API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 4th, 2019
446
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 53.40 KB | None | 0 0
raw download clone embed print report
  1. @▒?▒▒▒▒|▒c▒~C▒@▒▒▒▒▒▒<G12A:BL:0253b8:61aa2d;FEAT:E0F83180:2000;POC:F;RCY:0;EMMC:0;READ:0;0.0
  2. l2_stage_init 0x01
  3. bl2_stage_init 0x81
  4. hw id: 0x0001 - pwm id 0x00
  5. bl2_stage_init 0xc0
  6. bl2_stage_init 0x02
  7.  
  8. L0:00000000
  9. L1:00000703
  10. L2:00008067
  11. L3:04000000
  12. S1:00000000
  13. B2:00002000
  14. B1:e0f83180
  15.  
  16. TE: 543762
  17.  
  18. BL2 Built : 20:29:41, Jun 18 2019. g12a ga659aac - luan.yuan@droid15-sz
  19.  
  20. Board ID = 1
  21. Set cpu clk to 24M
  22. Set clk81 to 24M
  23. CPU clk: 1200 MHz
  24. Set clk81 to 166.6M
  25. eMMC boot @ 0
  26. sw8 s
  27. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:37
  28. board id: 1
  29. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  30. fw parse done
  31. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  32. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  33. PIEI prepare done
  34. fastboot data load
  35. 00000000
  36. emmc switch 1 ok
  37. ddr saved addr:00016000
  38. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  39. 00000000
  40. emmc switch 0 ok
  41. fastboot data verify
  42. verify result: 255
  43. Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
  44. DDR4 probe
  45. ddr clk to 1200MHz
  46. Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  47.  
  48. dmc_version 0000
  49. Check phy result
  50. INFO : End of initialization
  51. INFO : End of read enable training
  52. INFO : End of fine write leveling
  53. INFO : ERROR : Training has failed!
  54. 1D training failed
  55. Cfg max: 5, cur: 2. Board id: 255. Force loop cfg
  56. DDR3 probe
  57. ddr clk to 912MHz
  58. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  59.  
  60. dmc_version 0000
  61. Check phy result
  62. INFO : End of initialization
  63. INFO : ERROR : Training has failed!
  64. 1D training failed
  65. Cfg max: 5, cur: 3. Board id: 255. Force loop cfg
  66. LPDDR4 probe
  67. ddr clk to 1392MHz
  68. Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  69.  
  70. dmc_version 0000
  71. Check phy result
  72. INFO : End of CA training
  73. INFO : End of initialization
  74. INFO : Training has run successfully!
  75. Check phy result
  76. INFO : End of initialization
  77. INFO : End of read enable training
  78. INFO : End of fine write leveling
  79. INFO : End of Write leveling coarse delay
  80. INFO : Training has run successfully!
  81. Check phy result
  82. INFO : End of initialization
  83. INFO : End of read dq deskew training
  84. INFO : End of MPR read delay center optimization
  85. INFO : End of write delay center optimization
  86. INFO : End of read delay center optimization
  87. INFO : End of max read latency training
  88. INFO : Training has run successfully!
  89. 1D training succeed
  90. Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
  91. Check phy result
  92. INFO : End of initialization
  93. INFO : End of 2D read delay Voltage center optimization
  94. INFO : End of 2D read delay Voltage center optimization
  95. INFO : End of 2D write delay Voltage center optimization
  96. INFO : End of 2D write delay Voltage center optimization
  97. INFO : Training has run successfully!
  98.  
  99. channel==0
  100. RxClkDly_Margin_A0==100 ps 9
  101. TxDqDly_Margin_A0==100 ps 9
  102. RxClkDly_Margin_A1==112 ps 10
  103. TxDqDly_Margin_A1==112 ps 10
  104. TrainedVREFDQ_A0==77
  105. TrainedVREFDQ_A1==78
  106. VrefDac_Margin_A0==23
  107. DeviceVref_Margin_A0==37
  108. VrefDac_Margin_A1==24
  109. DeviceVref_Margin_A1==36
  110.  
  111.  
  112. channel==1
  113. RxClkDly_Margin_A0==100 ps 9
  114. TxDqDly_Margin_A0==112 ps 10
  115. RxClkDly_Margin_A1==78 ps 7
  116. TxDqDly_Margin_A1==123 ps 11
  117. TrainedVREFDQ_A0==76
  118. TrainedVREFDQ_A1==78
  119. VrefDac_Margin_A0==21
  120. DeviceVref_Margin_A0==38
  121. VrefDac_Margin_A1==22
  122. DeviceVref_Margin_A1==36
  123.  
  124. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  125.  
  126. soc_vref_reg_value 0x 00000018 00000018 00000015 00000017 00000017 00000019 00000014 00000015 00000017 00000016 00000015 00000016 00000016 00000014 00000016 00000016 00000014 00000012 00000014 00000015 00000016 00000015 00000014 00000016 00000016 00000017 00000015 00000014 00000015 00000013 00000015 00000015 dram_vref_reg_value 0x 0000005f
  127. 2D training succeed
  128. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
  129. auto size-- 65535DDR cs0 size: 2048MB
  130. DDR cs1 size: 2048MB
  131. DMC_DDR_CTRL: 00e00024DDR size: 3928MB
  132. cs0 DataBus test pass
  133. cs1 DataBus test pass
  134. cs0 AddrBus test pass
  135. cs1 AddrBus test pass
  136.  
  137. non-sec scramble use zero key
  138. ddr scramble enabled
  139.  
  140. 100bdlr_step_size ps== 544
  141. result report
  142. boot times 0Enable ddr reg access
  143. 00000000
  144. emmc switch 3 ok
  145. BL2: rpmb counter: 0x00000068
  146. 00000000
  147. emmc switch 0 ok
  148. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  149. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000c8000, part: 0
  150. bl2z: ptr: 05129330, size: 00001e40
  151. 0.0;M3 CHK:0;cm4_sp_mode 0
  152. MVN_1=0x00000000
  153. MVN_2=0x00000000
  154. [Image: g12a_v1.1.3389-92241b5 2019-07-02 17:22:49 luan.yuan@droid15-sz]
  155. OPS=0x40
  156. ring efuse init
  157. 28 0b 40 00 01 21 17 00 00 09 32 37 4d 50 4b 50
  158. [0.017150 Inits done]
  159. secure task start!
  160. high task start!
  161. low task start!
  162. run into bl31
  163. NOTICE: BL31: v1.3(release):4fc40b1
  164. NOTICE: BL31: Built : 15:57:33, May 22 2019
  165. NOTICE: BL31: G12A normal boot!
  166. NOTICE: BL31: BL33 decompress pass
  167. ERROR: Error initializing runtime service opteed_fast
  168.  
  169.  
  170. U-Boot 2015.01-g65210bcf24-dirty (Sep 29 2019 - 12:47:54)
  171.  
  172. DRAM: 3.8 GiB
  173. Relocation Offset is: d6e5f000
  174. spi_post_bind(spifc): req_seq = 0
  175. register usb cfg[0][1] = 00000000d7f3f210
  176. NAND: get_sys_clk_rate_mtd() 290, clock setting 200!
  177. NAND device id: 0 ff ff ff ff ff
  178. No NAND device found!!!
  179. nand init failed: -6
  180. get_sys_clk_rate_mtd() 290, clock setting 200!
