Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Normal zone: 16384 pages, LIFO batch:3
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- Kernel command line: console=ttyS0,115200n8r init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw isp_flag=0x0
- PID hash table entries: 256 (order: -2, 1024 bytes)
- Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Memory: 40592K/65536K available (2155K kernel code, 234K rwdata, 1032K rodata, 84K init, 146K bss, 24944K reserved)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
- vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
- lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
- modules : 0xbf800000 - 0xc0000000 ( 8 MB)
- .text : 0xc0008000 - 0xc0324ecc (3188 kB)
- .init : 0xc0325000 - 0xc033a000 ( 84 kB)
- .data : 0xc033a000 - 0xc03749e0 ( 235 kB)
- .bss : 0xc03749e0 - 0xc0399578 ( 147 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Preemptible hierarchical RCU implementation.
- Dump stacks of tasks blocking RCU-preempt GP.
- NR_IRQS:16 nr_irqs:16 16
- Find CLK_cpupll_clk, hook ms_cpuclk_ops
- [ms_cpuclk_init] get dvfs gpio vid_1
- Architected cp15 timer(s) running at 6.00MHz (virt).
- sched_clock: 56 bits at 6MHz, resolution 166ns, wraps every 2863311527936ns
- Switching to timer-based delay loop, resolution 166ns
- console [ttyS0] enabled
- Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=20000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0x20204d48 - 0x20204d78
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- Version : MVX2##I3g60b5603KL_LX318####[BR:gI3/sz1109]#XVM
- GPIO: probe end[OTG] Mstar_otg_device_init
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- MSYS: INIT DONE. TICK=0x050CA79C
- Advanced Linux Sound Architecture Driver Initialized.
- Switched to clocksource arch_sys_counter
- cfg80211: Calling CRDA to update world regulatory domain
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- TCP bind hash table entries: 1024 (order: 2, 20480 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 12288 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- NET: Registered protocol family 1
- futex hash table entries: 256 (order: 0, 7168 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
- msgmni has been set to 119
- io scheduler noop registered
- io scheduler deadline registered (default)
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Mstar_ehc_init version:20150512
- Mstar-ehci-2 H.W init
- Titania3_series_start_ehc start
- enable USB function
- [USB] config miu select [1] [ef] [ef] ][ef]
- [USB] enable miu lower bound address subtraction
- [USB] worring.... no platform_data
- hcd->rsrc_start:0xfd286400
- BC disable
- [USB] soc:Mstar-ehci-2 irq --> 119
- soc:Mstar-ehci-2 soc:Mstar-ehci-2: EHCI Host Controller
- soc:Mstar-ehci-2 soc:Mstar-ehci-2: new USB bus registered, assigned bus number 1
- soc:Mstar-ehci-2 soc:Mstar-ehci-2: irq 119, io mem 0xfd286400
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.18.30 ehci_hcd
- usb usb1: SerialNumber: mstar
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- Mstar-ehci-1 H.W init
- CHIP_FUNCTION SET. ID=4, param=1
- Can't get power-enable-pad from DTS, set default GPIO(1)
- [mstar_usb_vbus_control] Enable USB VBUS GPIO(81)
- Titania3_series_start_ehc start
- enable USB function
- [USB] config miu select [1] [ef] [ef] ][ef]
- [USB] enable miu lower bound address subtraction
- [USB] worring.... no platform_data
- hcd->rsrc_start:0xfd284800
- BC disable
- [USB] soc:Mstar-ehci-1 irq --> 95
- soc:Mstar-ehci-1 soc:Mstar-ehci-1: EHCI Host Controller
- soc:Mstar-ehci-1 soc:Mstar-ehci-1: new USB bus registered, assigned bus number 2
- soc:Mstar-ehci-1 soc:Mstar-ehci-1: irq 95, io mem 0xfd284800
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 3.18.30 ehci_hcd
- usb usb2: SerialNumber: mstar
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- i2c /dev entries driver
- logger: created 256K log 'log_main'
- [ms_uart_probe] uart port 0 use MUX_PM_UART
- 1f221000.uart0: ttyS0 at MMIO 0x0 (irq = 98, base_baud = 10750000) is a unknown
- [ms_uart_probe] uart port 1 use MUX_UART1
- 1f221200.uart1: ttyS1 at MMIO 0x0 (irq = 99, base_baud = 10750000) is a unknown
- >> [sdmmc] ms_sdmmc Driver Initializing...
- >> [sdmmc] ms_sdmmc_probe
- >> [sdmmc_0] Int CDZ use Ext GPIO IRQ: (151)
- >> [sdmmc_0] Get CD => (1)
- >> [sdmmc_0] Probe Platform Devices...(Ret:0)
- infinity-audio soc:sound: ASoC: CODEC DAI infinity-codec-dai-main not registered
- platform soc:sound: Driver infinity-audio requests probe deferral
- infinity-audio infinity-codec: ASoC: CODEC DAI infinity-codec-dai-main not registered
- platform infinity-codec: Driver infinity-audio requests probe deferral
- netif_napi_add() called with weight 128 on device eth%d
- MSYS: DMEM request: [EMAC_BUFF]:0x00002000
- ==20150512==> hub_port_init 1 #0
- Plug in USB Port1
- [EMAC]Init EMAC success! (add delay in reset)
- [HVSP]u32Dropmode on/n
- [VIP]gu32CMDQmode off/n<3>MSYS: DMEM request: [VIP_CMDQ]:0x00004000
- [SCL] SCL init success
- mload_size = 35040
- mload_virt_addr = c2c50000
- mload_dma_addr = 0x22c50000
- >> [sdmmc_0] Set IOS => Clk=48000000 (Real=48000000)
- MSYS: DMEM request: [ISP_base]:0x0001B120
- mmc0: new high speed SDHC card at address 1234
- ShareData_Meminfo phyaddr:0x224ab740, viraddr:0xc24ab740, len:0x38
- mmcblk0: mmc0:1234 SA16G 14.4 GiB
- AE Base: virt=0xC2C60000 size=0xB400
- mmcblk0: p1
- AWB Base: virt=0xC2C6B400 size=0x8700
- AF Base: virt=0xC2C73B00 size=0xF0
- HISTO Base: virt=0xC2C73BF0 size=0x2F0
- MOT Base: virt=0xC2C73EE0 size=0x6E40
- RGBIR Base: virt=0xC2C7AD20 size=0x400
- [ISP] register driver success
- [CSI] register driver success[SAR] infinity_sar_probe
- [JPE, JpeProbe] set base=0xfd264000 irq=93, nClockRate=288000000
- MSYS: DMEM request: [BDMA_FSP_WBUFF]:0x00000100
- [Ser flash] phys=0x22c49000, virt=0xc2c49000, bus=0x02c49000
- [FSP] Flash is detected (0x0709, 0xEF, 0x40, 0x18) ver1.1
- [FSP] 1-2-2 2xIO_READ MODE
- mtd .name = NOR_FLASH, .size = 0x01000000 (16MiB)
- .erasesize = 0x00010000 .numeraseregions = 0
- MXP_PARTS!!
- usb 2-1: new high-speed USB device number 2 using soc:Mstar-ehci-1
- MXP found at mxp_offset[1]=0x00020000, size=0x1000
- Creating 6 MTD partitions on "NOR_FLASH":
- 0x000000000000-0x000000050000 : "BOOT"
- 0x000000050000-0x000000260000 : "KERNEL"
- 0x000000260000-0x0000009b0000 : "ROOTFS"
- 0x0000009b0000-0x000000fe0000 : "DATA"
- 0x000000fe0000-0x000000ff0000 : "CONFIG"
- 0x000000ff0000-0x000001000000 : "FACTORY"
- MSYS: DMEM request: [AESDMA_ENG]:0x00001000
- infinity_sha_create 372
- MSYS: DMEM request: [AESDMA_ENG1]:0x00001000
- infinity_aes soc:aesdma: MSTAR AES engine enabled.
