Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpuset
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <5>[ 0.000000] Linux version 3.18.31-ElementalX-OP3-2.09-los (aaron@bella) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Mar 28 19:28:35 EDT 2017
- <4>[ 0.000000] CPU: AArch64 Processor [511f2112] revision 2
- <6>[ 0.000000] alternatives: detected feature GIC system register CPU interface
- <6>[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP
- <6>[ 0.000000] efi: Getting EFI parameters from FDT:
- <6>[ 0.000000] efi: UEFI not found.
- <6>[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
- <6>[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
- <6>[ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
- <6>[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
- <6>[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
- <6>[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
- <6>[ 0.000000] Reserved memory: reserved region for node 'ramoops_region@0': base 0x00000000ac000000, size 1 MiB
- <6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
- <6>[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
- <6>[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
- <6>[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
- <6>[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
- <6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
- <6>[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
- <6>[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
- <6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
- <6>[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
- <6>[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
- <6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
- <6>[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
- <6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
- <6>[ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
- <6>[ 0.000000] Removed memory: created DMA memory pool at 0x00000000ac000000, size 1 MiB
- <6>[ 0.000000] Reserved memory: initialized node ramoops_region@0, compatible id removed-dma-pool
- <6>[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
- <7>[ 0.000000] On node 0 totalpages: 1513664
- <7>[ 0.000000] DMA zone: 11520 pages used for memmap
- <7>[ 0.000000] DMA zone: 0 pages reserved
- <7>[ 0.000000] DMA zone: 737280 pages, LIFO batch:31
- <7>[ 0.000000] Normal zone: 12131 pages used for memmap
- <7>[ 0.000000] Normal zone: 776384 pages, LIFO batch:31
- <6>[ 0.000000] psci: probing for conduit method from DT.
- <6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
- <6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
- <6>[ 0.000000] psci: Initializing psci_cpu_init
- <6>[ 0.000000] psci: Initializing psci_cpu_init
- <6>[ 0.000000] psci: Initializing psci_cpu_init
- <6>[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc17d68b000 s20800 r0 d32448 u53248
- <7>[ 0.000000] pcpu-alloc: s20800 r0 d32448 u53248 alloc=13*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490013
- <5>[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 cmdline = androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff cpu_max_c1=1593600 cpu_max_c2=2150400 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=852378fd androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi androidboot.mode=reboot androidboot.project_name=15801 androidboot.rf_version=21 androidboot.hw_version=16 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001580206918032900007002 androidboot.enable_dm_verity=1 androidboot.secboot=enabled androidboot.angela=disabled androidboot.nobatt=0 androidboot.rpmb_enable=true
- <4>[ 0.000000] cpu_max_c1=1593600
- <4>[ 0.000000] cpu_max_c2=2150400
- <6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- <4>[ 0.000000] Memory: 5680340K/6054656K available (17261K kernel code, 2360K rwdata, 7692K rodata, 532K init, 3128K bss, 374316K reserved)
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
- <5>[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
- <5>[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc5f63000 ( 95 MB actual)
- <5>[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
- <5>[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
- <5>[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- <5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc17d8c0000 ( 6104 MB)
- <5>[ 0.000000] .init : 0xffffffc0018e1000 - 0xffffffc001966000 ( 532 KB)
- <5>[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0018e0624 ( 24962 KB)
- <5>[ 0.000000] .data : 0xffffffc001982000 - 0xffffffc001bd0200 ( 2361 KB)
- <6>[ 0.000000] SLUB: HWalign=128, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000] HMP scheduling enabled.
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- <6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
- <6>[ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
- <4>[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
- <3>[ 0.000000] MPM 1 irq mapping errored -517
- <6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- <6>[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- <6>[ 0.000019] Switched to clocksource arch_sys_counter
- <6>[ 0.002605] allocated 25165824 bytes of page_cgroup
- <6>[ 0.002617] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <6>[ 0.002633] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
- <6>[ 0.002644] pid_max: default: 32768 minimum: 301
- <6>[ 0.002713] Security Framework initialized
- <6>[ 0.002739] SELinux: Initializing.
