Advertisement
nyakoi

Untitled

Aug 24th, 2018
215
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.07 KB | None | 0 0
  1. U-Boot SPL 2017.07-00494-g19d1f1a-dirty (Aug 30 2017 - 15:37:08)
  2. DRAM: 512 MiB
  3. Failed to set core voltage! Can't set CPU frequency
  4. Trying to boot from MMC1
  5.  
  6.  
  7. U-Boot 2017.07-00494-g19d1f1a-dirty (Aug 30 2017 - 15:37:08 +0200) Allwinner Tec hnology
  8.  
  9. CPU: Allwinner H3 (SUN8I 1680)
  10. Model: Xunlong Orange Pi Plus 2E
  11. DRAM: 512 MiB
  12. MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
  13. *** Warning - bad CRC, using default environment
  14.  
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Net: No ethernet found.
  19. starting USB...
  20. USB0: USB EHCI 1.00
  21. USB1: USB OHCI 1.0
  22. USB2: USB EHCI 1.00
  23. USB3: USB OHCI 1.0
  24. USB4: USB EHCI 1.00
  25. USB5: USB OHCI 1.0
  26. scanning bus 0 for devices... 1 USB Device(s) found
  27. scanning bus 2 for devices... 1 USB Device(s) found
  28. scanning bus 4 for devices... 1 USB Device(s) found
  29. scanning usb for storage devices... 0 Storage Device(s) found
  30. Press SPACE to boot H3resc, 'd' for H3droid or 'a' for armbian
  31. Hit any other key to stop autoboot: 0
  32. key pressed: 0
  33. switch to partitions #0, OK
  34. mmc0 is current device
  35. Scanning mmc 0:1...
  36. Found U-Boot script /boot.scr
  37. 1725 bytes read in 9 ms (186.5 KiB/s)
  38. ## Executing script at 43100000
  39. ** File not found /fex/script.bin **
  40. no /fex/script.bin, fallback: /fex/H3/orangepiplus2e.bin
  41.  
  42. booting H3ii
  43. 36656 bytes read in 29 ms (1.2 MiB/s)
  44. 15908667 bytes read in 1217 ms (12.5 MiB/s)
  45. 5296360 bytes read in 412 ms (12.3 MiB/s)
  46. ## Loading init Ramdisk from Legacy Image at 47200000 ...
  47. Image Name: H3droid resc ramdisk
  48. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  49. Data Size: 15908603 Bytes = 15.2 MiB
  50. Load Address: 00000000
  51. Entry Point: 00000000
  52. Verifying Checksum ... OK
  53. Loading Ramdisk to 490d4000, end 49fffefb ... OK
  54. Using machid 0x1029 from environment
  55.  
  56. Starting kernel ...
  57.  
  58. [sun8i_fixup]: From boot, get meminfo:
  59. Start: 0x40000000
  60. Size: 512MB
  61. ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
  62. ion_reserve_select: ion chipid [0x2c00042!
  63. ion_reserve_common: ion reserve: [0x57e00000, 0x60000000]!