- cryptodev: driver aesdmadev loaded.
- [ms_cpufreq_init] cpu current clk=796917760
- ms_pwm->pad_ctrl[0]=16
- ms_pwm->pad_ctrl[1]=70
- ms_pwm->pad_ctrl[2]=255
- ms_pwm->pad_ctrl[3]=255
- ms_pwm->pad_ctrl[4]=53
- ms_pwm->pad_ctrl[5]=255
- ms_pwm->pad_ctrl[6]=255
- ms_pwm->pad_ctrl[7]=56
- mstar-i3pwm 1f003400.pwm: probe successful
- mstar notify driver install successfully
- TCP: cubic registered
- NET: Registered protocol family 17
- ThumbEE CPU extension supported.
- MSYS: DMEM request: [pcmC0D0p]:0x00018000
- MSYS: DMEM request: [pcmC0D0c]:0x00014000
- infinity-audio soc:sound: infinity-codec-dai-main <-> infinity-cpu-dai mapping ok
- ALSA device list:
- #0: infinity_snd_machine
- VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- devtmpfs: mounted
- Freeing unused kernel memory: 84K (c0325000 - c033a000)
- usb 2-1: New USB device found, idVendor=148f, idProduct=7601
- usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- devpts: called with bogus options
- random: property_servic urandom read with 1 bits of entropy available
- init: property_service started...
- init: minit[MVX2####g348e306CM_MINIT#####XVM]
- MSYS: DMEM request: [VENC-49]:0x0001E000
- MSYS: DMEM request: [VENC-48]:0x0001E000
- MSYS: DMEM request: [VENC-32]:0x000CC000
- MSYS: DMEM request: [S1:VENCDMP1]:0x00069AE0
- MSYS: DMEM request: [S1:VENCDMP0]:0x00069AE0
- MSYS: DMEM request: [S1:VENCDMOUT]:0x0000A100
- MSYS: DMEM request: [S0:VENCDMP1]:0x0007F800
- MSYS: DMEM request: [S0:VENCDMP0]:0x0007F800
- MSYS: DMEM request: [S0:VENCDMOUT]:0x0000A800
- MSYS: DMEM request: [VSPL-I0P3B0]:0x00016800
- MSYS: DMEM request: [VSPL-I0P2B1]:0x0005A000
- MSYS: DMEM request: [VSPL-I0P2B0]:0x0005A000
- MSYS: DMEM request: [VSPL-I0P1B1]:0x0005A000
- MSYS: DMEM request: [VSPL-I0P1B0]:0x0005A000
- MSYS: DMEM request: [VSPL-I0P0B1]:0x0005A000
- MSYS: DMEM request: [VSPL-I0P0B0]:0x0005A000
- MSYS: DMEM request: [MS-01]:0x00357000
- MSYS: DMEM request: [MS-00]:0x00357000
- MSYS: DMEM request: [SCL_MCNR_M]:0x000FF000
- MSYS: DMEM request: [SCL_MCNR_YC]:0x003FC000
- MSYS: fix_dmem enabled
- [FB]Set 68
- [DRVHVSP]Drv_HVSP_SetFbManageConfig(645):8000
- DNRR OFF
- [FB]Set 57
- [DRVHVSP]Drv_HVSP_SetFbManageConfig(645):100
- UNLOCK
- mtprealloc: module license 'unspecified' taints kernel.
- Disabling lock debugging due to kernel taint
- ==>[0]:PreBuff:0xc2058000, DmaAddr:0x22058000
- ==>[1]:PreBuff:0xc2068000, DmaAddr:0x22068000
- ==>[2]:PreBuff:0xc2078000, DmaAddr:0x22078000
- ==>[3]:PreBuff:0xc207c000, DmaAddr:0x2207c000
- ==>[4]:PreBuff:0xc2080000, DmaAddr:0x22080000
- ==>[5]:PreBuff:0xc2084000, DmaAddr:0x22084000
- ==>[6]:PreBuff:0xc2088000, DmaAddr:0x22088000
- ==>[7]:PreBuff:0xc208c000, DmaAddr:0x2208c000
- ==>[8]:PreBuff:0xc2090000, DmaAddr:0x22090000
- ==>[9]:PreBuff:0xc2094000, DmaAddr:0x22094000
- ==>[10]:PreBuff:0xc2098000, DmaAddr:0x22098000
- ==>[11]:PreBuff:0xc209c000, DmaAddr:0x2209c000
- ==>[12]:PreBuff:0xc20a0000, DmaAddr:0x220a0000
- ==>[13]:PreBuff:0xc20a4000, DmaAddr:0x220a4000
- ==>[14]:PreBuff:0xc20a8000, DmaAddr:0x220a8000
- ==>[15]:PreBuff:0xc20ac000, DmaAddr:0x220ac000
- ==>[16]:PreBuff:0xc20b0000, DmaAddr:0x220b0000
- ==>[17]:PreBuff:0xc20b4000, DmaAddr:0x220b4000
- ==>[18]:PreBuff:0xc20b8000, DmaAddr:0x220b8000
- ==>[19]:PreBuff:0xc20bc000, DmaAddr:0x220bc000
- ==>[20]:PreBuff:0xc20c0000, DmaAddr:0x220c0000
- ==>[21]:PreBuff:0xc20c4000, DmaAddr:0x220c4000
- ==>[22]:PreBuff:0xc20c8000, DmaAddr:0x220c8000
- ==>[23]:PreBuff:0xc20cc000, DmaAddr:0x220cc000
- ==>[24]:PreBuff:0xc20d0000, DmaAddr:0x220d0000
- ==>[25]:PreBuff:0xc25da000, DmaAddr:0x225da000
- ==>[26]:PreBuff:0xc25d8000, DmaAddr:0x225d8000
- ==>[27]:PreBuff:0xc20d8000, DmaAddr:0x220d8000
- ==>[28]:PreBuff:0xc20e0000, DmaAddr:0x220e0000
- ==>[29]:PreBuff:0xc20e8000, DmaAddr:0x220e8000
- ==>[30]:PreBuff:0xc20f0000, DmaAddr:0x220f0000
- ==>[31]:PreBuff:0xc20f8000, DmaAddr:0x220f8000
- ==>[32]:PreBuff:0xc2100000, DmaAddr:0x22100000
- ==>[33]:PreBuff:0xc2108000, DmaAddr:0x22108000
- ==>[34]:PreBuff:0xc2110000, DmaAddr:0x22110000
- ==>[35]:PreBuff:0xc2002800, DmaAddr:0x22002800
- install prealloc ok
- rtusb init rt2870 --->
- === pAd = c4a5b000, size = 1584896 ===
- allocate tx ringidx 0
- RTMPQMemAddr[0]
- allocate tx ringidx 1
- RTMPQMemAddr[1]
- allocate tx ringidx 2
- RTMPQMemAddr[2]
- allocate tx ringidx 3
- RTMPQMemAddr[3]
- allocate tx ringidx 4
- RTMPQMemAddr[4]
- allocate tx ringidx 0
- RTMPQMemAddr[5]
- allocate tx ringidx 1
- RTMPQMemAddr[6]
- allocate tx ringidx 2
- RTMPQMemAddr[7]
- allocate tx ringidx 3
- RTMPQMemAddr[8]
- allocate tx ringidx 4
- RTMPQMemAddr[9]
- allocate tx ringidx 0
- RTMPQMemAddr[10]
- allocate tx ringidx 1
- RTMPQMemAddr[11]
- allocate tx ringidx 2
- RTMPQMemAddr[12]
- allocate tx ringidx 3
- RTMPQMemAddr[13]
- allocate tx ringidx 4
- RTMPQMemAddr[14]
- allocate tx ringidx 0
- RTMPQMemAddr[15]
- allocate tx ringidx 1
- RTMPQMemAddr[16]
- allocate tx ringidx 2
- RTMPQMemAddr[17]
- allocate tx ringidx 3
- RTMPQMemAddr[18]
- allocate tx ringidx 4
- RTMPQMemAddr[19]
- RTMPQMemAddr[25]
- RTMPQMemAddr[26]
- RTMPQMemAddr[27]
- RTMPQMemAddr[28]
- RTMPQMemAddr[29]
- RTMPQMemAddr[30]
- RTMPQMemAddr[31]
- RTMPQMemAddr[32]
- RTMPQMemAddr[33]
- RTMPQMemAddr[34]
- RTMPQMemAddr[35]
- RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8
- RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4
- RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5
- RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6
- RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7
- RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9
- STA Driver version-JEDI.MP1.mt7601u.v1.5.1_20171211_i3_ATE
- Compile time-Jun 6 2018,15:01:49
- ==>WaitForAsicReady MAC_CSR0=0x76010500
- ==>WaitForAsicReady MAC_CSR0=0x76010500
- NVM is EFUSE
- Endpoint(8) is for In-band Command
- Endpoint(4) is for WMM0 AC0
- Endpoint(5) is for WMM0 AC1
- Endpoint(6) is for WMM0 AC2
- Endpoint(7) is for WMM0 AC3
- Endpoint(9) is for WMM1 AC0
- Endpoint(84) is for Data-In
- Endpoint(85) is for Command Rsp
- 80211> RFICType = 3
- NumOfChan ===> 58
- 80211> Number of channel = 0x44
- 80211> Number of rate = 12
- 80211> CurTxPower = 0 dBm
- 80211> TxStream = 0
- crda> requlation requestion by core: 00
- 80211> CFG80211_Register
- usbcore: registered new interface driver rt2870
- [Mstar GPIO] gpio(98) to irq(152)
- [Mstar GPIO] gpio(99) to irq(153)
- [Mstar GPIO] gpio(100) to irq(154)
- [PWN] mstar_pwm_config duty_ns=0, period_ns=120000
- reg=0x1F003410 clk=12000000, period=0x64
- reg=0x1F003408 clk=12000000, u32Duty=0x0
- [gpio] Set PAD_SR_IO12 as GPIO(controlled by ISP bank)
- [Mstar GPIO] gpio(36) to irq(-1)
- FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- ================> UP : RTMP_SEM_EVENT_WAIT(STA)
- 1. LDO_CTR0(6c) = a64799, PMU_OCLEVEL c
- 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
- ==>WaitForAsicReady MAC_CSR0=0x76010500
- FW Version:0.1.00 Build:7640
- Build Time:201301040941____
- ILM Length = 44276(bytes)
- DLM Length = 0(bytes)
- Loading FW....
- [Mstar GPIO] gpio(18) to irq(-1)
- [Mstar GPIO] gpio(83) to irq(166)
- [Mstar GPIO] gpio(78) to irq(182)
- ########DBG(Change PMU LEVEL)
- RTMP_TimerListAdd: add timer obj c4b83ce4!
- RTMP_TimerListAdd: add timer obj c4b83d14!
- RTMP_TimerListAdd: add timer obj c4b83d44!
- RTMP_TimerListAdd: add timer obj c4b83cb4!
- RTMP_TimerListAdd: add timer obj c4b83c24!
- RTMP_TimerListAdd: add timer obj c4b83c54!
- RTMP_TimerListAdd: add timer obj c4b1825c!
- RTMP_TimerListAdd: add timer obj c4b04ad0!
- RTMP_TimerListAdd: add timer obj c4b04b04!
- RTMP_TimerListAdd: add timer obj c4b182fc!
- RTMP_TimerListAdd: add timer obj c4b07480!
- RTMP_TimerListAdd: add timer obj c4b06cc0!
- RTMP_TimerListAdd: add timer obj c4b0744c!
- RTMP_TimerListAdd: add timer obj c4b077ac!
- RTMP_TimerListAdd: add timer obj c4b074b4!
- RTMP_TimerListAdd: add timer obj c4b074e8!
- RTMP_TimerListAdd: add timer obj c4b0751c!
- RTMP_TimerListAdd: add timer obj c4a5f7fc!
- RTMP_TimerListAdd: add timer obj c4a5f03c!
- RTMP_TimerListAdd: add timer obj c4a5f7c8!
- RTMP_TimerListAdd: add timer obj c4a5fb28!
- RTMP_TimerListAdd: add timer obj c4a5fa4c!
- RTMP_TimerListAdd: add timer obj c4a96b74!
- RTMP_TimerListAdd: add timer obj c4a963b4!
- RTMP_TimerListAdd: add timer obj c4a96b40!
- RTMP_TimerListAdd: add timer obj c4a96ea0!
- RTMP_TimerListAdd: add timer obj c4a96ba8!
- RTMP_TimerListAdd: add timer obj c4a96bdc!
- RTMP_TimerListAdd: add timer obj c4a96c10!
- RTMP_TimerListAdd: add timer obj c4b181fc!
- RTMP_TimerListAdd: add timer obj c4b182cc!
- RTMP_TimerListAdd: add timer obj c4bdbb90!
- RTMP_TimerListAdd: add timer obj c4bdbbc0!
- RTMP_TimerListAdd: add timer obj c4bdbbf0!
- RTMP_TimerListAdd: add timer obj c4bdbc20!
- RTMP_TimerListAdd: add timer obj c4bdbc50!
- RTMP_TimerListAdd: add timer obj c4bdbc84!
- RTMP_TimerListAdd: add timer obj c4b83c84!
- RTMP_TimerListAdd: add timer obj c4b03aec!
- RTMP_TimerListAdd: add timer obj c4b03abc!
- RTMP_TimerListAdd: add timer obj c4b03a8c!
- RTMP_TimerListAdd: add timer obj c4b1822c!
- P2pGroupTabInit .
- P2pScanChannelDefault <=== count = 3, Channels are 1, 6,11 separately
- P2pCfgInit::
- ==>WaitForAsicReady MAC_CSR0=0x76010500
- cfg_mode=9
- cfg_mode=9
- wmode_band_equal(): Band Equal!
- Key1Str is Invalid key length(0) or Type(0)
- Key2Str is Invalid key length(0) or Type(0)
- Key3Str is Invalid key length(0) or Type(0)
- Key4Str is Invalid key length(0) or Type(0)
- ###### Force at HT20 (BW_20) mode !!! ########
- 1. Phy Mode = 14
- 2. Phy Mode = 14
- NVM is Efuse and its size =1d[1e0-1fc]
- ERROR!!! MT7601 E2PROM: WRONG VERSION 0xd, should be 9
- 3. Phy Mode = 14
- AntCfgInit: primary/secondary ant 0/1
- ---> InitFrequencyCalibration
- InitFrequencyCalibrationMode:Unknow mode = 3
- InitFrequencyCalibration: frequency offset in the EEPROM = 110(0x6e)
- RTMPSetPhyMode: channel is out of range, use first channel=1
- MCS Set = ff 00 00 00 01
- 80211> re-init bands...
- 80211> RFICType = 1
- NumOfChan ===> 14
- 80211> Number of channel = 0x44
- 80211> Number of rate = 12
- 80211> CurTxPower = 0 dBm
- 80211> TxStream = 1
- 0x1300 = 00064300
- RTMPDrvOpen(1):Check if PDMA is idle!
- RTMPDrvOpen(2):Check if PDMA is idle!
- MSYS: DMEM request: [ISP_MLOAD]:0x000088E0
- 80211> CFG80211_OpsPmksaFlush ==>
- MT7601_ChipSwitchChannel: SwitchChannel#1(RF=15, 1T)
- MSYS: DMEM request: [DLC_MEM]:0x00000400
- [DRVSCLDMA] Double Buffer Status :0
- MT7601_ChipSwitchChannel: SwitchChannel#2(RF=15, 1T)
- [HVSP1] Size must be align 16, Vsize=1080, Pitch=1920
- [HVSP1] Buffer is single, Vsize=1080, Pitch=1920
- MSYS: DMEM request: [SCL_MCNR_YC]:0x003FC000
- MSYS: DMEM kept entry found: name=SCL_MCNR_YC, phys=0x239F0000, length=0x003FC000
- MSYS: DMEM request: [SCL_MCNR_M]:0x000FF000
- MSYS: DMEM kept entry found: name=SCL_MCNR_M, phys=0x238F0000, length=0x000FF000
- [HVSP1]: MCNR YC: Phy:239f0000 Vir:c39f0000
- [HVSP1]: MCNR CIIR: Phy:0 Vir:0
- [HVSP1]: MCNR M: Phy:238f0000 Vir:c38f0000
- MSYS: DMEM request: [VSPL-I0P0B0]:0x0005A000
- MSYS: DMEM kept entry found: name=VSPL-I0P0B0, phys=0x231D0000, length=0x0005A000
- MSYS: DMEM request: [VSPL-I0P0B1]:0x0005A000
- MSYS: DMEM kept entry found: name=VSPL-I0P0B1, phys=0x23170000, length=0x0005A000
- H2BR@v0.0.00:vsi rq-controller
- MT7601_ChipSwitchChannel: SwitchChannel#3(RF=15, 1T)
- MSYS: DMEM request: [MS-00]:0x00357000
- MSYS: DMEM kept entry found: name=MS-00, phys=0x23590000, length=0x00357000
- MSYS: DMEM request: [MS-01]:0x00357000
- MSYS: DMEM kept entry found: name=MS-01, phys=0x23230000, length=0x00357000
- MSYS: DMEM request: [VENC-32]:0x000CC000
- hrqc_set_conf - skip set RQCT_CFG_SEQ
- MSYS: DMEM kept entry found: name=VENC-32, phys=0x22D00000, length=0x000CC000
- vhe-skip set RQCT_CFG_FPS(30720/1024)
- hrqc_set_conf - skip set RQCT_CFG_SEQ
- MSYS: DMEM request: [S0:VENCDMOUT]:0x0000A800
- MSYS: DMEM kept entry found: name=S0:VENCDMOUT, phys=0x22FC0000, length=0x0000A800
- MSYS: DMEM request: [S0:VENCDMP0]:0x0007F800
- MSYS: DMEM kept entry found: name=S0:VENCDMP0, phys=0x22F40000, length=0x0007F800
- MSYS: DMEM request: [S0:VENCDMP1]:0x0007F800
- MSYS: DMEM kept entry found: name=S0:VENCDMP1, phys=0x22EC0000, length=0x0007F800
- H2BR@v0.0.00:vsi rq-controller
- MSYS: DMEM request: [VSPL-I0P1B0]:0x0005A000
- MSYS: DMEM kept entry found: name=VSPL-I0P1B0, phys=0x23110000, length=0x0005A000
- MSYS: DMEM request: [VSPL-I0P1B1]:0x0005A000
- MT7601_ChipSwitchChannel: SwitchChannel#4(RF=15, 1T)
- MSYS: DMEM kept entry found: name=VSPL-I0P1B1, phys=0x230B0000, length=0x0005A000
- MSYS: DMEM request: [VENC-48]:0x0001E000
- hrqc_set_conf - skip set RQCT_CFG_SEQ
- vhe-skip set RQCT_CFG_FPS(30720/1024)
- MSYS: DMEM kept entry found: name=VENC-48, phys=0x22CE0000, length=0x0001E000
- hrqc_set_conf - skip set RQCT_CFG_SEQ
- MSYS: DMEM request: [S1:VENCDMOUT]:0x0000A100
- MSYS: DMEM kept entry found: name=S1:VENCDMOUT, phys=0x22EB0000, length=0x0000A100
- MSYS: DMEM request: [S1:VENCDMP0]:0x00069F00
- MSYS: dmem realloc S1:VENCDMP0
- MSYS: DMEM [S1:VENCDMP0]@0x22E40000 successfully released
- vhe-return buffer is null
- MSYS: DMEM request: [S1:VENCDMP1]:0x00069F00
- MSYS: dmem realloc S1:VENCDMP1
- MSYS: DMEM [S1:VENCDMP1]@0x22DD0000 successfully released
- MSYS: DMEM request: [VSPL-I0P2B0]:0x0005A000
- MSYS: DMEM kept entry found: name=VSPL-I0P2B0, phys=0x23050000, length=0x0005A000
- MSYS: DMEM request: [VSPL-I0P2B1]:0x0005A000
- MSYS: DMEM kept entry found: name=VSPL-I0P2B1, phys=0x22FF0000, length=0x0005A000
- MSYS: DMEM request: [VENC-49]:0x0001E000
- MSYS: DMEM kept entry found: name=VENC-49, phys=0x22CC0000, length=0x0001E000
- MT7601_ChipSwitchChannel: SwitchChannel#5(RF=15, 1T)
- MSYS: DMEM request: [VSPL-I0P3B0]:0x00016800
- MSYS: DMEM kept entry found: name=VSPL-I0P3B0, phys=0x22FD0000, length=0x00016800
- vhe-return buffer is null
- MT7601_ChipSwitchChannel: SwitchChannel#6(RF=15, 1T)
- [Mstar GPIO] gpio(17) to irq(-1)
- MSYS: DMEM request: [VSPL-I0P3B0]:0x00016800
- MSYS: DMEM kept entry found: name=VSPL-I0P3B0, phys=0x22FD0000, length=0x00016800
- MT7601_ChipSwitchChannel: SwitchChannel#7(RF=15, 1T)
- MT7601_ChipSwitchChannel: SwitchChannel#8(RF=15, 1T)
- MT7601_ChipSwitchChannel: SwitchChannel#9(RF=15, 1T)
- MT7601_ChipSwitchChannel: SwitchChannel#10(RF=15, 1T)
- [PWN] mstar_pwm_config duty_ns=0, period_ns=120000
- reg=0x1F003410 clk=12000000, period=0x64
- reg=0x1F003408 clk=12000000, u32Duty=0x0
- [PWN] mstar_pwm_config duty_ns=0, period_ns=120000
- reg=0x1F003410 clk=12000000, period=0x64
- reg=0x1F003408 clk=12000000, u32Duty=0x0
- MT7601_ChipSwitchChannel: SwitchChannel#11(RF=15, 1T)
- MT7601_ChipSwitchChannel: SwitchChannel#12(RF=15, 1T)
- MT7601_ChipSwitchChannel: SwitchChannel#13(RF=15, 1T)
- MT7601_ChipSwitchChannel: SwitchChannel#1(RF=15, 1T)
- 80211> cfg80211_scan_done
- #####check WPS IE
- ConnInfo.bWpsConnection ===> Not WPS IE
- 80211> Connect bssid b0:be:76:6d:14:85
- MT7601_ChipSwitchChannel: SwitchChannel#1(RF=15, 1T)
- PeerBeaconAtJoinAction(): HT-CtrlChannel=1, CentralChannel=>1
- PeerBeaconAtJoinAction(): Set CentralChannel=1
- MT7601_ChipSwitchChannel: SwitchChannel#1(RF=15, 1T)
- RTMP_TimerListAdd: add timer obj c4bd3aa8!
- [SCLIRQ]chang time :36327
- Rcv Wcid(1) AddBAReq
- Start Seq = 00000003
- RTMP_TimerListAdd: add timer obj c4bd5ac8!
- Rcv Wcid(1) AddBAReq
- Start Seq = 00000001
- RTMP_TimerListAdd: add timer obj c4bd5b2c!
- RTMP_TimerListAdd: add timer obj c4bd3ae8!
- RTMP_TimerListAdd: add timer obj c4bd3b28!
- Rcv Wcid(1) AddBAReq
- Start Seq = 00000001
- RTMP_TimerListAdd: add timer obj c4bd5b90!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement