Bullet64

Boot von usb3

Mar 23rd, 2019
128
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. Willkommen zu minicom 2.7
  3.  
  4. Optionen: I18n
  5. Übersetzt am Apr 22 2017, 09:14:19.
  6. Port /dev/ttyUSB0, 17:50:10
  7.  
  8. Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
  9. Stopping Save/Restore Sound Card State...
  10. [ OK ] Stopped target Sound Card.
  11. Stopping User Manager for UID 1000...
  12. [ OK ] Stopped target Graphical Interface.
  13. Stopping Disk Manager...
  14. [ OK ] Stopped target Multi-User System.
  15. Stopping LSB: disk temperature monitoring daemon...
  16. [ OK ] Stopped Wait until snapd is fully seeded.
  17. Stopping Dispatcher daemon for systemd-networkd...
  18. Stopping LSB: set CPUFreq kernel parameters...
  19. Stopping LSB: Speech Dispatcher...
  20. Stopping Tool to automatically coll��… submit kernel crash signatures..
  21. Stopping Authorization Manager...
  22. Stopping Session 2 of user rock64.
  23. [ OK ] Stopped target Timers.
  24. [ OK ] Stopped Discard unused blocks once a week.
  25. Stopping Unattended Upgrades Shutdown...
  26. Stopping System Logging Service...
  27. Stopping Accounts Service...
  28. [ OK ] Stopped Initialize hardware monitoring sensors.
  29. [ OK ] Stopped Resets System Activity Data Collector.
  30. [ OK ] Stopped Trigger anacron every hour.
  31. [ OK ] Stopped OpenVPN service.
  32. Stopping crash report submission daemon...
  33. [ OK ] Stopped Daily Cleanup of Temporary Directories.
  34. [ OK ] Stopped Daily apt upgrade and clean activities.
  35. [ OK ] Stopped Daily apt download activities.
  36. Stopping OpenBSD Secure Shell server...
  37. [ OK ] Stopped target Login Prompts.
  38. Stopping Getty on tty1...
  39. Stopping Regular background program processing daemon...
  40. [ OK ] Stopped Message of the Day.
  41. Stopping LSB: automatic crash report generation...
  42. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
  43. Stopping Make remote CUPS printers available locally...
  44. Stopping Modem Manager...
  45. Stopping Bluetooth service...
  46. Stopping Serial Getty on ttyS2...
  47. [ OK ] Stopped Regular background program processing daemon.
  48. [ OK ] Stopped Disk Manager.
  49. [ OK ] Stopped System Logging Service.
  50. [ OK ] Stopped Dispatcher daemon for systemd-networkd.
  51. [ OK ] Stopped Accounts Service.
  52. [ OK ] Stopped Modem Manager.
  53. [ OK ] Stopped Authorization Manager.
  54. [ OK ] Stopped Make remote CUPS printers available locally.
  55. [ OK ] Stopped Bluetooth service.
  56. [ OK ] Stopped OpenBSD Secure Shell server.
  57. [ OK ] Stopped Unattended Upgrades Shutdown.
  58. [ OK ] Stopped Serial Getty on ttyS2.
  59. [ OK ] Stopped Getty on tty1.
  60. [ OK ] Stopped crash report submission daemon.
  61. [ OK ] Stopped User Manager for UID 1000.
  62. [ OK ] Stopped Save/Restore Sound Card State.
  63. [ OK ] Stopped Session 2 of user rock64.
  64. [ OK ] Stopped Tool to automatically colle��…nd submit kernel crash signature.
  65. [ OK ] Stopped target System Time Synchronized.
  66. [ OK ] Stopped target Host and Network Name Lookups.
  67. [ OK ] Removed slice User Slice of rock64.
  68. [ OK ] Removed slice system-getty.slice.
  69. Stopping Permit User Sessions...
  70. [ OK ] Removed slice system-serial\x2dgetty.slice.
  71. Stopping Login Service...
  72. [ OK ] Stopped Generate SSH keys if not there.
  73. Stopping Avahi mDNS/DNS-SD Stack...
  74. Stopping CUPS Scheduler...
  75. [ OK ] Stopped CUPS Scheduler.
  76. [ OK ] Stopped Avahi mDNS/DNS-SD Stack.
  77. [ OK ] Stopped LSB: disk temperature monitoring daemon.
  78. [ OK ] Stopped LSB: set CPUFreq kernel parameters.
  79. [ OK ] Stopped LSB: Speech Dispatcher.
  80. [ OK ] Stopped LSB: automatic crash report generation.
  81. [ OK ] Stopped Permit User Sessions.
  82. Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
  83. [ OK ] Stopped target Network is Online.
  84. [ OK ] Stopped Network Manager Wait Online.
  85. [ OK ] Stopped Wait for Network to be Configured.
  86. [ OK ] Stopped target Network.
  87. Stopping WPA supplicant...
  88. Stopping Network Manager...
  89. Stopping Raise network interfaces...
  90. Stopping Network Name Resolution...
  91. [ OK ] Stopped Login Service.
  92. [ OK ] Stopped WPA supplicant.
  93. [ OK ] Stopped Network Name Resolution.
  94. [ OK ] Stopped Network Manager.
  95. [ OK ] Stopped Raise network interfaces.
  96. [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
  97. [ OK ] Stopped target Remote File Systems.
  98. Stopping Network Service...
  99. Stopping D-Bus System Message Bus...
  100. [ OK ] Stopped target User and Group Name Lookups.
  101. [ OK ] Stopped D-Bus System Message Bus.
  102. [ OK ] Stopped Network Service.
  103. [ OK ] Stopped target Network (Pre).
  104. [ OK ] Stopped target Basic System.
  105. [ OK ] Stopped target Slices.
  106. [ OK ] Removed slice User and Session Slice.
  107. [ OK ] Stopped target Paths.
  108. [ OK ] Stopped resolvconf-pull-resolved.path.
  109. [ OK ] Stopped CUPS Scheduler.
  110. [ OK ] Stopped target Sockets.
  111. [ OK ] Closed Syslog Socket.
  112. [ OK ] Closed CUPS Scheduler.
  113. [ OK ] Closed Socket activation for snappy daemon.
  114. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
  115. [ OK ] Closed D-Bus System Message Bus Socket.
  116. [ OK ] Stopped target System Initialization.
  117. Stopping Update UTMP about System Boot/Shutdown...
  118. [ OK ] Stopped target Local Encrypted Volumes.
  119. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
  120. [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
  121. Stopping Load/Save Random Seed...
  122. [ OK ] Stopped Apply Kernel Variables.
  123. Stopping Restore / save the current clock...
  124. [ OK ] Stopped Load Kernel Modules.
  125. Stopping Network Time Synchronization...
  126. [ OK ] Stopped Load/Save Random Seed.
  127. [ OK ] Stopped Restore / save the current clock.
  128. [ OK ] Stopped Network Time Synchronization.
  129. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  130. [ OK ] Stopped Create Volatile Files and Directories.
  131. [ OK ] Stopped target Local File Systems.
  132. Unmounting /run/user/1000...
  133. Unmounting /boot/efi...
  134. [ OK ] Unmounted /run/user/1000.
  135. [ OK ] Unmounted /boot/efi.
  136. [ OK ] Reached target Unmount All Filesystems.
  137. [ OK ] Stopped target Swap.
  138. [ OK ] Stopped target Local File Systems (Pre).
  139. [ OK ] Stopped Remount Root and Kernel File Systems.
  140. [ OK ] Stopped Create Static Device Nodes in /dev.
  141. [ OK ] Reached target Shutdown.
  142. [ OK ] Reached target Final Step.
  143. Starting Reboot...
  144. [ 50.756032] dw_wdt: unexpected close, system will reboot soon
  145. [ 51.074979] reboot: Restarting system
  146. DDR Version 1.19 20190305
  147. In
  148. soft reset
  149. SRX
  150. channel 0
  151. CS = 0
  152. MR0=0x98
  153. MR4=0x1
  154. MR5=0xFF
  155. MR8=0x8
  156. MR12=0x72
  157. MR14=0x72
  158. MR18=0x0
  159. MR19=0x0
  160. MR24=0x8
  161. MR25=0x0
  162. channel 1
  163. CS = 0
  164. MR0=0x98
  165. MR4=0x3
  166. MR5=0xFF
  167. MR8=0x8
  168. MR12=0x72
  169. MR14=0x72
  170. MR18=0x0
  171. MR19=0x0
  172. MR24=0x8
  173. MR25=0x0
  174. channel 0 training pass!
  175. channel 1 training pass!
  176. change freq to 400MHz 0,1
  177. channel 0
  178. CS = 0
  179. MR0=0x98
  180. MR4=0x1
  181. MR5=0xFF
  182. MR8=0x8
  183. MR12=0x72
  184. MR14=0x72
  185. MR18=0x0
  186. MR19=0x0
  187. MR24=0x8
  188. MR25=0x0
  189. channel 1
  190. CS = 0
  191. MR0=0x98
  192. MR4=0x3
  193. MR5=0xFF
  194. MR8=0x8
  195. MR12=0x72
  196. MR14=0x72
  197. MR18=0x0
  198. MR19=0x0
  199. MR24=0x8
  200. MR25=0x0
  201. channel 0 training pass!
  202. channel 1 training pass!
  203. change freq to 800MHz 1,0
  204. Channel 0: LPDDR4,800MHz
  205. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  206. Channel 1: LPDDR4,800MHz
  207. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  208. 256B stride
  209. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  210. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  211. pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
  212. OUT
  213. U-Boot SPL board init
  214.  
  215. U-Boot SPL 2017.09-rockchip-ayufan-1045-g9922d32c04 (Mar 21 2019 - 17:27:29)
  216. booted from SPI flash
  217. Trying to boot from SPI
  218. NOTICE: BL31: v1.3(debug):370ab80
  219. NOTICE: BL31: Built : 09:23:41, Mar 4 2019
  220. NOTICE: BL31: Rockchip release version: v1.1
  221. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  222. INFO: Using opteed sec cpu_context!
  223. INFO: boot cpu mask: 0
  224. INFO: plat_rockchip_pmu_init(1181): pd status 3e
  225. INFO: BL31: Initializing runtime services
  226. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
  227. ERROR: Error initializing runtime service opteed_fast
  228. INFO: BL31: Preparing for EL3 exit to normal world
  229. INFO: Entry point address = 0x200000
  230. INFO: SPSR = 0x3c9
  231.  
  232.  
  233. U-Boot 2017.09-rockchip-ayufan-1045-g9922d32c04 (Mar 21 2019 - 17:27:35 +0000)
  234.  
  235. Model: Pine64 RockPro64
  236. DRAM: 2 GiB
  237. DCDC_REG1@vdd_center: ; enabling
  238. DCDC_REG2@vdd_cpu_l: ; enabling
  239. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  240. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  241. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  242. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  243. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  244. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  245. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  246. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  247. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  248. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  249. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  250. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  251. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  252. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  253. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  254. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  255. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  256. vdd-log@vdd_log: ; enabling (ret: -38)
  257. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  258. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  259. *** Warning - bad CRC, using default environment
  260.  
  261. In: serial@ff1a0000
  262. Out: serial@ff1a0000
  263. Err: serial@ff1a0000
  264. Model: Pine64 RockPro64
  265. normal boot
  266. Net: eth0: ethernet@fe300000
  267. Hit any key to stop autoboot: 0
  268. switch to partitions #0, OK
  269. mmc0(part 0) is current device
  270. Scanning mmc 0:7...
  271. Found /boot/extlinux/extlinux.conf
  272. Retrieving file: /boot/extlinux/extlinux.conf
  273. 1055 bytes read in 90 ms (10.7 KiB/s)
  274. select kernel
  275. 1: kernel-4.4.167-1161-rockchip-ayufan-g6f1664023387
  276. 2: kernel-4.4.167-1161-rockchip-ayufan-g6f1664023387-memtest
  277. Enter choice: 1: kernel-4.4.167-1161-rockchip-ayufan-g6f1664023387
  278. Retrieving file: /boot/initrd.img-4.4.167-1161-rockchip-ayufan-g6f1664023387
  279. 6091224 bytes read in 362 ms (16 MiB/s)
  280. Retrieving file: /boot/vmlinuz-4.4.167-1161-rockchip-ayufan-g6f1664023387
  281. 20269064 bytes read in 960 ms (20.1 MiB/s)
  282. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  283. Retrieving file: /boot/dtbs/4.4.167-1161-rockchip-ayufan-g6f1664023387/rockchipb
  284. 93108 bytes read in 597 ms (151.4 KiB/s)
  285. ## Flattened Device Tree blob at 01f00000
  286. Booting using the fdt blob at 0x1f00000
  287. Loading Ramdisk to 7d933000, end 7df021d8 ... OK
  288. Loading Device Tree to 000000007d919000, end 000000007d932bb3 ... OK
  289.  
  290. Starting kernel ...
  291.  
  292. [ 0.000000] Booting Linux on physical CPU 0x0
  293. [ 0.000000] Initializing cgroup subsys cpuset
  294. [ 0.000000] Initializing cgroup subsys cpu
  295. [ 0.000000] Initializing cgroup subsys cpuacct
  296. [ 0.000000] Linux version 4.4.167-1161-rockchip-ayufan-g6f1664023387 (root@r9
  297. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  298. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  299. [ 0.000000] bootconsole [uart0] enabled
  300. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  301. [ 0.000000] psci: probing for conduit method from DT.
  302. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  303. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  304. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  305. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feec000 s46248 r8192 d316
  306. [ 0.000000] Detected VIPT I-cache on CPU0
  307. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  308. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  309. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  310. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  311. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  312. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  313. [ 0.000000] software IO TLB [mem 0x7fea4000-0x7fee4000] (0MB) mapped at [fff]
  314. [ 0.000000] Memory: 2031192K/2095104K available (12350K kernel code, 1746K r)
  315. [ 0.000000] Virtual kernel memory layout:
  316. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  317. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  318. [ 0.000000] .init : 0xffffff8009100000 - 0xffffff8009220000 ( 1152 )
  319. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c90000 ( 12352 )
  320. [ 0.000000] .rodata : 0xffffff8008c90000 - 0xffffff8009100000 ( 4544 )
  321. [ 0.000000] .data : 0xffffff8009220000 - 0xffffff80093d4808 ( 1747 )
  322. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  323. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  324. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  325. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  326. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  327. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  328. [ 0.000000] Hierarchical RCU implementation.
  329. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  330. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  331. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  332. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  333. [ 0.000000] GIC: Using split EOI/Deactivate mode
  334. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  335. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  336. [ 0.000000] ITS: using cache flushing for cmd queue
  337. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  338. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  339. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  340. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  341. [ 0.000000] GIC: using cache flushing for LPI property table
  342. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  343. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  344. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  345. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  346. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  347. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  348. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  349. [ 0.002186] Console: colour dummy device 80x25
  350. [ 0.002616] console [tty0] enabled
  351. [ 0.002951] bootconsole [uart0] disabled
  352. [ 0.000000] Booting Linux on physical CPU 0x0
  353. [ 0.000000] Initializing cgroup subsys cpuset
  354. [ 0.000000] Initializing cgroup subsys cpu
  355. [ 0.000000] Initializing cgroup subsys cpuacct
  356. [ 0.000000] Linux version 4.4.167-1161-rockchip-ayufan-g6f1664023387 (root@r9
  357. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  358. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  359. [ 0.000000] bootconsole [uart0] enabled
  360. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  361. [ 0.000000] psci: probing for conduit method from DT.
  362. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  363. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  364. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  365. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feec000 s46248 r8192 d316
  366. [ 0.000000] Detected VIPT I-cache on CPU0
  367. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  368. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  369. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  370. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  371. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  372. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  373. [ 0.000000] software IO TLB [mem 0x7fea4000-0x7fee4000] (0MB) mapped at [fff]
  374. [ 0.000000] Memory: 2031192K/2095104K available (12350K kernel code, 1746K r)
  375. [ 0.000000] Virtual kernel memory layout:
  376. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  377. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  378. [ 0.000000] .init : 0xffffff8009100000 - 0xffffff8009220000 ( 1152 )
  379. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c90000 ( 12352 )
  380. [ 0.000000] .rodata : 0xffffff8008c90000 - 0xffffff8009100000 ( 4544 )
  381. [ 0.000000] .data : 0xffffff8009220000 - 0xffffff80093d4808 ( 1747 )
  382. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  383. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  384. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  385. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  386. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  387. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  388. [ 0.000000] Hierarchical RCU implementation.
  389. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  390. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  391. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  392. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  393. [ 0.000000] GIC: Using split EOI/Deactivate mode
  394. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  395. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  396. [ 0.000000] ITS: using cache flushing for cmd queue
  397. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  398. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  399. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  400. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  401. [ 0.000000] GIC: using cache flushing for LPI property table
  402. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  403. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  404. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  405. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  406. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  407. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  408. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  409. [ 0.002186] Console: colour dummy device 80x25
  410. [ 0.002616] console [tty0] enabled
  411. [ 0.002951] bootconsole [uart0] disabled
  412. [ 0.003348] Calibrating delay loop (skipped), value calculated using timer f)
  413. [ 0.003376] pid_max: default: 32768 minimum: 301
  414. [ 0.003501] Security Framework initialized
  415. [ 0.003518] Yama: becoming mindful.
  416. [ 0.003547] AppArmor: AppArmor disabled by boot time parameter
  417. [ 0.003614] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  418. [ 0.003635] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  419. [ 0.004372] Initializing cgroup subsys io
  420. [ 0.004398] Initializing cgroup subsys memory
  421. [ 0.004437] Initializing cgroup subsys devices
  422. [ 0.004458] Initializing cgroup subsys freezer
  423. [ 0.004478] Initializing cgroup subsys net_cls
  424. [ 0.004498] Initializing cgroup subsys perf_event
  425. [ 0.004518] Initializing cgroup subsys net_prio
  426. [ 0.004543] Initializing cgroup subsys hugetlb
  427. [ 0.004560] Initializing cgroup subsys pids
  428. [ 0.004608] ftrace: allocating 45616 entries in 179 pages
  429. [ 0.125974] sched-energy: Sched-energy-costs installed from DT
  430. [ 0.126005] CPU0: update cpu_capacity 401
  431. [ 0.126074] ASID allocator initialised with 32768 entries
  432. [ 0.129408] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  433. [ 0.129953] Platform MSI: /interrupt-controller@fee00000/interrupt-controlled
  434. [ 0.131359] Detected VIPT I-cache on CPU1
  435. [ 0.131391] CPU1: found redistributor 1 region 0:0x00000000fef20000
  436. [ 0.131420] CPU1: using LPI pending table @0x000000007cf30000
  437. [ 0.131468] CPU1: update cpu_capacity 401
  438. [ 0.131472] CPU1: Booted secondary processor [410fd034]
  439. [ 0.132036] Detected VIPT I-cache on CPU2
  440. [ 0.132056] CPU2: found redistributor 2 region 0:0x00000000fef40000
  441. [ 0.132085] CPU2: using LPI pending table @0x000000007cf60000
  442. [ 0.132112] CPU2: update cpu_capacity 401
  443. [ 0.132116] CPU2: Booted secondary processor [410fd034]
  444. [ 0.132657] Detected VIPT I-cache on CPU3
  445. [ 0.132677] CPU3: found redistributor 3 region 0:0x00000000fef60000
  446. [ 0.132704] CPU3: using LPI pending table @0x000000007cfb0000
  447. [ 0.132730] CPU3: update cpu_capacity 401
  448. [ 0.132734] CPU3: Booted secondary processor [410fd034]
  449. [ 0.133323] Detected PIPT I-cache on CPU4
  450. [ 0.133349] CPU4: found redistributor 100 region 0:0x00000000fef80000
  451. [ 0.133388] CPU4: using LPI pending table @0x000000007cff0000
  452. [ 0.133426] CPU4: update cpu_capacity 1024
  453. [ 0.133430] CPU4: Booted secondary processor [410fd082]
  454. [ 0.133999] Detected PIPT I-cache on CPU5
  455. [ 0.134017] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  456. [ 0.134053] CPU5: using LPI pending table @0x000000007c420000
  457. [ 0.134081] CPU5: update cpu_capacity 1024
  458. [ 0.134084] CPU5: Booted secondary processor [410fd082]
  459. [ 0.134173] Brought up 6 CPUs
  460. [ 0.134857] SMP: Total of 6 processors activated.
  461. [ 0.134889] CPU features: detected feature: GIC system register CPU interface
  462. [ 0.134923] CPU features: detected feature: 32-bit EL0 Support
  463. [ 0.134959] CPU: All CPU(s) started at EL2
  464. [ 0.135030] alternatives: patching kernel code
  465. [ 0.136491] devtmpfs: initialized
  466. [ 0.153197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  467. [ 0.153257] futex hash table entries: 2048 (order: 5, 131072 bytes)
  468. [ 0.153751] xor: measuring software checksum speed
  469. [ 0.192974] 8regs : 2855.000 MB/sec
  470. [ 0.233033] 8regs_prefetch: 2561.000 MB/sec
  471. [ 0.273092] 32regs : 3203.000 MB/sec
  472. [ 0.313151] 32regs_prefetch: 2845.000 MB/sec
  473. [ 0.313171] xor: using function: 32regs (3203.000 MB/sec)
  474. [ 0.313207] pinctrl core: initialized pinctrl subsystem
  475. [ 0.314847] Failed to find legacy iommu devices
  476. [ 0.315274] NET: Registered protocol family 16
  477. [ 0.322882] cpuidle: using governor ladder
  478. [ 0.330891] cpuidle: using governor menu
  479. [ 0.331227] vdso: 2 pages (1 code @ ffffff8008c96000, 1 data @ ffffff8009224)
  480. [ 0.331285] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  481. [ 0.331823] DMA: preallocated 1024 KiB pool for atomic allocations
  482. [ 0.441486] raid6: int64x1 gen() 474 MB/s
  483. [ 0.509458] raid6: int64x1 xor() 418 MB/s
  484. [ 0.577594] raid6: int64x2 gen() 655 MB/s
  485. [ 0.645695] raid6: int64x2 xor() 595 MB/s
  486. [ 0.713763] raid6: int64x4 gen() 927 MB/s
  487. [ 0.781852] raid6: int64x4 xor() 669 MB/s
  488. [ 0.849969] raid6: int64x8 gen() 756 MB/s
  489. [ 0.918061] raid6: int64x8 xor() 625 MB/s
  490. [ 0.986205] raid6: neonx1 gen() 995 MB/s
  491. [ 1.054278] raid6: neonx1 xor() 672 MB/s
  492. [ 1.122397] raid6: neonx2 gen() 1322 MB/s
  493. [ 1.190482] raid6: neonx2 xor() 1000 MB/s
  494. [ 1.258571] raid6: neonx4 gen() 1756 MB/s
  495. [ 1.326678] raid6: neonx4 xor() 1171 MB/s
  496. [ 1.394772] raid6: neonx8 gen() 1694 MB/s
  497. [ 1.462889] raid6: neonx8 xor() 1263 MB/s
  498. [ 1.462908] raid6: using algorithm neonx4 gen() 1756 MB/s
  499. [ 1.462928] raid6: .... xor() 1171 MB/s, rmw enabled
  500. [ 1.462946] raid6: using intx1 recovery algorithm
  501. [ 1.464749] vcc3v3_pcie: supplied by dc_12v
  502. [ 1.465303] vcc_sys: supplied by dc_12v
  503. [ 1.465829] vcc3v3_sys: supplied by vcc_sys
  504. [ 1.467001] iommu: Adding device ff650000.vpu_service to group 0
  505. [ 1.467101] iommu: Adding device ff660000.rkvdec to group 1
  506. [ 1.467228] iommu: Adding device ff8f0000.vop to group 2
  507. [ 1.467322] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  508. [ 1.467342] iommu: Removing device ff8f0000.vop from group 2
  509. [ 1.467409] iommu: Adding device ff900000.vop to group 2
  510. [ 1.467913] rk_iommu ff650800.iommu: can't get sclk
  511. [ 1.468202] rk_iommu ff660480.iommu: can't get sclk
  512. [ 1.468456] rk_iommu ff903f00.iommu: can't get sclk
  513. [ 1.468846] SCSI subsystem initialized
  514. [ 1.469208] usbcore: registered new interface driver usbfs
  515. [ 1.469265] usbcore: registered new interface driver hub
  516. [ 1.469362] usbcore: registered new device driver usb
  517. [ 1.469476] media: Linux media interface: v0.10
  518. [ 1.469525] Linux video capture interface: v2.00
  519. [ 1.469648] pps_core: LinuxPPS API ver. 1 registered
  520. [ 1.469669] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  521. [ 1.469713] PTP clock support registered
  522. [ 1.470864] Advanced Linux Sound Architecture Driver Initialized.
  523. [ 1.471419] Bluetooth: Core ver 2.21
  524. [ 1.471462] NET: Registered protocol family 31
  525. [ 1.471481] Bluetooth: HCI device and connection manager initialized
  526. [ 1.471506] Bluetooth: HCI socket layer initialized
  527. [ 1.471532] Bluetooth: L2CAP socket layer initialized
  528. [ 1.471570] Bluetooth: SCO socket layer initialized
  529. [ 1.471963] NetLabel: Initializing
  530. [ 1.471983] NetLabel: domain hash size = 128
  531. [ 1.472001] NetLabel: protocols = UNLABELED CIPSOv4
  532. [ 1.472049] NetLabel: unlabeled traffic allowed by default
  533. [ 1.472928] clocksource: Switched to clocksource arch_sys_counter
  534. [ 1.538790] thermal thermal_zone1: power_allocator: sustainable_power will bd
  535. [ 1.539053] NET: Registered protocol family 2
  536. [ 1.539517] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  537. [ 1.539679] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  538. [ 1.540141] TCP: Hash tables configured (established 16384 bind 16384)
  539. [ 1.540240] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  540. [ 1.540333] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  541. [ 1.540645] NET: Registered protocol family 1
  542. [ 1.541022] RPC: Registered named UNIX socket transport module.
