<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 2.6.35.7-cyanogenmod (toastcfh@OlDsChOoL-EVO) (gcc version 4.4.0 (GCC) ) #122 PREEMPT Fri Oct 29 23:40:46 EDT 2010
<4>[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
<4>[    0.000000] Machine: supersonic
<7>[    0.000000] find the skuid tag
<7>[    0.000000] parse_tag_skuid: hwid = 0x23303
<6>[    0.000000] supersonic_fixup:skuid=0x23303
<7>[    0.000000] find the smi tag
<7>[    0.000000] parse_tag_smi: smi size = 0
<7>[    0.000000] find the hwid tag
<7>[    0.000000] parse_tag_hwid: hwid = 0x0
<7>[    0.000000] find the skuid tag
<7>[    0.000000] parse_tag_skuid: hwid = 0x23303
<7>[    0.000000] tag_panel_parsing: panel type = 0
<7>[    0.000000] find the engineer tag
<7>[    0.000000] parse_tag_engineerid: hwid = 0x0
<7>[    0.000000] find the die size tag
<7>[    0.000000] parse_tag_monodie: die size = 0x0
<6>[    0.000000] CAM_AWB_CAL Data size = 514 , 0x59504550, size = 2048
<4>[    0.000000] Ignoring unrecognised tag 0x59504551
<4>[    0.000000] Ignoring unrecognised tag 0x41387898
<4>[    0.000000] BT Data size= 4, 0x43294329,38,e7,d8,38,71,18,00,00,Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 108544
<7>[    0.000000] free_area_init_node: node 0, pgdat c049d5dc, node_mem_map c0558000
<7>[    0.000000]   Normal zone: 896 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 107648 pages, LIFO batch:31
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 107648
<5>[    0.000000] Kernel command line: board_supersonic.disable_uart3=0 board_supersonic.usb_h2w_sw=0 board_supersonic.disable_sdcard=0 diag.enabled=0 board_supersonic.debug_uart=0 smisize=0 userdata_sel=0 androidboot.emmc=false  androidboot.baseband=2.15.00.07.28 androidboot.cid=SPCS_001 androidboot.batt_poweron=die_battery androidboot.carrier=COMMON androidboot.mid=PC3610000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT05KHL09752 androidboot.bootloader=0.76.2000 no_console_suspend=1 console=null
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 232MB 192MB = 424MB total
<5>[    0.000000] Memory: 424760k/424760k available, 9416k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xffa00000 - 0xffe00000   (   4 MB)
<5>[    0.000000]     vmalloc : 0xdc800000 - 0xf8000000   ( 440 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
<5>[    0.000000]       .init : 0xc0008000 - 0xc0026000   ( 120 kB)
<5>[    0.000000]       .text : 0xc0026000 - 0xc0449000   (4236 kB)
<5>[    0.000000]       .data : 0xc046a000 - 0xc049dc00   ( 207 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
<6>[    0.000000] 	Verbose stalled-CPUs detection is disabled.
<6>[    0.000000] NR_IRQS:332
<6>[    0.000000] Calibrating delay loop... 509.54 BogoMIPS (lpj=2547712)
<6>[    0.229461] pid_max: default: 32768 minimum: 301
<4>[    0.229675] Mount-cache hash table entries: 512
<6>[    0.229980] Initializing cgroup subsys cpuacct
<6>[    0.230010] Initializing cgroup subsys blkio
<6>[    0.230010] Initializing cgroup subsys bfqio
<6>[    0.230041] CPU: Testing write buffer coherency: ok
<6>[    0.231506] regulator: core version 0.5
<6>[    0.231658] NET: Registered protocol family 16
<4>[    0.232086] supersonic_init() revision=3
<6>[    4.390136] YoYo--BD_ADDRESS=38:e7:d8:38:71:18
<6>[    4.390502] supersonic_init_panel: enter.
