API tools faq
paste
Advertisement
YorkLTx

Project R8 from Hell - VT

YorkLTx
Sep 7th, 2017
123
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 63.02 KB | None | 0 0
raw download clone embed print report
  1. -----CLEAN UP---------------------------------------------------------------------------------------------------------------
  2.  
  3. [2017-09-05 23:53:17] [Output] : ★ Lukas Ruiz walks towards the toolbox, popping it up, upon grasping a pair of heavy duty-
  4. [2017-09-05 23:53:21] [Output] : ★ working gloves. ((Lukas Ruiz))
  5. [2017-09-05 23:53:35] [Output] : ★ Lukas Ruiz slides them in his hands, as he would grasp the crowbar afterwards.
  6. [2017-09-05 23:53:45] [Output] : Lukas Ruiz: (( from the toolbox. ))
  7. [2017-09-05 23:53:57] [Output] : ★ Lukas Ruiz walks towards the front of the Audi.
  8. [2017-09-05 23:54:20] [Output] : ★ Lukas Ruiz drops the crowbar on the ground infront of the car, moving towards the back, where-
  9. [2017-09-05 23:54:24] [Output] : ★ the jackstand would be at. ((Lukas Ruiz))
  10. [2017-09-05 23:54:41] [Output] : ★ Lukas Ruiz slides it on the side of the car, giving it a few pumps, as he would lift-
  11. [2017-09-05 23:54:59] [Output] : ★ the front side from the car only, until the wheels are handing. ((Lukas Ruiz))
  12. [2017-09-05 23:55:23] [Output] : ★ Lukas Ruiz reaches back towards the front of the car, inspecting the destroyed bumper.
  13. [2017-09-05 23:55:47] [Output] : ★ Lukas Ruiz grabs the center of the bumper, trying to pull it off with his own hands.
  14. [2017-09-05 23:56:04] [Output] : ((OOC Chance at 60%)) Lukas Ruiz's attempt has succeeded.
  15. [2017-09-05 23:56:26] [Output] : ★ Lukas Ruiz would have been able to break the bumper, although the ends would still be hanging-
  16. [2017-09-05 23:56:33] [Output] : ★ on the car by the screws. ((Lukas Ruiz))
  17. [2017-09-05 23:56:49] [Output] : ★ Lukas Ruiz grasps a 14mm from the toolbox, moving towards one end of the bumper.
  18. [2017-09-05 23:57:14] [Output] : ★ Lukas Ruiz starts unscrewing one of the two, rotating the wrench counter-clockwise, as he would-
  19. [2017-09-05 23:57:20] [Output] : ★ pull one of the ends off. ((Lukas Ruiz))
  20. [2017-09-05 23:57:28] [Output] : ★ Lukas Ruiz throws the debris over to the other side of the garage.
  21. [2017-09-05 23:58:04] [Output] : ★ Lukas Ruiz moves over to the other side of the car, inspecting the other end of the broken bumper,
  22. [2017-09-05 23:58:23] [Output] : ★ repeating the process with the wrench, upon throwing the broken fiber glass piece- ((Lukas Ruiz))
  23. [2017-09-05 23:58:32] [Output] : ★ to the pile of debris. ((Lukas Ruiz))
  24. [2017-09-05 23:59:03] [Output] : ★ As the front bumper would be off, Lukas would then grasp the crowbar from infront of- ((Lukas Ruiz))
  25. [2017-09-05 23:59:25] [Output] : ★ the R8, moving towards the left-side fender, bent almost untill halfway. ((Lukas Ruiz))
  26. [2017-09-05 23:59:47] [Output] : ★ Not looking to lose much time with it, Lukas would place the crowbar next to the spacing- ((Lukas Ruiz))
  27. [2017-09-05 23:59:59] [Output] : ★ between the fender and the door, pulling it outwards. ((Lukas Ruiz))
  28. [2017-09-06 00:00:17] [Output] : ★ Lukas Ruiz would gradually move down the fender, ocasionally pulling it outwards.
  29. [2017-09-06 00:00:26] [Output] : ★ After some minutes, would fender would be loose from one side. ((Lukas Ruiz))
  30. [2017-09-06 00:00:47] [Output] : ★ Lukas Ruiz fits the crowbar on the bumpy side of the fender, randomly pushing it outwards with-
  31. [2017-09-06 00:00:56] [Output] : ★ the crowbar, as it would finally come out. ((Lukas Ruiz))
  32. [2017-09-06 00:01:22] [Output] : ★ Carefully grabbing the fender, so he doesn't hurt himself, although the safety gloves, ((Lukas Ruiz))
  33. [2017-09-06 00:01:41] [Output] : ★ Lukas walks halfway towards the pile of fiber, throwing the fender there. ((Lukas Ruiz))
  34. [2017-09-06 00:02:01] [Output] : ★ You would now be able to see some of the damage on the frame. ((Lukas Ruiz))
  35. [2017-09-06 00:02:22] [Output] : ★ Lukas Ruiz moves over to the other side, as he would start to do the same with the right side fender.
  36. [2017-09-06 00:02:42] [Output] : ★ Lukas Ruiz fits the crowbar on the top, doing repeated pushes with it; you would start to notice-
  37. [2017-09-06 00:02:50] [Output] : ★ some sweat dripping off Lukas' face. ((Lukas Ruiz))
  38. [2017-09-06 00:03:24] [Output] : ★ As one specific zone would not come out, Lukas would hit it from the outside- ((Lukas Ruiz))
  39. [2017-09-06 00:03:38] [Output] : ★ half-dozen times, trying to make it loose. ((Lukas Ruiz))
  40. [2017-09-06 00:03:46] [Output] : ★ Lukas Ruiz tries on the inside again, pushing it outwards.
  41. [2017-09-06 00:03:48] [Output] : ((OOC Chance at 85%)) Lukas Ruiz's attempt has succeeded.
  42. [2017-09-06 00:03:58] [Output] : ★ Fender would come off completely. ((Lukas Ruiz))
  43. [2017-09-06 00:04:21] [Output] : ★ Lukas Ruiz grabs it from one end, dragging it towards the pile; the other end would be scraping-
  44. [2017-09-06 00:04:24] [Output] : ★ on the ground. ((Lukas Ruiz))
  45. [2017-09-06 00:04:42] [Output] : ★ Lukas Ruiz reaches for his backpack, sliding out a water bottle and pocket papers.
  46. [2017-09-06 00:05:21] [Output] : ★ Lukas Ruiz cleans his sweat, face and neck, upon taking a quick rest, whilist taking sips from the-
  47. [2017-09-06 00:05:25] [Output] : ★ plastic water bottle. ((Lukas Ruiz))
  48. [2017-09-06 00:05:48] [Output] : ★ Lukas Ruiz throws both to the pile, upon finishing his water, as he would get back to work.
  49. [2017-09-06 00:06:11] [Output] : ★ Bumper and fenders would now be done; Only the hood left on the first stage. ((Lukas Ruiz))
  50. [2017-09-06 00:06:33] [Output] : ★ Lukas Ruiz grasps the 14mm back from where he dropped it, near the right wheel,
  51. [2017-09-06 00:06:46] [Output] : ★ upon lifting the hood with his other hand. ((Lukas Ruiz))
  52. [2017-09-06 00:07:08] [Output] : ★ You would hear a loud noise from moving the hood, as you would see Lukas applying- ((Lukas Ruiz))
  53. [2017-09-06 00:07:12] [Output] : ★ some effort onto the action. ((Lukas Ruiz))
  54. [2017-09-06 00:09:29] [Output] : ★ Lukas Ruiz unscrews the duo of hydraulic hood struts, letting the hood fall on the car as he would-
  55. [2017-09-06 00:09:33] [Output] : ★ finish removing the struts. ((Lukas Ruiz))
  56. [2017-09-06 00:09:56] [Output] : ★ You would see it sliding down within the audi's lines, falling on the ground with it's- ((Lukas Ruiz))
  57. [2017-09-06 00:10:01] [Output] : ★ front part. ((Lukas Ruiz))
  58. [2017-09-06 00:10:29] [Output] : ★ Lukas Ruiz seizes the damaged hood with both hands, lifting it up with ease, upon throwing it-
  59. [2017-09-06 00:10:32] [Output] : ★ to the pile. ((Lukas Ruiz))
  60. [2017-09-06 00:11:08] [Output] : ★ You would now see a black plastic cover, where the trunk would be fitted on, covering- ((Lukas Ruiz))
  61. [2017-09-06 00:11:12] [Output] : ★ the whole front space. ((Lukas Ruiz))
  62. [2017-09-06 00:11:28] [Output] : Lukas Ruiz: (( moreless this, but damaged https://i.pinimg.com/736x/1f/dd/be/1fddbed8283c5f9915169973d4c7aa88--beer-cooler-junk
  63. [2017-09-06 00:11:28] [Output] : yard-cars.jpg ))
  64. [2017-09-06 00:11:56] [Output] : ★ Lukas Ruiz searches for the screws on the cover, which he figured would have 1 on each end.
  65. [2017-09-06 00:12:39] [Output] : ★ Lukas Ruiz grasps a 12mm from the toolbox, as he would then unscrew the 2 screws on the-
  66. [2017-09-06 00:12:46] [Output] : ★ top, next to the windshield. ((Lukas Ruiz))
  67. [2017-09-06 00:13:16] [Output] : ★ Due to the damage, the lower one would be impossible to remove with a screw, ((Lukas Ruiz))
  68. [2017-09-06 00:13:31] [Output] : ★ which Lukas would finished off with the crowbar, ripping it off. ((Lukas Ruiz))
  69. [2017-09-06 00:13:42] [Output] : ★ Lukas Ruiz takes the cracked cover out of the way.