- <7>[ 0.002771] SELinux: Starting in permissive mode
- <6>[ 0.002807] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.002816] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.003458] Initializing cgroup subsys memory
- <6>[ 0.003484] Initializing cgroup subsys freezer
- <6>[ 0.003496] Initializing cgroup subsys bfqio
- <4>[ 0.003803] /cpus/cpu@0: Unknown CPU type
- <4>[ 0.003815] /cpus/cpu@1: Unknown CPU type
- <4>[ 0.003826] /cpus/cpu@100: Unknown CPU type
- <4>[ 0.003839] /cpus/cpu@101: Unknown CPU type
- <6>[ 0.003866] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
- <6>[ 0.003887] EFI services will not be available.
- <4>[ 0.004021] NOHZ: local_softirq_pending 02
- <6>[ 0.012333] MSM Memory Dump base table set up
- <6>[ 0.012357] MSM Memory Dump apps data table set up
- <3>[ 0.012377] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
- <6>[ 0.013870] clock-cpu-8996: configuring clocks for the perf cluster
- <6>[ 0.014048] cpu_clock_8996_early_init: finished CPU clock configuration
- <6>[ 0.016260] CPU1: found redistributor 1 region 0:0x0000000009c40000
- <6>[ 0.018495] CPU2: found redistributor 100 region 0:0x0000000009c80000
- <6>[ 0.020567] CPU3: found redistributor 101 region 0:0x0000000009cc0000
- <6>[ 0.020735] Brought up 4 CPUs
- <6>[ 0.020754] SMP: Total of 4 processors activated.
- <6>[ 0.023902] DMI not present or invalid.
- <6>[ 0.031579] pinctrl core: initialized pinctrl subsystem
- <6>[ 0.031996] regulator-dummy: no parameters
- <6>[ 0.097210] NET: Registered protocol family 16
- <6>[ 0.103452] cpuidle: using governor ladder
- <6>[ 0.116821] cpuidle: using governor menu
- <6>[ 0.133416] cpuidle: using governor qcom
- <6>[ 0.134251] vdso: 2 pages (1 code @ ffffffc001159000, 1 data @ ffffffc001988000)
- <6>[ 0.134669] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc0bfc00000-ffffffc0bfffffff]
- <6>[ 0.135656] DMA: preallocated 256 KiB pool for atomic allocations
- <6>[ 0.151980] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
- <6>[ 0.153072] sps:sps is ready.
- <6>[ 0.153707] i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
- <6>[ 0.154484] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
- <6>[ 0.154790] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
- <6>[ 0.155101] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
- <4>[ 0.155514] irq: no irq domain found for /soc/pinctrl@01010000 !
- <3>[ 0.157438] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- <3>[ 0.183173] smd_channel_probe_now: allocation table not initialized
- <3>[ 0.183547] smd_channel_probe_now: allocation table not initialized
- <3>[ 0.183862] smd_channel_probe_now: allocation table not initialized
- <3>[ 0.184178] smd_channel_probe_now: allocation table not initialized
- <6>[ 0.184467] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
- <6>[ 0.184791] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
- <6>[ 0.185636] msm_rpm_dev_probe: APSS-RPM communication over GLINK
- <3>[ 0.195245] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- <3>[ 0.197359] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
- <6>[ 0.203348] pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
- <6>[ 0.204042] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
- <6>[ 0.204346] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
- <6>[ 0.204831] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
- <6>[ 0.205255] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
- <6>[ 0.208333] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.208352] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.208376] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.208390] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <6>[ 0.208457] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- <3>[ 0.208465] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.208476] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- <3>[ 0.208485] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- <6>[ 0.214180] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
- <3>[ 0.218295] smd_channel_probe_now: allocation table not initialized
- <6>[ 0.218548] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
- <6>[ 0.219298] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
- <6>[ 0.219415] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
- <6>[ 0.219607] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
- <6>[ 0.219926] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
- <6>[ 0.222255] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.222670] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.223064] apcc_l3_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.223498] gfx_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.223972] kryo0-retention: 468 <--> 892 mV at 520 mV
- <6>[ 0.224192] kryo0: 468 <--> 892 mV at 754 mV
- <6>[ 0.224356] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
- <6>[ 0.224724] kryo1-retention: 468 <--> 892 mV at 520 mV
- <6>[ 0.224943] kryo1: 468 <--> 892 mV at 754 mV
- <6>[ 0.225093] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
- <6>[ 0.230518] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
- <3>[ 0.232107] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- <4>[ 0.255074] __of_mpm_init(): MPM driver mapping exists
- <6>[ 0.256403] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
- <3>[ 0.256496] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.256509] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
- <6>[ 0.258135] console [pstore0] enabled