<6>[    4.390808] ram_console: got buffer at 3c00000, size 40000
<6>[    4.390899] ram_console: found existing buffer, size 167834, start 167834
<6>[    5.138702] console [ram-1] enabled
<6>[    5.139465] config_supersonic_usb_id_gpios 37 input none pull
<6>[    5.139709] supersonic_init_mmc()+
<4>[    5.139892] config wimax power gpio table
<6>[    5.140319] supersonic_init_mmc()-
<4>[    5.143280] bio: create slab <bio-0> at 0
<6>[    5.144195] mdp_probe: initialized
<6>[    5.144500] msm_i2c_probe
<6>[    5.144805] msm_i2c_probe: clk_ctl 35d, 100000 Hz
<3>[    8.112579] msm_i2c msm_i2c.0: Error waiting for notbusy
<3>[    8.112792] msm_i2c msm_i2c.0: Still busy after xfer completion (48)
<3>[    8.112945] msm_i2c msm_i2c.0: Transaction timed out
<3>[    8.113159] msm_i2c msm_i2c.0: Error during data xfer (-110) @48
<4>[    8.113342] msm_i2c msm_i2c.0: Still the bus master, status a700, intf 0
<4>[    8.113586] msm_i2c msm_i2c.0: i2c_scl: 1, i2c_sda: 1
<6>[    8.113800] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status d0, intf 300
<3>[    8.114074] tps65023 0-0048: Read from reg 0x6 failed
<6>[    8.114196] regulator: dcdc1: 1000 <--> 1300 mV
<6>[    8.114501] regulator: dcdc2: 1260 mV
<6>[    8.114685] regulator: dcdc3: 800 <--> 3300 mV at 1800 mV
<3>[   11.086425] msm_i2c msm_i2c.0: Error waiting for notbusy
<3>[   11.086547] msm_i2c msm_i2c.0: Still busy after xfer completion (48)
<3>[   11.086761] msm_i2c msm_i2c.0: Transaction timed out
<3>[   11.086914] msm_i2c msm_i2c.0: Error during data xfer (-110) @48
<4>[   11.087188] msm_i2c msm_i2c.0: Still the bus master, status a700, intf 0
<4>[   11.087310] msm_i2c msm_i2c.0: i2c_scl: 0, i2c_sda: 0
<6>[   11.087646] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status d0, intf 300
<3>[   11.087799] tps65023 0-0048: Read from reg 0x8 failed
<6>[   11.088043] regulator: ldo1: 1000 <--> 3150 mV
<6>[   11.088226] regulator: ldo2: 3300 mV
<6>[   11.088989] Bluetooth: Core ver 2.15
<6>[   11.089263] NET: Registered protocol family 31
<6>[   11.089385] Bluetooth: HCI device and connection manager initialized
<6>[   11.089599] Bluetooth: HCI socket layer initialized
<6>[   11.089813] Switching to clocksource gp_timer
<7>[   11.090820] spi clk = 0x960000
<4>[   11.090942] spi: SPI_CONFIG=88
<4>[   11.091064] spi: SPI_IO_CONTROL=401
<4>[   11.091186] spi: SPI_OPERATIONAL=85
<4>[   11.091430] spi: SPI_ERROR_FLAGS_EN=7f
<4>[   11.091552] spi: SPI_ERROR_FLAGS=0
<4>[   11.091674] -msm_spi_probe()
<6>[   11.092102] NET: Registered protocol family 2
<6>[   11.092315] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[   11.092834] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[   11.093261] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[   11.093597] TCP: Hash tables configured (established 16384 bind 16384)
<6>[   11.093750] TCP reno registered
<6>[   11.093963] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[   11.094116] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[   11.094451] NET: Registered protocol family 1
<6>[   11.094726] Unpacking initramfs...
<6>[   11.105804] Freeing initrd memory: 160K
<6>[   11.106323] smd_init()
<6>[   11.106445] smd_core_init()
<6>[   11.106628] smd_core_init() done
<3>[   11.106750] msm_init_last_radio_log: last radio log is 40000 bytes long
<6>[   11.107177] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
<6>[   11.107391] smd_alloc_channel() cid=01 size=08192 'SMD_DIAG'
<6>[   11.107574] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
<6>[   11.107849] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
<6>[   11.108001] smd_alloc_channel() cid=08 size=08192 'SMD_DATA2'
<6>[   11.108276] smd_alloc_channel() cid=09 size=08192 'SMD_DATA3'
<6>[   11.108459] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
<6>[   11.108734] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
<6>[   11.108917] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
<6>[   11.109191] smd_alloc_channel() cid=15 size=32768 'SMD_DATA9'
<6>[   11.109344] smd_alloc_channel() cid=26 size=08192 'SMD_DATA20'
<6>[   11.109619] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
<6>[   11.109802] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
<3>[   11.110168] smd_alloc_channel() cid 41 does not exist
<6>[   11.110290] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
<6>[   11.110565] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
<6>[   11.110748] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
<3>[   11.111022] smd_alloc_channel() cid 47 does not exist
<6>[   11.111145] smd_alloc_channel() cid=48 size=08192 'SMD_DAL_AM_AUD'
<6>[   11.111419] smd_alloc_channel() cid=49 size=08192 'SMD_DAL00'
<6>[   11.111602] smd_alloc_channel() cid=50 size=08192 'SMD_DATA5_CNTL'
<6>[   11.111877] smd_alloc_channel() cid=51 size=08192 'SMD_DATA6_CNTL'
<6>[   11.112060] smd_alloc_channel() cid=52 size=08192 'SMD_DATA7_CNTL'
<6>[   11.112915] SMD: ch 2 1 -> 2
<6>[   11.114379] tpa2018d1_init
<3>[   11.114807] msm_i2c msm_i2c.0: error, status 43c8 (37)
<3>[   11.115142] msm_i2c msm_i2c.0: Error during data xfer (-5) @37
<3>[   11.115325] smb329: read byte error (-5)
<6>[   11.115539] smb329 version: 0x00
<6>[   11.131103] atmega-microp 0-0066: microp version [04][1F]
<6>[   11.131652] capella_cm3602_probe: probe
<6>[   11.132049] input: proximity as /devices/virtual/input/input0
<3>[   11.132415] capella_cm3602_probe: gpio 109 request failed (-16)
<4>[   11.132873] supersonic_proximity: probe of supersonic_proximity failed with error -16
<3>[   11.229827] smd_alloc_channel() cid 41 does not exist
<3>[   11.230072] smd_alloc_channel() cid 47 does not exist
<6>[   11.230255] batt: A2M_RPC: get_batt_info: batt_id=1, batt_vol=3641, batt_temp=307, batt_current=0, level=16, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7090409001 (1970-01-01 00:00:07.090043177 UTC)
<7>[   11.231781] flashlight: enable flash_adj function
<7>[   11.232055] Registered led device: flashlight
<6>[   11.232177] flashlight_probe: The Flashlight Driver is ready
<6>[   11.241638] ashmem: initialized
<6>[   11.242462] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<7>[   11.242645] yaffs built Oct 29 2010 23:40:19 Installing.
