4g both usb

pfsense 4g
boot flash internal port
64 MB ext usb

----------------------------------------------------------------


POST: 0123456789bcefghipsajklnopqr,,,tvwxy








comBIOS ver. 1.41a  20111203  Copyright (C) 2000-2011 Soekris Engineering.

net6501

1024 Mbyte Memory                        CPU Atom E6xx 1000 Mhz


SATA AHCI BIOS ver. 0.6 20110902  Copyright (C) 2003-2011 Intel Corporation

Controller Bus#02, Device#06, Function#00: 02 Ports
No device found

Soekris USB Expansion ROM ver. 1.01  20111203

80: USB 01  SanDisk Cruzer Fit      Xlt 973-255-63  7816 Mbyte


Initializing Intel(R) Boot Agent GE v1.3.72
PXE 2.1 Build 089 (WfM 2.0)

 Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int
--------------------------------------------------------------------
00:00:0 8086 4114 06000003 0007 0000 00 00 00 00000000 00000000
00:23:0 8086 8184 06040000 0107 0010 08 00 01 1FFF1000 A0FFA000 10
00:24:0 8086 8185 06040000 0107 0010 08 00 01 3FFF2000 A2FFA100 11
00:25:0 8086 8180 06040000 0107 0010 08 00 01 5FFF4000 A4FFA300 05
00:26:0 8086 8181 06040000 0107 0010 08 00 01 0FFF1000 00FFA000 09
00:31:0 8086 8186 06010000 0003 0000 00 00 80 00000000 00000000
02:02:0 8086 8804 0C031001 0106 0010 00 00 80 A0000B00 00000000 09
02:02:1 8086 8805 0C031001 0106 0010 00 00 80 A0000C00 00000000 09
02:02:2 8086 8806 0C031001 0106 0010 00 00 80 A0000D00 00000000 09
02:02:3 8086 8807 0C032001 0106 0010 00 00 80 A0000E00 00000000 09
02:06:0 8086 880B 01060101 0107 0010 00 00 00 00000000 00000000 11
02:08:0 8086 880C 0C031001 0106 0010 00 00 80 A0004800 00000000 10
02:08:1 8086 880D 0C031001 0106 0010 00 00 80 A0004900 00000000 10
02:08:2 8086 880E 0C031001 0106 0010 00 00 80 A0004A00 00000000 10
02:08:3 8086 880F 0C032001 0106 0010 00 00 80 A0004B00 00000000 10
02:10:1 8086 8811 07000200 0107 0010 00 00 80 00001041 A0004D00 09
02:10:2 8086 8812 07000200 0107 0010 00 00 80 00001049 A0004D10 09
02:12:2 8086 8817 0C800000 0106 0010 00 00 80 00000000 A0005000 05
02:12:3 8086 8818 0C090000 0106 0010 00 00 80 00000000 A0005200 05
03:00:0 111D 803A 0604000E 0107 0010 08 00 01 3FFF2000 A2FFA100
05:00:0 8086 10D3 02000000 0107 0010 08 00 00 A1000000 00000000 09
06:00:0 8086 10D3 02000000 0107 0010 08 00 00 A2000000 00000000 10
08:00:0 111D 803A 0604000E 0107 0010 08 00 01 5FFF4000 A4FFA300
10:00:0 8086 10D3 02000000 0107 0010 08 00 00 A3000000 00000000 10
11:00:0 8086 10D3 02000000 0107 0010 08 00 00 A4000000 00000000 11

 1 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.

1  pfSense
2  pfSense

F6 PXE
Boot:  1
/boot.config: -h
Consoles: serial port
BIOS drive C: is disk0
BIOS 627kB/1047424kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org, Mon Dec 12 18:43:24 EST 2011)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x8a1d18 data=0x3c9e54+0x9b6a0 syms=[0x4+0x94100+0x4+0xcaf47]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:59:41 EST 2011
    root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU        @ 1.00GHz (1000.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x20661  Family = 6  Model = 26  Stepping = 1
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 1073610752 (1023 MB)
avail memory = 1032044544 (984 MB)
ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309)
MPTable: <Soekris  net6501     >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0710010, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07100b0, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc0883050, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0710150, 0) error 1
ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 23.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <unknown> at device 0.0 (no driver attached)
pci2: <network, ethernet> at device 0.1 (no driver attached)
pci2: <unknown> at device 0.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2
ohci2: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci2: <serial bus, USB> at device 2.4 (no driver attached)
pci2: <base peripheral, SD host controller> at device 4.0 (no driver attached)
pci2: <base peripheral, SD host controller> at device 4.1 (no driver attached)
atapci0: <Intel AHCI controller> port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI v1.10 controller with 2 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci3: <OHCI (generic) USB controller> mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2
ohci4: [ITHREAD]
usbus5: <OHCI (generic) USB controller> on ohci4
ohci5: <OHCI (generic) USB controller> mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2
ohci5: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pci2: <unknown> at device 10.0 (no driver attached)
pci2: <simple comms, UART> at device 10.1 (no driver attached)
pci2: <simple comms, UART> at device 10.2 (no driver attached)
pci2: <simple comms, UART> at device 10.3 (no driver attached)
pci2: <simple comms, UART> at device 10.4 (no driver attached)
pci2: <unknown> at device 12.0 (no driver attached)
pci2: <serial bus> at device 12.1 (no driver attached)
pci2: <serial bus> at device 12.2 (no driver attached)
pci2: <serial bus> at device 12.3 (no driver attached)
pci2: <unknown> at device 12.4 (no driver attached)
pcib3: <PCI-PCI bridge> irq 17 at device 24.0 on pci0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci4
pci5: <PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib6: <PCI-PCI bridge> at device 3.0 on pci4
pci6: <PCI bus> on pcib6
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
pcib7: <PCI-PCI bridge> at device 4.0 on pci4
pci7: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> irq 18 at device 25.0 on pci0
pci8: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 2.0 on pci9
pci10: <PCI bus> on pcib10
em2: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10
em2: Using MSIX interrupts with 3 vectors
em2: [ITHREAD]
em2: [ITHREAD]
em2: [ITHREAD]
pcib11: <PCI-PCI bridge> at device 3.0 on pci9
pci11: <PCI bus> on pcib11
em3: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11
em3: Using MSIX interrupts with 3 vectors
em3: [ITHREAD]
em3: [ITHREAD]
em3: [ITHREAD]
pcib12: <PCI-PCI bridge> at device 4.0 on pci9
pci12: <PCI bus> on pcib12
pcib13: <PCI-PCI bridge> irq 19 at device 26.0 on pci0
pci13: <PCI bus> on pcib13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
cpu0 on motherboard
cpu1 on motherboard
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: parallel port not found.
uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <(0x8086)> at usbus0
uhub0: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <(0x8086)> at usbus1
uhub1: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <(0x8086)> at usbus2
uhub2: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
usbus4: 12Mbps Full Speed USB v1.0
uhub2: 1 port with 1 removable, self powered
ugen4.1: <(0x8086)> at usbus4
uhub4: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
ugen5.1: <(0x8086)> at usbus5
uhub5: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <(0x8086)> at usbus6
uhub6: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
usbus7: 480Mbps High Speed USB v2.0
uhub4: 1 port with 1 removable, self powered
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
SMP: AP CPU #1 Launched!
uhub5: 1 port with 1 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus3
uhub6: 1 port with 1 removable, self powered
uhub3: 3 ports with 3 removable, self powered
Root mount waiting for: usbus7 usbus3
uhub7: 3 ports with 3 removable, self powered
ugen0.2: <LEXR PLUG DRIVE> at usbus0
nguemna7s.s20::  <<SLaEnXDRi sPkL>U Ga tD RuIsVbEu>s 7o
  usbus0
umass1: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 2> on usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Tryidnag0  taot  muomuansts -rsoiomt1  fbruosm  1u fssc:b/udse0v /tuafrsg/eptf s0e nlsuen0
R
zOdOaT0 :M O<USNaTn DEiRsRkO RC:r u
 eIrf  Fyiotu  1h.a2v6e>  iRnevmaolviadb lmeo uDnitr eocptt iAocncse,s sr eSbCoStIt-,5  adnedv ifcier s
r dtar0y:  t4h0e. 0f0o0lMlBo/wsi ntgr afnrsofme
hst
3ed al0o:a d7e6r3 3pMrBo m(p1t5:6
43
w0 8   5 1 2s ebty tvef ss.ercotootr.sm:o u2n5t5fHr o6m3.So/pTt i9o7n3sC=)r