- <6>[ 0.258250] pstore: Registered ramoops as persistent store backend
- <6>[ 0.258264] ramoops: attached 0x100000@0xac000000, ecc: 0/0
- <6>[ 0.259517] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
- <3>[ 0.259595] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.259611] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
- <6>[ 0.259921] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- <3>[ 0.259982] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.259996] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
- <6>[ 0.260373] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- <3>[ 0.260432] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.260446] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
- <6>[ 0.260729] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- <3>[ 0.260787] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.260801] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
- <3>[ 0.260967] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- <6>[ 0.261800] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.262334] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.262769] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.263271] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.263750] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.264251] pm8994_s3: 1300 mV normal idle
- <6>[ 0.264748] pm8994_s4: 1800 mV normal idle
- <6>[ 0.265243] pm8994_s5: 2150 mV normal idle
- <6>[ 0.265737] pm8994_s7: 800 mV normal idle
- <6>[ 0.266239] pm8994_l1: 1000 mV normal idle
- <6>[ 0.266776] pm8994_l2: 1250 mV normal idle
- <6>[ 0.267516] pm8994_l3: 1100 mV normal idle
- <6>[ 0.268017] pm8994_l4: 1225 mV normal idle
- <6>[ 0.268518] pm8994_l6: 1200 mV normal idle
- <6>[ 0.269007] pm8994_l8: 1800 mV normal idle
- <6>[ 0.269503] pm8994_l9: 1800 mV normal idle
- <6>[ 0.269988] pm8994_l10: 1800 mV normal idle
- <6>[ 0.270526] pm8994_l11: 1150 mV normal idle
- <6>[ 0.271027] pm8994_l12: 1800 mV normal idle
- <6>[ 0.271877] pm8994_l13: 2950 mV normal idle
- <6>[ 0.272375] pm8994_l15: 1800 mV normal idle
- <6>[ 0.272880] pm8994_l16: 2700 mV normal idle
- <6>[ 0.273417] pm8994_l17: 2600 mV normal idle
- <6>[ 0.273907] pm8994_l18: 3300 mV normal idle
- <6>[ 0.274395] pm8994_l19: 3000 mV normal idle
- <6>[ 0.274894] pm8994_l20: 2950 mV normal idle
- <6>[ 0.275385] pm8994_l21: 2950 mV normal idle
- <6>[ 0.275875] pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
- <6>[ 0.276367] pm8994_l23: 2800 mV normal idle
- <6>[ 0.276901] pm8994_l24: 3075 mV normal idle
- <6>[ 0.277400] pm8994_l25: 1200 mV normal idle
- <6>[ 0.278179] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.278602] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.279106] pm8994_l27: 1200 mV normal idle
- <6>[ 0.279609] pm8994_l28: 925 mV normal idle
- <6>[ 0.280378] pm8994_l29: 2800 mV normal idle
- <6>[ 0.280863] pm8994_l30: 1800 mV normal idle
- <6>[ 0.281364] pm8994_l32: 1800 mV normal idle
- <6>[ 0.281850] pm8994_lvs1: no parameters
- <6>[ 0.282303] pm8994_lvs2: no parameters
- <6>[ 0.282754] pmi8994_s1: 1025 mV normal idle
- <6>[ 0.283249] pmi8994_boost_5v: no parameters
- <3>[ 0.283390] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.283499] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.283840] pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.283897] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.283990] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.284387] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
- <6>[ 0.284772] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
- <6>[ 0.285027] pm8994_s11_avs_limit: 470 <--> 1140 mV
- <6>[ 0.285154] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
- <6>[ 0.286058] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.286079] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.286093] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.286110] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.286127] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <6>[ 0.286480] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- <3>[ 0.286495] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.286509] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- <3>[ 0.286521] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- <3>[ 0.287106] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- <6>[ 0.287665] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
- <3>[ 0.287740] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.287755] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
- <6>[ 0.288112] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
- <3>[ 0.288173] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.288186] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
- <6>[ 0.288483] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- <3>[ 0.288543] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.288556] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
- <6>[ 0.288870] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- <3>[ 0.288930] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.288944] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
- <6>[ 0.289227] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- <3>[ 0.289287] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.289301] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
- <3>[ 0.289574] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- <6>[ 0.309750] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