<6>[   11.245635] alg: No test for stdrng (krng)
<6>[   11.245788] io scheduler noop registered
<6>[   11.245910] io scheduler deadline registered
<6>[   11.246215] io scheduler cfq registered
<6>[   11.246398] io scheduler bfq registered (default)
<6>[   11.246826] mddi: init() base=0xdc85c000 irq=16
<7>[   11.247375] mddi runs at 384000000
<6>[   11.248657] mddi cmd send rtd: int 2a000, stat 8023, rtd val 7
<6>[   11.251007] mddi: registering panel mddi_c_4ca3_0000
<6>[   11.251129] mddi: publish:
<7>[   11.251647] mddi_epson_probe
<6>[   11.251892] CABC enabled
<7>[   11.252502] Registered led device: lcd-backlight
<6>[   11.252716] vsync on gpio 98 now 1
<6>[   11.253265] msmfb_probe() installing 480 x 800 panel
<3>[   11.253753] kgsl kgsl: |kgsl_platform_probe| no grp_pclk, continuing
<6>[   11.254730] msm_serial: driver initialized
<6>[   11.255035] msm_serial_hs module loaded
<6>[   11.256896] loop: module loaded
<6>[   11.257171] pmem: 1 init
<6>[   11.257537] pmem_adsp: 1 init
<6>[   11.257843] pmem_venc: 1 init
<6>[   11.258270] AKM8973 compass driver: init
<6>[   11.259735] input: compass as /devices/virtual/input/input1
<6>[   11.260009] a1026_init
<6>[   11.260284] spi_bma150_probe: G-sensor connect with microP: start initial
<6>[   11.391143] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[   11.391693] msm_nand: allocated dma buffer at ffa01000, dma_addr 3bdb8000
<6>[   11.392028] msm_nand: read CFG0 = aa5400c0 CFG1 = 6744a
<6>[   11.392150] msm_nand: CFG0 cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4
<6>[   11.392456] msm_nand: NAND_READ_ID = 5501b3ec
<6>[   11.392761] msn_nand: nandid 5501b3ec status c03120
<6>[   11.393005] msm_nand: manuf Samsung (0xec) device 0xb3 blocksz 20000 pagesz 800 size 40000000
<6>[   11.393218] msm_nand: save CFG0 = e85408c0 CFG1 = 4745e
<6>[   11.393341] msm_nand: CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
<6>[   11.393646] msm_nand: DEV_CMD1: f00f3000
<6>[   11.393829] msm_nand: NAND_EBI2_ECC_BUF_CFG: 1ff
<5>[   11.394073] Creating 7 MTD partitions on "msm_nand":
<5>[   11.394195] 0x00003f360000-0x00003ff60000 : "wimax"
<5>[   11.408355] 0x00003ff60000-0x000040000000 : "misc"
<5>[   11.409851] 0x000004240000-0x000004740000 : "recovery"
<5>[   11.416046] 0x000004740000-0x0000049c0000 : "boot"
<5>[   11.419616] 0x0000049c0000-0x00001a7c0000 : "system"
<5>[   11.805145] 0x00001a7c0000-0x0000247c0000 : "cache"
<5>[   11.982849] 0x0000247c0000-0x00003f360000 : "userdata"
<6>[   12.458709] PPP generic driver version 2.4.2
<6>[   12.458953] PPP Deflate Compression module registered
<6>[   12.459197] PPP BSD Compression module registered
<6>[   12.460021] PPP MPPE Compression module registered
<6>[   12.460266] NET: Registered protocol family 24
<6>[   12.460693] tun: Universal TUN/TAP device driver, 1.6
<6>[   12.460845] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[   12.462097] msm72k_udc: msm72k_probe
<6>[   12.462249] msm72k_udc: msm72k_probe() io=dc860000, irq=58, dma=ffa02000(3bde2000)
<6>[   12.462768] android init
<6>[   12.462921] android_probe pdata: c0473504
<6>[   12.463226] android_bind
<7>[   12.463348] android_bind_config
<6>[   12.463531] android_usb gadget: android_usb ready
<6>[   12.463684] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
<6>[   12.463958] f_adb init
<6>[   12.464080] android_register_function adb
<6>[   12.464324] f_mass_storage init
<6>[   12.464447] android_register_function usb_mass_storage
<6>[   12.464569] f_rndis init
<6>[   12.464874] android_register_function rndis
<6>[   12.464996] rndis_function_bind_config MAC: 00:00:00:00:00:00