  181. NAND device id: 0 ff ff ff ff ff
  182. No NAND device found!!!
  183. nand init failed: -6
  184. MMC: aml_priv->desc_buf = 0x00000000d3e4fa70
  185. aml_priv->desc_buf = 0x00000000d3e51db0
  186. SDIO Port B: 0, SDIO Port C: 1
  187. co-phase 0x3, tx-dly 0, clock 400000
  188. co-phase 0x3, tx-dly 0, clock 400000
  189. co-phase 0x3, tx-dly 0, clock 400000
  190. emmc/sd response timeout, cmd8, status=0x1ff2800
  191. emmc/sd response timeout, cmd55, status=0x1ff2800
  192. co-phase 0x3, tx-dly 0, clock 400000
  193. co-phase 0x3, tx-dly 0, clock 40000000
  194. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x22000
  195. [mmc_startup] mmc refix success
  196. init_part() 297: PART_TYPE_AML
  197. [mmc_init] mmc init success
  198. Amlogic multi-dtb tool
  199. GZIP format, decompress...
  200. Multi dtb detected
  201. Multi dtb tool version: v2 .
  202. Support 2 dtbs.
  203. aml_dt soc: g12a platform: u211 variant: 4g
  204. dtb 0 soc: g12a plat: u211 vari: 2g
  205. dtb 1 soc: g12a plat: u211 vari: 4g
  206. Find match dtb: 1
  207. start dts,buffer=00000000d3e54620,dt_addr=00000000d3e54620
  208. get_partition_from_dts() 91: ret 0
  209. Amlogic multi-dtb tool
  210. Single dtb detected
  211. parts: 17
  212. 00: logo 0000000000800000 1
  213. 01: recovery 0000000001800000 1
  214. 02: misc 0000000000800000 1
  215. 03: dtbo 0000000000800000 1
  216. 04: cri_data 0000000000800000 2
  217. 05: param 0000000001000000 2
  218. 06: boot 0000000001000000 1
  219. set has_boot_slot = 0
  220. 07: rsv 0000000001000000 1
  221. 08: metadata 0000000001000000 1
  222. 09: vbmeta 0000000000200000 1
  223. 10: tee 0000000002000000 1
  224. 11: vendor 0000000020000000 1
  225. 12: odm 0000000008000000 1
  226. 13: system 0000000074000000 1
  227. 14: product 0000000008000000 1
  228. 15: cache 0000000046000000 2
  229. 16: data ffffffffffffffff 4
  230. init_part() 297: PART_TYPE_AML
  231. eMMC/TSD partition table have been checked OK!
  232. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  233. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  234. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  235. mmc env offset: 0x4d400000
  236. In: serial
  237. Out: serial
  238. Err: serial
  239. reboot_mode=cold_boot
  240. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  241. _verify_dtb_checksum()-3406: calc 641449d8, store 641449d8
  242. _verify_dtb_checksum()-3406: calc 641449d8, store 641449d8
  243. dtb_read()-3623: total valid 2
  244. update_old_dtb()-3604: do nothing
  245. Amlogic multi-dtb tool
  246. GZIP format, decompress...
  247. Multi dtb detected
  248. Multi dtb tool version: v2 .
  249. Support 2 dtbs.
  250. aml_dt soc: g12a platform: u211 variant: 4g
  251. dtb 0 soc: g12a plat: u211 vari: 2g
  252. dtb 1 soc: g12a plat: u211 vari: 4g
  253. Find match dtb: 1
  254. amlkey_init() enter!
  255. [EFUSE_MSG]keynum is 4
  256. vpu: clk_level in dts: 7
  257. vpu: vpu_power_on
  258. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  259. vpu: vpu_module_init_config
  260. vpp: vpp_init
  261. vpp: vpp osd2 matrix rgb2yuv..............
  262. cvbs: cpuid:0x28
  263. aml_config_dtb 633
  264. aml_config_dtb 663
  265. co_phase = <0x00000003>
  266. caps2 = "MMC_CAP2_HS200"
  267. f_max = "
  268. ▒▒"
  269. status = "disabled"
  270. status = "okay"
  271. Net: dwmac.ff3f0000amlkey_init() enter!
  272. amlkey_init() 71: already init!
  273. [EFUSE_MSG]keynum is 4
  274. MACADDR:02:00:00:17:21:01(from chipid)
  275.  
  276. CONFIG_AVB2: null
  277. Start read misc partition datas!
  278. info->magic =
  279. info->version_major = 0
  280. info->version_minor = 0
  281. info->slots[0].priority = 0
  282. info->slots[0].tries_remaining = 0
  283. info->slots[0].successful_boot = 0
  284. info->slots[1].priority = 0
  285. info->slots[1].tries_remaining = 0
  286. info->slots[1].successful_boot = 0
  287. info->crc32 = 0
  288. Magic is incorrect.
  289. boot-info is invalid. Resetting.
  290. save boot-info
  291. info->magic =
  292. info->version_major = 1
  293. info->version_minor = 0
  294. info->slots[0].priority = 15
  295. info->slots[0].tries_remaining = 7
  296. info->slots[0].successful_boot = 0
  297. info->slots[1].priority = 14
  298. info->slots[1].tries_remaining = 7
  299. info->slots[1].successful_boot = 0
  300. info->crc32 = -1075449479
  301. active slot = 0
  302. wipe_data=successful
  303. wipe_cache=successful
  304. upgrade_step=2
  305. reboot_mode:::: cold_boot
  306. amlkey_init() enter!
  307. amlkey_init() 71: already init!
  308. [EFUSE_MSG]keynum is 4
  309. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  310. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  311. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  312. hpd_state=0
  313. edid preferred_mode is <NULL>[0]
  314. hdr mode is 0
  315. dv mode is ver:0 len: 0
  316. hdr10+ mode is 0
  317. [OSD]load fb addr from dts:/meson-fb
  318. [OSD]set initrd_high: 0x7f800000
  319. [OSD]fb_addr for logo: 0x7f800000
  320. [OSD]load fb addr from dts:/meson-fb
  321. [OSD]fb_addr for logo: 0x7f800000
  322. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  323. [CANVAS]canvas init
  324. [CANVAS]addr=0x7f800000 width=3840, height=2160
  325. [OSD]osd_hw.free_dst_data: 0,719,0,575
  326. [OSD]osd1_update_disp_freescale_enable
  327. vpp: vpp_matrix_update: 2
  328. cvbs performance type = 9, table = 0
  329. cvbs_config_hdmipll_g12a
  330. cvbs_set_vid2_clk
  331. vpp: sdr_mode = 2
  332. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  333. amlkey_init() enter!
  334. amlkey_init() 71: already init!
  335. [EFUSE_MSG]keynum is 4
  336. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  337. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  338. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  339. gpio: pin GPIOAO_3 (gpio 3) value is 1
  340. Command: bcb uboot-command
  341. Start read misc partition datas!
  342. BCB hasn't any datas,exit!
  343. amlkey_init() enter!
  344. amlkey_init() 71: already init!
  345. [EFUSE_MSG]keynum is 4
  346. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  347. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  348. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  349. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  350. pll tsensor avg: 0x1eac, u_efuse: 0x800b
  351. temp1: 28
  352. ddr tsensor avg: 0x1ea4, u_efuse: 0x1f
  353. temp2: 28
  354. device cool done
  355. CONFIG_SYSTEM_AS_ROOT: systemroot
  356. system_mode: 1
  357. Start read misc partition datas!
  358. info->magic =
  359. info->version_major = 1
  360. info->version_minor = 0
  361. info->slots[0].priority = 15
  362. info->slots[0].tries_remaining = 7
  363. info->slots[0].successful_boot = 0
  364. info->slots[1].priority = 14
  365. info->slots[1].tries_remaining = 7
  366. info->slots[1].successful_boot = 0
  367. info->crc32 = -1075449479
  368. active slot = 0
  369. CONFIG_AVB2: null
  370. active_slot: normal
  371. avb2: 0
  372. ee_gate_off ...
  373. avb2: 0
  374. ## Booting Android Image at 0x01080000 ...
  375. Kernel command line: androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
  376. Start read misc partition datas!
  377. info->magic =
  378. info->version_major = 1
  379. info->version_minor = 0
  380. info->slots[0].priority = 15
  381. info->slots[0].tries_remaining = 7
  382. info->slots[0].successful_boot = 0
  383. info->slots[1].priority = 14
  384. info->slots[1].tries_remaining = 7
  385. info->slots[1].successful_boot = 0
  386. info->crc32 = -1075449479
  387. active slot = 0
  388. active_slot is normal
  389. load dtb from 0x1000000 ......
  390. Amlogic multi-dtb tool
  391. Single dtb detected
  392. find 1 dtbos
  393. dtbos to be applied: 0
  394. Apply dtbo 0
  395. Loading Kernel Image(COMP_NONE) ... OK
  396. kernel loaded at 0x01080000, end = 0x01996480
  397. Loading Device Tree to 0000000009fe4000, end 0000000009fffd37 ... OK
  398.  
  399. Starting kernel ...
  400.  
  401. uboot time: 4011371 us
  402. [ 0.000000@0] Booting Linux on physical CPU 0x0
  403. [ 0.000000@0] Linux version 4.9.113-gdc6cebb992c4-dirty (superceleron@superserver) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Sun Sep 29 13:16:04 WEST 2019
  404. [ 0.000000@0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  405. [ 0.000000@0] CPU: div instructions available: patching division code
  406. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  407. [ 0.000000@0] OF: fdt:Machine model: Amlogic
  408. [ 0.000000@0] earlycon: aml-uart0 at MMIO 0xff803000 (options '')
  409. [ 0.000000@0] bootconsole [aml-uart0] enabled
  410. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 4 MiB
  411. [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
  412. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
  413. [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
  414. [ 0.000000@0] Reserved memory: created CMA memory pool at 0xe8800000, size 128 MiB
  415. [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
  416. [ 0.000000@0] Reserved memory: created CMA memory pool at 0xe6000000, size 40 MiB
  417. [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
  418. [ 0.000000@0] Reserved memory: regions without no-map are not yet supported
  419. [ 0.000000@0] Reserved memory: created CMA memory pool at 0xd2c00000, size 308 MiB
  420. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  421. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  422. [ 0.000000@0] Reserved memory: created CMA memory pool at 0xcec00000, size 64 MiB
  423. [ 0.000000@0] OF: reserved mem: initialized node linux,vdin0_cma, compatible id shared-dma-pool
  424. [ 0.000000@0] Reserved memory: created CMA memory pool at 0xcac00000, size 64 MiB
  425. [ 0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
  426. [ 0.000000@0] cma: Reserved 8 MiB at 0xca400000
  427. [ 0.000000@0] Memory policy: Data cache writealloc
  428. [ 0.000000@0] psci: probing for conduit method from DT.
  429. [ 0.000000@0] psci: PSCIv1.0 detected in firmware.
  430. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  431. [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
  432. [ 0.000000@0] psci: SMC Calling Convention v1.1
  433. [ 0.000000@0] percpu: Embedded 15 pages/cpu @dd971000 s32140 r8192 d21108 u61440
  434. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 984080
  435. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 androidboot.selinux=permissive androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 ro rootwait skip_initramfs androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
  436. [ 0.000000@0] fb: osd0
  437. [ 0.000000@0] fb: loaded
  438. [ 0.000000@0] fb: 0x3d800000
  439. [ 0.000000@0] vout: 576cvbs
  440. [ 0.000000@0] vout: enable: 1
  441. [ 0.000000@0] lcd: panel_type: lcd_1
  442. [ 0.000000@0] vout: get hdmimode: 1080p60hz
  443. [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1[ 0.000000@0] vout: get cvbsmode: 576cvbs
  444. [ 0.000000@0] vpp_axis_reverse: bootargs is 0
  445. [ 0.000000@0] phlock_phase_config: bootargs is 0.
  446. [ 0.000000@0] jtag: jtag select disable
  447. [ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
  448. [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  449. [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  450. [ 0.000000@0] Memory: 3245484K/3940352K available (13312K kernel code, 1249K rwdata, 4780K rodata, 1024K init, 1338K bss, 55892K reserved, 638976K cma-reserved, 2789376K highmem)
  451. [ 0.000000@0] Virtual kernel memory layout:
  452. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  453. [ 0.000000@0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  454. [ 0.000000@0] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  455. [ 0.000000@0] lowmem : 0xc0000000 - 0xdf800000 ( 504 MB)
  456. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  457. [ 0.000000@0] modules : 0xbc000000 - 0xbfe00000 ( 62 MB)
  458. [ 0.000000@0] .text : 0xc0108000 - 0xc0f00000 (14304 kB)
  459. [ 0.000000@0] .init : 0xc1500000 - 0xc1600000 (1024 kB)
  460. [ 0.000000@0] .data : 0xc1600000 - 0xc1738438 (1250 kB)
  461. [ 0.000000@0] .bss : 0xc173a000 - 0xc1888bc4 (1339 kB)
  462. [ 0.000000@0] zone:Normal, spaned pages:129024, total:129024
  463. [ 0.000000@0] zone:HighMem, spaned pages:856064, total:985088
  464. [ 0.000000@0] page_trace_pre_work, trace buffer:dd400000, size:3c2000, used:dd7c2000, end:dd800000
  465. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  466. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  467. [ 0.000000@0] Build-time adjustment of leaf fanout to 32.
  468. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  469. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
  470. [ 0.000000@0] NR_IRQS:16 nr_irqs:16 16
  471. [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  472. [ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
  473. [ 0.000000@0] Meson chip version = RevB (28:B - 40:0)
  474. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  475. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  476. [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  477. [ 0.000000@0] meson_g12a_media_init: register meson media clk
  478. [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  479. [ 0.000000@0] meson_g12a_misc_init: done.
  480. [ 0.000000@0] g12a_clkc_init initialization complete
  481. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
  482. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  483. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  484. [ 0.008224@0] Switching to timer-based delay loop, resolution 41ns
  485. [ 0.014461@0] meson_bc_timer: mclk->mux_reg =e000c190,mclk->reg =e000e194
  486. [ 0.021925@0] Console: colour dummy device 80x30
  487. [ 0.025922@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  488. [ 0.036397@0] pid_max: default: 32768 minimum: 301
  489. [ 0.041274@0] thread_stack_cache_init, vmap:dd020c80, bitmap:dd024400, cache page:ca000
  490. [ 0.049274@0] thread_stack_cache_init, allocation vm area:dd023080, addr:bc000000, size:3001000
  491. [ 0.058056@0] Security Framework initialized
  492. [ 0.062309@0] SELinux: Initializing.
  493. [ 0.066033@0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  494. [ 0.072815@0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  495. [ 0.080688@0] CPU: Testing write buffer coherency: ok
  496. [ 0.085135@0] ftrace: allocating 43294 entries in 127 pages
  497. [ 0.163148@0] sched-energy: CPU device node has no sched-energy-costs
  498. [ 0.163956@0] CPU0: update cpu_capacity 1024
  499. [ 0.168275@0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  500. [ 0.174135@0] Setting up static identity map for 0x200000 - 0x200058
  501. [ 0.225975@0] secmon: can't fine clear_range
  502. [ 0.273219@1] CPU1: update cpu_capacity 1024
  503. [ 0.273224@1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  504. [ 0.305278@2] CPU2: update cpu_capacity 1024
  505. [ 0.305282@2] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  506. [ 0.337377@3] CPU3: update cpu_capacity 1024
  507. [ 0.337381@3] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  508. [ 0.337457@0] Brought up 4 CPUs
  509. [ 0.365390@0] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  510. [ 0.371873@0] CPU: All CPU(s) started in SVC mode.
  511. [ 0.377552@1] addr:bc045cce is in kernel, size fix 4096->10, data:mode=0755
  512. [ 0.383849@0] devtmpfs: initialized
  513. [ 0.413261@0] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  514. [ 0.415799@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  515. [ 0.425468@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  516. [ 0.431994@0] pinctrl core: initialized pinctrl subsystem
  517. [ 0.438306@0] NET: Registered protocol family 16
  518. [ 0.444874@0] DMA: preallocated 256 KiB pool for atomic coherent allocations
  519. [ 0.448995@0] schedtune: init normalization constants...
  520. [ 0.454333@0] schedtune: no energy model data
  521. [ 0.458700@0] schedtune: disabled!
  522. [ 0.482765@0] cpuidle: using governor menu
  523. [ 0.482862@0] register canvas platform driver
  524. [ 0.485619@0] register rdma platform driver
  525. [ 0.489836@0] aml_vdac_init: module init
  526. [ 0.496386@0] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  527. [ 0.501961@0] hw-breakpoint: maximum watchpoint size is 8 bytes.
  528. [ 0.508260@0] clkmsr: clkmsr: driver init
  529. [ 0.512021@0] codec_mm_module_init
  530. [ 0.515447@0] media_configs_system_init
  531. [ 0.519744@0] pstore: using zlib compression
  532. [ 0.524088@0] console [pstore-1] enabled
  533. [ 0.527517@0] pstore: Registered ramoops as persistent store backend
  534. [ 0.533896@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  535. [ 0.539588@0] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000[ 0.547710@0] aml_iomap: amlogic iomap probe done
  536. [ 0.551082@0] vpu: driver version: v20190314(7-g12a)
  537. [ 0.555514@0] vpu: load vpu_clk: 666666667Hz(7)
  538. [ 0.560239@0] vpu: clktree_init
  539. [ 0.563249@0] vpu: vpu_probe OK
  540. [ 0.570734@0] clkmsr: msr_clk_reg0=e01bc004,msr_clk_reg2=e01be00c
  541. [ 0.572474@0] clkmsr: msr_ring_reg0=e01c05fc
  542. [ 0.582056@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
  543. [ 0.583615@0] aml_vdac_probe: ok
  544. [ 0.586820@0] canvas_probe reg=ff638000,size=2000
  545. [ 0.591404@0] canvas maped reg_base =e01c2000
  546. [ 0.604402@0] rdma_probe,cpu_type:1, ver:0, len:8
  547. [ 0.604625@0] rdma_register, rdma_table_addr e01e5000 rdma_table_addr_phy ca440000 reg_buf dc800000
  548. [ 0.612588@0] rdma_register success, handle 1 table_size 32768
  549. [ 0.618437@0] set_rdma_handle video rdma handle = 1.
  550. [ 0.624578@0] aml_snd_reg_map[0], reg:ff640000, size:2000
  551. [ 0.628868@0] aml_snd_reg_map[1], reg:ff642000, size:2000
  552. [ 0.634290@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
  553. [ 0.639708@0] aml_snd_reg_map[3], reg:ff642800, size:1800
  554. [ 0.645135@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
  555. [ 0.650547@0] amlogic auge_snd_iomap probe done
  556. [ 0.657289@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12a-cvbsout
  557. [ 0.661773@0] cvbs_out: clk path:0
  558. [ 0.665146@0] cvbs_out: error: failed to get vdac_config
  559. [ 0.670637@0] vout: vout1: register server: cvbs_vout_server
  560. [ 0.676188@0] cvbs_out: register cvbs module server ok
  561. [ 0.681348@0] vout: vout2: register server: cvbs_vout2_server
  562. [ 0.687124@0] cvbs_out: register cvbs module vout2 server ok
  563. [ 0.692812@0] cvbs_out: chrdev devno 264241152 for disp
  564. [ 0.698265@0] cvbs_out: create cdev cvbs
  565. [ 0.701984@0] cvbs_out: cvbsout_probe OK
  566. [ 0.706572@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  567. [ 0.713545@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  568. [ 0.720995@0] codec_mm_probe ok
  569. [ 0.983365@0] vgaarb: loaded
  570. [ 0.983701@0] SCSI subsystem initialized
  571. [ 0.984798@0] usbcore: registered new interface driver usbfs
  572. [ 0.990309@0] usbcore: registered new interface driver hub
  573. [ 0.995830@0] usbcore: registered new device driver usb
  574. [ 1.001100@0] Linux video capture interface: v2.00
  575. [ 1.005902@0] pps_core: LinuxPPS API ver. 1 registered
  576. [ 1.010965@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  577. [ 1.020345@0] PTP clock support registered
  578. [ 1.025114@0] secmon: reserve_mem_size:0x300000
  579. [ 1.029081@0] secmon secmon: assigned reserved memory node linux,secmon
  580. [ 1.035911@0] secmon: get page:dda87000, 5000
  581. [ 1.040016@0] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
  582. [ 1.047020@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  583. [ 1.053935@0] fb: osd_init_module
  584. [ 1.057235@0] fb: viu vsync irq: 52
  585. [ 1.060331@0] fb: viu2 vsync irq: 60
  586. [ 1.063976@0] 0x000000d8:Y=d8,U=0,V=0
  587. [ 1.067575@0] 0x000000d9:Y=d9,U=0,V=0
  588. [ 1.071234@0] 0x000000da:Y=da,U=0,V=0
  589. [ 1.074930@0] 0x000000db:Y=db,U=0,V=0
  590. [ 1.078584@0] 0x000000dc:Y=dc,U=0,V=0
  591. [ 1.082272@0] 0x000000dd:Y=dd,U=0,V=0
  592. [ 1.086294@0] fb: osd_rdma_init: rdma_table p=0xca448000,op=0xca448000 , v=0xe01fd000
  593. [ 1.093853@0] rdma_register, rdma_table_addr e02d1000 rdma_table_addr_phy ca449000 reg_buf dc81b000
  594. [ 1.102940@0] rdma_register success, handle 2 table_size 4096
  595. [ 1.108699@0] fb: osd_rdma_init:osd rdma handle = 2.
