API tools faq
paste
Guest User

Tanix TX6 mini

a guest
Jun 26th, 2019
1,243
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 68.64 KB | None | 0 0
raw download clone embed print report
  1. [1903]HELLO! BOOT0 is starting!
  2. [1906]boot0 commit : 1b5a253387759eb6514051d135164e9254d0b46c
  3.  
  4. [1925]set pll start
  5. [1928]set pll end
  6. [1930]rtc[0] value = 0x00000000
  7. [1933]rtc[1] value = 0x00000000
  8. [1936]rtc[2] value = 0x00000000
  9. [1939]rtc[3] value = 0x00000000
  10. [1943]rtc[4] value = 0x00000000
  11. [1946]rtc[5] value = 0x00000000
  12. [1949]DRAM VERSION IS V2_78
  13. [1952]the chip id is 0x00000003
  14. [1955]the chip id is 0x00000003
  15. [1958]the chip id is 0x00000003
  16. [1961]the chip id is 0x00000003
  17. [1964]the chip id is 0x00000003
  18. [1967]chip id check OK
  19. [1970]DRAM CLK =648 MHZ
  20. [1972]DRAM Type =3 (3:DDR3,4:DDR4,6:LPDDR2,7:LPDDR3)
  21. [1977]DRAM zq value: 003b3bfb
  22. [2282]IPRD=00880088--PGCR0=00000f7d--PLL=b0003500
  23. [2286]para1 = 0000310b,para2 = 08000001
  24. [2296]DRAM simple test OK.
  25. [2299]dram size =2048
  26. [2302]card no is 2
  27. [2304]sdcard 2 line count 8
  28. [2307][mmc]: mmc driver ver 2017-10-19 10:34:00
  29. [2311][mmc]: mmc 2 bias 00000004
  30. [2320][mmc]: ***Try MMC card 2***
  31. [2335][mmc]: MMC 5.1
  32. [2337][mmc]: HSDDR52/DDR50 8 bit
  33. [2340][mmc]: 50000000 Hz
  34. [2342][mmc]: 14800 MB
  35. [2345][mmc]: ***SD/MMC 2 init OK!!!***
  36. [2428]Loading boot-pkg Succeed(index=0).
  37. [2432]Entry_name = u-boot
  38. [2448]Entry_name = parameter
  39. [2451]Entry_name = monitor
  40. [2455]Entry_name = scp
  41. [2464]set arisc reset to de-assert state
  42. [2468]Entry_name = soc-cfg
  43. [2472]Entry_name = dtb
  44. [2476]Entry_name = logo
  45. [2479]Ready to disable icache.
  46. [2482]Jump to secend Boot.
  47. INFO: Configuring SPC Controller
  48. NOTICE: BL3-1: v1.0(debug):c5e8aec
  49. NOTICE: BL3-1: Built : 14:42:22, Apr 26 2018
  50. NOTICE: BL3-1 commit: c5e8aec20ca8c6ce31078c5689cbdb1a7352c813
  51.  
  52. INFO: BL3-1: Initializing runtime services
  53. ERROR: Error initializing runtime service tspd_fast
  54. INFO: BL3-1: Preparing for EL3 exit to normal world
  55. INFO: BL3-1: Next image address = 0x4a000000
  56. INFO: BL3-1: Next image spsr = 0x1d3
  57.  
  58.  
  59. U-Boot 2014.07 (May 18 2019 - 13:56:05) Allwinner Technology
  60.  
  61. I2C: ready
  62. [SCP] :sunxi-arisc driver begin startup 2
  63. [SCP] :arisc version: []
  64. [SCP] :sunxi-arisc driver v1.10 is starting
  65. [2.567]PMU: cpux 1440 Mhz,AXI=720 Mhz
  66.  
  67. fd650:show_string boot 8
  68. Led_Show_650:::acfPStr == boot !!!
  69. Led_Show_650:::pinput[0] == b, data[0] == 0x67
  70. Led_Show_650:::pinput[1] == o, data[1] == 0x63
  71. Led_Show_650:::pinput[2] == o, data[2] == 0x63
  72. Led_Show_650:::pinput[3] == t, data[3] == 0x47
  73. [2.659][cpu1]__clk_enable: clk is null.
  74. [2.659][cpu1]hdmi cec clk enable failed!
  75. [2.659]MMC: 2
  76. SUNXI SD/MMC: 2
  77. [2.663][cpu1]key emac have not been burned yet
  78. Normal
  79. [2.678]no item name key_burned_flag in the map
  80. [2.678]sunxi storage read fail
  81. [2.678]sunxi secure storage has no flag
  82. [2.678]usb burn from boot
  83. delay time 0
  84. [2.685]usb prepare ok
  85. [3.486]overtime
  86. [3.489]do_burn_from_boot usb : no usb exist
  87. [3.492]no item name device_unlock in the map
  88. [3.492]sunxi storage read fail
  89. sunxi secure storage has no flag
  90. --------fastboot partitions--------
  91. -total partitions:18-
  92. -name- -start- -size-
  93. UDISK : bda40000 de1bbc00
  94. bootloader : 1000000 2000000
  95. env : 3000000 1000000
  96. boot : 4000000 2000000
  97. system : 6000000 60000000
  98. vendor : 66000000 f000000
  99. misc : 75000000 1000000
  100. recovery : 76000000 2000000
  101. cache : 78000000 40000000
  102. metadata : b8000000 1000000
  103. private : b9000000 1000000
  104. frp : ba000000 80000
  105. empty : ba080000 f80000
  106. dtbo : bb000000 200000
  107. media_data : bb200000 1000000
  108. Reserve0 : bc200000 1000000
  109. sysrecovery : bd200000 800000
  110. esm : bda00000 40000
  111. -----------------------------------
  112. [4.658]no item name rootwait init in the map
  113. [4.658]sunxi storage read fail
  114. update mac = 04-81-90-41-2B-82
  115. [4.659]no item name wifi_mac in the map
  116. [4.659]sunxi storage read fail
  117. [4.659]no item name bt_mac in the map
  118. [4.659]sunxi storage read fail
  119. [4.659]no item name specialstr in the map
  120. [4.662]sunxi storage read fail
  121. ** Unrecognized filesystem type **
  122. Hit any key to stop autoboot: 0
  123. [9.012]
  124. Starting kernel ...
  125.  
  126. INFO: BL3-1: Next image address = 0x40080000
  127. INFO: BL3-1: Next image spsr = 0x3c5
  128. [ 0.000000] Booting Linux on physical CPU 0x0
  129. [ 0.000000] Linux version 4.9.118 (zhengzhongming@ubuntu2) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #2 SMP PREEMPT Wed May 8 20:05:21 CST 2019
  130. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  131. [ 0.000000] bootconsole [earlycon0] enabled
  132. [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
  133. [ 0.000000] On node 0 totalpages: 524288
  134. [ 0.000000] DMA zone: 8192 pages used for memmap
  135. [ 0.000000] DMA zone: 0 pages reserved
  136. [ 0.000000] DMA zone: 524288 pages, LIFO batch:31
  137. [ 0.000000] psci: probing for conduit method from DT.
  138. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  139. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  140. [ 0.000000] psci: Trusted OS migration not required
  141. [ 0.000000] percpu: Embedded 22 pages/cpu @ffffffc07bf0f000 s52992 r8192 d28928 u90112
  142. [ 0.000000] pcpu-alloc: s52992 r8192 d28928 u90112 alloc=22*4096
  143. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  144. [ 0.000000] Detected VIPT I-cache on CPU0
  145. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  146. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
  147. [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x05000000 initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 rootwait init=/init partitions=UDISK@mmcblk0p1:bootloader@mmcblk0p2:env@mmcblk0p3:boot@mmcblk0p4:system@mmcblk0p5:vendor@mmcblk0p6:misc@mmcblk0p7:recovery@mmcblk0p8:cache@mmcblk0p9:metadata@mmcblk0p10:private@mmcblk0p11:frp@mmcblk0p12:empty@mmcblk0p13:dtbo@mmcblk0p14:media_data@mmcblk0p15:Reserve0@mmcblk0p16:sysrecovery@mmcblk0p17:esm@mmcblk0p18 cma=64M mac_addr=04-81-90-41-2B-82 wifi_mac= bt_mac= specialstr= selinux=1 androidboot.selinux=permissive androidboot.dtbo_idx=0,1,2 buildvariant=userdebug veritykeyid=id:7e4333f9bba00adfe0ede979e28ed1920492b40f androidboot.mode=normal androidboot.serialno=ac001404a7430771d51 androidboot.hardware=sun50iw6p1 boot_type=2 gpt=1
  148. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  149. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  150. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  151. [ 0.000000] Memory: 1959692K/2097152K available (9342K kernel code, 2078K rwdata, 3692K rodata, 2688K init, 731K bss, 71924K reserved, 65536K cma-reserved)
  152. [ 0.000000] Virtual kernel memory layout:
  153. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  154. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  155. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff80089a0000 ( 9344 KB)
  156. [ 0.000000] .rodata : 0xffffff80089a0000 - 0xffffff8008d40000 ( 3712 KB)
  157. [ 0.000000] .init : 0xffffff8008d40000 - 0xffffff8008fe0000 ( 2688 KB)
  158. [ 0.000000] .data : 0xffffff8008fe0000 - 0xffffff80091e7808 ( 2079 KB)
  159. [ 0.000000] .bss : 0xffffff80091e7808 - 0xffffff800929e448 ( 732 KB)
  160. [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
  161. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  162. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  163. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB actual)
  164. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
  165. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  166. [ 0.000000] Preemptible hierarchical RCU implementation.