<4>[   12.465148] android_usb gadget: using random self ethernet address
<4>[   12.465362] android_usb gadget: using random host ethernet address
<6>[   12.465881] usb0: MAC 96:ba:4b:dc:e4:57
<6>[   12.466003] usb0: HOST MAC 4a:1a:b8:44:d4:3d
<6>[   12.466217] mass_storage_bind_config
<6>[   12.466491] fsg_probe pdata: c04734e4
<6>[   12.466796] msm72k_udc: IDLE -> ONLINE
<6>[   12.467010] hsusb: reset controller
<6>[   12.467346] android_usb gadget: Number of LUNs=1
<6>[   12.467498] adb_bind_config
<6>[   12.467956] atmel_ts_init():
<6>[   12.468170] supersonic_atmel_ts_power(1)
<6>[   12.572814] Touch: 0x01 0x90 0x63 0x27 0x8E 0x00 0x00
<6>[   12.573852] Touch: 0x01 0x00 0x63 0x27 0x8E 0x00 0x00
<6>[   12.591918] Touch: No more message
<6>[   12.611968] info block: 0x80 0x01 0x16 0xAB 0x12 0x0C 0x11
<6>[   12.612091] 2 point multitouch enabled
<6>[   12.613922] Type: 05, Start: 00F2, Size:  9, Instance:  0, RD#:  0,  0
<6>[   12.615234] Type: 06, Start: 00FB, Size:  6, Instance:  0, RD#:  1,  1
<6>[   12.616638] Type: 26, Start: 0101, Size:  8, Instance:  0, RD#:  0,  0
<6>[   12.618041] Type: 07, Start: 0109, Size:  3, Instance:  0, RD#:  0,  0
<6>[   12.619323] Type: 08, Start: 010C, Size:  8, Instance:  0, RD#:  0,  0
<6>[   12.631988] Type: 09, Start: 0114, Size: 1F, Instance:  0, RD#:  A,  2
<6>[   12.652008] Type: 0F, Start: 0133, Size:  B, Instance:  0, RD#:  1,  C
<6>[   12.671997] usb: notify offline
<6>[   12.672119] msm_hsusb: enable pullup
<6>[   12.672271] msm72k_udc: ONLINE -> OFFLINE
<6>[   12.672485] msm_hsusb: disable pullup
<6>[   12.672607] batt:online=0
<6>[   12.672729] batt: Update SMEM: cable type 0 at 8531473183 (1970-01-01 00:00:08.531137817 UTC)
<6>[   12.673217] usb: notify offline
<6>[   12.674621] Type: 12, Start: 013E, Size:  2, Instance:  0, RD#:  0,  0
<6>[   12.692047] Type: 13, Start: 0140, Size: 10, Instance:  0, RD#:  1,  D
<6>[   12.712066] Type: 14, Start: 0150, Size:  C, Instance:  0, RD#:  1,  E
<6>[   12.713775] Type: 16, Start: 015C, Size: 11, Instance:  0, RD#:  1,  F
<6>[   12.715179] Type: 17, Start: 016D, Size:  F, Instance:  0, RD#:  1, 10
<6>[   12.716491] Type: 18, Start: 017C, Size: 13, Instance:  0, RD#:  4, 11
<6>[   12.717864] Type: 19, Start: 018F, Size:  E, Instance:  0, RD#:  1, 15
<6>[   12.719177] Type: 1B, Start: 019D, Size:  7, Instance:  0, RD#:  1, 16
<6>[   12.732086] Type: 1C, Start: 01A4, Size:  6, Instance:  0, RD#:  1, 17
<6>[   12.752105] Type: 25, Start: 0070, Size: 82, Instance:  0, RD#:  0,  0
<6>[   12.752227] finger_type: 2, max finger: 2
<6>[   12.793121] CRC passed: 0x63 0x27 0x8E
<6>[   12.793792] GCAF_level: 20, 24, 28, 40, 63
<6>[   12.793914] filter_level: 46, 100, 923, 978
<6>[   12.794311] input: atmel-touchscreen as /devices/virtual/input/input2
<6>[   12.794647] atmel_qt602240 0-004a: Start touchscreen atmel-touchscreen in interrupt mode
<6>[   12.795135] GPIO Input Driver: Start gpio inputs for supersonic-keypad in interrupt mode
<6>[   12.795532] input: supersonic-keypad as /devices/virtual/input/input3
<6>[   12.796142] input: lightsensor-level as /devices/virtual/input/input4
<6>[   12.796539] set_ls_kvalue: ALS calibrated als_kadc=0x6da500fb
<6>[   12.796661] set_ls_kvalue: als_kadc=0xfb, als_gadc=0x118
<4>[   12.796905] ls_table: data[0] , data[0] = 0, 2
<4>[   12.797027] ls_table: data[1] , data[1] = 0, 6
<4>[   12.797149] ls_table: data[2] , data[2] = 0, a
<4>[   12.797363] ls_table: data[3] , data[3] = 0, 33
<4>[   12.797485] ls_table: data[4] , data[4] = 0, 66
<4>[   12.797729] ls_table: data[5] , data[5] = 0, fa
<4>[   12.797851] ls_table: data[6] , data[6] = 1, 48