  596. [ 1.113694@0] fb: mem_size: 0x800000
  597. [ 1.117283@0] fb: mem_size: 0x1980000
  598. [ 1.120947@0] fb: mem_size: 0x100000
  599. [ 1.124521@0] fb: mem_size: 0x100000
  600. [ 1.128121@0] fb: mem_size: 0x800000
  601. [ 1.131755@0] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
  602. [ 1.138905@0] fb: reserved memory base:0x7f800000, size:800000
  603. [ 1.145141@0] vout: error: invalid vinfo1. current vmode is not supported
  604. [ 1.151575@0] fb: init fbdev bpp is:32
  605. [ 1.156835@0] fb: set osd0 reverse as NONE
  606. [ 1.159441@0] vout: error: invalid vinfo1. current vmode is not supported
  607. [ 1.174305@0] fb: osd probe OK
  608. [ 1.175112@0] hdmitx: system: amhdmitx_probe start
  609. [ 1.176505@0] hdmitx: system: Ver: 20190624
  610. [ 1.180758@0] hdmitx: system: hdmitx_device.chip_type : 10
  611. [ 1.186233@0] hdmitx: system: hdmitx_device.dongle_mode: 0
  612. [ 1.191776@0] hdmitx: system: not find product desc
  613. [ 1.196665@0] hdmitx: system: not find match pwr-ctl
  614. [ 1.201664@0] hdmitx: system: not find drm_amhdmitx
  615. [ 1.206550@0] hdmitx: system: hpd irq = 46
  616. [ 1.210746@0] hdmitx: system: hdcp22_tx_skp failed to probe
  617. [ 1.216266@0] hdmitx: system: hdcp22_tx_esm failed to probe
  618. [ 1.222338@0] vout: vout1: register server: hdmitx_vout_server
  619. [ 1.227713@0] vout: vout2: register server: hdmitx_vout2_server
  620. [ 1.234383@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  621. [ 1.238865@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  622. [ 1.243993@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  623. [ 1.249152@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  624. [ 1.254310@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  625. [ 1.259488@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  626. [ 1.264633@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  627. [ 1.269795@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  628. [ 1.274975@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  629. [ 1.280127@0] hdmitx: hw: hdmitx_get_format:0x0
  630. [ 1.284668@0] hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
  631. [ 1.289656@0] hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xda0504f7
  632. [ 1.295320@0] hdmitx: hw: avmute set to 1
  633. [ 1.299108@0] hdmitx: system: fmt_attr 444,8bit
  634. [ 1.303733@0] hdmitx: system: amhdmitx_probe end
  635. [ 1.308948@0] lcd: driver version: 20181012(5-g12a)
  636. [ 1.313303@0] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
  637. [ 1.320095@0] lcd: lcd_clktree_probe
  638. [ 1.323419@0] lcd: status: 0
  639. [ 1.326329@0] vout: vout1: register server: lcd_vout_server
  640. [ 1.331922@0] vout: vout2: register server: lcd_vout2_server
  641. [ 1.337632@0] lcd: lcd_get_config from dts
  642. [ 1.341725@0] lcd: no range_setting
  643. [ 1.345266@0] lcd: TV070WSM, mipi, 8bit, 600x1024
  644. [ 1.349962@0] lcd: pixel_clk = 44.248MHz, bit_rate = 353.984MHz
  645. [ 1.356216@0] lcd: lcd_fops_create OK
  646. [ 1.359559@0] vout: error: invalid vinfo1. current vmode is not supported
  647. [ 1.366405@0] fb: current vmode=invalid, cmd: 0x20000
  648. [ 1.371482@0] lcd: request lcd_vsync_irq successful
  649. [ 1.376396@0] lcd: request lcd_vsync2_irq successful
  650. [ 1.381356@0] lcd: lcd_probe ok
  651. [ 1.384859@0] vout: create vout attribute OK
  652. [ 1.388941@0] vout: vout_fops_create OK
  653. [ 1.392631@0] vout: vout1: register server: nulldisp_vout_server
  654. [ 1.398832@0] vout: tvout monitor interval:500(ms), timeout cnt:20
  655. [ 1.404929@0] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
  656. [ 1.411825@0] cvbs_out: vdac open.0 = 0x906001, 0x0
  657. [ 1.416727@0]
  658. [ 1.416727@0] vdac_enable: on:1,module_sel:8
  659. [ 1.422659@0] cvbs_out: already display in uboot
  660. [ 1.427301@0] vout: init mode 576cvbs set ok
  661. [ 1.431581@0] vout: aml_tvout_mode_monitor
  662. [ 1.435722@0] vout: aml_vout_probe OK
  663. [ 1.440043@0] chip type:0x28
  664. [ 1.442589@0] NO valid ramdump args:0 0
  665. [ 1.446899@2] Advanced Linux Sound Architecture Driver Initialized.
  666. [ 1.453029@2] Bluetooth: Core ver 2.22
  667. [ 1.456223@2] NET: Registered protocol family 31
  668. [ 1.460850@2] Bluetooth: HCI device and connection manager initialized
  669. [ 1.467398@2] Bluetooth: HCI socket layer initialized
  670. [ 1.472451@2] Bluetooth: L2CAP socket layer initialized
  671. [ 1.477746@2] Bluetooth: SCO socket layer initialized
  672. [ 1.483290@1] NetLabel: Initializing
  673. [ 1.486370@1] NetLabel: domain hash size = 128
  674. [ 1.490917@1] NetLabel: protocols = UNLABELED CIPSOv4
  675. [ 1.496134@1] NetLabel: unlabeled traffic allowed by default
  676. [ 1.504985@1] clocksource: Switched to clocksource arch_sys_counter
  677. [ 1.544417@0] clear:1a000000, free:1a000000, tick:95222 us
  678. [ 1.574428@1] VFS: Disk quotas dquot_6.6.0
  679. [ 1.574506@1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  680. [ 1.590653@1] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
  681. [ 1.590687@1] jtag: module init
  682. [ 1.593595@1] jtag: select is configured apao
  683. [ 1.597771@1] jtag: select is replaced by boot param
  684. [ 1.602790@1] jtag: module probed ok
  685. [ 1.606602@1] NET: Registered protocol family 2
  686. [ 1.611449@1] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  687. [ 1.618196@1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  688. [ 1.624873@1] TCP: Hash tables configured (established 4096 bind 4096)
  689. [ 1.631424@1] UDP hash table entries: 256 (order: 1, 8192 bytes)
  690. [ 1.637429@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  691. [ 1.643989@1] NET: Registered protocol family 1
  692. [ 1.650221@1] wifi: power_on_pin_OD = 0;
  693. [ 1.652363@1] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  694. [ 1.658334@1] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  695. [ 1.665028@1] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  696. [ 1.671623@1] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  697. [ 1.677838@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
  698. [ 1.685702@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  699. [ 1.691835@1] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
  700. [ 1.697793@1] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  701. [ 1.704786@1] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
  702. [ 1.710647@1] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  703. [ 1.716623@1] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  704. [ 1.722022@1] aml_wifi wifi: [wifi_setup_dt] irq num is:(70)
  705. [ 1.727630@1] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
  706. [ 1.733589@1] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
  707. [ 1.742278@1] enable_pmuserenr_all() start
  708. [ 1.743537@1] enable_pmuserenr_all() end
  709. [ 1.747498@1] hw perfevents: clusterb_enabled = 0
  710. [ 1.752209@1] hw perfevents: cpumasks 0xf, 0x0
  711. [ 1.756694@1] hw perfevents: cluster A irq = 25
  712. [ 1.761288@1] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  713. [ 1.772607@1] audit: initializing netlink subsys (disabled)
  714. [ 1.775284@1] audit: type=2000 audit(1.424:1): initialized
  715. [ 1.781560@1] workingset: timestamp_bits=30 max_order=20 bucket_order=0
  716. [ 1.796423@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  717. [ 1.797115@1] exFAT: Version 1.2.9
  718. [ 1.801437@1] Registering sdcardfs 0.1
  719. [ 1.804197@1] ntfs: driver 2.1.32 [Flags: R/O].
