Guest User

Untitled

a guest
Jul 1st, 2012
71
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.2.17 (jetstream@1801-lin007) (gcc version 4.7.0 (GCC) ) #1 SMP Sat May 19 04:35:35 CEST 2012
  4. [ 0.000000] Command line: boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
  5. [ 0.000000] KERNEL supported cpus:
  6. [ 0.000000] Intel GenuineIntel
  7. [ 0.000000] BIOS-provided physical RAM map:
  8. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  9. [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  10. [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  11. [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
  12. [ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe9e000 (ACPI data)
  13. [ 0.000000] BIOS-e820: 000000007fe9e000 - 000000007fed0000 (ACPI NVS)
  14. [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee0000 (reserved)
  15. [ 0.000000] BIOS-e820: 000000007fee8000 - 0000000080000000 (reserved)
  16. [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  17. [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
  18. [ 0.000000] NX (Execute Disable) protection: active
  19. [ 0.000000] DMI present.
  20. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./NM10, BIOS 080016 07/28/2010
  21. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  22. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  23. [ 0.000000] last_pfn = 0x7fe90 max_arch_pfn = 0x400000000
  24. [ 0.000000] MTRR default type: uncachable
  25. [ 0.000000] MTRR fixed ranges enabled:
  26. [ 0.000000] 00000-9FFFF write-back
  27. [ 0.000000] A0000-BFFFF uncachable
  28. [ 0.000000] C0000-CFFFF write-protect
  29. [ 0.000000] D0000-DFFFF uncachable
  30. [ 0.000000] E0000-EFFFF write-through
  31. [ 0.000000] F0000-FFFFF write-protect
  32. [ 0.000000] MTRR variable ranges enabled:
  33. [ 0.000000] 0 base 000000000 mask F80000000 write-back
  34. [ 0.000000] 1 base 07FF00000 mask FFFF00000 write-through
  35. [ 0.000000] 2 disabled
  36. [ 0.000000] 3 disabled
  37. [ 0.000000] 4 disabled
  38. [ 0.000000] 5 disabled
  39. [ 0.000000] 6 disabled
  40. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  41. [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
  42. [ 0.000000] initial memory mapped : 0 - 20000000
  43. [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
  44. [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe90000
  45. [ 0.000000] 0000000000 - 007fe00000 page 2M
  46. [ 0.000000] 007fe00000 - 007fe90000 page 4k
  47. [ 0.000000] kernel direct mapping tables up to 7fe90000 @ 1fffc000-20000000
  48. [ 0.000000] ACPI: RSDP 00000000000f9a40 00014 (v00 ACPIAM)
  49. [ 0.000000] ACPI: RSDT 000000007fe90000 00038 (v01 072810 RSDT1715 20100728 MSFT 00000097)
  50. [ 0.000000] ACPI: FACP 000000007fe90200 00084 (v01 072810 FACP1715 20100728 MSFT 00000097)
  51. [ 0.000000] ACPI: DSDT 000000007fe90440 049E0 (v01 A155PB A155PB04 00000004 INTL 20051117)
  52. [ 0.000000] ACPI: FACS 000000007fe9e000 00040
  53. [ 0.000000] ACPI: APIC 000000007fe90390 0006C (v01 072810 APIC1715 20100728 MSFT 00000097)
  54. [ 0.000000] ACPI: MCFG 000000007fe90400 0003C (v01 072810 OEMMCFG 20100728 MSFT 00000097)
  55. [ 0.000000] ACPI: OEMB 000000007fe9e040 00082 (v01 072810 OEMB1715 20100728 MSFT 00000097)
  56. [ 0.000000] ACPI: HPET 000000007fe9a440 00038 (v01 072810 OEMHPET 20100728 MSFT 00000097)
  57. [ 0.000000] ACPI: Local APIC address 0xfee00000
  58. [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
  59. [ 0.000000] Zone PFN ranges:
  60. [ 0.000000] DMA 0x00000010 -> 0x00001000
  61. [ 0.000000] DMA32 0x00001000 -> 0x00100000
  62. [ 0.000000] Normal empty
  63. [ 0.000000] Movable zone start PFN for each node
  64. [ 0.000000] early_node_map[2] active PFN ranges
  65. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  66. [ 0.000000] 0: 0x00000100 -> 0x0007fe90
  67. [ 0.000000] On node 0 totalpages: 523807
  68. [ 0.000000] DMA zone: 64 pages used for memmap
  69. [ 0.000000] DMA zone: 5 pages reserved
  70. [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
  71. [ 0.000000] DMA32 zone: 8123 pages used for memmap
  72. [ 0.000000] DMA32 zone: 511701 pages, LIFO batch:31
  73. [ 0.000000] ACPI: PM-Timer IO Port: 0x808
  74. [ 0.000000] ACPI: Local APIC address 0xfee00000
  75. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  76. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  77. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
  78. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  79. [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  80. [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
  81. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  82. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  83. [ 0.000000] ACPI: IRQ0 used by override.
  84. [ 0.000000] ACPI: IRQ2 used by override.
  85. [ 0.000000] ACPI: IRQ9 used by override.
  86. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  87. [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
  88. [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
  89. [ 0.000000] nr_irqs_gsi: 40
  90. [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
  91. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  92. [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88007fc00000 s70464 r8192 d23744 u524288
  93. [ 0.000000] pcpu-alloc: s70464 r8192 d23744 u524288 alloc=1*2097152
  94. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  95. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515615
  96. [ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
  97. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  98. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  99. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  100. [ 0.000000] Memory: 2043552k/2095680k available (5985k kernel code, 452k absent, 51676k reserved, 2661k data, 6208k init)
  101. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  102. [ 0.000000] Hierarchical RCU implementation.
  103. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
  104. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  105. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
  106. [ 0.000000] Console: colour VGA+ 80x25
  107. [ 0.000000] console [tty0] enabled
  108. [ 0.000000] hpet clockevent registered
  109. [ 0.000000] Fast TSC calibration using PIT
  110. [ 0.000000] Detected 1795.467 MHz processor.
  111. [ 0.006672] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.55 BogoMIPS (lpj=5984890)
  112. [ 0.006680] pid_max: default: 32768 minimum: 301
  113. [ 0.006761] Mount-cache hash table entries: 256
  114. [ 0.006976] Initializing cgroup subsys cpuacct
  115. [ 0.006988] Initializing cgroup subsys freezer
  116. [ 0.007015] CPU: Physical Processor ID: 0
  117. [ 0.007018] CPU: Processor Core ID: 0
  118. [ 0.007022] using mwait in idle threads.
