API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 15th, 2017
139
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.51 KB | None | 0 0
raw download clone embed print report
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Hitachi/HGST Travelstar Z7K500
  3. Device Model: HGST HTS725050A7E630
  4. Serial Number: TF0500WJ04BY7L
  5. LU WWN Device Id: 5 000cca 7c5c1fe51
  6. Firmware Version: GH2OA910
  7. User Capacity: 500,107,862,016 bytes [500 GB]
  8. Sector Sizes: 512 bytes logical, 4096 bytes physical
  9. Rotation Rate: 7200 rpm
  10. Form Factor: 2.5 inches
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
  13. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  14. Local Time is: Fri Sep 15 07:48:15 2017 UTC
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: FAILED!
  20. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  21. See vendor-specific Attribute list for failed Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x00) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Disabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 45) seconds.
  32. Offline data collection
  33. capabilities: (0x51) SMART execute Offline immediate.
  34. No Auto Offline data collection support.
  35. Suspend Offline collection upon new
  36. command.
  37. No Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 92) minutes.
  50. SCT capabilities: (0x003d) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 074 071 062 Pre-fail Always - 88016429
  59. 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0
  60. 3 Spin_Up_Time 0x0023 253 100 033 Pre-fail Always - 1
  61. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 653
  62. 5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 27576 (0 2428)
  63. 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
  64. 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0
  65. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 252
  66. 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 610
  68. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  69. 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
  70. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 169410714415241
  71. 188 Command_Timeout 0x0032 099 098 000 Old_age Always - 26114011168778
  72. 190 Airflow_Temperature_Cel 0x0022 064 057 045 Old_age Always - 36 (Min/Max 33/36)
  73. 191 G-Sense_Error_Rate 0x0032 099 099 000 Old_age Always - 287
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3342387
  75. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 8819
  76. 196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 3503
  77. 197 Current_Pending_Sector 0x0032 091 082 000 Old_age Always - 440
  78. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0
  80. 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0
  81.  
  82. SMART Error Log Version: 1
  83. ATA Error Count: 12425 (device log contains only the most recent five errors)
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 12425 occurred at disk power-on lifetime: 252 hours (10 days + 12 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 40 41 01 1b 96 63 00 Error: UNC at LBA = 0x0063961b = 6526491
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. 60 01 28 1b 96 63 40 08 00:08:17.912 READ FPDMA QUEUED
  110. ef 10 02 00 00 00 a0 08 00:08:17.912 SET FEATURES [Enable SATA feature]
  111. ec 00 00 00 00 00 a0 08 00:08:17.908 IDENTIFY DEVICE
  112. ef 03 46 00 00 00 a0 08 00:08:17.908 SET FEATURES [Set transfer mode]
  113. ef 10 02 00 00 00 a0 08 00:08:17.908 SET FEATURES [Enable SATA feature]
  114.  
  115. Error 12424 occurred at disk power-on lifetime: 252 hours (10 days + 12 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 40 41 01 1e 96 63 00 Error: UNC at LBA = 0x0063961e = 6526494
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. 60 01 a8 1b 96 63 40 08 00:08:14.972 READ FPDMA QUEUED
  127. 60 01 a0 1e 96 63 40 08 00:08:14.972 READ FPDMA QUEUED
  128. ef 10 02 00 00 00 a0 08 00:08:14.972 SET FEATURES [Enable SATA feature]
  129. ec 00 00 00 00 00 a0 08 00:08:14.969 IDENTIFY DEVICE
  130. ef 03 46 00 00 00 a0 08 00:08:14.968 SET FEATURES [Set transfer mode]
  131.  
  132. Error 12423 occurred at disk power-on lifetime: 252 hours (10 days + 12 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 40 41 01 1c 96 63 00 Error: UNC at LBA = 0x0063961c = 6526492
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. 60 01 28 1e 96 63 40 08 00:08:12.020 READ FPDMA QUEUED
  144. 60 01 20 1b 96 63 40 08 00:08:12.020 READ FPDMA QUEUED
  145. 60 01 18 1c 96 63 40 08 00:08:12.020 READ FPDMA QUEUED
  146. ef 10 02 00 00 00 a0 08 00:08:12.020 SET FEATURES [Enable SATA feature]
  147. ec 00 00 00 00 00 a0 08 00:08:12.017 IDENTIFY DEVICE
  148.  
  149. Error 12422 occurred at disk power-on lifetime: 252 hours (10 days + 12 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 40 41 01 1d 96 63 00 Error: UNC at LBA = 0x0063961d = 6526493
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. 60 01 98 1c 96 63 40 08 00:08:09.040 READ FPDMA QUEUED
  161. 60 01 90 1b 96 63 40 08 00:08:09.040 READ FPDMA QUEUED
  162. 60 01 88 1e 96 63 40 08 00:08:09.040 READ FPDMA QUEUED
  163. 60 01 80 1d 96 63 40 08 00:08:09.040 READ FPDMA QUEUED
  164. ef 10 02 00 00 00 a0 08 00:08:09.040 SET FEATURES [Enable SATA feature]
  165.  
  166. Error 12421 occurred at disk power-on lifetime: 252 hours (10 days + 12 hours)
  167. When the command that caused the error occurred, the device was active or idle.
  168.  
  169. After command completion occurred, registers were:
  170. ER ST SC SN CL CH DH
  171. -- -- -- -- -- -- --
  172. 40 41 01 1f 96 63 00 Error: UNC at LBA = 0x0063961f = 6526495
  173.  
  174. Commands leading to the command that caused the error were:
  175. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  176. -- -- -- -- -- -- -- -- ---------------- --------------------
  177. 60 01 08 1b 96 63 40 08 00:08:06.096 READ FPDMA QUEUED
  178. 60 01 00 1c 96 63 40 08 00:08:06.096 READ FPDMA QUEUED
  179. 60 01 f0 1d 96 63 40 08 00:08:06.096 READ FPDMA QUEUED
  180. 60 01 e8 1e 96 63 40 08 00:08:06.096 READ FPDMA QUEUED
  181. 60 01 e0 1f 96 63 40 08 00:08:06.096 READ FPDMA QUEUED
  182.  
  183. SMART Self-test log structure revision number 1
  184. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  185. # 1 Short offline Completed: unknown failure 90% 251 0
  186. # 2 Short offline Completed: read failure 90% 234 8294208
  187. # 3 Extended offline Interrupted (host reset) 60% 3 -
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!