  543. [ 1.541044] RPC: Registered udp transport module.
  544. [ 1.541063] RPC: Registered tcp transport module.
  545. [ 1.541082] RPC: Registered tcp NFSv4.1 backchannel transport module.
  546. [ 1.541907] Trying to unpack rootfs image as initramfs...
  547. [ 1.834034] Freeing initrd memory: 5948K
  548. [ 1.834653] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  549. [ 1.834771] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  550. [ 1.836066] kvm [1]: 8-bit VMID
  551. [ 1.836087] kvm [1]: Hyp mode initialized successfully
  552. [ 1.836234] kvm [1]: interrupt-controller@fff20000 IRQ10
  553. [ 1.836463] kvm [1]: timer IRQ12
  554. [ 1.839782] audit: initializing netlink subsys (disabled)
  555. [ 1.839853] audit: type=2000 audit(1.756:1): initialized
  556. [ 1.840614] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  557. [ 1.848200] VFS: Disk quotas dquot_6.6.0
  558. [ 1.848393] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  559. [ 1.850039] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  560. [ 1.851420] NFS: Registering the id_resolver key type
  561. [ 1.851464] Key type id_resolver registered
  562. [ 1.851483] Key type id_legacy registered
  563. [ 1.851516] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  564. [ 1.852280] fuse init (API version 7.23)
  565. [ 1.853155] JFS: nTxBlock = 8192, nTxLock = 65536
  566. [ 1.858829] SGI XFS with ACLs, security attributes, realtime, no debug enabld
  567. [ 1.861505] Key type big_key registered
  568. [ 1.861593]
  569. [ 1.861593] TEE Core Framework initialization (ver 1:0.1)
  570. [ 1.861637] TEE armv7 Driver initialization
  571. [ 1.862125] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  572. [ 1.862149] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  573. [ 1.862378] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  574. [ 1.866951] NET: Registered protocol family 38
  575. [ 1.867001] Key type asymmetric registered
  576. [ 1.867027] Asymmetric key parser 'x509' registered
  577. [ 1.867234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  578. [ 1.867412] io scheduler noop registered
  579. [ 1.867436] io scheduler deadline registered (default)
  580. [ 1.867486] io scheduler cfq registered
  581. [ 1.869153] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS suppr
  582. [ 1.874546] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  583. [ 1.874801] rk-vcodec ff650000.vpu_service: probe device
  584. [ 1.875034] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  585. [ 1.875605] rk-vcodec ff650000.vpu_service: could not find power_model node
  586. [ 1.875629] rk-vcodec ff650000.vpu_service: init success
  587. [ 1.875881] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  588. [ 1.876313] rk-vcodec ff660000.rkvdec: probe device
  589. [ 1.876527] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  590. [ 1.876947] rk-vcodec ff660000.rkvdec: could not find power_model node
  591. [ 1.876971] rk-vcodec ff660000.rkvdec: init success
  592. [ 1.878445] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  593. [ 1.878482] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  594. [ 1.879988] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  595. [ 1.880024] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  596. [ 1.880586] pwm-regulator: supplied by vcc_sys
  597. [ 1.881341] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  598. [ 1.881978] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud =A
  599. [ 1.882485] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud =A
  600. [ 2.006911] console [ttyS2] enabled
  601. [ 2.008315] [drm] Initialized drm 1.1.0 20060810
  602. [ 2.012794] [drm] Rockchip DRM driver version: v1.0.1
  603. [ 2.013809] usbcore: registered new interface driver udl
  604. [ 2.015744] Unable to detect cache hierarchy for CPU 0
  605. [ 2.017087] brd: module loaded
  606. [ 2.022797] loop: module loaded
  607. [ 2.023125] lkdtm: No crash points registered, enable through debugfs
  608. [ 2.025292] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  609. [ 2.025895] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  610. [ 2.026492] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  611. [ 2.027572] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  612. [ 2.028062] 3 ofpart partitions found on MTD device spi32766.0
  613. [ 2.028589] Creating 3 MTD partitions on "spi32766.0":
  614. [ 2.029083] 0x000000000000-0x0000003f8000 : "loader"
  615. [ 2.030451] 0x0000003f8000-0x000000400000 : "env"
  616. [ 2.031692] 0x0000007c0000-0x000000800000 : "vendor"
  617. [ 2.034643] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  618. [ 2.035285] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  619. [ 2.035798] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  620. [ 2.036327] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  621. [ 2.037081] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  622. [ 2.037707] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  623. [ 2.043263] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  624. [ 2.043886] stmmac - user ID: 0x10, Synopsys ID: 0x35
  625. [ 2.044344] Ring mode enabled
  626. [ 2.044628] DMA HW capability register supported
  627. [ 2.045039] Normal descriptors
  628. [ 2.045359] RX Checksum Offload Engine supported (type 2)
  629. [ 2.045854] TX Checksum insertion supported
  630. [ 2.046241] Wake-Up On Lan supported
  631. [ 2.046616] Enable RX Mitigation via HW Watchdog Timer
  632. [ 2.125338] libphy: stmmac: probed
  633. [ 2.125668] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  634. [ 2.126249] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  635. [ 2.128242] Rockchip WiFi SYS interface (V1.00) ...
  636. [ 2.128776] usbcore: registered new interface driver cdc_ether
  637. [ 2.129370] usbcore: registered new interface driver rndis_host
  638. [ 2.131318] rockchip-dwc3 usb0: failed to get drvdata dwc3
  639. [ 2.136102] rockchip-dwc3 usb1: fail to get drvdata hcd
  640. [ 2.137792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  641. [ 2.138395] ehci-pci: EHCI PCI platform driver
  642. [ 2.138851] ehci-platform: EHCI generic platform driver
  643. [ 2.143135] ehci-platform fe3c0000.usb: EHCI Host Controller
  644. [ 2.143798] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus1
  645. [ 2.144619] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  646. [ 2.156946] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  647. [ 2.157660] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  648. [ 2.158275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  649. [ 2.158934] usb usb1: Product: EHCI Host Controller
  650. [ 2.159378] usb usb1: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  651. [ 2.160149] usb usb1: SerialNumber: fe3c0000.usb
  652. [ 2.161080] hub 1-0:1.0: USB hub found
  653. [ 2.161454] hub 1-0:1.0: 1 port detected
  654. [ 2.162391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  655. [ 2.162964] ohci-platform: OHCI generic platform driver
  656. [ 2.163941] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  657. [ 2.164693] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus2
  658. [ 2.165515] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  659. [ 2.225091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  660. [ 2.225706] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  661. [ 2.226365] usb usb2: Product: Generic Platform OHCI controller
  662. [ 2.226901] usb usb2: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  663. [ 2.227672] usb usb2: SerialNumber: fe3e0000.usb
  664. [ 2.228516] hub 2-0:1.0: USB hub found
  665. [ 2.228888] hub 2-0:1.0: 1 port detected
  666. [ 2.231214] usbcore: registered new interface driver iforce
  667. [ 2.231775] usbcore: registered new interface driver xpad
  668. [ 2.232572] usbcore: registered new interface driver usbtouchscreen
  669. [ 2.233433] .. rk pwm remotectl v1.1 init
  670. [ 2.234053] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/inpu0
  671. [ 2.235592] i2c /dev entries driver
  672. [ 2.237127] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  673. [ 2.237819] fan53555-reg: supplied by vcc_sys
  674. [ 2.240351] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  675. [ 2.241049] fan53555-reg: supplied by vcc_sys
  676. [ 2.243627] rk808 0-001b: Pmic Chip id: 0x0
  677. [ 2.246600] rk808-regulator rk808-regulator: there is no dvs0 gpio
  678. [ 2.247207] rk808-regulator rk808-regulator: there is no dvs1 gpio
  679. [ 2.247854] DCDC_REG1: supplied by vcc_sys
  680. [ 2.249009] DCDC_REG2: supplied by vcc_sys
  681. [ 2.249976] DCDC_REG3: supplied by vcc_sys
  682. [ 2.250643] DCDC_REG4: supplied by vcc_sys
  683. [ 2.251478] LDO_REG1: supplied by vcc_sys
  684. [ 2.252986] LDO_REG2: supplied by vcc_sys
  685. [ 2.254338] LDO_REG3: supplied by vcc_sys
  686. [ 2.255687] LDO_REG4: supplied by vcc_sys
  687. [ 2.257069] LDO_REG5: supplied by vcc_sys
  688. [ 2.258427] LDO_REG6: supplied by vcc_sys
  689. [ 2.259788] LDO_REG7: supplied by vcc_sys
  690. [ 2.261286] LDO_REG8: supplied by vcc_sys
  691. [ 2.262667] SWITCH_REG1: supplied by vcc3v3_sys
  692. [ 2.263391] SWITCH_REG2: supplied by vcc3v3_sys
  693. [ 2.267351] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  694. [ 2.268403] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009c0
  695. [ 2.269787] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009c0
  696. [ 2.271623] fusb302 4-0022: Can't get property of role, set role to default P
  697. [ 2.280582] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, trE
  698. [ 2.281431] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009d0
  699. [ 2.283231] IR NEC protocol handler initialized
  700. [ 2.283648] IR RC5(x/sz) protocol handler initialized
  701. [ 2.284108] IR RC6 protocol handler initialized
  702. [ 2.284522] IR JVC protocol handler initialized
  703. [ 2.284953] IR Sony protocol handler initialized
  704. [ 2.285377] IR SANYO protocol handler initialized
  705. [ 2.285806] IR Sharp protocol handler initialized
  706. [ 2.286237] IR MCE Keyboard/mouse protocol handler initialized
  707. [ 2.286765] IR XMP protocol handler initialized
  708. [ 2.288081] usbcore: registered new interface driver uvcvideo
  709. [ 2.288600] USB Video Class driver (1.1.1)
  710. [ 2.292273] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, te7
  711. [ 2.293288] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  712. [ 2.295085] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-m
  713. [ 2.295859] Bluetooth: Virtual HCI driver ver 1.5
  714. [ 2.296406] Bluetooth: HCI UART driver ver 2.3
  715. [ 2.296815] Bluetooth: HCI UART protocol H4 registered
  716. [ 2.297312] Bluetooth: HCI UART protocol LL registered
  717. [ 2.297778] Bluetooth: HCI UART protocol ATH3K registered
  718. [ 2.298327] usbcore: registered new interface driver bfusb
  719. [ 2.298872] usbcore: registered new interface driver btusb
  720. [ 2.299821] cpu cpu0: bin=1
  721. [ 2.300133] cpu cpu0: leakage=19
  722. [ 2.301546] cpu cpu0: Failed to get pvtm
  723. [ 2.301960] cpu cpu0: bin-scale=34
  724. [ 2.302498] cpu cpu4: bin=1
  725. [ 2.302807] cpu cpu4: leakage=33
  726. [ 2.305323] cpu cpu4: Failed to get pvtm
  727. [ 2.305724] cpu cpu4: bin-scale=17
  728. [ 2.307158] cpu cpu0: avs=0, target-scale=34
  729. [ 2.307565] cpu cpu0: scale_rate=1416000000
  730. [ 2.308101] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
  731. [ 2.309816] cpu cpu4: avs=0, target-scale=17
  732. [ 2.310275] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
  733. [ 2.312283] sdhci: Secure Digital Host Controller Interface driver
  734. [ 2.312842] sdhci: Copyright(c) Pierre Ossman
  735. [ 2.313267] Synopsys Designware Multimedia Card Interface Driver
  736. [ 2.314699] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  737. [ 2.316391] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  738. [ 2.317124] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  739. [ 2.317744] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  740. [ 2.318304] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bio
  741. [ 2.319204] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was.
  742. [ 2.320049] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  743. [ 2.320868] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  744. [ 2.321567] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  745. [ 2.336988] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  746. [ 2.354014] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  747. [ 2.354841] sdhci-pltfm: SDHCI platform and OF driver helper
  748. [ 2.357065] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  749. [ 2.357608] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  750. [ 2.389117] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  751. [ 2.392082] hidraw: raw HID events driver (C) Jiri Kosina
  752. [ 2.397056] usbcore: registered new interface driver usbhid
  753. [ 2.397567] usbhid: USB HID core driver
  754. [ 2.401895] usbcore: registered new interface driver snd-usb-audio
  755. [ 2.403300] es8316 1-0011: Can not read property spk_ctl_gpio
  756. [ 2.411031] u32 classifier
  757. [ 2.411311] Netfilter messages via NETLINK v0.30.
  758. [ 2.411798] ip_set: protocol 6
  759. [ 2.412309] Initializing XFRM netlink socket
  760. [ 2.413353] NET: Registered protocol family 10
  761. [ 2.414795] NET: Registered protocol family 17
  762. [ 2.415223] NET: Registered protocol family 15
  763. [ 2.415656] bridge: automatic filtering via arp/ip/ip6tables has been deprec.
  764. [ 2.416805] Bridge firewalling registered
  765. [ 2.417468] Bluetooth: RFCOMM socket layer initialized
  766. [ 2.418037] Bluetooth: RFCOMM ver 1.11
  767. [ 2.418424] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  768. [ 2.418978] Bluetooth: HIDP socket layer initialized
  769. [ 2.419534] 8021q: 802.1Q VLAN Support v1.8
  770. [ 2.419963] [WLAN_RFKILL]: Enter rfkill_wlan_init
  771. [ 2.420994] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  772. [ 2.421536] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  773. [ 2.422165] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  774. [ 2.422818] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by g.
  775. [ 2.423612] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_w.
  776. [ 2.424455] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not foun!
  777. [ 2.425180] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  778. [ 2.425668] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  779. [ 2.426199] [BT_RFKILL]: Enter rfkill_rk_init
  780. [ 2.427275] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts.
  781. [ 2.428077] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset.
  782. [ 2.428847] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  783. [ 2.429639] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  784. [ 2.431106] [BT_RFKILL]: Request irq for bt wakeup host
  785. [ 2.431675] [BT_RFKILL]: ** disable irq
  786. [ 2.432247] [BT_RFKILL]: bt_default device registered.
  787. [ 2.432866] Key type dns_resolver registered
  788. [ 2.434327] Registered cp15_barrier emulation handler
  789. [ 2.434913] Registered setend emulation handler
  790. [ 2.437047] registered taskstats version 1
  791. [ 2.441044] Btrfs loaded, integrity-checker=on
  792. [ 2.441622] BTRFS: selftest: Running btrfs free space cache tests
  793. [ 2.442210] BTRFS: selftest: Running extent only tests
  794. [ 2.442705] BTRFS: selftest: Running bitmap only tests
  795. [ 2.443203] BTRFS: selftest: Running bitmap and extent tests
  796. [ 2.443752] BTRFS: selftest: Running space stealing from bitmap to extent
  797. [ 2.445863] BTRFS: selftest: Free space cache tests finished
  798. [ 2.446387] BTRFS: selftest: Running extent buffer operation tests
  799. [ 2.446921] BTRFS: selftest: Running btrfs_split_item tests
  800. [ 2.447522] BTRFS: selftest: Running find delalloc tests
  801. [ 2.448681] mmc1: MAN_BKOPS_EN bit is not set
  802. [ 2.464724] mmc1: new HS200 MMC card at address 0001
  803. [ 2.466169] mmcblk1: mmc1:0001 NCard 28.9 GiB
  804. [ 2.467427] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
  805. [ 2.468693] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
  806. [ 2.469823] mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB
  807. [ 2.479246] mmcblk1: p1 p2 p3 p4 p5 p7
  808. [ 2.695459] BTRFS: selftest: Running btrfs_get_extent tests
  809. [ 2.696167] BTRFS: selftest: Running hole first btrfs_get_extent test
  810. [ 2.696758] BTRFS: selftest: Running outstanding_extents tests
  811. [ 2.697345] BTRFS: selftest: Running qgroup tests
  812. [ 2.697767] BTRFS: selftest: Qgroup basic add
  813. [ 2.698198] BTRFS: selftest: Qgroup multiple refs test
  814. [ 2.717303] usb 2-1: new low-speed USB device number 2 using ohci-platform
  815. [ 2.732761] Key type encrypted registered
  816. [ 2.734299] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS suppr
  817. [ 2.740298] rockchip-drm display-subsystem: devfreq is not set
  818. [ 2.741678] rockchip-vop ff900000.vop: missing rockchip,grf property
  819. [ 2.743066] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff)
  820. [ 2.743965] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  821. [ 2.745253] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff)
  822. [ 2.747323] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  823. [ 2.748025] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bur
  824. [ 2.749234] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
  825. [ 2.753646] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xfffff)
  826. [ 2.755884] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  827. [ 2.757469] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  828. [ 2.758385] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8)
  829. [ 2.759181] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  830. [ 2.759819] [drm] No driver support for vblank timestamp query.
  831. [ 2.760817] rockchip-drm display-subsystem: failed to parse loader memory
  832. [ 2.761757] rockchip-drm display-subsystem: No connectors reported connecteds
  833. [ 2.762613] [drm] Cannot find any crtc or sizes - going 1024x768
  834. [ 2.788024] Console: switching to colour frame buffer device 128x48
  835. [ 2.800165] rockchip-drm display-subsystem: fb0: frame buffer device
  836. [ 2.815504] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  837. [ 2.816447] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus n3
  838. [ 2.817498] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110
  839. [ 2.818505] xhci-hcd xhci-hcd.7.auto: irq 228, io mem 0xfe800000
  840. [ 2.819445] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  841. [ 2.820202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  842. [ 2.821065] usb usb3: Product: xHCI Host Controller
  843. [ 2.821610] usb usb3: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  844. [ 2.822545] usb usb3: SerialNumber: xhci-hcd.7.auto
  845. [ 2.823606] hub 3-0:1.0: USB hub found
  846. [ 2.824058] hub 3-0:1.0: 1 port detected
  847. [ 2.824867] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  848. [ 2.825817] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus n4
  849. [ 2.826731] usb usb4: We don't know the algorithms for LPM for this host, di.
  850. [ 2.827734] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  851. [ 2.828485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  852. [ 2.829300] usb usb4: Product: xHCI Host Controller
  853. [ 2.829844] usb usb4: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  854. [ 2.830783] usb usb4: SerialNumber: xhci-hcd.7.auto
  855. [ 2.831869] hub 4-0:1.0: USB hub found
  856. [ 2.832322] hub 4-0:1.0: 1 port detected
  857. [ 2.835496] xhci-hcd xhci-hcd.7.auto: remove, state 1
  858. [ 2.842365] usb usb4: USB disconnect, device number 1
  859. [ 2.868842] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microsecon.
  860. [ 2.875176] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting r.
  861. [ 2.881479] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
  862. [ 2.887697] xhci-hcd xhci-hcd.7.auto: remove, state 1
  863. [ 2.893652] usb usb3: USB disconnect, device number 1
  864. [ 2.900234] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
  865. [ 2.911302] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  866. [ 2.916518] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus n3
  867. [ 2.921891] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110
  868. [ 2.927221] xhci-hcd xhci-hcd.8.auto: irq 229, io mem 0xfe900000
  869. [ 2.932361] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  870. [ 2.937334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  871. [ 2.942290] usb usb3: Product: xHCI Host Controller
  872. [ 2.946998] usb usb3: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  873. [ 2.952078] usb usb3: SerialNumber: xhci-hcd.8.auto
  874. [ 2.958155] hub 3-0:1.0: USB hub found
  875. [ 2.962097] hub 3-0:1.0: 1 port detected
  876. [ 2.964106] usb 2-1: New USB device found, idVendor=1113, idProduct=3163
  877. [ 2.964111] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  878. [ 2.964115] usb 2-1: Product: MEDION MD 86360
  879. [ 2.973058] input: MEDION MD 86360 as /devices/platform/fe3e0000.usb/usb2/2-1
  880. [ 2.983554] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  881. [ 2.990646] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus n4
  882. [ 2.997207] usb usb4: We don't know the algorithms for LPM for this host, di.
  883. [ 3.003860] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  884. [ 3.010219] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  885. [ 3.014756] usb usb4: Product: xHCI Host Controller
  886. [ 3.019044] usb usb4: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  887. [ 3.023727] usb usb4: SerialNumber: xhci-hcd.8.auto
  888. [ 3.028985] hub 4-0:1.0: USB hub found
  889. [ 3.029614] hid-generic 0003:1113:3163.0001: input,hidraw0: USB HID v1.00 Ke0
  890. [ 3.038761] input: MEDION MD 86360 as /devices/platform/fe3e0000.usb/usb2/2-2
  891. [ 3.046633] hub 4-0:1.0: 1 port detected
  892. [ 3.056492] ehci-platform fe380000.usb: EHCI Host Controller
  893. [ 3.063889] ehci-platform fe380000.usb: new USB bus registered, assigned bus5
  894. [ 3.068894] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  895. [ 3.093791] hid-generic 0003:1113:3163.0002: input,hiddev0,hidraw1: USB HID 1
  896. [ 3.097056] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  897. [ 3.097324] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  898. [ 3.097331] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
  899. [ 3.097336] usb usb5: Product: EHCI Host Controller
  900. [ 3.097342] usb usb5: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  901. [ 3.097346] usb usb5: SerialNumber: fe380000.usb
  902. [ 3.145059] hub 5-0:1.0: USB hub found
  903. [ 3.150328] hub 5-0:1.0: 1 port detected
  904. [ 3.156526] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  905. [ 3.162366] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus6
  906. [ 3.168132] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  907. [ 3.229182] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  908. [ 3.234753] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
  909. [ 3.240373] usb usb6: Product: Generic Platform OHCI controller
  910. [ 3.245870] usb usb6: Manufacturer: Linux 4.4.167-1161-rockchip-ayufan-g6f16d
  911. [ 3.250982] usb usb6: SerialNumber: fe3a0000.usb
  912. [ 3.256256] hub 6-0:1.0: USB hub found
  913. [ 3.260870] hub 6-0:1.0: 1 port detected
  914. [ 3.266742] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  915. [ 3.273174] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  916. [ 3.278199] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  917. [ 3.283160] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.sp2
  918. [ 3.288292] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -2
  919. [ 3.293429] asoc-simple-card: probe of spdif-sound failed with error -22
  920. [ 3.361133] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
  921. [ 3.394422] usb 4-1: New USB device found, idVendor=4971, idProduct=8017
  922. [ 3.410326] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  923. [ 3.426199] usb 4-1: Product: USB to ATA/ATAPI Bridge
  924. [ 3.441838] usb 4-1: Manufacturer: JMicron
  925. [ 3.457087] usb 4-1: SerialNumber: 111122223333
  926. [ 3.482193] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mappk
  927. [ 3.488888] asoc-simple-card es8316-sound: ASoC: no source widget found for 1
  928. [ 3.495472] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIASk
  929. [ 3.502147] asoc-simple-card es8316-sound: ASoC: no sink widget found for INP
  930. [ 3.508637] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic JacP
  931. [ 3.515615] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file
  932. [ 3.522113] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file
  933. [ 3.528626] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
  934. [ 3.534033] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
  935. [ 3.539306] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
  936. [ 3.544400] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
  937. [ 3.552478] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  938. [ 3.561376] rk808-rtc rk808-rtc: setting system clock to 2019-03-23 21:28:38)
  939. [ 3.568207] of_cfs_init
  940. [ 3.574343] of_cfs_init: OK
  941. [ 3.601161] vcc3v3_pcie: disabling
  942. [ 3.605186] rk-keypad rockchip-key: no io-channels defined
  943. [ 3.608432] input: rk29-keypad as /devices/platform/rockchip-key/input/input3
  944. [ 3.612475] ALSA device list:
  945. [ 3.616106] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  946. [ 3.638116] #0: rockchip,es8316-codec
  947. [ 3.651317] usb 6-1: new low-speed USB device number 2 using ohci-platform
  948. [ 3.657869] ttyS2 - failed to request DMA, use interrupt mode
  949. [ 3.664150] Freeing unused kernel memory: 1152K
  950. Loading, please wait...
  951. starting version 237
  952. [ 3.761433] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  953. [ 3.858175] usb 6-1: New USB device found, idVendor=046d, idProduct=c31c
  954. [ 3.864291] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  955. [ 3.870326] usb 6-1: Product: USB Keyboard
  956. [ 3.876124] usb 6-1: Manufacturer: Logitech
  957. [ 3.893493] input: Logitech USB Keyboard as /devices/platform/fe3a0000.usb/u4
  958. [ 3.954196] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Ke0
  959. [ 3.969181] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  960. [ 3.983278] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  961. [ 3.994473] input: Logitech USB Keyboard as /devices/platform/fe3a0000.usb/u5
  962. [ 4.004521] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  963. [ 4.006758] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  964. [ 4.008943] rockchip-pcie f8000000.pcie: missing "memory-region" property
  965. [ 4.011263] PCI host bridge /pcie@f8000000 ranges:
  966. [ 4.013236] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  967. [ 4.015196] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  968. [ 4.017590] rockchip-pcie f8000000.pcie: invalid power supply
  969. [ 4.021097] usbcore: registered new interface driver usb-storage
  970. [ 4.034767] scsi host0: uas
  971. [ 4.040758] usbcore: registered new interface driver uas
  972. [ 4.046338] scsi 0:0:0:0: Direct-Access Samsung SSD 750 EVO 120G 8104 P6
  973. [ 4.050379] sd 0:0:0:0: [sda] Spinning up disk...
  974. [ 4.057645] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 De1
  975. [ 4.519660] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  976. [ 4.530316] rockchip-pcie f8000000.pcie: deferred probe failed
  977. [ 4.541060] rockchip-pcie: probe of f8000000.pcie failed with error -110
  978. [ 4.553603] dwmmc_rockchip fe310000.dwmmc: detected pcie initialized, contin.
  979. [ 4.560396] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mod.
  980. [ 4.567036] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  981. [ 4.573586] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  982. [ 4.580171] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bio
  983. [ 4.587163] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was.
  984. [ 4.594178] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  985. [ 4.600768] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  986. [ 4.606649] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  987. [ 4.629067] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  988. [ 4.649033] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  989. [ 4.677161] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz,)
  990. [ 4.737219] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz,)
  991. [ 5.053262] .ready
  992. [ 5.061216] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112)
  993. [ 5.076849] sd 0:0:0:0: [sda] 4096-byte physical blocks
  994. [ 5.093386] sd 0:0:0:0: [sda] Write Protect is off
  995. [ 5.105010] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
  996. [ 5.121888] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
  997. [ 5.135374] sd 0:0:0:0: [sda] Attached SCSI disk
  998. Begin: Loading essential drivers ... done.
  999. Begin: Running /scripts/init-premount ... done.
  1000. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  1001. Begin: Running /scripts/local-premount ... done.
  1002. Warning: fsck not present, so skipping root file system
  1003. [ 5.319479] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opt)
  1004. done.
  1005. Begin: Running /scripts/local-bottom ... done.
  1006. Begin: Running /scripts/init-bottom ... done.
  1007. [ 5.529614] systemd[1]: Failed to insert module 'autofs4': No such file or dy
  1008. [ 5.539996] cgroup: cgroup2: unknown option "nsdelegate"
  1009. [ 5.557999] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SE)
  1010. [ 5.573184] systemd[1]: Detected architecture arm64.
  1011.  
  1012. Welcome to Ubuntu 18.04.2 LTS!
  1013.  
  1014. [ 5.593465] systemd[1]: Set hostname to <rockpro64>.
  1015. [ 5.750053] random: nonblocking pool is initialized
  1016. [ 5.766646] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 co.
  1017. [ 5.776763] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warn)
  1018. [ 5.792505] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Din
  1019. [ 5.950669] systemd[1]: Started Forward Password Requests to Wall Directory .
  1020. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  1021. [ 5.965866] systemd[1]: Created slice User and Session Slice.
  1022. [ OK ] Created slice User and Session Slice.
  1023. [ 5.977180] systemd[1]: Reached target Swap.
  1024. [ OK ] Reached target Swap.
  1025. [ 5.989200] systemd[1]: Starting of Arbitrary Executable File Formats File S.
  1026. [UNSUPP] Starting of Arbitrary Executable Fi��…tem Automount Point not supporte.
  1027. [ 6.001383] systemd[1]: Started ntp-systemd-netif.path.
  1028. [ OK ] Started ntp-systemd-netif.path.
  1029. [ 6.013513] systemd[1]: Reached target User and Group Name Lookups.
  1030. [ OK ] Reached target User and Group Name Lookups.
  1031. [ 6.029541] systemd[1]: Reached target Remote File Systems.
  1032. [ OK ] Reached target Remote File Systems.
  1033. [ 6.045343] systemd[1]: Reached target System Time Synchronized.
  1034. [ OK ] Reached target System Time Synchronized.
  1035. [ 6.058714] systemd[1]: Created slice System Slice.
  1036. [ OK ] Created slice System Slice.
  1037. [ 6.071469] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1038. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  1039. [ 6.089574] systemd[1]: Listening on udev Control Socket.
  1040. [ OK ] Listening on udev Control Socket.
  1041. [ 6.101509] systemd[1]: Listening on Journal Socket (/dev/log).
  1042. [ OK ] Listening on Journal Socket (/dev/log).
  1043. [ 6.114199] systemd[1]: Listening on Journal Audit Socket.
  1044. [ OK ] Listening on Journal Audit Socket.
  1045. [ 6.121921] systemd[1]: Reached target Slices.
  1046. [ OK ] Reached target Slices.
  1047. [ 6.133401] systemd[1]: Listening on udev Kernel Socket.
  1048. [ OK ] Listening on udev Kernel Socket.
  1049. [ 6.145603] systemd[1]: Listening on Journal Socket.
  1050. [ OK ] Listening on Journal Socket.
  1051. [ 6.160417] systemd[1]: Starting Remount Root and Kernel File Systems...
  1052. Starting Remount Root and Kernel File Systems...
  1053. [ 6.181432] systemd[1]: Starting Nameserver information manager...
  1054. Starting Nameserver information manager...
  1055. [ 6.205592] systemd[1]: Starting Set the console keyboard layout...
  1056. Starting Set the console keyboard layout...
  1057. [ 6.219710] systemd[1]: Mounting POSIX Message Queue File System...
  1058. Mounting POSIX Message Queue File System...
  1059. [ 6.233665] systemd[1]: Starting Restore / save the current clock...
  1060. Starting Restore / save the current clock...
  1061. [ 6.252896] systemd[1]: Mounting Kernel Debug File System...
  1062. Mounting Kernel Debug File System...
  1063. [ 6.281535] systemd[1]: Starting udev Coldplug all Devices...
  1064. Starting udev Coldplug all Devices...
  1065. [ 6.303085] systemd[1]: Starting Create Static Device Nodes in /dev...
  1066. Starting Create Static Device Nodes in /dev...
  1067. [ 6.315873] systemd[1]: Starting Load Kernel Modules...
  1068. Starting Load Kernel Modules...
  1069. [ 6.319371] systemd[1]: Created slice system-serial\x2dgetty.slice.
  1070. [ OK ] Created slice system-serial\x2dgetty.slice.
  1071. [ 6.329370] systemd[1]: Listening on Syslog Socket.
  1072. [ OK ] Listening on Syslog Socket.
  1073. [ 6.339123] systemd[1]: Starting Journal Service...
  1074. Starting Journal Service...
  1075. [ 6.354689] systemd[1]: Mounting Huge Pages File System...
  1076. Mounting Huge Pages File System...
  1077. [ 6.374595] systemd[1]: Started Remount Root and Kernel File Systems.
  1078. [ OK ] Started Remount Root and Kernel File Systems.
  1079. [ 6.385971] systemd[1]: Started Set the console keyboard layout.
  1080. [ OK ] Started Set the console keyboard layout.
  1081. [ 6.402092] systemd[1]: Mounted POSIX Message Queue File System.
  1082. [ OK ] Mounted POSIX Message Queue File System.
  1083. [ 6.418579] systemd[1]: Started Restore / save the current clock.
  1084. [ OK ] Started Restore / save the current clock.
  1085. [ 6.433821] systemd[1]: Mounted Kernel Debug File System.
  1086. [ OK ] Mounted Kernel Debug File System.
  1087. [ 6.444214] systemd[1]: Started Create Static Device Nodes in /dev.
  1088. [ OK ] Started Create Static Device Nodes in /dev.
  1089. [ 6.458699] systemd[1]: Started Load Kernel Modules.
  1090. [ OK ] Started Load Kernel Modules.
  1091. [ 6.470169] systemd[1]: Mounted Huge Pages File System.
  1092. [ OK ] Mounted Huge Pages File System.
  1093. [ 6.483161] systemd[1]: Started Nameserver information manager.
  1094. [ OK ] Started Nameserver information manager.
  1095. [ 6.495060] systemd[1]: Reached target Network (Pre).
  1096. [ OK ] Reached target Network (Pre).
  1097. [ 6.508428] systemd[1]: Mounting Kernel Configuration File System...
  1098. Mounting Kernel Configuration File System...
  1099. [ 6.524398] systemd[1]: Starting Apply Kernel Variables...
  1100. Starting Apply Kernel Variables...
  1101. [ 6.541276] systemd[1]: Mounting FUSE Control File System...
  1102. Mounting FUSE Control File System...
  1103. [ OK ] Reached target Local File Systems (Pre).
  1104. Starting udev Kernel Device Manager...
  1105. Starting Load/Save Random Seed...
  1106. [ OK ] Mounted Kernel Configuration File System.
  1107. [ OK ] Started Apply Kernel Variables.
  1108. [ OK ] Mounted FUSE Control File System.
  1109. [ OK ] Started Load/Save Random Seed.
  1110. [ OK ] Started Journal Service.
  1111. Starting Flush Journal to Persistent Storage...
  1112. [ OK ] Started udev Coldplug all Devices.
  1113. [ OK ] Started udev Kernel Device Manager.
  1114. Starting Network Service...
  1115. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  1116. [ OK ] Reached target Local Encrypted Volumes.
  1117. [UNSUPP] Starting of Arbitrary Executable Fi��…tem Automount Point not supporte.
  1118. [UNSUPP] Starting of Arbitrary Executable Fi��…tem Automount Point not supporte.
  1119. [ OK ] Started Network Service.
  1120. Starting Wait for Network to be Configured...
  1121. [ 6.818444] xhci-hcd xhci-hcd.8.auto: ERROR Transfer event for disabled endpg
  1122. [ 6.822935] xhci-hcd xhci-hcd.8.auto: @0000000077b41720 00000000 00000000 1b1
  1123. [ OK ] Started Flush Journal to Persistent Storage.
  1124. [ OK ] Reached target Sound Card.
  1125. [ OK ] Found device /dev/ttyS2.
  1126. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  1127. Starting Load/Save RF Kill Switch Status...
  1128. [ OK ] Started Load/Save RF Kill Switch Status.
  1129. [ OK ] Found device SSD_750_EVO_120G boot.
  1130. Mounting /boot/efi...
  1131. [ OK ] Mounted /boot/efi.
  1132. [ OK ] Reached target Local File Systems.
  1133. Starting Tell Plymouth To Write Out Runtime Data...
  1134. Starting Raise network interfaces...
  1135. Starting Create Volatile Files and Directories...
  1136. Starting Set console font and keymap...
  1137. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  1138. [ OK ] Started Set console font and keymap.
  1139. [ OK ] Started Create Volatile Files and Directories.
  1140. Starting Network Name Resolution...
  1141. Starting Network Time Synchronization...
  1142. Starting Update UTMP about System Boot/Shutdown...
  1143. [ OK ] Started Update UTMP about System Boot/Shutdown.
  1144. [ OK ] Started Network Time Synchronization.
  1145. [ OK ] Reached target System Initialization.
  1146. [ OK ] Started CUPS Scheduler.
  1147. [ OK ] Started Trigger anacron every hour.
  1148. [ OK ] Started Daily Cleanup of Temporary Directories.
  1149. [ OK ] Started Message of the Day.
  1150. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  1151. Starting Socket activation for snappy daemon.
  1152. [ OK ] Started Daily apt download activities.
  1153. [ OK ] Started Daily apt upgrade and clean activities.
  1154. [ OK ] Listening on D-Bus System Message Bus Socket.
  1155. [ OK ] Started resolvconf-pull-resolved.path.
  1156. [ OK ] Reached target Paths.
  1157. [ OK ] Started Discard unused blocks once a week.
  1158. [ OK ] Reached target Timers.
  1159. [ OK ] Listening on CUPS Scheduler.
  1160. [ OK ] Started Network Name Resolution.
  1161. [ OK ] Started Raise network interfaces.
  1162. [ OK ] Listening on Socket activation for snappy daemon.
  1163. [ OK ] Reached target Sockets.
  1164. [ OK ] Reached target Basic System.
  1165. Starting Start bluetooth on ttyS0...
  1166. Starting Dispatcher daemon for systemd-networkd...
  1167. Starting Modem Manager...
  1168. Starting System Logging Service...
  1169. Starting Resets System Activity Data Collector...
  1170. [ OK ] Started ntp-systemd-netif.service.
  1171. [ OK ] Started Run anacron jobs.
  1172. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  1173. [ OK ] Started Set the CPU Frequency Scaling governor.
  1174. Starting Generate SSH keys if not there...
  1175. Starting Rock 64 First boot...
  1176. Starting LSB: Speech Dispatcher...
  1177. [ OK ] Started CUPS Scheduler.
  1178. Starting Initialize hardware monitoring sensors...
  1179. Starting resolvconf-pull-resolved.service...
  1180. Starting Initializes zram swaping...
  1181. Starting Save/Restore Sound Card State...
  1182. Starting LSB: automatic crash report generation...
  1183. Starting Restore /etc/resolv.conf i��…fore the ppp link was shut down..
  1184. [ OK ] Started D-Bus System Message Bus.
  1185. Starting WPA supplicant...
  1186. Starting Network Manager...
  1187. Starting Disk Manager...
  1188. Starting Accounts Service...
  1189. Starting Login Service...
  1190. Starting Avahi mDNS/DNS-SD Stack...
  1191. [ OK ] Started Regular background program processing daemon.
  1192. Starting Snappy daemon...
  1193. [ OK ] Reached target Host and Network Name Lookups.
  1194. [ OK ] Started System Logging Service.
  1195. [ OK ] Started Resets System Activity Data Collector.
  1196. [ OK ] Started Generate SSH keys if not there.
  1197. [ OK ] Started Rock 64 First boot.
  1198. [ OK ] Started resolvconf-pull-resolved.service.
  1199. [FAILED] Failed to start Initializes zram swaping.
  1200. See 'systemctl status zram-config.service' for details.
  1201. [ OK ] Started Restore /etc/resolv.conf if��…before the ppp link was shut dow.
  1202. [ OK ] Started Initialize hardware monitoring sensors.
  1203. [ OK ] Started Save/Restore Sound Card State.
  1204. [ OK ] Started LSB: Speech Dispatcher.
  1205. [ OK ] Started Start bluetooth on ttyS0.
  1206. [ OK ] Started LSB: automatic crash report generation.
  1207. [ OK ] Started WPA supplicant.
  1208. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  1209. [ OK ] Started Login Service.
  1210. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  1211. [ OK ] Started Dispatcher daemon for systemd-networkd.
  1212. Starting Hostname Service...
  1213. Starting LSB: set CPUFreq kernel parameters...
  1214. [ OK ] Started Make remote CUPS printers available locally.
  1215. Starting Authorization Manager...
  1216. Starting Bluetooth service...
  1217. [ OK ] Started Snappy daemon.
  1218. Starting Wait until snapd is fully seeded...
  1219. [ OK ] Started Authorization Manager.
  1220. [ OK ] Started Bluetooth service.
  1221. [ OK ] Started Accounts Service.
  1222. [ OK ] Reached target Bluetooth.
  1223. [ OK ] Stopped target Bluetooth.
  1224. [ OK ] Started Wait until snapd is fully seeded.
  1225. [ OK ] Started Modem Manager.
  1226. [ OK ] Started Hostname Service.
  1227. [ OK ] Started Network Manager.
  1228. Starting Network Manager Script Dispatcher Service...
  1229. [ OK ] Reached target Network.
  1230. Starting Permit User Sessions...
  1231. Starting OpenBSD Secure Shell server...
  1232. Starting OpenVPN service...
  1233. [ OK ] Started Unattended Upgrades Shutdown.
  1234. Starting Network Manager Wait Online...
  1235. [ OK ] Started Permit User Sessions.
  1236. [ OK ] Started OpenVPN service.
  1237. [ OK ] Started Network Manager Script Dispatcher Service.
  1238. [ OK ] Started Disk Manager.
  1239. Starting Light Display Manager...
  1240. Starting Hold until boot process finishes up...
  1241. [ OK ] Started OpenBSD Secure Shell server.
  1242. [ OK ] Started Network Manager Wait Online.
  1243. [ OK ] Started Hold until boot process finishes up.
  1244. Starting Set console scheme...
  1245. [ OK ] Started Serial Getty on ttyS2.
  1246. [ OK ] Started Set console scheme.
  1247. [ OK ] Created slice system-getty.slice.
  1248. [ OK ] Started Getty on tty1.
  1249. [ OK ] Reached target Login Prompts.
  1250. [ OK ] Started LSB: set CPUFreq kernel parameters.
  1251. [ OK ] Started Light Display Manager.
  1252. [ OK ] Stopped Light Display Manager.
  1253. Starting Light Display Manager...
  1254. [ OK ] Started Light Display Manager.
  1255. [ OK ] Started Wait for Network to be Configured.
  1256. Starting resolvconf-pull-resolved.service...
  1257. [ OK ] Started ntp-systemd-netif.service.
  1258. [ OK ] Reached target Network is Online.
  1259. [ OK ] Started crash report submission daemon.
  1260. Starting Tool to automatically coll��… submit kernel crash signatures..
  1261. Starting LSB: disk temperature monitoring daemon...
  1262. [ OK ] Started Tool to automatically colle��…nd submit kernel crash signature.
  1263. [ OK ] Started LSB: disk temperature monitoring daemon.
  1264. [ OK ] Reached target Multi-User System.
  1265. [ OK ] Reached target Graphical Interface.
  1266. Starting Update UTMP about System Runlevel Changes...
  1267. [ OK ] Started Update UTMP about System Runlevel Changes.
  1268. [ OK ] Started resolvconf-pull-resolved.service.
  1269.  
  1270. Ubuntu 18.04.2 LTS rockpro64 ttyS2
  1271.  
  1272. rockpro64 login:
RAW Paste Data