  720. [ 1.808866@1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  721. [ 1.816642@1] fuse init (API version 7.26)
  722. [ 1.825147@1] NET: Registered protocol family 38
  723. [ 1.825183@1] Key type asymmetric registered
  724. [ 1.828818@1] Asymmetric key parser 'x509' registered
  725. [ 1.834085@1] bounce: pool size: 64 pages
  726. [ 1.838182@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
  727. [ 1.845548@1] io scheduler noop registered (default)
  728. [ 1.850538@1] io scheduler deadline registered
  729. [ 1.855015@1] io scheduler cfq registered
  730. [ 1.868874@2] random: fast init done
  731. [ 1.868939@2] random: crng init done
  732. [ 1.879621@1] brd: module loaded
  733. [ 1.885457@1] loop: module loaded
  734. [ 1.886237@1] zram: Added device: zram0
  735. [ 1.887272@1] mtdoops: mtd device (mtddev=name/number) must be supplied
  736. [ 1.894557@1] libphy: Fixed MDIO Bus: probed
  737. [ 1.898231@1] tun: Universal TUN/TAP device driver, 1.6
  738. [ 1.903170@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  739. [ 1.910482@1] REG0:Addr = e04fc540
  740. [ 1.913069@1] auto_cali_idx 0
  741. [ 1.916504@1] meson6-dwmac ff3f0000.ethernet: no reset control found
  742. [ 1.922425@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
  743. [ 1.927662@1] Ring mode enabled
  744. [ 1.930906@1] DMA HW capability register supported[ 1.935624@1] Normal descriptors
  745. [ 1.938953@1] RX Checksum Offload Engine supported
  746. [ 1.943851@1] COE Type 2
  747. [ 1.946478@1] TX Checksum insertion supported
  748. [ 1.950936@1] Wake-Up On Lan supported
  749. [ 1.954837@1] Enable RX Mitigation via HW Watchdog Timer
  750. [ 1.962874@1] libphy: stmmac: probed
  751. [ 1.963787@1] eth%d: No PHY found
  752. [ 1.990173@1] ethclk81 ff3f0000.ethernet: no reset control found
  753. [ 1.990538@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
  754. [ 1.995812@1] Ring mode enabled
  755. [ 1.999039@1] DMA HW capability register supported[ 2.003763@1] Normal descriptors
  756. [ 2.007087@1] RX Checksum Offload Engine supported
  757. [ 2.011987@1] COE Type 2
  758. [ 2.014611@1] TX Checksum insertion supported
  759. [ 2.019074@1] Wake-Up On Lan supported
  760. [ 2.022924@1] Enable RX Mitigation via HW Watchdog Timer
  761. [ 2.031006@1] libphy: stmmac: probed
  762. [ 2.031923@1] eth%d: No PHY found
  763. [ 2.049289@1] PPP generic driver version 2.4.2
  764. [ 2.049496@1] PPP BSD Compression module registered
  765. [ 2.052998@1] PPP Deflate Compression module registered
  766. [ 2.058257@1] PPP MPPE Compression module registered
  767. [ 2.063229@1] NET: Registered protocol family 24
  768. [ 2.067947@1] usbcore: registered new interface driver asix
  769. [ 2.073561@1] usbcore: registered new interface driver ax88179_178a
  770. [ 2.079816@1] usbcore: registered new interface driver cdc_ether
  771. [ 2.085860@1] usbcore: registered new interface driver net1080
  772. [ 2.091724@1] usbcore: registered new interface driver cdc_subset
  773. [ 2.097844@1] usbcore: registered new interface driver zaurus
  774. [ 2.103629@1] usbcore: registered new interface driver cdc_ncm
  775. [ 2.110062@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  776. [ 2.116176@1] ehci-pci: EHCI PCI platform driver
  777. [ 2.120858@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  778. [ 2.127207@1] ohci-pci: OHCI PCI platform driver
  779. [ 2.132418@1] usbcore: registered new interface driver cdc_acm
  780. [ 2.137691@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  781. [ 2.145983@1] usbcore: registered new interface driver usb-storage
  782. [ 2.152243@1] usbcore: registered new interface driver usbserial
  783. [ 2.158549@1] mousedev: PS/2 mouse device common for all mice
  784. [ 2.164201@1] usbcore: registered new interface driver xpad
  785. [ 2.169709@1] i2c /dev entries driver
  786. [ 2.173465@1] IR NEC protocol handler initialized
  787. [ 2.177947@1] IR RC5(x/sz) protocol handler initialized
  788. [ 2.183188@1] IR RC6 protocol handler initialized
  789. [ 2.187918@1] IR JVC protocol handler initialized
  790. [ 2.192638@1] IR Sony protocol handler initialized
  791. [ 2.197456@1] IR SANYO protocol handler initialized
  792. [ 2.202350@1] IR Sharp protocol handler initialized
  793. [ 2.207255@1] IR MCE Keyboard/mouse protocol handler initialized
  794. [ 2.213288@1] IR XMP protocol handler initialized
  795. [ 2.218100@1] usbcore: registered new interface driver uvcvideo
  796. [ 2.223965@1] USB Video Class driver (1.1.1)
  797. [ 2.228321@1] usbcore: registered new interface driver cx231xx
  798. [ 2.234120@1] md: linear personality registered for level -1
  799. [ 2.240358@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  800. [ 2.248588@1] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
  801. [ 2.256894@1] Bluetooth: HCI UART driver ver 2.3
  802. [ 2.261509@1] Bluetooth: HCI UART protocol H4 registered
  803. [ 2.267120@1] cpuidle: enable-method property 'psci' found operations
  804. [ 2.273447@1] cpuidle: enable-method property 'psci' found operations
  805. [ 2.279897@1] cpuidle: enable-method property 'psci' found operations
  806. [ 2.286379@1] cpuidle: enable-method property 'psci' found operations
  807. [ 2.293920@1] ledtrig-cpu: registered to indicate activity on CPUs
  808. [ 2.299335@1] hidraw: raw HID events driver (C) Jiri Kosina
  809. [ 2.304905@1] usbcore: registered new interface driver usbhid
  810. [ 2.310332@1] usbhid: USB HID core driver
  811. [ 2.314544@1] ashmem: initialized
  812. [ 2.318760@1] value of voltage_tolerance 0
  813. [ 2.322807@1] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  814. [ 2.328569@1] ff803000.serial: clock gate not found
  815. [ 2.332511@1] meson_uart ff803000.serial: ==uart0 reg addr = e069c000
  816. [ 2.338966@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 36, base_baud = 1500000) is a meson_uart
  817. [ 2.353975@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  818. [ 2.356626@1] console [ttyS0] enabled
  819. [ 2.356626@1] console [ttyS0] enabled
  820. [ 2.363889@1] bootconsole [aml-uart0] disabled
  821. [ 2.363889@1] bootconsole [aml-uart0] disabled
  822. [ 2.373163@1] meson_uart ffd24000.serial: ==uart1 reg addr = e069e000
  823. [ 2.379172@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 45, base_baud = 1500000) is a meson_uart
  824. [ 2.389524@1] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xe06b1000
  825. [ 2.398845@1] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xe06bd080
  826. [ 2.410198@1] Error: Driver 'meson_reset' is already registered, aborting...
  827. [ 2.416262@1] aml_dma ff63e000.aml_dma: Aml dma
  828. [ 2.421212@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  829. [ 2.426848@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
  830. [ 2.433685@1] meson-remote: Driver init
  831. [ 2.437335@1] meson-remote: remote_probe
  832. [ 2.441123@1] meson-remote ff808040.rc: protocol = 0x1
  833. [ 2.446223@1] meson-remote ff808040.rc: led_blink = 1
  834. [ 2.451254@1] meson-remote ff808040.rc: led_blink_frq = 100
  835. [ 2.456912@1] meson-remote ff808040.rc: platform_data irq =44
  836. [ 2.462638@1] meson-remote ff808040.rc: custom_number = 3
  837. [ 2.467985@1] meson-remote ff808040.rc: ptable->map_size = 50
  838. [ 2.473701@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1
  839. [ 2.480890@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04
  840. [ 2.487218@1] meson-remote ff808040.rc: ptable->release_delay = 80
  841. [ 2.493393@1] meson-remote ff808040.rc: ptable->map_size = 53
  842. [ 2.499092@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2
  843. [ 2.506283@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01
  844. [ 2.512610@1] meson-remote ff808040.rc: ptable->release_delay = 80
  845. [ 2.518781@1] meson-remote ff808040.rc: ptable->map_size = 17
  846. [ 2.524483@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3
  847. [ 2.531677@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02
  848. [ 2.538004@1] meson-remote ff808040.rc: ptable->release_delay = 80
  849. [ 2.544158@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
  850. [ 2.550917@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
  851. [ 2.556722@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
  852. [ 2.562533@1] meson-remote ff808040.rc: reg=0x8, val=0x960050
  853. [ 2.568249@1] meson-remote ff808040.rc: reg=0xc, val=0x480028
  854. [ 2.573970@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
  855. [ 2.579950@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800
  856. [ 2.585842@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
  857. [ 2.591476@1] meson-remote ff808040.rc: reg=0x20, val=0x0
  858. [ 2.596851@1] meson-remote ff808040.rc: reg=0x24, val=0x0
  859. [ 2.602223@1] meson-remote ff808040.rc: reg=0x28, val=0x0
  860. [ 2.608061@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0
  861. [ 2.615093@1] meson-remote: IR XMP protocol handler initialized
  862. [ 2.622785@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
  863. [ 2.628219@1] ge2d: ge2d_init_module
  864. [ 2.631580@1] ge2d: ge2d_dev major:236
  865. [ 2.635263@1] ge2d: clock source clk_ge2d_gate dc902340
  866. [ 2.640383@1] ge2d: clock clk_ge2d source dc902440
  867. [ 2.645047@1] ge2d: clock source clk_vapb_0 dc9024c0
  868. [ 2.649982@1] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
  869. [ 2.657235@1] ge2d: ge2d clock is 499 MHZ
  870. [ 2.661166@1] ge2d: find address resource
  871. [ 2.665154@1] ge2d: map io source 0xff940000,size=65536 to 0xe0810000
  872. [ 2.671559@1] ge2d: reserved mem init failed
  873. [ 2.675801@1] ge2d: ge2d: pdev=dd3a3800, irq=51, clk=dc902340
  874. [ 2.681556@1] ge2d: ge2d start monitor
  875. [ 2.685336@2] ge2d: ge2d workqueue monitor start
  876. [ 2.685774@1] [tsync_pcr_init]init success.