  167. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  168. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  169. [ 0.000000] clk sata not found in of_sunxi_periph_clk_setup
  170. [ 0.000000] clk sata_24m not found in of_sunxi_periph_clk_setup
  171. [ 0.000000] Can't get timer clock
  172. [ 0.000000] Failed to initialize '/soc@03000000/timer@03009000': -2[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
  173. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  174. [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  175. [ 0.008158] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  176. [ 0.018199] pid_max: default: 32768 minimum: 301
  177. [ 0.022902] Security Framework initialized
  178. [ 0.026876] SELinux: Initializing.
  179. [ 0.030398] SELinux: Starting in permissive mode
  180. [ 0.035049] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  181. [ 0.041694] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  182. [ 0.049754] sched-energy: CPU device node has no sched-energy-costs
  183. [ 0.055057] Invalid sched_group_energy for CPU0
  184. [ 0.059547] CPU0: update cpu_capacity 1024
  185. [ 0.063627] ASID allocator initialised with 32768 entries
  186. [ 0.096177] BOOTEVENT: 96.172873: ON
  187. [ 0.126034] Detected VIPT I-cache on CPU1
  188. [ 0.126075] Invalid sched_group_energy for CPU1
  189. [ 0.126077] CPU1: update cpu_capacity 1024
  190. [ 0.126080] CPU1: Booted secondary processor [410fd034]
  191. [ 0.149395] Detected VIPT I-cache on CPU2
  192. [ 0.149414] Invalid sched_group_energy for CPU2
  193. [ 0.149416] CPU2: update cpu_capacity 1024
  194. [ 0.149418] CPU2: Booted secondary processor [410fd034]
  195. [ 0.172789] Detected VIPT I-cache on CPU3
  196. [ 0.172807] Invalid sched_group_energy for CPU3
  197. [ 0.172809] CPU3: update cpu_capacity 1024
  198. [ 0.172811] CPU3: Booted secondary processor [410fd034]
  199. [ 0.172869] Brought up 4 CPUs
  200. [ 0.206859] SMP: Total of 4 processors activated.
  201. [ 0.211547] CPU features: detected feature: 32-bit EL0 Support
  202. [ 0.217353] CPU features: detected feature: Kernel page table isolation (KPTI)
  203. [ 0.227093] CPU: All CPU(s) started at EL1
  204. [ 0.228632] alternatives: patching kernel code
  205. [ 0.233212] Invalid sched_group_energy for CPU3
  206. [ 0.237550] CPU3: update max cpu_capacity 1024
  207. [ 0.241966] Invalid sched_group_energy for Cluster3
  208. [ 0.246819] Invalid sched_group_energy for CPU2
  209. [ 0.251326] Invalid sched_group_energy for Cluster2
  210. [ 0.256179] Invalid sched_group_energy for CPU1
  211. [ 0.260686] Invalid sched_group_energy for Cluster1
  212. [ 0.265539] Invalid sched_group_energy for CPU0
  213. [ 0.270046] Invalid sched_group_energy for Cluster0
  214. [ 0.275394] CPU1: update max cpu_capacity 1024
  215. [ 0.279570] devtmpfs: initialized
  216. [ 0.307900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  217. [ 0.307995] futex hash table entries: 1024 (order: 5, 131072 bytes)
  218. [ 0.309945] atomic64_test: passed
  219. [ 0.309989] pinctrl core: initialized pinctrl subsystem
  220. [ 0.311747] NET: Registered protocol family 16
  221. [ 0.315908] dump_class_init,859, success
  222. [ 0.335135] cpuidle: using governor menu
  223. [ 0.336233] sunxi iommu: irq = 7
  224. [ 0.336750] vdso: 2 pages (1 code @ ffffff80089a8000, 1 data @ ffffff8008fe4000)
  225. [ 0.336819] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  226. [ 0.340670] DMA: preallocated 256 KiB pool for atomic allocations
  227. [ 0.349092] sun50iw6p1-r-pinctrl r_pio: initialized sunXi PIO driver
  228. [ 0.357900] sun50iw6p1-pinctrl pio: initialized sunXi PIO driver
  229. [ 0.359288] sunxi hwspinlock vbase:0xffffff8008058000
  230. [ 0.364473] iommu: Adding device 1c0e000.ve to group 0
  231. [ 0.368493] iommu: Adding device 1c00000.vp9 to group 0
  232. [ 0.379410] iommu: Adding device disp to group 0
  233. [ 0.381875] iommu: Adding device 2100000.isp to group 0
  234. [ 0.383352] iommu: Adding device 2101000.scaler to group 0
  235. [ 0.388834] iommu: Adding device 2101400.scaler to group 0
  236. [ 0.394411] iommu: Adding device vinc0 to group 0
  237. [ 0.399061] iommu: Adding device vinc1 to group 0
  238. [ 0.404236] iommu: Adding device di to group 0
  239. [ 0.445706] pwm module init!
  240. [ 0.448861] [ARISC] :sunxi-arisc driver v3.00
  241. [ 0.450500] [ARISC] :sunxi-arisc driver v3.00 startup succeeded
  242. [ 0.451166] SCSI subsystem initialized
  243. [ 0.451457] usbcore: registered new interface driver usbfs
  244. [ 0.451557] usbcore: registered new interface driver hub
  245. [ 0.451688] usbcore: registered new device driver usb
  246. [ 0.456552] media: Linux media interface: v0.10
  247. [ 0.460894] Linux video capture interface: v2.00
  248. [ 0.469111] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000
  249. [ 0.472472] ion_parse_dt_heap_common: id 1 type 1 name sys_contig align 1000
  250. [ 0.479450] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000
  251. [ 0.485854] ion_parse_dt_heap_common: id 6 type 6 name secure align 1000
  252. [ 0.492649] drm config service not available: FFFFFFFF
  253. [ 0.497528] Advanced Linux Sound Architecture Driver Initialized.
  254. [ 0.504135] Bluetooth: Core ver 2.22
  255. [ 0.507165] NET: Registered protocol family 31
  256. [ 0.511555] Bluetooth: HCI device and connection manager initialized
  257. [ 0.517885] Bluetooth: HCI socket layer initialized
  258. [ 0.522740] Bluetooth: L2CAP socket layer initialized
  259. [ 0.527788] Bluetooth: SCO socket layer initialized
  260. [ 0.534670] clocksource: Switched to clocksource arch_sys_counter
  261. [ 0.601072] VFS: Disk quotas dquot_6.6.0
  262. [ 0.601179] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  263. [ 0.601461] FS-Cache: Loaded
  264. [ 0.601703] CacheFiles: Loaded
  265. [ 0.603555] udc_init,0
  266. [ 0.603914] sunxi_i2c_probe()1210 - [i2c3] failed to get regulator id
  267. [ 0.604655] acx00_detect, l:397, twi_id:3, adapter->nr:3
  268. [ 0.609619] acx00_i2c_probe,l:279
  269. [ 0.613329] acx00_init_work,l:127
  270. [ 0.616985] sid_efuse_key_is_readable()634 - The key oem write protect bit not burned!
  271. [ 0.617297] NET: Registered protocol family 2
  272. [ 0.617828] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  273. [ 0.617940] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  274. [ 0.618219] TCP: Hash tables configured (established 16384 bind 16384)
  275. [ 0.618309] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  276. [ 0.618343] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  277. [ 0.618537] NET: Registered protocol family 1
  278. [ 0.618927] RPC: Registered named UNIX socket transport module.
  279. [ 0.618929] RPC: Registered udp transport module.
  280. [ 0.618930] RPC: Registered tcp transport module.
  281. [ 0.618932] RPC: Registered tcp NFSv4.1 backchannel transport module.
  282. [ 0.619225] sunxi budget cooling probe start !
  283. [ 0.619246] CPU freq cooling register Success
  284. [ 0.619259] CPU hotplug cooling register Success
  285. [ 0.619486] CPU budget cooling register Success
  286. [ 0.624035] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  287. [ 0.625824] audit: initializing netlink subsys (disabled)
  288. [ 0.625897] audit: type=2000 audit(0.536:1): initialized
  289. [ 0.626632] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  290. [ 0.635076] Registering sdcardfs 0.1
  291. [ 0.635395] FS-Cache: Netfs 'nfs' registered for caching
  292. [ 0.636115] FS-Cache: Netfs 'cifs' registered for caching
  293. [ 0.636361] ntfs: driver 2.1.32 [Flags: R/W].
  294. [ 0.636581] fuse init (API version 7.26)
  295. [ 0.637646] SELinux: Registering netfilter hooks
  296. [ 0.651699] NET: Registered protocol family 38
  297. [ 0.651730] io scheduler noop registered
  298. [ 0.651921] io scheduler cfq registered (default)
  299. [ 0.653112] gpio_pin_1(359) gpio_is_valid
  300. [ 0.653261] gpio_pin_2(356) gpio_is_valid
  301. [ 0.653377] gpio_pin_3(355) gpio_is_valid
  302. [ 0.653603] gpio name is PL7, ret = 0
  303. [ 0.653739] gpio name is PL4, ret = 0
  304. [ 0.653857] gpio name is PL3, ret = 0
  305. [ 0.653977] gpio_init finish with uesd
  306. [ 0.654063] [DISP]disp_module_init
  307. [ 0.801468] [DISP]disp_module_init finish
  308. [ 0.805375] sunxi_suspend_init, 0x40020000, 0x0, 0x800
  309. WARNING: Unimplemented Standard Service Call: 0xc0000026
  310. [ 0.837305] uart uart0: get regulator failed
  311. [ 0.837504] uart0: ttyS0 at MMIO 0x5000000 (irq = 213, base_baud = 1500000) is a SUNXI
  312. [ 0.837582] sw_console_setup()1679 - console setup baud 115200 parity n bits 8, flow n
  313. [ 0.837699] console [ttyS0] enabled
  314. [ 0.837699] console [ttyS0] enabled
  315. [ 0.861285] bootconsole [earlycon0] disabled
  316. [ 0.861285] bootconsole [earlycon0] disabled
  317. [ 0.870107] uart uart1: get regulator failed
  318. [ 0.878678] uart1: ttyS1 at MMIO 0x5000400 (irq = 214, base_baud = 1500000) is a SUNXI
  319. [ 0.888303] misc dump reg init
  320. [ 0.891872] Deinterlace Module initialized.
  321. [ 0.897513] Unable to detect cache hierarchy for CPU 0
  322. [ 0.912958] brd: module loaded
  323. [ 0.921882] loop: module loaded
  324. [ 0.926085] zram: Added device: zram0
  325. [ 0.930222] [NAND]nand comperaliti: allwinner,sun50iw6-nand
  326. [ 0.937162] acx00_init_work,l:134
  327. [ 0.941480] [NAND]Failed to insmod nand!!!
  328. [ 0.946452] Boot type 2
  329. [ 0.949571] sunxi-bt bt: bt_power_name (vcc-wifi)
  330. [ 0.954862] sunxi-bt bt: io_regulator_name (vcc-wifi-io)
  331. [ 0.960891] sunxi-bt bt: bt_rst gpio=388 mul-sel=1 pull=-1 drv_level=-1 data=0
  332. [ 0.969879] sunxi-wlan wlan: wlan_busnum (1)
  333. [ 0.974681] sunxi-wlan wlan: Missing wlan_power.
  334. [ 0.979863] sunxi-wlan wlan: wlan_power_name ((null))
  335. [ 0.985551] sunxi-wlan wlan: Missing wlan_io_regulator.
  336. [ 0.991425] sunxi-wlan wlan: io_regulator_name ((null))
  337. [ 0.997318] sunxi-wlan wlan: wlan_regon gpio=387 mul-sel=1 pull=-1 drv_level=-1 data=0
  338. [ 1.006623] sunxi-wlan wlan: get gpio chip_en failed
  339. [ 1.012220] sunxi-wlan wlan: power_en gpio=228 mul-sel=1 pull=-1 drv_level=-1 data=0
  340. [ 1.021349] sunxi-wlan wlan: wlan_hostwake gpio=384 mul-sel=0 pull=-1 drv_level=-1 data=0
  341. [ 1.031554] [ADDR_MGT] addr_mgt_init: success.
  342. [ 1.043215] sid_efuse_key_is_readable()634 - The key oem write protect bit not burned!
  343. [ 1.053528] libphy: Fixed MDIO Bus: probed
  344. [ 1.058156] tun: Universal TUN/TAP device driver, 1.6
  345. [ 1.063827] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  346. [ 1.071859] gmac-power1: NULL
  347. [ 1.075200] gmac-power2: NULL
  348. [ 1.079186] PPP generic driver version 2.4.2
  349. [ 1.084173] PPP BSD Compression module registered
  350. [ 1.089461] PPP Deflate Compression module registered
  351. [ 1.095153] PPP MPPE Compression module registered
  352. [ 1.100534] NET: Registered protocol family 24
  353. [ 1.105543] PPTP driver version 0.8.5
  354. [ 1.110013] usbcore: registered new interface driver rtl8150
  355. [ 1.116430] usbcore: registered new interface driver r8152
  356. [ 1.122644] usbcore: registered new interface driver asix
  357. [ 1.128753] usbcore: registered new interface driver ax88179_178a
  358. [ 1.135642] usbcore: registered new interface driver cdc_ether
  359. [ 1.142256] usbcore: registered new interface driver smsc75xx
  360. [ 1.148771] usbcore: registered new interface driver smsc95xx
  361. [ 1.155269] usbcore: registered new interface driver net1080
  362. [ 1.161665] usbcore: registered new interface driver cdc_subset
  363. [ 1.168356] usbcore: registered new interface driver zaurus
  364. [ 1.174679] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  365. [ 1.183058] usbcore: registered new interface driver cdc_ncm
  366. [ 1.189419] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  367. [ 1.196997] get drv_vbus is fail, 84
  368. [ 1.201016] get ehci0-controller, regulator_io is no nocare
  369. [ 1.207440] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff8009277f98, 0x:ffffff8009e92000, irq_no:d9
  370. [ 1.221065] sunxi-ehci 5101000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  371. [ 1.231249] sunxi-ehci 5101000.ehci0-controller: new USB bus registered, assigned bus number 1
  372. [ 1.241210] sunxi-ehci 5101000.ehci0-controller: irq 217, io mem 0xffffff8008a47f38
  373. [ 1.261349] sunxi-ehci 5101000.ehci0-controller: USB 0.0 started, EHCI 1.00
  374. [ 1.269313] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  375. [ 1.276949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  376. [ 1.285067] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  377. [ 1.293479] usb usb1: Manufacturer: Linux 4.9.118 ehci_hcd
  378. [ 1.299643] usb usb1: SerialNumber: sunxi-ehci
  379. [ 1.331489] hub 1-0:1.0: USB hub found
  380. [ 1.335727] hub 1-0:1.0: 1 port detected
  381. [ 1.340672] get drv_vbus is fail, 84
  382. [ 1.344693] get ehci3-controller, regulator_io is no nocare
  383. [ 1.351072] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff8009278958, 0x:ffffff8009e9c000, irq_no:dc
  384. [ 1.364698] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  385. [ 1.374877] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 2
  386. [ 1.384752] sunxi-ehci 5311000.ehci3-controller: irq 220, io mem 0xffffff8008a47f38
  387. [ 1.404681] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00
  388. [ 1.412626] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  389. [ 1.420259] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  390. [ 1.428369] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  391. [ 1.436776] usb usb2: Manufacturer: Linux 4.9.118 ehci_hcd
  392. [ 1.443831] usb usb2: SerialNumber: sunxi-ehci
  393. [ 1.474834] hub 2-0:1.0: USB hub found
  394. [ 1.479069] hub 2-0:1.0: 1 port detected
  395. [ 1.484173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  396. [ 1.491376] get drv_vbus is fail, 84
  397. [ 1.495392] get ohci0-controller, regulator_io is no nocare
  398. [ 1.501870] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff8009277298
  399. [ 1.512364] sunxi-ohci 5101000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  400. [ 1.522156] sunxi-ohci 5101000.ohci0-controller: new USB bus registered, assigned bus number 3
  401. [ 1.531885] sunxi-ohci 5101000.ohci0-controller: irq 218, io mem 0x58e2e705
  402. [ 1.598804] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  403. [ 1.606445] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  404. [ 1.614561] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  405. [ 1.622588] usb usb3: Manufacturer: Linux 4.9.118 ohci_hcd
  406. [ 1.628749] usb usb3: SerialNumber: sunxi-ohci
  407. [ 1.658152] hub 3-0:1.0: USB hub found
  408. [ 1.662385] hub 3-0:1.0: 1 port detected
  409. [ 1.667309] get drv_vbus is fail, 84
  410. [ 1.671346] get ohci3-controller, regulator_io is no nocare
  411. [ 1.677797] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff8009277c58
  412. [ 1.688291] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  413. [ 1.698095] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 4
  414. [ 1.707834] sunxi-ohci 5311000.ohci3-controller: irq 221, io mem 0x635f14c1
  415. [ 1.775462] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  416. [ 1.783094] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  417. [ 1.791222] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  418. [ 1.799240] usb usb4: Manufacturer: Linux 4.9.118 ohci_hcd
  419. [ 1.805402] usb usb4: SerialNumber: sunxi-ohci
  420. [ 1.834817] hub 4-0:1.0: USB hub found
  421. [ 1.839056] hub 4-0:1.0: 1 port detected
  422. [ 1.844798] get xhci-controller, regulator_io is no nocare
  423. [ 1.851456] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  424. [ 1.857634] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  425. [ 1.866507] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x00010010
  426. [ 1.876325] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0x05200000
  427. [ 1.883210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  428. [ 1.890847] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  429. [ 1.898971] usb usb5: Product: xHCI Host Controller
  430. [ 1.904446] usb usb5: Manufacturer: Linux 4.9.118 xhci-hcd
  431. [ 1.910605] usb usb5: SerialNumber: xhci-hcd.0.auto
  432. [ 1.941491] hub 5-0:1.0: USB hub found
  433. [ 1.945823] hub 5-0:1.0: 1 port detected
  434. [ 1.950551] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  435. [ 1.956731] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  436. [ 1.965395] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  437. [ 1.974579] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  438. [ 1.982212] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  439. [ 1.990337] usb usb6: Product: xHCI Host Controller
  440. [ 1.995823] usb usb6: Manufacturer: Linux 4.9.118 xhci-hcd
  441. [ 2.001990] usb usb6: SerialNumber: xhci-hcd.0.auto
  442. [ 2.031489] hub 6-0:1.0: USB hub found
  443. [ 2.035725] hub 6-0:1.0: 1 port detected
  444. [ 2.040894] usbcore: registered new interface driver cdc_acm
  445. [ 2.047263] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  446. [ 2.056393] usbcore: registered new interface driver uas
  447. [ 2.062488] usbcore: registered new interface driver usb-storage
  448. [ 2.069283] usbcore: registered new interface driver ums-alauda
  449. [ 2.075980] usbcore: registered new interface driver ums-cypress
  450. [ 2.082771] usbcore: registered new interface driver ums-datafab
  451. [ 2.089573] usbcore: registered new interface driver ums_eneub6250
  452. [ 2.096555] usbcore: registered new interface driver ums-freecom
  453. [ 2.103360] usbcore: registered new interface driver ums-isd200
  454. [ 2.110056] usbcore: registered new interface driver ums-jumpshot
  455. [ 2.116946] usbcore: registered new interface driver ums-karma
  456. [ 2.123544] usbcore: registered new interface driver ums-onetouch
  457. [ 2.130453] usbcore: registered new interface driver ums-realtek
  458. [ 2.137248] usbcore: registered new interface driver ums-sddr09
  459. [ 2.144037] usbcore: registered new interface driver ums-sddr55
  460. [ 2.150740] usbcore: registered new interface driver ums-usbat
  461. [ 2.157397] usb_serial_number:20080411
  462. [ 2.162455] input: sunxi-keyboard as /devices/virtual/input/input0
  463. [ 2.169889] usbcore: registered new interface driver xpad
  464. [ 2.176027] usbcore: registered new interface driver usb_acecad
  465. [ 2.182739] usbcore: registered new interface driver aiptek
  466. [ 2.189049] usbcore: registered new interface driver gtco
  467. [ 2.195167] usbcore: registered new interface driver hanwang
  468. [ 2.201574] usbcore: registered new interface driver kbtab
  469. [ 2.208830] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0
  470. [ 2.215886] sunxi-rtc rtc: RTC enabled
  471. [ 2.220117] sunxi_rtc_probe: bootup extend state 1
  472. [ 2.225950] i2c /dev entries driver
  473. [ 2.230186] IR NEC protocol handler initialized
  474. [ 2.235275] IR RC5(x/sz) protocol handler initialized
  475. [ 2.240952] sunxi cedar version 0.1
  476. [ 2.244971] VE: install start!!!
  477. [ 2.244971]
  478. [ 2.250392] cedar_ve: cedar-ve the get irq is 211
  479. [ 2.255960] VE: get debugfs_mpp_root is NULL, please check mpp
  480. [ 2.255960]
  481. [ 2.264178] VE: sunxi ve debug register driver failed!
  482. [ 2.264178]
  483. [ 2.271893] google_vp9: sunxi google vp9 version 0.1
  484. [ 2.277568] google_vp9: [google vp9]: install start!!!
  485. [ 2.283437] google_vp9: google vp9: the get irq is 212
  486. [ 2.289476] google_vp9: [cedar]: install end!!!
  487. [ 2.301595] sunxi gpu cooling probe start !
  488. [ 2.306314] CPU gpu cooling register Success
  489. [ 2.311710] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  490. [ 2.321056] device-mapper: uevent: version 1.0.3
  491. [ 2.326556] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  492. [ 2.336167] Bluetooth: HCI UART driver ver 2.3
  493. [ 2.341169] Bluetooth: HCI UART protocol H4 registered
  494. [ 2.346946] Bluetooth: HCI UART protocol Three-wire (H5) registered
  495. [ 2.354141] sunxi_cpufreq_init: support more opp_table and soc bin is 0
  496. [ 2.361578] [cpu_freq] ERR: DEBUG: get cpu 0 device
  497. [ 2.367092] [cpu_freq] ERR: Unable to get regulator
  498. [ 2.373665] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1440000 KHz
  499. [ 2.391353] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1488000 KHz
  500. [ 2.404524] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.19 2019-1-16 18:56)
  501. [ 2.413456] sunxi-mmc sdc2: regulator prop vmmc,str vcc-emmcv
  502. [ 2.419929] sunxi-mmc sdc2: regulator prop vqmmc,str vcc-emmcvq18
  503. [ 2.426789] sunxi-mmc sdc2: regulator prop vdmmc,str none
  504. [ 2.432868] sunxi-mmc sdc2: Can't get vdmmc33sw regulator string
  505. [ 2.439649] sunxi-mmc sdc2: Can't get vdmmc18sw regulator string
  506. [ 2.446412] sunxi-mmc sdc2: Can't get vqmmc33sw regulator string
  507. [ 2.453172] sunxi-mmc sdc2: Can't get vqmmc18sw regulator string
  508. [ 2.460051] get() with no identifier
  509. [ 2.464074] get() with no identifier
  510. [ 2.468094] get() with no identifier
  511. [ 2.472111] get() with no identifier
  512. [ 2.476134] sunxi-mmc sdc2: Failed getting OCR mask: -22
  513. [ 2.482109] sunxi-mmc sdc2: No vdmmc regulator found
  514. [ 2.487688] sunxi-mmc sdc2: No vd33sw regulator found
  515. [ 2.493368] sunxi-mmc sdc2: No vd18sw regulator found
  516. [ 2.499049] sunxi-mmc sdc2: No vq33sw regulator found
  517. [ 2.504726] sunxi-mmc sdc2: No vq18sw regulator found
  518. [ 2.510843] sunxi-mmc sdc2: set host busy
  519. [ 2.515413] mmc:failed to get gpios
  520. [ 2.519497] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  521. [ 2.544682] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  522. [ 2.571356] sunxi-mmc sdc2: detmode:alway in(non removable)
  523. [ 2.571374] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  524. [ 2.579704] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  525. [ 2.580753] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  526. [ 2.591566] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  527. [ 2.591614] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  528. [ 2.604425] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  529. [ 2.648771] sun50iw6p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
  530. [ 2.658079] sun50iw6p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
  531. [ 2.667396] sun50iw6p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
  532. [ 2.676707] sun50iw6p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
  533. [ 2.686028] sun50iw6p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
  534. [ 2.686334] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  535. [ 2.699677] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 8 timing LEGACY(SDR12) dt B
  536. [ 2.702205] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS200 dt B
  537. [ 2.702582] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS200 dt B
  538. [ 2.702764] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
  539. [ 2.702887] sunxi-mmc sdc2: sdc set ios:clk 52000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS(SDR20) dt B
  540. [ 2.703086] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS400 dt B
  541. [ 2.703208] sunxi-mmc sdc2: sdc set ios:clk 100000000Hz bm PP pm ON vdd 21 width 8 timing MMC-HS400 dt B
  542. [ 2.703384] mmc0: new HS400 MMC card at address 0001
  543. [ 2.703925] mmcblk0: mmc0:0001 D9D16G 14.5 GiB
  544. [ 2.704108] mmcblk0boot0: mmc0:0001 D9D16G partition 1 4.00 MiB
  545. [ 2.707639] mmcblk0boot1: mmc0:0001 D9D16G partition 2 4.00 MiB
  546. [ 2.709593] Alternate GPT is invalid, using primary GPT.
  547. [ 2.709639] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
  548. [ 2.819750] sun50iw6p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag0
  549. [ 2.829306] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.19 2019-1-16 18:56)
  550. [ 2.838293] sunxi-mmc sdc0: ***ctl-spec-caps*** 80
  551. [ 2.843698] sunxi-mmc sdc0: regulator prop vmmc,str vcc-sdcv
  552. [ 2.850065] sunxi-mmc sdc0: regulator prop vqmmc,str vcc-sdcvq33
  553. [ 2.856828] sunxi-mmc sdc0: regulator prop vdmmc,str vcc-sdcvd
  554. [ 2.863385] sunxi-mmc sdc0: Can't get vdmmc33sw regulator string
  555. [ 2.870142] sunxi-mmc sdc0: Can't get vdmmc18sw regulator string
  556. [ 2.876898] sunxi-mmc sdc0: Can't get vqmmc33sw regulator string
  557. [ 2.883653] sunxi-mmc sdc0: Can't get vqmmc18sw regulator string
  558. [ 2.890594] get() with no identifier
  559. [ 2.894615] get() with no identifier
  560. [ 2.898634] get() with no identifier
  561. [ 2.902653] get() with no identifier
  562. [ 2.906674] sunxi-mmc sdc0: Failed getting OCR mask: -22
  563. [ 2.912647] sunxi-mmc sdc0: No vd33sw regulator found
  564. [ 2.918330] sunxi-mmc sdc0: No vd18sw regulator found
  565. [ 2.924011] sunxi-mmc sdc0: No vq33sw regulator found
  566. [ 2.929689] sunxi-mmc sdc0: No vq18sw regulator found
  567. [ 2.935802] sunxi-mmc sdc0: set host busy
  568. [ 2.940369] sunxi-mmc sdc0: Got CD GPIO
  569. [ 2.944936] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  570. [ 2.971348] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  571. [ 2.998129] sunxi-mmc sdc0: detmode:gpio irq
  572. [ 2.998149] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  573. [ 3.005016] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  574. [ 3.027904] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  575. [ 3.038801] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.19 2019-1-16 18:56)
  576. [ 3.038921] sunxi-mmc sdc1: Can't get vmmc regulator string
  577. [ 3.038926] sunxi-mmc sdc1: Can't get vqmmc regulator string
  578. [ 3.038930] sunxi-mmc sdc1: Can't get vdmmc regulator string
  579. [ 3.038935] sunxi-mmc sdc1: Can't get vdmmc33sw regulator string
  580. [ 3.038939] sunxi-mmc sdc1: Can't get vdmmc18sw regulator string
  581. [ 3.038943] sunxi-mmc sdc1: Can't get vqmmc33sw regulator string
  582. [ 3.038948] sunxi-mmc sdc1: Can't get vqmmc18sw regulator string
  583. [ 3.038950] get() with no identifier
  584. [ 3.038952] get() with no identifier
  585. [ 3.038953] get() with no identifier
  586. [ 3.038955] get() with no identifier
  587. [ 3.038956] get() with no identifier
  588. [ 3.038958] get() with no identifier
  589. [ 3.038959] get() with no identifier
  590. [ 3.038963] sunxi-mmc sdc1: No vmmc regulator found
  591. [ 3.038966] sunxi-mmc sdc1: No vqmmc regulator found
  592. [ 3.038969] sunxi-mmc sdc1: No vdmmc regulator found
  593. [ 3.038973] sunxi-mmc sdc1: No vd33sw regulator found
  594. [ 3.038976] sunxi-mmc sdc1: No vd18sw regulator found
  595. [ 3.038979] sunxi-mmc sdc1: No vq33sw regulator found
  596. [ 3.038982] sunxi-mmc sdc1: No vq18sw regulator found
  597. [ 3.047975] sunxi-mmc sdc1: set host busy
  598. [ 3.048038] mmc:failed to get gpios
  599. [ 3.048203] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  600. [ 3.048220] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  601. [ 3.064686] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  602. [ 3.081356] sunxi-mmc sdc1: detmode:manually by software
  603. [ 3.082225] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
  604. [ 3.083055] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
  605. [ 3.083074] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  606. [ 3.085503] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  607. [ 3.087360] sunxi-mmc sdc1: smc 2 p1 err, cmd 8, RTO !!
  608. [ 3.088184] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  609. [ 3.088927] [EMCE]:Current Controller is EMMC!
  610. [ 3.088931] [EMCE]:VER:0x100100
  611. [ 3.089003] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  612. [ 3.089327] hidraw: raw HID events driver (C) Jiri Kosina
  613. [ 3.089687] usbcore: registered new interface driver usbhid
  614. [ 3.089689] usbhid: USB HID core driver
  615. [ 3.089827] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  616. [ 3.089968] ashmem: initialized
  617. [ 3.090538] optee: probing for conduit method from DT.
  618. [ 3.090544] optee: api uid mismatch
  619. [ 3.090647] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  620. [ 3.090871] usbcore: registered new interface driver snd-usb-audio
  621. [ 3.091522] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  622. [ 3.092346] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  623. [ 3.092421] failed get gpio-spdif gpio from dts,spdif_gpio:-2
  624. [ 3.093169] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  625. [ 3.093997] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  626. [ 3.094041] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  627. [ 3.094920] sndspdif sndspdif: spdif-hifi <-> spdif mapping ok
  628. [ 3.100529] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok
  629. [ 3.101975] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok
  630. [ 3.103684] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok
  631. [ 3.105947] u32 classifier
  632. [ 3.105950] Actions configured
  633. [ 3.105955] Netfilter messages via NETLINK v0.30.
  634. [ 3.105969] nfnl_acct: registering with nfnetlink.
  635. [ 3.106240] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  636. [ 3.106510] ctnetlink v0.93: registering with nfnetlink.
  637. [ 3.107029] xt_time: kernel timezone is -0000
  638. [ 3.107118] ipip: IPv4 and MPLS over IPv4 tunneling driver
  639. [ 3.107651] gre: GRE over IPv4 demultiplexor driver
  640. [ 3.107654] ip_gre: GRE over IPv4 tunneling driver
  641. [ 3.108616] IPv4 over IPsec tunneling driver
  642. [ 3.114193] ip_tables: (C) 2000-2006 Netfilter Core Team
  643. [ 3.114392] arp_tables: arp_tables: (C) 2002 David S. Miller
  644. [ 3.118193] Initializing XFRM netlink socket
  645. [ 3.118594] NET: Registered protocol family 10
  646. [ 3.119902] mip6: Mobile IPv6
  647. [ 3.119928] ip6_tables: (C) 2000-2006 Netfilter Core Team
  648. [ 3.128640] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  649. [ 3.129639] NET: Registered protocol family 17
  650. [ 3.129662] NET: Registered protocol family 15
  651. [ 3.129747] Bluetooth: RFCOMM TTY layer initialized
  652. [ 3.129758] Bluetooth: RFCOMM socket layer initialized
  653. [ 3.129781] Bluetooth: RFCOMM ver 1.11
  654. [ 3.129792] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  655. [ 3.129794] Bluetooth: BNEP filters: protocol multicast
  656. [ 3.129802] Bluetooth: BNEP socket layer initialized
  657. [ 3.129806] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  658. [ 3.129813] Bluetooth: HIDP socket layer initialized
  659. [ 3.131447] sid_efuse_key_is_readable()634 - The key thermal_sensor write protect bit not burned!
  660. [ 3.131609] write_efuse_to_reg_ver_3:getting efuse data bit out of 12-bit limit
  661. [ 3.133285] Registered cp15_barrier emulation handler
  662. [ 3.133296] Registered setend emulation handler
  663. [ 3.133959] registered taskstats version 1
  664. [ 3.134516] sun50iw6p1-pinctrl pio: expect_func as:hdmi, but muxsel(2) is func:ddc
  665. [ 3.134533] sun50iw6p1-pinctrl pio: expect_func as:hdmi, but muxsel(2) is func:ddc
  666. [ 3.134548] sun50iw6p1-pinctrl pio: expect_func as:hdmi, but muxsel(2) is func:hcec0
  667. [ 3.134851] HDMI 2.0 driver init start!
  668. [ 3.135268] boot_hdmi=false
  669. [ 3.135303] hdmi reg base:0x43f00000 esm_hpi_base:0x43f08000
  670. [ 3.135424] sun50iw6p1-pinctrl pio: expect_func as:hdmi, but muxsel(2) is func:ddc
  671. [ 3.135440] sun50iw6p1-pinctrl pio: expect_func as:hdmi, but muxsel(2) is func:ddc
  672. [ 3.135455] sun50iw6p1-pinctrl pio: expect_func as:hdmi, but muxsel(2) is func:hcec0
  673. [ 3.135733] Error: get hdmi power node failed
  674. [ 3.137416] HDMI2.0 module init end
  675. [ 3.645962] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  676. [ 3.675490] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  677. [ 3.698818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  678. [ 3.722153] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  679. [ 3.741357] [HDMI receive params]: tv mode: 0xa format:0x1 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8
  680. [ 3.754657] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  681. [ 3.775481] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  682. [ 3.798815] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  683. [ 3.822161] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  684. [ 3.845480] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  685. [ 3.868818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  686. [ 3.892152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  687. [ 3.915485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  688. [ 3.938818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  689. [ 3.962152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  690. [ 3.985485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  691. [ 4.008818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  692. [ 4.032153] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  693. [ 4.055485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  694. [ 4.078817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  695. [ 4.102153] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  696. [ 4.125485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  697. [ 4.148817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  698. [ 4.172152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  699. [ 4.195485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  700. [ 4.218817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  701. [ 4.225090] random: fast init done
  702. [ 4.245486] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  703. [ 4.268818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  704. [ 4.292153] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  705. [ 4.315485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  706. [ 4.338817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  707. [ 4.362152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  708. [ 4.385485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  709. [ 4.408818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  710. [ 4.432152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  711. [ 4.455486] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  712. [ 4.478818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  713. [ 4.502152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  714. [ 4.525485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  715. [ 4.548817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  716. [ 4.572152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  717. [ 4.595485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  718. [ 4.618818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  719. [ 4.642153] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  720. [ 4.665485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  721. [ 4.688817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  722. [ 4.712152] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  723. [ 4.735485] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  724. [ 4.758817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  725. [ 4.781633] [DISP] disp_device_attached_and_enable,line:212:[ 4.787806] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  726.  
  727. [ 4.793795] attached ok, mgr0<-->dev0
  728. [ 4.798114] [DISP] disp_device_attached_and_enable,line:225:
  729. [ 4.804295] type:4,mode:10,fmt:yuv444,bits:8bits,eotf:4,cs:257 dvi_hdmi:2, range:2 scan:0 ratio:8
  730. [ 4.815289] sid_efuse_key_is_readable()634 - The key oem write protect bit not burned!
  731. [ 4.815487] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  732. [ 4.832161] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  733. [ 4.853898] get det_vbus is fail, 84
  734. [ 4.855528] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  735. [ 4.863906] get id is fail, 84
  736. [ 4.867883] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:12 UTC (12)
  737. [ 4.872150] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  738. [ 4.883795] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok
  739. [ 4.888829] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  740. [ 4.899115] snddaudio snddaudio2: codec: snd-soc-dummy, codec_dai: snd-soc-dummy-dai.
  741. [ 4.908239] snddaudio snddaudio2: snd-soc-dummy-dai <-> sunxi-ahub-cpu-aif2 mapping ok
  742. [ 4.908848] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  743. [ 4.923903] snddaudio snddaudio3: codec: acx00-codec, codec_dai: acx00-dai.
  744. [ 4.932574] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  745. [ 4.958816] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  746. [ 4.982156] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  747. [ 4.995815] snddaudio snddaudio3: acx00-dai <-> sunxi-ahub-cpu-aif3 mapping ok
  748. [ 5.005488] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  749. [ 5.022965] axpdummy_ldo1: incomplete constraints, leaving on
  750. [ 5.028827] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  751. [ 5.035424] axpdummy_ldo2: incomplete constraints, leaving on
  752. [ 5.041901] axpdummy_ldo3: incomplete constraints, leaving on
  753. [ 5.045496] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  754. [ 5.054345] axpdummy_ldo5: incomplete constraints, leaving on
  755. [ 5.060830] axpdummy_ldo6: incomplete constraints, leaving on
  756. [ 5.062148] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  757. [ 5.073278] axpdummy_ldo7: incomplete constraints, leaving on
  758. [ 5.079749] ALSA device list:
  759. [ 5.082146] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  760. [ 5.089057] #0: sndspdif
  761. [ 5.092101] #1: sndahub
  762. [ 5.095047] #2: sndhdmi
  763. [ 5.097985] #3: snddaudio2
  764. [ 5.098818] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  765. [ 5.107195] #4: sndacx00-codec
  766. [ 5.112785] EXT4-fs (mmcblk0p5): couldn't mount as ext3 due to feature incompatibilities
  767. [ 5.118815] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  768. [ 5.130460] EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: (null)
  769. [ 5.135511] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  770. [ 5.144907] VFS: Mounted root (ext4 filesystem) readonly on device 179:5.
  771. [ 5.152148] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  772. [ 5.160054] Freeing unused kernel memory: 2688K
  773. [ 5.168847] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  774. [ 5.187930] init: init first stage started!
  775. [ 5.192163] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  776. [ 5.199194] init: Using Android DT directory /proc/device-tree/firmware/android/
  777. [ 5.208834] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  778. [ 5.225814] EXT4-fs (mmcblk0p6): mounted filesystem without journal. Opts: barrier=1
  779. [ 5.232158] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  780. [ 5.240734] init: [libfs_mgr]__mount(source=/dev/block/by-name/vendor,target=/vendor,type=ext4)=0: Success
  781. [ 5.248817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  782. [ 5.257830] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  783. [ 5.265685] init: Loading SELinux policy
  784. [ 5.268827] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  785. [ 5.282180] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  786. [ 5.293050] SELinux: 8192 avtab hash slots, 17884 rules.
  787. [ 5.305514] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  788. [ 5.309268] SELinux: 8192 avtab hash slots, 17884 rules.
  789. [ 5.309293] SELinux: 1 users, 4 roles, 1313 types, 0 bools, 1 sens, 1024 cats
  790. [ 5.309295] SELinux: 93 classes, 17884 rules
  791. [ 5.312683] SELinux: Completing initialization.
  792. [ 5.312686] SELinux: Setting up existing superblocks.
  793. [ 5.358843] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  794. [ 5.382168] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  795. [ 5.405587] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  796. [ 5.408573] audit: type=1403 audit(13.040:2): policy loaded auid=4294967295 ses=4294967295
  797. [ 5.408820] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
  798. [ 5.408820]
  799. [ 5.436742] selinux: SELinux: Loaded file_contexts
  800. [ 5.436742]
  801. [ 5.447585] init: init second stage started!
  802. [ 5.453274] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  803. [ 5.475544] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  804. [ 5.480708] init: Using Android DT directory /proc/device-tree/firmware/android/
  805. [ 5.485098] selinux: SELinux: Loaded file_contexts
  806. [ 5.485098]
  807. [ 5.485123] init: Running restorecon...
  808. [ 5.490777] init: waitid failed: No child processes
  809. [ 5.510481] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
  810. [ 5.524929] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  811. [ 5.525675] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  812. [ 5.526521] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1265
  813. [ 5.527176] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1266
  814. [ 5.527455] init: Parsing file /init.rc...
  815. [ 5.575514] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  816. [ 5.598853] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  817. [ 5.622208] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  818. [ 5.634192] ueventd: ueventd started!
  819. [ 5.641587] selinux: SELinux: Loaded file_contexts
  820. [ 5.641587]
  821. [ 5.648823] ueventd: Parsing file /ueventd.rc...
  822. [ 5.649488] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  823. [ 5.661600] ueventd: Parsing file /vendor/ueventd.rc...
  824. [ 5.668158] ueventd: Parsing file /odm/ueventd.rc...
  825. [ 5.673771] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  826. [ 5.684853] ueventd: Parsing file /ueventd.sun50iw6p1.rc...
  827. [ 5.685559] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  828. [ 5.697144] ueventd: Unable to read config file '/ueventd.sun50iw6p1.rc': open() failed: No such file or directory
  829. [ 5.725538] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  830. [ 5.748884] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  831. [ 5.772209] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  832. [ 5.795531] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  833. [ 5.818877] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  834. [ 5.842207] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  835. [ 5.865543] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  836. [ 5.888835] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  837. [ 5.896297] ueventd: Coldboot took 0.186 seconds
  838. [ 5.903759] keychord: using input dev sunxi-keyboard for fevent
  839. [ 5.912187] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  840. [ 5.934906] Registered swp emulation handler
  841. [ 5.935547] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  842. [ 5.952292] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  843. [ 5.963411] init: wait for '/dev/block/by-name/media_data' took 0ms
  844. [ 5.971108] FAT-fs (mmcblk0p15): bogus number of reserved sectors
  845. [ 5.978009] FAT-fs (mmcblk0p15): Can't find a valid FAT filesystem
  846. [ 5.978817] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  847. [ 6.005518] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  848. [ 6.028841] sunxi-mmc sdc0: smc 1 p0 err, cmd 55, RTO !!
  849. [ 6.051365] mmc1: card never left busy state
  850. [ 6.056184] mmc1: error -110 whilst initialising SD card
  851. [ 6.062195] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  852. [ 6.604688] hdmi_hpd_sys_config_release
  853. [ 7.957798] fsck.f2fs: Info: Fix the reported corruption.
  854. [ 7.957798]
  855. [ 7.965588] fsck.f2fs: Info: No support kernel version!
  856. [ 7.965588]
  857. [ 7.973231] fsck.f2fs: Info: Segments per section = 1
  858. [ 7.973231]
  859. [ 7.980583] fsck.f2fs: Info: Sections per zone = 1
  860. [ 7.980583]
  861. [ 7.987664] fsck.f2fs: Info: sector size = 512
  862. [ 7.987664]
  863. [ 7.994331] fsck.f2fs: Info: total sectors = 24055262 (11745 MB)
  864. [ 7.994331]
  865. [ 8.002757] fsck.f2fs: Info: MKFS version
  866. [ 8.002757]
  867. [ 8.008940] fsck.f2fs: "4.9.118 #2 SMP PREEMPT Wed May 8 20:05:21 CST 2019"
  868. [ 8.008940]
  869. [ 8.018628] fsck.f2fs: Info: FSCK version
  870. [ 8.018628]
  871. [ 8.024812] fsck.f2fs: from "4.9.118 #2 SMP PREEMPT Wed May 8 20:05:21 CST 2019"
  872. [ 8.024812]
  873. [ 8.054530] F2FS-fs (mmcblk0p1): Found nat_bits in checkpoint
  874. [ 8.172853] F2FS-fs (mmcblk0p1): recover_inode: ino = 22c5, name = playlog.db-wal, inline = 1
  875. [ 8.182619] F2FS-fs (mmcblk0p1): recover_data: ino = 22c5 (i_size: recover) recovered = 17, err = 0
  876. [ 8.192810] F2FS-fs (mmcblk0p1): recover_inode: ino = 86b, name = playlog.db, inline = 1
  877. [ 8.201997] F2FS-fs (mmcblk0p1): recover_data: ino = 86b (i_size: recover) recovered = 0, err = 0
  878. [ 8.214576] F2FS-fs (mmcblk0p1): checkpoint: version = 2d6fc5b6
  879. [ 8.221372] F2FS-fs (mmcblk0p1): Mounted with checkpoint version = 2d6fc5b6
  880. [ 8.231710] EXT4-fs (mmcblk0p9): Ignoring removed nomblk_io_submit option
  881. [ 8.242873] EXT4-fs (mmcblk0p9): recovery complete
  882. [ 8.248406] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  883. [ 8.352307] EXT4-fs (mmcblk0p9): Ignoring removed nomblk_io_submit option
  884. [ 8.370637] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  885. [ 8.392650] FAT-fs (mmcblk0p16): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  886. [ 8.441294] FAT-fs (mmcblk0p16): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  887. [ 8.453246] init: 31 output lines suppressed due to ratelimiting
  888. [ 8.462968] zram0: detected capacity change from 0 to 268435456
  889. [ 8.500335] mkswap: Swapspace size: 262140k, UUID=95c186ba-ccb2-45e1-909e-d0cf40c03362
  890. [ 8.510042] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
  891. [ 8.567782] mali_kbase: loading out-of-tree module taints kernel.
  892. [ 8.569289] logd.auditd: start
  893. [ 8.569310] logd.klogd: 8481313031
  894. [ 8.598960] mali gpu: GPU identified as 0x0720 r1p1 status 0
  895. [ 8.605551] mali gpu: Protected mode not available
  896. [ 8.615486] mali gpu: Probed as mali0
  897. [ 8.623686] Registered IR keymap rc_map_sunxi
  898. [ 8.629296] input: sunxi-ir as /devices/platform/soc/s_cir0/rc/rc0/input1
  899. [ 8.637354] rc rc0: sunxi-ir as /devices/platform/soc/s_cir0/rc/rc0
  900. [ 9.345958] vdc: Waited 500ms for vold
  901. [ 9.431758] type=1400 audit(17.063:3): avc: denied { setattr } for pid=1265 comm="init" name="wifi" dev="mmcblk0p1" ino=30 scontext=u:r:vendor_init:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=1
  902. [ 9.455083] type=1400 audit(17.063:3): avc: denied { setattr } for pid=1265 comm="init" name="wifi" dev="mmcblk0p1" ino=30 scontext=u:r:vendor_init:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=1
  903. [ 9.476406] type=1400 audit(17.086:4): avc: denied { setattr } for pid=1265 comm="init" name="dhcp" dev="mmcblk0p1" ino=34 scontext=u:r:vendor_init:s0 tcontext=u:object_r:dhcp_data_file:s0 tclass=dir permissive=1
  904. [ 9.528721] logd.daemon: reinit
  905. [ 9.668073] CPU Budget hotplug: cluster0 min:4 max:4
  906. [ 9.675755] CPU Budget:update CPU0 cpufreq max to min 1488000~1488000
  907. [ 9.711636] type=1400 audit(17.086:4): avc: denied { setattr } for pid=1265 comm="init" name="dhcp" dev="mmcblk0p1" ino=34 scontext=u:r:vendor_init:s0 tcontext=u:object_r:dhcp_data_file:s0 tclass=dir permissive=1
  908. [ 9.747860] healthd: No battery devices found
  909. [ 9.756580] healthd: battery none chg=
  910. [ 9.757212] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
  911. [ 9.757216] audit: rate limit exceeded
  912. [ 9.776141] usbcore: registered new interface driver uvcvideo
  913. [ 9.776146] USB Video Class driver (1.1.1)
  914. [ 9.835129] file system registered
  915. [ 9.956232] sunxi-bt bt: set block: 0
  916. [ 9.956289] sunxi-bt bt: dummy supplies not allowed
  917. [ 9.956528] sunxi-bt bt: check bluetooth io_regulator voltage: 3300000
  918. [ 9.958678] healthd: No battery devices found
  919. [ 9.981185] sunxi-bt bt: set block: 1
  920. [ 9.981232] sunxi-bt bt: dummy supplies not allowed
  921. [ 9.997412] healthd: battery none chg=
  922. [ 10.201300] FD650: fd650_driver_init: FD650 Driver init.
  923. [ 10.201742] FD650: enter func:fd650_driver_probe
  924. [ 10.201866] FD650: fd628_clk_pin is 229
  925. [ 10.201866]
  926. [ 10.201871] FD650: fd628_dat_pin is 230
  927. [ 10.201871]
  928. [ 10.201872] FD650: gpio name is PH5, ret = 0
  929. [ 10.201874] FD650: gpio name is PH6, ret = 0
  930. [ 10.204183] FD650: NOTE: register_fd650_driver:::register fd650 driver success
  931. [ 10.353185] type=1400 audit(17.323:5): avc: denied { execute_no_trans } for pid=1788 comm="init" path="/system/bin/a.sh" dev="mmcblk0p5" ino=2324 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  932. [ 10.385877] type=1400 audit(17.323:5): avc: denied { execute_no_trans } for pid=1788 comm="init" path="/system/bin/a.sh" dev="mmcblk0p5" ino=2324 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  933. console:/ $ [ 10.405779] read descriptors
  934. [ 10.405791] read strings
  935. [ 10.418507] Do not support any basic 3d video format
  936. [ 10.418513] Do not support any basic 3d video format
  937. [ 10.418517] Do not support any basic 3d video format
  938. [ 10.516160] type=1400 audit(17.373:6): avc: granted { read } for pid=1787 comm="zndusid" name="sst_storage" dev="tmpfs" ino=2248 scontext=u:r:init:s0 tcontext=u:object_r:sst_storage_device:s0 tclass=chr_file
  939. [ 10.519403] init: starting service 'wificond'...
  940. [ 10.538454] init: Opened file '/d/mmc0/mmc0:0001/ext_csd', flags 0
  941. [ 10.542304] init: starting service 'vendor.media.omx'...
  942. [ 10.565537] init: starting service 'radio_monitor-daemon'...
  943. [ 10.632358] init: starting service 'vendor.ril-daemon'...
  944. [ 10.669806] init: Command 'class_start main' action=nonencrypted (/init.rc:713) took 306ms and succeeded
  945. [ 10.772299] init: Service 'fastinstall' (pid 1797) exited with status 0
  946. [ 10.816272] input: sunxi-ir-uinput as /devices/virtual/input/input2
  947. [ 10.821031] keychord: using input dev sunxi-ir-uinput for fevent
  948. [ 10.926893] init: Service 'zndreactivate' (pid 1863) exited with status 0
  949. [ 11.002457] init: starting service 'gatekeeperd'...
  950. [ 11.050433] init: starting service 'perfprofd'...
  951. [ 11.704133] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
  952. [ 12.173246] audit: audit_lost=42 audit_rate_limit=5 audit_backlog_limit=64
  953. [ 12.181237] audit: rate limit exceeded
  954. [ 13.362068] CPU Budget hotplug: cluster0 min:0 max:4
  955. [ 14.388818] healthd: battery none chg=
  956. [ 14.397453] healthd: battery none chg=
  957. [ 14.407260] healthd: battery none chg=
  958. [ 14.415044] healthd: battery none chg=
  959. [ 14.440521] healthd: battery none chg=
  960. [ 14.974561] type=1400 audit(19.800:57): avc: denied { write } for pid=2018 comm="idmap" name="resource-cache" dev="mmcblk0p1" ino=71 scontext=u:r:system_server:s0 tcontext=u:object_r:resourcecache_data_file:s0 tclass=dir permissive=1
  961. [ 14.998450] type=1400 audit(1230739200.443:61): avc: denied { write } for pid=2117 comm="getprop" path="pipe:[13876]" dev="pipefs" ino=13876 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=fifo_file permissive=1
  962. [ 15.021185] type=1400 audit(1230739200.443:61): avc: denied { write } for pid=2117 comm="getprop" path="pipe:[13876]" dev="pipefs" ino=13876 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=fifo_file permissive=1
  963. [ 15.043666] type=1400 audit(1230739200.483:62): avc: denied { getattr } for pid=2117 comm="getprop" path="pipe:[13876]" dev="pipefs" ino=13876 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=fifo_file permissive=1
  964. [ 15.069471] type=1400 audit(1230739200.483:62): avc: denied { getattr } for pid=2117 comm="getprop" path="pipe:[13876]" dev="pipefs" ino=13876 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=fifo_file permissive=1
  965. [ 15.091954] type=1400 audit(1230739200.506:63): avc: denied { write } for pid=2120 comm="setprop" name="property_service" dev="tmpfs" ino=7729 scontext=u:r:toolbox:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
  966. [ 15.116652] type=1400 audit(1230739200.506:63): avc: denied { write } for pid=2120 comm="setprop" name="property_service" dev="tmpfs" ino=7729 scontext=u:r:toolbox:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
  967. [ 15.140659] type=1400 audit(1230739200.506:64): avc: denied { connectto } for pid=2120 comm="setprop" path="/dev/socket/property_service" scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
  968. [ 15.198090] acc_open
  969. [ 15.200725] acc_release
  970. [ 15.479230] healthd: battery none chg=
  971. [ 15.496545] libphy: gmac0: probed
  972. [ 15.570732] sunxi-gmac gmac0 eth0: eth0: Type(6) PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
  973. [ 15.591648] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  974. [ 15.625899] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  975. [ 15.811189] sdcardfs version 2.0
  976. [ 15.815843] sdcardfs: dev_name -> /data/media
  977. [ 15.824219] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
  978. [ 15.838248] sdcardfs: mnt -> ffffffc0789a1520
  979. [ 15.856889] sdcardfs: mounted on top of /data/media type f2fs
  980. [ 15.880505] Remount options were mask=23,gid=9997 for vfsmnt ffffffc056bbaaa0.
  981. [ 15.914004] sdcardfs : options - debug:1
  982. [ 15.944184] type=1400 audit(1230739200.506:64): avc: denied { connectto } for pid=2120 comm="setprop" path="/dev/socket/property_service" scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
  983. [ 15.944234] type=1400 audit(1230739201.413:65): avc: denied { write } for pid=2264 comm="webview_zygote" path="socket:[15588]" dev="sockfs" ino=15588 scontext=u:r:webview_zygote:s0 tcontext=u:r:zygote:s0 tclass=unix_dgram_socket permissive=1
  984. [ 16.025263] sdcardfs : options - gid:9997
  985. [ 16.029888] sdcardfs : options - mask:23
  986. [ 16.034996] Remount options were mask=7,gid=9997 for vfsmnt ffffffc056a048e0.
  987. [ 16.043332] sdcardfs : options - debug:1
  988. [ 16.048049] sdcardfs : options - gid:9997
  989. [ 16.052598] sdcardfs : options - mask:7
  990. [ 16.172220] CPU Budget hotplug: cluster0 min:4 max:4
  991. [ 16.178871] CPU Budget:update CPU0 cpufreq max to min 1488000~1488000
  992. [ 16.335236] ======== XRADIO WIFI OPEN ========
  993. [ 16.346697] [XRADIO] Driver Label:XR_V02.15.54 Apr 16 2019 11:54:35
  994. [ 16.356131] [XRADIO] Allocated hw_priv @ ffffffc0531657a0
  995. [ 16.375453] sunxi-wlan wlan: bus_index: 1
  996. [ 16.513327] [XRADIO] Detect SDIO card 1
  997. [ 16.513376] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  998. [ 16.513490] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  999. [ 16.529563] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  1000. [ 16.551227] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  1001. [ 16.590285] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  1002. [ 16.631609] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
  1003. [ 16.647453] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
  1004. [ 16.660758] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
  1005. [ 16.675074] mmc2: new high speed SDIO card at address 0001
  1006. [ 16.687768] [SBUS] XRadio Device:sdio clk=50000000
  1007. [ 16.696048] [XRADIO] XRADIO_HW_REV 1.0 detected.
  1008. [ 16.812788] random: crng init done
  1009. [ 16.839930] [XRADIO] Bootloader complete
  1010. [ 17.027619] [XRADIO] Firmware completed.
  1011. [ 17.042207] [WSM] Firmware Label:XR_C01.08.52.58 Jul 19 2018 18:53:57
  1012. [ 17.052299] [XRADIO] Firmware Startup Done.
  1013. [ 17.127144] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  1014. [ 17.280647] init: Received control message 'start' for 'wpa_supplicant' from pid: 1905 (/system/bin/wificond)
  1015. [ 17.344094] init: starting service 'wpa_supplicant'...
  1016. [ 17.384951] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
  1017. [ 17.608586] sunxi-gmac gmac0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  1018. [ 17.634731] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1019. [ 17.768296] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0
  1020. [ 17.791712] [AP_WRN] BSS_CHANGED_ASSOC but driver is unjoined.
  1021. [ 17.875245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1022. [ 18.091434] selinux: avc: denied { set } for property=wlan.hardware.vendor pid=2499 uid=1010 gid=1010 scontext=u:r:hal_wifi_supplicant_default:s0 tcontext=u:object_r:wifi_prop:s0 tclass=property_service permissive=1
  1023. [ 18.091434]
  1024. [ 18.366250] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/init.rc:761)
  1025. [ 23.374831] Invalid sched_group_energy for CPU1
  1026. [ 23.380008] Invalid sched_group_energy for Cluster1
  1027. [ 23.388657] Invalid sched_group_energy for CPU0
  1028. [ 23.395070] Invalid sched_group_energy for Cluster0
  1029. [ 23.404393] CPU1: update max cpu_capacity 1024
  1030. [ 23.418609] CPU2: shutdown
  1031. [ 23.422281] psci: CPU2 killed.
  1032. [ 23.578213] Invalid sched_group_energy for CPU0
  1033. [ 23.585367] Invalid sched_group_energy for Cluster0
  1034. [ 23.608762] CPU1: shutdown
  1035. [ 23.611981] psci: CPU1 killed.
  1036. [ 25.967102] init: Service 'bootanim' (pid 1987) exited with status 0
  1037. [ 26.039423] BOOTEVENT: 26039.411149: OFF
  1038. [ 26.054260] init: processing action (sys.boot_completed=1) from (/init.rc:751)
  1039. [ 26.098215] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.device.rc:111)
  1040. [ 26.135731] init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) from (/system/etc/init/bootstat.rc:70)
  1041. [ 26.155917] init: starting service 'exec 3 (/system/bin/bootstat --set_system_boot_reason --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'...
  1042. [ 26.177878] init: processing action (sys.boot_completed=1) from (/system/etc/init/preinstall.rc:1)
  1043. [ 26.219203] Detected VIPT I-cache on CPU1
  1044. [ 26.219258] Invalid sched_group_energy for CPU1
  1045. [ 26.219260] CPU1: update cpu_capacity 1024
  1046. [ 26.219262] CPU1: Booted secondary processor [410fd034]
  1047. [ 26.268560] logd: logdr: UID=1000 GID=1007 PID=2585 n tail=0 logMask=80 pid=0 start=0ns timeout=0ns
  1048. [ 26.313535] init: starting service 'preinstall'...
  1049. [ 26.328130] Invalid sched_group_energy for CPU1
  1050. [ 26.328138] Invalid sched_group_energy for Cluster1
  1051. [ 26.328140] Invalid sched_group_energy for CPU0
  1052. [ 26.328143] Invalid sched_group_energy for Cluster0
  1053. [ 26.338310] CPU1: update max cpu_capacity 1024
  1054. [ 26.362105] type=1400 audit(1230739203.560:71): avc: denied { connectto } for pid=2499 comm="wpa_supplicant" path="/dev/socket/property_service" scontext=u:r:hal_wifi_supplicant_default:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
  1055. [ 26.366594] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=0) from (/system/etc/init/wifi-events.rc:20)
  1056. [ 26.433089] type=1400 audit(1561579391.950:72): avc: denied { execute_no_trans } for pid=2588 comm="init" path="/system/bin/preinstall.sh" dev="mmcblk0p5" ino=2101 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  1057. [ 26.449865] init: Command 'mkdir /sys/kernel/debug/tracing/instances/wifi 711' action=sys.boot_completed=1 && sys.wifitracing.started=0 (/system/etc/init/wifi-events.rc:22) took 83ms and succeeded
  1058. [ 26.455933] init: Service 'exec 3 (/system/bin/bootstat --set_system_boot_reason --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)' (pid 2585) exited with status 0
  1059. [ 26.499990] type=1400 audit(1561579391.950:72): avc: denied { execute_no_trans } for pid=2588 comm="init" path="/system/bin/preinstall.sh" dev="mmcblk0p5" ino=2101 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  1060. [ 26.527252] type=1400 audit(1561579392.003:73): avc: denied { write } for pid=2589 comm="getprop" path="pipe:[18472]" dev="pipefs" ino=18472 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=fifo_file permissive=1
  1061. [ 26.549865] type=1400 audit(1561579392.003:73): avc: denied { write } for pid=2589 comm="getprop" path="pipe:[18472]" dev="pipefs" ino=18472 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0 tclass=fifo_file permissive=1
  1062. [ 26.571437] audit: audit_lost=45 audit_rate_limit=5 audit_backlog_limit=64
  1063. [ 26.571441] audit: rate limit exceeded
  1064. [ 26.586332] type=1400 audit(1561579392.023:74): avc: denied { read } for pid=2589 comm="getprop" name="u:object_r:wifi_prop:s0" dev="tmpfs" ino=7718 scontext=u:r:toolbox:s0 tcontext=u:object_r:wifi_prop:s0 tclass=file permissive=1
  1065. [ 26.611621] type=1400 audit(1561579392.023:74): avc: denied { read } for pid=2589 comm="getprop" name="u:object_r:wifi_prop:s0" dev="tmpfs" ino=7718 [ 46.361482] Invalid sched_group_energy for CPU1
  1066. [ 46.366608] Invalid sched_group_energy for Cluster1
  1067. [ 46.372100] Invalid sched_group_energy for CPU0
  1068. [ 46.377393] Invalid sched_group_energy for Cluster0
  1069. [ 46.384667] CPU0: update max cpu_capacity 1024
  1070. [ 46.398434] CPU2: shutdown
  1071. [ 46.401561] psci: CPU2 killed.
  1072. [ 47.779440] Detected VIPT I-cache on CPU2
  1073. [ 47.779491] Invalid sched_group_energy for CPU2
  1074. [ 47.779494] CPU2: update cpu_capacity 1024
  1075. [ 47.779496] CPU2: Booted secondary processor [410fd034]
  1076. [ 47.811518] Invalid sched_group_energy for CPU2
  1077. [ 47.816649] Invalid sched_group_energy for Cluster2
  1078. [ 47.822144] Invalid sched_group_energy for CPU1
  1079. [ 47.827259] Invalid sched_group_energy for Cluster1
  1080. [ 47.832763] Invalid sched_group_energy for CPU0
  1081. [ 47.837864] Invalid sched_group_energy for Cluster0
  1082. [ 47.843516] CPU2: update max cpu_capacity 1024
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!