  64. [ 0.000000] cma: dma_declare_contiguous:415: base:0x58000000, size:132MB (mem_start:0x40000000, mem_size:512MB)
  65. [ 0.000000] cma: dma_declare_contiguous:421: ION reserve params are bad, adjusting: base: 0x5a000000, size: 32MB
  66. [ 0.032465] BUG: Bad page state in process swapper/0 pfn:5c000
  67. [ 0.032525] page:c0e55000 count:0 mapcount:-127 mapping: (null) index:0x0
  68. [ 0.032560] page flags: 0x0()
  69. [ 0.033323] BUG: Bad page state in process swapper/0 pfn:5c400
  70. [ 0.033365] page:c0e5d000 count:0 mapcount:-127 mapping: (null) index:0x0
  71. [ 0.033399] page flags: 0x0()
  72. [ 0.034089] BUG: Bad page state in process swapper/0 pfn:5c800
  73. [ 0.034128] page:c0e65000 count:0 mapcount:-127 mapping: (null) index:0x0
  74. [ 0.034163] page flags: 0x0()
  75. [ 0.034226] BUG: Bad page state in process swapper/0 pfn:5cc00
  76. [ 0.034226] page:c0e6d000 count:0 mapcount:-127 mapping: (null) index:0x0
  77. [ 0.034226] page flags: 0x0()
  78. [ 0.034226] BUG: Bad page state in process swapper/0 pfn:5d000
  79. [ 0.034226] page:c0e75000 count:0 mapcount:-127 mapping: (null) index:0x0
  80. [ 0.034226] page flags: 0x0()
  81. [ 0.034226] BUG: Bad page state in process swapper/0 pfn:5d400
  82. [ 0.034226] page:c0e7d000 count:0 mapcount:-127 mapping: (null) index:0x0
  83. [ 0.034226] page flags: 0x0()
  84. [ 0.034226] BUG: Bad page state in process swapper/0 pfn:5d800
  85. [ 0.034226] page:c0e85000 count:0 mapcount:-127 mapping: (null) index:0x0
  86. [ 0.034226] page flags: 0x0()
  87. [ 0.034226] BUG: Bad page state in process swapper/0 pfn:5dc00
  88. [ 0.034226] page:c0e8d000 count:0 mapcount:-127 mapping: (null) index:0x0
  89. [ 0.034226] page flags: 0x0()
  90. [ 0.034441] BUG: Bad page state in process swapper/0 pfn:5e000
  91. [ 0.034481] page:c0e95000 count:0 mapcount:-127 mapping: (null) index:0x0
  92. [ 0.034526] page flags: 0x0()
  93. [ 0.035219] BUG: Bad page state in process swapper/0 pfn:5e400
  94. [ 0.035267] page:c0e9d000 count:0 mapcount:-127 mapping: (null) index:0x0
  95. [ 0.035307] page flags: 0x0()
  96. [ 0.035998] BUG: Bad page state in process swapper/0 pfn:5e800
  97. [ 0.036047] page:c0ea5000 count:0 mapcount:-127 mapping: (null) index:0x0
  98. [ 0.036086] page flags: 0x0()
  99. [ 0.036776] BUG: Bad page state in process swapper/0 pfn:5ec00
  100. [ 0.036825] page:c0ead000 count:0 mapcount:-127 mapping: (null) index:0x0
  101. [ 0.036864] page flags: 0x0()
  102. [ 1.438980] ls_fetch_sysconfig_para: type err device_used = 0.
  103. [ 1.447257] tscdev_init: tsc driver is disabled
  104. [ 1.473857] [ARISC ERROR] :message process error
  105. [ 1.479055] [ARISC ERROR] :message addr : f004b840
  106. [ 1.484646] [ARISC ERROR] :message state : 5
  107. [ 1.489535] [ARISC ERROR] :message attr : 2
  108. [ 1.494443] [ARISC ERROR] :message type : 30
  109. [ 1.499426] [ARISC ERROR] :message result : ff
  110. [ 1.504455] [cpu_freq] ERR:set cpu frequency to 480MHz failed!
  111. [ 1.517105] [ARISC ERROR] :message process error
  112. [ 1.522345] [ARISC ERROR] :message addr : f004b840
  113. [ 1.527920] [ARISC ERROR] :message state : 5
  114. [ 1.532829] [ARISC ERROR] :message attr : 2
  115. [ 1.537717] [ARISC ERROR] :message type : 30
  116. [ 1.542717] [ARISC ERROR] :message result : ff
  117. [ 1.547725] [cpu_freq] ERR:set cpu frequency to 480MHz failed!
  118. [ 1.560336] [ARISC ERROR] :message process error
  119. [ 1.565522] [ARISC ERROR] :message addr : f004b840
  120. [ 1.571112] [ARISC ERROR] :message state : 5
  121. [ 1.575995] [ARISC ERROR] :message attr : 2
  122. [ 1.580898] [ARISC ERROR] :message type : 30
  123. [ 1.585878] [ARISC ERROR] :message result : ff
  124. [ 1.590897] [cpu_freq] ERR:set cpu frequency to 1008MHz failed!
