Uncompressing Linux.............................................................
................................................................ done, booting t
he kernel.
Linux version 2.6.31-leapfrog (juls@juls-desktop) (gcc version 4.1.1) #2 Wed Oct
 19 22:35:03 EDT 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: ARM-LF1000
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 4096
free_area_init_node: node 0, pgdat c03ce930, node_mem_map c0407000
  Normal zone: 32 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 4064 pages, LIFO batch:0
lf1000_oscvco_set.65 pll 0, not changed already set to 0x00DF2100
PLL0=393.218109 MHz   PLL1=147.000 MHz   Built 1 zonelists in Zone order, mobili
ty grouping off.  Total pages: 4064
Kernel command line: mem=16M root=179:02 rw rootfstype=ext3 rootdelay=2 debug=7
init=/sbin/init console=ttyS0,115200 ubi.mtd=Brio
PID hash table entries: 64 (order: 6, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 16MB = 16MB total
Memory: 12108KB available (3524K code, 351K data, 124K init, 0K highmem)
NR_IRQS:43
TIM0=  4.593 MHz   TIM1=  4.593 MHz   TIM2=  4.593 MHz   TIM3=  4.593 MHz   TIM4
=  4.593 MHz
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop (skipped) preset value.. 786.43 BogoMIPS (lpj=3932181)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
Error: Driver 'lf1000-clock' is already registered, aborting...
arch/arm/mach-lf1000/gpio_main.c.check_for_touchscreen:1291 X2 == low, no touchs
creen
Reading Board ID =  3
lf1000-dpc lf1000-dpc: screen: 320x240
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
msgmni has been set to 23
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
lf1000-bl lf1000-bl: PWM rate is 9800000
Console: switching to colour frame buffer device 40x30
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 10) is a 8250
brd: module loaded
IRQ 31/lf1000-rtc: IRQF_DISABLED is not guaranteed on shared IRQs
lf1000-rtc: dev (254:0)
lf1000-rtc lf1000-rtc: rtc core: registered lf1000-rtc as rtc0
LF1000 Real Time Clock driver.
i2c /dev entries driver
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (now
ayout= 0)
setAudioRate: expected rate 32000Hz, actual: 32000Hz
nand_get_flash_type(...): Manu_ID = 2c, Dev_ID = da
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit
)
I: chip->options & NAND_NO_SUBPAGE_WRITE = 0
I: chip->options & NAND_CI_CELLTYPE_MSK = 0
I: ecc.steps = 8
I: mtd=c0c35800 mtd->subpage_sft = 2
Scanning device for bad blocks
Bad eraseblock 51 at 0x000000660000
Bad eraseblock 59 at 0x000000760000
Bad eraseblock 65 at 0x000000820000
Bad eraseblock 74 at 0x000000940000
Bad eraseblock 75 at 0x000000960000
Bad eraseblock 80 at 0x000000a00000
Bad eraseblock 81 at 0x000000a20000
Bad eraseblock 82 at 0x000000a40000
Bad eraseblock 83 at 0x000000a60000
Bad eraseblock 84 at 0x000000a80000
Bad eraseblock 916 at 0x000007280000
Bad eraseblock 1433 at 0x00000b320000
Creating 8 MTD partitions on "lf1000-base":
0x000000000000-0x000000020000 : "LF1000_uniboot"
0x000000020000-0x000000100000 : "Atomic_Boot_Flags"
0x000000100000-0x000000200000 : "Manufacturing_Data"
0x000000200000-0x000000400000 : "Kernel0"
0x000000400000-0x000001200000 : "Linux_RFS0"
0x000001200000-0x000001400000 : "Kernel1"
0x000001400000-0x000002200000 : "Linux_RFS1"
0x000002200000-0x000010000000 : "Brio"
Probing nor-flash at physical address 0x80000000 (8-bit bankwidth)
lf1000_flash_probe().96
lf1000_flash_probe().107
lf1000_flash_probe().111
lf1000_flash_probe().118
Probing nor-flash at physical address 0x84000000 (8-bit bankwidth)
lf1000_flash_probe().131
lf1000_flash_probe().137
UBI: attaching mtd7 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI warning: ubi_eba_init_scan: cannot reserve enough PEBs for bad PEB handling,
 reserved 16, need 17
UBI: attached mtd7 to ubi0
UBI: MTD device name:            "Brio"
UBI: MTD device size:            222 MiB
UBI: number of good PEBs:        1774
UBI: number of bad PEBs:         2
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 1774
UBI: number of PEBs reserved for bad PEB handling: 16
UBI: max/mean erase counter: 6/3
UBI: image sequence number: 0
UBI: background thread "ubi_bgt0d" started, PID 261
input: Power Button as /class/input/input0
lf1000-power lf1000-power: lf1000_power_probe.713 status is: 1
lf1000-power lf1000-power: lf1000_power_probe.716 have_external is: 1
lf1000-power lf1000-power: lf1000_power_probe.719 initial battery reading is: 0
input: LF1000 Keyboard as /class/input/input1
resource BUTTON_VOLUMEUP (16) port is undefined (-1)
resource BUTTON_VOLUMEUP (16) pin is undefined (-1)
resource BUTTON_VOLUMEDOWN (17) port is undefined (-1)
resource BUTTON_VOLUMEDOWN (17) pin is undefined (-1)
resource BUTTON_RED (23) port is undefined (-1)
resource BUTTON_RED (23) pin is undefined (-1)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lf1000_rtc_readtime(): 2008-01-02 00:27:59
lf1000-rtc lf1000-rtc: setting system clock to 2008-01-02 00:27:59 UTC (11992336
79)
Waiting 2sec before mounting root device...
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address c7d7
mmcblk0: mmc0:c7d7 SU01G 942 MiB
 mmcblk0: p1 p2
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 124K
init started: BusyBox v1.13.2 (2010-03-16 15:24:13 PDT)
starting pid 289, tty '': '/etc/init.d/rcS'
mount: mounting /dev/mmcblk0p1 on /mnt failed: No such file or directory
lf1000-usbgadget lf1000-usbgadget: probe
input: LF1000 USB as /class/input/input2
lf1000-audio lf1000-audio: isOpen=1
setAudioRate: expected rate 44100Hz, actual: 43885Hz
getAudioRate: sample rate: 43885Hz, divisor: 35, CLKGEN0: 0x00000220
starting pid 306, tty '/dev/ttyS0': '-/bin/sh'
~ # getAudioRate: sample rate: 43885Hz, divisor: 35, CLKGEN0: 0x00000220