<4>[   12.797973] ls_table: data[7] , data[7] = 1, 96
<4>[   12.798187] ls_table: data[8] , data[8] = 1, e4
<4>[   12.798309] ls_table: data[9] , data[9] = 3, ff
<6>[   12.799804] Touch Status: 0x01 0x00 0x63 0x27 0x8E
<7>[   12.814544] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[   12.815002] using input dev supersonic-keypad for key reset
<6>[   12.815673] using rtc device, msm_rtc, for alarms
<6>[   12.815917] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<3>[   12.816192] tpa6130 HP AMP: init
<6>[   12.816619] device-mapper: uevent: version 1.0.3
<6>[   12.817047] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
<6>[   12.817413] Bluetooth: HCI UART driver ver 2.2
<6>[   12.817535] Bluetooth: HCI H4 protocol initialized
<6>[   12.817779] Bluetooth: HCILL protocol initialized
<6>[   12.818634] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[   12.818786] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
<6>[   12.819000] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
<6>[   12.819458] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
<6>[   12.819671] mmc0: 4 bit data mode enabled
<6>[   12.819793] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
<6>[   12.820037] mmc0: Slot eject status = 1
<6>[   12.820159] mmc0: Power save feature enable = 1
<6>[   12.820373] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x3be20000
<6>[   12.820495] mmc0: DM cmd busaddr 0x3be20000, cmdptr busaddr 0x3be20300
<4>[   12.821166] supersonic_wimax_status_register
<4>[   12.821289] supersonic_wimax_status
<6>[   12.821624] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 10,0 dma 8
<6>[   12.821807] mmc1: 4 bit data mode enabled
<6>[   12.821929] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
<6>[   12.822143] mmc1: Slot eject status = 1
<6>[   12.822265] mmc1: Power save feature enable = 1
<6>[   12.822509] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x3be22000
<6>[   12.822631] mmc1: DM cmd busaddr 0x3be22000, cmdptr busaddr 0x3be22300
<6>[   12.823333] supersonic_sdslot_switchvdd: Disabling SD slot power
<6>[   12.823699] mmc2: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
<6>[   12.823913] mmc2: 4 bit data mode enabled
<6>[   12.824035] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
<6>[   12.824279] mmc2: Slot eject status = 0
<6>[   12.824371] mmc2: Power save feature enable = 1
<6>[   12.824615] mmc2: DM non-cached buffer at ffa06000, dma_addr 0x3be23000
<6>[   12.824768] mmc2: DM cmd busaddr 0x3be23000, cmdptr busaddr 0x3be23300
<6>[   12.824981] mmc2: Polling status mode enabled
<7>[   12.825317] Registered led device: button-backlight
<7>[   12.825744] Registered led device: amber
<7>[   12.825927] Registered led device: green
<7>[   12.826110] Registered led device: wimax
<6>[   12.826324] microp_led_probe: succeeded
<6>[   12.827087] logger: created 64K log 'log_main'
<6>[   12.827270] logger: created 256K log 'log_events'
<6>[   12.827575] logger: created 64K log 'log_radio'
<6>[   12.827758] logger: created 64K log 'log_system'
<6>[   12.828155] GACT probability NOT on
<6>[   12.828308] Mirror/redirect action on
<6>[   12.828430] u32 classifier
<6>[   12.828643]     Actions configured
<6>[   12.828765] Netfilter messages via NETLINK v0.30.
<6>[   12.828948] nf_conntrack version 0.5.0 (6639 buckets, 26556 max)
<4>[   12.829376] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[   12.829498] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[   12.829711] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[   12.830047] ctnetlink v0.93: registering with nfnetlink.
<6>[   12.830291] xt_time: kernel timezone is -0000
<6>[   12.830688] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   12.830902] arp_tables: (C) 2002 David S. Miller
<6>[   12.831085] TCP cubic registered
<6>[   12.831512] NET: Registered protocol family 10
<6>[   12.832122] lo: Disabled Privacy Extensions
<6>[   12.832794] Mobile IPv6
<6>[   12.833007] IPv6 over IPv4 tunneling driver
<6>[   12.833526] sit0: Disabled Privacy Extensions
<6>[   12.834045] ip6tnl0: Disabled Privacy Extensions
<6>[   12.834350] NET: Registered protocol family 17
<6>[   12.834503] NET: Registered protocol family 15
<5>[   12.834808] Bridge firewalling registered
<6>[   12.835083] Bluetooth: L2CAP ver 2.14
<6>[   12.835205] Bluetooth: L2CAP socket layer initialized
<6>[   12.835449] Bluetooth: SCO (Voice Link) ver 0.6
<6>[   12.835571] Bluetooth: SCO socket layer initialized
<6>[   12.835845] Bluetooth: RFCOMM TTY layer initialized
<6>[   12.835998] Bluetooth: RFCOMM socket layer initialized
<6>[   12.836120] Bluetooth: RFCOMM ver 1.11
<6>[   12.836334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[   12.836456] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[   12.836791] ThumbEE CPU extension supported.
<6>[   12.837402] clock_late_init() disabled 19 unused clocks
<4>[   12.838348] supersonic_wifi_init: start
<6>[   12.838775] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
<4>[   12.840209] regulator_init_complete: incomplete constraints, leaving ldo2 on
<4>[   12.841003] regulator_init_complete: incomplete constraints, leaving ldo1 on
<4>[   12.841888] regulator_init_complete: incomplete constraints, leaving dcdc3 on
<4>[   12.842681] regulator_init_complete: incomplete constraints, leaving dcdc2 on
<4>[   12.843597] regulator_init_complete: incomplete constraints, leaving dcdc1 on
<6>[   12.845092] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-10-30 22:12:43 UTC (1288476763)
<4>[   12.845428] Warning: unable to open an initial console.
<6>[   12.845581] Freeing init memory: 120K
<6>[   12.892913] yaffs: dev is 32505860 name is "mtdblock4" rw
<6>[   12.893157] yaffs: passed flags ""
<7>[   12.893280] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<6>[   12.910675] supersonic_sdslot_switchvdd: Setting level to 2900 (Success)
<6>[   12.983917] supersonic_sdslot_switchvdd: Setting level to 2850 (Success)
<7>[   13.011840] yaffs: restored from checkpoint
<7>[   13.012420] yaffs_read_super: isCheckpointed 1
<6>[   13.022613] yaffs: dev is 32505862 name is "mtdblock6" rw
<6>[   13.022735] yaffs: passed flags ""
<7>[   13.022857] yaffs: Attempting MTD mount of 31.6,"mtdblock6"
<4>[   13.241912] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[   13.242156] mmc2: new high speed SDHC card at address e26b
<6>[   13.242645] mmcblk0: mmc2:e26b SU08G 7.40 GiB
<6>[   13.243041]  mmcblk0: p1 p2
<7>[   13.644256] block 415 is bad
<7>[   13.765838] block 843 is bad
<7>[   13.944793] block 1471 is bad
<7>[   13.953796] block 1502 is bad
<7>[   14.517364] block 3405 is bad
<6>[   16.258972] batt: M2A_RPC: set_charging: 1 at 12114003670 (2010-10-30 22:12:46.894847562 UTC)
<6>[   16.268554] batt: M2A_RPC: cable_update: USB at 12123576841 (2010-10-30 22:12:46.904451221 UTC)
<6>[   16.268920] batt: htc_cable_status_update: 0 -> 1
<6>[   16.269073] msm72k_udc: OFFLINE -> ONLINE
<6>[   16.269317] hsusb: reset controller
<6>[   16.475372] usb: notify offline
<6>[   16.475494] msm_hsusb: enable pullup
<6>[   16.478637] msm72k_udc: msm72k_udc: suspend
<6>[   16.635467] msm72k_udc: msm72k_udc: reset
<6>[   16.637756] msm72k_udc: msm72k_udc: portchange USB_SPEED_HIGH
<6>[   16.758544] msm72k_udc: msm72k_udc: reset
<6>[   16.760833] msm72k_udc: msm72k_udc: portchange USB_SPEED_HIGH
<6>[   16.918426] batt:online=1
<6>[   16.918640] batt: Update SMEM: cable type 1 at 12773150012 (2010-10-30 22:12:47.553902440 UTC)
<6>[   16.919036] android_usb gadget: high speed config #1: android
<7>[   31.226959] yaffs_read_super: isCheckpointed 0
<6>[   31.300506] yaffs: dev is 32505861 name is "mtdblock5" rw
