API tools faq
paste
Advertisement
teknoraver

lantiq-openwrt

teknoraver
Sep 27th, 2014
459
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.16 KB | None | 0 0
raw download clone embed print report
  1. ROM VER: 1.1.4
  2. CFG 05
  3.  
  4. DDR autotuning Rev 0.3ff
  5. DDR size from 0xa0000000 - 0xa3ffffff
  6. DDR check ok... start booting...
  7.  
  8.  
  9.  
  10. U-Boot 2010.06-LANTIQ-v-2.0.40-svn4469 (Aug 28 2013 - 09:28:56)
  11.  
  12. CLOCK CPU 500M RAM 250M
  13. DRAM: 64 MiB
  14. Using default environment
  15.  
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Net: Internal phy(GE) firmware version: 0x8434
  20. vr9 Switch8192 KiB W25Q64 at 0:3 is now current device
  21.  
  22.  
  23. Type "run flash_nfs" to mount root filesystem over NFS
  24.  
  25. Hit any key to stop autoboot: 0
  26. 8192 KiB W25Q64 at 0:3 is now current device
  27. 8192 KiB W25Q64 at 0:3 is now current device
  28. Uncompressing ...
  29. Starting kernel ...
  30.  
  31. [ 0.000000] Linux version 3.14.18 (matteo@raver) (gcc version 4.9.2 (OpenWrt/Linaro GCC 4.9-2014.10 r43004) ) #3 Sun Oct 26 20:54:36 CET 2014
  32. [ 0.000000] SoC: VR9 rev 1.2
  33. [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
  34. [ 0.000000] MIPS: machine is TDW8970 - TP-LINK TD-W8970
  35. [ 0.000000] Determined physical RAM map:
  36. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  37. [ 0.000000] Zone ranges:
  38. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  39. [ 0.000000] Movable zone start for each node
  40. [ 0.000000] Early memory node ranges
  41. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  42. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  43. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  44. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  45. [ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit panic=1
  46. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  49. [ 0.000000] Writing ErrCtl register=00011240
  50. [ 0.000000] Readback ErrCtl register=00011240
  51. [ 0.000000] Memory: 60412K/65536K available (3072K kernel code, 145K rwdata, 876K rodata, 176K init, 196K bss, 5124K reserved)
  52. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  53. [ 0.000000] NR_IRQS:256
  54. [ 0.000000] CPU Clock: 500MHz
  55. [ 0.028000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
  56. [ 0.032000] pid_max: default: 32768 minimum: 301
  57. [ 0.032000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  58. [ 0.032000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  59. [ 0.032000] pinctrl core: initialized pinctrl subsystem
  60. [ 0.036000] NET: Registered protocol family 16
  61. [ 0.044000] pinctrl-xway 1e100b10.pinmux: Init done
  62. [ 0.048000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
  63. [ 0.052000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
  64. [ 0.056000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_assert[185]
  65. [ 0.164000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_deassert[193]
  66. [ 0.164000] ath9k,eeprom ath9k_eep.8: failed to load eeprom address
  67. [ 0.180000] bio: create slab <bio-0> at 0
  68. [ 0.184000] usbcore: registered new interface driver usbfs
  69. [ 0.184000] usbcore: registered new interface driver hub
  70. [ 0.184000] usbcore: registered new device driver usb
  71. [ 0.188000] PCI host bridge to bus 0000:00
  72. [ 0.188000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
  73. [ 0.188000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
  74. [ 0.188000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  75. [ 0.188000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
  76. [ 0.200000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