- <6>[ 0.310783] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
- <6>[ 0.310809] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
- <6>[ 0.310824] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
- <6>[ 0.311207] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
- <6>[ 0.311225] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
- <6>[ 0.311246] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
- <6>[ 0.311652] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
- <6>[ 0.311668] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
- <6>[ 0.311679] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
- <6>[ 0.321424] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
- <6>[ 0.323326] pmi8994_boost_5v: no parameters
- <3>[ 0.323532] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.323644] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.323907] pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.323991] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.324088] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.325007] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.325029] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.325043] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.325058] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.325074] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <6>[ 0.325348] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- <3>[ 0.325365] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.325379] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- <3>[ 0.325391] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- <6>[ 0.326042] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
- <6>[ 0.326060] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
- <6>[ 0.326071] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
- <6>[ 0.326082] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
- <6>[ 0.326093] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
- <6>[ 0.326107] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- <6>[ 0.326336] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- <6>[ 0.326558] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 575000 uV
- <6>[ 0.326572] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV
- <6>[ 0.326584] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 785000 uV
- <6>[ 0.326594] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 890000 uV
- <6>[ 0.326773] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 351
- <6>[ 0.326787] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 524, quot_offset[ 7]= 130
- <6>[ 0.326799] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 778, quot_offset[ 7]= 250
- <6>[ 0.326809] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 975, quot_offset[ 7]= 195
- <6>[ 0.326959] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
- <6>[ 0.326971] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
- <6>[ 0.326982] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
- <6>[ 0.326993] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
- <6>[ 0.327004] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
- <6>[ 0.327017] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- <6>[ 0.327168] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 575000 uV
- <6>[ 0.327179] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV
- <6>[ 0.327190] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 785000 uV
- <6>[ 0.327200] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 890000 uV
- <6>[ 0.327251] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 351
- <6>[ 0.327262] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 524, quot_offset[ 7]= 130
- <6>[ 0.327273] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 778, quot_offset[ 7]= 250
- <6>[ 0.327283] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 975, quot_offset[ 7]= 195
- <6>[ 0.327410] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
- <6>[ 0.327422] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
- <6>[ 0.327432] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
- <6>[ 0.327443] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
- <6>[ 0.327454] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
- <6>[ 0.327466] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- <6>[ 0.327777] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- <6>[ 0.328028] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 565000 uV
- <6>[ 0.328041] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 645000 uV
- <6>[ 0.328051] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 715000 uV
- <6>[ 0.328061] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 950000 uV
- <6>[ 0.328189] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 335
- <6>[ 0.328201] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 480, quot_offset[ 7]= 105
- <6>[ 0.328212] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 630, quot_offset[ 7]= 150
- <6>[ 0.328224] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1086, quot_offset[ 7]= 455
- <6>[ 0.328702] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
- <6>[ 0.328874] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.329132] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.332717] cpr3_regulator_measure_aging: apcc: average quotient delta=-28 (count=10)
- <6>[ 0.332747] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=0 uV
- <6>[ 0.333337] apc1_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.335074] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
- <6>[ 0.335091] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
- <6>[ 0.335453] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 610000 uV
- <6>[ 0.335464] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
- <6>[ 0.335475] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 795000 uV
- <6>[ 0.335485] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 885000 uV
- <6>[ 0.335665] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
- <6>[ 0.335810] gfx_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.337282] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
- <3>[ 0.337376] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.337392] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- <6>[ 0.338283] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
- <3>[ 0.338367] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.338381] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.339235] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- <3>[ 0.339318] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.339332] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- <6>[ 0.340291] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- <3>[ 0.340373] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.340386] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.341284] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- <3>[ 0.341366] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.341380] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.342475] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
- <6>[ 0.344911] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu0
- <6>[ 0.344955] clock-cpu-8996: set OPP pair (1728000000 Hz, 865000 uv) on cpu0
- <6>[ 0.344980] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu1
- <6>[ 0.345022] clock-cpu-8996: set OPP pair (1728000000 Hz, 865000 uv) on cpu1
- <6>[ 0.345044] clock-cpu-8996: set OPP pair (307200000 Hz, 585000 uv) on cpu2
- <6>[ 0.345104] clock-cpu-8996: set OPP pair (2265600000 Hz, 935000 uv) on cpu2
- <6>[ 0.345125] clock-cpu-8996: set OPP pair (307200000 Hz, 585000 uv) on cpu3
- <6>[ 0.345180] clock-cpu-8996: set OPP pair (2265600000 Hz, 935000 uv) on cpu3
- <6>[ 0.345318] clock-cpu-8996: set OPP pair (307200000 Hz, 620000 uv) on soc:qcom,m4m
- <6>[ 0.345360] clock-cpu-8996: set OPP pair (1593600000 Hz, 865000 uv) on soc:qcom,m4m
- <6>[ 0.345758] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
- <6>[ 0.346146] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 540000 uV) on b00000.qcom,kgsl-3d0
- <6>[ 0.346173] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 885000 uV) on b00000.qcom,kgsl-3d0
- <6>[ 0.347640] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
- <6>[ 0.347904] pmi8994_boost_5v: no parameters
- <3>[ 0.347981] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.348086] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.348316] pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.348371] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.348465] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.349319] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.349338] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.349352] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.349369] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.349385] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <3>[ 0.349667] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- <3>[ 0.349684] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <3>[ 0.349697] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <3>[ 0.349717] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
- <3>[ 0.350858] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- <3>[ 0.350875] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <3>[ 0.350889] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <6>[ 0.351079] pmi8994_boost_5v: no parameters
- <3>[ 0.351153] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.351256] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.351487] pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.351542] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.351634] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.395183] KPI: Bootloader start count = 47504
- <6>[ 0.395202] KPI: Bootloader end count = 139025
- <6>[ 0.395213] KPI: Bootloader display count = 116872
- <6>[ 0.395222] KPI: Bootloader load kernel count = 2201
- <6>[ 0.395235] KPI: Kernel MPM timestamp = 165949
- <6>[ 0.395245] KPI: Kernel MPM Clock frequency = 32768
- <6>[ 0.395268] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536
- <6>[ 0.395268] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=2265230377 num_pmics=2
- <6>[ 0.395589] gdsc_mmagic_bimc: no parameters
- <6>[ 0.396532] rome_vreg: no parameters
- <6>[ 0.396952] wlan_en_vreg: no parameters
- <6>[ 0.397808] vgaarb: loaded
- <5>[ 0.399721] SCSI subsystem initialized
- <6>[ 0.401234] usbcore: registered new interface driver usbfs
- <6>[ 0.401291] usbcore: registered new interface driver hub
- <6>[ 0.401480] usbcore: registered new device driver usb
- <4>[ 0.402033] soc:usb_nop_phy supply vcc not found, using dummy regulator
- <6>[ 0.402960] media: Linux media interface: v0.10
- <6>[ 0.403022] Linux video capture interface: v2.00
- <6>[ 0.430662] cpufreq: driver msm up and running
- <6>[ 0.431212] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_r
Add Comment
Please, Sign In to add comment