  877. [ 2.686018@1] amvideom vsync irq: 52
  878. [ 2.686648@1] hdmitx: hdcp: hdmitx_hdcp_init
  879. [ 2.687179@1] vout: vout2: create vout2 attribute OK
  880. [ 2.687282@1] vout: vout2: vout2_fops_create OK
  881. [ 2.687461@1] vout: vout2: clktree_init
  882. [ 2.687464@1] vout: vout2: register server: nulldisp_vout2_server
  883. [ 2.687561@1] vout: vout2: init mode null set ok
  884. [ 2.687563@1] vout: vout2: aml_vout2_probe OK
  885. [ 2.687671@1] DI: di_module_init ok.
  886. [ 2.687674@1] DI: di_module_init: major 510
  887. [ 2.688037@1] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  888. [ 2.688042@1] di:flag_cma=1
  889. [ 2.688044@1] DI: CMA size 0x2800000.
  890. [ 2.688064@1] pre_irq:67
  891. [ 2.688071@1] post_irq:68
  892. [ 2.688073@1] DI: di_probe allocate rdma channel 0.
  893. [ 2.688080@1] di_get_vpu_clkb: get clk vpu error.
  894. [ 2.688083@1] DI: vpu clkb <334000000, 667000000>
  895. [ 2.688109@1] get clkb rate:333333328
  896. [ 2.688116@1] DI:enable vpu clkb.
  897. [ 2.688127@1] 0x000000de:Y=de,U=0,V=0
  898. [ 2.688129@1] 0x000000df:Y=df,U=0,V=0
  899. [ 2.688130@1] 0x000000e0:Y=e0,U=0,V=0
  900. [ 2.688132@1] 0x000000e1:Y=e1,U=0,V=0
  901. [ 2.688133@1] 0x000000e2:Y=e2,U=0,V=0
  902. [ 2.688135@1] 0x000000e3:Y=e3,U=0,V=0
  903. [ 2.688137@1] 0x000000f0:Y=f0,U=0,V=0
  904. [ 2.688138@1] 0x000000f1:Y=f1,U=0,V=0
  905. [ 2.688140@1] 0x000000f2:Y=f2,U=0,V=0
  906. [ 2.688141@1] 0x000000f3:Y=f3,U=0,V=0
  907. [ 2.688145@1] 0x000000f4:Y=f4,U=0,V=0
  908. [ 2.688147@1] 0x000000f5:Y=f5,U=0,V=0
  909. [ 2.688148@1] 0x000000f6:Y=f6,U=0,V=0
  910. [ 2.688150@1] 0x000000f7:Y=f7,U=0,V=0
  911. [ 2.688152@1] 0x000000f8:Y=f8,U=0,V=0
  912. [ 2.688153@1] 0x000000f9:Y=f9,U=0,V=0
  913. [ 2.688157@1] 0x000000fa:Y=fa,U=0,V=0
  914. [ 2.688159@1] 0x000000fb:Y=fb,U=0,V=0
  915. [ 2.688160@1] 0x000000fc:Y=fc,U=0,V=0
  916. [ 2.688162@1] 0x000000fd:Y=fd,U=0,V=0
  917. [ 2.688164@1] 0x000000fe:Y=fe,U=0,V=0
  918. [ 2.688165@1] 0x000000ff:Y=ff,U=0,V=0
  919. [ 2.688168@1] 0x0000003a:Y=3a,U=0,V=0
  920. [ 2.688170@1] 0x0000003b:Y=3b,U=0,V=0
  921. [ 2.688171@1] 0x0000003c:Y=3c,U=0,V=0
  922. [ 2.688173@1] DI: support multi decoding 58~59~60.
  923. [ 2.688363@1] DI: di_probe:Di use HRTIMER
  924. [ 2.688461@1] di_probe:ok
  925. [ 2.688536@1] vdin_drv_init: major 509
  926. [ 2.689898@1] rdma_register, rdma_table_addr e0807000 rdma_table_addr_phy ca44a000 reg_buf dc235c00
  927. [ 2.689901@1] rdma_register success, handle 3 table_size 512
  928. [ 2.689903@1] vdin_drv_probe:vdin.0 rdma hanld 3.
  929. [ 2.690154@1] vdin vdin0: assigned reserved memory node linux,vdin0_cma
  930. [ 2.690156@1]
  931. [ 2.690156@1] vdin memory resource done.
  932. [ 2.690160@1] vdin0 cma_mem_size = 64 MB
  933. [ 2.690163@1] vdin0 irq: 49 rdma irq: 2
  934. [ 2.690166@1] set_canvas_manual = 0
  935. [ 2.690168@1] no urgent_en found
  936. [ 2.690200@1] get fclk_div5 err
  937. [ 2.690203@1] vdin_drv_probe: vdin cannot get msr clk !!!
  938. [ 2.690231@1] vdin_drv_probe: driver initialized ok
  939. [ 2.690319@1] rdma_register, rdma_table_addr e0809000 rdma_table_addr_phy ca44b000 reg_buf dc236000
  940. [ 2.690321@1] rdma_register success, handle 4 table_size 512
  941. [ 2.690323@1] vdin_drv_probe:vdin.1 rdma hanld 4.
  942. [ 2.690484@1] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  943. [ 2.690485@1]
  944. [ 2.690485@1] vdin memory resource done.
  945. [ 2.690488@1] vdin1 cma_mem_size = 64 MB
  946. [ 2.690491@1] vdin1 irq: 50 rdma irq: 4
  947. [ 2.690493@1] set_canvas_manual = 0
  948. [ 2.690494@1] no urgent_en found
  949. [ 2.690516@1] get fclk_div5 err
  950. [ 2.690518@1] vdin_drv_probe: vdin cannot get msr clk !!!
  951. [ 2.690524@1] vdin_debugfs_init only support debug vdin0 1
  952. [ 2.690525@1] vdin_drv_probe: driver initialized ok
  953. [ 2.690660@1] vdin_drv_init: vdin driver init done
  954. [ 2.690664@1] [viuin..]viuin_init_module viuin module init
  955. [ 2.690951@1] [viuin..]viuin_probe probe ok.
  956. [ 2.691404@1] [RX]-hdmirx: hdmirx_init.
  957. [ 2.691406@1] ESM HLD: Initializing...
  958. [ 2.691525@1] tvin_afe: tvafe_drv_init: major 507
  959. [ 2.691802@1] tvin_afe: tvafe_drv_init.
  960. [ 2.691936@1] tvafe_vbi: vbi: vbi_init.
  961. [ 2.692100@1] amvdec_csi module: init.