  77. [ 0.200000] pci 0000:00:00.0: BAR 9: assigned [mem 0x1c100000-0x1c1fffff pref]
  78. [ 0.200000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c01ffff 64bit]
  79. [ 0.200000] pci 0000:01:00.0: BAR 6: assigned [mem 0x1c100000-0x1c10ffff pref]
  80. [ 0.200000] pci 0000:00:00.0: PCI bridge to [bus 01]
  81. [ 0.200000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
  82. [ 0.200000] pci 0000:00:00.0: bridge window [mem 0x1c100000-0x1c1fffff pref]
  83. [ 0.200000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
  84. [ 0.200000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
  85. [ 0.200000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
  86. [ 0.200000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
  87. [ 0.200000] Switched to clocksource MIPS
  88. [ 0.204000] NET: Registered protocol family 2
  89. [ 0.204000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  90. [ 0.204000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  91. [ 0.204000] TCP: Hash tables configured (established 1024 bind 1024)
  92. [ 0.204000] TCP: reno registered
  93. [ 0.204000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  94. [ 0.204000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  95. [ 0.204000] NET: Registered protocol family 1
  96. [ 0.204000] gptu: totally 6 16-bit timers/counters
  97. [ 0.208000] gptu: misc_register on minor 63
  98. [ 0.208000] gptu: succeeded to request irq 126
  99. [ 0.208000] gptu: succeeded to request irq 127
  100. [ 0.208000] gptu: succeeded to request irq 128
  101. [ 0.208000] gptu: succeeded to request irq 129
  102. [ 0.208000] gptu: succeeded to request irq 130
  103. [ 0.208000] gptu: succeeded to request irq 131
  104. [ 0.208000] phy-xrx200 gphy-xrx200.5: requesting lantiq/vr9_phy11g_a2x.bin
  105. [ 0.208000] phy-xrx200 gphy-xrx200.5: booting GPHY0 firmware at 38C0000
  106. [ 0.208000] phy-xrx200 gphy-xrx200.5: booting GPHY1 firmware at 38C0000
  107. [ 0.312000] futex hash table entries: 256 (order: -1, 3072 bytes)
  108. [ 0.336000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  109. [ 0.336000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  110. [ 0.340000] msgmni has been set to 117
  111. [ 0.340000] io scheduler noop registered (default)
  112. [ 0.340000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
  113. [ 0.816000] console [ttyLTQ0] enabled
  114. [ 0.824000] m25p80 spi32766.0: found s25fl064k, expected en25q64
  115. [ 0.828000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
  116. [ 0.836000] 3 ofpart partitions found on MTD device spi32766.0
  117. [ 0.840000] Creating 3 MTD partitions on "spi32766.0":
  118. [ 0.844000] 0x000000000000-0x000000020000 : "u-boot"
  119. [ 0.852000] 0x000000020000-0x0000007d0000 : "firmware"
  120. [ 0.860000] 0x000000187570-0x0000007d0000 : "rootfs"
  121. [ 0.864000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  122. [ 0.880000] mtd: device 2 (rootfs) set to be root filesystem
  123. [ 0.884000] 1 squashfs-split partitions found on MTD device rootfs
  124. [ 0.888000] 0x0000004b0000-0x0000007d0000 : "rootfs_data"
  125. [ 1.764000] 0x0000007d0000-0x000000800000 : "boardconfig"
  126. [ 1.880000] libphy: lantiq,xrx200-mdio: probed
  127. [ 1.948000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
  128. [ 2.016000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
  129. [ 2.084000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
  130. [ 2.152000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
  131. [ 2.160000] wdt 1f8803f0.watchdog: Init done
  132. [ 2.168000] TCP: cubic registered
  133. [ 2.168000] NET: Registered protocol family 17
  134. [ 2.248000] ath9k,eeprom ath9k_eep.8: using led pin 0.