<6>[   31.300720] yaffs: passed flags ""
<7>[   31.300872] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
<7>[   31.315582] yaffs: restored from checkpoint
<7>[   31.315948] yaffs_read_super: isCheckpointed 1
<3>[   37.652160] init: service 'console' requires console
<3>[   37.656860] init: cannot find '/system/bin/dmagent', disabling 'dmagent'
<3>[   37.657012] init: cannot find '/system/bin/htcipcd', disabling 'htcipcd'
<3>[   37.657257] init: cannot find '/system/bin/iqd', disabling 'iqd'
<3>[   37.657409] init: cannot find '/system/bin/iqfd', disabling 'iqfd'
<6>[   37.726654] enabling adb
<6>[   37.727600] msm_hsusb: disable pullup
<6>[   37.746520] msm_hsusb: enable pullup
<6>[   37.747589] adb_open
<6>[   37.749816] msm72k_udc: msm72k_udc: suspend
<6>[   37.923461] msm72k_udc: msm72k_udc: reset
<6>[   37.923736] usb: notify offline
<6>[   37.924133] adb_release
<6>[   37.924774] adb_open
<6>[   37.925781] msm72k_udc: msm72k_udc: portchange USB_SPEED_HIGH
<6>[   37.964416] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[   38.046478] msm72k_udc: msm72k_udc: reset
<6>[   38.048767] msm72k_udc: msm72k_udc: portchange USB_SPEED_HIGH
<6>[   38.068939] SMD: ch 0 1 -> 2
<6>[   38.070220] qmi: smd closed
<6>[   38.070404] SMD: ch 50 1 -> 2
<6>[   38.070526] qmi: smd opened
<6>[   38.071289] qmi: ctl: wds use client_id 0x01
<6>[   38.073120] qmi: smd closed
<6>[   38.073303] SMD: ch 51 1 -> 2
<6>[   38.073425] qmi: smd opened
<6>[   38.073608] qmi: smd closed
<6>[   38.073822] SMD: ch 52 1 -> 2
<6>[   38.073944] qmi: smd opened
<6>[   38.074401] qmi: ctl: wds use client_id 0x01
<6>[   38.074859] qmi: ctl: wds use client_id 0x01
<6>[   38.204864] batt:online=1
<6>[   38.204986] batt: Update SMEM: cable type 1 at 34038820743 (2010-10-30 22:13:08.819481708 UTC)
<6>[   38.205474] android_usb gadget: high speed config #1: android
<6>[   38.955535] htc-acoustic: open
<3>[   38.956848] smd_alloc_channel() cid 41 does not exist
<3>[   38.957000] smd_alloc_channel() cid 47 does not exist
<6>[   38.959472] htc-acoustic: mmap
<6>[   38.959747] htc-acoustic: ioctl
<6>[   38.960083] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 119.
<6>[   38.961730] htc-acoustic: ioctl: ONCRPC_UPDATE_ADIE_PROC success.
<6>[   38.962738] htc-acoustic: release
<6>[   38.991577] audio: init: codecs
<6>[   38.991973] SMD: ch 43 1 -> 2
<6>[   39.101715] dal_attach: status = 0, name = 'DAL_AQ_AUD'
<6>[   39.101898] audio: init: INIT
<6>[   39.102325] audio: init: OPEN control
<6>[   39.488098] audio: init: attach ACDB
<6>[   39.488433] SMD: ch 48 1 -> 2
<6>[   39.598754] dal_attach: status = 0, name = 'DAL_AM_AUD'
<6>[   39.598937] audio: init: attach ADIE
<6>[   39.599426] dal_attach: status = 0, name = 'DAL_AM_AUD'
<6>[   44.264282] msmfb: pan_update in state(1)
<6>[   44.264282] msmfb: full update starting
<6>[   44.298736] msmfb: full update completed
<6>[   44.299011] msmfb: turning on panel
<7>[   44.299133] supersonic_panel_unblank
<7>[   44.299377] turn on backlight
<7>[   44.299499] set brightness = 128
<6>[   44.433349] msm_kgsl: initilized dev=1 mmu=on
<3>[   44.438201] init: untracked pid 178 exited
<3>[   44.441711] init: untracked pid 179 exited
<6>[   53.004913] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3612, batt_temp=307, batt_current=-514, eval_current=0, level=16, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 48824339035 (2010-10-30 22:13:23.604969513 UTC)
<6>[   53.005462] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3612, batt_temp=307, batt_current=-514, eval_current=0, level=16, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 48824857328 (2010-10-30 22:13:23.605518293 UTC)
<6>[   54.153381] request_suspend_state: wakeup (3->0) at 49971290255 (2010-10-30 22:13:24.752286586 UTC)
<7>[   54.163238] set brightness = 102
<6>[   58.308380] pcm_out: open
<6>[   58.308654] acdb: load 'default.acdb'
<3>[   58.388153] init: untracked pid 316 exited
<6>[   58.389312] acdb: 864 bytes for device 607, rate 48000.
<6>[   58.557403] tpa2018d1_set_speaker_amp: ON
<6>[   63.210968] tpa2018d1_set_speaker_amp: OFF
<6>[   63.218383] pcm_out: release
<3>[   69.398345] msm_pm_wait_state(2, 0, 0, 0) failed 11001
<6>[   69.398345] msm_sleep(): msm_pm_wait_state failed, 11001
<3>[   69.571472] msm_pm_wait_state(2, 0, 0, 0) failed 11001
<6>[   69.571472] msm_sleep(): msm_pm_wait_state failed, 11001
<3>[   71.356506] msm_pm_wait_state(2, 0, 0, 0) failed 11001
<6>[   71.356506] msm_sleep(): msm_pm_wait_state failed, 11001
<6>[   71.707122] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<3>[   71.921691] msm_pm_wait_state(2, 0, 0, 0) failed 11001
<6>[   71.921691] msm_sleep(): msm_pm_wait_state failed, 11001
<6>[   72.087158] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<7>[   72.088531] set brightness = 95
<7>[   72.104278] set brightness = 88
<7>[   72.120391] set brightness = 81
<7>[   72.135925] set brightness = 74
<7>[   72.154632] set brightness = 67
<7>[   72.188598] set brightness = 61
<7>[   72.204254] set brightness = 54
<7>[   72.220977] set brightness = 47
<7>[   72.237854] set brightness = 40
<7>[   72.253936] set brightness = 33
<6>[   72.261596] binder: release 356:356 transaction 3005 out, still active
<7>[   72.270690] set brightness = 27
<7>[   72.286376] set brightness = 20
<7>[   72.303192] set brightness = 13
<7>[   72.319763] set brightness = 6
<7>[   72.336120] set brightness = 0
<6>[   72.336578] request_suspend_state: sleep (0->3) at 68136778060 (2010-10-30 22:13:42.256615854 UTC)
<6>[   72.413238] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[   72.413360] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<6>[   72.422149] msmfb: pan_update in state(4)
<6>[   72.422180] msmfb: drawing while asleep
<7>[   72.431518] supersonic_panel_blank
<7>[   72.431518] set brightness = 0
<7>[   72.432220] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[   72.432312] atmel_ts_suspend: enter
<7>[   72.630187] mddi_epson_power: power off.
<7>[   72.882781] save exit: isCheckpointed 1
<7>[   72.920776] save exit: isCheckpointed 1
<6>[   75.142181] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[   75.143829] request_suspend_state: wakeup (3->0) at 70941259767 (2010-10-30 22:13:45.061097561 UTC)
<7>[   75.145080] set brightness = 6
<7>[   75.178131] set brightness = 13
<7>[   75.191864] set brightness = 20
<7>[   75.208435] set brightness = 27
<7>[   75.224029] set brightness = 34
<7>[   75.240814] set brightness = 40
<6>[   75.243133] <3>mddi_wait_interrupt 32, timeout waiting for 4000, INT = 4000001, STAT = 4000001 gotint = 2a004
<7>[   75.256408] set brightness = 47
<7>[   75.273010] set brightness = 54
<7>[   75.289733] set brightness = 61
<7>[   75.305419] set brightness = 68
<7>[   75.322052] set brightness = 74
<7>[   75.338623] set brightness = 81
<6>[   75.342864] <3>mddi_wait_interrupt 32, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[   75.343109] mddi_epson_power: power on.
<7>[   75.435791] set brightness = 88
<7>[   75.451354] set brightness = 95
<7>[   75.467956] set brightness = 102
<6>[   75.581176] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[   75.601440] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[   75.621612] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<7>[   75.646118] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[   75.659820] msmfb: ready, waiting for full update
<6>[   75.660675] msmfb: pan_update in state(1)
<6>[   75.660766] msmfb: full update starting
<6>[   75.663970] Touch Status: 0x01 0x10 0x63 0x27 0x8E
<6>[   75.669799] Touch Status: 0x01 0x00 0x63 0x27 0x8E
<6>[   75.695251] msmfb: full update completed
<6>[   75.695617] msmfb: turning on panel
<7>[   75.695770] supersonic_panel_unblank
<7>[   75.695892] turn on backlight
<7>[   75.696105] set brightness = 102
<6>[   76.004974] pcm_out: open
<6>[   76.005279] acdb: 864 bytes for device 607, rate 48000.
<6>[   76.164947] tpa2018d1_set_speaker_amp: ON
<7>[   76.488006] ALS value: 0xB, level: 2 #
<6>[   76.613525] S1@124,746
<6>[   76.918090] E1@972,760
<6>[   79.939544] acpuclk_set_vdd_level got regulator
<6>[   80.838531] tpa2018d1_set_speaker_amp: OFF
<6>[   80.845886] pcm_out: release
<4>[   81.920898] wds: 0020 @ 01
<3>[   81.921020] qmi: wds: network start failed (000e)
<3>[   85.168182] msm_pm_wait_state(2, 0, 0, 0) failed 11001
<6>[   85.168182] msm_sleep(): msm_pm_wait_state failed, 11001
<6>[   89.862518] binder: release 533:533 transaction 6164 out, still active
<4>[   92.243041] wds: 0020 @ 01
<6>[   92.243164] qmi: wds: got handle 0x01c64860
<4>[   92.243408] wds: 0022 @ ff
<6>[   92.243499] qmi: wds: CONNECTED
<4>[   92.245849] wds: 002d @ 01
<4>[   92.245941] qmi: got network profile
<6>[   92.246582] rmnet_open()
<6>[   92.246795] SMD: ch 11 1 -> 2