  70. [2017-09-06 00:14:07] [Output] : ★ whilist grabbing the 12mm on his hand, Lukas would then proceed to place it on the- ((Lukas Ruiz))
  71. [2017-09-06 00:14:34] [Output] : ★ top of the also cracked headlights, giving the screws a few counter-clockwise twists. ((Lukas Ruiz))
  72. [2017-09-06 00:14:57] [Output] : ★ Lukas Ruiz pushes the headlight a tiny bit front, disconecting all the wires coming from the car.
  73. [2017-09-06 00:15:19] [Output] : ★ The headlight, not salvageable either, would be thrown to the pile of debris. ((Lukas Ruiz))
  74. [2017-09-06 00:18:14] [Output] : ★ Lukas Ruiz would move onto the other side of the car, preparing to remove the second headlight.
  75. [2017-09-06 00:20:58] [Output] : ★ Lukas Ruiz drops the 12mm on one of the screws, untightening both, upon throwing the wrench-
  76. [2017-09-06 00:21:08] [Output] : ★ to the toolbox, around 2 meters away. ((Lukas Ruiz))
  77. [2017-09-06 00:21:11] [Output] : ((OOC Chance at 50%)) Lukas Ruiz's attempt has failed.
  78. [2017-09-06 00:21:15] [Output] : [English] Lukas Ruiz says: Fuck my life...
  79. [2017-09-06 00:21:35] [Output] : ★ Lukas Ruiz wrench would bounce off the toolbox, dropping next to it.
  80. [2017-09-06 00:22:00] [Output] : ★ Lukas Ruiz centers himself back of the headlight, as he would push it outwards.
  81. [2017-09-06 00:22:24] [Output] : ★ After a few failed pushes, Lukas would grasp the crowbar, assisting himself with it. ((Lukas Ruiz))
  82. [2017-09-06 00:22:40] [Output] : ★ Only then the headlight would come loose; Lukas would disconnect the wiring, ((Lukas Ruiz))
  83. [2017-09-06 00:22:50] [Output] : ★ throwing the destroyed fancy headlight to the pile. ((Lukas Ruiz))
  84. [2017-09-06 00:23:19] [Output] : ★ As it landed, the glass would shatter into medium sized pieces, making a mess all- ((Lukas Ruiz))
  85. [2017-09-06 00:23:21] [Output] : ★ over. ((Lukas Ruiz))
  86. [2017-09-06 00:23:47] [Output] : ★ Lukas Ruiz sighs, upon cleaning his sweat on the face with the back of the gloves.
  87. [2017-09-06 00:24:20] [Output] : ★ As of now, bumper and fenders would be off, hood, trunk cover and headlights. ((Lukas Ruiz))
  88. [2017-09-06 00:24:36] [Output] : ★ The frame would now be free of seeing, at least most part of it. ((Lukas Ruiz))
  89. [2017-09-06 00:26:13] [Output] : ★ Lukas Ruiz would then drop everything in his hands, keeping the gloves, as he would now-t
  90. [2017-09-06 00:26:39] [Output] : ★ look deeper into the front of the Audi, finding small shattered pieces of fiber, or- ((Lukas Ruiz))
  91. [2017-09-06 00:26:42] [Output] : ★ anything else. ((Lukas Ruiz))
  92. [2017-09-06 00:27:05] [Output] : ★ After around 20 minutes, Lukas would find a quite generous collection of broken pieces, ((Lukas Ruiz))
  93. [2017-09-06 00:27:14] [Output] : ★ found all around the front of the chassis. ((Lukas Ruiz))
  94. [2017-09-06 00:28:06] [Output] : ★ Lukas Ruiz would try to carry most of it in his hands while making a shell form with his hands,
  95. [2017-09-06 00:28:12] [Output] : ★ dropping it in the pile. ((Lukas Ruiz))
  96. [2017-09-06 00:28:40] [Output] : ★ The rest that Lukas wouldn't have carried, would be ignored and left on the floor. ((Lukas Ruiz))
  97.  
  98. -----FIXING THE FRAME-------------------------------------------------------------------------------------------------------
  99.  
  100. [2017-09-06 19:35:30] [Output] : ★ Lukas Ruiz walks towards the jackstand on the left side of the R8, under the driver's door.
  101. [2017-09-06 19:36:06] [Output] : ★ Lukas Ruiz crouches, looking under the car, as he would slowly lower it with the jackstand.
  102. [2017-09-06 19:36:21] [Output] : ★ Lukas Ruiz stands back up, with the wheels touching the ground completely, as he would grasp the-
  103. [2017-09-06 19:36:33] [Output] : ★ handles on the jackstand, pushing it away from the car. ((Lukas Ruiz))
  104. [2017-09-06 19:37:17] [Output] : ★ Lukas Ruiz reaches for the wall behind him, wrapping both of his hands around a 10ton Puller.
  105. [2017-09-06 19:37:57] [Output] : ★ Lukas Ruiz drags it towards the front of the car, which would be between two lifts; both of the-
  106. [2017-09-06 19:38:22] [Output] : ★ lifts would be normally screwd to the garage's concrete ground, with 4 big nuts on each- ((Lukas Ruiz))
  107. [2017-09-06 19:38:27] [Output] : ★ of the lift's 4 corners. ((Lukas Ruiz))
  108. [2017-09-06 19:39:00] [Output] : ★ - making it almost impossible to give in. ((Lukas Ruiz))
  109. [2017-09-06 19:39:23] [Output] : ★ Lukas Ruiz walks back to the wall, grasping a set of 4 big heavy duty steel chains.
  110. [2017-09-06 19:39:51] [Output] : ★ Lukas Ruiz drops two of them next to the hydraulic puller tool, and the other two on the back of the
  111. [2017-09-06 19:39:53] [Output] : ★ Audi. ((Lukas Ruiz))
  112. [2017-09-06 19:40:27] [Output] : ★ Lukas Ruiz These two in the back, he would attach one of their ends to the tow hook of the-
  113. [2017-09-06 19:40:29] [Output] : ★ car. ((Lukas Ruiz))
  114. [2017-09-06 19:40:48] [Output] : ★ Lukas Ruiz the other ends, he would hug them around two piles of the lift behind the car.
  115. [2017-09-06 19:41:16] [Output] : ★ As this setup would be ready, Lukas would place both hands on the trunk, ((Lukas Ruiz))
  116. [2017-09-06 19:41:37] [Output] : ★ pushing the car front with maximum effort, so the chains would be straightened at max. ((Lukas Ruiz))
  117. [2017-09-06 19:42:13] [Output] : ★ Lukas Ruiz then drags himself towards the front of the car, turning his cap on his head to the back,
  118. [2017-09-06 19:42:17] [Output] : ★ and rubbing his hands. ((Lukas Ruiz))
  119. [2017-09-06 19:42:33] [Output] : ★ Lukas Ruiz crouches infront of the chain which would connect the lift infront of the car to the-
  120. [2017-09-06 19:43:14] [Output] : ★ puller, as he would wrap one end of the chain around the pillar, and the other- ((Lukas Ruiz))
  121. [2017-09-06 19:43:22] [Output] : ★ end to the hook on the puller. ((Lukas Ruiz))
  122. [2017-09-06 19:43:54] [Output] : ★ Lukas Ruiz takes a step right, towards the vehicle, as he would finally get to the fourth and last-
  123. [2017-09-06 19:43:55] [Output] : ★ chain. ((Lukas Ruiz))
  124. [2017-09-06 19:44:15] [Output] : ★ Lukas Ruiz wraps it around the other hook on the puller, on the other end.
  125. [2017-09-06 19:44:44] [Output] : ★ The chain's other end, he would wrap it around the front part of the R8's frame, ((Lukas Ruiz))
  126. [2017-09-06 19:45:06] [Output] : ★ securing the chain's hook to itself, upon circuling the frame. ((Lukas Ruiz))
  127. [2017-09-06 19:45:23] [Output] : ★ Lukas Ruiz then moves back towards the other chain, as he would push it as much as he could,
  128. [2017-09-06 19:46:16] [Output] : ★ so both chains attached to the puller would be as straightened as possible. ((Lukas Ruiz))
  129. [2017-09-06 19:46:34] [Output] : ★ Lukas Ruiz stands back up, walking towards the wall, as he would un-wrap the plastic around-
  130. [2017-09-06 19:46:56] [Output] : ★ Lukas Ruiz the new high pressure air pump he had just ordered.
  131. [2017-09-06 19:47:58] [Output] : ★ Lukas Ruiz walks towards the puller tool, as he attach the pump's hose to a small venthole on-
  132. [2017-09-06 19:48:00] [Output] : ★ puller. ((Lukas Ruiz))
  133.  
  134. ( http://imgur.com/a/Ngirc )
  135.  