  135. [ 2.252000] ath9k,eeprom ath9k_eep.8: loaded ath9k eeprom
  136. [ 2.260000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
  137. [ 2.380000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  138. [ 2.388000] Freeing unused kernel memory: 176K (80404000 - 80430000)
  139. [ 5.028000] eth0: port 5 got link
  140. [ 8.064000] eth0: port 0 got link
  141. [ 14.196000] random: nonblocking pool is initialized
  142. procd: Console is alive
  143. procd: - watchdog -
  144. [ 30.856000] IFXUSB: ifxusb_hcd: version 3.2 B110801
  145. [ 30.860000] Chip Version :000c BurstSize=4
  146. [ 31.464000] IFXUSB: USB core #0 soft-reset
  147. [ 31.768000] IFXUSB: USB core #0 soft-reset
  148. [ 31.772000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
  149. [ 31.776000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1
  150. [ 31.784000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
  151. [ 31.788000] IFXUSB: Init: Power Port (0)
  152. [ 31.796000] hub 1-0:1.0: USB hub found
  153. [ 31.796000] hub 1-0:1.0: 1 port detected
  154. [ 32.300000] IFXUSB: USB core #1 soft-reset
  155. [ 32.604000] IFXUSB: USB core #1 soft-reset
  156. [ 32.608000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
  157. [ 32.612000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2
  158. [ 32.620000] ifxusb_hcd ifxusb_hcd: irq 91, io mem 0xbe106000
  159. [ 32.624000] IFXUSB: Init: Power Port (0)
  160. [ 32.632000] hub 2-0:1.0: USB hub found
  161. [ 32.632000] hub 2-0:1.0: 1 port detected
  162. [ 32.636000] ifxusb_hcd ifxusb_hcd: requested GPIO 233
  163. procd: - preinit -
  164. Press the [f] key and hit [enter] to enter failsafe mode
  165. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  166. jffs2 is ready
  167. jffs2 is ready
  168. [ 37.460000] jffs2: notice: (326) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 0 orphan) found.
  169. switching to overlay
  170. procd: - early -
  171. procd: - watchdog -
  172. procd: - ubus -
  173. procd: - init -
  174. [ 39.924000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
  175. [ 39.956000] NET: Registered protocol family 10
  176. [ 39.964000] NET: Registered protocol family 8
  177. [ 39.968000] NET: Registered protocol family 20
  178. [ 39.976000] tun: Universal TUN/TAP device driver, 1.6
  179. [ 39.980000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  180. [ 39.996000] sit: IPv6 over IPv4 tunneling driver
  181. [ 40.008000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  182. [ 40.036000] MEI CPE Driver, Version 1.2.0
  183.  
  184. [ 40.036000] (c) Copyright 2009, Infineon Technologies AG
  185. ### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
  186.  
  187.  
  188. Lantiq CPE API Driver version: DSL CPE API V4.11.4
  189. [ 40.088000]
  190. [ 40.088000] Predefined debug level: 2
  191. [ 40.112000] u32 classifier
  192. [ 40.116000] input device check on
  193. [ 40.116000] Actions configured
  194. [ 40.124000] Mirror/redirect action on
  195. [ 40.160000] Loading modules backported from Linux version master-2014-10-08-0-g0275925
  196. [ 40.164000] Backport generated by backports.git backports-20140905-1-gde42785
  197. [ 40.184000] ip_tables: (C) 2000-2006 Netfilter Core Team
  198. [ 40.204000] Infineon Technologies DEU driver version 2.0.0
  199. [ 40.212000] IFX DEU DES initialized (multiblock).
  200. [ 40.220000] IFX DEU AES initialized (multiblock).
  201. [ 40.236000] IFX DEU ARC4 initialized (multiblock).
  202. [ 40.236000] IFX DEU SHA1 initialized.
  203. [ 40.240000] IFX DEU MD5 initialized.
  204. [ 40.252000] IFX DEU SHA1_HMAC initialized.
  205. [ 40.252000] IFX DEU MD5_HMAC initialized.
  206. [ 40.272000] nf_conntrack version 0.5.0 (946 buckets, 3784 max)
  207. [ 40.288000] usbcore: registered new interface driver usblp
  208. [ 40.316000] xt_time: kernel timezone is -0000
  209. [ 40.340000] cfg80211: Calling CRDA to update world regulatory domain
  210. [ 40.344000] cfg80211: World regulatory domain updated:
  211. [ 40.348000] cfg80211: DFS Master region: unset
  212. [ 40.352000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  213. [ 40.364000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  214. [ 40.372000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  215. [ 40.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  216. [ 40.388000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
  217. [ 40.396000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  218. [ 40.404000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  219. [ 40.412000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  220. [ 40.420000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  221. [ 40.496000] PPP generic driver version 2.4.2
  222. [ 40.500000] NET: Registered protocol family 24
  223. [ 40.548000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  224. [ 40.552000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  225. [ 40.580000] cfg80211: Calling CRDA for country: US
  226. [ 40.588000] cfg80211: Regulatory domain changed to country: US
  227. [ 40.592000] cfg80211: DFS Master region: FCC
  228. [ 40.596000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  229. [ 40.604000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  230. [ 40.612000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
  231. [ 40.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
  232. [ 40.628000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  233. [ 40.636000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  234. [ 40.644000] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xbc000000, irq=144
  235. [ 55.436000] device eth0 entered promiscuous mode
  236. [ 55.444000] br-lan: port 1(eth0) entered forwarding state
  237. [ 55.448000] br-lan: port 1(eth0) entered forwarding state
  238. [ 56.076000] ATM1.0.26 ATM (A1) firmware version 0.24
  239. [ 56.080000] ifxmips_atm: ATM init succeed
  240. [ 57.452000] br-lan: port 1(eth0) entered forwarding state
  241. procd: - init complete -
  242. [ 73.580000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  243. [ 73.588000] device wlan0 entered promiscuous mode
  244. [ 74.184000] br-lan: port 2(wlan0) entered forwarding state
  245. [ 74.188000] br-lan: port 2(wlan0) entered forwarding state
  246. [ 74.192000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  247. [ 76.192000] br-lan: port 2(wlan0) entered forwarding state
  248. [ 103.224000] enter showtime, cell rate: 0 - 1500, 1 - 1500, xdata addr: 0x82f70000
  249. [ 103.240000] enter showtime, cell rate: 0 - 1500, 1 - 1500, xdata addr: 0x82f70000
  250. Please press Enter to activate this console.
  251.  
  252. BusyBox v1.22.1 (2014-10-24 20:02:20 CEST) built-in shell (ash)
  253. Enter 'help' for a list of built-in commands.
  254.  
  255. _______ ________ __
  256. | |.-----.-----.-----.| | | |.----.| |_
  257. | - || _ | -__| || | | || _|| _|
  258. |_______|| __|_____|__|__||________||__| |____|
  259. |__| W I R E L E S S F R E E D O M
  260. -----------------------------------------------------
  261. CHAOS CALMER (Bleeding Edge, r43076)
  262. -----------------------------------------------------
  263. * 1 1/2 oz Gin Shake with a glassful
  264. * 1/4 oz Triple Sec of broken ice and pour
  265. * 3/4 oz Lime Juice unstrained into a goblet.
  266. * 1 1/2 oz Orange Juice
  267. * 1 tsp. Grenadine Syrup
  268. -----------------------------------------------------
  269. [/]# cat /proc/cpuinfo
  270. system type : VR9 rev 1.2
  271. machine : TDW8970 - TP-LINK TD-W8970
  272. processor : 0
  273. cpu model : MIPS 34Kc V5.6
  274. BogoMIPS : 332.54
  275. wait instruction : yes
  276. microsecond timers : yes
  277. tlb_entries : 16
  278. extra interrupt vector : yes
  279. hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
  280. isa : mips1 mips2 mips32r1 mips32r2
  281. ASEs implemented : mips16 dsp mt
  282. shadow register sets : 1
  283. kscratch registers : 0
  284. core : 0
  285. VCED exceptions : not available
  286. VCEI exceptions : not available
  287.  
  288. [/]# free -m
  289. total used free shared buffers
  290. Mem: 60588 26392 34196 0 2832
  291. -/+ buffers: 23560 37028
  292. Swap: 0 0 0
  293. [/]# df -h
  294. Filesystem Size Used Available Use% Mounted on
  295. rootfs 3.1M 268.0K 2.9M 8% /
  296. /dev/root 3.3M 3.3M 0 100% /rom
  297. tmpfs 29.6M 112.0K 29.5M 0% /tmp
  298. /dev/mtdblock3 3.1M 268.0K 2.9M 8% /overlay
  299. overlayfs:/overlay 3.1M 268.0K 2.9M 8% /
  300. tmpfs 512.0K 0 512.0K 0% /dev
  301. [/]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!