Opsis flash successful

$ sudo /usr/local/bin/hdmi2usb-mode-switch --flash-image firmware/opsis/unstable/image-gateware+bios+firmware.bin -v
Numato Opsis in 'jtag' mode at /dev/bus/usb/003/021
 /sys/bus/usb/devices/3-2
 /sys/bus/usb/devices/3-2:1.0
My root dir: /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.0.0.post204-py3.5.egg/hdmi2usb/modeswitch
Board already in required mode (jtag)
Numato Opsis in 'jtag' mode at /dev/bus/usb/003/021
 /sys/bus/usb/devices/3-2
 /sys/bus/usb/devices/3-2:1.0
Running ['openocd', '-f', 'board/numato_opsis.cfg', '-c', 'init; xc6s_print_dna xc6s.tap; jtagspi_init 0 /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.0.0.post204-py3.5.egg/hdmi2usb/firmware/spartan6/opsis/bscan_spi_xc6slx45t.bit; jtagspi_program /home/abhas/Documents/MostlyHarmless/Opsis/HDMI2USB-mode-switch/firmware/opsis/v0.0.3-1077-g6747572/image-gateware+bios+firmware.bin 0x0; exit']
Open On-Chip Debugger 0.9.0+git20151228 (2016-01-26-04:52)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Warn : Adapter driver 'usb_blaster' did not declare which transports it allows; assuming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
Warn : incomplete ublast_vid_pid configuration
jtagspi_program
Info : usb blaster interface using libftdi
Info : This adapter doesn't support configurable speed
Info : JTAG tap: xc6s.tap tap/device found: 0x44028093 (mfg: 0x049 (Xilinx), part: 0x4028, ver: 0x4)
DNA = 100111010111100000001011110011100010010010001010111001100 (0x13af0179c4915cc)

loaded file /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.0.0.post204-py3.5.egg/hdmi2usb/firmware/spartan6/opsis/bscan_spi_xc6slx45t.bit to pld device 0 in 10s 134850us
Info : JTAG tap: xc6s.tap tap/device found: 0x44028093 (mfg: 0x049 (Xilinx), part: 0x4028, ver: 0x4)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
flash 'jtagspi' found at 0x00000000
auto erase enabled
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
Info : sector 0 took 262 ms
Info : sector 1 took 267 ms
Info : sector 2 took 265 ms
Info : sector 3 took 275 ms
Info : sector 4 took 265 ms
Info : sector 5 took 265 ms
Info : sector 6 took 269 ms
Info : sector 7 took 270 ms
Info : sector 8 took 269 ms
Info : sector 9 took 270 ms
Info : sector 10 took 267 ms
Info : sector 11 took 268 ms
Info : sector 12 took 269 ms
Info : sector 13 took 260 ms
Info : sector 14 took 261 ms
Info : sector 15 took 263 ms
Info : sector 16 took 248 ms
Info : sector 17 took 246 ms
Info : sector 18 took 235 ms
Info : sector 19 took 248 ms
Info : sector 20 took 244 ms
Info : sector 21 took 246 ms
Info : sector 22 took 245 ms
Info : sector 23 took 238 ms
Info : sector 24 took 239 ms
Info : sector 25 took 238 ms
Info : sector 26 took 236 ms
Info : sector 27 took 238 ms
Info : sector 28 took 237 ms
Info : sector 29 took 238 ms
Info : sector 30 took 251 ms
Info : sector 31 took 272 ms
Info : sector 32 took 276 ms
Info : sector 33 took 275 ms
wrote 2228224 bytes from file /home/abhas/Documents/MostlyHarmless/Opsis/HDMI2USB-mode-switch/firmware/opsis/v0.0.3-1077-g6747572/image-gateware+bios+firmware.bin in 85.275803s (25.517 KiB/s)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
read 2225584 bytes from file /home/abhas/Documents/MostlyHarmless/Opsis/HDMI2USB-mode-switch/firmware/opsis/v0.0.3-1077-g6747572/image-gateware+bios+firmware.bin and flash bank 0 at offset 0x00000000 in 80.609772s (26.962 KiB/s)
contents match
After flashing, the board will need to be power cycled.
Numato Opsis in 'jtag' mode at /dev/bus/usb/003/021
 /sys/bus/usb/devices/3-2
 /sys/bus/usb/devices/3-2:1.0
Found 1 boards.