and then remove invaldiad1  maotu nutm aospst-isoinms0  fbruosm  0/ estccb/ufss1g atba.r
te
a L0o alduenr  0v
Xrdiaa1b:l e<sL:E
 AvRf sD.IrGoIoTtA.Lm oFuInLtMf r/oWm1=.u>f sR:e/mdoevva/bulfes /Dpifrseecnts eAcc
.evsfss .SrCoSoIt-.2m oduenvtifcreo m
sodpat1i:o n1s.=0r0o0,MsBy/nsc ,tnroaantsifmeer


HMaa1n:u a6l1 MrBo o(t1 2f5i9l5e2s y5s1t2e mb ystpee csiefcitcoartsi:o n6:4
<  3 2<Sf/sTt y6p1eC>):
rdevice>  Mount <device> using fGiElOeMs:y sdtae0ms 1<:f sgteyopmee>t
 y   d o e s   n o t   m a t c h   l a b e l   (e1g6.h ,u6f3ss: /!d=e v2/5d5ah0,)613as
 .
                      eg. cd9660:/dev/acd0
                       This is equivalent to: mount -t cd9660 /dev/acd0 /

  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> GEOM: da0s2: geometry does not match label (16h,63s != 255h,63s).
?

List of GEOM managed disk devices:
  msdosfs/USB MEMORY da1s1 ufs/pfsense1 ufs/pfsense0 ufsid/4ee6a8ade180251f da1 ufs/cf ufsid/4ee6b1ad1fcce77b da0s2a da0s1a da0s3 da0s2 da0s1 da0
Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/pfsense0
vfs.root.mountfrom.options=ro,sync,noatime

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:/dev/da0s1a
                       eg. cd9660:/dev/acd0
                       This is equivalent to: mount -t cd9660 /dev/acd0 /

  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> ufs:/dev/ufs/pfsense0
Trying to mount root from ufs:/dev/ufs/pfsense0
WARNING: / was not properly dismounted
Invalid time in real time clock.
Check and reset the date immediately!
Configuring crash dumps...
Mounting filesystems...
Setting up embedded specific environment... done.
WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
mount: /dev/ufs/pfsense0 : Operation not permitted
** /dev/ufs/pfsense0
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
6054 files, 284794 used, 3505314 free (634 frags, 438085 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
** /dev/ufs/cf
** Last Mounted on /cf
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
7 files, 38 used, 101017 free (25 frags, 12624 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

     ___
 ___/ f \
/ p \___/ Sense
\___/   \
    \___/

Welcome to pfSense 2.0.1-RELEASE  ...

Creating symlinks......done.
External config loader 1.0 is now starting... da1s1 da0s3
Launching the init system... done.
Initializing............................ done.
Starting device manager (devd)...done.
Loading configuration......done.

Network interface mismatch -- Running interface assignment option.

Valid interfaces are:

em0   00:00:24:ce:80:70   (up) Intel(R) PRO/1000 Network Connection 7.2.3
em1   00:00:24:ce:80:71   (up) Intel(R) PRO/1000 Network Connection 7.2.3
em2   00:00:24:ce:80:72   (up) Intel(R) PRO/1000 Network Connection 7.2.3
em3   00:00:24:ce:80:73   (up) Intel(R) PRO/1000 Network Connection 7.2.3

Do you want to set up VLANs first?

If you are not going to use VLANs, or only for optional interfaces, you should
say no here and use the webConfigurator to configure VLANs later, if required.

Do you want to set up VLANs now [y|n]?