  136. [2017-09-06 19:48:22] [Output] : ★ From now on, as all the chains would be as stretched as Lukas could, the air given from- ((Lukas Ruiz))
  137. [2017-09-06 19:48:55] [Output] : ★ the air pump to the hydraulic puller, would make the puller's arm shrink, pushing- ((Lukas Ruiz))
  138. [2017-09-06 19:49:01] [Output] : ★ the damaged frame outwards. ((Lukas Ruiz))
  139. [2017-09-06 19:49:27] [Output] : Lukas Ruiz: (( The setup would be mounted to the right part of the car, sorry for not having mentioned. ))
  140. [2017-09-06 19:49:58] [Output] : ★ Lukas Ruiz starts to give the air pump slow and paused pushes, as you would be able to listen-
  141. [2017-09-06 19:50:12] [Output] : ★ to some long stretching noises coming from the frame. ((Lukas Ruiz))
  142. [2017-09-06 19:50:56] [Output] : ★ At this point, the frame would start to come back to close to it's original position, ((Lukas Ruiz))
  143. [2017-09-06 19:50:59] [Output] : ★ before the crash. ((Lukas Ruiz))
  144. [2017-09-06 19:51:48] [Output] : ★ After a few minutes of pumping and measuring, Lukas would quite the right side- ((Lukas Ruiz))
  145. [2017-09-06 19:52:21] [Output] : ★ of the frame, judging it would be as close as he could to it's original position; ((Lukas Ruiz))
  146. [2017-09-06 19:52:44] [Output] : ★ this position would be missed by milimeters, which only could be eliminated by- ((Lukas Ruiz))
  147. [2017-09-06 19:52:54] [Output] : ★ professional eletric machines. ((Lukas Ruiz))
  148. [2017-09-06 19:53:03] [Output] : Lukas Ruiz: (( monsterous machines* ))
  149. [2017-09-06 19:53:24] [Output] : ★ Lukas Ruiz slowly releases the pressure of the puller, as the arm would move foward, releasing-
  150. [2017-09-06 19:53:33] [Output] : ★ the pressure on the chains. ((Lukas Ruiz))
  151. [2017-09-06 19:53:57] [Output] : ★ Lukas Ruiz unhooks the chain attached to the lift, as he would drag it to the-
  152. [2017-09-06 19:54:07] [Output] : ★ opposite side's pillar on the lift. ((Lukas Ruiz))
  153. [2017-09-06 19:54:29] [Output] : ★ Lukas Ruiz then also drags the hook attached to the frame to the other side, securing and scretching-
  154. [2017-09-06 19:54:34] [Output] : ★ back all the chains. ((Lukas Ruiz))
  155. [2017-09-06 19:54:48] [Output] : ★ Lukas Ruiz walks back towards the wall, grasping the last steel chain.
  156. [2017-09-06 19:55:07] [Output] : ★ Lukas Ruiz wraps it around the pillar where the puller would have been attached to,
  157. [2017-09-06 19:55:21] [Output] : ★ leading it to the frame of the car, making sure the frame on that side would be secured- ((Lukas Ruiz))
  158. [2017-09-06 19:55:23] [Output] : ★ in place. ((Lukas Ruiz))
  159. [2017-09-06 19:55:53] [Output] : ★ Lukas Ruiz mounts back the air pump in place, giving it slow and paused pushes in the beggining.
  160. [2017-09-06 19:56:21] [Output] : ★ He would check the frame every two or three pushes, making sure nothing succumbing- ((Lukas Ruiz))
  161. [2017-09-06 19:56:24] [Output] : ★ on the frame. ((Lukas Ruiz))
  162. [2017-09-06 19:57:02] [Output] : ★ Lukas Ruiz continues his work with the pump, checking the frame and the measurements,
  163. [2017-09-06 19:57:51] [Output] : ★ as he would reach a final shape of the frame he would consider realistic. ((Lukas Ruiz))
  164. [2017-09-06 19:58:55] [Output] : ★ To finish off with the frame, Lukas would grasp back the measurement tape, previously- ((Lukas Ruiz))
  165. [2017-09-06 19:59:10] [Output] : ★ toke from the toolbox, as he would measure everything around the frame, whilist- ((Lukas Ruiz))
  166. [2017-09-06 19:59:33] [Output] : ★ consulting his phone, where he would have opened a document with all the factory- ((Lukas Ruiz))
  167. [2017-09-06 19:59:42] [Output] : ★ measurements provided by Audi, in their official website. ((Lukas Ruiz))
  168. [2017-09-06 20:00:02] [Output] : ★ Realising not everything would be in place, as expected, Lukas would eventually use- ((Lukas Ruiz))
  169. [2017-09-06 20:00:27] [Output] : ★ the puller, or most of the times grab the hammer from the tool box, ((Lukas Ruiz))
  170. [2017-09-06 20:00:46] [Output] : ★ giving strong hits on the main structures on the frame. ((Lukas Ruiz))
  171. [2017-09-06 20:01:15] [Output] : ★ As he would have finished with the banging and the pulling, Lukas would give the- ((Lukas Ruiz))
  172. [2017-09-06 20:01:45] [Output] : ★ frame a final check-up, upon letting it rest on the chains; these would be stretched, ((Lukas Ruiz))
  173. [2017-09-06 20:01:58] [Output] : ★ so the fragile frame doesn't give in at any moment. ((Lukas Ruiz))
  174. [2017-09-06 20:02:40] [Output] : ★ Lukas Ruiz grasps a torch from the toolbox, flicking the small switch on the top of the handle,
  175. [2017-09-06 20:02:47] [Output] : ★ as it would start to spit flames. ((Lukas Ruiz))
  176. [2017-09-06 20:03:03] [Output] : ★ Lukas Ruiz regulates the size of the flame, as he would move to the front of the car,
  177. [2017-09-06 20:04:08] [Output] : ★ heating up some critical spots in the frame, which after cooling down back, would be- ((Lukas Ruiz))
  178. [2017-09-06 20:05:02] [Output] : ★ toughed up, and able to hold the frame in that position for longer. ((Lukas Ruiz))
  179.  
  180. -----FABRICATING AND WELDING STEEL PIECES TO THE FRAME----------------------------------------------------------------------
  181.  
  182. [2017-09-06 21:32:05] [Output] : ★ Lukas Ruiz reaches for the wall where the rest of the parts would be, getting ahold of a pack of-
  183. [2017-09-06 21:32:20] [Output] : ★ 1 meter long steel bars, wrapped up in carboard and tape. ((Lukas Ruiz))
  184. [2017-09-06 21:32:58] [Output] : ★ These would have various sizes, thickness and width, although all would be 1m long. ((Lukas Ruiz))
  185. [2017-09-06 21:33:22] [Output] : ★ Lukas Ruiz cuts the cardboard off with an utility knife on the toolbox, revealing the stainless steel-
  186. [2017-09-06 21:33:24] [Output] : ★ bars. ((Lukas Ruiz))
  187. [2017-09-06 21:33:55] [Output] : ★ Lukas Ruiz separates them, one by one, spreading them around the floor in packs of two, according-
  188. [2017-09-06 21:34:07] [Output] : ★ to the sizes; 10 different sizes, 20 bars. ((Lukas Ruiz))
  189. [2017-09-06 21:35:43] [Output] : ★ Lukas Ruiz drags himself towards the toolbox, grasping a pack of coloured marking pens.
  190. [2017-09-06 21:36:19] [Output] : ★ Lukas Ruiz slides out 5 different colours, moving back to the spread bars.
  191. [2017-09-06 21:36:42] [Output] : ★ Lukas Ruiz quickly inspects each pack, ignoring some, as he would paint a long line with each-
  192. [2017-09-06 21:37:09] [Output] : ★ colour on the bars; one colour for one pack of two. ((Lukas Ruiz))
  193. [2017-09-06 21:37:27] [Output] : ★ Lukas Ruiz then gets up, walks towards the front of the car, as he would mark the same colours-
  194. [2017-09-06 21:37:44] [Output] : ★ onto specific parts of the frame, which he would be recreating from the steel bars. ((Lukas Ruiz))
  195. [2017-09-06 21:38:02] [Output] : ★ These zones he marked would be the ones with un-repaireable damage, which needed- ((Lukas Ruiz))
  196. [2017-09-06 21:38:04] [Output] : ★ urgent replacement. ((Lukas Ruiz))
  197. [2017-09-06 21:38:42] [Output] : ★ There would be five colours: red, blue, yellow, green and purple. ((Lukas Ruiz))
  198. [2017-09-06 21:38:55] [Output] : Lukas Ruiz: (( Colour scheme on the frame: http://i.imgur.com/iOJcHg8.jpg ))
  199. [2017-09-06 21:39:24] [Output] : ★ Lukas Ruiz stands back up, pushing the coloured pack of bars near the car, aswell as the toolbox and-
  200. [2017-09-06 21:39:46] [Output] : ★ the new professional welder he had bought few hours back. ((Lukas Ruiz))
  201. [2017-09-06 21:40:54] [Output] : ★ Lukas Ruiz walks towards the entrance, dragging a couple of useless small shelves he had laying-
  202. [2017-09-06 21:41:11] [Output] : ★ around in the garage towards the car, setting them up on the ground. ((Lukas Ruiz))
  203. [2017-09-06 21:41:31] [Output] : ★ These would be creating something near to a work table, where he would be able to- ((Lukas Ruiz))
  204. [2017-09-06 21:41:37] [Output] : ★ fabricate the new parts. ((Lukas Ruiz))
  205. [2017-09-06 21:42:24] [Output] : ★ Lukas Ruiz walks towards the non-coloured bars, grabbing the skinnies ones, and dragging them-
  206. [2017-09-06 21:42:27] [Output] : ★ to his previous position. ((Lukas Ruiz))
  207. [2017-09-06 21:42:54] [Output] : ★ Lukas Ruiz grasps the measurement tape from the toolbox, as he would drag himself towards the front-
  208. [2017-09-06 21:42:57] [Output] : ★ of the car. ((Lukas Ruiz))
  209. [2017-09-06 21:43:28] [Output] : ★ Lukas Ruiz measures the length between the purple marked frame part to around half-way of-
  210. [2017-09-06 21:43:40] [Output] : ★ the blue marked one, where he would put a temporary bar. ((Lukas Ruiz))
  211. [2017-09-06 21:43:57] [Output] : ★ Lukas Ruiz memorizes the length, walking back towards his improvised table.
  212. [2017-09-06 21:44:22] [Output] : ★ Lukas Ruiz sets up one of the bar, as he would mark the length he had memorized.
  213. [2017-09-06 21:45:16] [Output] : ★ Lukas Ruiz seizes the grinder from the toolbox, aswell as it's battery, mounting them.
  214. [2017-09-06 21:45:50] [Output] : ★ Lukas Ruiz starts the grinder, as he would cut both bars where he had previously marked.
  215. [2017-09-06 21:46:04] [Output] : ★ Lukas Ruiz grasps these with both hands, dragging them to the front of the car.
  216. [2017-09-06 21:46:41] [Output] : ★ Lukas Ruiz quickly punches them in between the designated spot, one on each end, as he would-
  217. [2017-09-06 21:46:49] [Output] : ★ quickly drag the welder over. ((Lukas Ruiz))
  218. [2017-09-06 21:47:09] [Output] : ★ Lukas Ruiz slides the safety glasses on, turning on the grinder.
  219. [2017-09-06 21:47:35] [Output] : ★ Lukas Ruiz clicks the switch for a few times waiting for it to heat; Upon having it on max heat,
  220. [2017-09-06 21:48:03] [Output] : ★ Lukas would weld both ends of the bars onto the frame, making sure they're secure and- ((Lukas Ruiz))
  221. [2017-09-06 21:48:16] [Output] : ★ ready to support the weight the main bars would be supporting. ((Lukas Ruiz))
  222. [2017-09-06 21:48:50] [Output] : ★ Lukas Ruiz then grabs back the grinder, pointing it at the blue marked zone.
  223. [2017-09-06 21:49:14] [Output] : ★ Lukas Ruiz carefully cuts it on the end attached to the purple marked part, in the front, cutting it-
  224. [2017-09-06 21:49:20] [Output] : ★ as straight as he could. ((Lukas Ruiz))
  225. [2017-09-06 21:49:39] [Output] : ★ Lukas Ruiz then moves to the other end, until he reaches the length of the temporary bar he welded.
  226. [2017-09-06 21:49:59] [Output] : ★ Lukas Ruiz cuts off the part, as he would finally push the big piece of steel off.
  227. [2017-09-06 21:50:21] [Output] : ★ Lukas Ruiz quickly gets to his table, taking exact measures of this piece of frame he cut off.
  228. [2017-09-06 21:50:59] [Output] : ★ Between cutting, measuring, welding and smoothing off, the new piece of steel would be- ((Lukas Ruiz))
  229. [2017-09-06 21:51:02] [Output] : ★ done. ((Lukas Ruiz))
  230. [2017-09-06 21:51:37] [Output] : ★ To save some time, Lukas would fabricate a identical one, for the opposite side, so the- ((Lukas Ruiz))
  231. [2017-09-06 21:51:45] [Output] : ★ frame doesn't suffer much more. ((Lukas Ruiz))
  232. [2017-09-06 21:52:01] [Output] : ★ Lukas Ruiz walks back towards the car, as he would slide one of the new fabricated pieces in-
  233. [2017-09-06 21:52:09] [Output] : ★ the right side of the car, Lukas' left. ((Lukas Ruiz))
  234. [2017-09-06 21:52:35] [Output] : ★ Lukas Ruiz aligns it with the other one, giving it a few hits with a hammer to slide it in the exact-
  235. [2017-09-06 21:52:37] [Output] : ★ position. ((Lukas Ruiz))
  236. [2017-09-06 21:52:59] [Output] : ★ Lukas Ruiz starts back the automatic welder, as he would weld this piece onto the frame.
  237. [2017-09-06 21:53:30] [Output] : ★ Due to Lukas' not so sharp welding skills, he would have to add a bit more weld to some- ((Lukas Ruiz))
  238. [2017-09-06 21:53:41] [Output] : ★ spots he missed or got out of line. ((Lukas Ruiz))
  239. [2017-09-06 21:54:08] [Output] : ★ As the right side would be done, Lukas would stand back up, taking a quick rest while- ((Lukas Ruiz))
  240. [2017-09-06 21:54:31] [Output] : ★ he turns off the welder and check's it's temperatures. ((Lukas Ruiz))
  241. [2017-09-06 21:54:52] [Output] : ★ Lukas Ruiz walks back towards the table, grasping the grinder again, taking it to the car.
  242. [2017-09-06 21:55:25] [Output] : ★ Lukas Ruiz flicks the switch, giving it a couple of revs, as he would then start cutting the blue-
  243. [2017-09-06 21:55:37] [Output] : ★ marked frame piece, from the opposite side he had just finished working on. ((Lukas Ruiz))
  244. [2017-09-06 21:55:56] [Output] : ★ Lukas Ruiz rips it off of the frame, quickly grasping the fabricated one, sliding it in place with-
  245. [2017-09-06 21:55:59] [Output] : ★ the hammer. ((Lukas Ruiz))
  246. [2017-09-06 21:56:29] [Output] : ★ Lukas Ruiz starts back the welder, as he would finish off with these type of bars, the blue marked ones
  247. [2017-09-06 21:56:56] [Output] : ★ After around 25 minutes of welding and cutting, the most important basis of the front- ((Lukas Ruiz))
  248. [2017-09-06 21:57:09] [Output] : ★ chassis would be replaced and doing their job. ((Lukas Ruiz))
  249. [2017-09-06 21:58:34] [Output] : ★ Lukas Ruiz then remembers he had forgot the temporary bar, wrapping his hands around the grinder,
  250. [2017-09-06 21:58:36] [Output] : ★ once again. ((Lukas Ruiz))
  251. [2017-09-06 21:59:07] [Output] : ★ Lukas Ruiz cuts this one off, as he would throw it away from his working zone, onto the pile he-
  252. [2017-09-06 21:59:17] [Output] : ★ had started before with the broken body parts. ((Lukas Ruiz))
  253. [2017-09-06 21:59:35] [Output] : ★ Lukas Ruiz quickly scrapes off weld excess that remained in the frame from the temporary bar,
  254. [2017-09-06 21:59:49] [Output] : ★ so it looks cleaner, although not worrying too much about it. ((Lukas Ruiz))
  255. [2017-09-06 22:00:27] [Output] : ★ Lukas Ruiz stands back up, taking a couple of steps towards the toolbox, grasping back the-
  256. [2017-09-06 22:00:33] [Output] : ★ measure tape. ((Lukas Ruiz))
  257. [2017-09-06 22:01:33] [Output] : ★ Lukas Ruiz takes precise measures of the yellow marked bars on the frame, as he would write-
  258. [2017-09-06 22:01:42] [Output] : ★ them down on his phone, with a few taps on the touchscreen. ((Lukas Ruiz))
  259. [2017-09-06 22:02:36] [Output] : ★ Lukas Ruiz also measures the length from the red marked piece until he reaches the cabin, which-
  260. [2017-09-06 22:02:46] [Output] : ★ should be just under 95cm. ((Lukas Ruiz))
  261. [2017-09-06 22:03:51] [Output] : ★ Lukas Ruiz quickly fabricates a temporary bar for that spot, to hold the frame in position,
  262. [2017-09-06 22:04:00] [Output] : ★ as he would fit it in the body afterwards. ((Lukas Ruiz))
  263. [2017-09-06 22:04:16] [Output] : ★ Once again, welds it in the frame, making sure it's secure enough. ((Lukas Ruiz))
  264. [2017-09-06 22:06:07] [Output] : ★ Lukas Ruiz then proceeds to grasp back the grinder with his right palm, noticing the wear on-
  265. [2017-09-06 22:06:11] [Output] : ★ the grinding wheel. ((Lukas Ruiz))
  266. [2017-09-06 22:06:16] [Output] : [English] Lukas Ruiz says: Erm, this should do for now.
  267. [2017-09-06 22:06:33] [Output] : ★ Lukas Ruiz places it by the yellow marked bar on the frame, by the left side, starting the grinder.
  268. [2017-09-06 22:07:03] [Output] : ★ Lukas Ruiz grinds this piece off, on both ends, punching it off downward, after cutting most of it.
  269. [2017-09-06 22:07:27] [Output] : ★ Lukas Ruiz moves on to the one on the opposite side, cutting this off almost halfway, when the-
  270. [2017-09-06 22:07:42] [Output] : ★ grinding wheel would be doing nothing else but tickles to the metal. ((Lukas Ruiz))
  271. [2017-09-06 22:08:10] [Output] : ★ Realising it would be time to replace the wheel, Lukas looks a similar sized one in the- ((Lukas Ruiz))
  272. [2017-09-06 22:08:33] [Output] : ★ toolbox, as he would find one with a centimeter smaller diameter. ((Lukas Ruiz))
  273. [2017-09-06 22:08:38] [Output] : [English] Lukas Ruiz says: Should do just fine.
  274. [2017-09-06 22:08:59] [Output] : ★ Lukas Ruiz finishes off with the yellow marked bar, as he would grab one of them as a basis for-
  275. [2017-09-06 22:09:02] [Output] : ★ the new one. ((Lukas Ruiz))
  276. [2017-09-06 22:09:21] [Output] : ★ Lukas Ruiz lays it by new bar on the table, marking it all around with a pen.
  277. [2017-09-06 22:09:37] [Output] : ★ Lukas Ruiz cuts the excess off, as he would quickly inspects this piece.
  278. [2017-09-06 22:09:52] [Output] : ★ Lukas Ruiz approves the final result, as he would duplicate this one, with the remaining bar.
  279. [2017-09-06 22:10:09] [Output] : ★ Lukas Ruiz drags both towards the car, sliding them in place with his hands first, and then-
  280. [2017-09-06 22:10:21] [Output] : ★ more precisely with the hammer. ((Lukas Ruiz))
  281. [2017-09-06 22:10:41] [Output] : ★ Lukas Ruiz starts back the welder, as he would carefully weld these onto the frame, making sure-
  282. [2017-09-06 22:11:03] [Output] : ★ the slants and angle of the bar were in place. ((Lukas Ruiz))
  283. [2017-09-06 22:11:28] [Output] : ★ As both would be welded and the welds hard enough, Lukas would cut off the temporary bar- ((Lukas Ruiz))
  284. [2017-09-06 22:11:45] [Output] : ★ in the middle, scraping off the excess left on the frame has he had done before. ((Lukas Ruiz))
  285. [2017-09-06 22:12:11] [Output] : ★ With the two major beams replaced, only the red, purple and green ones were left. ((Lukas Ruiz))
  286. [2017-09-06 22:12:40] [Output] : ★ As these doesn't do anything much besides serving for support for bumpers and- ((Lukas Ruiz))
  287. [2017-09-06 22:13:00] [Output] : ★ such, Lukas would grab the grinder back, carefully cutting them off in a row. ((Lukas Ruiz)
  288. [2017-09-06 22:13:19] [Output] : ★ Lukas Ruiz hugs these around his chest, dragging them to the working table.
  289. [2017-09-06 22:13:56] [Output] : ★ Lukas Ruiz takes measurements of each of them, noting these down on his cellphone, as he would-
  290. [2017-09-06 22:14:07] [Output] : ★ be stacking these by his right as he would measure them. ((Lukas Ruiz))
  291. [2017-09-06 22:14:41] [Output] : ★ Lukas Ruiz spreads the specific new bars he had previously marked on the table, confirming the-
  292. [2017-09-06 22:14:47] [Output] : ★ measurements once again with the bars. ((Lukas Ruiz))
  293. [2017-09-06 22:15:05] [Output] : ★ Lukas Ruiz then passes these measurements over to the new bars, carefully cutting them accordingly.
  294. [2017-09-06 22:15:55] [Output] : ★ All of them would be straight besides the purple one, which would be a bit- ((Lukas Ruiz))
  295. [2017-09-06 22:16:06] [Output] : ★ curvy, which Lukas would have to mold correctly. ((Lukas Ruiz))
  296. [2017-09-06 22:16:50] [Output] : ★ Lukas Ruiz separates the fabricated and use-ready bars to the side, laying the purple one on the table.
  297. [2017-09-06 22:17:14] [Output] : ★ Lukas Ruiz overlays the original curved one under it, so he could guide himself, despite the damage-
  298. [2017-09-06 22:17:18] [Output] : ★ on it. ((Lukas Ruiz))
  299. [2017-09-06 22:17:48] [Output] : ★ Lukas Ruiz starts to hit hard bangs on the bar with the hammer, mixed with heating the hitting-
  300. [2017-09-06 22:17:55] [Output] : ★ zones with the torch in his toolbox. ((Lukas Ruiz))
  301. [2017-09-06 22:18:22] [Output] : ★ Around 30 minutes of molding after, Lukas would be satisfied with the ending result, even- ((Lukas Ruiz))
  302. [2017-09-06 22:18:31] [Output] : ★ it look as he wanted it to. ((Lukas Ruiz))
  303. [2017-09-06 22:19:00] [Output] : ★ Lukas Ruiz would then gather up the fabricated bars infront of the car, grasping one with his right-
  304. [2017-09-06 22:19:06] [Output] : ★ hand randomly, a green one. ((Lukas Ruiz))
  305. [2017-09-06 22:19:40] [Output] : ★ Lukas Ruiz extends it over the frame, setting up it's position with precision, surprising even himself.
  306. [2017-09-06 22:20:07] [Output] : ★ Lukas Ruiz starts the welder by flicking the ON/OFF switch on the bottom side of it.
  307. [2017-09-06 22:20:32] [Output] : ★ Lukas Ruiz lets it heat up for around thirty seconds, as he then would weld the skinny bar onto-
  308. [2017-09-06 22:20:58] [Output] : ★ the frame, always making sure the welds look strong and not too ugly. ((Lukas Ruiz))
  309. [2017-09-06 22:22:09] [Output] : ★ As he would finish with this one, he would grab the similar one on the floor. ((Lukas Ruiz))
  310. [2017-09-06 22:22:38] [Output] : ★ Lukas Ruiz quickly inspecting it with his hand, Lukas would fit it on the frame.
  311. [2017-09-06 22:23:11] [Output] : ★ Lukas Ruiz seizes back the welder, carefully pointing it at the bottom point of the fabricated bar.
  312. [2017-09-06 22:23:35] [Output] : ★ Lukas Ruiz spreads small welds spots all around it, just to make sure it's secure to the frame.
  313. [2017-09-06 22:23:57] [Output] : ★ Lukas Ruiz lets it dry out meanwhile he does the same on the top part, dropping small spots of weld.
  314. [2017-09-06 22:24:20] [Output] : ★ Lukas Ruiz would only then proceed to weld the bar all around, fully securing it to the frame.
  315. [2017-09-06 22:24:48] [Output] : ★ As he would weld, Lukas would ocasionally lift his safety glasses, checking the pro- ((Lukas Ruiz))
  316. [2017-09-06 22:24:54] [Output] : ★ -gress. ((Lukas Ruiz))
  317. [2017-09-06 22:25:26] [Output] : ★ Lukas Ruiz moves onto the top part, as he would also finish welding this one; drops a line of weld-
  318. [2017-09-06 22:25:51] [Output] : ★ on one side, evalues it; moves onto the next, doing the same thing, making sure- ((Lukas Ruiz))
  319. [2017-09-06 22:25:59] [Output] : ★ the welds are well done. ((Lukas Ruiz))
  320. [2017-09-06 22:26:17] [Output] : ★ As he would finish with these skinnier bars, Lukas would move onto to the last two, on the- ((Lukas Ruiz))
  321. [2017-09-06 22:26:30] [Output] : ★ front of the car, the ones which would have suffered the most damage due to the- ((Lukas Ruiz))
  322. [2017-09-06 22:26:33] [Output] : ★ front impact. ((Lukas Ruiz))
  323. [2017-09-06 23:14:13] [Output] : ★ Lukas Ruiz grasps the top one of from ground with his right hand, the curvy one, as he would-
  324. [2017-09-06 23:14:24] [Output] : ★ point it in the correct position with his eye ((Lukas Ruiz))
  325. [2017-09-06 23:15:04] [Output] : ★ Due to not having anything to hold on, Lukas would quickly reach for the toolbox with- ((Lukas Ruiz))
  326. [2017-09-06 23:15:18] [Output] : ★ his left palm, sliding out a roll of duct tape. ((Lukas Ruiz))
  327. [2017-09-06 23:15:41] [Output] : ★ Lukas Ruiz cuts a piece off, securing it on the bar and on the frame.
  328. [2017-09-06 23:15:56] [Output] : ★ Lukas Ruiz cuts another piece off with his mouth, glueing it on the other end of the bar.
  329. [2017-09-06 23:16:27] [Output] : ★ Lukas Ruiz now would carefully adjust it's placement back, grasping the welder with his steady-
  330. [2017-09-06 23:16:29] [Output] : ★ right hand. ((Lukas Ruiz))
  331. [2017-09-06 23:17:16] [Output] : ★ Lukas Ruiz would then drop small bits of weld on the bar's touching surface with the frame, just making
  332. [2017-09-06 23:17:35] [Output] : ★ sure it's correctly aligned and secure by itself. ((Lukas Ruiz))
  333. [2017-09-06 23:18:15] [Output] : ★ Lukas Ruiz rips off the duct tape from that side, as he would eventually move over to the other side.
  334. [2017-09-06 23:18:33] [Output] : ★ Lukas Ruiz takes two steps left, as he would carefully inspect the welding surface,
  335. [2017-09-06 23:18:45] [Output] : ★ cleaning some dust that would get in the way of the welds, left by the grinder. ((Lukas Ruiz))
  336. [2017-09-06 23:19:17] [Output] : ★ Once again, Lukas drops a few precise weld spots all around the bar and the frame. ((Lukas Ruiz))
  337. [2017-09-06 23:19:32] [Output] : ★ Lukas Ruiz rips off the duct tape, as he would then start to fully weld the bar, on both sides.
  338. [2017-09-06 23:20:08] [Output] : ★ Lukas Ruiz makes linear welds around the bar, eventually filling some spots a bit more, to ensure-
  339. [2017-09-06 23:20:18] [Output] : ★ more safety to the front of the vehicle. ((Lukas Ruiz))
  340. [2017-09-06 23:20:45] [Output] : ★ As one side would be done, Lukas would then finish the other end, welding the bar all- ((Lukas Ruiz))
  341. [2017-09-06 23:21:05] [Output] : ★ around with some precision, although the welds aren't too linear. ((Lukas Ruiz))
  342. [2017-09-06 23:21:36] [Output] : ★ As the top curvy one would be done, the one marked with the red colour, Lukas- ((Lukas Ruiz))
  343. [2017-09-06 23:21:43] [Output] : ★ would grasp the red one from the ground. ((Lukas Ruiz))
  344. [2017-09-06 23:22:15] [Output] : ★ Lukas Ruiz quickly sets it up on the frame, temporarely securing it with blue duct tape, just so he-
  345. [2017-09-06 23:22:28] [Output] : ★ doesn't risk it falling to the ground and having to fabricate another one. ((Lukas Ruiz))
  346. [2017-09-06 23:28:42] [Output] : ★ Lukas Ruiz grasps back the welder, as he would proceed to do the same to this bar he had done-
  347. [2017-09-06 23:28:47] [Output] : ★ to the previous one. ((Lukas Ruiz))
  348. [2017-09-06 23:29:13] [Output] : ★ Small weld spots all around to secure it onto the frame, followed by connected lines- ((Lukas Ruiz))
  349. [2017-09-06 23:31:19] [Output] : ★ of a thick weld, on both sides, fully connecting the last stainless bar to the frame. ((Lukas Ruiz))
  350. [2017-09-06 23:31:51] [Output] : ★ As all the frame work would be done, Lukas would stand back up, starting to unmount- ((Lukas Ruiz))
  351. [2017-09-06 23:32:03] [Output] : ★ the stretching setup, with the puller. ((Lukas Ruiz))
  352. [2017-09-06 23:33:30] [Output] : ★ Lukas Ruiz moves towards the right side of the R8, where the puller would be, as he would start-
  353. [2017-09-06 23:33:54] [Output] : ★ to unplug the air pump from puller, rotating a small wheel on it, as it would- ((Lukas Ruiz))
  354. [2017-09-06 23:34:47] [Output] : ★ let the air out and, due to that, the puller's arm would slowly release the pressure. ((Lukas Ruiz))
  355. [2017-09-06 23:35:08] [Output] : ★ The chains would slowly drop on the ground, as you wouldn't hear any sound coming form- ((Lukas Ruiz))
  356. [2017-09-06 23:35:10] [Output] : Lukas Ruiz: (( from* ))
  357. [2017-09-06 23:35:21] [Output] : ★ the frame, making sure it's secure. ((Lukas Ruiz))
  358. [2017-09-06 23:35:44] [Output] : ★ Lukas Ruiz unwraps the chain from the frame, laying it on the ground
  359. [2017-09-06 23:36:00] [Output] : ★ Lukas Ruiz moves over to the other side on the front of the car, wrapping the chain from the-
  360. [2017-09-06 23:36:11] [Output] : ★ lift's pillar, laying it on the ground also. ((Lukas Ruiz))
  361. [2017-09-06 23:36:35] [Output] : ★ Lukas Ruiz quickly checks the job he has done in the frame, checking up for failures in the welds.
  362. [2017-09-06 23:36:59] [Output] : ★ Lukas Ruiz wouldn't find any mis-welds, so he would proceed to grasp the hammer, hitting-
  363. [2017-09-06 23:37:12] [Output] : ★ a few smooth hits on the welds, testing if any would give in. ((Lukas Ruiz))
  364. [2017-09-06 23:37:19] [Output] : ((OOC Chance at 85%)) Lukas Ruiz's attempt has succeeded.
  365. [2017-09-06 23:37:38] [Output] : ★ Everything would be okay, as Lukas would drop the hammer on the toolbox. ((Lukas Ruiz))
  366.  
  367.  
  368. -----Replacing the broken rods----------------------------------------------------------------------------------------------
  369.  
  370. [2017-09-07 15:11:39] [Output] : ★ As the car would now be free of chains in the front, Lukas would take a few steps- ((Lukas Ruiz))
  371. [2017-09-07 15:12:01] [Output] : ★ towards the back of the R8, taking a quick gaze at the chains holding the car against- ((Lukas Ruiz))
  372. [2017-09-07 15:12:05] [Output] : ★ the lift. ((Lukas Ruiz))
  373. [2017-09-07 15:12:26] [Output] : ★ Lukas Ruiz jogs towards the front, supporting both hands on the frame, as he would push-
  374. [2017-09-07 15:12:46] [Output] : ★ the car back a few centimeters, releasing some pressure on the chains on the back. ((Lukas Ruiz))
  375. [2017-09-07 15:13:13] [Output] : ★ Lukas Ruiz walks back towards his previous position, as he would hold the chain with his left hand,
  376. [2017-09-07 15:13:31] [Output] : ★ whilist he would unhook it from itself, unwrapping it from the lift's pillar. ((Lukas Ruiz))
  377. [2017-09-07 15:13:51] [Output] : ★ Lukas Ruiz moves along the chain, also unhooking it from the car's tow hook, as he would do-
  378. [2017-09-07 15:14:00] [Output] : ★ the same for the other one with his free hand. ((Lukas Ruiz))
  379. [2017-09-07 15:14:15] [Output] : ★ Lukas Ruiz throws the chains away, freeing the car from any chains.
  380. [2017-09-07 15:14:34] [Output] : ★ Lukas Ruiz walks towards the wall, where the jackstand would be parked at.
  381. [2017-09-07 15:14:55] [Output] : ★ Lukas Ruiz drags it away of it's position, leading it towards the driver's side door, whereas he would-
  382. [2017-09-07 15:15:01] [Output] : ★ fit it beneath the car. ((Lukas Ruiz))
  383. [2017-09-07 15:15:20] [Output] : ★ Lukas Ruiz lays on the ground on his back, mounting the jack on the designated spot on the car's-
  384. [2017-09-07 15:15:23] [Output] : ★ lower frame. ((Lukas Ruiz))
  385. [2017-09-07 15:16:06] [Output] : ★ Lukas Ruiz stands back up, slowly pumping up the jackstand, lifting the car around 40 centimeters,
  386. [2017-09-07 15:16:11] [Output] : ★ until the wheels are up in the air. ((Lukas Ruiz))
  387. [2017-09-07 15:16:31] [Output] : ★ Lukas Ruiz hurries himself towards the toolbox, laying his right hand on a torque wrench, as he-
  388. [2017-09-07 15:17:03] [Output] : ★ would keep it on his left side armpit, as he would take a handful of tools with his right- ((Lukas Ruiz))
  389. [2017-09-07 15:17:05] [Output] : ★ palm. ((Lukas Ruiz))
  390. [2017-09-07 15:17:19] [Output] : ★ Lukas Ruiz takes these tools towards the front left wheel of the vehicle, laying them on the ground as-
  391. [2017-09-07 15:17:22] [Output] : ★ he would crouch. ((Lukas Ruiz))
  392. [2017-09-07 15:17:39] [Output] : ★ With the wheel up in the air, Lukas would choose the torque wrench from the ground, ((Lukas Ruiz))
  393. [2017-09-07 15:17:47] [Output] : ★ fitting this one of one of the 5 nuts in the wheel. ((Lukas Ruiz))
  394. [2017-09-07 15:18:24] [Output] : ★ Lukas Ruiz twists the wrench counter-clockwise with some effort, as he would loosen the-
  395. [2017-09-07 15:18:25] [Output] : ★ big nut. ((Lukas Ruiz))
  396. [2017-09-07 15:18:45] [Output] : ★ Lukas Ruiz moves towards the next nut, untightening this one also, with the help of the torque-
  397. [2017-09-07 15:18:52] [Output] : ★ wrench, as he would do the same for the rest three. ((Lukas Ruiz))
  398. [2017-09-07 15:19:06] [Output] : ★ As the nuts would be laying on the ground, along with the torque wrench, Lukas would- ((Lukas Ruiz))
  399. [2017-09-07 15:19:41] [Output] : ★ wrap his both hand's fingers around the Audi's wheels, lifting it up a bit upon pushing- ((Lukas Ruiz))
  400. [2017-09-07 15:19:45] [Output] : ★ it outwards of the car. ((Lukas Ruiz))
  401. [2017-09-07 15:20:07] [Output] : ★ Lukas Ruiz lays the wheel against the frame where the fender would mount on, by his left, as he-
  402. [2017-09-07 15:20:54] [Output] : ★ would take a closer look at the broken tie rods, taking a few conclusions of the process- ((Lukas Ruiz))
  403. [2017-09-07 15:20:57] [Output] : ★ of removing them. ((Lukas Ruiz))
  404. [2017-09-07 15:21:24] [Output] : ★ You'd see the inner tie rod snapped in half and the outer one, the smaller one, ((Lukas Ruiz))
  405. [2017-09-07 15:21:31] [Output] : ★ with a big crack on the main structure. ((Lukas Ruiz))
  406. [2017-09-07 15:22:25] [Output] : ★ Lukas Ruiz rotates the big brake disk away, as if he would turn the steering wheel counter-clockwise.
  407. [2017-09-07 15:22:35] [Output] : ★ - so he would have better access to the rods. ((Lukas Ruiz))
  408. [2017-09-07 15:23:18] [Output] : ★ Lukas Ruiz grasps a plier from the pack of tools he took from the toolbox, as he would-
  409. [2017-09-07 15:23:43] [Output] : ★ wrap it around a small pin on the end of the outer rod. ((Lukas Ruiz))
  410. [2017-09-07 15:23:55] [Output] : ★ Lukas Ruiz straightens it, pulling it out of the rod.
  411. [2017-09-07 15:24:14] [Output] : ★ Lukas Ruiz then reaches for a 19 milimeter ratchet from the ground, sliding it into-
  412. [2017-09-07 15:24:45] [Output] : ★ the rod's tail. ((Lukas Ruiz))
  413. [2017-09-07 15:25:11] [Output] : ★ Lukas Ruiz rotates it counter-clockwise carefully, breaking it loose.
  414. [2017-09-07 15:25:39] [Output] : ★ Lukas Ruiz then switches for another 19mm wrench, sliding into the rod, as he would untighten the-
  415. [2017-09-07 15:25:44] [Output] : ★ castle nut out. ((Lukas Ruiz))
  416. [2017-09-07 15:26:13] [Output] : ★ Lukas Ruiz reaches onto the pile of tools, choosing a special tie rod remover tool he bought from-
  417. [2017-09-07 15:26:20] [Output] : ★ the website he ordered the rods from. ((Lukas Ruiz))
  418. [2017-09-07 15:26:44] [Output] : ★ Lukas Ruiz slides it into the top part of the rod, upon seizing a hammer with his left hand from-
  419. [2017-09-07 15:27:28] [Output] : ★ the ground, hitting the tool from ground up, popping the rod out of the knuckle. ((Lukas Ruiz))
  420. [2017-09-07 15:27:59] [Output] : ★ Lukas Ruiz grabs a big plier from the toools with his right hand, wrapping it around the nut on the-
  421. [2017-09-07 15:28:11] [Output] : ★ beggining of the outer rod, as he would adjust it to the nut's size. ((Lukas Ruiz))
  422. [2017-09-07 15:28:42] [Output] : ★ Lukas Ruiz gives it a small push counter-clockwise to break it loose, as he would leave it-
  423. [2017-09-07 15:28:49] [Output] : ★ like that, dropping the plier on the ground. ((Lukas Ruiz))
  424. [2017-09-07 15:29:10] [Output] : ★ Lukas Ruiz then starts spinning the outer rod counter-clockwise, which would be facing downwards-
  425. [2017-09-07 15:29:19] [Output] : ★ as of the moment he would start spinning it. ((Lukas Ruiz))
  426. [2017-09-07 15:29:48] [Output] : ★ Lukas Ruiz counts how many complete spins it took him to remove the outer rod, counting-
  427. [2017-09-07 15:29:54] [Output] : ★ twenty-two spins. ((Lukas Ruiz))
  428. [2017-09-07 15:30:39] [Output] : ★ This counting process would be very important so the car doesn't loose too much alignement. ((Lukas Ruiz))
  429. [2017-09-07 15:31:15] [Output] : ★ Lukas Ruiz graps the first plier he used from the ground with his right sweaty palm, wrapped around-
  430. [2017-09-07 15:31:41] [Output] : ★ the dirt gloves, as he would pull a small hose clamp holding the rubber boot in place, ((Lukas Ruiz))
  431. [2017-09-07 15:31:53] [Output] : ★ mounted around the inner tie rod, which would be snapped. ((Lukas Ruiz))
  432. [2017-09-07 15:32:16] [Output] : ★ Due to being snapped, Lukas would just simply push the boot off, revealing the complete- ((Lukas Ruiz))
  433. [2017-09-07 15:32:19] [Output] : ★ inner tie rod. ((Lukas Ruiz))
  434. [2017-09-07 15:33:05] [Output] : ★ then grasps a big nut that would come packed up with the special tool he bought for the- ((Lukas Ruiz))
  435. [2017-09-07 15:33:20] [Output] : ★ rods, mounting it on the beggining of the rod, all the way into the vehicle. ((Lukas Ruiz))
  436. [2017-09-07 15:33:37] [Output] : ★ Upon mounting this correctly, Lukas would attach an extension to this nut, which would- ((Lukas Ruiz))
  437. [2017-09-07 15:33:52] [Output] : ★ all the way towards him; would be around 35 centimeters long, the extension. ((Lukas Ruiz))
  438. [2017-09-07 15:34:15] [Output] : ★ Lukas Ruiz fits the torque wrench onto the end of the extension, rotating it counter-clockwise kindly,
  439. [2017-09-07 15:34:23] [Output] : ★ as he would loosen up the rod. ((Lukas Ruiz))
  440. [2017-09-07 15:35:04] [Output] : ★ Lukas Ruiz removes the torque wrench from the extensions, as he would then rotate this one with-
  441. [2017-09-07 15:35:16] [Output] : ★ his bare hands, until the rod is completely loose and off the car. ((Lukas Ruiz))
  442. [2017-09-07 15:35:35] [Output] : ★ Lukas Ruiz stands back up, walking towards the wall, where the new parts for the car would be.
  443. [2017-09-07 15:35:54] [Output] : ★ Lukas Ruiz wraps his hands around a cardboard box where he figured the new rods would be on-
  444. [2017-09-07 15:36:03] [Output] : ★ dragging it towards his working zone. ((Lukas Ruiz))
  445. [2017-09-07 15:36:24] [Output] : ★ Lukas Ruiz rips this open, taking the left side pair of rods from it, along with some nuts they-
  446. [2017-09-07 15:36:28] [Output] : ★ would come with. ((Lukas Ruiz))
  447. [2017-09-07 15:36:47] [Output] : ★ Lukas Ruiz opens the plastic bag with the rods inside, as he would quickly compare the length of-
  448. [2017-09-07 15:37:03] [Output] : ★ the new inner tie rod, with the old broken one, while, from an eye measure- ((Lukas Ruiz))
  449. [2017-09-07 15:37:23] [Output] : ★ would be too far apart, around 2-3 millimeters, due to the new one being a factory- ((Lukas Ruiz))
  450. [2017-09-07 15:37:33] [Output] : ★ produced rod, specially made for this R8 model. ((Lukas Ruiz))
  451. [2017-09-07 15:37:52] [Output] : ★ Lukas Ruiz mounts the special nut onto the new rod, sliding it into the knuckle of the car.
  452. [2017-09-07 15:38:09] [Output] : ★ Lukas Ruiz fits in the extension and the torque wrench, as he would carefully, step by step,
  453. [2017-09-07 15:38:24] [Output] : ADVERT: I'm looking for a wrap designer. | #377887
  454. [2017-09-07 15:38:27] [Output] : ★ tight this one in with clockwise spins, until it's fully tight. ((Lukas Ruiz))
  455. [2017-09-07 15:39:23] [Output] : ★ Lukas Ruiz removes the tightening kit from the rod, laying it on the pile of tools.
  456. [2017-09-07 15:40:02] [Output] : ★ Lukas Ruiz grabs the rubber boot from the ground, the old one, which would be slightly torn-
  457. [2017-09-07 15:40:36] [Output] : ★ on one of the bellows, nothing much to worry about. ((Lukas Ruiz))
  458. [2017-09-07 15:40:55] [Output] : ★ Lukas Ruiz slides it into the inner rod, as he would grasp a zip tie from the tool box,
  459. [2017-09-07 15:41:15] [Output] : ★ tighten the rubber boot onto the beggining of the rod. ((Lukas Ruiz))
  460. [2017-09-07 15:41:46] [Output] : ★ Lukas Ruiz cuts off the excess of the zip tie with a sharp cutting plier, leaving the excess fall-
  461. [2017-09-07 15:41:51] [Output] : ★ onto the ground, leaving it there. ((Lukas Ruiz))
  462. [2017-09-07 15:42:18] [Output] : ★ Lukas Ruiz then pushes the boot a bit back, as he would fit the previously removed hsoe clamp-
  463. [2017-09-07 15:42:32] [Output] : ★ onto the close side of it, tightening it to the rod completely. ((Lukas Ruiz))
  464. [2017-09-07 15:43:04] [Output] : ★ Lukas Ruiz reaches for the new rie rod end, the outer one, as he would carefully fit it on the-
  465. [2017-09-07 15:43:14] [Output] : ★ inner tie rod, until it's threaded. ((Lukas Ruiz))
  466. [2017-09-07 15:43:29] [Output] : ★ Lukas Ruiz starts counting the 22 spins, this time clockwise to tighten it.
  467. [2017-09-07 15:43:47] [Output] : ★ As he would count these, he would align the end of the rod with the knuckle. ((Lukas Ruiz))
  468. [2017-09-07 15:44:22] [Output] : ★ Lukas Ruiz fully tightens the outer tie rod to the inner one with a nut standing on the-
  469. [2017-09-07 15:44:30] [Output] : ★ inner one, as he would lock the outer rod in place. ((Lukas Ruiz))
  470. [2017-09-07 15:44:44] [Output] : ★ Lukas Ruiz slides the other end in the knuckle, pushing it through completely, as he would grasp-
  471. [2017-09-07 15:44:48] [Output] : ★ the new castle nut. ((Lukas Ruiz))
  472. [2017-09-07 15:45:12] [Output] : ★ Lukas Ruiz slides it into the knuckle, where it would fit to the rod, grasping back the torque wrench.
  473. [2017-09-07 15:45:30] [Output] : ★ Lukas Ruiz quickly sets this one to 46, the amount of torque, fully tightening the castle nut.
  474. [2017-09-07 15:46:07] [Output] : ★ Lukas Ruiz throws his right palm on the new cutter pin, sliding it on the bottom of the castle nut,
  475. [2017-09-07 15:46:40] [Output] : ★ bending the ends of the pin around the nut, finishing with the tie rods on the left side. ((Lukas Ruiz))
  476. [2017-09-07 15:46:58] [Output] : ★ Lukas Ruiz adjusts the steering to straight, whilist grabbing the disk brake, as he would fit the-
  477. [2017-09-07 15:47:02] [Output] : ★ wheel back onto the hub. ((Lukas Ruiz))
  478. [2017-09-07 15:47:21] [Output] : ★ Lukas Ruiz grasps the 5 nuts, sending them into the wheel, as he would tighten them with his hand-
  479. [2017-09-07 15:47:26] [Output] : ★ as far in as possible. ((Lukas Ruiz))
  480. [2017-09-07 15:47:44] [Output] : ★ Lukas Ruiz then tightens them up a bit more with the torque wrench, following a star pattern.
  481. [2017-09-07 15:48:04] [Output] : ★ Lukas Ruiz to finish, Lukas would fully tighten these nuts with the torque wrench, whilist following-.
  482. [2017-09-07 15:48:14] [Output] : ★ the previously used star pattern, holding the wheel into place. ((Lukas Ruiz))
  483. [2017-09-07 15:48:33] [Output] : ★ Lukas Ruiz stands back up, walking towards the jackstand, kindly lowering the car back to the ground.
  484. [2017-09-07 15:48:51] [Output] : ★ Lukas Ruiz drags the jackstand over to the other side, under the passenger's door, setting it up-
  485. [2017-09-07 15:48:52] [Output] : ★ there. ((Lukas Ruiz))
  486. [2017-09-07 15:49:07] [Output] : ★ Lukas Ruiz pumps it up a few times, slowly raising the car again, on the other side.
  487. [2017-09-07 16:39:15] [Output] : ★ Lukas Ruiz walks towards the other side of the car, putting all the tolls in the carboard box where-
  488. [2017-09-07 16:39:30] [Output] : ★ the rods would have been packed, dragging everything to the other side of the R8. ((Lukas Ruiz))
  489. [2017-09-07 16:39:50] [Output] : ★ Lukas Ruiz grasps the torque wrench from inside the box, mounting it on one nut on the wheel.
  490. [2017-09-07 16:41:28] [Output] : ★ Lukas Ruiz twists it counter-clockwise, loosening the nut from the wheel.
  491. [2017-09-07 16:41:44] [Output] : ★ Lukas Ruiz keeps it on the ground by his left, aswell as the rest of the nuts he would remove-
  492. [2017-09-07 16:41:48] [Output] : ★ from the wheel afterwards. ((Lukas Ruiz))
  493. [2017-09-07 16:42:01] [Output] : ★ As all the nuts would be out, he would take off the wheel with both hands, leaning it- ((Lukas Ruiz))
  494. [2017-09-07 16:42:11] [Output] : ★ to the frame of the car, on his right side, where the fender would sit. ((Lukas Ruiz))
  495. [2017-09-07 16:42:36] [Output] : ★ Lukas Ruiz rotates the brake disk to himself, as if he was turning the steering wheel clockwise,
  496. [2017-09-07 16:42:42] [Output] : ★ so he has better access to the rods. ((Lukas Ruiz))
  497. [2017-09-07 16:43:02] [Output] : ★ You would now see the broken broken, very similar to the ones on the other side, before- ((Lukas Ruiz))
  498. [2017-09-07 16:43:05] [Output] : ★ they were replaced. ((Lukas Ruiz))
  499. [2017-09-07 16:43:23] [Output] : ★ Lukas Ruiz grasps the plier from the box, pushing off the pin on the bottom of the outer rod.
  500. [2017-09-07 16:43:44] [Output] : ★ With the 19mm, Lukas would remove the castle nut, storing it next to the wheel's nuts. ((Lukas Ruiz))
  501. [2017-09-07 16:44:00] [Output] : ★ Lukas Ruiz inserts the rod removing tool on the top of the outer rod, hitting it from the bottom-
  502. [2017-09-07 16:44:11] [Output] : ★ with a rubber protected hammer, popping it out. ((Lukas Ruiz))
  503. [2017-09-07 16:44:30] [Output] : ★ As Lukas would hit it, you would see some debris jumping off of it and the inner rod also, ((Lukas Ruiz))
  504. [2017-09-07 16:44:44] [Output] : ★ that would be on the zones where the rods would be snapped. ((Lukas Ruiz))
  505. [2017-09-07 16:45:01] [Output] : ★ Lukas Ruiz pushes the outer rod to himself, when fully loose, as he would grab back the 19mm,
  506. [2017-09-07 16:45:07] [Output] : ★ untightening the nut on the inner rod. ((Lukas Ruiz))
  507. [2017-09-07 16:45:26] [Output] : ★ Lukas Ruiz rotates the outer rod counter-clockwise, counting the same 22 spins, memorizing them.
  508. [2017-09-07 16:45:49] [Output] : ★ Lukas Ruiz throws the two pieces of the broken outer rod away, focusing on the rest of the inner-
  509. [2017-09-07 16:46:05] [Output] : ★ rod there was, roughly 13 centimers, enough to cover the rubber boot. ((Lukas Ruiz))
  510. [2017-09-07 16:46:24] [Output] : ★ Lukas Ruiz would then start working on this one, as he would remove the hose clamp on it's end-
  511. [2017-09-07 16:46:30] [Output] : ★ with the sharpen plier. ((Lukas Ruiz))
  512. [2017-09-07 16:47:04] [Output] : ★ Lukas Ruiz slowly pushes the rubber boot off, storing it in a safe place, as it was going to be-
  513. [2017-09-07 16:47:07] [Output] : ★ re-used. ((Lukas Ruiz))
  514. [2017-09-07 16:47:29] [Output] : ★ Lukas Ruiz then grasps back the big nut used to remove the rod, mounting it on the beggining of the-
  515. [2017-09-07 16:47:45] [Output] : ★ rod, where the small bearing would be. ((Lukas Ruiz))
  516. [2017-09-07 16:48:08] [Output] : ★ Lukas Ruiz quickly mounts the extension and the torque wrench on the end of it, twisting the rod-
  517. [2017-09-07 16:48:29] [Output] : ★ counter-clockwise with some effort, as the greasent would be near to null, making it- ((Lukas Ruiz))
  518. [2017-09-07 16:48:33] [Output] : ★ hard to move. ((Lukas Ruiz))
  519. [2017-09-07 16:48:47] [Output] : ★ As he would finally break it loose, he would push it off, throwing it away, where he had- ((Lukas Ruiz))
  520. [2017-09-07 16:48:54] [Output] : ★ put the broken outer rod. ((Lukas Ruiz))
  521. [2017-09-07 16:49:17] [Output] : ★ With the pair of rods out, Lukas would grasp back to the brand new ones, quickly- ((Lukas Ruiz))
  522. [2017-09-07 16:49:20] [Output] : ★ inspecting them. ((Lukas Ruiz))
  523. [2017-09-07 16:49:42] [Output] : ★ Lukas Ruiz drops the outer one infront of him, to be used afterwards, as he would keep the inner-
  524. [2017-09-07 16:49:46] [Output] : ★ one in his left hand. ((Lukas Ruiz))
  525. [2017-09-07 16:50:04] [Output] : ★ With his right one, he would mount the nut, extensions and torque wrench at once. ((Lukas Ruiz))
  526. [2017-09-07 16:50:30] [Output] : ★ Lukas Ruiz mounts the rod onto the steering knuckle, fully tightening it clockwise, not applying too-
  527. [2017-09-07 16:50:50] [Output] : ★ much strength, risking to damage it or provoking a clearence. ((Lukas Ruiz))
  528. [2017-09-07 16:51:27] [Output] : ★ Lukas Ruiz grabs the rubber boot back, mounting another zip tie on the inner side of the it, upon-
  529. [2017-09-07 16:51:35] [Output] : ★ sliding it on the rod. ((Lukas Ruiz))
  530. [2017-09-07 16:51:56] [Output] : ★ Lukas Ruiz fully tightens the zip tie, cutting off the excess with the sharp cutting plier on the box.
  531. [2017-09-07 16:52:14] [Output] : ★ Lukas Ruiz pulls it a bit back, fitting it on the rod, as he would finish it off with a hose clamp on-
  532. [2017-09-07 16:52:20] [Output] : ★ the loose end, tightening it in place. ((Lukas Ruiz))
  533. [2017-09-07 16:52:40] [Output] : ★ Lukas Ruiz tightens the small nut on the end of the inner rod a bit back, so he can fit the outer rod.
  534. [2017-09-07 16:53:09] [Output] : ★ Lukas Ruiz grabs the silver outer rod, looking new and shiny, sliding it onto the inner one.
  535. [2017-09-07 16:53:30] [Output] : ★ aligns it until it's ready to tighten, as he would start counting slow twists, following a- ((Lukas Ruiz))
  536. [2017-09-07 16:53:36] [Output] : ★ clockwise pattern, counting 22 of these. ((Lukas Ruiz))
  537. [2017-09-07 16:53:59] [Output] : ★ Lukas Ruiz sets it to as less angle as he could, exactly facing downwards, as he would-
  538. [2017-09-07 16:54:13] [Output] : ★ grasp the wheel knuckle, guiding it to under the rod. ((Lukas Ruiz))
  539. [2017-09-07 16:54:27] [Output] : ★ Lukas Ruiz slides it in, as he would secure it with the castle nut he had previously put apart.
  540. [2017-09-07 16:54:42] [Output] : ★ Lukas Ruiz fully tightens this one with a wrench, completely securing it.
  541. [2017-09-07 16:54:57] [Output] : ★ Lukas Ruiz sets the disk brake moreless aligned, as he would then mount on the wheel.
  542. [2017-09-07 16:55:14] [Output] : ★ Lukas Ruiz extends both hands towards the rim, lifting it up with effort and wiggling it onto the hub.
  543. [2017-09-07 16:55:31] [Output] : ★ Lukas Ruiz slides in the 5 nuts, tightening them a bit with his hands, just so the wheel doesn't slide-
  544. [2017-09-07 16:55:32] [Output] : ★ off. ((Lukas Ruiz))
  545. [2017-09-07 16:55:48] [Output] : ★ Lukas Ruiz then gradually tightens all of them with the torque wrench, according to the factory-
  546. [2017-09-07 16:56:10] [Output] : ★ provided torque, always following a star pattern so that the wheel doesn't wobble- ((Lukas Ruiz))
  547. [2017-09-07 16:56:13] [Output] : ★ around when moving. ((Lukas Ruiz))
  548. [2017-09-07 16:56:36] [Output] : ★ At this time, all the mechanical issues with the car would be fixes, missing only to- ((Lukas Ruiz))
  549. [2017-09-07 16:57:00] [Output] : ★ mount the new body kit, including the front bumper, grill, fenders and hood. ((Lukas Ruiz))
  550. [2017-09-07 16:57:28] [Output] : ★ - and to fit in the new steering wheel, at the same time as the airbags would be removed. ((Lukas Ruiz))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!