  962. [ 2.692104@1] amvdec_csi_init_module:major 505
  963. [ 2.692229@1] amvdec_csi module: init. ok
  964. [ 2.692235@1] amlvid:info: amlvideo_init called
  965. [ 2.692235@1] amlvid:info: amlvideo_create_instance called
  966. [ 2.692238@1] amlvid:info: v4l2_dev.name=:amlvideo-000
  967. [ 2.692379@1] amlvideo-000: V4L2 device registered as video10
  968. [ 2.692380@1] amlvid:info: amlvideo_create_instance called
  969. [ 2.692382@1] amlvid:info: v4l2_dev.name=:amlvideo-001
  970. [ 2.692486@1] amlvideo-001: V4L2 device registered as video23
  971. [ 2.692617@1] PPMGRDRV: warn: ppmgr module init func called
  972. [ 2.692731@1] PPMGRDRV: err: ppmgr_driver_probe called
  973. [ 2.692821@1] PPMGRDRV: info: ppmgr_dev major:504
  974. [ 2.693076@1] ppmgr: probe of ppmgr failed with error -22
  975. [ 2.693526@1] ionvideo-000: V4L2 device registered as video13
  976. [ 2.693629@1] ionvideo-001: V4L2 device registered as video14
  977. [ 2.693723@1] ionvideo-002: V4L2 device registered as video15
  978. [ 2.693816@1] ionvideo-003: V4L2 device registered as video16
  979. [ 2.693935@1] ionvideo-004: V4L2 device registered as video17
  980. [ 2.694036@1] ionvideo-005: V4L2 device registered as video18
  981. [ 2.694130@1] ionvideo-006: V4L2 device registered as video19
  982. [ 2.694223@1] ionvideo-007: V4L2 device registered as video20
  983. [ 2.694325@1] ionvideo-008: V4L2 device registered as video21
  984. [ 2.694327@1] ionvid: info: Video Technology Magazine Ion Video
  985. [ 2.694328@1] ionvid: info: Capture Board ver 1.0 successfully loaded
  986. [ 2.694612@1] picdec: picdec_driver_probe called.
  987. [ 2.694858@1] picdec: probe of picdec failed with error -22
  988. [ 2.695042@1] videosync_create_instance dev_s dc237400,dev_s->dev dd3b7280
  989. [ 2.695045@1] videosync_create_instance reg videosync.0
  990. [ 2.695120@1] aml_vecm_init:module init
  991. [ 2.695125@3] videosync_thread started
  992. [ 2.695387@1]
  993. [ 2.695387@1] VECM probe start
  994. [ 2.695650@1] vlock_status_init vlock_en:0
  995. [ 2.695678@1] Can't find wb_sel.
  996. [ 2.695679@1] hdr:Can't find cfg_en_osd_100.
  997. [ 2.695685@1] amlogic, vecm
  998. [ 2.695686@1] vlock dt support: 1
  999. [ 2.695687@1] vlock dt new_fsm: 0
  1000. [ 2.695688@1] vlock dt hwver: 0
  1001. [ 2.695689@1] vlock dt phlock_en: 0
  1002. [ 2.695691@1] Can't find vlock_en.
  1003. [ 2.695693@1] Can't find vlock_mode.
  1004. [ 2.695694@1] Can't find vlock_pll_m_limit.
  1005. [ 2.695696@1] Can't find vlock_line_limit.
  1006. [ 2.695722@1] param_config vlock_en:0
  1007. [ 2.695725@1] aml_vecm_probe: ok
  1008. [ 2.695769@1] amdolby_vision_init:module init
  1009. [ 2.696068@1]
  1010. [ 2.696068@1] amdolby_vision probe start & ver: 20181220
  1011. [ 2.696074@1]
  1012. [ 2.696074@1] cpu_id=2 tvmode=0
  1013. [ 2.696190@1] dolby_vision_init_receiver(dvel)
  1014. [ 2.696195@1] dolby_vision_init_receiver: dvel
  1015. [ 2.696378@1] amdolby_vision_probe: ok
  1016. [ 2.696429@1] prime_sl module init
  1017. [ 2.696806@1] vm_init .
  1018. [ 2.697738@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  1019. [ 2.698684@1] meson-mmc: >>>>>>>>hostbase e0836000, dmode
  1020. [ 2.698977@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1021. [ 2.698979@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  1022. [ 2.699007@1] meson-mmc: emmc: fixdiv calc done: adj = 2d2000
  1023. [ 2.796657@1] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
  1024. [ 2.796664@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1025. [ 2.796666@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000345
  1026. [ 2.796677@1] meson-mmc: Data 1 aligned delay is 0
  1027. [ 2.796682@1] meson-mmc: emmc: clk 199999997 tuning start
  1028. [ 2.800627@1] meson-mmc: emmc: rx_tuning_result[0] = 40
  1029. [ 2.801737@1] meson-mmc: emmc: rx_tuning_result[1] = 40
  1030. [ 2.801767@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  1031. [ 2.802885@1] meson-mmc: emmc: rx_tuning_result[3] = 40
  1032. [ 2.803987@1] meson-mmc: emmc: rx_tuning_result[4] = 40
  1033. [ 2.803989@1] meson-mmc: emmc: best_win_start =3, best_win_size =4
  1034. [ 2.803993@1] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000345,sd_emmc_regs->gadjust=0x2000
  1035. [ 2.804094@1] emmc: new HS200 MMC card at address 0001
  1036. [ 2.808668@1] emmc: clock 199999997, 8-bit-bus-width
  1037. [ 2.808668@1]
  1038. [ 2.808668@1] mmcblk0: emmc:0001 CJNB4R 58.2 GiB
  1039. [ 2.808823@1] mmcblk0boot0: emmc:0001 CJNB4R partition 1 4.00 MiB
  1040. [ 2.812985@1] mmcblk0boot1: emmc:0001 CJNB4R partition 2 4.00 MiB
  1041. [ 2.817142@1] mmcblk0rpmb: emmc:0001 CJNB4R partition 3 4.00 MiB
  1042. [ 2.818114@1] meson-mmc: Enter aml_emmc_partition_ops
  1043. [ 2.818494@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  1044. [ 2.818496@1] meson-mmc: add_emmc_partition
  1045. [ 2.818655@1] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  1046. [ 2.818770@1] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  1047. [ 2.818873@1] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
  1048. [ 2.818983@1] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
  1049. [ 2.819085@1] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
  1050. [ 2.819196@1] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
  1051. [ 2.819299@1] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
  1052. [ 2.819402@1] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000
  1053. [ 2.819515@1] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
  1054. [ 2.819619@1] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
  1055. [ 2.819748@1] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
  1056. [ 2.819867@1] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
  1057. [ 2.819971@1] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000
  1058. [ 2.820085@1] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000
  1059. [ 2.820188@1] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000
  1060. [ 2.820308@1] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000020000000
  1061. [ 2.820413@1] meson-mmc: [mmcblk0p17] odm offset 0x00007de00000, size 0x000008000000
  1062. [ 2.820517@1] meson-mmc: [mmcblk0p18] system offset 0x000086600000, size 0x000074000000
  1063. [ 2.820629@1] meson-mmc: [mmcblk0p19] product offset 0x0000fae00000, size 0x000008000000
  1064. [ 2.820733@1] meson-mmc: [mmcblk0p20] data offset 0x000103600000, size 0x000d8c200000
  1065. [ 2.820753@1] card key: card_blk_probe.
  1066. [ 2.820757@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  1067. [ 2.820760@1] emmc key: emmc_key_init:205 ok.
  1068. [ 2.823098@1] meson-mmc: amlmmc_dtb_init: register dtb chardev
  1069. [ 2.823099@1] meson-mmc: calc 641449d8, store 641449d8
  1070. [ 2.825031@1] meson-mmc: calc 641449d8, store 641449d8
  1071. [ 2.825032@1] meson-mmc: total valid 2
  1072. [ 2.825310@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  1073. [ 2.825310@1] meson-mmc: Exit aml_emmc_partition_ops OK.
  1074. [ 12.188984@0] vout: aml_tvout_mode_work: monitor_timeout
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!