management, Copyright 2004 Simtec Electronics
  107. [ 0.165000] EXYNOS4x12 PMU Initialize
  108. [ 0.165000] EXYNOS: Initializing architecture
  109. [ 0.165000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
  110. [ 0.175000] bio: create slab <bio-0> at 0
  111. [ 0.175000] hdmi_5v: 5000 mV
  112. [ 0.175000] usbcore: registered new interface driver usbfs
  113. [ 0.175000] usbcore: registered new interface driver hub
  114. [ 0.175000] usbcore: registered new device driver usb
  115. [ 0.175000] s3c-i2c s3c2440-i2c.0: slave address 0x10
  116. [ 0.175000] s3c-i2c s3c2440-i2c.0: bus frequency set to 390 KHz
  117. [ 0.175000] max77686 0-0009: device found
  118. [ 0.175000] max77686 0-0009: irq is not specified
  119. [ 0.175000] VDD_ALIVE_1.0V: 1000 mV
  120. [ 0.180000] VDDQ_M1M2_1.8V: 1800 mV
  121. [ 0.180000] VDDQ_M0_1.8V: 1800 mV
  122. [ 0.180000] VDDQ_MMC2_2.8V: 2800 mV
  123. [ 0.180000] VDDQ_MMC13_1V8: 1800 mV
  124. [ 0.180000] VDD_MPLL_1.0V: 1000 mV
  125. [ 0.185000] VDD_VPLL_1.0V: 1000 mV
  126. [ 0.185000] VDD10_HDMI_1.0V: 1000 mV
  127. [ 0.185000] VDD_VTCORE_1.0V: 1000 mV
  128. [ 0.185000] VDDQ_MIPIHSI_1.8V: 1800 mV
  129. [ 0.185000] VDD18_ABB1_1.8V: 1800 mV
  130. [ 0.190000] VDD33_UOTG_3.3V: 3300 mV
  131. [ 0.190000] VDDQ_C2C_1.8V: 1800 mV
  132. [ 0.190000] VDD18_ABB2_1.8V: 1800 mV
  133. [ 0.190000] VDD10_HSIC_1.0V: 1000 mV
  134. [ 0.195000] VDD18_HSIC_1.8V: 1800 mV
  135. [ 0.195000] VDDQ_CAM_1.8V: 1800 mV
  136. [ 0.195000] VDD_LDO18_1.8V: 1800 mV
  137. [ 0.195000] VDD_VTCAM_1.8V: 1800 mV
  138. [ 0.195000] VDD_LDO20_1V8: 1800 mV
  139. [ 0.195000] VDD_SDCARD_3.3V: 3300 mV
  140. [ 0.195000] VDD_LDO22_2.8V: 2800 mV
  141. [ 0.200000] VDD_TOUCH_2.8V: 2800 mV
  142. [ 0.200000] VDD_TOUCHLED_3.3V: 3300 mV
  143. [ 0.200000] VDDQ_LCD_1.8V: 1800 mV
  144. [ 0.200000] VDD_MOTOR_3.0V: 3000 mV
  145. [ 0.200000] VDD_MIF_1.0V: 800 <--> 1050 mV at 1000 mV
  146. [ 0.200000] VDD_ARM_1.3V: 800 <--> 1350 mV at 1100 mV
  147. [ 0.205000] VDD_INT_1.0V: 800 <--> 1150 mV at 1000 mV
  148. [ 0.205000] VDD_G3D_1.0V: 850 <--> 1200 mV at 1000 mV
  149. [ 0.205000] VDDQ_CKEM1M2_1.2V: 1200 mV
  150. [ 0.205000] VDD_INL_1.35V: 1350 mV
  151. [ 0.205000] VDD_INL_2.0V: 2000 mV
  152. [ 0.210000] VDD_BUCK8_2.8V: 2800 mV
  153. [ 0.210000] VDD_BUCK9_1.2V: 1200 mV
  154. [ 0.210000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  155. [ 0.210000] s3c-i2c s3c2440-i2c.1: slave address 0x10
  156. [ 0.210000] s3c-i2c s3c2440-i2c.1: bus frequency set to 390 KHz
  157. [ 0.210000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  158. [ 0.210000] s3c-i2c s3c2440-i2c.3: slave address 0x10
  159. [ 0.210000] s3c-i2c s3c2440-i2c.3: bus frequency set to 390 KHz
  160. [ 0.210000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  161. [ 0.210000] s3c-i2c s3c2440-i2c.7: slave address 0x10
  162. [ 0.210000] s3c-i2c s3c2440-i2c.7: bus frequency set to 390 KHz
  163. [ 0.210000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
  164. [ 0.210000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
  165. [ 0.210000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
  166. [ 0.210000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
  167. [ 0.210000] Linux video capture interface: v2.00
  168. [ 0.210000] Advanced Linux Sound Architecture Driver Version 1.0.25.
  169. [ 0.210000] cfg80211: Calling CRDA to update world regulatory domain
  170. [ 0.210000] Switching to clocksource mct-frc
  171. [ 0.220000] NET: Registered protocol family 2
  172. [ 0.220000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  173. [ 0.220000] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  174. [ 0.225000] TCP: Hash tables configured (established 131072 bind 65536)
  175. [ 0.225000] TCP: reno registered
  176. [ 0.225000] UDP hash table entries: 512 (order: 2, 24576 bytes)
  177. [ 0.225000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  178. [ 0.225000] NET: Registered protocol family 1
  179. [ 0.225000] CPU PMU: probing PMU on CPU 0
  180. [ 0.225000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  181. [ 0.225000] bounce pool size: 64 pages
  182. [ 0.235000] msgmni has been set to 1458
  183. [ 0.235000] io scheduler noop registered
  184. [ 0.235000] io scheduler deadline registered
  185. [ 0.235000] io scheduler cfq registered (default)
  186. [ 0.240000] s3c-fb exynos4-fb.0: start latency exceeded, new value 750 ns
  187. [ 0.240000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 36417 ns
  188. [ 0.265000] Console: switching to colour frame buffer device 170x48
  189. [ 0.275000] s3c-fb exynos4-fb.0: window 0: fb
  190. [ 0.280000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
  191. [ 0.280000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  192. [ 0.285000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
  193. [ 0.285000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  194. [ 0.285000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
  195. [ 0.285000] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  196. [ 0.355000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  197. [ 0.360000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
  198. [ 0.360000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
  199. [ 1.245000] console [ttySAC1] enabled
  200. [ 1.250000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
  201. [ 1.260000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
  202. [ 1.275000] brd: module loaded
  203. [ 1.285000] loop: module loaded
  204. [ 1.285000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  205. [ 1.290000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
  206. [ 1.295000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  207. [ 1.305000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
  208. [ 1.320000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
  209. [ 1.320000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  210. [ 1.325000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  211. [ 1.335000] usb usb1: Product: S5P EHCI Host Controller
  212. [ 1.340000] usb usb1: Manufacturer: Linux 3.6.0 ehci_hcd
  213. [ 1.345000] usb usb1: SerialNumber: s5p-ehci
  214. [ 1.350000] hub 1-0:1.0: USB hub found
  215. [ 1.355000] hub 1-0:1.0: 3 ports detected
  216. [ 1.355000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  217. [ 1.365000] exynos-ohci exynos-ohci: Already power on PHY
  218. [ 1.370000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
  219. [ 1.375000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
  220. [ 1.380000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
  221. [ 1.445000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  222. [ 1.450000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  223. [ 1.460000] usb usb2: Product: EXYNOS OHCI Host Controller
  224. [ 1.465000] usb usb2: Manufacturer: Linux 3.6.0 ohci_hcd
  225. [ 1.470000] usb usb2: SerialNumber: exynos-ohci
  226. [ 1.475000] hub 2-0:1.0: USB hub found
  227. [ 1.475000] hub 2-0:1.0: 3 ports detected
  228. [ 1.480000] usb3503: USB HUB driver init
  229. [ 1.485000] usb3503: usb3503_probe:380
  230. [ 1.490000] usb3503: usb3503_set_mode: mode = 1
  231. [ 1.600000] usb3503: usb3503_register_write: reg: e7 data: 3 write failed
  232. [ 1.600000] usb3503: reg_write: write E7, req:03, val:00
  233. [ 1.605000] usb3503: SP_ILOCK write fail err = -6
  234. [ 1.610000] usb3503: usb3503_probe: probed on hub mode
  235. [ 1.615000] i2c-core: driver [usb3503] using legacy suspend method
  236. [ 1.625000] i2c-core: driver [usb3503] using legacy resume method
  237. [ 1.630000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
  238. [ 1.635000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
  239. [ 1.640000] s5p-hdmiphy 8-0038: probe successful
  240. [ 1.655000] s5p-hdmi exynos4-hdmi: probe successful
  241. [ 1.655000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
  242. [ 1.665000] s5p-mixer s5p-mixer: probe start
  243. [ 1.670000] s5p-mixer s5p-mixer: resources acquired
  244. [ 1.675000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
  245. [ 1.680000] s5p-mixer s5p-mixer: module s5p-sdo is missing
  246. [ 1.685000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video0
  247. [ 1.695000] fb1: registered frame buffer emulation for /dev/video0
  248. [ 1.700000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video1
  249. [ 1.705000] fb2: registered frame buffer emulation for /dev/video1
  250. [ 1.710000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video2
  251. [ 1.720000] fb3: registered frame buffer emulation for /dev/video2
  252. [ 1.725000] s5p-mixer s5p-mixer: probe successful
  253. [ 1.730000] cpuidle: using governor ladder
  254. [ 1.735000] sdhci: Secure Digital Host Controller Interface driver
  255. [ 1.740000] sdhci: Copyright(c) Pierre Ossman
  256. [ 1.745000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (88888888 Hz)
  257. [ 1.750000] mmc0: no vmmc regulator found
  258. [ 1.785000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
  259. [ 1.785000] Synopsys Designware Multimedia Card Interface Driver
  260. [ 1.790000] dw_mmc dw_mmc: Using PIO mode.
  261. [ 1.795000] mmc1: no vmmc regulator found
  262. [ 1.830000] mmc_host mmc1: Bus speed (slot 0) = 133333333Hz (slot req 400000Hz, actual 399201HZ div = 167)
  263. [ 1.830000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
  264. [ 1.830000] dw_mmc dw_mmc: Version ID is 240a
  265. [ 1.830000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 65 deep fifo
  266. [ 1.855000] usbcore: registered new interface driver usbhid
  267. [ 1.860000] usbhid: USB HID core driver
  268. [ 1.875000] max98090 1-0010: revision 0x42
  269. [ 1.880000] [MAX98090] max98090_set_record_main_mic(150)
  270. [ 1.885000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <-> samsung-i2s.0 mapping ok
  271. [ 1.895000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <-> samsung-i2s.0 mapping ok
  272. [ 1.900000] TCP: cubic registered
  273. [ 1.905000] NET: Registered protocol family 17
  274. [ 1.905000] NET: Registered protocol family 15
  275. [ 1.910000] NET: Registered protocol family 35
  276. [ 1.915000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  277. [ 1.925000] Registering SWP/SWPB emulation handler
  278. [ 1.930000] VDD_G3D_1.0V: incomplete constraints, leaving on
  279. [ 1.930000] VDDQ_LCD_1.8V: incomplete constraints, leaving on
  280. [ 1.940000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-31 19:49:03 UTC (1359661743)
  281. [ 1.950000] ALSA device list:
  282. [ 1.950000] #0: hkdk-max98090
  283. [ 1.955000] Waiting for root device /dev/mmcblk1p3...
  284. [ 1.985000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
  285. [ 1.985000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  286. [ 1.995000] hub 1-2:1.0: USB hub found
  287. [ 1.995000] hub 1-2:1.0: 3 ports detected
  288. [ 2.000000] mmc_host mmc1: Bus speed (slot 0) = 133333333Hz (slot req 26000000Hz, actual 22222222HZ div = 3)
  289. [ 2.010000] mmc1: new high speed MMC card at address 0001
  290. [ 2.015000] mmcblk0: mmc1:0001 016G92 14.6 GiB
  291. [ 2.020000] mmcblk0boot0: mmc1:0001 016G92 partition 1 4.00 MiB
  292. [ 2.025000] mmcblk0boot1: mmc1:0001 016G92 partition 2 4.00 MiB
  293. [ 2.035000] mmcblk0: p1 p2 p3
  294. [ 2.040000] mmcblk0boot1: unknown partition table
  295. [ 2.045000] mmcblk0boot0: unknown partition table
  296. [ 2.285000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
  297. [ 2.390000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514
  298. [ 2.390000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  299. [ 2.400000] hub 1-2.1:1.0: USB hub found
  300. [ 2.405000] hub 1-2.1:1.0: 5 ports detected
  301. [ 2.695000] usb 1-2.1.1: new high-speed USB device number 4 using s5p-ehci
  302. [ 2.800000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00
  303. [ 2.800000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!