API tools faq
paste
xlazom00

Untitled

xlazom00
Dec 20th, 2022
242
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.47 KB | None | 0 0
raw download clone embed print report
  1. DDR Version V1.08 20220617
  2. LPDDR4X, 2112MHz
  3. channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  4. channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  5. channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  6. channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  7. Manufacturer ID:0xff
  8. CH0 RX Vref:28.7%, TX Vref:20.8%,0.0%
  9. CH1 RX Vref:30.7%, TX Vref:21.8%,0.0%
  10. CH2 RX Vref:28.7%, TX Vref:21.8%,0.0%
  11. CH3 RX Vref:29.7%, TX Vref:20.8%,0.0%
  12. change to F1: 528MHz
  13. change to F2: 1068MHz
  14. change to F3: 1560MHz
  15. change to F0: 2112MHz
  16. out
  17. U-Boot SPL board init
  18. U-Boot SPL 2017.09-armbian (Dec 21 2022 - 01:11:13)
  19. Trying to boot from MMC2
  20. spl: partition error
  21. Trying fit image at 0x4000 sector
  22. ## Verified-boot: 0
  23. ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK
  24. ## Checking uboot 0x00200000 ... sha256(bdb4e08419...) + OK
  25. ## Checking fdt 0x0030a698 ... sha256(d32827d3ac...) + OK
  26. ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
  27. ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
  28. ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
  29. Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
  30. Total: 596.499 ms
  31.  
  32. INFO: Preloader serial: 2
  33. NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang
  34. NOTICE: BL31: Built : 11:23:47, Aug 15 2022
  35. INFO: spec: 0x1
  36. INFO: ext 32k is not valid
  37. INFO: GICv3 without legacy support detected.
  38. INFO: ARM GICv3 driver initialized in EL3
  39. INFO: system boots from cpu-hwid-0
  40. INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
  41. INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
  42. INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
  43. INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
  44. INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
  45. INFO: BL31: Initialising Exception Handling Framework
  46. INFO: BL31: Initializing runtime services
  47. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  48. ERROR: Error initializing runtime service opteed_fast
  49. INFO: BL31: Preparing for EL3 exit to normal world
  50. INFO: Entry point address = 0x200000
  51. INFO: SPSR = 0x3c9
  52.  
  53.  
  54. U-Boot 2017.09-armbian (Dec 21 2022 - 01:11:13 +0100)
  55.  
  56. Model: Radxa ROCK 5B
  57. PreSerial: 2, raw, 0xfeb50000
  58. DRAM: 3.7 GiB
  59. Sysmem: init
  60. Relocation Offset: edb6c000
  61. Relocation fdt: eb9fa358 - eb9fecc0
  62. CR: M/C/I
  63. Using default environment
  64.  
  65. no mmc device at slot 1
  66. mmc@fe2c0000: 1 (SD), mmc@fe2e0000: 0
  67. Bootdev(atags): mmc 1
  68. MMC1: Legacy, 52Mhz
  69. PartType: EFI
  70. DM: v2
  71. No misc partition
  72. boot mode: None
  73. FIT: No boot partition
  74. No resource partition
  75. No resource partition
  76. No resource partition
  77. Failed to load DTB, ret=-19
  78. No find valid DTB, ret=-22
  79. Failed to get kernel dtb, ret=-22
  80. Model: Radxa ROCK 5B
  81. CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  82. b0pll 24000 KHz
  83. b1pll 24000 KHz
  84. lpll 24000 KHz
  85. v0pll 24000 KHz
  86. aupll 24000 KHz
  87. cpll 1500000 KHz
  88. gpll 1188000 KHz
  89. npll 24000 KHz
  90. ppll 1100000 KHz
  91. aclk_center_root 702000 KHz
  92. pclk_center_root 100000 KHz
  93. hclk_center_root 396000 KHz
  94. aclk_center_low_root 500000 KHz
  95. aclk_top_root 750000 KHz
  96. pclk_top_root 100000 KHz
  97. aclk_low_top_root 396000 KHz
  98. No misc partition
  99. Net: No ethernet found.
  100. Hit key to stop autoboot('CTRL+C'): 0
  101. PCIe-0 Link Fail
  102.  
  103. Device 0: unknown device
  104. switch to partitions #0, OK
  105. mmc1 is current device
  106. Scanning mmc 1:1...
  107. Found U-Boot script /boot.scr
  108. 3252 bytes read in 11 ms (288.1 KiB/s)
  109. ## Executing script at 00500000
  110. Boot script loaded from mmc 1
  111. 160 bytes read in 7 ms (21.5 KiB/s)
  112. 29237528 bytes read in 2369 ms (11.8 MiB/s)
  113. â–’â–’DDR Version V1.08 20220617
  114. LPDDR4X, 2112MHz
  115. channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  116. channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  117. channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  118. channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  119. Manufacturer ID:0xff
  120. CH0 RX Vref:29.7%, TX Vref:20.8%,0.0%
  121. CH1 RX Vref:30.7%, TX Vref:21.8%,0.0%
  122. CH2 RX Vref:28.7%, TX Vref:21.8%,0.0%
  123. CH3 RX Vref:29.7%, TX Vref:20.8%,0.0%
  124. change to F1: 528MHz
  125. change to F2: 1068MHz
  126. change to F3: 1560MHz
  127. change to F0: 2112MHz
  128. out
  129. U-Boot SPL board init
  130. U-Boot SPL 2017.09-armbian (Dec 21 2022 - 01:11:13)
  131. Trying to boot from MMC2
  132. spl: partition error
  133. Trying fit image at 0x4000 sector
  134. ## Verified-boot: 0
  135. ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK
  136. ## Checking uboot 0x00200000 ... sha256(bdb4e08419...) + OK
  137. ## Checking fdt 0x0030a698 ... sha256(d32827d3ac...) + OK
  138. ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
  139. ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
  140. ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
  141. Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
  142. Total: 596.253 ms
  143.  
  144. INFO: Preloader serial: 2
  145. NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang
  146. NOTICE: BL31: Built : 11:23:47, Aug 15 2022
  147. INFO: spec: 0x1
  148. INFO: ext 32k is not valid
  149. INFO: GICv3 without legacy support detected.
  150. INFO: ARM GICv3 driver initialized in EL3
  151. INFO: system boots from cpu-hwid-0
  152. INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
  153. INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
  154. INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
  155. INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
  156. INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
  157. INFO: BL31: Initialising Exception Handling Framework
  158. INFO: BL31: Initializing runtime services
  159. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  160. ERROR: Error initializing runtime service opteed_fast
  161. INFO: BL31: Preparing for EL3 exit to normal world
  162. INFO: Entry point address = 0x200000
  163. INFO: SPSR = 0x3c9
  164.  
  165.  
  166. U-Boot 2017.09-armbian (Dec 21 2022 - 01:11:13 +0100)
  167.  
  168. Model: Radxa ROCK 5B
  169. PreSerial: 2, raw, 0xfeb50000
  170. DRAM: 3.7 GiB
  171. Sysmem: init
  172. Relocation Offset: edb6c000
  173. Relocation fdt: eb9fa358 - eb9fecc0
  174. CR: M/C/I
  175. Using default environment
  176.  
  177. no mmc device at slot 1
  178. mmc@fe2c0000: 1 (SD), mmc@fe2e0000: 0
  179. Bootdev(atags): mmc 1
  180. MMC1: Legacy, 52Mhz
  181. PartType: EFI
  182. DM: v2
  183. No misc partition
  184. boot mode: None
  185. FIT: No boot partition
  186. No resource partition
  187. No resource partition
  188. No resource partition
  189. Failed to load DTB, ret=-19
  190. No find valid DTB, ret=-22
  191. Failed to get kernel dtb, ret=-22
  192. Model: Radxa ROCK 5B
  193. CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  194. b0pll 24000 KHz
  195. b1pll 24000 KHz
  196. lpll 24000 KHz
  197. v0pll 24000 KHz
  198. aupll 24000 KHz
  199. cpll 1500000 KHz
  200. gpll 1188000 KHz
  201. npll 24000 KHz
  202. ppll 1100000 KHz
  203. aclk_center_root 702000 KHz
  204. pclk_center_root 100000 KHz
  205. hclk_center_root 396000 KHz
  206. aclk_center_low_root 500000 KHz
  207. aclk_top_root 750000 KHz
  208. pclk_top_root 100000 KHz
  209. aclk_low_top_root 396000 KHz
  210. No misc partition
  211. Net: No ethernet found.
  212. Hit key to stop autoboot('CTRL+C'): 0
  213. PCIe-0 Link Fail
  214.  
  215. Device 0: unknown device
  216. switch to partitions #0, OK
  217. mmc1 is current device
  218. Scanning mmc 1:1...
  219. Found U-Boot script /boot.scr
  220. 3252 bytes read in 11 ms (288.1 KiB/s)
  221. ## Executing script at 00500000
  222. Boot script loaded from mmc 1
  223. 185 bytes read in 7 ms (25.4 KiB/s)
  224. 29237528 bytes read in 2370 ms (11.8 MiB/s)
  225. 32295424 bytes read in 2611 ms (11.8 MiB/s)
  226. 107311 bytes read in 83 ms (1.2 MiB/s)
  227. ** File not found /dtb/rockchip/overlay/rockchip-rk3588-fixup.scr **
  228. Unknown command 'kaslrseed' - try 'help'
  229. Fdt Ramdisk skip relocation
  230. No misc partition
  231. ## Loading init Ramdisk from Legacy Image at 0a200000 ...
  232. Image Name: uInitrd
  233. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  234. Data Size: 29237464 Bytes = 27.9 MiB
  235. Load Address: 00000000
  236. Entry Point: 00000000
  237. Verifying Checksum ... OK
  238. ## Flattened Device Tree blob at 0x0a100000
  239. Booting using the fdt blob at 0x0a100000
  240. reserving fdt memory region: addr=a100000 size=80000
  241. Using Device Tree in place at 000000000a100000, end 000000000a182fff
  242. can't found rockchip,drm-logo, use rockchip,fb-logo
  243. WARNING: could not set reg FDT_ERR_BADOFFSET.
  244. failed to reserve fb-loader-logo memory
  245. Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
  246. Total: 6276.271 ms
  247.  
  248. Starting kernel ...
  249.  
  250. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  251. [ 0.000000] Linux version 6.1.0-rockchip64 (root@misko-virtual-machine) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP PREEMPT Wed Dec 21 01:20:55 CET 2022
  252. [ 0.000000] Machine model: Radxa Rock 5B Board
  253. [ 0.000000] efi: UEFI not found.
  254. [ 0.000000] NUMA: No NUMA configuration found
  255. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000efffffff]
  256. [ 0.000000] NUMA: NODE_DATA [mem 0xef7e9480-0xef7ebfff]
  257. [ 0.000000] Zone ranges:
  258. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
  259. [ 0.000000] DMA32 empty
  260. [ 0.000000] Normal empty
  261. [ 0.000000] Movable zone start for each node
  262. [ 0.000000] Early memory node ranges
  263. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
  264. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
  265. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  266. [ 0.000000] cma: Reserved 384 MiB at 0x00000000d3a00000
  267. [ 0.000000] psci: probing for conduit method from DT.
  268. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  269. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  270. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  271. [ 0.000000] psci: SMC Calling Convention v1.2
  272. [ 0.000000] ------------[ cut here ]------------
  273. [ 0.000000] WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:47 set_nr_cpu_ids.part.8+0x4/0x10
  274. [ 0.000000] Modules linked in:
  275. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rockchip64 #trunk
  276. [ 0.000000] Hardware name: Radxa Rock 5B Board (DT)
  277. [ 0.000000] pstate: 800000c9 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  278. [ 0.000000] pc : set_nr_cpu_ids.part.8+0x4/0x10
  279. [ 0.000000] lr : setup_nr_cpu_ids+0x28/0x34
  280. [ 0.000000] sp : ffff800009bf3e10
  281. [ 0.000000] x29: ffff800009bf3e10 x28: ffff0000ef7ec940 x27: ffff800009825108
  282. [ 0.000000] x26: 0000000000000000 x25: ffff800009825108 x24: ffff8000096943f8
  283. [ 0.000000] x23: ffff800009694000 x22: ffff800009bf9980 x21: ffff800009826100
  284. [ 0.000000] x20: 0000000000000000 x19: ffff800009ed3000 x18: 0000000000000001
  285. [ 0.000000] x17: 000000000000002f x16: 00000000ef7ecf38 x15: 37312d3931656431
  286. [ 0.000000] x14: 3839313d74726170 x13: 712e656761726f74 x12: 732d627375206138
  287. [ 0.000000] x11: 0020203d736b7269 x10: 75712e656761726f x9 : 74732d6273752061
  288. [ 0.000000] x8 : 3864313630623231 x7 : 3062362d66666538 x6 : 2d363464372d3037
  289. [ 0.000000] x5 : ffff800009bf9a60 x4 : 00000000000000ff x3 : 0000000000000038
  290. [ 0.000000] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000000000007
  291. [ 0.000000] Call trace:
  292. [ 0.000000] set_nr_cpu_ids.part.8+0x4/0x10
  293. [ 0.000000] start_kernel+0x47c/0x9ec
  294. [ 0.000000] __primary_switched+0xbc/0xc4
  295. [ 0.000000] ---[ end trace 0000000000000000 ]---
  296. [ 0.000000] percpu: Embedded 30 pages/cpu s83496 r8192 d31192 u122880
  297. [ 0.000000] pcpu-alloc: s83496 r8192 d31192 u122880 alloc=30*4096
  298. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  299. [ 0.000000] Detected VIPT I-cache on CPU0
  300. [ 0.000000] CPU features: detected: GIC system register CPU interface
  301. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  302. [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  303. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  304. [ 0.000000] alternatives: applying boot alternatives
  305. [ 0.000000] Fallback order for Node 0: 0
  306. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176
  307. [ 0.000000] Policy zone: DMA
  308. [ 0.000000] Kernel command line: root=UUID=6d85e72a-f287-47f5-8909-19e729be4e92 rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=9 ubootpart=1981de19-1770-7d46-8eff-6b012b061d8a usb-storage.quirks=
  309. [ 0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=1981de19-1770-7d46-8eff-6b012b061d8a", will be passed to user space.
  310. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  311. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  312. [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  313. [ 0.000000] Memory: 3399080K/3930112K available (17152K kernel code, 2930K rwdata, 6596K rodata, 4736K init, 740K bss, 137816K reserved, 393216K cma-reserved)
  314. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=256, Nodes=1
  315. [ 0.000000] trace event string verifier disabled
  316. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  317. [ 0.000000] rcu: RCU event tracing is enabled.
  318. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  319. [ 0.000000] Tracing variant of Tasks RCU enabled.
  320. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 26 jiffies.
  321. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  322. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  323. [ 0.000000] GICv3: 480 SPIs implemented
  324. [ 0.000000] GICv3: 0 Extended SPIs implemented
  325. [ 0.000000] GICv3: MBI range [424:479]
  326. [ 0.000000] GICv3: Using MBI frame 0x00000000fe610000
  327. [ 0.000000] Root IRQ handler: gic_handle_irq
  328. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  329. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  330. [ 0.000000] ITS: No ITS available, not enabling LPIs
  331. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
  332. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
  333. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes to big.
  334. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  335. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  336. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  337. [ 0.000956] Console: colour dummy device 80x25
  338. [ 0.001619] printk: console [tty1] enabled
  339. [ 0.001709] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  340. [ 0.001733] pid_max: default: 32768 minimum: 301
  341. [ 0.001883] LSM: Security Framework initializing
  342. [ 0.001927] Yama: becoming mindful.
  343. [ 0.002034] AppArmor: AppArmor initialized
  344. [ 0.002152] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  345. [ 0.002180] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  346. [ 0.004277] cblist_init_generic: Setting adjustable number of callback queues.
  347. [ 0.004303] cblist_init_generic: Setting shift to 8 and lim to 1.
  348. [ 0.004400] cblist_init_generic: Setting shift to 8 and lim to 1.
  349. [ 0.004593] rcu: Hierarchical SRCU implementation.
  350. [ 0.004607] rcu: Max phase no-delay instances is 1000.
  351. [ 0.009402] EFI services will not be available.
  352. [ 0.009851] smp: Bringing up secondary CPUs ...
  353. [ 0.010436] Detected VIPT I-cache on CPU1
  354. [ 0.010520] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  355. [ 0.010552] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  356. [ 0.011232] Detected VIPT I-cache on CPU2
  357. [ 0.011316] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  358. [ 0.011342] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  359. [ 0.011921] Detected VIPT I-cache on CPU3
  360. [ 0.011998] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  361. [ 0.012022] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  362. [ 0.012637] CPU features: detected: Spectre-v4
  363. [ 0.012640] CPU features: detected: Spectre-BHB
  364. [ 0.012643] Detected PIPT I-cache on CPU4
  365. [ 0.012686] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  366. [ 0.01269tected: CRC32 instructions
  367. [ 0.014874] CPU features: detected: RCpc load-acquire (LDAPR)
  368. [ 0.014884] CPU features: detected: LSE atomic instructions
  369. [ 0.014895] CPU features: detected: Privileged Access Never
  370. [ 0.014905] CPU features: detected: RAS Extension Support
  371. [ 0.014918] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  372. [ 0.014998] CPU: All CPU(s) started at EL2
  373. [ 0.015009] alternatives: applying system-wide alternatives
  374. [ 0.020000] devtmpfs: initialized
  375. [ 0.025637] Registered cp15_barrier emulation handler
  376. [ 0.025649] Registered setend emulation handler
  377. [ 0.025737] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  378. [ 0.025756] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  379. [ 0.028078] pinctrl core: initialized pinctrl subsystem
  380. [ 0.028264] DMI not present or invalid.
  381. [ 0.028569] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  382. [ 0.029416] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  383. [ 0.029850] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  384. [ 0.030116] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  385. [ 0.030141] audit: initializing netlink subsys (disabled)
  386. [ 0.030262] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
  387. [ 0.030914] thermal_sys: Registered thermal governor 'fair_share'
  388. [ 0.030918] thermal_sys: Registered thermal governor 'bang_bang'
  389. [ 0.030923] thermal_sys: Registered thermal governor 'step_wise'
  390. [ 0.030927] thermal_sys: Registered thermal governor 'user_space'
  391. [ 0.030931] thermal_sys: Registered thermal governor 'power_allocator'
  392. [ 0.030962] cpuidle: using governor ladder
  393. [ 0.030986] cpuidle: using governor menu
  394. [ 0.031081] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  395. [ 0.031190] ASID allocator initialised with 65536 entries
  396. [ 0.031759] Serial: AMBA PL011 UART driver
  397. [ 0.045080] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
  398. [ 0.045288] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
  399. [ 0.045489] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
  400. [ 0.045681] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
  401. [ 0.045879] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
  402. [ 0.046673] KASLR disabled due to lack of seed
  403. [ 0.050841] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  404. [ 0.050848] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
  405. [ 0.050854] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  406. [ 0.050858] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
  407. [ 0.050862] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  408. [ 0.050866] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
  409. [ 0.050871] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  410. [ 0.050875] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  411. [ 0.051384] cryptd: max_cpu_qlen set to 1000
  412. [ 0.118470] raid6: neonx8 gen() 5941 MB/s
  413. [ 0.186556] raid6: neonx4 gen() 5877 MB/s
  414. [ 0.254649] raid6: neonx2 gen() 5611 MB/s
  415. [ 0.322720] raid6: neonx1 gen() 4597 MB/s
  416. [ 0.390801] raid6: int64x8 gen() 2993 MB/s
  417. [ 0.458885] raid6: int64x4 gen() 3022 MB/s
  418. [ 0.526964] raid6: int64x2 gen() 2686 MB/s
  419. [ 0.595044] raid6: int64x1 gen() 2193 MB/s
  420. [ 0.595048] raid6: using algorithm neonx8 gen() 5941 MB/s
  421. [ 0.663122] raid6: .... xor() 4705 MB/s, rmw enabled
  422. [ 0.663126] raid6: using neon recovery algorithm
  423. [ 0.663423] ACPI: Interpreter disabled.
  424. [ 0.663810] iommu: Default domain type: Translated
  425. [ 0.663816] iommu: DMA domain TLB invalidation policy: strict mode
  426. [ 0.664028] SCSI subsystem initialized
  427. [ 0.664122] libata version 3.00 loaded.
  428. [ 0.664205] usbcore: regisMU driver, 7 counters available
  429. [ 0.678862] kvm [1]: IPA Size Limit: 40 bits
  430. [ 0.678875] kvm [1]: GICv3: no GICV resource entry
  431. [ 0.678880] kvm [1]: disabling GICv2 emulation
  432. [ 0.678892] kvm [1]: GIC system register CPU interface enabled
  433. [ 0.679018] kvm [1]: vgic interrupt IRQ18
  434. [ 0.679157] kvm [1]: VHE mode initialized successfully
  435. [ 0.679963] Initialise system trusted keyrings
  436. [ 0.679995] Key type blacklist registered
  437. [ 0.680118] workingset: timestamp_bits=42 max_order=20 bucket_order=0
  438. [ 0.682196] zbud: loaded
  439. [ 0.682831] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  440. [ 0.683149] fuse: init (API version 7.37)
  441. [ 0.684225] integrity: Platform Keyring initialized
  442. [ 0.703120] xor: measuring software checksum speed
  443. [ 0.704261] 8regs : 8655 MB/sec
  444. [ 0.705422] 32regs : 8498 MB/sec
  445. [ 0.706382] arm64_neon : 10345 MB/sec
  446. [ 0.706386] xor: using function: arm64_neon (10345 MB/sec)
  447. [ 0.706393] Key type asymmetric registered
  448. [ 0.706397] Asymmetric key parser 'x509' registered
  449. [ 1.381907] Freeing initrd memory: 28548K
  450. [ 1.394158] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  451. [ 1.394210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  452. [ 1.394296] io scheduler mq-deadline registered
  453. [ 1.394301] io scheduler kyber registered
  454. [ 1.394391] io scheduler bfq registered
  455. [ 1.397162] EINJ: ACPI disabled.
  456. [ 1.401779] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
  457. [ 1.401787] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  458. [ 1.402308] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
  459. [ 1.402314] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  460. [ 1.402809] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
  461. [ 1.402814] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  462. [ 1.405892] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
  463. [ 1.406872] printk: console [ttyS2] disabled
  464. [ 1.406898] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 38, base_baud = 1500000) is a 16550A
  465. [ 1.541406] printk: console [ttyS2] enabled
  466. [ 1.542090] Serial: AMBA driver
  467. [ 1.546492] brd: module loaded
  468. [ 1.549280] loop: module loaded
  469. [ 1.551738] thunder_xcv, ver 1.0
  470. [ 1.552033] thunder_bgx, ver 1.0
  471. [ 1.552324] nicpf, ver 1.0
  472. [ 1.552737] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  473. [ 1.553366] hns3: Copyright (c) 2017 Huawei Corporation.
  474. [ 1.553856] hclge is initializing
  475. [ 1.554532] VFIO - User Level meta-driver version: 0.3
  476. [ 1.555865] usbcore: registered new interface driver usb-storage
  477. [ 1.556933] mousedev: PS/2 mouse device common for all mice
  478. [ 1.557635] i2c_dev: i2c /dev entries driver
  479. [ 1.559205] sdhci: Secure Digital Host Controller Interface driver
  480. [ 1.559744] sdhci: Copyright(c) Pierre Ossman
  481. [ 1.560236] Synopsys Designware Multimedia Card Interface Driver
  482. [ 1.560985] sdhci-pltfm: SDHCI platform and OF driver helper
  483. [ 1.562519] ledtrig-cpu: registered to indicate activity on CPUs
  484. [ 1.563123] No iBFT detected.
  485. [ 1.563445] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  486. [ 1.564045] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
  487. [ 1.564822] hid: raw HID events driver (C) Jiri Kosina
  488. [ 1.565298] usbcore: registered new interface driver usbhid
  489. [ 1.565791] usbhid: USB HID core driver
  490. [ 1.566936] optee: probing for conduit method.
  491. [ 1.567327] optee: api uid mismatch
  492. [ 1.567633] optee: probe of firmware:optee failed with error -22
  493. [ 1.568834] NET: Registered PF_INET6 protocol family
  494. [ 1.582487] Segment Routing with IPv6
  495. [ 1.582833] In-situ OAM (IOAM) with IPv6
  496. [ 1.583213] NET: Registered PF_PACKET protocol family
  497. [ 1.583940] 8021q: 802.1Q VLAN Support v1.8
  498. [ 1.584339] Key type dns_resolver registered
  499. [ 1.585263] registered taskstats version 1
  500. [ 1.585628] Loading compiled-in X.509 certificates
  501. [ 1.588092] Loaded X.509 cert 'Build time autogenerated kernel key: 1f57e655c9baf28d3d1422fde4bb69c93b009fc0'
  502. [ 1.592089] zswap: loaded using pool zstd/z3fold
  503. [ 1.592936] Key type .fscrypt registered
  504. [ 1.593280] Key type fscrypt-provisioning registered
  505. [ 1.593525] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
  506. [ 1.594533] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  507. [ 1.595678] Key type encrypted registered
  508. [ 1.596042] AppArmor: AppArmor sha1 policy hashing enabled
  509. [ 1.596532] ima: No TPM chip found, activating TPM-bypass!
  510. [ 1.597019] ima: Allocated hash algorithm: sha1
  511. [ 1.597424] ima: No architecture policies found
  512. [ 1.597845] evm: Initialising EVM extended attributes:
  513. [ 1.598294] evm: security.selinux
  514. [ 1.598584] evm: security.SMACK64
  515. [ 1.598873] evm: security.SMACK64EXEC
  516. [ 1.599194] evm: security.SMACK64TRANSMUTE
  517. [ 1.599551] evm: security.SMACK64MMAP
  518. [ 1.599870] evm: security.apparmor
  519. [ 1.600168] evm: security.ima
  520. [ 1.600427] evm: security.capability
  521. [ 1.600740] evm: HMAC attrs: 0x1
  522. [ 1.627257] printk: console [netcon0] enabled
  523. [ 1.627649] netconsole: network logging started
  524. [ 1.628176] psci_checker: PSCI checker started using 8 CPUs
  525. [ 1.628663] psci_checker: Starting hotplug tests
  526. [ 1.629067] psci_checker: Trying to turn off and on again all CPUs
  527. [ 1.630795] psci: CPU0 killed (polled 0 ms)
  528. [ 1.634866] psci: CPU1 killed (polled 0 ms)
  529. [ 1.638373] psci: CPU2 killed (polled 0 ms)
  530. [ 1.641578] psci: CPU3 killed (polled 0 ms)
  531. [ 1.642909] psci: CPU4 killed (polled 0 ms)
  532. [ 1.644189] psci: CPU5 killed (polled 0 ms)
  533. [ 1.645518] psci: CPU6 killed (polled 0 ms)
  534. [ 1.646795] Detected VIPT I-cache on CPU0
  535. [ 1.647207] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  536. [ 1.647852] CPU0: Booted secondary processor 0x0000000000 [0x412fd050]
  537. [ 1.649671] Detected VIPT I-cache on CPU1
  538. [ 1.650073] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  539. [ 1.650724] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  540. [ 1.652897] Detected VIPT I-cache on CPU2
  541. [ 1.653293] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  542. [ 1.653939] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  543. [ 1.656411] Detected VIPT I-cache on CPU3
  544. [ 1.656806] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  545. [ 1.657450] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  546. [ 1.660266] CPU features: detected: Hardware dirty bit management
  547. [ 1.660809] Detected PIPT I-cache on CPU4
  548. [ 1.661187] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  549. [ 1.661814] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  550. [ 1.663869] Detected PIPT I-cache on CPU5
  551. [ 1.664263] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  552. [ 1.664896] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  553. [ 1.666816] Detected PIPT I-cache on CPU6
  554. [ 1.667206] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  555. [ 1.667834] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  556. [ 1.669366] psci_checker: Trying to turn off and on again group 0 (CPUs 0-7)
  557. [ 1.670757] psci: CPU0 killed (polled 0 ms)
  558. [ 1.674581] psci: CPU1 killed (polled 0 ms)
  559. [ 1.677967] psci: CPU2 killed (polled 0 ms)
  560. [ 1.681006] psci: CPU3 killed (polled 0 ms)
  561. [ 1.682365] psci: CPU4 killed (polled 0 ms)
  562. [ 1.683663] psci: CPU5 killed (polled 0 ms)
  563. [ 1.684651] psci: CPU6 killed (polled 0 ms)
  564. [ 1.685810] Detected VIPT I-cache on CPU0
  565. [ 1.686218] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  566. [ 1.686857] CPU0: Booted secondary processor 0x0000000000 [0x412fd050]
  567. [ 1.688617] Detected VIPT I-cache on CPU1
  568. [ 1.689013] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  569. [ 1.689660] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  570. [ 1.691806] Detected VIPT I-cache on CPU2
  571. [ 1.692201] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  572. [ 1.692844] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  573. [ 1.695799] Detected VIPT I-cache on CPU3
  574. [ 1.696225] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  575. [ 1.696871] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  576. [ 1.699677] Detected PIPT I-cache on CPU4
  577. [ 1.700059] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  578. [ 1.700685] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  579. [ 1.702543] Detected PIPT I-cache on CPU5
  580. [ 1.702933] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  581. [ 1.703560] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  582. [ 1.705346] Detected PIPT I-cache on CPU6
  583. [ 1.705734] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  584. [ 1.706361] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  585. [ 1.707855] psci_checker: Hotplug tests passed OK
  586. [ 1.708270] psci_checker: Starting suspend tests (10 cycles per state)
  587. [ 1.709567] psci_checker: CPU 7 entering suspend cycles, states 1 through 1
  588. [ 1.709567] psci_checker: CPU 6 entering suspend cycles, states 1 through 1
  589. [ 1.709567] psci_checker: CPU 4 entering suspend cycles, states 1 through 1
  590. [ 1.709569] psci_checker: CPU 5 entering suspend cycles, states 1 through 1
  591. [ 1.709572] psci_checker: CPU 2 entering suspend cycles, states 1 through 1
  592. [ 1.709572] psci_checker: CPU 1 entering suspend cycles, states 1 through 1
  593. [ 1.709573] psci_checker: CPU 3 entering suspend cycles, states 1 through 1
  594. [ 1.709574] psci_checker: CPU 0 entering suspend cycles, states 1 through 1
  595. [ 1.753680] psci_checker: CPU 0 suspend test results: success 10, shallow states 0, errors 0
  596. [ 1.754480] psci_checker: CPU 1 suspend test results: success 0, shallow states 10, errors 0
  597. [ 1.755279] psci_checker: CPU 2 suspend test results: success 10, shallow states 0, errors 0
  598. [ 1.756072] psci_checker: CPU 3 suspend test results: success 9, shallow states 1, errors 0
  599. [ 1.756851] psci_checker: CPU 4 suspend test results: success 9, shallow states 1, errors 0
  600. [ 1.757600] psci_checker: CPU 5 suspend test results: success 10, shallow states 0, errors 0
  601. [ 1.758362] psci_checker: CPU 6 suspend test results: success 10, shallow states 0, errors 0
  602. [ 1.759118] psci_checker: CPU 7 suspend test results: success 9, shallow states 1, errors 0
  603. [ 1.759869] psci_checker: Suspend tests passed OK
  604. [ 1.760281] psci_checker: PSCI checker completed
  605. [ 1.760685] of_cfs_init
  606. [ 1.760916] of_cfs_init: OK
  607. [ 1.762893] Freeing unused kernel memory: 4736K
  608. [ 1.821857] Run /init as init process
  609. [ 1.822198] with arguments:
  610. [ 1.822469] /init
  611. [ 1.822678] with environment:
  612. [ 1.822963] HOME=/
  613. [ 1.823180] TERM=linux
  614. [ 1.823427] splash=verbose
  615. [ 1.823704] ubootpart=1981de19-1770-7d46-8eff-6b012b061d8a
  616. [ 3.201586] dw-apb-uart feb50000.serial: forbid DMA for kernel console
  617.  
  618.  
  619.  
  620.  
  621.  
  622.  
  623. done.
  624. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  625. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  626. done.
  627.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!