  125. [ 1.603427] [ARISC ERROR] :message process error
  126. [ 1.608609] [ARISC ERROR] :message addr : f004b840
  127. [ 1.614208] [ARISC ERROR] :message state : 5
  128. [ 1.619099] [ARISC ERROR] :message attr : 2
  129. [ 1.624005] [ARISC ERROR] :message type : 30
  130. [ 1.628991] [ARISC ERROR] :message result : ff
  131. [ 1.634015] [cpu_freq] ERR:set cpu frequency to 1008MHz failed!
  132. [ 1.646711] [ARISC ERROR] :message process error
  133. [ 1.651915] [ARISC ERROR] :message addr : f004b840
  134. [ 1.657485] [ARISC ERROR] :message state : 5
  135. [ 1.662388] [ARISC ERROR] :message attr : 2
  136. [ 1.667271] [ARISC ERROR] :message type : 30
  137. [ 1.672275] [ARISC ERROR] :message result : ff
  138. [ 1.677277] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  139. [ 1.689994] [ARISC ERROR] :message process error
  140. [ 1.695197] [ARISC ERROR] :message addr : f004b840
  141. [ 1.700779] [ARISC ERROR] :message state : 5
  142. [ 1.705666] [ARISC ERROR] :message attr : 2
  143. [ 1.710587] [ARISC ERROR] :message type : 30
  144. [ 1.715573] [ARISC ERROR] :message result : ff
  145. [ 1.720594] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  146. [ 1.733279] [ARISC ERROR] :message process error
  147. [ 1.738457] [ARISC ERROR] :message addr : f004b840
  148. [ 1.744042] [ARISC ERROR] :message state : 5
  149. [ 1.748931] [ARISC ERROR] :message attr : 2
  150. [ 1.753835] [ARISC ERROR] :message type : 30
  151. [ 1.758819] [ARISC ERROR] :message result : ff
  152. [ 1.763845] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  153. [ 1.776551] [ARISC ERROR] :message process error
  154. [ 1.781751] [ARISC ERROR] :message addr : f004b840
  155. [ 1.787319] [ARISC ERROR] :message state : 5
  156. [ 1.792223] [ARISC ERROR] :message attr : 2
  157. [ 1.797107] [ARISC ERROR] :message type : 30
  158. [ 1.802106] [ARISC ERROR] :message result : ff
  159. [ 1.807108] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  160. [ 1.819813] [ARISC ERROR] :message process error
  161. [ 1.825016] [ARISC ERROR] :message addr : f004b840
  162. [ 1.830602] [ARISC ERROR] :message state : 5
  163. [ 1.835490] [ARISC ERROR] :message attr : 2
  164. [ 1.840390] [ARISC ERROR] :message type : 30
  165. [ 1.845377] [ARISC ERROR] :message result : ff
  166. [ 1.850397] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  167. [ 1.863088] [ARISC ERROR] :message process error
  168. [ 1.868272] [ARISC ERROR] :message addr : f004b840
  169. [ 1.873855] [ARISC ERROR] :message state : 5
  170. [ 1.878739] [ARISC ERROR] :message attr : 2
  171. [ 1.883639] [ARISC ERROR] :message type : 30
  172. [ 1.888622] [ARISC ERROR] :message result : ff
  173. [ 1.893638] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  174. [ 1.906193] [ARISC ERROR] :message process error
  175. [ 1.911397] [ARISC ERROR] :message addr : f004b840
  176. [ 1.916968] [ARISC ERROR] :message state : 5
  177. [ 1.921870] [ARISC ERROR] :message attr : 2
  178. [ 1.926758] [ARISC ERROR] :message type : 30
  179. [ 1.931760] [ARISC ERROR] :message result : ff
  180. [ 1.936760] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
  181. [ 2.025473] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  182. [ 2.032610] ths_fetch_sysconfig_para: type err device_used = 1.
  183. [ 3.511233] EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  184.  
  185. [rcS-h3ii starting, on success we will reboot into h3resc, then must set proper uboot/fex to complete installation!]
  186.  
  187. [ 28.000011] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:0]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement