Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [176]HELLO! BOOT0 is starting!
- [179]boot0 commit : 8
- [193]PMU: AXP806
- [197]set pll start
- [200]set pll end
- [201]rtc[0] value = 0x00000000
- [204]rtc[1] value = 0x00000000
- [207]rtc[2] value = 0x00000000
- [211]rtc[3] value = 0x00000000
- [214]rtc[4] value = 0x00000000
- [217]rtc[5] value = 0x00000000
- [220]DRAM VERSION IS V2_1
- [222]PMU:Set DDR Vol 1200mV OK.
- [226]PMU:Set DDR Vol 1200mV OK.
- [232]DRAM CLK =900 MHZ
- [235]DRAM Type =7 (3:DDR3,4:DDR4,6:LPDDR2,7:LPDDR3)
- [240]DRAM zq value: 003b3bfb
- [243]IPRD=005e005d--PGCR0=00000f5d--PLL=b0004a00
- [248]DRAM SIZE =2048 M
- [256]DRAM simple test OK.
- [259]dram size =2048
- [262]card no is 0
- [263]sdcard 0 line count 4
- [266][mmc]: mmc driver ver 2017-03-14 13:56
- [270][mmc]: sdc0 spd mode error, 2
- [274][mmc]: mmc 0 bias 00000000
- [282][mmc]: Wrong media type 0x00000000
- [286][mmc]: ***Try SD card 0***
- [306][mmc]: HSSDR52/SDR25 4 bit
- [309][mmc]: 50000000 Hz
- [311][mmc]: 30436 MB
- [313][mmc]: ***SD/MMC 0 init OK!!!***
- [454]Loading boot-pkg Succeed(index=0).
- [457]Entry_name = u-boot
- [473]Entry_name = parameter
- [476]Entry_name = monitor
- [480]Entry_name = scp
- [489]set arisc reset to de-assert state
- [493]Entry_name = soc-cfg
- [497]Entry_name = dtb
- [500]Entry_name = board-cfg
- [504]Entry_name = board-fex
- [507]Entry_name = esm-img
- [510]Ready to disable icache.
- [513]Jump to secend Boot.
- INFO: Configuring SPC Controller
- NOTICE: BL3-1: v1.0(debug):7408d88
- NOTICE: BL3-1: Built : 20:42:28, Aug 29 2017
- NOTICE: BL3-1 commit: 7408d88f80cb14038350a8f55a280fd0c4caf626
- INFO: BL3-1: Initializing runtime services
- ERROR: Error initializing runtime service tspd_fast
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x4a000000
- INFO: BL3-1: Next image spsr = 0x1d3
- U-Boot 2014.07 (Jan 16 2018 - 17:11:44) Allwinner Technology
- uboot commit : 45702b0735dc2297157223f120f495d474b93dd1
- secure enable bit: 0
- normal mode: with secure monitor
- I2C: ready
- [0.561]pmbus: ready
- u0:91c8335
- [0.561][ARISC] :arisc initialize
- [0.585][ARISC] :arisc para ok
- [SCP] :sunxi-arisc driver begin startup 2
- [SCP] :arisc version: [v0.2.30]
- [SCP] :sunxi-arisc driver v1.10 is starting
- [0.599][ARISC] :sunxi-arisc driver startup succeeded
- [0.600]PMU: AXP806
- [0.600]PMU: AXP806 found
- [0.600]bat_vol=0, ratio=0
- axp=axp806, supply=bldo2, vol=1800
- axp=, supply=, vol=0
- [0.604]set power on vol to default
- [0.604]dcdca_vol = 1000, onoff=1
- [0.608]aldo2_vol = 3300, onoff=1
- [0.612]find power_sply to end
- [0.613]PMU: cpux 1320 Mhz,AXI=440 Mhz
- PLL6=600 Mhz,AHB1=200 Mhz, APB1=150Mhz MBus=400Mhz
- DRAM: 2 GiB
- [0.615]fdt addr: 0xb6cd0320
- [0.616]gd->fdt_size: 0x17da0
- Relocation Offset is: 75d92000
- gic: sec monitor mode
- [box standby] read rtc = 0x0
- [box standby] start_type = 0x1
- [box standby] to kernel
- ir boot recovery not used
- [0.706][key recovery] no key press.
- [0.706]power on cpu1
- [0.706][cpu1]task entry
- [0.706][cpu1]PowerBus = 0( 2:vBus 3:acBus other: not exist)
- [0.706][cpu1]no battery exist
- [0.706]start
- [cpu1]drv_disp_init
- [cpu1]init_clocks: finish init_clocks.
- [0.714][cpu1]HDMI 2.0 driver init start!
- [0.716]power on cpu2
- workmode = 0,storage type = 1
- [0.716]MMC: 0
- [0.716][mmc]: mmc driver ver 2017-09-4 10:12:00
- [0.716][cpu2]task entry
- [cpu1]__clk_enable: clk is null.
- [0.721][cpu2]ready to work
- [0.724][cpu1]hdmi cec clk enable failed!
- [cpu2]bmp lzma decode err
- SUNXI SD/MMC: 0[0.733][cpu2]cpu 2 enter wfi mode
- [0.730][cpu1]enable ddc_scl pin
- [0.740][cpu1]enable ddc_sda pin
- [0.743][cpu1]enable hmid cec pin
- [0.745][mmc]: media type 0x0
- [cpu1]pwm_request: reg = 0x300a000. pwm = 1.
- [0.748][mmc]: Wrong media type 0x0
- [cpu1]request pwm success, pwm = 1.
- [0.755][mmc]: ************Try SD card 0************
- [cpu1]speed=200000, slave=16
- [0.782][mmc]: host caps: 0x27
- [0.782][mmc]: MID 03 PSN e24f4995
- [0.782][mmc]: PNM SC32G -- 0x53-43-33-32-47
- [0.782][mmc]: PRV 8.0
- [0.782][mmc]: MDT m-9 y-2017
- [0.782][mmc]: bus_width : 4 bit
- [0.783][mmc]: user capacity : 30436 MB
- [0.787][mmc]: SD/MMC 0 init OK!!!
- [0.793][mmc]: End mmc_init_boot
- [0.793]sunxi flash init ok
- crc mbr copy[0] failed
- crc mbr copy[1] failed
- crc mbr copy[2] failed
- crc mbr copy[3] failed
- [0.804]try to burn key
- fail to find part named env
- Using default environment
- --------fastboot partitions--------
- mbr not exist
- base bootcmd=run mmcbootcmd
- bootcmd set setargs_mmc
- no misc partition is found
- [0.822]to be run cmd=run mmcbootcmd
- mac string is 00:00:00:00:00:00
- cann't get the boot_base from the env
- read item0 copy0
- Item0 (Map) magic is bad
- the secure storage item0 copy0 is bad
- read item0 copy1
- Item0 (Map) magic is bad
- the secure storage item0 copy0 == copy1, the data is good
- the secure storage map is empty
- check user data form private
- the private part isn't exist
- [0.858]update dtb dram start
- [0.859]update dtb dram end
- serial is: 0c000141043e24881dcb
- Net: phy_mode=rgmii, phy_interface=6
- eth0
- [0.873]inter uboot shell
- Hit any key to stop autoboot: 1 [cpu1]drv_disp_init finish
- [cpu1]hdmi hdcp not enable!
- [cpu1]hdmi hpd out, force open?
- [cpu1]save_int_to_kernel disp.init_disp(0x20b040a) code:<no error>
- [cpu1]invalid display config
- [cpu1]save disp device failed
- [cpu1]size=0x384000, ram_size=0x80000000, FRAME_BUFFER_SIZE=0x1000000
- [0.976]end
- [cpu1]advert_enable not set
- [1.030][cpu1]cpu 1 enter wfi mode
- 0
- Loading orangepi uEnv.txt from 40000000 ...
- reading uEnv.txt
- [1.876][mmc]: blkcnt should not be 0
- 140 bytes read in 1 ms (136.7 KiB/s)
- Loading boot environment ...
- ## Error: Can't overwrite "ethaddr"
- himport_r: can't insert "ethaddr=72:d6:05:4f:b9:3b" into hash table
- reading boot.scr
- ** Unable to read file boot.scr **
- Booting with defaults ...
- Loading orangepi orangepi/OrangePiH6.dtb from 44000000 ...
- reading orangepi/OrangePiH6.dtb
- 95389 bytes read in 8 ms (11.4 MiB/s)
- Loading orangepi orangepi/uImage from 4007ffc0 ...
- reading orangepi/uImage
- 13877496 bytes read in 580 ms (22.8 MiB/s)
- reading initrd.img
- 1090786 bytes read in 47 ms (22.1 MiB/s)
- Loading orangepi initrd.img from 44300000 ...
- bootm kernel:4007ffc0 initrd:44300000 ...
- bootm initd_size:10a4e2 fdt_addr:44000000 ...
- ## Booting kernel from Legacy Image at 4007ffc0 ...
- Image Name: OrangePiH6
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 13877432 Bytes = 13.2 MiB
- Load Address: 40080000
- Entry Point: 40080000
- Verifying Checksum ... OK
- XIP Kernel Image ... OK
- reserving fdt memory region: addr=40020000 size=800
- reserving fdt memory region: addr=48000000 size=1000000
- reserving fdt memory region: addr=48100000 size=4000
- reserving fdt memory region: addr=48104000 size=1000
- reserving fdt memory region: addr=48105000 size=1000
- Loading Ramdisk to b6b71000, end b6c7b4e2 ... OK
- Using Device Tree in place at 44000000, end 4401ad9f
- Starting kernel ...
- INFO: BL3-1: Next image address = 0x40080000
- INFO: BL3-1: Next image spsr = 0x3c5
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.65 (xunlong@xunlong) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #35 SMP PREEMPT Tue Jan 23 18:13:02 CST 2018
- [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000] Machine: sun50iw6
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] cma: CMA: reserved 16 MiB at bf000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv0.2 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc07ef80000 s20224 r8192 d20736 u49152
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
- [ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend earlyprintk=sunxi-uart,0x05000000 mac_addr=72:D6:05:4F:B9:3B root=/dev/mmcblk0p2 ro rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Memory: 2048MB = 2048MB total
- [ 0.000000] Memory: 2016128k/2016128k available, 81024k reserved
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
- [ 0.000000] vmemmap : 0xffffffbc00e00000 - 0xffffffbc02a00000 ( 28 MB)
- [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
- [ 0.000000] .init : 0xffffffc000b7c000 - 0xffffffc000c0af00 ( 572 kB)
- [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000b7b924 ( 11247 kB)
- [ 0.000000] .data : 0xffffffc000c0b000 - 0xffffffc000dbc0b8 ( 1733 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 8388608 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.030000] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.030009] pid_max: default: 32768 minimum: 301
- [ 0.034601] Security Framework initialized
- [ 0.038535] SELinux: Initializing.
- [ 0.040156] Mount-cache hash table entries: 256
- [ 0.044951] Initializing cgroup subsys debug
- [ 0.048615] Initializing cgroup subsys memory
- [ 0.050023] Initializing cgroup subsys freezer
- [ 0.054368] ftrace: allocating 30235 entries in 119 pages
- [ 0.080600] CPU0: update cpu_power 1024
- [ 0.080656] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
- [ 0.081523] virtual base = 0xffffff800000a000.
- [ 0.081574] gicd_base = 0xffffff800000c000.
- [ 0.081615] gicc_base = 0xffffff800000e000.
- [ 0.083437] CPU1: Booted secondary processor
- [ 0.083437] CPU1: update cpu_power 1024
- [ 0.083478] CPU2: Booted secondary processor
- [ 0.083478] CPU2: update cpu_power 1024
- [ 0.083478] CPU3: Booted secondary processor
- [ 0.083478] CPU3: update cpu_power 1024
- [ 0.083478] Brought up 4 CPUs
- [ 0.090010] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.096475] devtmpfs: initialized
- [ 0.102546] atomic64 test passed
- [ 0.102546] pinctrl core: initialized pinctrl subsystem
- [ 0.105058] NET: Registered protocol family 16
- [ 0.110081] dump_class_init,844, success
- [ 0.112903] vdso: 2 pages (1 code, 1 data) at base ffffffc000c11000
- [ 0.115803] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.120970] software IO TLB [mem 0xbb800000-0xbbc00000] (4MB) mapped at [ffffffc07b800000-ffffffc07bbfffff]
- [ 0.130440] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.140165] pll_periph0-set_default_rate=600000000 success!
- [ 0.150021] pll_periph1-set_default_rate=600000000 success!
- [ 0.155487] pll_video1-set_default_rate=594000000 success!
- [ 0.160034] pll_de-set_default_rate=696000000 success!
- [ 0.165312] de-set_default_source=pll_de success!
- [ 0.169635] de-set_default_rate=696000000 success!
- [ 0.170625] clk sata not found in of_sunxi_periph_clk_setup
- [ 0.175464] clk sata_24m not found in of_sunxi_periph_clk_setup
- [ 0.180456] pciemaxi-set_default_rate=200000000 success!
- [ 0.185217] pcieaux-set_default_rate=1000000 success!
- [ 0.190052] hdmi-set_default_source=pll_video1 success!
- [ 0.195284] tcon_tv-set_default_source=pll_video1 success!
- [ 0.200161] hdmi_hdcp-set_default_source=pll_periph1 success!
- [ 0.210754] sun50iw6p1-r-pinctrl r_pio: initialized sunXi PIO driver
- [ 0.221812] sun50iw6p1-pinctrl pio: initialized sunXi PIO driver
- [ 0.225794] sunxi hwspinlock vbase:0xffffff800005e000
- [ 0.240191] [ARISC] :sunxi-arisc driver v1.60
- [ 0.240800] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
- [ 0.260130] bio: create slab <bio-0> at 0
- [ 0.260194] pwm module init!
- [ 0.270277] SCSI subsystem initialized
- [ 0.270277] usbcore: registered new interface driver usbfs
- [ 0.270277] usbcore: registered new interface driver hub
- [ 0.270277] usbcore: registered new device driver usb
- [ 0.270337] media: Linux media interface: v0.10
- [ 0.273305] Linux video capture interface: v2.00
- [ 0.280057] [axp806] chip id detect 0x60 !
- [ 0.332111] drm config service not available: FFFFFFFF
- [ 0.332111] irq = 89
- [ 0.332111] Attached to iommu domain
- [ 0.332111] Attached to iommu domain
- [ 0.332111] Attached to iommu domain
- [ 0.332111] Attached to iommu domain
- [ 0.332111] Attached to iommu domain
- [ 0.332709] Attached to iommu domain
- [ 0.336205] Attached to iommu domain
- [ 0.340024] Attached to iommu domain
- [ 0.343506] Attached to iommu domain
- [ 0.350068] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.350184] Bluetooth: Core ver 2.16
- [ 0.360014] NET: Registered protocol family 31
- [ 0.364285] Bluetooth: HCI device and connection manager initialized
- [ 0.370016] Bluetooth: HCI socket layer initialized
- [ 0.374776] Bluetooth: L2CAP socket layer initialized
- [ 0.379732] Bluetooth: SCO socket layer initialized
- [ 0.380158] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.390104] [DISP]disp_module_init
- [ 0.393009] [DISP] disp_boot_para_parse,line:685:of_property_read disp.init_disp fail
- [ 0.397377] [DISP] init_disp:0x0
- [ 0.400014] [DISP] boot_disp:0x0
- [ 0.404726] [DISP] fb_base:0x0
- [ 0.410229] [DISP] Fb_copy_boot_fb,line:1065:no boot_fb0
- [ 0.420265] [DISP]disp_module_init finish
- [ 0.422954] acx00_detect, l:382, twi_id:3, adapter->nr:3
- [ 0.422954] acx00_i2c_probe,l:264
- [ 0.423399] acx00_init_work,l:127
- [ 0.426880] __sid_efuse_key_is_readable()609 - The key oem write protect bit not burned!
- [ 0.441486] sunxi budget cooling probe start !
- [ 0.442022] CPU freq cooling register Success
- [ 0.446277] CPU hotplug cooling register Success
- [ 0.450052] CPU budget cooling register Success
- [ 0.460465] __sid_efuse_key_is_readable()609 - The key thermal_sensor write protect bit not burned!
- [ 0.470390] Switching to clocksource arch_sys_counter
- [ 0.484509] FS-Cache: Loaded
- [ 0.484921] CacheFiles: Loaded
- [ 0.494688] get det_vbus is fail, 84
- [ 0.495912] [ddrfreq] disabled, but continue to get freq!
- [ 0.496168] devfreq dramfreq: Couldn't update frequency transition information.
- [ 0.496259] sunxi_dramfreq_irq_mask_control: the key master doesn't exit
- [ 0.498751] NET: Registered protocol family 2
- [ 0.503602] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.510495] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.516990] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.523426] TCP: reno registered
- [ 0.526520] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.532592] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.539102] NET: Registered protocol family 1
- [ 0.543515] RPC: Registered named UNIX socket transport module.
- [ 0.549097] RPC: Registered udp transport module.
- [ 0.553876] RPC: Registered tcp transport module.
- [ 0.558472] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.565140] Unpacking initramfs...
- [ 0.570670] acx00_init_work,l:134
- [ 0.605500] Freeing initrd memory: 1064K (ffffffc076b71000 - ffffffc076c7b000)
- [ 0.606015] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
- [ 0.607502] lock super standby defaultly!
- [ 0.607550] lookup_scene_lock_name: new scene lock super_standby
- [ 0.607605] scene_lock_init name=super_standby
- [ 0.611353] scene_lock: super_standby, type 5, count 1
- [ 0.617066] audit: initializing netlink socket (disabled)
- [ 0.621864] type=2000 audit(0.620:1): initialized
- [ 0.635158] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.635927] FS-Cache: Netfs 'cifs' registered for caching
- [ 0.637421] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.641666] fuse init (API version 7.22)
- [ 0.646022] msgmni has been set to 3971
- [ 0.650378] io scheduler noop registered
- [ 0.652981] io scheduler deadline registered
- [ 0.657422] io scheduler cfq registered (default)
- [ 0.662605] [pm]aw_pm_init!
- [ 0.664792] np name = /soc@03000000/rtc@07000000.
- [ 0.669381] base = ffffff8001bba100, len = 8.
- [ 0.673834] pmu name: pmic0 .
- [ 0.676795] Warning: can not find np for pmic0.
- [ 0.681371] pmu name: pmic1 .
- [ 0.684279] Warning: can not find np for pmic1.
- [ 0.691989] add_sys_pwr_dm: get ldo name for id: vdd-cpus failed
- [ 0.694911] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
- [ 0.702138] add_sys_pwr_dm: axp80_cldo1 ldo already alwayson.
- [ 0.706755] add_sys_pwr_dm: get ldo name for id: vcc-ldoin failed
- [ 0.714086] add_sys_pwr_dm: get ldo name for id: vcc-pc failed
- [ 0.718797] after inited: sys_mask config = 0x4a15.
- [ 0.723880] Warning: can not find np for dynamic_standby_para.
- [ 0.729767] [pm]valid
- [ 0.731981] [pm]valid
- [ 0.734191] Notice: sun9i & sun8iw5 & sun50i not need support normal standby, change to super standby.
- [ 0.744267] sunxi_bootup_extend_probe: bootup extend state 1
- [ 0.749399] bootup extend probe ok
- [ 0.753235] gpio_pin_1(359) gpio_is_valid
- [ 0.756996] gpio_pin_2(355) gpio_is_valid
- [ 0.760978] gpio_pin_3(356) gpio_is_valid
- [ 0.764983] gpio name is PL7, ret = 0
- [ 0.768593] gpio name is PL3, ret = 0
- [ 0.772253] gpio name is PL4, ret = 0
- [ 0.775919] gpio_init finish with uesd
- [ 0.779856] Console: switching to colour frame buffer device 160x45
- [ 0.790745] sw_uart_probe()1448 - uart0 error to get bt property
- [ 0.791793] uart0: ttyS0 at MMIO 0x5000000 (irq = 32) is a SUNXI
- [ 0.797660] sw_console_setup()1271 - console setup baud 115200 parity n bits 8, flow n
- [ 0.805728] console [ttyS0] enabled, bootconsole disabled
- [ 0.805728] console [ttyS0] enabled, bootconsole disabled
- [ 0.834469] uart1: ttyS1 at MMIO 0x5000400 (irq = 33) is a SUNXI
- [ 0.847191] misc dump reg init
- [ 0.854040] loop: module loaded
- [ 0.857600] Get boot type cmd line fail
- [ 0.862430] sunxi-wlan wlan: wlan_busnum (1)
- [ 0.867223] sunxi-wlan wlan: wlan_usbnum (3)
- [ 0.872181] sunxi-wlan wlan: wlan_power_name (vcc-wifi)
- [ 0.878042] sunxi-wlan wlan: io_regulator_name (vcc-wifipower)
- [ 0.884821] sunxi-wlan wlan: wlan_regon gpio=387 mul-sel=1 pull=-1 drv_level=-1 data=0
- [ 0.894274] sunxi-wlan wlan: get gpio wlan_en failed
- [ 0.899847] sunxi-wlan wlan: wlan_hostwake gpio=384 mul-sel=0 pull=-1 drv_level=-1 data=0
- [ 0.909677] sunxi-wlan wlan: get gpio wlan_clk_gpio failed
- [ 0.915939] sunxi-wlan wlan: clk not config
- [ 0.927444] __sid_efuse_key_is_readable()609 - The key oem write protect bit not burned!
- [ 0.937893] tun: Universal TUN/TAP device driver, 1.6
- [ 0.943670] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.954364] gmac-power0: NULL
- [ 0.960670] gmac-power1: NULL
- [ 0.966793] gmac-power2: NULL
- [ 0.973650] PPP generic driver version 2.4.2
- [ 0.981537] PPP BSD Compression module registered
- [ 0.989563] PPP Deflate Compression module registered
- [ 0.998265] PPP MPPE Compression module registered
- [ 1.006526] NET: Registered protocol family 24
- [ 1.014451] PPTP driver version 0.8.5
- [ 1.021627] hso: drivers/net/usb/hso.c: Option Wireless
- [ 1.030514] usbcore: registered new interface driver hso
- [ 1.039440] usbcore: registered new interface driver asix
- [ 1.048487] usbcore: registered new interface driver ax88179_178a
- [ 1.058241] usbcore: registered new interface driver cdc_ether
- [ 1.067621] usbcore: registered new interface driver net1080
- [ 1.076735] usbcore: registered new interface driver cdc_subset
- [ 1.086105] usbcore: registered new interface driver zaurus
- [ 1.095066] usbcore: registered new interface driver cdc_ncm
- [ 1.104036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.114245] get ehci0-controller, regulator_io is no nocare
- [ 1.123287] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffffc000eb7c70, 0x:ffffff8001bcc000, irq_no:38
- [ 1.139911] sunxi-ehci 5101000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.153206] sunxi-ehci 5101000.ehci0-controller: new USB bus registered, assigned bus number 1
- [ 1.166395] sunxi-ehci 5101000.ehci0-controller: irq 56, io mem 0xffffffc0008b2d80
- [ 1.190028] sunxi-ehci 5101000.ehci0-controller: USB 0.0 started, EHCI 1.00
- [ 1.200988] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.211704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.222875] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.234324] usb usb1: Manufacturer: Linux 3.10.65 ehci_hcd
- [ 1.243509] usb usb1: SerialNumber: sunxi-ehci
- [ 1.280148] hub 1-0:1.0: USB hub found
- [ 1.287240] hub 1-0:1.0: 1 port detected
- [ 1.295021] get ehci3-controller, regulator_io is no nocare
- [ 1.304355] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffffc000eb8648, 0x:ffffff8001bd4000, irq_no:3c
- [ 1.321271] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.334827] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 2
- [ 1.348138] sunxi-ehci 5311000.ehci3-controller: irq 60, io mem 0xffffffc0008b2d80
- [ 1.380022] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00
- [ 1.391222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.402172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.413583] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.425335] usb usb2: Manufacturer: Linux 3.10.65 ehci_hcd
- [ 1.434786] usb usb2: SerialNumber: sunxi-ehci
- [ 1.470150] hub 2-0:1.0: USB hub found
- [ 1.477425] hub 2-0:1.0: 1 port detected
- [ 1.485509] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.495868] get ohci0-controller, regulator_io is no nocare
- [ 1.505505] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffffc000eb6f50
- [ 1.519446] sunxi-ohci 5101000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.532744] sunxi-ohci 5101000.ohci0-controller: new USB bus registered, assigned bus number 3
- [ 1.545972] sunxi-ohci 5101000.ohci0-controller: irq 57, io mem 0xffffffc000eb6f50
- [ 1.613999] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.625240] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.636918] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.648527] usb usb3: Manufacturer: Linux 3.10.65 ohci_hcd
- [ 1.658262] usb usb3: SerialNumber: sunxi-ohci
- [ 1.690141] hub 3-0:1.0: USB hub found
- [ 1.697847] hub 3-0:1.0: 1 port detected
- [ 1.706263] get ohci3-controller, regulator_io is no nocare
- [ 1.716301] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffffc000eb7928
- [ 1.730664] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.744432] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 4
- [ 1.758155] sunxi-ohci 5311000.ohci3-controller: irq 61, io mem 0xffffffc000eb7928
- [ 1.833998] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.845699] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.857712] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.869541] usb usb4: Manufacturer: Linux 3.10.65 ohci_hcd
- [ 1.879490] usb usb4: SerialNumber: sunxi-ohci
- [ 1.910141] hub 4-0:1.0: USB hub found
- [ 1.917970] hub 4-0:1.0: 1 port detected
- [ 1.926932] get xhci-controller, regulator_io is no nocare
- [ 1.937110] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.946977] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
- [ 1.959874] xhci-hcd xhci-hcd.0.auto: irq 58, io mem 0x05200000
- [ 1.970273] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.981651] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.993567] usb usb5: Product: xHCI Host Controller
- [ 2.002809] usb usb5: Manufacturer: Linux 3.10.65 xhci-hcd
- [ 2.012636] usb usb5: SerialNumber: xhci-hcd.0.auto
- [ 2.050149] hub 5-0:1.0: USB hub found
- [ 2.057737] hub 5-0:1.0: 1 port detected
- [ 2.065848] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 2.075523] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
- [ 2.087690] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.098862] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.110496] usb usb6: Product: xHCI Host Controller
- [ 2.119301] usb usb6: Manufacturer: Linux 3.10.65 xhci-hcd
- [ 2.129099] usb usb6: SerialNumber: xhci-hcd.0.auto
- [ 2.160182] hub 6-0:1.0: USB hub found
- [ 2.167761] hub 6-0:1.0: 1 port detected
- [ 2.176289] usbcore: registered new interface driver usb-storage
- [ 2.186621] usbcore: registered new interface driver ums-alauda
- [ 2.196728] usbcore: registered new interface driver ums-cypress
- [ 2.206818] usbcore: registered new interface driver ums-datafab
- [ 2.216849] usbcore: registered new interface driver ums_eneub6250
- [ 2.227025] usbcore: registered new interface driver ums-freecom
- [ 2.236927] usbcore: registered new interface driver ums-isd200
- [ 2.246673] usbcore: registered new interface driver ums-jumpshot
- [ 2.256560] usbcore: registered new interface driver ums-karma
- [ 2.266077] usbcore: registered new interface driver ums-onetouch
- [ 2.275908] usbcore: registered new interface driver ums-realtek
- [ 2.285565] usbcore: registered new interface driver ums-sddr09
- [ 2.295111] usbcore: registered new interface driver ums-sddr55
- [ 2.304597] usbcore: registered new interface driver ums-usbat
- [ 2.313985] usbcore: registered new interface driver usbserial
- [ 2.323154] usbcore: registered new interface driver option
- [ 2.331962] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 2.343013] mousedev: PS/2 mouse device common for all mice
- [ 2.351974] usbcore: registered new interface driver xpad
- [ 2.360613] usbcore: registered new interface driver usb_acecad
- [ 2.369766] usbcore: registered new interface driver aiptek
- [ 2.378472] usbcore: registered new interface driver gtco
- [ 2.386942] usbcore: registered new interface driver hanwang
- [ 2.395669] usbcore: registered new interface driver kbtab
- [ 2.404217] usbcore: registered new interface driver wacom
- [ 2.413608] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0
- [ 2.422732] sunxi-rtc rtc: RTC enabled
- [ 2.429579] i2c /dev entries driver
- [ 2.436030] IR NEC protocol handler initialized
- [ 2.443268] IR RC5(x) protocol handler initialized
- [ 2.450797] IR RC6 protocol handler initialized
- [ 2.457866] IR JVC protocol handler initialized
- [ 2.465125] IR Sony protocol handler initialized
- [ 2.472368] IR RC5 (streamzap) protocol handler initialized
- [ 2.480716] IR SANYO protocol handler initialized
- [ 2.487984] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.496792] sunxi cedar version 0.1
- [ 2.502976] VE: install start!!!
- [ 2.502976]
- [ 2.512340] cedar_ve: cedar-ve the get irq is 121
- [ 2.519907] VE: install end!!!
- [ 2.519907]
- [ 2.529100] google_vp9: sunxi google vp9 version 0.1
- [ 2.536707] google_vp9: [google vp9]: install start!!!
- [ 2.544537] google_vp9: google vp9: the get irq is 122
- [ 2.552546] google_vp9: [cedar]: install end!!!
- [ 2.560420] input: axp80-powerkey as /devices/soc/pmu0/axp80-powerkey/input/input0
- [ 2.588028] sunxi gpu cooling probe start !
- [ 2.594929] CPU gpu cooling register Success
- [ 2.602330] device-mapper: uevent: version 1.0.3
- [ 2.610063] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 2.622003] Bluetooth: HCI UART driver ver 2.2
- [ 2.629264] Bluetooth: HCI H4 protocol initialized
- [ 2.637186] Bluetooth: HCI Realtek H5 protocol initialized
- [ 2.645809] rtk_btcoex: rtk_uart_coex_init, version: 1.1
- [ 2.654284] rtk_btcoex: create workqueue
- [ 2.662657] [cpufreq] use dvfs_table_2
- [ 2.675591] cpuidle: using governor ladder
- [ 2.682170] cpuidle: using governor menu
- [ 2.689586] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v0.83 2017-08-17 16:22) Compiled in Jan 23 2018 at 18:12:21
- [ 2.704053] sunxi-mmc sdc2: regulator prop vmmc,str vcc-emmcv
- [ 2.712523] sunxi-mmc sdc2: regulator prop vqmmc,str vcc-emmcvq18
- [ 2.721339] sunxi-mmc sdc2: regulator prop vdmmc,str none
- [ 2.729282] sunxi-mmc sdc2: No vdmmc regulator found
- [ 2.737388] sunxi-mmc sdc2: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.770025] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.800040] sunxi-mmc sdc2: base:0xffffff8001ea2000 irq:69
- [ 2.801673] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.804065] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.812461] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.813317] sunxi-mmc sdc2: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
- [ 2.860255] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v0.83 2017-08-17 16:22) Compiled in Jan 23 2018 at 18:12:21
- [ 2.874941] sunxi-mmc sdc0: ***ctl-spec-caps*** 80
- [ 2.882612] sunxi-mmc sdc0: regulator prop vmmc,str vcc-sdcv
- [ 2.891252] sunxi-mmc sdc0: regulator prop vqmmc,str vcc-sdcvq33
- [ 2.900271] sunxi-mmc sdc0: regulator prop vdmmc,str vcc-sdcvd
- [ 2.909405] sunxi-mmc sdc0: no earse
- [ 2.915718] sunxi-mmc sdc0: Got CD GPIO #166.
- [ 2.922991] sunxi-mmc sdc0: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.950013] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.980118] sunxi-mmc sdc0: base:0xffffff8001eaa000 irq:67
- [ 2.981752] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.984144] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 2.989392] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
- [ 2.989431] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
- [ 2.991821] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
- [ 3.054653] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v0.83 2017-08-17 16:22) Compiled in Jan 23 2018 at 18:12:21
- [ 3.069443] sunxi-mmc sdc1: Can't get vmmc regulator string
- [ 3.074033] mmc1: host does not support reading read-only switch. assuming write-enable.
- [ 3.076937] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing SD-HS(SDR25) dt B
- [ 3.076977] sunxi-mmc sdc0: sdc set ios: clk 50000000Hz bm PP pm ON vdd 15 width 1 timing SD-HS(SDR25) dt B
- [ 3.077032] sunxi-mmc sdc0: sdc set ios: clk 50000000Hz bm PP pm ON vdd 15 width 4 timing SD-HS(SDR25) dt B
- [ 3.077050] mmc1: new high speed SDHC card at address aaaa
- [ 3.138172] sunxi-mmc sdc1: Can't get vqmmc regulator string
- [ 3.138185] mmcblk0: mmc1:aaaa SC32G 29.7 GiB
- [ 3.154421] sunxi-mmc sdc1: Can't get vdmmc regulator string
- [ 3.158079] mmcblk0: p1 p2
- [ 3.168730] get() with no identifier
- [ 3.175155] get() with no identifier
- [ 3.175158] get() with no identifier
- [ 3.175161] sunxi-mmc sdc1: No vmmc regulator found
- [ 3.175163] sunxi-mmc sdc1: No vqmmc regulator found
- [ 3.175166] sunxi-mmc sdc1: No vdmmc regulator found
- [ 3.211613] sunxi-mmc sdc1: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 3.224299] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
- [ 3.250014] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 3.280033] sunxi-mmc sdc1: base:0xffffff8001eba000 irq:68
- [ 3.281659] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 3.284045] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 3.292396] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 3.293245] sunxi-mmc sdc1: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
- [ 3.341481] [EMCE]:Unsupport Current Storage!
- [ 3.348543] sunxi_emce_probe()474emce hw init failed!
- [ 3.356678] emce: probe of emce failed with error -22
- [ 3.364974] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.377345] PT71600 Driver - version 2.0.0-Half-IMA!
- [ 3.385570] usbcore: registered new interface driver usbhid
- [ 3.394120] usbhid: USB HID core driver
- [ 3.401074] zram: Created 1 device(s) ...
- [ 3.408278] ashmem: initialized
- [ 3.414249] logger: created 256K log 'log_main'
- [ 3.422216] logger: created 256K log 'log_events'
- [ 3.429907] logger: created 256K log 'log_radio'
- [ 3.437449] logger: created 256K log 'log_system'
- [ 3.445770] usbcore: registered new interface driver snd-usb-audio
- [ 3.458627] sndahub sound.3: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok
- [ 3.470996] sndahub sound.3: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok
- [ 3.483246] sndahub sound.3: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok
- [ 3.496298] sndhdmi sndhdmi: sndhdmi <-> 5097000.ahub_daudio1 mapping ok
- [ 3.506975] u32 classifier
- [ 3.512319] Actions configured
- [ 3.518246] Netfilter messages via NETLINK v0.30.
- [ 3.525823] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.535167] ctnetlink v0.93: registering with nfnetlink.
- [ 3.543301] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.553322] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.562368] xt_time: kernel timezone is -0000
- [ 3.569320] ipip: IPv4 over IPv4 tunneling driver
- [ 3.577176] gre: GRE over IPv4 demultiplexor driver
- [ 3.584778] ip_gre: GRE over IPv4 tunneling driver
- [ 3.593018] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.601205] arp_tables: (C) 2002 David S. Miller
- [ 3.608409] TCP: bic registered
- [ 3.614189] TCP: cubic registered
- [ 3.620108] TCP: westwood registered
- [ 3.626155] TCP: htcp registered
- [ 3.632018] Initializing XFRM netlink socket
- [ 3.639471] NET: Registered protocol family 10
- [ 3.647255] mip6: Mobile IPv6
- [ 3.652726] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.661076] sit: IPv6 over IPv4 tunneling driver
- [ 3.668792] NET: Registered protocol family 17
- [ 3.675830] NET: Registered protocol family 15
- [ 3.682946] Bluetooth: RFCOMM TTY layer initialized
- [ 3.690496] Bluetooth: RFCOMM socket layer initialized
- [ 3.698158] Bluetooth: RFCOMM ver 1.11
- [ 3.704489] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 3.712414] Bluetooth: BNEP filters: protocol multicast
- [ 3.720230] Bluetooth: BNEP socket layer initialized
- [ 3.727603] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.736297] Bluetooth: HIDP socket layer initialized
- [ 3.744137] Registering SWP/SWPB emulation handler
- [ 3.752345] HDMI 2.0 driver init start!
- [ 3.758936] [DISP] boot_disp:0x0
- [ 3.764464] boot_hdmi=false
- [ 3.769414] hdmi reg base:0xffffffc042680000 esm_hpi_base:0xffffffc042688000
- [ 3.781151] HDMI2.0 module init end
- [ 3.787410] [DISP] boot_disp:0x0
- [ 4.390026] [HDMI receive params]: tv mode: 0xa format:0x1 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8
- [ 5.400214] [HDMI2.0]CEA VIC=16:
- [ 5.403698] 1920x1080p@60 Hz
- [ 5.409059] 16:9, 8-bpp
- [ 5.414176] YCbCr-444
- [ 5.421134] BT709
- [ 5.425250] eotf:SDR_LUMINANCE_RANGE
- [ 5.543689] [DISP] disp_device_attached_and_enable,line:192:attched ok, mgr0<-->dev0
- [ 5.554555] [DISP] disp_device_attached_and_enable,line:205:type:4,mode:10,fmt:yuv444,bits:8bits,eotf:4,cs:257 dvi_hdmi:2, range:2 scan:0 ratio:8
- [ 5.571870] __sid_efuse_key_is_readable()609 - The key oem write protect bit not burned!
- [ 5.601857] usb_serial_number:20080411
- [ 5.608576] file system registered
- [ 5.615479] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 5.625429] android_usb gadget: Number of LUNs=3
- [ 5.632814] lun0: LUN: removable file: (no medium)
- [ 5.640491] lun1: LUN: removable file: (no medium)
- [ 5.648003] lun2: LUN: removable file: (no medium)
- [ 5.656078] android_usb gadget: android_usb ready
- [ 5.663564] sunxi-rtc rtc: setting system clock to 2018-01-01 00:00:21 UTC (1514764821)
- [ 5.678326] snddaudio snddaudio2: codec: snd-soc-dummy, codec_dai: snd-soc-dummy-dai.
- [ 5.689691] snddaudio snddaudio2: snd-soc-dummy-dai <-> 5097000.ahub_daudio2 mapping ok
- [ 5.701748] snddaudio snddaudio3: codec: acx00-codec, codec_dai: acx00-dai.
- [ 5.767155] snddaudio snddaudio3: acx00-dai <-> 5097000.ahub_daudio3 mapping ok
- [ 5.778695] ALSA device list:
- [ 5.784387] #0: sndahub
- [ 5.789542] #1: sndhdmi
- [ 5.794829] #2: snddaudio2
- [ 5.800309] #3: sndacx00-codec
- [ 5.806314] Freeing unused kernel memory: 568K (ffffffc000b7c000 - ffffffc000c0a000)
- Kernel params: console=tty0 console=ttyS0,115200n8 no_console_suspend earlyprintk=sunxi-uart,0x05000000 mac_addr=72:D6:05:4F:B9:3B root=/dev/mmcblk0p2 ro rootwait
- Waiting for root system /dev/mmcblk0p2, countdown : 5
- Rootfs: /dev/mmcblk0p2
- [ 5.862055] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
- [ 5.877632] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- [ 5.916173] EXT4-fs (mmcblk0p2): recovery complete
- [ 5.924763] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.230608] systemd[1]: Failed to insert module 'autofs4': No such file or directory
- [ 6.266526] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 6.292326] systemd[1]: Detected architecture arm64.
- Welcome to [1mUbuntu 16.04.1 LTS[0m!
- [ 6.322735] systemd[1]: Set hostname to <OrangePi>.
- [ 6.576844] systemd[1]: unhandled input address range fault (11) at 0xfefffffffffff8, esr 0x92000004
- [ 6.590095] pgd = ffffffc076b35000
- [ 6.596602] [fefffffffffff8] *pgd=00000000b6bba003, *pmd=0000000000000000
- [ 6.607113]
- [ 6.611688] CPU: 0 PID: 1 Comm: systemd Not tainted 3.10.65 #35
- [ 6.621225] task: ffffffc07c8e0000 ti: ffffffc07c8e8000 task.ti: ffffffc07c8e8000
- [ 6.632516] PC is at 0x7faa9799a8
- [ 6.638939] LR is at 0x557a8206a0
- [ 6.645469] pc : [<0000007faa9799a8>] lr : [<000000557a8206a0>] pstate: 60000000
- [ 6.656555] sp : 0000007ff3c06c30
- [ 6.663083] x29: 0000007ff3c06c30 x28: 0000000000000000
- [ 6.671888] x27: 000000557a8fdeb8 x26: 000000557a9135a0
- [ 6.680700] x25: 000000557a956000 x24: 000000557a956000
- [ 6.689360] x23: 000000557a936000 x22: 000000000000000b
- [ 6.698160] x21: 000000557a936ca8 x20: 000000557a9706f0
- [ 6.706833] x19: 000000557a9706f0 x18: 000000557a8f8000
- [ 6.715390] x17: 0000007faa979988 x16: 000000557a956488
- [ 6.723929] x15: 003b9aca00000000 x14: 0009bf8ea3000000
- [ 6.732476] x13: ffffffffa5b685f0 x12: 0000000000000018
- [ 6.740955] x11: 0000000000000000 x10: 0101010101010101
- [ 6.749279] x9 : 000000557a965680 x8 : 000000557a9725bc
- [ 6.757807] x7 : ffffffffffffffff x6 : 000000557a933fa0
- [ 6.766285] x5 : 000000557a933fa0 x4 : 00000000fffffffe
- [ 6.774802] x3 : 0000000000000000 x2 : 0000000000000000
- [ 6.783326] x1 : 00fefffffffffff0 x0 : 00ff000000000000
- [ 6.791810]
- [ 6.804429] systemd[1]: Caught <SEGV>, dumped core as pid 1245.
- [ 6.813620] systemd[1]: Freezing execution.
Add Comment
Please, Sign In to add comment