  119. [ 0.007063] ACPI: Core revision 20111123
  120. [ 0.016843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  121. [ 0.049849] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
  122. [ 0.049997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
  123. [ 0.049997] ... version: 3
  124. [ 0.049997] ... bit width: 40
  125. [ 0.049997] ... generic registers: 2
  126. [ 0.049997] ... value mask: 000000ffffffffff
  127. [ 0.049997] ... max period: 000000007fffffff
  128. [ 0.049997] ... fixed-purpose events: 3
  129. [ 0.049997] ... event mask: 0000000700000003
  130. [ 0.049997] Booting Node 0, Processors #1
  131. [ 0.049997] smpboot cpu 1: start_ip = 9a000
  132. [ 0.009999] calibrate_delay_direct() dropping max bogoMips estimate 4 = 15961473
  133. [ 0.009999] Disabled fast string operations
  134. [ 0.143504] #2
  135. [ 0.143510] smpboot cpu 2: start_ip = 9a000
  136. [ 0.009999] Disabled fast string operations
  137. [ 0.240157] #3 Ok.
  138. [ 0.240162] smpboot cpu 3: start_ip = 9a000
  139. [ 0.009999] Disabled fast string operations
  140. [ 0.336681] Brought up 4 CPUs
  141. [ 0.336691] Total of 4 processors activated (14370.54 BogoMIPS).
  142. [ 0.337974] devtmpfs: initialized
  143. [ 0.337974] NET: Registered protocol family 16
  144. [ 0.337974] ACPI: bus type pci registered
  145. [ 0.337974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  146. [ 0.337974] PCI: not using MMCONFIG
  147. [ 0.337974] PCI: Using configuration type 1 for base access
  148. [ 0.341314] bio: create slab <bio-0> at 0
  149. [ 0.341314] ACPI: Added _OSI(Module Device)
  150. [ 0.341314] ACPI: Added _OSI(Processor Device)
  151. [ 0.341314] ACPI: Added _OSI(3.0 _SCP Extensions)
  152. [ 0.341314] ACPI: Added _OSI(Processor Aggregator Device)
  153. [ 0.341674] ACPI: EC: Look up EC in DSDT
  154. [ 0.345040] ACPI: Executed 1 blocks of module-level executable AML code
  155. [ 0.349089] ACPI: Interpreter enabled
  156. [ 0.349099] ACPI: (supports S0 S3 S5)
  157. [ 0.349132] ACPI: Using IOAPIC for interrupt routing
  158. [ 0.349193] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  159. [ 0.350444] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  160. [ 0.393427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  161. [ 0.394219] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  162. [ 0.395284] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
  163. [ 0.395291] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
  164. [ 0.395296] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  165. [ 0.395302] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
  166. [ 0.395307] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
  167. [ 0.395312] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
  168. [ 0.395318] pci_root PNP0A08:00: host bridge window [mem 0x400000000-0xfffffffff]
  169. [ 0.395342] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
  170. [ 0.395431] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
  171. [ 0.395454] pci 0000:00:1b.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
  172. [ 0.395545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  173. [ 0.395553] pci 0000:00:1b.0: PME# disabled
  174. [ 0.395579] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
  175. [ 0.395672] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  176. [ 0.395680] pci 0000:00:1c.0: PME# disabled
  177. [ 0.395709] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
  178. [ 0.395801] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  179. [ 0.395808] pci 0000:00:1c.1: PME# disabled
  180. [ 0.395837] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
  181. [ 0.395930] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  182. [ 0.395937] pci 0000:00:1c.2: PME# disabled
  183. [ 0.395968] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
  184. [ 0.396017] pci 0000:00:1d.0: reg 20: [io 0xcc00-0xcc1f]
  185. [ 0.396059] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
  186. [ 0.396108] pci 0000:00:1d.1: reg 20: [io 0xc880-0xc89f]
  187. [ 0.396155] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
  188. [ 0.396204] pci 0000:00:1d.2: reg 20: [io 0xc800-0xc81f]
  189. [ 0.396246] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
  190. [ 0.396295] pci 0000:00:1d.3: reg 20: [io 0xc480-0xc49f]
  191. [ 0.396347] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
  192. [ 0.396370] pci 0000:00:1d.7: reg 10: [mem 0xfe8fbc00-0xfe8fbfff]
  193. [ 0.396459] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  194. [ 0.396466] pci 0000:00:1d.7: PME# disabled
  195. [ 0.396490] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
  196. [ 0.396575] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
  197. [ 0.396669] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
  198. [ 0.396724] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
  199. [ 0.396746] pci 0000:00:1f.2: reg 10: [io 0xb880-0xb887]
  200. [ 0.396759] pci 0000:00:1f.2: reg 14: [io 0xc400-0xc403]
  201. [ 0.396776] pci 0000:00:1f.2: reg 18: [io 0xc080-0xc087]
  202. [ 0.396791] pci 0000:00:1f.2: reg 1c: [io 0xc000-0xc003]
  203. [ 0.396804] pci 0000:00:1f.2: reg 20: [io 0xbc00-0xbc0f]
  204. [ 0.396817] pci 0000:00:1f.2: reg 24: [mem 0xfe8fb800-0xfe8fbbff]
  205. [ 0.396860] pci 0000:00:1f.2: PME# supported from D3hot
  206. [ 0.396867] pci 0000:00:1f.2: PME# disabled
  207. [ 0.396887] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
  208. [ 0.396940] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
  209. [ 0.397062] pci 0000:01:00.0: [1033:0194] type 0 class 0x000c03
  210. [ 0.397097] pci 0000:01:00.0: reg 10: [mem 0xfe9fe000-0xfe9fffff 64bit]
  211. [ 0.397262] pci 0000:01:00.0: PME# supported from D0 D3hot
  212. [ 0.397271] pci 0000:01:00.0: PME# disabled
  213. [ 0.403330] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
  214. [ 0.403341] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
  215. [ 0.403342] pci 0000:02:00.0: [1814:0781] type 0 class 0x000280
  216. [ 0.403367] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
  217. [ 0.403512] pci 0000:02:00.0: PME# supported from D0 D3hot
  218. [ 0.403520] pci 0000:02:00.0: PME# disabled
  219. [ 0.410103] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
  220. [ 0.410103] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
  221. [ 0.410103] pci 0000:03:00.0: [10de:0a64] type 0 class 0x000300
  222. [ 0.410107] pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
  223. [ 0.410130] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
  224. [ 0.410153] pci 0000:03:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
  225. [ 0.410169] pci 0000:03:00.0: reg 24: [io 0xdc00-0xdc7f]
  226. [ 0.410186] pci 0000:03:00.0: reg 30: [mem 0xfcf80000-0xfcffffff pref]
