Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@mikrotik:~# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.4.60 (geminis3@DESKTOP-VIQJLM7) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14267+10-18fbb9aa21)) #0 SMP Tue Aug 25 23:49:30 2020
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Mikrotik hAP ac2
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 32256
- [ 0.000000] Normal zone: 284 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32256 pages, LIFO batch:7
- [ 0.000000] percpu: Embedded 15 pages/cpu s30092 r8192 d23156 u61440
- [ 0.000000] pcpu-alloc: s30092 r8192 d23156 u61440 alloc=15*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 31972
- [ 0.000000] Kernel command line:
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 118820K/129024K available (5483K kernel code, 184K rwdata, 1452K rodata, 1024K init, 234K bss, 10204K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x498 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
- [ 0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
- [ 0.000022] Switching to timer-based delay loop, resolution 20ns
- [ 0.000227] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
- [ 0.000246] pid_max: default: 32768 minimum: 301
- [ 0.000455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.000473] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.001588] CPU: Testing write buffer coherency: ok
- [ 0.002755] Setting up static identity map for 0x80300000 - 0x80300060
- [ 0.002909] rcu: Hierarchical SRCU implementation.
- [ 0.003407] smp: Bringing up secondary CPUs ...
- [ 0.006755] smp: Brought up 1 node, 4 CPUs
- [ 0.006777] SMP: Total of 4 processors activated (384.00 BogoMIPS).
- [ 0.006785] CPU: All CPU(s) started in SVC mode.
- [ 0.011217] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.011399] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.011428] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.011787] pinctrl core: initialized pinctrl subsystem
- [ 0.012994] NET: Registered protocol family 16
- [ 0.013417] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.014726] cpuidle: using governor ladder
- [ 0.014781] cpuidle: using governor menu
- [ 0.019758] GPIO line 414 (enable USB power) hogged as output/high
- [ 0.035560] cryptd: max_cpu_qlen set to 1000
- [ 0.039257] usbcore: registered new interface driver usbfs
- [ 0.039328] usbcore: registered new interface driver hub
- [ 0.039425] usbcore: registered new device driver usb
- [ 0.039477] pps_core: LinuxPPS API ver. 1 registered
- [ 0.039487] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.039512] PTP clock support registered
- [ 0.040340] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
- [ 0.041520] clocksource: Switched to clocksource arch_sys_counter
- [ 0.042414] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.042727] NET: Registered protocol family 2
- [ 0.043401] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.043448] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.043480] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.043510] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.043649] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.043690] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.043943] NET: Registered protocol family 1
- [ 0.043987] PCI: CLS 0 bytes, default 64
- [ 0.046099] workingset: timestamp_bits=14 max_order=15 bucket_order=1
- [ 0.052157] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.052174] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.106231] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
- [ 0.106255] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
- [ 0.106974] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
- [ 0.107064] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
- [ 0.107164] tcsr 1953000.ess_tcsr: setting ess interface select = 0
- [ 0.107251] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
- [ 0.107595] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.108186] msm_serial 78af000.serial: msm_serial: detected port #0
- [ 0.108233] msm_serial 78af000.serial: uartclk = 1843200
- [ 0.108288] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
- [ 0.108318] msm_serial: console setup on port #0
- [ 0.592722] printk: console [ttyMSM0] enabled
- [ 0.597661] msm_serial: driver initialized
- [ 0.607327] loop: module loaded
- [ 0.608486] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 0.616456] random: fast init done
- [ 0.619726] spi-nor spi0.0: w25q128jv (16384 Kbytes)
- [ 0.635369] 1 routerbootpart partitions found on MTD device spi0.0
- [ 0.635395] Creating 1 MTD partitions on "spi0.0":
- [ 0.640447] 0x000000000000-0x000001000000 : "partitions"
- [ 0.646422] 5 routerbootpart partitions found on MTD device partitions
- [ 0.650681] Creating 5 MTD partitions on "partitions":
- [ 0.657070] 0x000000080000-0x00000008e000 : "RouterBoot"
- [ 0.663048] 0x00000008e000-0x00000008f000 : "hard_config"
- [ 0.668464] 0x000000090000-0x000000097bbc : "dtb_config"
- [ 0.673883] 0x0000000bd000-0x0000000be000 : "soft_config"
- [ 0.679143] 0x000000100000-0x000001000000 : "firmware"
- [ 0.755818] 2 minor-fw partitions found on MTD device firmware
- [ 0.755849] Creating 2 MTD partitions on "firmware":
- [ 0.760552] 0x000000000000-0x000000350000 : "kernel"
- [ 0.766599] 0x000000350000-0x000000f00000 : "rootfs"
- [ 0.771448] mtd: device 7 (rootfs) set to be root filesystem
- [ 0.775828] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.781212] 0x0000006fd000-0x000000f00000 : "rootfs_data"
- [ 0.788956] libphy: ipq40xx_mdio: probed
- [ 0.824229] ESS reset ok!
