API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 31st, 2020
204
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.88 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2018.11-stm32mp-r3 (Nov 14 2018 - 16:10:06 +0000)
  2.  
  3. CPU: STM32MP157AAC Rev.B
  4. Model: STMicroelectronics STM32MP157C-DK2 Discovery Board
  5. Board: stm32mp1 in basic mode (st,stm32mp157c-dk2)
  6. Board: MB1272 Var1 Rev.C-01
  7. DRAM: 512 MiB
  8. Clocks:
  9. - MPU : 650 MHz
  10. - MCU : 208.878 MHz
  11. - AXI : 266.500 MHz
  12. - PER : 24 MHz
  13. - DDR : 533 MHz
  14. NAND: 0 MiB
  15. MMC: STM32 SDMMC2: 0, STM32 SDMMC2: 1
  16. Loading Environment from EXT4... OK
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Net: eth0: ethernet@5800a000
  21. Hit any key to stop autoboot: 0
  22. Boot over mmc0!
  23. switch to partitions #0, OK
  24. mmc0 is current device
  25. Scanning mmc 0:4...
  26. Found U-Boot script /boot.scr.uimg
  27. 1553 bytes read in 1 ms (1.5 MiB/s)
  28. ## Executing script at c4100000
  29. Scanning mmc 0:4...
  30. Found /mmc0_stm32mp157c-dk2_extlinux/extlinux.conf
  31. Retrieving file: /mmc0_stm32mp157c-dk2_extlinux/extlinux.conf
  32. 614 bytes read in 1 ms (599.6 KiB/s)
  33. Retrieving file: /splash.bmp
  34. 46180 bytes read in 3 ms (14.7 MiB/s)
  35. Select the boot mode
  36. 1: stm32mp157c-dk2-sdcard
  37. 2: stm32mp157c-dk2-a7-examples-sdcard
  38. 3: stm32mp157c-dk2-m4-examples-sdcard
  39. Enter choice: 1: stm32mp157c-dk2-sdcard
  40. Retrieving file: /uImage
  41. 6652480 bytes read in 295 ms (21.5 MiB/s)
  42. append: root=/dev/mmcblk0p6 rootwait rw console=ttySTM0,115200
  43. Retrieving file: /stm32mp157c-dk2.dtb
  44. 68852 bytes read in 4 ms (16.4 MiB/s)
  45. ## Booting kernel from Legacy Image at c2000000 ...
  46. Image Name: Linux-4.19.49
  47. Created: 2019-06-09 7:17:25 UTC
  48. Image Type: ARM Linux Kernel Image (uncompressed)
  49. Data Size: 6652416 Bytes = 6.3 MiB
  50. Load Address: c2000040
  51. Entry Point: c2000040
  52. Verifying Checksum ... OK
  53. ## Flattened Device Tree blob at c4000000
  54. Booting using the fdt blob at 0xc4000000
  55. XIP Kernel Image ... OK
  56. Using Device Tree in place at c4000000, end c4013cf3
  57.  
  58. Starting kernel ...
  59.  
  60. [ 0.000000] Booting Linux on physical CPU 0x0
  61. [ 0.000000] Linux version 4.19.49 (oe-user@oe-host) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Sun Jun 9 07:17:25 UTC 2019
  62. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  63. [ 0.000000] CPU: div instructions available: patching division code
  64. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  65. [ 0.000000] OF: fdt: Machine model: STMicroelectronics STM32MP157C-DK2 Discovery Board
  66. [ 0.000000] Memory policy: Data cache writealloc
  67. [ 0.000000] efi: Getting EFI parameters from FDT:
  68. [ 0.000000] efi: UEFI not found.
  69. [ 0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
  70. [ 0.000000] OF: reserved mem: initialized node mcuram2@0x10000000, compatible id shared-dma-pool
  71. [ 0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
  72. [ 0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
  73. [ 0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
  74. [ 0.000000] OF: reserved mem: initialized node vdev0vring1@10042000, compatible id shared-dma-pool
  75. [ 0.000000] Reserved memory: created DMA memory pool at 0x10044000, size 0 MiB
  76. [ 0.000000] OF: reserved mem: initialized node vdev0buffer@10044000, compatible id shared-dma-pool
  77. [ 0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
  78. [ 0.000000] OF: reserved mem: initialized node mcuram@0x30000000, compatible id shared-dma-pool
  79. [ 0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
  80. [ 0.000000] OF: reserved mem: initialized node retram@0x38000000, compatible id shared-dma-pool
  81. [ 0.000000] cma: Reserved 128 MiB at 0xd8000000
  82. [ 0.000000] psci: probing for conduit method from DT.
  83. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  84. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  85. [ 0.000000] psci: Trusted OS migration not required
  86. [ 0.000000] psci: SMC Calling Convention v1.0
  87. [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4b0 with crng_init=0
  88. [ 0.000000] percpu: Embedded 17 pages/cpu s40204 r8192 d21236 u69632
  89. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113536
  90. [ 0.000000] Kernel command line: root=/dev/mmcblk0p6 rootwait rw console=ttySTM0,115200
  91. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  92. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  93. [ 0.000000] Memory: 306148K/458752K available (10240K kernel code, 823K rwdata, 2892K rodata, 1024K init, 209K bss, 21532K reserved, 131072K cma-reserved, 0K highmem)
  94. [ 0.000000] Virtual kernel memory layout:
  95. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  96. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  97. [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
  98. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  99. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  100. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  101. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (11232 kB)
  102. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  103. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 824 kB)
  104. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 210 kB)
  105. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  106. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  107. [ 0.000000] rcu: RCU event tracing is enabled.
  108. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  109. [ 0.000000] Tasks RCU enabled.
  110. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  111. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  112. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  113. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  114. [ 0.000010] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  115. [ 0.000030] Switching to timer-based delay loop, resolution 41ns
  116. [ 0.001891] Console: colour dummy device 80x30
  117. [ 0.001940] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  118. [ 0.001962] pid_max: default: 32768 minimum: 301
  119. [ 0.002182] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  120. [ 0.002204] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  121. [ 0.003209] CPU: Testing write buffer coherency: ok
  122. [ 0.003710] CPU0: update cpu_capacity 1024
  123. [ 0.003732] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  124. [ 0.059797] Setting up static identity map for 0xc0100000 - 0xc0100060
  125. [ 0.079781] rcu: Hierarchical SRCU implementation.
  126. [ 0.103931] EFI services will not be available.
  127. [ 0.119933] smp: Bringing up secondary CPUs ...
  128. [ 0.200305] CPU1: update cpu_capacity 1024
  129. [ 0.200318] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  130. [ 0.200540] smp: Brought up 1 node, 2 CPUs
  131. [ 0.200568] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  132. [ 0.200579] CPU: All CPU(s) started in SVC mode.
  133. [ 0.201712] devtmpfs: initialized
  134. [ 0.226969] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  135. [ 0.227478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  136. [ 0.227511] futex hash table entries: 512 (order: 3, 32768 bytes)
  137. [ 0.233555] pinctrl core: initialized pinctrl subsystem
  138. [ 0.235107] DMI not present or invalid.
  139. [ 0.235704] NET: Registered protocol family 16
  140. [ 0.242992] DMA: preallocated 256 KiB pool for atomic coherent allocations
  141. [ 0.245451] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  142. [ 0.245473] hw-breakpoint: maximum watchpoint size is 8 bytes.
  143. [ 0.245759] Serial: AMBA PL011 UART driver
  144. [ 0.247994] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
  145. [ 0.248031] stm32-pm-domain pm_domain: subdomain core-power-domain registered
  146. [ 0.248047] stm32-pm-domain pm_domain: domains probed
  147. [ 0.255400] /soc/interrupt-controller@5000d000: bank0
  148. [ 0.255421] /soc/interrupt-controller@5000d000: bank1
  149. [ 0.255434] /soc/interrupt-controller@5000d000: bank2
  150. [ 0.264122] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOA bank added
  151. [ 0.264457] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOB bank added
  152. [ 0.264763] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOC bank added
  153. [ 0.265046] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOD bank added
  154. [ 0.265316] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOE bank added
  155. [ 0.265634] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOF bank added
  156. [ 0.265913] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOG bank added
  157. [ 0.266191] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOH bank added
  158. [ 0.266469] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOI bank added
  159. [ 0.266647] stm32mp157-pinctrl soc:pin-controller@50002000: Pinctrl STM32 initialized
  160. [ 0.267530] stm32mp157-pinctrl soc:pin-controller-z@54004000: GPIOZ bank added
  161. [ 0.267557] stm32mp157-pinctrl soc:pin-controller-z@54004000: Pinctrl STM32 initialized
  162. [ 0.287366] stm32-mdma 58000000.dma: STM32 MDMA driver registered
  163. [ 0.292673] SCSI subsystem initialized
  164. [ 0.293477] usbcore: registered new interface driver usbfs
  165. [ 0.293558] usbcore: registered new interface driver hub
  166. [ 0.293703] usbcore: registered new device driver usb
  167. [ 0.294025] pps_core: LinuxPPS API ver. 1 registered
  168. [ 0.294039] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  169. [ 0.294072] PTP clock support registered
  170. [ 0.294357] EDAC MC: Ver: 3.0.0
  171. [ 0.295246] Advanced Linux Sound Architecture Driver Initialized.
  172. [ 0.296825] clocksource: Switched to clocksource arch_sys_counter
  173. [ 0.391354] NET: Registered protocol family 2
  174. [ 0.392391] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  175. [ 0.392444] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  176. [ 0.392510] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  177. [ 0.392607] TCP: Hash tables configured (established 4096 bind 4096)
  178. [ 0.392761] UDP hash table entries: 256 (order: 1, 8192 bytes)
  179. [ 0.392807] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  180. [ 0.393280] NET: Registered protocol family 1
  181. [ 0.394188] RPC: Registered named UNIX socket transport module.
  182. [ 0.394209] RPC: Registered udp transport module.
  183. [ 0.394220] RPC: Registered tcp transport module.
  184. [ 0.394230] RPC: Registered tcp NFSv4.1 backchannel transport module.
  185. [ 0.395299] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  186. [ 0.397585] Initialise system trusted keyrings
  187. [ 0.397955] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  188. [ 0.408784] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  189. [ 0.409929] NFS: Registering the id_resolver key type
  190. [ 0.409992] Key type id_resolver registered
  191. [ 0.410004] Key type id_legacy registered
  192. [ 0.410217] ntfs: driver 2.1.32 [Flags: R/O].
  193. [ 0.410711] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  194. [ 0.411633] fuse init (API version 7.27)
  195. [ 0.415564] NET: Registered protocol family 38
  196. [ 0.415595] Key type asymmetric registered
  197. [ 0.415608] Asymmetric key parser 'x509' registered
  198. [ 0.415704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  199. [ 0.415721] io scheduler noop registered
  200. [ 0.415733] io scheduler deadline registered
  201. [ 0.415992] io scheduler cfq registered (default)
  202. [ 0.416009] io scheduler mq-deadline registered
  203. [ 0.416021] io scheduler kyber registered
  204. [ 0.422519] stm32-dma 48000000.dma: STM32 DMA driver registered
  205. [ 0.424708] stm32-dma 48001000.dma: STM32 DMA driver registered
  206. [ 0.505469] STM32 USART driver initialized
  207. [ 0.507032] 4000e000.serial: ttySTM3 at MMIO 0x4000e000 (irq = 24, base_baud = 4000000) is a stm32-usart
  208. [ 0.507325] serial serial0: tty port ttySTM3 registered
  209. [ 0.507387] stm32-usart 4000e000.serial: interrupt mode used for rx (no dma)
  210. [ 0.507404] stm32-usart 4000e000.serial: interrupt mode used for tx (no dma)
  211. [ 0.507431] genirq: irq_chip stm32-exti-h did not update eff. affinity mask of irq 68
  212. [ 0.508780] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 25, base_baud = 4000000) is a stm32-usart
  213. [ 1.443564] console [ttySTM0] enabled
  214. [ 1.447807] stm32-usart 40010000.serial: interrupt mode used for rx (no dma)
  215. [ 1.454209] stm32-usart 40010000.serial: interrupt mode used for tx (no dma)
  216. [ 1.484707] random: fast init done
  217. [ 1.489064] brd: module loaded
  218. [ 1.494833] random: crng init done
  219. [ 1.503999] loop: module loaded
  220. [ 1.512131] libphy: Fixed MDIO Bus: probed
  221. [ 1.516543] CAN device driver interface
  222. [ 1.521503] stm32-dwmac 5800a000.ethernet: PTP uses main clock
  223. [ 1.525890] stm32-dwmac 5800a000.ethernet: no reset control found
  224. [ 1.532149] stm32-dwmac 5800a000.ethernet: No phy clock provided...
  225. [ 1.547788] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
  226. [ 1.553303] stm32-dwmac 5800a000.ethernet: DWMAC4/5
  227. [ 1.558323] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
  228. [ 1.565573] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
  229. [ 1.572911] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
  230. [ 1.579793] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
  231. [ 1.586029] stm32-dwmac 5800a000.ethernet: TSO supported
  232. [ 1.591364] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  233. [ 1.599203] stm32-dwmac 5800a000.ethernet: TSO feature enabled
  234. [ 1.605237] libphy: stmmac: probed
  235. [ 1.611251] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  236. [ 1.617352] usbcore: registered new interface driver pegasus
  237. [ 1.622927] usbcore: registered new interface driver asix
  238. [ 1.628359] usbcore: registered new interface driver ax88179_178a
  239. [ 1.634395] usbcore: registered new interface driver cdc_ether
  240. [ 1.640285] usbcore: registered new interface driver smsc75xx
  241. [ 1.646011] usbcore: registered new interface driver smsc95xx
  242. [ 1.651765] usbcore: registered new interface driver net1080
  243. [ 1.657516] usbcore: registered new interface driver cdc_subset
  244. [ 1.663303] usbcore: registered new interface driver zaurus
  245. [ 1.668957] usbcore: registered new interface driver cdc_ncm
  246. [ 1.675827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  247. [ 1.681122] ehci-platform: EHCI generic platform driver
  248. [ 1.686898] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  249. [ 1.692455] ohci-platform: OHCI generic platform driver
  250. [ 1.698422] usbcore: registered new interface driver usb-storage
  251. [ 1.708706] stm32_rtc 5c004000.rtc: rtc core: registered 5c004000.rtc as rtc0
  252. [ 1.714863] stm32_rtc 5c004000.rtc: Date/Time must be initialized
  253. [ 1.720576] stm32_rtc 5c004000.rtc: registered rev:1.2
  254. [ 1.726206] i2c /dev entries driver
  255. [ 1.751181] stm32f7-i2c 40012000.i2c: can't use DMA
  256. [ 1.758423] sii902x 0-0039: Failed to get supply 'iovcc': -517
  257. [ 1.763746] stm32f7-i2c 40012000.i2c: STM32F7 I2C-0 bus adapter
  258. [ 1.790914] stm32f7-i2c 5c002000.i2c: can't use DMA
  259. [ 1.802758] stpmic1 1-0033: PMIC Chip Version: 0x10
  260. [ 1.812004] BUCK1: supplied by regulator-dummy
  261. [ 1.819013] BUCK2: supplied by regulator-dummy
  262. [ 1.825499] BUCK3: supplied by regulator-dummy
  263. [ 1.832424] BUCK4: supplied by regulator-dummy
  264. [ 1.838997] LDO1: supplied by v3v3
  265. [ 1.846529] LDO2: supplied by regulator-dummy
  266. [ 1.853347] LDO3: supplied by vdd_ddr
  267. [ 1.859526] LDO4: supplied by regulator-dummy
  268. [ 1.863989] LDO5: supplied by regulator-dummy
  269. [ 1.870955] LDO6: supplied by v3v3
  270. [ 1.876736] VREF_DDR: supplied by regulator-dummy
  271. [ 1.883281] BOOST: supplied by regulator-dummy
  272. [ 1.887472] VBUS_OTG: supplied by bst_out
  273. [ 1.891412] SW_OUT: supplied by bst_out
  274. [ 1.898733] input: pmic_onkey as /devices/platform/soc/5c002000.i2c/i2c-1/1-0033/5c002000.i2c:stpmic@33:onkey/input/input0
  275. [ 1.909025] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-1 bus adapter
  276. [ 1.918187] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
  277. [ 1.928946] mmci-pl18x 58005000.sdmmc: Linked as a consumer to regulator.8
  278. [ 1.934525] mmci-pl18x 58005000.sdmmc: mmc0: PL180 manf 53 rev2 at 0x58005000 irq 52,0 (pio)
  279. [ 1.971936] mmci-pl18x 58007000.sdmmc: allocated mmc-pwrseq
  280. [ 1.976420] mmci-pl18x 58007000.sdmmc: Linked as a consumer to regulator.8
  281. [ 1.984208] mmci-pl18x 58007000.sdmmc: mmc1: PL180 manf 53 rev1 at 0x58007000 irq 53,0 (pio)
  282. [ 2.018239] sdhci: Secure Digital Host Controller Interface driver
  283. [ 2.022960] sdhci: Copyright(c) Pierre Ossman
  284. [ 2.027431] Synopsys Designware Multimedia Card Interface Driver
  285. [ 2.033952] sdhci-pltfm: SDHCI platform and OF driver helper
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!