daily pastebin goal
74%
SHARE
TWEET

Error1

a guest May 31st, 2013 72 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2)
  4. [    0.000000] KERNEL supported cpus:
  5. [    0.000000]   Intel GenuineIntel
  6. [    0.000000]   AMD AuthenticAMD
  7. [    0.000000]   NSC Geode by NSC
  8. [    0.000000]   Cyrix CyrixInstead
  9. [    0.000000]   Centaur CentaurHauls
  10. [    0.000000]   Transmeta GenuineTMx86
  11. [    0.000000]   Transmeta TransmetaCPU
  12. [    0.000000]   UMC UMC UMC UMC
  13. [    0.000000] BIOS-provided physical RAM map:
  14. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  15. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  16. [    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
  17. [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
  18. [    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
  19. [    0.000000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
  20. [    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
  21. [    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
  22. [    0.000000] DMI 2.3 present.
  23. [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
  24. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  25. [    0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
  26. [    0.000000] MTRR default type: uncachable
  27. [    0.000000] MTRR fixed ranges enabled:
  28. [    0.000000]   00000-9FFFF write-back
  29. [    0.000000]   A0000-DFFFF uncachable
  30. [    0.000000]   E0000-EFFFF write-through
  31. [    0.000000]   F0000-FFFFF write-protect
  32. [    0.000000] MTRR variable ranges enabled:
  33. [    0.000000]   0 base 000000000 mask FC0000000 write-back
  34. [    0.000000]   1 disabled
  35. [    0.000000]   2 disabled
  36. [    0.000000]   3 disabled
  37. [    0.000000]   4 disabled
  38. [    0.000000]   5 disabled
  39. [    0.000000]   6 disabled
  40. [    0.000000]   7 disabled
  41. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  42. [    0.000000] Scanning 0 areas for low memory corruption
  43. [    0.000000] modified physical RAM map:
  44. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  45. [    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
  46. [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
  47. [    0.000000]  modified: 00000000000e8000 - 0000000000100000 (reserved)
  48. [    0.000000]  modified: 0000000000100000 - 000000003ffb0000 (usable)
  49. [    0.000000]  modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
  50. [    0.000000]  modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
  51. [    0.000000]  modified: 000000003fff0000 - 0000000040000000 (reserved)
  52. [    0.000000]  modified: 00000000ffb80000 - 0000000100000000 (reserved)
  53. [    0.000000] initial memory mapped : 0 - 00c00000
  54. [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  55. [    0.000000] Using x86 segment limits to approximate NX protection
  56. [    0.000000]  0000000000 - 0000400000 page 4k
  57. [    0.000000]  0000400000 - 0037400000 page 2M
  58. [    0.000000]  0037400000 - 00377fe000 page 4k
  59. [    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
  60. [    0.000000] RAMDISK: 2f37d000 - 30003c45
  61. [    0.000000] ACPI: RSDP 000fad60 00014 (v00 ACPIAM)
  62. [    0.000000] ACPI: RSDT 3ffb0000 00030 (v01 A M I  OEMRSDT  12000513 MSFT 00000097)
  63. [    0.000000] ACPI: FACP 3ffb0200 00081 (v02 A M I  OEMFACP  12000513 MSFT 00000097)
  64. [    0.000000] ACPI: DSDT 3ffb03f0 03763 (v01  A0049 A0049000 00000000 INTL 02002026)
  65. [    0.000000] ACPI: FACS 3ffc0000 00040
  66. [    0.000000] ACPI: APIC 3ffb0390 0005C (v01 A M I  OEMAPIC  12000513 MSFT 00000097)
  67. [    0.000000] ACPI: OEMB 3ffc0040 0003F (v01 A M I  OEMBIOS  12000513 MSFT 00000097)
  68. [    0.000000] ACPI: Local APIC address 0xfee00000
  69. [    0.000000] 135MB HIGHMEM available.
  70. [    0.000000] 887MB LOWMEM available.
  71. [    0.000000]   mapped low ram: 0 - 377fe000
  72. [    0.000000]   low ram: 0 - 377fe000
  73. [    0.000000]   node 0 low ram: 00000000 - 377fe000
  74. [    0.000000]   node 0 bootmap 00011000 - 00017f00
  75. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  76. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  77. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  78. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  79. [    0.000000]   #3 [0000100000 - 00008b0db8]    TEXT DATA BSS ==> [0000100000 - 00008b0db8]
  80. [    0.000000]   #4 [002f37d000 - 0030003c45]          RAMDISK ==> [002f37d000 - 0030003c45]
  81. [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  82. [    0.000000]   #6 [00008b1000 - 00008b4204]              BRK ==> [00008b1000 - 00008b4204]
  83. [    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  84. [    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
  85. [    0.000000] found SMP MP-table at [c00ff780] ff780
  86. [    0.000000] Zone PFN ranges:
  87. [    0.000000]   DMA      0x00000010 -> 0x00001000
  88. [    0.000000]   Normal   0x00001000 -> 0x000377fe
  89. [    0.000000]   HighMem  0x000377fe -> 0x0003ffb0
  90. [    0.000000] Movable zone start PFN for each node
  91. [    0.000000] early_node_map[2] active PFN ranges
  92. [    0.000000]     0: 0x00000010 -> 0x0000009f
  93. [    0.000000]     0: 0x00000100 -> 0x0003ffb0
  94. [    0.000000] On node 0 totalpages: 261951
  95. [    0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001200
  96. [    0.000000]   DMA zone: 32 pages used for memmap
  97. [    0.000000]   DMA zone: 0 pages reserved
  98. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
  99. [    0.000000]   Normal zone: 1744 pages used for memmap
  100. [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
  101. [    0.000000]   HighMem zone: 272 pages used for memmap
  102. [    0.000000]   HighMem zone: 34466 pages, LIFO batch:7
  103. [    0.000000] Using APIC driver default
  104. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  105. [    0.000000] ACPI: Local APIC address 0xfee00000
  106. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  107. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  108. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  109. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  110. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  111. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  112. [    0.000000] ACPI: IRQ0 used by override.
  113. [    0.000000] ACPI: IRQ2 used by override.
  114. [    0.000000] ACPI: IRQ9 used by override.
  115. [    0.000000] Using ACPI (MADT) for SMP configuration information
  116. [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  117. [    0.000000] nr_irqs_gsi: 24
  118. [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
  119. [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
  120. [    0.000000] PERCPU: Embedded 24 pages/cpu @c1c00000 s74936 r0 d23368 u2097152
  121. [    0.000000] pcpu-alloc: s74936 r0 d23368 u2097152 alloc=1*4194304
  122. [    0.000000] pcpu-alloc: [0] 0 1
  123. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259903
  124. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=91ffe5bb-5370-4b74-84d2-99aa63fa14dc ro quiet splash
  125. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  126. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  127. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  128. [    0.000000] Enabling fast FPU save and restore... done.
  129. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  130. [    0.000000] Initializing CPU#0
  131. [    0.000000] allocated 5240960 bytes of page_cgroup
  132. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  133. [    0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
  134. [    0.000000] Memory: 1012112k/1048256k available (4539k kernel code, 35048k reserved, 1928k data, 620k init, 138952k highmem)
  135. [    0.000000] virtual kernel memory layout:
  136. [    0.000000]     fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
  137. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  138. [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
  139. [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
  140. [    0.000000]       .init : 0xc0751000 - 0xc07ec000   ( 620 kB)
  141. [    0.000000]       .data : 0xc056ecbc - 0xc0750e68   (1928 kB)
  142. [    0.000000]       .text : 0xc0100000 - 0xc056ecbc   (4539 kB)
  143. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  144. [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  145. [    0.000000] Hierarchical RCU implementation.
  146. [    0.000000] NR_IRQS:2304 nr_irqs:424
  147. [    0.000000] I-pipe 2.6-03: pipeline enabled.
  148. [    0.000000] Console: colour VGA+ 80x25
  149. [    0.000000] console [tty0] enabled
  150. [    0.000000] Fast TSC calibration using PIT
  151. [    0.000000] Detected 3006.890 MHz processor.
  152. [    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.78 BogoMIPS (lpj=12027560)
  153. [    0.004030] Security Framework initialized
  154. [    0.004057] AppArmor: AppArmor initialized
  155. [    0.004067] Mount-cache hash table entries: 512
  156. [    0.004252] Initializing cgroup subsys ns
  157. [    0.004260] Initializing cgroup subsys cpuacct
  158. [    0.004265] Initializing cgroup subsys memory
  159. [    0.004276] Initializing cgroup subsys devices
  160. [    0.004279] Initializing cgroup subsys freezer
  161. [    0.004283] Initializing cgroup subsys net_cls
  162. [    0.004317] CPU: Trace cache: 12K uops, L1 D cache: 16K
  163. [    0.004322] CPU: L2 cache: 1024K
  164. [    0.004326] CPU: Physical Processor ID: 0
  165. [    0.004329] CPU: Processor Core ID: 0
  166. [    0.004334] mce: CPU supports 4 MCE banks
  167. [    0.004348] CPU0: Thermal monitoring enabled (TM1)
  168. [    0.004362] Performance Events: no PMU driver, software events only.
  169. [    0.004371] Checking 'hlt' instruction... OK.
  170. [    0.021254] ACPI: Core revision 20090903
  171. [    0.030572] ftrace: converting mcount calls to 0f 1f 44 00 00
  172. [    0.030580] ftrace: allocating 21003 entries in 42 pages
  173. [    0.045546] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  174. [    0.045845] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  175. [    0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
  176. [    0.048001] ...trying to set up timer (IRQ0) through the 8259A ...
  177. [    0.048001] ..... (found apic 0 pin 2) ...
  178. [    0.089243] ....... works.
  179. [    0.089246] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
  180. [    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
  181. [    0.008000] Initializing CPU#1
  182. [    0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K
  183. [    0.008000] CPU: L2 cache: 1024K
  184. [    0.008000] CPU: Physical Processor ID: 0
  185. [    0.008000] CPU: Processor Core ID: 0
  186. [    0.008000] CPU1: Thermal monitoring enabled (TM1)
  187. [    0.176105] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
  188. [    0.176122] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  189. [    0.180027] Brought up 2 CPUs
  190. [    0.180033] Total of 2 processors activated (12027.82 BogoMIPS).
  191. [    0.180331] CPU0 attaching sched-domain:
  192. [    0.180338]  domain 0: span 0-1 level SIBLING
  193. [    0.180343]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
  194. [    0.180353]   domain 1: span 0-1 level MC
  195. [    0.180357]    groups: 0-1 (cpu_power = 1178)
  196. [    0.180368] CPU1 attaching sched-domain:
  197. [    0.180371]  domain 0: span 0-1 level SIBLING
  198. [    0.180375]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
  199. [    0.180384]   domain 1: span 0-1 level MC
  200. [    0.180388]    groups: 0-1 (cpu_power = 1178)
  201. [    0.180552] devtmpfs: initialized
  202. [    0.180552] regulator: core version 0.5
  203. [    0.180552] NET: Registered protocol family 16
  204. [    0.180552] Trying to unpack rootfs image as initramfs...
  205. [    0.180552] EISA bus registered
  206. [    0.180552] ACPI: bus type pci registered
  207. [    0.180566] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
  208. [    0.180572] PCI: Using configuration type 1 for base access
  209. [    0.182504] bio: create slab <bio-0> at 0
  210. [    0.185215] ACPI: EC: Look up EC in DSDT
  211. [    0.191442] ACPI: Executed 1 blocks of module-level executable AML code
  212. [    0.199253] ACPI: Interpreter enabled
  213. [    0.199259] ACPI: (supports S0 S5)
  214. [    0.199284] ACPI: Using IOAPIC for interrupt routing
  215. [    0.215506] ACPI Warning: Incorrect checksum in table [OEMB] - 01, should be F2 (20090903/tbutils-314)
  216. [    0.215709] ACPI: No dock devices found.
  217. [    0.215973] ACPI: PCI Root Bridge [PCI0] (0000:00)
  218. [    0.216069] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
  219. [    0.216086] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
  220. [    0.216220] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
  221. [    0.216351] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f]
  222. [    0.216437] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f]
  223. [    0.216516] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f]
  224. [    0.216596] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f]
  225. [    0.216680] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fffc00-0xf7ffffff]
  226. [    0.216758] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  227. [    0.216767] pci 0000:00:1d.7: PME# disabled
  228. [    0.216891] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
  229. [    0.216900] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
  230. [    0.216938] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
  231. [    0.216953] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
  232. [    0.216966] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
  233. [    0.216978] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
  234. [    0.216991] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
  235. [    0.217007] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
  236. [    0.217085] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
  237. [    0.217152] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff]
  238. [    0.217165] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf]
  239. [    0.217180] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf7fff800-0xf7fff9ff]
  240. [    0.217192] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf7fff400-0xf7fff4ff]
  241. [    0.217238] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  242. [    0.217248] pci 0000:00:1f.5: PME# disabled
  243. [    0.217312] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
  244. [    0.217324] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff]
  245. [    0.217337] pci 0000:01:00.0: reg 18 32bit mmio: [0xf5000000-0xf5ffffff]
  246. [    0.217363] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7de0000-0xf7dfffff]
  247. [    0.217452] pci 0000:00:01.0: bridge 32bit mmio: [0xf3d00000-0xf7dfffff]
  248. [    0.217461] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd3c00000-0xf3bfffff]
  249. [    0.217535] pci 0000:02:05.0: reg 10 32bit mmio: [0xf7efc000-0xf7efffff]
  250. [    0.217548] pci 0000:02:05.0: reg 14 io port: [0xd800-0xd8ff]
  251. [    0.217584] pci 0000:02:05.0: reg 30 32bit mmio pref: [0xf7ec0000-0xf7edffff]
  252. [    0.217619] pci 0000:02:05.0: supports D1 D2
  253. [    0.217625] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
  254. [    0.217633] pci 0000:02:05.0: PME# disabled
  255. [    0.217676] pci 0000:02:09.0: reg 10 io port: [0xdff0-0xdff7]
  256. [    0.217691] pci 0000:02:09.0: reg 14 io port: [0xdfe0-0xdfe7]
  257. [    0.217702] pci 0000:02:09.0: reg 18 io port: [0xdfa8-0xdfaf]
  258. [    0.217713] pci 0000:02:09.0: reg 1c io port: [0xdfa0-0xdfa7]
  259. [    0.217724] pci 0000:02:09.0: reg 20 io port: [0xdf98-0xdf9f]
  260. [    0.217735] pci 0000:02:09.0: reg 24 io port: [0xdf80-0xdf8f]
  261. [    0.217792] pci 0000:02:0a.0: reg 10 32bit mmio: [0xf7efbc00-0xf7efbc7f]
  262. [    0.217804] pci 0000:02:0a.0: reg 14 io port: [0xdc00-0xdc7f]
  263. [    0.217816] pci 0000:02:0a.0: reg 18 io port: [0xd400-0xd4ff]
  264. [    0.217828] pci 0000:02:0a.0: reg 1c io port: [0xd000-0xd0ff]
  265. [    0.217839] pci 0000:02:0a.0: reg 20 32bit mmio: [0xf7ee0000-0xf7eeffff]
  266. [    0.217851] pci 0000:02:0a.0: reg 24 32bit mmio: [0xf7eb0000-0xf7ebffff]
  267. [    0.217922] pci 0000:00:1e.0: transparent bridge
  268. [    0.217931] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
  269. [    0.217939] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
  270. [    0.217961] pci_bus 0000:00: on NUMA node 0
  271. [    0.217971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  272. [    0.218163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  273. [    0.232470] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  274. [    0.232671] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  275. [    0.232870] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  276. [    0.233065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  277. [    0.233259] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  278. [    0.233467] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  279. [    0.233661] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  280. [    0.233863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  281. [    0.234099] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  282. [    0.234109] vgaarb: loaded
  283. [    0.234360] SCSI subsystem initialized
  284. [    0.234553] libata version 3.00 loaded.
  285. [    0.234699] usbcore: registered new interface driver usbfs
  286. [    0.234726] usbcore: registered new interface driver hub
  287. [    0.234778] usbcore: registered new device driver usb
  288. [    0.235053] ACPI: WMI: Mapper loaded
  289. [    0.235059] PCI: Using ACPI for IRQ routing
  290. [    0.235336] NetLabel: Initializing
  291. [    0.235341] NetLabel:  domain hash size = 128
  292. [    0.235345] NetLabel:  protocols = UNLABELED CIPSOv4
  293. [    0.235371] NetLabel:  unlabeled traffic allowed by default
  294. [    0.235443] Switching to clocksource tsc
  295. [    0.236004] AppArmor: AppArmor Filesystem Enabled
  296. [    0.236026] pnp: PnP ACPI init
  297. [    0.236065] ACPI: bus type pnp registered
  298. [    0.245036] pnp: PnP ACPI: found 15 devices
  299. [    0.245042] ACPI: ACPI bus type pnp unregistered
  300. [    0.245051] ASUS P4P800 detected. Disabling PnPBIOS
  301. [    0.245055] PnPBIOS: Disabled
  302. [    0.245084] system 00:0b: ioport range 0x680-0x6ff has been reserved
  303. [    0.245091] system 00:0b: ioport range 0x290-0x297 has been reserved
  304. [    0.245105] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
  305. [    0.245112] system 00:0c: ioport range 0x800-0x87f has been reserved
  306. [    0.245118] system 00:0c: ioport range 0x480-0x4bf has been reserved
  307. [    0.245126] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
  308. [    0.245133] system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved
  309. [    0.245147] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
  310. [    0.245153] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
  311. [    0.245167] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
  312. [    0.245174] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
  313. [    0.245180] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
  314. [    0.245187] system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved
  315. [    0.245194] system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved
  316. [    0.280092] pci 0000:02:05.0: BAR 6: address space collision on of device [0xf7ec0000-0xf7edffff]
  317. [    0.280129] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  318. [    0.280134] pci 0000:00:01.0:   IO window: disabled
  319. [    0.280143] pci 0000:00:01.0:   MEM window: 0xf3d00000-0xf7dfffff
  320. [    0.280151] pci 0000:00:01.0:   PREFETCH window: 0xd3c00000-0xf3bfffff
  321. [    0.280165] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
  322. [    0.280173] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
  323. [    0.280183] pci 0000:00:1e.0:   MEM window: 0xf7e00000-0xf7efffff
  324. [    0.280192] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x400fffff
  325. [    0.280219] pci 0000:00:1e.0: setting latency timer to 64
  326. [    0.280228] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  327. [    0.280233] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  328. [    0.280239] pci_bus 0000:01: resource 1 mem: [0xf3d00000-0xf7dfffff]
  329. [    0.280245] pci_bus 0000:01: resource 2 pref mem [0xd3c00000-0xf3bfffff]
  330. [    0.280252] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
  331. [    0.280258] pci_bus 0000:02: resource 1 mem: [0xf7e00000-0xf7efffff]
  332. [    0.280264] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff]
  333. [    0.280270] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
  334. [    0.280275] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
  335. [    0.280348] NET: Registered protocol family 2
  336. [    0.280552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  337. [    0.281216] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  338. [    0.281939] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  339. [    0.282456] TCP: Hash tables configured (established 131072 bind 65536)
  340. [    0.282462] TCP reno registered
  341. [    0.282664] NET: Registered protocol family 1
  342. [    0.282839] pci 0000:01:00.0: Boot video device
  343. [    0.283245] Scanning for low memory corruption every 60 seconds
  344. [    0.283429] audit: initializing netlink socket (disabled)
  345. [    0.283456] type=2000 audit(1370018075.280:1): initialized
  346. [    0.294099] highmem bounce pool size: 64 pages
  347. [    0.294111] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  348. [    0.297379] VFS: Disk quotas dquot_6.5.2
  349. [    0.297511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  350. [    0.298804] fuse init (API version 7.13)
  351. [    0.298996] msgmni has been set to 1706
  352. [    0.299434] alg: No test for stdrng (krng)
  353. [    0.299556] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  354. [    0.299563] io scheduler noop registered
  355. [    0.299567] io scheduler anticipatory registered
  356. [    0.299572] io scheduler deadline registered
  357. [    0.299661] io scheduler cfq registered (default)
  358. [    0.299908] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  359. [    0.299963] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  360. [    0.300119] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  361. [    0.300127] ACPI: Power Button [PWRB]
  362. [    0.300247] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  363. [    0.300253] ACPI: Power Button [PWRF]
  364. [    0.303419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  365. [    0.303540] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  366. [    0.303668] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  367. [    0.304193] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  368. [    0.304400] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  369. [    0.306827] brd: module loaded
  370. [    0.307890] loop: module loaded
  371. [    0.308079] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  372. [    0.308285] ata_piix 0000:00:1f.1: version 2.13
  373. [    0.308304] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
  374. [    0.308317]   alloc irq_desc for 18 on node -1
  375. [    0.308323]   alloc kstat_irqs on node -1
  376. [    0.308335] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  377. [    0.308404] ata_piix 0000:00:1f.1: setting latency timer to 64
  378. [    0.308583] scsi0 : ata_piix
  379. [    0.308761] scsi1 : ata_piix
  380. [    0.308773] isapnp: Scanning for PnP cards...
  381. [    0.312175] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
  382. [    0.312181] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
  383. [    0.312876] Fixed MDIO Bus: probed
  384. [    0.312945] PPP generic driver version 2.4.2
  385. [    0.313025] tun: Universal TUN/TAP device driver, 1.6
  386. [    0.313029] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  387. [    0.313193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  388. [    0.313224]   alloc irq_desc for 23 on node -1
  389. [    0.313229]   alloc kstat_irqs on node -1
  390. [    0.313238] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
  391. [    0.313262] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  392. [    0.313268] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  393. [    0.313328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  394. [    0.313369] ehci_hcd 0000:00:1d.7: debug port 1
  395. [    0.317273] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
  396. [    0.317343] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fffc00
  397. [    0.332726] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  398. [    0.332927] usb usb1: configuration #1 chosen from 1 choice
  399. [    0.332988] hub 1-0:1.0: USB hub found
  400. [    0.333005] hub 1-0:1.0: 8 ports detected
  401. [    0.333128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  402. [    0.333160] uhci_hcd: USB Universal Host Controller Interface driver
  403. [    0.333228]   alloc irq_desc for 16 on node -1
  404. [    0.333232]   alloc kstat_irqs on node -1
  405. [    0.333245] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  406. [    0.333259] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  407. [    0.333265] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  408. [    0.333327] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  409. [    0.333370] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
  410. [    0.333533] usb usb2: configuration #1 chosen from 1 choice
  411. [    0.333582] hub 2-0:1.0: USB hub found
  412. [    0.333595] hub 2-0:1.0: 2 ports detected
  413. [    0.333674]   alloc irq_desc for 19 on node -1
  414. [    0.333678]   alloc kstat_irqs on node -1
  415. [    0.333687] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  416. [    0.333697] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  417. [    0.333703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  418. [    0.333760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  419. [    0.333795] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
  420. [    0.333957] usb usb3: configuration #1 chosen from 1 choice
  421. [    0.334006] hub 3-0:1.0: USB hub found
  422. [    0.334019] hub 3-0:1.0: 2 ports detected
  423. [    0.334091] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  424. [    0.334101] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  425. [    0.334107] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  426. [    0.334172] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  427. [    0.334207] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
  428. [    0.334366] usb usb4: configuration #1 chosen from 1 choice
  429. [    0.334414] hub 4-0:1.0: USB hub found
  430. [    0.334426] hub 4-0:1.0: 2 ports detected
  431. [    0.334499] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  432. [    0.334508] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  433. [    0.334514] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  434. [    0.334578] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  435. [    0.334604] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
  436. [    0.334768] usb usb5: configuration #1 chosen from 1 choice
  437. [    0.334817] hub 5-0:1.0: USB hub found
  438. [    0.334831] hub 5-0:1.0: 2 ports detected
  439. [    0.335009] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  440. [    0.341238] serio: i8042 KBD port at 0x60,0x64 irq 1
  441. [    0.341251] serio: i8042 AUX port at 0x60,0x64 irq 12
  442. [    0.341495] mice: PS/2 mouse device common for all mice
  443. [    0.341699] rtc_cmos 00:02: RTC can wake from S4
  444. [    0.341772] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  445. [    0.341799] rtc0: alarms up to one month, 114 bytes nvram
  446. [    0.342027] device-mapper: uevent: version 1.0.3
  447. [    0.360392] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  448. [    0.365068] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  449. [    0.416825] device-mapper: multipath: version 1.1.0 loaded
  450. [    0.416833] device-mapper: multipath round-robin: version 1.0.0 loaded
  451. [    0.451959] EISA: Probing bus 0 at eisa.0
  452. [    0.452006] EISA: Detected 0 cards.
  453. [    0.452011] cpuidle: using governor ladder
  454. [    0.452015] cpuidle: using governor menu
  455. [    0.452849] TCP cubic registered
  456. [    0.453099] NET: Registered protocol family 10
  457. [    0.453946] lo: Disabled Privacy Extensions
  458. [    0.454580] NET: Registered protocol family 17
  459. [    0.454628] Using IPI No-Shortcut mode
  460. [    0.454808] registered taskstats version 1
  461. [    0.455175] rtc_cmos 00:02: setting system clock to 2013-05-31 16:34:35 UTC (1370018075)
  462. [    0.455181] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  463. [    0.455185] EDD information not available.
  464. [    0.500985] ata2.00: ATAPI: SONY    DVD-ROM DDU1615, GYS4, max UDMA/66
  465. [    0.501032] ata2.00: limited to UDMA/33 due to 40-wire cable
  466. [    0.525058] ata2.00: configured for UDMA/33
  467. [    0.541296] ata1.00: ATA-6: ST340014A, 8.16, max UDMA/100
  468. [    0.541303] ata1.00: 78125000 sectors, multi 16: LBA48
  469. [    0.541344] ata1.00: limited to UDMA/33 due to 40-wire cable
  470. [    0.557216] ata1.00: configured for UDMA/33
  471. [    0.669440] isapnp: No Plug & Play device found
  472. [    0.669724] scsi 0:0:0:0: Direct-Access     ATA      ST340014A        8.16 PQ: 0 ANSI: 5
  473. [    0.670035] sd 0:0:0:0: Attached scsi generic sg0 type 0
  474. [    0.670314] sd 0:0:0:0: [sda] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB)
  475. [    0.670448] sd 0:0:0:0: [sda] Write Protect is off
  476. [    0.670456] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  477. [    0.670517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  478. [    0.670851]  sda:
  479. [    0.671208] scsi 1:0:0:0: CD-ROM            SONY     DVD-ROM DDU1615  GYS4 PQ: 0 ANSI: 5
  480. [    0.675075] sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
  481. [    0.675081] Uniform CD-ROM driver Revision: 3.20
  482. [    0.675238] sr 1:0:0:0: Attached scsi CD-ROM sr0
  483. [    0.675326] sr 1:0:0:0: Attached scsi generic sg1 type 5
  484. [    0.683281] Freeing initrd memory: 12827k freed
  485. [    0.692210]  sda1 sda2 < sda5 >
  486. [    0.719135] sd 0:0:0:0: [sda] Attached SCSI disk
  487. [    0.719164] Freeing unused kernel memory: 620k freed
  488. [    0.719842] Write protecting the kernel text: 4540k
  489. [    0.719891] Write protecting the kernel read-only data: 1668k
  490. [    0.751701] udev: starting version 151
  491. [    0.950396] Floppy drive(s): fd0 is 1.44M
  492. [    0.972170] FDC 0 is a post-1991 82077
  493. [    0.984565]   alloc irq_desc for 22 on node -1
  494. [    0.984572]   alloc kstat_irqs on node -1
  495. [    0.984587] skge 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  496. [    0.984677] skge 1.13 addr 0xf7efc000 irq 22 chip Yukon-Lite rev 9
  497. [    0.986051] skge eth0: addr 00:11:d8:da:16:03
  498. [    0.986623] Linux agpgart interface v0.103
  499. [    0.993394] agpgart-intel 0000:00:00.0: Intel 865 Chipset
  500. [    0.997054] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
  501. [    1.113628] [drm] Initialized drm 1.1.0 20060810
  502. [    1.155002] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  503. [    1.157951] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04a100a1)
  504. [    1.158274] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
  505. [    1.451127] [drm] nouveau 0000:01:00.0: ... appears to be valid
  506. [    1.451134] [drm] nouveau 0000:01:00.0: BIT BIOS found
  507. [    1.451138] [drm] nouveau 0000:01:00.0: Bios version 05.44.a2.14
  508. [    1.451144] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
  509. [    1.451148] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
  510. [    1.451153] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2
  511. [    1.451157] [drm] nouveau 0000:01:00.0:   0: 0x00000200: type 0x00 idx 2 tag 0xff
  512. [    1.451162] [drm] nouveau 0000:01:00.0:   1: 0x00002030: type 0x30 idx 0 tag 0x08
  513. [    1.451166] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01001300 00000028
  514. [    1.451170] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00000028
  515. [    1.451174] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01001302 00000000
  516. [    1.451183] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDE7B
  517. [    1.456341] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE169
  518. [    1.516220] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6A3
  519. [    1.516240] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE801
  520. [    1.524133] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE98A
  521. [    1.542652] [TTM] Zone  kernel: Available graphics memory: 443626 kiB.
  522. [    1.542657] [TTM] Zone highmem: Available graphics memory: 513102 kiB.
  523. [    1.542672] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
  524. [    1.542729] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
  525. [    1.542747] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
  526. [    1.542758] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
  527. [    1.542810] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
  528. [    1.542835] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
  529. [    1.543428] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
  530. [    1.545117] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
  531. [    1.545131] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
  532. [    1.545141] [drm] nouveau 0000:01:00.0: Saving VGA fonts
  533. [    1.608876] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
  534. [    1.609091] [drm] nouveau 0000:01:00.0: Detected a VGA connector
  535. [    1.610935] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
  536. [    1.610940] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
  537. [    1.610945] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
  538. [    1.768240] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f6982400
  539. [    1.768348] fb0: nouveaufb frame buffer device
  540. [    1.768353] registered panic notifier
  541. [    1.768364] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
  542. [    1.771032] vga16fb: initializing
  543. [    1.771040] vga16fb: mapped to 0xc00a0000
  544. [    1.771048] vga16fb: not registering due to another framebuffer present
  545. [    1.791681] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
  546. [    1.791688] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B
  547. [    1.795580] Console: switching to colour frame buffer device 160x64
  548. [    2.179345] xor: automatically using best checksumming function: pIII_sse
  549. [    2.197006]    pIII_sse  :  4776.000 MB/sec
  550. [    2.197012] xor: using function: pIII_sse (4776.000 MB/sec)
  551. [    2.200993] device-mapper: dm-raid45: initialized v0.2594b
  552. [    2.402116] EXT4-fs (sda1): mounted filesystem with ordered data mode
  553. [   13.392403] Adding 1648632k swap on /dev/sda5.  Priority:-1 extents:1 across:1648632k
  554. [   13.410464] udev: starting version 151
  555. [   13.687171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  556. [   13.744137] lp: driver loaded but no devices found
  557. [   13.756182] intel_rng: FWH not detected
  558. [   13.822145] parport_pc 00:0a: reported by Plug and Play ACPI
  559. [   13.822197] parport0: PC-style at 0x378, irq 7 [PCSPP]
  560. [   13.826528] udev: renamed network interface eth0 to eth1
  561. [   13.864840] arcnet loaded.
  562. [   13.868617] arcnet: COM20020 chipset support (by David Woodhouse et al.)
  563. [   13.870445] arcnet: COM20020 PCI support
  564. [   13.870499] com20020 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  565. [   13.870509]  arc%d: SOHARD
  566. [   13.870521] com20020: probe of 0000:02:0a.0 failed with error -16
  567. [   13.913527] lp0: using parport0 (interrupt-driven).
  568. [   13.913912]   alloc irq_desc for 21 on node -1
  569. [   13.913918]   alloc kstat_irqs on node -1
  570. [   13.913932] parport_pc 0000:02:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  571. [   13.913940] PCI parallel port detected: 9710:9805, I/O at 0xdff0(0xdfe0), IRQ 21
  572. [   13.913984] parport1: PC-style at 0xdff0 (0xdfe0), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
  573. [   13.925411] psmouse serio1: ID: 10 00 64
  574. [   13.933887] ppdev: user-space parallel port driver
  575. [   14.014539] lp1: using parport1 (interrupt-driven).
  576. [   14.050460] type=1505 audit(1370018089.092:2):  operation="profile_load" pid=585 name="/sbin/dhclient3"
  577. [   14.051318] type=1505 audit(1370018089.092:3):  operation="profile_load" pid=585 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  578. [   14.051803] type=1505 audit(1370018089.092:4):  operation="profile_load" pid=585 name="/usr/lib/connman/scripts/dhclient-script"
  579. [   14.054171] type=1505 audit(1370018089.096:5):  operation="profile_replace" pid=594 name="/sbin/dhclient3"
  580. [   14.055065] type=1505 audit(1370018089.096:6):  operation="profile_replace" pid=594 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  581. [   14.057084] type=1505 audit(1370018089.100:7):  operation="profile_replace" pid=594 name="/usr/lib/connman/scripts/dhclient-script"
  582. [   14.181280]   alloc irq_desc for 17 on node -1
  583. [   14.181288]   alloc kstat_irqs on node -1
  584. [   14.181301] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  585. [   14.181367] Intel ICH 0000:00:1f.5: setting latency timer to 64
  586. [   14.552694] intel8x0: white list rate for 1043:80f3 is 48000
  587. [   14.574916] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
  588. [   14.672739] type=1505 audit(1370018089.716:8):  operation="profile_load" pid=730 name="/usr/share/gdm/guest-session/Xsession"
  589. [   14.681946] type=1505 audit(1370018089.724:9):  operation="profile_replace" pid=731 name="/sbin/dhclient3"
  590. [   14.682884] type=1505 audit(1370018089.724:10):  operation="profile_replace" pid=731 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  591. [   14.683390] type=1505 audit(1370018089.724:11):  operation="profile_replace" pid=731 name="/usr/lib/connman/scripts/dhclient-script"
  592. [   14.783602] skge eth1: enabling interface
  593. [   14.787280] ADDRCONF(NETDEV_UP): eth1: link is not ready
  594. [   15.447884] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
  595. [   15.449831] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
  596. [   15.783008] CPU0 attaching NULL sched-domain.
  597. [   15.783021] CPU1 attaching NULL sched-domain.
  598. [   15.809084] CPU0 attaching sched-domain:
  599. [   15.809091]  domain 0: span 0-1 level SIBLING
  600. [   15.809096]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
  601. [   15.809107]   domain 1: span 0-1 level MC
  602. [   15.809111]    groups: 0-1 (cpu_power = 1178)
  603. [   15.809121] CPU1 attaching sched-domain:
  604. [   15.809125]  domain 0: span 0-1 level SIBLING
  605. [   15.809129]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
  606. [   15.809138]   domain 1: span 0-1 level MC
  607. [   15.809143]    groups: 0-1 (cpu_power = 1178)
  608. [   18.475962] CPU0 attaching NULL sched-domain.
  609. [   18.475974] CPU1 attaching NULL sched-domain.
  610. [   18.508175] CPU0 attaching sched-domain:
  611. [   18.508184]  domain 0: span 0-1 level SIBLING
  612. [   18.508190]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
  613. [   18.508203]   domain 1: span 0-1 level MC
  614. [   18.508209]    groups: 0-1 (cpu_power = 1178)
  615. [   18.508222] CPU1 attaching sched-domain:
  616. [   18.508226]  domain 0: span 0-1 level SIBLING
  617. [   18.508231]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
  618. [   18.508243]   domain 1: span 0-1 level MC
  619. [   18.508248]    groups: 0-1 (cpu_power = 1178)
  620. [   79.315483] I-pipe: Domain RTAI registered.
  621. [   79.315498] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  622. [   79.315505] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  623. [   79.315573] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  624. [   79.315578] PIPELINE layers:
  625. [   79.315584] fa5e9e20 9ac15d93 RTAI 200
  626. [   79.315588] c085cb20 0 Linux 100
  627. [   79.356189] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  628. [   79.356471] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  629. [   79.356479] RTAI[sched]: hard timer type/freq = APIC/12528296(Hz); default timing: periodic; linear timed lists.
  630. [   79.356484] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3006890000 hz.
  631. [   79.356488] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  632. [   79.356606] RTAI[usi]: enabled.
  633. [   79.598147] RTAI[math]: loaded.
  634. [   80.056633] hm2: loading Mesa HostMot2 driver version 0.15
  635. [   80.100645] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
  636. [   80.100702] hm2_pci: discovered 5i20 at 0000:02:0a.0
  637. [   80.100819]  hm2_5i20.0: firmware: requesting hm2/5i20/SVST6_6_7I52S.BIT
  638. [   80.325884] hm2/hm2_5i20.0: 72 I/O Pins used:
  639. [   80.325892] hm2/hm2_5i20.0:     IO Pin 000 (P2-01): IOPort
  640. [   80.325897] hm2/hm2_5i20.0:     IO Pin 001 (P2-03): Muxed Encoder #0, pin Muxed A (Input)
  641. [   80.325902] hm2/hm2_5i20.0:     IO Pin 002 (P2-05): Muxed Encoder #0, pin Muxed B (Input)
  642. [   80.325907] hm2/hm2_5i20.0:     IO Pin 003 (P2-07): Muxed Encoder #0, pin Muxed Index (Input)
  643. [   80.325911] hm2/hm2_5i20.0:     IO Pin 004 (P2-09): Muxed Encoder #1, pin Muxed A (Input)
  644. [   80.325916] hm2/hm2_5i20.0:     IO Pin 005 (P2-11): Muxed Encoder #1, pin Muxed B (Input)
  645. [   80.325921] hm2/hm2_5i20.0:     IO Pin 006 (P2-13): Muxed Encoder #1, pin Muxed Index (Input)
  646. [   80.325925] hm2/hm2_5i20.0:     IO Pin 007 (P2-15): IOPort
  647. [   80.325929] hm2/hm2_5i20.0:     IO Pin 008 (P2-17): IOPort
  648. [   80.325932] hm2/hm2_5i20.0:     IO Pin 009 (P2-19): IOPort
  649. [   80.325937] hm2/hm2_5i20.0:     IO Pin 010 (P2-21): Muxed Encoder Select #0, pin Mux Select 0 (Output)
  650. [   80.325941] hm2/hm2_5i20.0:     IO Pin 011 (P2-23): IOPort
  651. [   80.325945] hm2/hm2_5i20.0:     IO Pin 012 (P2-25): IOPort
  652. [   80.325948] hm2/hm2_5i20.0:     IO Pin 013 (P2-27): IOPort
  653. [   80.325952] hm2/hm2_5i20.0:     IO Pin 014 (P2-29): IOPort
  654. [   80.325956] hm2/hm2_5i20.0:     IO Pin 015 (P2-31): IOPort
  655. [   80.325959] hm2/hm2_5i20.0:     IO Pin 016 (P2-33): IOPort
  656. [   80.325964] hm2/hm2_5i20.0:     IO Pin 017 (P2-35): StepGen #2, pin Step (Output)
  657. [   80.325969] hm2/hm2_5i20.0:     IO Pin 018 (P2-37): StepGen #2, pin Direction (Output)
  658. [   80.325974] hm2/hm2_5i20.0:     IO Pin 019 (P2-39): StepGen #1, pin Step (Output)
  659. [   80.325978] hm2/hm2_5i20.0:     IO Pin 020 (P2-41): StepGen #1, pin Direction (Output)
  660. [   80.325983] hm2/hm2_5i20.0:     IO Pin 021 (P2-43): StepGen #0, pin Step (Output)
  661. [   80.325987] hm2/hm2_5i20.0:     IO Pin 022 (P2-45): StepGen #0, pin Direction (Output)
  662. [   80.325991] hm2/hm2_5i20.0:     IO Pin 023 (P2-47): IOPort
  663. [   80.325995] hm2/hm2_5i20.0:     IO Pin 024 (P3-01): IOPort
  664. [   80.325999] hm2/hm2_5i20.0:     IO Pin 025 (P3-03): IOPort
  665. [   80.326003] hm2/hm2_5i20.0:     IO Pin 026 (P3-05): IOPort
  666. [   80.326007] hm2/hm2_5i20.0:     IO Pin 027 (P3-07): IOPort
  667. [   80.326011] hm2/hm2_5i20.0:     IO Pin 028 (P3-09): IOPort
  668. [   80.326014] hm2/hm2_5i20.0:     IO Pin 029 (P3-11): IOPort
  669. [   80.326018] hm2/hm2_5i20.0:     IO Pin 030 (P3-13): IOPort
  670. [   80.326022] hm2/hm2_5i20.0:     IO Pin 031 (P3-15): IOPort
  671. [   80.326026] hm2/hm2_5i20.0:     IO Pin 032 (P3-17): IOPort
  672. [   80.326030] hm2/hm2_5i20.0:     IO Pin 033 (P3-19): IOPort
  673. [   80.326034] hm2/hm2_5i20.0:     IO Pin 034 (P3-21): IOPort
  674. [   80.326037] hm2/hm2_5i20.0:     IO Pin 035 (P3-23): IOPort
  675. [   80.326041] hm2/hm2_5i20.0:     IO Pin 036 (P3-25): IOPort
  676. [   80.326045] hm2/hm2_5i20.0:     IO Pin 037 (P3-27): IOPort
  677. [   80.326049] hm2/hm2_5i20.0:     IO Pin 038 (P3-29): IOPort
  678. [   80.326053] hm2/hm2_5i20.0:     IO Pin 039 (P3-31): IOPort
  679. [   80.326057] hm2/hm2_5i20.0:     IO Pin 040 (P3-33): IOPort
  680. [   80.326060] hm2/hm2_5i20.0:     IO Pin 041 (P3-35): IOPort
  681. [   80.326064] hm2/hm2_5i20.0:     IO Pin 042 (P3-37): IOPort
  682. [   80.326068] hm2/hm2_5i20.0:     IO Pin 043 (P3-39): IOPort
  683. [   80.326072] hm2/hm2_5i20.0:     IO Pin 044 (P3-41): IOPort
  684. [   80.326076] hm2/hm2_5i20.0:     IO Pin 045 (P3-43): IOPort
  685. [   80.326080] hm2/hm2_5i20.0:     IO Pin 046 (P3-45): IOPort
  686. [   80.326083] hm2/hm2_5i20.0:     IO Pin 047 (P3-47): IOPort
  687. [   80.326087] hm2/hm2_5i20.0:     IO Pin 048 (P4-01): IOPort
  688. [   80.326091] hm2/hm2_5i20.0:     IO Pin 049 (P4-03): IOPort
  689. [   80.326095] hm2/hm2_5i20.0:     IO Pin 050 (P4-05): IOPort
  690. [   80.326099] hm2/hm2_5i20.0:     IO Pin 051 (P4-07): IOPort
  691. [   80.326103] hm2/hm2_5i20.0:     IO Pin 052 (P4-09): IOPort
  692. [   80.326106] hm2/hm2_5i20.0:     IO Pin 053 (P4-11): IOPort
  693. [   80.326110] hm2/hm2_5i20.0:     IO Pin 054 (P4-13): IOPort
  694. [   80.326114] hm2/hm2_5i20.0:     IO Pin 055 (P4-15): IOPort
  695. [   80.326119] hm2/hm2_5i20.0:     IO Pin 056 (P4-17): IOPort
  696. [   80.326124] hm2/hm2_5i20.0:     IO Pin 057 (P4-19): IOPort
  697. [   80.326130] hm2/hm2_5i20.0:     IO Pin 058 (P4-21): IOPort
  698. [   80.326134] hm2/hm2_5i20.0:     IO Pin 059 (P4-23): IOPort
  699. [   80.326138] hm2/hm2_5i20.0:     IO Pin 060 (P4-25): IOPort
  700. [   80.326141] hm2/hm2_5i20.0:     IO Pin 061 (P4-27): IOPort
  701. [   80.326145] hm2/hm2_5i20.0:     IO Pin 062 (P4-29): IOPort
  702. [   80.326148] hm2/hm2_5i20.0:     IO Pin 063 (P4-31): IOPort
  703. [   80.326152] hm2/hm2_5i20.0:     IO Pin 064 (P4-33): IOPort
  704. [   80.326155] hm2/hm2_5i20.0:     IO Pin 065 (P4-35): IOPort
  705. [   80.326159] hm2/hm2_5i20.0:     IO Pin 066 (P4-37): IOPort
  706. [   80.326162] hm2/hm2_5i20.0:     IO Pin 067 (P4-39): IOPort
  707. [   80.326166] hm2/hm2_5i20.0:     IO Pin 068 (P4-41): IOPort
  708. [   80.326169] hm2/hm2_5i20.0:     IO Pin 069 (P4-43): IOPort
  709. [   80.326173] hm2/hm2_5i20.0:     IO Pin 070 (P4-45): IOPort
  710. [   80.326176] hm2/hm2_5i20.0:     IO Pin 071 (P4-47): IOPort
  711. [   80.326357] hm2/hm2_5i20.0: registered
  712. [   80.326361] hm2_5i20.0: initialized AnyIO board at 0000:02:0a.0
  713. [   81.561158] hm2_5i20.0: dropping AnyIO board at 0000:02:0a.0
  714. [   81.561168] hm2/hm2_5i20.0: unregistered
  715. [   81.561237] hm2_pci: driver unloaded
  716. [   81.566268] hm2: unloading
  717. [   81.685178] RTAI[math]: unloaded.
  718. [   81.735031] SCHED releases registered named ALIEN RTGLBH
  719. [   81.765535] RTAI[malloc]: unloaded.
  720. [   81.864031] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  721. [   81.869402] I-pipe: Domain RTAI unregistered.
  722. [   81.869477] RTAI[hal]: unmounted.
  723. [  115.517233] I-pipe: Domain RTAI registered.
  724. [  115.517246] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  725. [  115.517252] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  726. [  115.517321] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  727. [  115.517326] PIPELINE layers:
  728. [  115.517333] fadcce20 9ac15d93 RTAI 200
  729. [  115.517339] c085cb20 0 Linux 100
  730. [  115.543648] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  731. [  115.543953] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  732. [  115.543961] RTAI[sched]: hard timer type/freq = APIC/12528296(Hz); default timing: periodic; linear timed lists.
  733. [  115.543966] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3006890000 hz.
  734. [  115.543970] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  735. [  115.544098] RTAI[usi]: enabled.
  736. [  115.613232] RTAI[math]: loaded.
  737. [  115.701612] hm2: loading Mesa HostMot2 driver version 0.15
  738. [  115.706183] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
  739. [  115.706240] hm2_pci: discovered 5i20 at 0000:02:0a.0
  740. [  115.706369]  hm2_5i20.0: firmware: requesting hm2/5i20/SVST6_6_7I52S.BIT
  741. [  115.823939] hm2/hm2_5i20.0: 72 I/O Pins used:
  742. [  115.823946] hm2/hm2_5i20.0:     IO Pin 000 (P2-01): IOPort
  743. [  115.823952] hm2/hm2_5i20.0:     IO Pin 001 (P2-03): Muxed Encoder #0, pin Muxed A (Input)
  744. [  115.823957] hm2/hm2_5i20.0:     IO Pin 002 (P2-05): Muxed Encoder #0, pin Muxed B (Input)
  745. [  115.823962] hm2/hm2_5i20.0:     IO Pin 003 (P2-07): Muxed Encoder #0, pin Muxed Index (Input)
  746. [  115.823966] hm2/hm2_5i20.0:     IO Pin 004 (P2-09): Muxed Encoder #1, pin Muxed A (Input)
  747. [  115.823971] hm2/hm2_5i20.0:     IO Pin 005 (P2-11): Muxed Encoder #1, pin Muxed B (Input)
  748. [  115.823976] hm2/hm2_5i20.0:     IO Pin 006 (P2-13): Muxed Encoder #1, pin Muxed Index (Input)
  749. [  115.823980] hm2/hm2_5i20.0:     IO Pin 007 (P2-15): IOPort
  750. [  115.823983] hm2/hm2_5i20.0:     IO Pin 008 (P2-17): IOPort
  751. [  115.823987] hm2/hm2_5i20.0:     IO Pin 009 (P2-19): IOPort
  752. [  115.823992] hm2/hm2_5i20.0:     IO Pin 010 (P2-21): Muxed Encoder Select #0, pin Mux Select 0 (Output)
  753. [  115.823996] hm2/hm2_5i20.0:     IO Pin 011 (P2-23): IOPort
  754. [  115.824000] hm2/hm2_5i20.0:     IO Pin 012 (P2-25): IOPort
  755. [  115.824003] hm2/hm2_5i20.0:     IO Pin 013 (P2-27): IOPort
  756. [  115.824007] hm2/hm2_5i20.0:     IO Pin 014 (P2-29): IOPort
  757. [  115.824011] hm2/hm2_5i20.0:     IO Pin 015 (P2-31): IOPort
  758. [  115.824014] hm2/hm2_5i20.0:     IO Pin 016 (P2-33): IOPort
  759. [  115.824018] hm2/hm2_5i20.0:     IO Pin 017 (P2-35): IOPort
  760. [  115.824022] hm2/hm2_5i20.0:     IO Pin 018 (P2-37): IOPort
  761. [  115.824026] hm2/hm2_5i20.0:     IO Pin 019 (P2-39): IOPort
  762. [  115.824029] hm2/hm2_5i20.0:     IO Pin 020 (P2-41): IOPort
  763. [  115.824033] hm2/hm2_5i20.0:     IO Pin 021 (P2-43): IOPort
  764. [  115.824037] hm2/hm2_5i20.0:     IO Pin 022 (P2-45): IOPort
  765. [  115.824040] hm2/hm2_5i20.0:     IO Pin 023 (P2-47): IOPort
  766. [  115.824044] hm2/hm2_5i20.0:     IO Pin 024 (P3-01): IOPort
  767. [  115.824048] hm2/hm2_5i20.0:     IO Pin 025 (P3-03): IOPort
  768. [  115.824051] hm2/hm2_5i20.0:     IO Pin 026 (P3-05): IOPort
  769. [  115.824055] hm2/hm2_5i20.0:     IO Pin 027 (P3-07): IOPort
  770. [  115.824059] hm2/hm2_5i20.0:     IO Pin 028 (P3-09): IOPort
  771. [  115.824062] hm2/hm2_5i20.0:     IO Pin 029 (P3-11): IOPort
  772. [  115.824066] hm2/hm2_5i20.0:     IO Pin 030 (P3-13): IOPort
  773. [  115.824070] hm2/hm2_5i20.0:     IO Pin 031 (P3-15): IOPort
  774. [  115.824074] hm2/hm2_5i20.0:     IO Pin 032 (P3-17): IOPort
  775. [  115.824077] hm2/hm2_5i20.0:     IO Pin 033 (P3-19): IOPort
  776. [  115.824081] hm2/hm2_5i20.0:     IO Pin 034 (P3-21): IOPort
  777. [  115.824085] hm2/hm2_5i20.0:     IO Pin 035 (P3-23): IOPort
  778. [  115.824088] hm2/hm2_5i20.0:     IO Pin 036 (P3-25): IOPort
  779. [  115.824092] hm2/hm2_5i20.0:     IO Pin 037 (P3-27): IOPort
  780. [  115.824096] hm2/hm2_5i20.0:     IO Pin 038 (P3-29): IOPort
  781. [  115.824099] hm2/hm2_5i20.0:     IO Pin 039 (P3-31): IOPort
  782. [  115.824103] hm2/hm2_5i20.0:     IO Pin 040 (P3-33): IOPort
  783. [  115.824107] hm2/hm2_5i20.0:     IO Pin 041 (P3-35): IOPort
  784. [  115.824111] hm2/hm2_5i20.0:     IO Pin 042 (P3-37): IOPort
  785. [  115.824114] hm2/hm2_5i20.0:     IO Pin 043 (P3-39): IOPort
  786. [  115.824118] hm2/hm2_5i20.0:     IO Pin 044 (P3-41): IOPort
  787. [  115.824122] hm2/hm2_5i20.0:     IO Pin 045 (P3-43): IOPort
  788. [  115.824125] hm2/hm2_5i20.0:     IO Pin 046 (P3-45): IOPort
  789. [  115.824129] hm2/hm2_5i20.0:     IO Pin 047 (P3-47): IOPort
  790. [  115.824133] hm2/hm2_5i20.0:     IO Pin 048 (P4-01): IOPort
  791. [  115.824136] hm2/hm2_5i20.0:     IO Pin 049 (P4-03): IOPort
  792. [  115.824140] hm2/hm2_5i20.0:     IO Pin 050 (P4-05): IOPort
  793. [  115.824144] hm2/hm2_5i20.0:     IO Pin 051 (P4-07): IOPort
  794. [  115.824147] hm2/hm2_5i20.0:     IO Pin 052 (P4-09): IOPort
  795. [  115.824151] hm2/hm2_5i20.0:     IO Pin 053 (P4-11): IOPort
  796. [  115.824155] hm2/hm2_5i20.0:     IO Pin 054 (P4-13): IOPort
  797. [  115.824159] hm2/hm2_5i20.0:     IO Pin 055 (P4-15): IOPort
  798. [  115.824162] hm2/hm2_5i20.0:     IO Pin 056 (P4-17): IOPort
  799. [  115.824166] hm2/hm2_5i20.0:     IO Pin 057 (P4-19): IOPort
  800. [  115.824170] hm2/hm2_5i20.0:     IO Pin 058 (P4-21): IOPort
  801. [  115.824173] hm2/hm2_5i20.0:     IO Pin 059 (P4-23): IOPort
  802. [  115.824177] hm2/hm2_5i20.0:     IO Pin 060 (P4-25): IOPort
  803. [  115.824181] hm2/hm2_5i20.0:     IO Pin 061 (P4-27): IOPort
  804. [  115.824184] hm2/hm2_5i20.0:     IO Pin 062 (P4-29): IOPort
  805. [  115.824188] hm2/hm2_5i20.0:     IO Pin 063 (P4-31): IOPort
  806. [  115.824192] hm2/hm2_5i20.0:     IO Pin 064 (P4-33): IOPort
  807. [  115.824195] hm2/hm2_5i20.0:     IO Pin 065 (P4-35): IOPort
  808. [  115.824199] hm2/hm2_5i20.0:     IO Pin 066 (P4-37): IOPort
  809. [  115.824203] hm2/hm2_5i20.0:     IO Pin 067 (P4-39): IOPort
  810. [  115.824207] hm2/hm2_5i20.0:     IO Pin 068 (P4-41): IOPort
  811. [  115.824210] hm2/hm2_5i20.0:     IO Pin 069 (P4-43): IOPort
  812. [  115.824214] hm2/hm2_5i20.0:     IO Pin 070 (P4-45): IOPort
  813. [  115.824218] hm2/hm2_5i20.0:     IO Pin 071 (P4-47): IOPort
  814. [  115.824390] hm2/hm2_5i20.0: registered
  815. [  115.824394] hm2_5i20.0: initialized AnyIO board at 0000:02:0a.0
  816. [  116.196552] hm2_5i20.0: dropping AnyIO board at 0000:02:0a.0
  817. [  116.196563] hm2/hm2_5i20.0: unregistered
  818. [  116.196779] hm2_pci: driver unloaded
  819. [  116.201096] hm2: unloading
  820. [  116.263355] RTAI[math]: unloaded.
  821. [  116.312765] SCHED releases registered named ALIEN RTGLBH
  822. [  116.344369] RTAI[malloc]: unloaded.
  823. [  116.444022] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  824. [  116.448076] I-pipe: Domain RTAI unregistered.
  825. [  116.448166] RTAI[hal]: unmounted.
  826. [  273.774996] I-pipe: Domain RTAI registered.
  827. [  273.775009] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  828. [  273.775014] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  829. [  273.775084] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  830. [  273.775089] PIPELINE layers:
  831. [  273.775095] fb704e20 9ac15d93 RTAI 200
  832. [  273.775100] c085cb20 0 Linux 100
  833. [  273.802535] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  834. [  273.802789] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  835. [  273.802797] RTAI[sched]: hard timer type/freq = APIC/12528296(Hz); default timing: periodic; linear timed lists.
  836. [  273.802802] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3006890000 hz.
  837. [  273.802806] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  838. [  273.804139] RTAI[usi]: enabled.
  839. [  273.873893] RTAI[math]: loaded.
  840. [  273.967497] hm2: loading Mesa HostMot2 driver version 0.15
  841. [  273.971628] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
  842. [  273.971684] hm2_pci: discovered 5i20 at 0000:02:0a.0
  843. [  273.972176]  hm2_5i20.0: firmware: requesting hm2/5i20/SVST6_6_7I52S.BIT
  844. [  274.089783] hm2/hm2_5i20.0: 72 I/O Pins used:
  845. [  274.089794] hm2/hm2_5i20.0:     IO Pin 000 (P2-01): IOPort
  846. [  274.089802] hm2/hm2_5i20.0:     IO Pin 001 (P2-03): Muxed Encoder #0, pin Muxed A (Input)
  847. [  274.089810] hm2/hm2_5i20.0:     IO Pin 002 (P2-05): Muxed Encoder #0, pin Muxed B (Input)
  848. [  274.089817] hm2/hm2_5i20.0:     IO Pin 003 (P2-07): Muxed Encoder #0, pin Muxed Index (Input)
  849. [  274.089824] hm2/hm2_5i20.0:     IO Pin 004 (P2-09): Muxed Encoder #1, pin Muxed A (Input)
  850. [  274.089832] hm2/hm2_5i20.0:     IO Pin 005 (P2-11): Muxed Encoder #1, pin Muxed B (Input)
  851. [  274.089839] hm2/hm2_5i20.0:     IO Pin 006 (P2-13): Muxed Encoder #1, pin Muxed Index (Input)
  852. [  274.089846] hm2/hm2_5i20.0:     IO Pin 007 (P2-15): IOPort
  853. [  274.089853] hm2/hm2_5i20.0:     IO Pin 008 (P2-17): IOPort
  854. [  274.089860] hm2/hm2_5i20.0:     IO Pin 009 (P2-19): IOPort
  855. [  274.089868] hm2/hm2_5i20.0:     IO Pin 010 (P2-21): Muxed Encoder Select #0, pin Mux Select 0 (Output)
  856. [  274.089874] hm2/hm2_5i20.0:     IO Pin 011 (P2-23): IOPort
  857. [  274.089880] hm2/hm2_5i20.0:     IO Pin 012 (P2-25): IOPort
  858. [  274.089886] hm2/hm2_5i20.0:     IO Pin 013 (P2-27): IOPort
  859. [  274.089892] hm2/hm2_5i20.0:     IO Pin 014 (P2-29): IOPort
  860. [  274.089898] hm2/hm2_5i20.0:     IO Pin 015 (P2-31): IOPort
  861. [  274.089905] hm2/hm2_5i20.0:     IO Pin 016 (P2-33): IOPort
  862. [  274.089913] hm2/hm2_5i20.0:     IO Pin 017 (P2-35): StepGen #2, pin Step (Output)
  863. [  274.089921] hm2/hm2_5i20.0:     IO Pin 018 (P2-37): StepGen #2, pin Direction (Output)
  864. [  274.089929] hm2/hm2_5i20.0:     IO Pin 019 (P2-39): StepGen #1, pin Step (Output)
  865. [  274.089936] hm2/hm2_5i20.0:     IO Pin 020 (P2-41): StepGen #1, pin Direction (Output)
  866. [  274.089943] hm2/hm2_5i20.0:     IO Pin 021 (P2-43): StepGen #0, pin Step (Output)
  867. [  274.089951] hm2/hm2_5i20.0:     IO Pin 022 (P2-45): StepGen #0, pin Direction (Output)
  868. [  274.089958] hm2/hm2_5i20.0:     IO Pin 023 (P2-47): IOPort
  869. [  274.089964] hm2/hm2_5i20.0:     IO Pin 024 (P3-01): IOPort
  870. [  274.089970] hm2/hm2_5i20.0:     IO Pin 025 (P3-03): IOPort
  871. [  274.089975] hm2/hm2_5i20.0:     IO Pin 026 (P3-05): IOPort
  872. [  274.089981] hm2/hm2_5i20.0:     IO Pin 027 (P3-07): IOPort
  873. [  274.089986] hm2/hm2_5i20.0:     IO Pin 028 (P3-09): IOPort
  874. [  274.089991] hm2/hm2_5i20.0:     IO Pin 029 (P3-11): IOPort
  875. [  274.089997] hm2/hm2_5i20.0:     IO Pin 030 (P3-13): IOPort
  876. [  274.090002] hm2/hm2_5i20.0:     IO Pin 031 (P3-15): IOPort
  877. [  274.090008] hm2/hm2_5i20.0:     IO Pin 032 (P3-17): IOPort
  878. [  274.090014] hm2/hm2_5i20.0:     IO Pin 033 (P3-19): IOPort
  879. [  274.090020] hm2/hm2_5i20.0:     IO Pin 034 (P3-21): IOPort
  880. [  274.090026] hm2/hm2_5i20.0:     IO Pin 035 (P3-23): IOPort
  881. [  274.090032] hm2/hm2_5i20.0:     IO Pin 036 (P3-25): IOPort
  882. [  274.090038] hm2/hm2_5i20.0:     IO Pin 037 (P3-27): IOPort
  883. [  274.090044] hm2/hm2_5i20.0:     IO Pin 038 (P3-29): IOPort
  884. [  274.090050] hm2/hm2_5i20.0:     IO Pin 039 (P3-31): IOPort
  885. [  274.090054] hm2/hm2_5i20.0:     IO Pin 040 (P3-33): IOPort
  886. [  274.090058] hm2/hm2_5i20.0:     IO Pin 041 (P3-35): IOPort
  887. [  274.090061] hm2/hm2_5i20.0:     IO Pin 042 (P3-37): IOPort
  888. [  274.090065] hm2/hm2_5i20.0:     IO Pin 043 (P3-39): IOPort
  889. [  274.090068] hm2/hm2_5i20.0:     IO Pin 044 (P3-41): IOPort
  890. [  274.090072] hm2/hm2_5i20.0:     IO Pin 045 (P3-43): IOPort
  891. [  274.090075] hm2/hm2_5i20.0:     IO Pin 046 (P3-45): IOPort
  892. [  274.090079] hm2/hm2_5i20.0:     IO Pin 047 (P3-47): IOPort
  893. [  274.090082] hm2/hm2_5i20.0:     IO Pin 048 (P4-01): IOPort
  894. [  274.090086] hm2/hm2_5i20.0:     IO Pin 049 (P4-03): IOPort
  895. [  274.090089] hm2/hm2_5i20.0:     IO Pin 050 (P4-05): IOPort
  896. [  274.090093] hm2/hm2_5i20.0:     IO Pin 051 (P4-07): IOPort
  897. [  274.090096] hm2/hm2_5i20.0:     IO Pin 052 (P4-09): IOPort
  898. [  274.090100] hm2/hm2_5i20.0:     IO Pin 053 (P4-11): IOPort
  899. [  274.090103] hm2/hm2_5i20.0:     IO Pin 054 (P4-13): IOPort
  900. [  274.090107] hm2/hm2_5i20.0:     IO Pin 055 (P4-15): IOPort
  901. [  274.090110] hm2/hm2_5i20.0:     IO Pin 056 (P4-17): IOPort
  902. [  274.090114] hm2/hm2_5i20.0:     IO Pin 057 (P4-19): IOPort
  903. [  274.090117] hm2/hm2_5i20.0:     IO Pin 058 (P4-21): IOPort
  904. [  274.090121] hm2/hm2_5i20.0:     IO Pin 059 (P4-23): IOPort
  905. [  274.090125] hm2/hm2_5i20.0:     IO Pin 060 (P4-25): IOPort
  906. [  274.090128] hm2/hm2_5i20.0:     IO Pin 061 (P4-27): IOPort
  907. [  274.090132] hm2/hm2_5i20.0:     IO Pin 062 (P4-29): IOPort
  908. [  274.090135] hm2/hm2_5i20.0:     IO Pin 063 (P4-31): IOPort
  909. [  274.090139] hm2/hm2_5i20.0:     IO Pin 064 (P4-33): IOPort
  910. [  274.090142] hm2/hm2_5i20.0:     IO Pin 065 (P4-35): IOPort
  911. [  274.090146] hm2/hm2_5i20.0:     IO Pin 066 (P4-37): IOPort
  912. [  274.090149] hm2/hm2_5i20.0:     IO Pin 067 (P4-39): IOPort
  913. [  274.090153] hm2/hm2_5i20.0:     IO Pin 068 (P4-41): IOPort
  914. [  274.090156] hm2/hm2_5i20.0:     IO Pin 069 (P4-43): IOPort
  915. [  274.090160] hm2/hm2_5i20.0:     IO Pin 070 (P4-45): IOPort
  916. [  274.090163] hm2/hm2_5i20.0:     IO Pin 071 (P4-47): IOPort
  917. [  274.090347] hm2/hm2_5i20.0: registered
  918. [  274.090351] hm2_5i20.0: initialized AnyIO board at 0000:02:0a.0
  919. [  274.480407] hm2_5i20.0: dropping AnyIO board at 0000:02:0a.0
  920. [  274.480419] hm2/hm2_5i20.0: unregistered
  921. [  274.480599] hm2_pci: driver unloaded
  922. [  274.485004] hm2: unloading
  923. [  274.547096] RTAI[math]: unloaded.
  924. [  274.604181] SCHED releases registered named ALIEN RTGLBH
  925. [  274.637291] RTAI[malloc]: unloaded.
  926. [  274.736026] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  927. [  274.740191] I-pipe: Domain RTAI unregistered.
  928. [  274.740271] RTAI[hal]: unmounted.
  929. [  361.912022] usb 1-4: new high speed USB device using ehci_hcd and address 2
  930. [  362.045053] usb 1-4: configuration #1 chosen from 1 choice
  931. [  362.106827] Initializing USB Mass Storage driver...
  932. [  362.107402] scsi2 : SCSI emulation for USB Mass Storage devices
  933. [  362.107836] usbcore: registered new interface driver usb-storage
  934. [  362.107843] USB Mass Storage support registered.
  935. [  362.111489] usb-storage: device found at 2
  936. [  362.111496] usb-storage: waiting for device to settle before scanning
  937. [  367.108233] usb-storage: device scan complete
  938. [  367.108948] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer           1.02 PQ: 0 ANSI: 2
  939. [  367.117070] sd 2:0:0:0: [sdb] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
  940. [  367.117136] sd 2:0:0:0: Attached scsi generic sg2 type 0
  941. [  367.119283] sd 2:0:0:0: [sdb] Write Protect is off
  942. [  367.119292] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
  943. [  367.119298] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  944. [  367.122301] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  945. [  367.122311]  sdb: sdb1
  946. [  367.130563] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  947. [  367.130575] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  948. [  915.525562] usb 1-4: USB disconnect, address 2
  949. [ 2791.387970] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
  950. [ 5787.379910] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
  951. [ 5941.760031] end_request: I/O error, dev fd0, sector 0
  952. [ 5941.784039] end_request: I/O error, dev fd0, sector 0
  953. [ 8193.390170] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
  954. [10525.708023] usb 1-4: new high speed USB device using ehci_hcd and address 3
  955. [10525.841100] usb 1-4: configuration #1 chosen from 1 choice
  956. [10525.841971] scsi3 : SCSI emulation for USB Mass Storage devices
  957. [10525.842189] usb-storage: device found at 3
  958. [10525.842195] usb-storage: waiting for device to settle before scanning
  959. [10527.649910] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
  960. [10530.840157] usb-storage: device scan complete
  961. [10530.840897] scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer           1.02 PQ: 0 ANSI: 2
  962. [10530.845278] sd 3:0:0:0: [sdb] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
  963. [10530.845488] sd 3:0:0:0: Attached scsi generic sg2 type 0
  964. [10530.851132] sd 3:0:0:0: [sdb] Write Protect is off
  965. [10530.851141] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
  966. [10530.851147] sd 3:0:0:0: [sdb] Assuming drive cache: write through
  967. [10530.857654] sd 3:0:0:0: [sdb] Assuming drive cache: write through
  968. [10530.857666]  sdb: sdb1
  969. [10530.864396] sd 3:0:0:0: [sdb] Assuming drive cache: write through
  970. [10530.864412] sd 3:0:0:0: [sdb] Attached SCSI removable disk
  971. [10605.657555] I-pipe: Domain RTAI registered.
  972. [10605.657568] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  973. [10605.657573] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  974. [10605.657640] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  975. [10605.657645] PIPELINE layers:
  976. [10605.657651] fa519e20 9ac15d93 RTAI 200
  977. [10605.657656] c085cb20 0 Linux 100
  978. [10605.684547] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  979. [10605.684794] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  980. [10605.684802] RTAI[sched]: hard timer type/freq = APIC/12528296(Hz); default timing: periodic; linear timed lists.
  981. [10605.684808] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3006890000 hz.
  982. [10605.684811] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  983. [10605.686953] RTAI[usi]: enabled.
  984. [10605.767400] RTAI[math]: loaded.
  985. [10605.857511] hm2: loading Mesa HostMot2 driver version 0.15
  986. [10605.862070] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
  987. [10605.862128] hm2_pci: discovered 5i20 at 0000:02:0a.0
  988. [10605.862249]  hm2_5i20.0: firmware: requesting hm2/5i20/SVST6_6_7I52S.BIT
  989. [10605.979735] hm2/hm2_5i20.0: 72 I/O Pins used:
  990. [10605.979742] hm2/hm2_5i20.0:     IO Pin 000 (P2-01): IOPort
  991. [10605.979747] hm2/hm2_5i20.0:     IO Pin 001 (P2-03): Muxed Encoder #0, pin Muxed A (Input)
  992. [10605.979752] hm2/hm2_5i20.0:     IO Pin 002 (P2-05): Muxed Encoder #0, pin Muxed B (Input)
  993. [10605.979757] hm2/hm2_5i20.0:     IO Pin 003 (P2-07): Muxed Encoder #0, pin Muxed Index (Input)
  994. [10605.979762] hm2/hm2_5i20.0:     IO Pin 004 (P2-09): Muxed Encoder #1, pin Muxed A (Input)
  995. [10605.979767] hm2/hm2_5i20.0:     IO Pin 005 (P2-11): Muxed Encoder #1, pin Muxed B (Input)
  996. [10605.979771] hm2/hm2_5i20.0:     IO Pin 006 (P2-13): Muxed Encoder #1, pin Muxed Index (Input)
  997. [10605.979776] hm2/hm2_5i20.0:     IO Pin 007 (P2-15): IOPort
  998. [10605.979779] hm2/hm2_5i20.0:     IO Pin 008 (P2-17): IOPort
  999. [10605.979783] hm2/hm2_5i20.0:     IO Pin 009 (P2-19): IOPort
  1000. [10605.979787] hm2/hm2_5i20.0:     IO Pin 010 (P2-21): Muxed Encoder Select #0, pin Mux Select 0 (Output)
  1001. [10605.979792] hm2/hm2_5i20.0:     IO Pin 011 (P2-23): IOPort
  1002. [10605.979795] hm2/hm2_5i20.0:     IO Pin 012 (P2-25): IOPort
  1003. [10605.979799] hm2/hm2_5i20.0:     IO Pin 013 (P2-27): IOPort
  1004. [10605.979803] hm2/hm2_5i20.0:     IO Pin 014 (P2-29): IOPort
  1005. [10605.979806] hm2/hm2_5i20.0:     IO Pin 015 (P2-31): IOPort
  1006. [10605.979810] hm2/hm2_5i20.0:     IO Pin 016 (P2-33): IOPort
  1007. [10605.979815] hm2/hm2_5i20.0:     IO Pin 017 (P2-35): StepGen #2, pin Step (Output)
  1008. [10605.979820] hm2/hm2_5i20.0:     IO Pin 018 (P2-37): StepGen #2, pin Direction (Output)
  1009. [10605.979825] hm2/hm2_5i20.0:     IO Pin 019 (P2-39): StepGen #1, pin Step (Output)
  1010. [10605.979829] hm2/hm2_5i20.0:     IO Pin 020 (P2-41): StepGen #1, pin Direction (Output)
  1011. [10605.979834] hm2/hm2_5i20.0:     IO Pin 021 (P2-43): StepGen #0, pin Step (Output)
  1012. [10605.979838] hm2/hm2_5i20.0:     IO Pin 022 (P2-45): StepGen #0, pin Direction (Output)
  1013. [10605.979842] hm2/hm2_5i20.0:     IO Pin 023 (P2-47): IOPort
  1014. [10605.979847] hm2/hm2_5i20.0:     IO Pin 024 (P3-01): IOPort
  1015. [10605.979852] hm2/hm2_5i20.0:     IO Pin 025 (P3-03): IOPort
  1016. [10605.979860] hm2/hm2_5i20.0:     IO Pin 026 (P3-05): IOPort
  1017. [10605.979866] hm2/hm2_5i20.0:     IO Pin 027 (P3-07): IOPort
  1018. [10605.979871] hm2/hm2_5i20.0:     IO Pin 028 (P3-09): IOPort
  1019. [10605.979877] hm2/hm2_5i20.0:     IO Pin 029 (P3-11): IOPort
  1020. [10605.979882] hm2/hm2_5i20.0:     IO Pin 030 (P3-13): IOPort
  1021. [10605.979888] hm2/hm2_5i20.0:     IO Pin 031 (P3-15): IOPort
  1022. [10605.979894] hm2/hm2_5i20.0:     IO Pin 032 (P3-17): IOPort
  1023. [10605.979900] hm2/hm2_5i20.0:     IO Pin 033 (P3-19): IOPort
  1024. [10605.979906] hm2/hm2_5i20.0:     IO Pin 034 (P3-21): IOPort
  1025. [10605.979912] hm2/hm2_5i20.0:     IO Pin 035 (P3-23): IOPort
  1026. [10605.979917] hm2/hm2_5i20.0:     IO Pin 036 (P3-25): IOPort
  1027. [10605.979921] hm2/hm2_5i20.0:     IO Pin 037 (P3-27): IOPort
  1028. [10605.979925] hm2/hm2_5i20.0:     IO Pin 038 (P3-29): IOPort
  1029. [10605.979928] hm2/hm2_5i20.0:     IO Pin 039 (P3-31): IOPort
  1030. [10605.979932] hm2/hm2_5i20.0:     IO Pin 040 (P3-33): IOPort
  1031. [10605.979936] hm2/hm2_5i20.0:     IO Pin 041 (P3-35): IOPort
  1032. [10605.979939] hm2/hm2_5i20.0:     IO Pin 042 (P3-37): IOPort
  1033. [10605.979943] hm2/hm2_5i20.0:     IO Pin 043 (P3-39): IOPort
  1034. [10605.979947] hm2/hm2_5i20.0:     IO Pin 044 (P3-41): IOPort
  1035. [10605.979950] hm2/hm2_5i20.0:     IO Pin 045 (P3-43): IOPort
  1036. [10605.979954] hm2/hm2_5i20.0:     IO Pin 046 (P3-45): IOPort
  1037. [10605.979958] hm2/hm2_5i20.0:     IO Pin 047 (P3-47): IOPort
  1038. [10605.979961] hm2/hm2_5i20.0:     IO Pin 048 (P4-01): IOPort
  1039. [10605.979965] hm2/hm2_5i20.0:     IO Pin 049 (P4-03): IOPort
  1040. [10605.979969] hm2/hm2_5i20.0:     IO Pin 050 (P4-05): IOPort
  1041. [10605.979972] hm2/hm2_5i20.0:     IO Pin 051 (P4-07): IOPort
  1042. [10605.979976] hm2/hm2_5i20.0:     IO Pin 052 (P4-09): IOPort
  1043. [10605.979980] hm2/hm2_5i20.0:     IO Pin 053 (P4-11): IOPort
  1044. [10605.979983] hm2/hm2_5i20.0:     IO Pin 054 (P4-13): IOPort
  1045. [10605.979987] hm2/hm2_5i20.0:     IO Pin 055 (P4-15): IOPort
  1046. [10605.979991] hm2/hm2_5i20.0:     IO Pin 056 (P4-17): IOPort
  1047. [10605.979994] hm2/hm2_5i20.0:     IO Pin 057 (P4-19): IOPort
  1048. [10605.979998] hm2/hm2_5i20.0:     IO Pin 058 (P4-21): IOPort
  1049. [10605.980002] hm2/hm2_5i20.0:     IO Pin 059 (P4-23): IOPort
  1050. [10605.980005] hm2/hm2_5i20.0:     IO Pin 060 (P4-25): IOPort
  1051. [10605.980009] hm2/hm2_5i20.0:     IO Pin 061 (P4-27): IOPort
  1052. [10605.980012] hm2/hm2_5i20.0:     IO Pin 062 (P4-29): IOPort
  1053. [10605.980016] hm2/hm2_5i20.0:     IO Pin 063 (P4-31): IOPort
  1054. [10605.980020] hm2/hm2_5i20.0:     IO Pin 064 (P4-33): IOPort
  1055. [10605.980023] hm2/hm2_5i20.0:     IO Pin 065 (P4-35): IOPort
  1056. [10605.980027] hm2/hm2_5i20.0:     IO Pin 066 (P4-37): IOPort
  1057. [10605.980031] hm2/hm2_5i20.0:     IO Pin 067 (P4-39): IOPort
  1058. [10605.980034] hm2/hm2_5i20.0:     IO Pin 068 (P4-41): IOPort
  1059. [10605.980038] hm2/hm2_5i20.0:     IO Pin 069 (P4-43): IOPort
  1060. [10605.980042] hm2/hm2_5i20.0:     IO Pin 070 (P4-45): IOPort
  1061. [10605.980045] hm2/hm2_5i20.0:     IO Pin 071 (P4-47): IOPort
  1062. [10605.980222] hm2/hm2_5i20.0: registered
  1063. [10605.980226] hm2_5i20.0: initialized AnyIO board at 0000:02:0a.0
  1064. [10606.375488] hm2_5i20.0: dropping AnyIO board at 0000:02:0a.0
  1065. [10606.375499] hm2/hm2_5i20.0: unregistered
  1066. [10606.375571] hm2_pci: driver unloaded
  1067. [10606.380205] hm2: unloading
  1068. [10606.444664] RTAI[math]: unloaded.
  1069. [10606.463334] SCHED releases registered named ALIEN RTGLBH
  1070. [10606.497392] RTAI[malloc]: unloaded.
  1071. [10606.596022] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  1072. [10606.600157] I-pipe: Domain RTAI unregistered.
  1073. [10606.600242] RTAI[hal]: unmounted.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top