- [ 0.857219] ESS reset ok!
- [ 1.275146] libphy: Fixed MDIO Bus: probed
- [ 1.276184] EDMA using MAC@ - using
- [ 1.276201] 86:5d:f2:1f:ca:2d
- [ 1.282512] EDMA using MAC@ - using
- [ 1.282522] 0a:f9:5a:d7:77:78
- [ 1.290789] i2c /dev entries driver
- [ 1.293296] sdhci: Secure Digital Host Controller Interface driver
- [ 1.294365] sdhci: Copyright(c) Pierre Ossman
- [ 1.300612] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.309350] MikroTik RouterBOARD hardware configuration sysfs driver v0.06
- [ 1.311929] MikroTik RouterBOARD software configuration sysfs driver v0.03
- [ 1.318624] NET: Registered protocol family 10
- [ 1.325837] Segment Routing with IPv6
- [ 1.328829] NET: Registered protocol family 17
- [ 1.332572] 8021q: 802.1Q VLAN Support v1.8
- [ 1.336843] Registering SWP/SWPB emulation handler
- [ 1.352095] hctosys: unable to open rtc device (rtc0)
- [ 1.356876] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
- [ 1.358567] Freeing unused kernel memory: 1024K
- [ 1.424826] Run /sbin/init as init process
- [ 2.140828] init: Console is alive
- [ 2.141058] init: - watchdog -
- [ 3.168517] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 3.216343] dwc3-qcom 8af8800.usb3: IRQ hs_phy_irq not found
- [ 3.216384] dwc3-qcom 8af8800.usb3: IRQ dp_hs_phy_irq not found
- [ 3.221079] dwc3-qcom 8af8800.usb3: IRQ dm_hs_phy_irq not found
- [ 3.226801] dwc3-qcom 8af8800.usb3: IRQ ss_phy_irq not found
- [ 3.234461] dwc3-qcom 60f8800.usb2: IRQ hs_phy_irq not found
- [ 3.238529] dwc3-qcom 60f8800.usb2: IRQ dp_hs_phy_irq not found
- [ 3.244215] dwc3-qcom 60f8800.usb2: IRQ dm_hs_phy_irq not found
- [ 3.249812] dwc3-qcom 60f8800.usb2: IRQ ss_phy_irq not found
- [ 3.259572] dwc3 8a00000.dwc3: Failed to get clk 'ref': -2
- [ 3.416861] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
- [ 3.555169] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.555241] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 3.559819] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
- [ 3.567242] xhci-hcd xhci-hcd.0.auto: irq 94, io mem 0x08a00000
- [ 3.577504] hub 1-0:1.0: USB hub found
- [ 3.582477] hub 1-0:1.0: 1 port detected
- [ 3.586581] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.590301] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 3.595653] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 3.604638] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.610327] hub 2-0:1.0: USB hub found
- [ 3.618067] hub 2-0:1.0: 1 port detected
- [ 3.622097] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 3.625638] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- [ 3.631172] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
- [ 3.638606] xhci-hcd xhci-hcd.1.auto: irq 95, io mem 0x06000000
- [ 3.651032] hub 3-0:1.0: USB hub found
- [ 3.653831] hub 3-0:1.0: 1 port detected
- [ 3.657910] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 3.661688] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- [ 3.666951] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 3.674635] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.681723] hub 4-0:1.0: USB hub found
- [ 3.689380] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 3.695077] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 3.702118] init: - preinit -
- [ 4.313500] random: crng init done
- [ 5.352255] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 10.498156] jffs2: notice: (200) jffs2_build_xattr_subsystem: complete building xattr subsystem, 14 of xdatum (10 unchecked, 3 orphan) and 15 of xref (3 dead, 0 orphan) found.
- [ 10.504438] mount_root: switching to jffs2 overlay
- [ 10.553234] overlayfs: upper fs does not support tmpfile.
- [ 10.574242] urandom-seed: Seeding with /etc/urandom.seed
- [ 10.664629] procd: - early -
- [ 10.664774] procd: - watchdog -
- [ 11.255448] procd: - watchdog -
- [ 11.256252] procd: - ubus -
- [ 11.331250] procd: - init -
- [ 11.798324] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 11.844105] urngd: v1.0.2 started.
- [ 11.852084] Mirror/redirect action on
- [ 11.859137] u32 classifier
- [ 11.859168] input device check on
- [ 11.860739] Actions configured
- [ 11.871742] Loading modules backported from Linux version v5.8-0-gbcf876870b95
- [ 11.871782] Backport generated by backports.git v5.8-1-0-g79400d9e
- [ 11.906353] xt_time: kernel timezone is -0000
- [ 11.950077] PPP generic driver version 2.4.2
- [ 11.951298] NET: Registered protocol family 24
- [ 11.999605] ath10k_mac_create, priv_size: 924 hw: 6c5ffe93 hw->priv: 46940e5b
- [ 13.345984] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
- [ 13.346033] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 13.357630] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-8c5b2baa2 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 1f3ed50f
- [ 13.410282] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 24cecd7f
- [ 14.717193] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
- [ 14.718659] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 14.722716] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 14.759702] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 14.760657] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 14.890499] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 15.008238] ath: EEPROM regdomain sanitized
- [ 15.008338] ath: EEPROM regdomain: 0x64
- [ 15.008391] ath: EEPROM indicates we should expect a direct regpair map
- [ 15.008532] ath: Country alpha2 being used: 00
- [ 15.008590] ath: Regpair used: 0x64
- [ 15.045819] ath10k_mac_create, priv_size: 924 hw: a356eff2 hw->priv: addb5f36
- [ 16.328907] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
- [ 16.328980] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 16.341998] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-8c5b2baa2 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 1f3ed50f
- [ 16.392762] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 24cecd7f
- [ 17.700116] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
- [ 17.701489] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 17.705558] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 17.742393] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 17.743349] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 17.866455] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 17.978683] ath: EEPROM regdomain sanitized
- [ 17.978786] ath: EEPROM regdomain: 0x64
- [ 17.978843] ath: EEPROM indicates we should expect a direct regpair map
- [ 17.978989] ath: Country alpha2 being used: 00
- [ 17.979045] ath: Regpair used: 0x64
- [ 17.998182] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 23.105481] br-lan: port 1(eth0) entered blocking state
- [ 23.105535] br-lan: port 1(eth0) entered disabled state
- [ 23.109949] device eth0 entered promiscuous mode
- [ 23.131785] ess_edma c080000.edma: eth1: GMAC Link is down
- [ 23.955837] ath: EEPROM regdomain: 0x8348
- [ 23.955881] ath: EEPROM indicates we should expect a country code
- [ 23.958863] ath: doing EEPROM country->regdmn map search
- [ 23.965038] ath: country maps to regdmn code: 0x3a
- [ 23.970317] ath: Country alpha2 being used: US
- [ 23.975080] ath: Regpair used: 0x3a
- [ 23.979342] ath: regdomain 0x8348 dynamically updated by user
- [ 23.982873] ath: EEPROM regdomain: 0x8348
- [ 23.988628] ath: EEPROM indicates we should expect a country code
- [ 23.992726] ath: doing EEPROM country->regdmn map search
- [ 23.998718] ath: country maps to regdmn code: 0x3a
- [ 24.004179] ath: Country alpha2 being used: US
- [ 24.008686] ath: Regpair used: 0x3a
- [ 24.013204] ath: regdomain 0x8348 dynamically updated by user
- [ 24.152044] br-lan: port 1(eth0) entered blocking state
- [ 24.152102] br-lan: port 1(eth0) entered forwarding state
- [ 24.156601] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 25.192372] ess_edma c080000.edma: eth1: GMAC Link is up with phy_speed=100
- [ 25.192496] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 26.855530] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
- [ 26.855688] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 26.860966] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 26.898461] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 26.899470] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 27.199569] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 27.228666] br-lan: port 2(wlan0) entered blocking state
- [ 27.228704] br-lan: port 2(wlan0) entered disabled state
- [ 27.233580] device wlan0 entered promiscuous mode
- [ 27.451250] ath10k_ahb a000000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
- [ 27.675891] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 27.678200] br-lan: port 2(wlan0) entered blocking state
- [ 27.682066] br-lan: port 2(wlan0) entered forwarding state
- [ 30.661977] pppoe-wan: renamed from ppp0
- [ 386.621067] device wlan0 left promiscuous mode
- [ 386.621525] br-lan: port 2(wlan0) entered disabled state
- [ 386.669373] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 386.684769] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- [ 386.684919] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- [ 575.076652] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
- [ 575.076803] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 575.082157] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 575.119553] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 575.120669] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 575.415257] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 575.430259] br-lan: port 2(wlan0) entered blocking state
- [ 575.430338] br-lan: port 2(wlan0) entered disabled state
- [ 575.435727] device wlan0 entered promiscuous mode
- [ 575.747666] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 575.752445] br-lan: port 2(wlan0) entered blocking state
- [ 575.753372] br-lan: port 2(wlan0) entered forwarding state
- [ 609.412716] device wlan0 left promiscuous mode
- [ 609.412966] br-lan: port 2(wlan0) entered disabled state