  227. [ 0.410304] pci 0000:03:00.1: [10de:0be3] type 0 class 0x000403
  228. [ 0.410324] pci 0000:03:00.1: reg 10: [mem 0xfcf7c000-0xfcf7ffff]
  229. [ 0.416664] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
  230. [ 0.416673] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
  231. [ 0.416680] pci 0000:00:1c.2: bridge window [mem 0xfcf00000-0xfdffffff]
  232. [ 0.416690] pci 0000:00:1c.2: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
  233. [ 0.416749] pci 0000:04:0b.0: [10ec:8167] type 0 class 0x000200
  234. [ 0.416749] pci 0000:04:0b.0: reg 10: [io 0xe800-0xe8ff]
  235. [ 0.416749] pci 0000:04:0b.0: reg 14: [mem 0xfebdfc00-0xfebdfcff]
  236. [ 0.416749] pci 0000:04:0b.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
  237. [ 0.416756] pci 0000:04:0b.0: supports D1 D2
  238. [ 0.416761] pci 0000:04:0b.0: PME# supported from D1 D2 D3hot D3cold
  239. [ 0.416768] pci 0000:04:0b.0: PME# disabled
  240. [ 0.416802] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
  241. [ 0.416809] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
  242. [ 0.416816] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
  243. [ 0.416831] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  244. [ 0.416837] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  245. [ 0.416842] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  246. [ 0.416848] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
  247. [ 0.416854] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
  248. [ 0.416859] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
  249. [ 0.416865] pci 0000:00:1e.0: bridge window [mem 0x400000000-0xfffffffff] (subtractive decode)
  250. [ 0.416892] pci_bus 0000:00: on NUMA node 0
  251. [ 0.416901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  252. [ 0.417063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  253. [ 0.417156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  254. [ 0.417225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
  255. [ 0.417292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
  256. [ 0.417651] pci0000:00: Requesting ACPI _OSC control (0x1d)
  257. [ 0.418089] pci0000:00: ACPI _OSC control (0x1d) granted
  258. [ 0.427969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
  259. [ 0.428080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
  260. [ 0.428186] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
  261. [ 0.428291] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 *15)
  262. [ 0.428396] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  263. [ 0.428502] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  264. [ 0.428608] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  265. [ 0.428714] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 *14 15)
  266. [ 0.428860] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
  267. [ 0.428860] vgaarb: loaded
  268. [ 0.428860] vgaarb: bridge control possible 0000:03:00.0
  269. [ 0.428860] SCSI subsystem initialized
  270. [ 0.429202] libata version 3.00 loaded.
  271. [ 0.429202] usbcore: registered new interface driver usbfs
  272. [ 0.429202] usbcore: registered new interface driver hub
  273. [ 0.429202] usbcore: registered new device driver usb
  274. [ 0.429202] PCI: Using ACPI for IRQ routing
  275. [ 0.437702] PCI: pci_cache_line_size set to 64 bytes
  276. [ 0.437805] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  277. [ 0.437810] reserve RAM buffer: 000000007fe90000 - 000000007fffffff
  278. [ 0.438204] cfg80211: Calling CRDA to update world regulatory domain
  279. [ 0.438204] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  280. [ 0.446771] Switching to clocksource hpet
  281. [ 0.446771] pnp: PnP ACPI init
  282. [ 0.446774] ACPI: bus type pnp registered
  283. [ 0.447341] pnp 00:00: [bus 00-ff]
  284. [ 0.447347] pnp 00:00: [io 0x0cf8-0x0cff]
  285. [ 0.447352] pnp 00:00: [io 0x0000-0x0cf7 window]
  286. [ 0.447357] pnp 00:00: [io 0x0d00-0xffff window]
  287. [ 0.447362] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  288. [ 0.447367] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  289. [ 0.447372] pnp 00:00: [mem 0x80000000-0xdfffffff window]
  290. [ 0.447377] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
  291. [ 0.447383] pnp 00:00: [mem 0x400000000-0xfffffffff window]
  292. [ 0.447465] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  293. [ 0.447490] pnp 00:01: [mem 0xfed14000-0xfed19fff]
  294. [ 0.447495] pnp 00:01: [mem 0xfed90000-0xfed93fff]
  295. [ 0.447573] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
  296. [ 0.447580] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
  297. [ 0.447588] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  298. [ 0.447657] pnp 00:02: [dma 4]
  299. [ 0.447662] pnp 00:02: [io 0x0000-0x000f]
  300. [ 0.447667] pnp 00:02: [io 0x0081-0x0083]
  301. [ 0.447671] pnp 00:02: [io 0x0087]
  302. [ 0.447675] pnp 00:02: [io 0x0089-0x008b]
  303. [ 0.447679] pnp 00:02: [io 0x008f]
  304. [ 0.447683] pnp 00:02: [io 0x00c0-0x00df]
  305. [ 0.447729] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  306. [ 0.447755] pnp 00:03: [io 0x0070-0x0071]
  307. [ 0.447772] pnp 00:03: [irq 8]
  308. [ 0.447821] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  309. [ 0.447842] pnp 00:04: [io 0x0061]
  310. [ 0.447888] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  311. [ 0.447910] pnp 00:05: [io 0x00f0-0x00ff]
  312. [ 0.447921] pnp 00:05: [irq 13]
  313. [ 0.447970] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  314. [ 0.448378] pnp 00:06: [io 0x0010-0x001f]
  315. [ 0.448383] pnp 00:06: [io 0x0022-0x003f]
  316. [ 0.448388] pnp 00:06: [io 0x0044-0x005f]
  317. [ 0.448392] pnp 00:06: [io 0x0062-0x0063]
  318. [ 0.448396] pnp 00:06: [io 0x0065-0x006f]
  319. [ 0.448401] pnp 00:06: [io 0x0072-0x007f]
  320. [ 0.448405] pnp 00:06: [io 0x0080]
  321. [ 0.448409] pnp 00:06: [io 0x0084-0x0086]
  322. [ 0.448413] pnp 00:06: [io 0x0088]
  323. [ 0.448417] pnp 00:06: [io 0x008c-0x008e]
  324. [ 0.448421] pnp 00:06: [io 0x0090-0x009f]
  325. [ 0.448425] pnp 00:06: [io 0x00a2-0x00bf]
  326. [ 0.448430] pnp 00:06: [io 0x00e0-0x00ef]
  327. [ 0.448437] pnp 00:06: [io 0x04d0-0x04d1]
  328. [ 0.448441] pnp 00:06: [io 0x0800-0x087f]
  329. [ 0.448446] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
  330. [ 0.448451] pnp 00:06: [io 0x0480-0x04bf]
  331. [ 0.448456] pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
  332. [ 0.448460] pnp 00:06: [mem 0xfed20000-0xfed8ffff]
  333. [ 0.448571] system 00:06: [io 0x04d0-0x04d1] has been reserved
  334. [ 0.448578] system 00:06: [io 0x0800-0x087f] has been reserved
  335. [ 0.448583] system 00:06: [io 0x0480-0x04bf] has been reserved
  336. [ 0.448590] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
  337. [ 0.448596] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
  338. [ 0.448604] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  339. [ 0.448729] pnp 00:07: [mem 0xfed00000-0xfed003ff]
  340. [ 0.448784] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
  341. [ 0.448972] pnp 00:08: [io 0x0060]
  342. [ 0.448977] pnp 00:08: [io 0x0064]
  343. [ 0.448982] pnp 00:08: [mem 0xfec00000-0xfec00fff]
  344. [ 0.448987] pnp 00:08: [mem 0xfee00000-0xfee00fff]
  345. [ 0.449065] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
  346. [ 0.449072] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
  347. [ 0.449079] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  348. [ 0.449262] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
  349. [ 0.449269] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
  350. [ 0.449274] pnp 00:09: [io 0x0a10-0x0a1f]
  351. [ 0.449353] system 00:09: [io 0x0a10-0x0a1f] has been reserved
  352. [ 0.449361] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  353. [ 0.449442] pnp 00:0a: [mem 0xe0000000-0xefffffff]
  354. [ 0.449519] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  355. [ 0.449527] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  356. [ 0.449886] pnp 00:0b: [mem 0x00000000-0x0009ffff]
  357. [ 0.449893] pnp 00:0b: [mem 0x000c0000-0x000cffff]
  358. [ 0.449900] pnp 00:0b: [mem 0x000e0000-0x000fffff]
  359. [ 0.449906] pnp 00:0b: [mem 0x00100000-0x7fffffff]
  360. [ 0.449914] pnp 00:0b: [mem 0xfed90000-0xffffffff]
  361. [ 0.450046] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  362. [ 0.450054] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
  363. [ 0.450060] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
  364. [ 0.450066] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
  365. [ 0.450072] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
  366. [ 0.450080] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
  367. [ 0.450369] pnp: PnP ACPI: found 12 devices
  368. [ 0.450374] ACPI: ACPI bus type pnp unregistered
  369. [ 0.459789] PCI: max bus depth: 1 pci_try_num: 2
  370. [ 0.459847] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
  371. [ 0.459856] pci 0000:00:1c.1: BAR 7: assigned [io 0x1000-0x1fff]
  372. [ 0.459864] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
  373. [ 0.459871] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
  374. [ 0.459877] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
  375. [ 0.459883] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
  376. [ 0.459892] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
  377. [ 0.459899] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
  378. [ 0.459910] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
  379. [ 0.459915] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
  380. [ 0.459924] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
  381. [ 0.459931] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref]
  382. [ 0.459942] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
  383. [ 0.459948] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
  384. [ 0.459956] pci 0000:00:1c.2: bridge window [mem 0xfcf00000-0xfdffffff]
  385. [ 0.459964] pci 0000:00:1c.2: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
  386. [ 0.459974] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
  387. [ 0.459979] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
  388. [ 0.459988] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
  389. [ 0.460023] pci 0000:00:1c.0: enabling device (0106 -> 0107)
  390. [ 0.460056] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  391. [ 0.460065] pci 0000:00:1c.0: setting latency timer to 64
  392. [ 0.460076] pci 0000:00:1c.1: enabling device (0106 -> 0107)
  393. [ 0.460091] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  394. [ 0.460098] pci 0000:00:1c.1: setting latency timer to 64
  395. [ 0.460116] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  396. [ 0.460124] pci 0000:00:1c.2: setting latency timer to 64
  397. [ 0.460135] pci 0000:00:1e.0: setting latency timer to 64
  398. [ 0.460142] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  399. [ 0.460147] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  400. [ 0.460153] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  401. [ 0.460158] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  402. [ 0.460163] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
  403. [ 0.460168] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
  404. [ 0.460174] pci_bus 0000:00: resource 10 [mem 0x400000000-0xfffffffff]
  405. [ 0.460179] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
  406. [ 0.460184] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
  407. [ 0.460190] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
  408. [ 0.460195] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
  409. [ 0.460200] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
  410. [ 0.460206] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
  411. [ 0.460212] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
  412. [ 0.460217] pci_bus 0000:03: resource 1 [mem 0xfcf00000-0xfdffffff]
  413. [ 0.460222] pci_bus 0000:03: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
  414. [ 0.460228] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
  415. [ 0.460233] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
  416. [ 0.460238] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
  417. [ 0.460243] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
  418. [ 0.460248] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
  419. [ 0.460253] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
  420. [ 0.460259] pci_bus 0000:04: resource 8 [mem 0x80000000-0xdfffffff]
  421. [ 0.460264] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff]
  422. [ 0.460269] pci_bus 0000:04: resource 10 [mem 0x400000000-0xfffffffff]
  423. [ 0.460335] NET: Registered protocol family 2
  424. [ 0.460437] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  425. [ 0.460980] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  426. [ 0.463628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  427. [ 0.464267] TCP: Hash tables configured (established 262144 bind 65536)
  428. [ 0.464274] TCP reno registered
  429. [ 0.464282] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  430. [ 0.464313] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  431. [ 0.464506] NET: Registered protocol family 1
  432. [ 0.464738] RPC: Registered named UNIX socket transport module.
  433. [ 0.464744] RPC: Registered udp transport module.
  434. [ 0.464748] RPC: Registered tcp transport module.
  435. [ 0.464751] RPC: Registered tcp NFSv4.1 backchannel transport module.
  436. [ 0.464819] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  437. [ 0.464841] pci 0000:00:1d.0: PCI INT A disabled
  438. [ 0.464863] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  439. [ 0.464883] pci 0000:00:1d.1: PCI INT B disabled
  440. [ 0.464897] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  441. [ 0.464916] pci 0000:00:1d.2: PCI INT C disabled
  442. [ 0.464929] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  443. [ 0.464948] pci 0000:00:1d.3: PCI INT D disabled
  444. [ 0.464962] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  445. [ 0.464998] pci 0000:00:1d.7: PCI INT A disabled
  446. [ 0.465028] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  447. [ 0.465062] pci 0000:01:00.0: PCI INT A disabled
  448. [ 0.465097] pci 0000:03:00.0: Boot video device
  449. [ 0.465123] PCI: CLS 32 bytes, default 64
  450. [ 0.500802] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  451. [ 0.501338] fuse init (API version 7.17)
  452. [ 0.501628] JFS: nTxBlock = 8192, nTxLock = 65536
  453. [ 0.505850] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  454. [ 0.506796] msgmni has been set to 3991
  455. [ 0.507794] alg: No test for stdrng (krng)
  456. [ 0.520293] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  457. [ 0.520419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  458. [ 0.520427] io scheduler noop registered
  459. [ 0.520498] io scheduler cfq registered (default)
  460. [ 0.520639] pcieport 0000:00:1c.0: setting latency timer to 64
  461. [ 0.520703] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
  462. [ 0.520861] pcieport 0000:00:1c.1: setting latency timer to 64
  463. [ 0.520915] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
  464. [ 0.521058] pcieport 0000:00:1c.2: setting latency timer to 64
  465. [ 0.521110] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
  466. [ 0.521386] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  467. [ 0.521393] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  468. [ 0.521401] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  469. [ 0.521492] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  470. [ 0.521498] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  471. [ 0.521505] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
  472. [ 0.521603] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  473. [ 0.521609] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  474. [ 0.521613] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
  475. [ 0.521621] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  476. [ 0.521718] intel_idle: MWAIT substates: 0x10
  477. [ 0.521740] intel_idle: v0.4 model 0x1C
  478. [ 0.521743] intel_idle: lapic_timer_reliable_states 0x2
  479. [ 0.521904] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  480. [ 0.521913] ACPI: Power Button [PWRB]
  481. [ 0.522004] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  482. [ 0.522012] ACPI: Power Button [PWRF]
  483. [ 0.524660] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  484. [ 0.687073] Linux agpgart interface v0.103
  485. [ 0.689795] brd: module loaded
  486. [ 0.691271] loop: module loaded
  487. [ 0.691898] nbd: registered device at major 43
  488. [ 0.694389] Loading iSCSI transport class v2.0-870.
  489. [ 0.694593] iscsi: registered transport (tcp)
  490. [ 0.694771] ata_piix 0000:00:1f.2: version 2.13
  491. [ 0.694796] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  492. [ 0.694805] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  493. [ 0.694862] ata_piix 0000:00:1f.2: setting latency timer to 64
  494. [ 0.695473] scsi0 : ata_piix
  495. [ 0.695642] scsi1 : ata_piix
  496. [ 0.697794] ata1: SATA max UDMA/133 cmd 0xb880 ctl 0xc400 bmdma 0xbc00 irq 19
  497. [ 0.697801] ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 19
  498. [ 0.698009] tun: Universal TUN/TAP device driver, 1.6
  499. [ 0.698014] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  500. [ 0.698151] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  501. [ 0.698156] e100: Copyright(c) 1999-2006 Intel Corporation
  502. [ 0.698192] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  503. [ 0.698196] e1000: Copyright (c) 1999-2006 Intel Corporation.
  504. [ 0.698231] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
  505. [ 0.698235] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
  506. [ 0.698291] jme: JMicron JMC2XX ethernet driver version 1.0.8
  507. [ 0.698358] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  508. [ 0.698395] r8169 0000:04:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  509. [ 0.698426] r8169 0000:04:0b.0: (unregistered net_device): not PCI Express
  510. [ 0.698770] r8169 0000:04:0b.0: eth0: RTL8169sc/8110sc at 0xffffc90000018c00, 00:01:2e:2d:64:e1, XID 18000000 IRQ 16
  511. [ 0.698777] r8169 0000:04:0b.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
  512. [ 0.698874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  513. [ 0.698905] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  514. [ 0.698928] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  515. [ 0.698934] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  516. [ 0.698947] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  517. [ 0.698985] ehci_hcd 0000:00:1d.7: using broken periodic workaround
  518. [ 0.698999] ehci_hcd 0000:00:1d.7: debug port 1
  519. [ 0.702898] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  520. [ 0.703021] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fbc00
  521. [ 0.716706] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  522. [ 0.716974] hub 1-0:1.0: USB hub found
  523. [ 0.716984] hub 1-0:1.0: 8 ports detected
  524. [ 0.717130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  525. [ 0.717159] uhci_hcd: USB Universal Host Controller Interface driver
  526. [ 0.717206] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  527. [ 0.717220] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  528. [ 0.717226] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  529. [ 0.717238] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  530. [ 0.717350] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
  531. [ 0.717615] hub 2-0:1.0: USB hub found
  532. [ 0.717625] hub 2-0:1.0: 2 ports detected
  533. [ 0.717737] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  534. [ 0.717750] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  535. [ 0.717756] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  536. [ 0.717766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  537. [ 0.717866] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
  538. [ 0.718124] hub 3-0:1.0: USB hub found
  539. [ 0.718133] hub 3-0:1.0: 2 ports detected
  540. [ 0.718246] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  541. [ 0.718259] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  542. [ 0.718265] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  543. [ 0.718276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  544. [ 0.718401] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
  545. [ 0.718680] hub 4-0:1.0: USB hub found
  546. [ 0.718689] hub 4-0:1.0: 2 ports detected
  547. [ 0.718804] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  548. [ 0.718817] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  549. [ 0.718823] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  550. [ 0.718837] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  551. [ 0.718961] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
  552. [ 0.719226] hub 5-0:1.0: USB hub found
  553. [ 0.719236] hub 5-0:1.0: 2 ports detected
  554. [ 0.719357] Initializing USB Mass Storage driver...
  555. [ 0.719415] usbcore: registered new interface driver usb-storage
  556. [ 0.719419] USB Mass Storage support registered.
  557. [ 0.719505] i8042: PNP: No PS/2 controller found. Probing ports directly.
  558. [ 0.722517] serio: i8042 KBD port at 0x60,0x64 irq 1
  559. [ 0.722538] serio: i8042 AUX port at 0x60,0x64 irq 12
  560. [ 0.722737] mousedev: PS/2 mouse device common for all mice
  561. [ 0.723118] rtc_cmos 00:03: RTC can wake from S4
  562. [ 0.723284] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  563. [ 0.723405] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  564. [ 0.723436] i2c /dev entries driver
  565. [ 0.723499] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  566. [ 0.723758] lirc_dev: IR Remote Control driver registered, major 252
  567. [ 0.723763] IR NEC protocol handler initialized
  568. [ 0.723767] IR RC5(x) protocol handler initialized
  569. [ 0.723770] IR RC6 protocol handler initialized
  570. [ 0.723773] IR JVC protocol handler initialized
  571. [ 0.723776] IR Sony protocol handler initialized
  572. [ 0.723779] IR RC5 (streamzap) protocol handler initialized
  573. [ 0.723782] IR MCE Keyboard/mouse protocol handler initialized
  574. [ 0.723909] cpuidle: using governor ladder
  575. [ 0.724103] cpuidle: using governor menu
  576. [ 0.724107] EFI Variables Facility v0.08 2004-May-17
  577. [ 0.724112] No iBFT detected.
  578. [ 0.724573] usbcore: registered new interface driver usbhid
  579. [ 0.724577] usbhid: USB HID core driver
  580. [ 0.724777] Netfilter messages via NETLINK v0.30.
  581. [ 0.725095] ip_tables: (C) 2000-2006 Netfilter Core Team
  582. [ 0.725128] TCP cubic registered
  583. [ 0.725366] NET: Registered protocol family 10
  584. [ 0.726299] ip6_tables: (C) 2000-2006 Netfilter Core Team
  585. [ 0.726329] NET: Registered protocol family 17
  586. [ 0.726349] lib80211: common routines for IEEE802.11 drivers
  587. [ 0.726354] lib80211_crypt: registered algorithm 'NULL'
  588. [ 0.726358] Registering the dns_resolver key type
  589. [ 0.734892] rtc_cmos 00:03: setting system clock to 2012-07-01 18:27:21 UTC (1341167241)
  590. [ 0.866987] ata1.00: ATA-8: OCZ-ONYX, 1.6, max UDMA/133
  591. [ 0.866994] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 0/32)
  592. [ 0.880311] ata1.00: configured for UDMA/133
  593. [ 0.880549] scsi 0:0:0:0: Direct-Access ATA OCZ-ONYX 1.6 PQ: 0 ANSI: 5
  594. [ 0.880893] sd 0:0:0:0: Attached scsi generic sg0 type 0
  595. [ 0.880969] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
  596. [ 0.881209] sd 0:0:0:0: [sda] Write Protect is off
  597. [ 0.881216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  598. [ 0.881290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  599. [ 0.882139] sda: sda1 sda2
  600. [ 0.882846] sd 0:0:0:0: [sda] Attached SCSI disk
  601. [ 0.888837] Freeing unused kernel memory: 6208k freed
  602. [ 0.892990] Write protecting the kernel read-only data: 8192k
  603. [ 0.894284] Freeing unused kernel memory: 152k freed
  604. [ 0.896892] Freeing unused kernel memory: 372k freed
  605. [ 1.003116] uvesafb: NVIDIA Corporation, GT218 Board - 06930000, Chip Rev , OEM: NVIDIA, VBE v3.0
  606. [ 1.076621] uvesafb: VBIOS/hardware doesn't support DDC transfers
  607. [ 1.076627] uvesafb: no monitor limits have been set, default refresh rate will be used
  608. [ 1.076711] usb 1-2: new high-speed USB device number 3 using ehci_hcd
  609. [ 1.077245] uvesafb: scrolling: redraw
  610. [ 1.208190] scsi2 : usb-storage 1-2:1.0
  611. [ 1.251045] Console: switching to colour frame buffer device 80x30
  612. [ 1.254790] uvesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010680000, using 6144k, total 14336k
  613. [ 1.254796] fb0: VESA VGA frame buffer device
  614. [ 1.257105] xhci_hcd 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  615. [ 1.257142] xhci_hcd 0000:01:00.0: setting latency timer to 64
  616. [ 1.257150] xhci_hcd 0000:01:00.0: xHCI Host Controller
  617. [ 1.257164] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
  618. [ 1.257443] xhci_hcd 0000:01:00.0: irq 16, io mem 0xfe9fe000
  619. [ 1.257594] xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X
  620. [ 1.257610] xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X
  621. [ 1.257623] xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
  622. [ 1.257636] xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X
  623. [ 1.257646] xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X
  624. [ 1.258298] xHCI xhci_add_endpoint called for root hub
  625. [ 1.258303] xHCI xhci_check_bandwidth called for root hub
  626. [ 1.258361] hub 6-0:1.0: USB hub found
  627. [ 1.258375] hub 6-0:1.0: 2 ports detected
  628. [ 1.258486] xhci_hcd 0000:01:00.0: xHCI Host Controller
  629. [ 1.258500] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7
  630. [ 1.260845] xHCI xhci_add_endpoint called for root hub
  631. [ 1.260850] xHCI xhci_check_bandwidth called for root hub
  632. [ 1.260914] hub 7-0:1.0: USB hub found
  633. [ 1.260930] hub 7-0:1.0: 2 ports detected
  634. [ 1.473375] Refined TSC clocksource calibration: 1795.702 MHz.
  635. [ 1.473386] Switching to clocksource tsc
  636. [ 1.486703] usb 2-1: new low-speed USB device number 2 using uhci_hcd
  637. [ 1.763666] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
  638. [ 1.790085] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
  639. [ 1.790543] generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
  640. [ 1.803597] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
  641. [ 1.827838] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  642. [ 1.860237] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  643. [ 1.883554] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  644. [ 1.941525] EXT4-fs (sda2): recovery complete
  645. [ 1.941676] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  646. [ 2.016704] usb 5-2: new low-speed USB device number 2 using uhci_hcd
  647. [ 2.201229] input: flirc.tv flirc as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input3
  648. [ 2.201440] generic-usb 0003:20A0:0001.0002: input,hidraw1: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-0000:00:1d.3-2/input0
  649. [ 2.212757] scsi 2:0:0:0: CD-ROM Slimtype DVD A DL8ATS XP5A PQ: 0 ANSI: 0
  650. [ 2.227615] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
  651. [ 2.227622] cdrom: Uniform CD-ROM driver Revision: 3.20
  652. [ 2.227849] sr 2:0:0:0: Attached scsi CD-ROM sr0
  653. [ 2.228029] sr 2:0:0:0: Attached scsi generic sg1 type 5
  654. >[ 2.590711] udevd[238]: starting version 182
  655. [ 2.737801] coretemp coretemp.0: Using relative temperature scale!
  656. [ 2.737837] coretemp coretemp.0: Using relative temperature scale!
  657. [ 2.813046] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  658. [ 2.813180] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
  659. [ 2.819552] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  660. [ 2.826329] rt2800pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  661. [ 2.826352] rt2800pci 0000:02:00.0: setting latency timer to 64
  662. [ 2.836942] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  663. [ 2.838300] Registered led device: rt2800pci-phy0::radio
  664. [ 2.838361] Registered led device: rt2800pci-phy0::assoc
  665. [ 2.838411] Registered led device: rt2800pci-phy0::quality
  666. [ 2.894298] hda_codec: ALC888: BIOS auto-probing.
  667. [ 2.899743] snd_hda_intel 0000:03:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  668. [ 2.899754] hda_intel: Disabling MSI
  669. [ 2.902123] snd_hda_intel 0000:03:00.1: setting latency timer to 64
  670. [ 3.056936] r8169 0000:04:0b.0: eth0: link down
  671. [ 3.057920] ADDRCONF(NETDEV_UP): eth0: link is not ready
  672. [ 3.059632] r8169 0000:04:0b.0: eth0: link down
  673. [ 3.399044] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
  674. [ 3.418261] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  675. [ 3.623404] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
  676. [ 3.650103] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
  677. [ 3.676719] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
  678. [ 3.698201] nvidia: module license 'NVIDIA' taints kernel.
  679. [ 3.698213] Disabling lock debugging due to kernel taint
  680. [ 3.703434] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  681. [ 3.717074] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input4
  682. [ 3.720425] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input5
  683. [ 3.720720] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input6
  684. [ 3.720970] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input7
  685. [ 4.524930] nvidia 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  686. [ 4.524947] nvidia 0000:03:00.0: setting latency timer to 64
  687. [ 4.524957] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  688. [ 4.525501] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.53 Fri May 11 23:28:10 PDT 2012
  689. [ 5.539379] r8169 0000:04:0b.0: eth0: link up
  690. [ 5.540573] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  691. [ 7.575544] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0
  692. [ 7.580029] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0
  693. [ 7.602065] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1
  694. [ 7.606694] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1
  695. [ 8.246695] HDMI: detected monitor SONY TV
  696. [ 8.246699] at connection type HDMI
  697. [ 8.246705] HDMI: available speakers: FL/FR
  698. [ 8.246714] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
  699. [ 9.215979] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0
  700. [ 9.237392] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
  701. [ 33.298643] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0
  702. [ 33.311452] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
  703. [ 34.466779] xhci_hcd 0000:01:00.0: remove, state 4
  704. [ 34.466795] usb usb7: USB disconnect, device number 1
  705. [ 34.467115] xHCI xhci_drop_endpoint called for root hub
  706. [ 34.467123] xHCI xhci_check_bandwidth called for root hub
  707. [ 34.485104] xhci_hcd 0000:01:00.0: USB bus 7 deregistered
  708. [ 34.485540] xhci_hcd 0000:01:00.0: remove, state 4
  709. [ 34.485564] usb usb6: USB disconnect, device number 1
  710. [ 34.485744] xHCI xhci_drop_endpoint called for root hub
  711. [ 34.485752] xHCI xhci_check_bandwidth called for root hub
  712. [ 34.486488] xhci_hcd 0000:01:00.0: USB bus 6 deregistered
  713. [ 34.486556] xhci_hcd 0000:01:00.0: PCI INT A disabled
  714. [ 35.043642] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0
  715. [ 35.050035] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
  716. [ 36.053652] PM: Syncing filesystems ... done.
  717. [ 36.054015] Freezing user space processes ... (elapsed 0.01 seconds) done.
  718. [ 36.066745] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  719. [ 36.080088] Suspending console(s) (use no_console_suspend to debug)
  720. [ 36.080709] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  721. [ 36.082825] rt2800pci 0000:02:00.0: PCI INT A disabled
  722. [ 36.082839] ACPI handle has no context!
  723. [ 36.096778] uhci_hcd 0000:00:1d.0: PCI INT A disabled
  724. [ 36.106706] ehci_hcd 0000:00:1d.7: PCI INT A disabled
  725. [ 36.116760] uhci_hcd 0000:00:1d.1: PCI INT B disabled
  726. [ 36.116770] uhci_hcd 0000:00:1d.2: PCI INT C disabled
  727. [ 36.132557] sd 0:0:0:0: [sda] Stopping disk
  728. [ 36.132731] uhci_hcd 0000:00:1d.3: PCI INT D disabled
  729. [ 36.183514] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
  730. [ 36.183552] ACPI handle has no context!
  731. [ 36.222661] ata_piix 0000:00:1f.2: PCI INT B disabled
  732. [ 36.520076] snd_hda_intel 0000:03:00.1: PCI INT A disabled
  733. [ 36.520140] ACPI handle has no context!
  734. [ 36.533422] PM: suspend of devices complete after 453.134 msecs
  735. [ 36.533651] r8169 0000:04:0b.0: PME# enabled
  736. [ 36.533673] pci 0000:00:1e.0: wake-up capability enabled by ACPI
  737. [ 36.546914] ehci_hcd 0000:00:1d.7: PME# enabled
  738. [ 36.546928] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
  739. [ 36.560107] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
  740. [ 36.560169] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
  741. [ 36.560228] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
  742. [ 36.560287] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
  743. [ 36.560332] PM: late suspend of devices complete after 26.903 msecs
  744. [ 36.560365] ACPI: Preparing to enter system sleep state S3
  745. [ 36.561370] PM: Saving platform NVS memory
  746. [ 36.561375] Disabling non-boot CPUs ...
  747. [ 36.663363] CPU 1 is now offline
  748. [ 36.766704] CPU 2 is now offline
  749. [ 36.870021] CPU 3 is now offline
  750. [ 36.870507] ACPI: Low-level resume complete
  751. [ 36.870507] PM: Restoring platform NVS memory
  752. [ 36.870507] Enabling non-boot CPUs ...
  753. [ 36.870507] Booting Node 0 Processor 1 APIC 0x2
  754. [ 36.870507] smpboot cpu 1: start_ip = 9a000
  755. [ 36.562803] Calibrating delay loop (skipped) already calibrated this CPU
  756. [ 36.903420] CPU1 is up
  757. [ 36.903566] Booting Node 0 Processor 2 APIC 0x1
  758. [ 36.903570] smpboot cpu 2: start_ip = 9a000
  759. [ 36.665278] Calibrating delay loop (skipped) already calibrated this CPU
  760. [ 36.936766] CPU2 is up
  761. [ 36.936934] Booting Node 0 Processor 3 APIC 0x3
  762. [ 36.936937] smpboot cpu 3: start_ip = 9a000
  763. [ 36.768618] Calibrating delay loop (skipped) already calibrated this CPU
  764. [ 36.970102] CPU3 is up
  765. [ 36.971206] ACPI: Waking up from system sleep state S3
  766. [ 36.972186] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
  767. [ 36.972196] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
  768. [ 36.972226] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x60100, writing 0x6010a)
  769. [ 36.972240] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80318021)
  770. [ 36.972248] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
  771. [ 36.972259] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  772. [ 36.972268] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
  773. [ 36.972316] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x60200, writing 0x6020b)
  774. [ 36.972329] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80118001)
  775. [ 36.972338] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
  776. [ 36.972349] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  777. [ 36.972357] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
  778. [ 36.972402] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x1a0300, writing 0x1a0305)
  779. [ 36.972422] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  780. [ 36.972430] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
  781. [ 36.972483] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  782. [ 36.972531] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
  783. [ 36.972558] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  784. [ 36.972601] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
  785. [ 36.972628] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  786. [ 36.972668] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
  787. [ 36.972695] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  788. [ 36.972736] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
  789. [ 36.972769] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
  790. [ 36.972790] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
  791. [ 36.972798] ehci_hcd 0000:00:1d.7: PME# disabled
  792. [ 36.972812] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x60000, writing 0x600ff)
  793. [ 36.972967] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
  794. [ 36.972997] pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfe9fe004)
  795. [ 36.973006] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
  796. [ 36.973017] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
  797. [ 36.973071] rt2800pci 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
  798. [ 36.973097] rt2800pci 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfeaf0000)
  799. [ 36.973106] rt2800pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
  800. [ 36.973116] rt2800pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  801. [ 36.973170] nvidia 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
  802. [ 36.973187] nvidia 0000:03:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xdc01)
  803. [ 36.973197] nvidia 0000:03:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xce00000c)
  804. [ 36.973207] nvidia 0000:03:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
  805. [ 36.973216] nvidia 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfd000000)
  806. [ 36.973227] nvidia 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  807. [ 36.973301] snd_hda_intel 0000:03:00.1: restoring config space at offset 0xf (was 0x100, writing 0x105)
  808. [ 36.973326] snd_hda_intel 0000:03:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xfcf7c000)
  809. [ 36.973366] snd_hda_intel 0000:03:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
  810. [ 36.973380] snd_hda_intel 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
  811. [ 36.973437] r8169 0000:04:0b.0: restoring config space at offset 0xf (was 0x40200100, writing 0x4020010a)
  812. [ 36.973447] r8169 0000:04:0b.0: restoring config space at offset 0xc (was 0x0, writing 0xfebe0000)
  813. [ 36.973461] r8169 0000:04:0b.0: restoring config space at offset 0x5 (was 0x0, writing 0xfebdfc00)
  814. [ 36.973468] r8169 0000:04:0b.0: restoring config space at offset 0x4 (was 0x1, writing 0xe801)
  815. [ 36.973476] r8169 0000:04:0b.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
  816. [ 36.973484] r8169 0000:04:0b.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00017)
  817. [ 36.973637] PM: early resume of devices complete after 1.521 msecs
  818. [ 36.973755] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  819. [ 36.973768] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  820. [ 36.973843] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
  821. [ 36.973883] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  822. [ 36.973903] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  823. [ 36.973921] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  824. [ 36.973938] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  825. [ 36.973953] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  826. [ 36.973965] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  827. [ 36.973979] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  828. [ 36.973995] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  829. [ 36.974010] usb usb2: root hub lost power or was reset
  830. [ 36.974025] usb usb3: root hub lost power or was reset
  831. [ 36.974040] usb usb4: root hub lost power or was reset
  832. [ 36.974055] usb usb5: root hub lost power or was reset
  833. [ 36.974071] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  834. [ 36.974088] pci 0000:00:1e.0: setting latency timer to 64
  835. [ 36.974103] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  836. [ 36.974122] rt2800pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  837. [ 36.974141] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  838. [ 36.974146] ata_piix 0000:00:1f.2: setting latency timer to 64
  839. [ 36.974163] snd_hda_intel 0000:03:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  840. [ 36.974175] snd_hda_intel 0000:03:00.1: setting latency timer to 64
  841. [ 36.974210] pci 0000:00:1e.0: wake-up capability disabled by ACPI
  842. [ 36.974223] r8169 0000:04:0b.0: PME# disabled
  843. [ 36.981919] sd 0:0:0:0: [sda] Starting disk
  844. [ 36.990173] r8169 0000:04:0b.0: eth0: link down
  845. [ 37.105832] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  846. [ 37.119177] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  847. [ 37.120001] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  848. [ 37.124502] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  849. [ 37.127169] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  850. [ 37.129837] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  851. [ 37.129843] hub 1-0:1.0: hub_port_status failed (err = -32)
  852. [ 37.144813] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (unknown) filtered out
  853. [ 37.144823] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out
  854. [ 37.146519] ata1.00: ACPI cmd c6/00:01:00:00:00:a0 (unknown) succeeded
  855. [ 37.146528] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
  856. [ 37.486711] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
  857. [ 37.563642] ata1.00: configured for UDMA/133
  858. [ 37.883366] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
  859. [ 38.044005] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
  860. [ 38.063821] PM: resume of devices complete after 1090.141 msecs
  861. [ 38.064092] Restarting tasks ...
  862. [ 38.064228] usb 5-2: USB disconnect, device number 2
  863. [ 38.070080] done.
  864. [ 38.100015] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  865. [ 38.103527] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  866. [ 38.105647] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  867. [ 38.106879] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  868. [ 38.110177] ehci_hcd 0000:00:1d.7: port 8 reset error -110
  869. [ 38.110230] hub 1-0:1.0: hub_port_status failed (err = -32)
  870. [ 38.271638] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0
  871. [ 38.277494] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0
  872. [ 38.385494] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1
  873. [ 38.390118] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1
  874. [ 38.436805] xhci_hcd 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  875. [ 38.436864] xhci_hcd 0000:01:00.0: setting latency timer to 64
  876. [ 38.436874] xhci_hcd 0000:01:00.0: xHCI Host Controller
  877. [ 38.436896] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
  878. [ 38.440386] xhci_hcd 0000:01:00.0: irq 16, io mem 0xfe9fe000
  879. [ 38.440598] xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X
  880. [ 38.440624] xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
  881. [ 38.440648] xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X
  882. [ 38.440665] xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X
  883. [ 38.440681] xhci_hcd 0000:01:00.0: irq 48 for MSI/MSI-X
  884. [ 38.447367] xHCI xhci_add_endpoint called for root hub
  885. [ 38.447376] xHCI xhci_check_bandwidth called for root hub
  886. [ 38.447476] hub 6-0:1.0: USB hub found
  887. [ 38.447498] hub 6-0:1.0: 2 ports detected
  888. [ 38.483459] xhci_hcd 0000:01:00.0: xHCI Host Controller
  889. [ 38.483515] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7
  890. [ 38.484086] xHCI xhci_add_endpoint called for root hub
  891. [ 38.484095] xHCI xhci_check_bandwidth called for root hub
  892. [ 38.484197] hub 7-0:1.0: USB hub found
  893. [ 38.484222] hub 7-0:1.0: 2 ports detected
  894. [ 39.030055] HDMI: detected monitor SONY TV
  895. [ 39.030060] at connection type HDMI
  896. [ 39.030068] HDMI: available speakers: FL/FR
  897. [ 39.030080] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
  898. [ 39.338191] r8169 0000:04:0b.0: eth0: link up
  899. [ 39.339068] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  900. [ 40.009842] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0
  901. [ 40.021677] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
RAW Paste Data