- [ 609.683048] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 609.693918] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- [ 609.694037] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- [ 1056.432639] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
- [ 1056.432792] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1056.438147] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 1056.474946] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1056.476338] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1056.761264] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1056.782269] br-lan: port 2(wlan1) entered blocking state
- [ 1056.782308] br-lan: port 2(wlan1) entered disabled state
- [ 1056.787256] device wlan1 entered promiscuous mode
- [ 1057.303607] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 1057.306146] br-lan: port 2(wlan1) entered blocking state
- [ 1057.309189] br-lan: port 2(wlan1) entered forwarding state
- [ 1068.015015] device wlan1 left promiscuous mode
- [ 1068.015238] br-lan: port 2(wlan1) entered disabled state
- [ 1068.086291] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 1068.089116] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
- [ 1074.623270] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
- [ 1074.623442] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1074.628803] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 1074.665576] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1074.667202] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1074.953349] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1074.970349] br-lan: port 2(wlan1) entered blocking state
- [ 1074.970392] br-lan: port 2(wlan1) entered disabled state
- [ 1074.975330] device wlan1 entered promiscuous mode
- [ 1075.497267] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 1075.499903] br-lan: port 2(wlan1) entered blocking state
- [ 1075.502963] br-lan: port 2(wlan1) entered forwarding state
- [ 1079.645115] device wlan1 left promiscuous mode
- [ 1079.645607] br-lan: port 2(wlan1) entered disabled state
- [ 1079.821305] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 1079.835639] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
- [ 1150.211519] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
- [ 1150.211686] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1150.217020] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 1150.254456] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1150.255459] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1150.556513] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1150.577573] br-lan: port 2(wlan0) entered blocking state
- [ 1150.577611] br-lan: port 2(wlan0) entered disabled state
- [ 1150.582361] device wlan0 entered promiscuous mode
- [ 1150.894961] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 1150.897413] br-lan: port 2(wlan0) entered blocking state
- [ 1150.900655] br-lan: port 2(wlan0) entered forwarding state
- [ 1161.334239] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
- [ 1161.334396] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1161.339675] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 1161.376507] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1161.377888] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1161.665838] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1161.676998] br-lan: port 3(wlan1) entered blocking state
- [ 1161.677076] br-lan: port 3(wlan1) entered disabled state
- [ 1161.682483] device wlan1 entered promiscuous mode
- [ 1162.201876] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 1162.204932] br-lan: port 3(wlan1) entered blocking state
- [ 1162.207570] br-lan: port 3(wlan1) entered forwarding state
- [ 1172.926252] device wlan1 left promiscuous mode
- [ 1172.926497] br-lan: port 3(wlan1) entered disabled state
- [ 1172.988997] device wlan0 left promiscuous mode
- [ 1172.990394] br-lan: port 2(wlan0) entered disabled state
- [ 1173.025235] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 1173.026602] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- [ 1173.031408] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- [ 1173.187801] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 1173.190422] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
- [ 1179.703506] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
- [ 1179.703674] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1179.709018] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 1179.746079] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1179.749123] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1180.034735] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1180.057604] br-lan: port 2(wlan1) entered blocking state
- [ 1180.057658] br-lan: port 2(wlan1) entered disabled state
- [ 1180.062499] device wlan1 entered promiscuous mode
- [ 1180.574780] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 1180.577424] br-lan: port 2(wlan1) entered blocking state
- [ 1180.580472] br-lan: port 2(wlan1) entered forwarding state
- [ 1195.720274] device wlan1 left promiscuous mode
- [ 1195.720525] br-lan: port 2(wlan1) entered disabled state
- [ 1195.840078] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
- [ 1195.846174] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
- [ 1241.441331] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
- [ 1241.441483] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1241.446827] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 1241.484167] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1241.485213] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1241.781679] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1250.824036] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
- [ 1250.824251] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 1250.829480] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 1250.866647] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 1250.867687] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
- [ 1251.158680] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 1271.929284] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
- root@mikrotik:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement