daily pastebin goal
54%
SHARE
TWEET

Untitled

a guest Aug 30th, 2016 39 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ===================================================================
  2.                 MT7621   stage1 code 10:33:55 (ASIC)
  3.                 CPU=500000000 HZ BUS=166666666 HZ
  4. ==================================================================
  5. Change MPLL source from XTAL to CR...
  6. do MEMPLL setting..
  7. MEMPLL Config : 0x31100000
  8. 3PLL mode + External loopback
  9. === XTAL-40Mhz === DDR-800Mhz ===
  10. PLL3 FB_DL: 0x10, 1/0 = 650/374 41000000
  11. PLL2 FB_DL: 0x16, 1/0 = 523/501 59000000
  12. PLL4 FB_DL: 0x18, 1/0 = 659/365 61000000
  13. do DDR setting..[01F40000]
  14. Apply DDR3 Setting...(use customer AC)
  15.           0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
  16.       --------------------------------------------------------------------------------
  17. 0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  18. 0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  19. 0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  20. 0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  21. 0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  22. 0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  23. 0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  24. 0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  25. 0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  26. 0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  27. 000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  28. 000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  29. 000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  30. 000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  31. 000E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    1    1    1
  32. 000F:|    0    0    0    0    0    1    1    1    1    1    1    1    1    1    1    1
  33. 0010:|    1    1    1    1    1    1    1    1    1    1    1    1    1    0    0    0
  34. 0011:|    1    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0
  35. 0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  36. 0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  37. 0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  38. 0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  39. 0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  40. 0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  41. 0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  42. 0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  43. 001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  44. 001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  45. 001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  46. 001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  47. 001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  48. 001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  49. rank 0 coarse = 16
  50. rank 0 fine = 48
  51. B:|    0    0    0    0    0    0    0    0    0    1    1    1    0    0    0    0
  52. opt_dle value:10
  53. DRAMC_R0DELDLY[018]=00002B2B
  54. ==================================================================
  55.                 RX      DQS perbit delay software calibration
  56. ==================================================================
  57. 1.0-15 bit dq delay value
  58. ==================================================================
  59. bit|     0  1  2  3  4  5  6  7  8  9
  60. --------------------------------------
  61. 0 |    13 10 12 13 11 10 12 9 9 9
  62. 10 |    10 11 9 12 8 11
  63. --------------------------------------
  64.  
  65. ==================================================================
  66. 2.dqs window
  67. x=pass dqs delay value (min~max)center
  68. y=0-7bit DQ of every group
  69. input delay:DQS0 =43 DQS1 = 43
  70. ==================================================================
  71. bit     DQS0     bit      DQS1
  72. 0  (1~85)43  8  (1~82)41
  73. 1  (1~84)42  9  (1~81)41
  74. 2  (1~82)41  10  (1~83)42
  75. 3  (1~83)42  11  (1~80)40
  76. 4  (1~83)42  12  (1~82)41
  77. 5  (1~84)42  13  (1~80)40
  78. 6  (1~84)42  14  (1~85)43
  79. 7  (1~86)43  15  (1~82)41
  80. ==================================================================
  81. 3.dq delay value last
  82. ==================================================================
  83. bit|    0  1  2  3  4  5  6  7  8   9
  84. --------------------------------------
  85. 0 |    13 11 14 14 12 11 13 9 11 11
  86. 10 |    11 14 11 15 8 13
  87. ==================================================================
  88. ==================================================================
  89.      TX  perbyte calibration
  90. ==================================================================
  91. DQS loop = 15, cmp_err_1 = ffff0000
  92. dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1
  93. dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2
  94. DQ loop=15, cmp_err_1 = ffff0000
  95. dqs_perbyte_dly.last_dqdly_pass[0]=15,  finish count=1
  96. dqs_perbyte_dly.last_dqdly_pass[1]=15,  finish count=2
  97. byte:0, (DQS,DQ)=(8,8)
  98. byte:1, (DQS,DQ)=(8,8)
  99. 20,data:88
  100. [EMI] DRAMC calibration passed
  101.  
  102. ===================================================================
  103.                 MT7621   stage1 code done
  104.                 CPU=500000000 HZ BUS=166666666 HZ
  105. ===================================================================
  106.  
  107.  
  108. U-Boot 1.1.3 (Nov 22 2015 - 17:06:26)
  109.  
  110. Board: Ralink APSoC DRAM:  retrieve addr=0x80000004
  111. retrieve val =0xFFFFFFFE
  112. retrieve addr=0x80000008
  113. retrieve val =0xFFFFFFFD
  114. retrieve addr=0x80000010
  115. retrieve val =0xFFFFFFFB
  116. retrieve addr=0x80000020
  117. retrieve val =0xFFFFFFF7
  118. retrieve addr=0x80000040
  119. retrieve val =0xFFFFFFEF
  120. retrieve addr=0x80000080
  121. retrieve val =0xFFFFFFDF
  122. retrieve addr=0x80000100
  123. retrieve val =0xFFFFFFBF
  124. retrieve addr=0x80000200
  125. retrieve val =0xFFFFFF7F
  126. retrieve addr=0x80000400
  127. retrieve val =0xFFFFFEFF
  128. retrieve addr=0x80000800
  129. retrieve val =0xFFFFFDFF
  130. retrieve addr=0x80001000
  131. retrieve val =0xFFFFFBFF
  132. retrieve addr=0x80002000
  133. retrieve val =0xFFFFF7FF
  134. retrieve addr=0x80004000
  135. retrieve val =0xFFFFEFFF
  136. retrieve addr=0x80008000
  137. retrieve val =0xFFFFDFFF
  138. retrieve addr=0x80010000
  139. retrieve val =0xFFFFBFFF
  140. retrieve addr=0x80020000
  141. retrieve val =0xFFFF7FFF
  142. retrieve addr=0x80040000
  143. retrieve val =0xFFFEFFFF
  144. retrieve addr=0x80080000
  145. retrieve val =0xFFFDFFFF
  146. retrieve addr=0x80100000
  147. retrieve val =0xFFFBFFFF
  148. retrieve addr=0x80200000
  149. retrieve val =0xFFF7FFFF
  150. retrieve addr=0x80400000
  151. retrieve val =0xFFEFFFFF
  152. retrieve addr=0x80800000
  153. retrieve val =0xFFDFFFFF
  154. retrieve addr=0x81000000
  155. retrieve val =0xFFBFFFFF
  156. retrieve addr=0x82000000
  157. retrieve val =0xFF7FFFFF
  158. retrieve addr=0x84000000
  159. retrieve val =0xFEFFFFFF
  160. retrieve addr=0x88000000
  161. retrieve val =0xFDFFFFFF
  162. retrieve addr=0x90000000
  163. retrieve val =0xFBFFFFFF
  164. 512 MB
  165. relocate_code Pointer at: 9bfb8000
  166.  
  167. Config XHCI 40M PLL
  168. flash manufacture id: c2, device id 20 19
  169. find flash: MX25L25635E
  170. *** Warning - bad CRC, using default environment
  171.  
  172. ============================================
  173. Ralink UBoot Version: 4.3.0.0
  174. --------------------------------------------
  175. ASIC MT7621A DualCore (MAC to MT7530 Mode)
  176. DRAM_CONF_FROM: Auto-Detection
  177. DRAM_TYPE: DDR3
  178. DRAM bus: 16 bit
  179. Xtal Mode=3 OCP Ratio=1/3
  180. Flash component: SPI Flash
  181. Date:Nov 22 2015  Time:17:06:26
  182. ============================================
  183. icache: sets:256, ways:4, linesz:32 ,total:32768
  184. dcache: sets:256, ways:4, linesz:32 ,total:32768
  185.  
  186.  ##### The CPU freq = 880 MHZ ####
  187.  estimate memory size =512 Mbytes
  188. #Reset_MT7530
  189.  
  190. Please choose the operation:
  191.    1: Load system code to SDRAM via TFTP.
  192.    2: Load system code then write to Flash via TFTP.
  193.    3: Boot system code via Flash (default).
  194.    4: Entr boot command line interface.
  195.    7: Load Boot Loader code then write to Flash via Serial.
  196.    9: Load Boot Loader code then write to Flash via TFTP.
  197.  
  198. You choosed 2
  199.  
  200.  0
  201.  
  202.    
  203. 2: System Load Linux Kernel then write to Flash via TFTP.
  204.  Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
  205.  Please Input new ones /or Ctrl-C to discard
  206.         Input device IP (10.10.10.123) ==:10.10.10.123
  207.         Input server IP (10.10.10.3) ==:10.10.10.3
  208.         Input Linux Kernel filename () ==:c.bin
  209.  
  210.  netboot_common, argc= 3
  211.  
  212.  NetTxPacket = 0x9BFE4A40
  213.  
  214.  KSEG1ADDR(NetTxPacket) = 0xBBFE4A40
  215.  
  216.  NetLoop,call eth_halt !
  217.  
  218.  NetLoop,call eth_init !
  219. Trying Eth0 (10/100-M)
  220.  
  221.  Waitting for RX_DMA_BUSY status Start... done
  222.  
  223.  
  224.  ETH_STATE_ACTIVE!!
  225. TFTP from server 10.10.10.3; our IP address is 10.10.10.123
  226. Filename 'c.bin'.
  227.  
  228.  TIMEOUT_COUNT=10,Load address: 0x80100000
  229. Loading: checksum bad
  230. checksum bad
  231. Got ARP REPLY, set server/gtwy eth addr (94:de:80:2d:5b:7e)
  232. Got it
  233. #################################################################
  234.          #################################################################
  235.          #################################################################
  236.          #################################################################
  237.          #################################################################
  238.          #################################################################
  239.          #################################################################
  240.          #################################################################
  241.          #################################################################
  242.          #################################################################
  243.          ############################################################Got ARP REQUEST, return our IP
  244. #####
  245.          #################################################################
  246.          #################################################################
  247.          #################################################################
  248.          #################################################################
  249.          #################################################################
  250.          #################################################################
  251.          #################################################################
  252.          ###########################################################
  253. done
  254. Bytes transferred = 6291460 (600004 hex)
  255. NetBootFileXferSize= 00600004
  256. ................................................................................................
  257. ................................................................................................
  258. .
  259. .
  260. Done!
  261. ## Booting image at bfc50000 ...
  262.    Image Name:   MIPS OpenWrt Linux-3.18.39
  263.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
  264.    Data Size:    1239524 Bytes =  1.2 MB
  265.    Load Address: 80001000
  266.    Entry Point:  80001000
  267.    Verifying Checksum ... OK
  268.    Uncompressing Kernel Image ... OK
  269. No initrd
  270. ## Transferring control to Linux (at address 80001000) ...
  271. ## Giving linux memsize in MB, 512
  272. ## Giving linux memstart at, 0x00000000
  273.  
  274. Starting kernel ...
  275.  
  276. [    0.000000] Linux version 3.18.39 (adrian@adrian-dev) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #1 SMP Thu Aug 25 13:03:20 CEST 2016
  277. [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  278. [    0.000000] bootconsole [early0] enabled
  279. [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  280. [    0.000000] MIPS: machine is MQmaker WITI
  281. [    0.000000] Determined physical RAM map:
  282. [    0.000000]  memory: 10000000 @ 00000000 (usable)
  283. [    0.000000] Initrd not found or empty - disabling initrd
  284. [    0.000000] Zone ranges:
  285. [    0.000000]   Normal   [mem 0x00000000-0x0fffffff]
  286. [    0.000000]   HighMem  empty
  287. [    0.000000] Movable zone start for each node
  288. [    0.000000] Early memory node ranges
  289. [    0.000000]   node   0: [mem 0x00000000-0x0fffffff]
  290. [    0.000000] Initmem setup node 0 [mem 0x00000000-0x0fffffff]
  291. [    0.000000] Detected 3 available secondary CPU(s)
  292. [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  293. [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  294. [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  295. [    0.000000] PERCPU: Embedded 9 pages/cpu @8120b000 s5696 r8192 d22976 u36864
  296. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
  297. [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  298. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  299. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  300. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  301. [    0.000000] Writing ErrCtl register=00021994
  302. [    0.000000] Readback ErrCtl register=00021994
  303. [    0.000000] Memory: 255780K/262144K available (2800K kernel code, 143K rwdata, 532K rodata, 160K init, 228K bss, 6364K reserved, 0K highmem)
  304. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  305. [    0.000000] Hierarchical RCU implementation.
  306. [    0.000000] NR_IRQS:256
  307. [    0.000000] gic: revision 3.0
  308. [    0.000000] CPU Clock: 880MHz
  309. [    0.000000] Calibrating delay loop... 580.40 BogoMIPS (lpj=2902016)
  310. [    0.060000] pid_max: default: 32768 minimum: 301
  311. [    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  312. [    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  313. [    0.090000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  314. [    0.090000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  315. [    0.090000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  316. [    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
  317. [    0.190000] Synchronize counters for CPU 1: done.
  318. [    0.190000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  319. [    0.190000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  320. [    0.190000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  321. [    0.200000] CPU2 revision is: 0001992f (MIPS 1004Kc)
  322. [    0.290000] Synchronize counters for CPU 2: done.
  323. [    0.300000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  324. [    0.300000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  325. [    0.300000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  326. [    0.310000] CPU3 revision is: 0001992f (MIPS 1004Kc)
  327. [    0.400000] Synchronize counters for CPU 3: done.
  328. [    0.410000] Brought up 4 CPUs
  329. [    0.420000] pinctrl core: initialized pinctrl subsystem
  330. [    0.430000] NET: Registered protocol family 16
  331. [    0.440000] pull PCIe RST: RALINK_RSTCTRL = 4000000
  332. [    0.740000] release PCIe RST: RALINK_RSTCTRL = 7000000
  333. [    0.750000] ***** Xtal 40MHz *****
  334. [    0.750000] release PCIe RST: RALINK_RSTCTRL = 7000000
  335. [    0.760000] Port 0 N_FTS = 1b102800
  336. [    0.760000] Port 1 N_FTS = 1b102800
  337. [    0.770000] Port 2 N_FTS = 1b102800
  338. [    1.910000]  -> 21007f2
  339. [    1.920000] PCIE0 enabled
  340. [    1.920000] PCIE1 enabled
  341. [    1.930000] PCIE2 enabled
  342. [    1.930000] PCI host bridge /pcie@1e140000 ranges:
  343. [    1.940000]  MEM 0x0000000060000000..0x000000006fffffff
  344. [    1.950000]   IO 0x000000001e160000..0x000000001e16ffff
  345. [    1.990000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  346. [    2.000000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  347. [    2.010000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  348. [    2.020000] PCI host bridge to bus 0000:00
  349. [    2.020000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  350. [    2.030000] pci_bus 0000:00: root bus resource [io  0xffffffff]
  351. [    2.040000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  352. [    2.050000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  353. [    2.060000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  354. [    2.070000] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  355. [    2.080000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  356. [    2.090000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  357. [    2.100000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  358. [    2.110000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  359. [    2.120000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
  360. [    2.130000] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
  361. [    2.140000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  362. [    2.150000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
  363. [    2.160000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
  364. [    2.170000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
  365. [    2.180000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
  366. [    2.190000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
  367. [    2.200000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
  368. [    2.210000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
  369. [    2.220000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
  370. [    2.230000] pci 0000:00:02.0: BAR 7: no space for [io  size 0x1000]
  371. [    2.240000] pci 0000:00:02.0: BAR 7: failed to assign [io  size 0x1000]
  372. [    2.250000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
  373. [    2.260000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
  374. [    2.270000] pci 0000:00:00.0: PCI bridge to [bus 01]
  375. [    2.270000] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
  376. [    2.280000] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
  377. [    2.290000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
  378. [    2.300000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
  379. [    2.310000] pci 0000:00:01.0: PCI bridge to [bus 02]
  380. [    2.310000] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
  381. [    2.320000] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
  382. [    2.330000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
  383. [    2.340000] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
  384. [    2.350000] pci 0000:03:00.0: BAR 4: no space for [io  size 0x0020]
  385. [    2.360000] pci 0000:03:00.0: BAR 4: failed to assign [io  size 0x0020]
  386. [    2.370000] pci 0000:03:00.0: BAR 0: no space for [io  size 0x0008]
  387. [    2.380000] pci 0000:03:00.0: BAR 0: failed to assign [io  size 0x0008]
  388. [    2.390000] pci 0000:03:00.0: BAR 2: no space for [io  size 0x0008]
  389. [    2.400000] pci 0000:03:00.0: BAR 2: failed to assign [io  size 0x0008]
  390. [    2.410000] pci 0000:03:00.0: BAR 1: no space for [io  size 0x0004]
  391. [    2.420000] pci 0000:03:00.0: BAR 1: failed to assign [io  size 0x0004]
  392. [    2.430000] pci 0000:03:00.0: BAR 3: no space for [io  size 0x0004]
  393. [    2.440000] pci 0000:03:00.0: BAR 3: failed to assign [io  size 0x0004]
  394. [    2.450000] pci 0000:00:02.0: PCI bridge to [bus 03]
  395. [    2.450000] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff]
  396. [    2.460000] pci 0000:00:02.0:   bridge window [mem 0x60500000-0x605fffff pref]
  397. [    2.470000] BAR0 at slot 0 = 0
  398. [    2.470000] bus=0x0, slot = 0x0
  399. [    2.480000] BAR0 at slot 1 = 0
  400. [    2.480000] bus=0x0, slot = 0x1
  401. [    2.490000] BAR0 at slot 2 = 0
  402. [    2.490000] bus=0x0, slot = 0x2
  403. [    2.500000] bus=0x1, slot = 0x0, irq=0xff
  404. [    2.500000] bus=0x2, slot = 0x1, irq=0xff
  405. [    2.510000] bus=0x3, slot = 0x2, irq=0x0
  406. [    2.510000] Switched to clocksource MIPS
  407. [    2.520000] NET: Registered protocol family 2
  408. [    2.520000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  409. [    2.540000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  410. [    2.550000] TCP: Hash tables configured (established 2048 bind 2048)
  411. [    2.560000] TCP: reno registered
  412. [    2.570000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  413. [    2.580000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  414. [    2.590000] NET: Registered protocol family 1
  415. [    2.600000] futex hash table entries: 1024 (order: 4, 65536 bytes)
  416. [    2.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  417. [    2.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  418. [    2.660000] msgmni has been set to 499
  419. [    2.660000] io scheduler noop registered
  420. [    2.670000] io scheduler bfq registered (default)
  421. [    2.680000] BFQ I/O-scheduler: v7r8
  422. [    2.690000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  423. [    2.700000] console [ttyS0] disabled
  424. [    2.710000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 34, base_baud = 3125000) is a 16550A
  425. [    2.730000] console [ttyS0] enabled
  426. [    2.730000] console [ttyS0] enabled
  427. [    2.740000] bootconsole [early0] disabled
  428. [    2.740000] bootconsole [early0] disabled
  429. [    2.760000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
  430. [    2.770000] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
  431. [    2.780000] m25p80 spi32766.0: using chunked io
  432. [    2.790000] 4 ofpart partitions found on MTD device spi32766.0
  433. [    2.800000] Creating 4 MTD partitions on "spi32766.0":
  434. [    2.810000] 0x000000000000-0x000000030000 : "u-boot"
  435. [    2.820000] 0x000000030000-0x000000040000 : "u-boot-env"
  436. [    2.830000] 0x000000040000-0x000000050000 : "factory"
  437. [    2.840000] 0x000000050000-0x000001000000 : "firmware"
  438. [    2.910000] 2 uimage-fw partitions found on MTD device firmware
  439. [    2.920000] 0x000000050000-0x00000017ea24 : "kernel"
  440. [    2.930000] 0x00000017ea24-0x000001000000 : "rootfs"
  441. [    2.940000] mtd: device 5 (rootfs) set to be root filesystem
  442. [    2.950000] 1 squashfs-split partitions found on MTD device rootfs
  443. [    2.960000] 0x000000640000-0x000001000000 : "rootfs_data"
  444. [    2.980000] netif_napi_add() called with weight 128 on device eth%d
  445. [    3.000000] change HW-TRAP to 0x17ccf
  446. [    3.010000] ralink_soc_eth 1e100000.ethernet: generated random MAC address 16:6a:44:23:6b:a3
  447. [    3.030000] libphy: mdio: probed
  448. [    3.040000] ralink_soc_eth 1e100000.ethernet: loaded mt7530 driver
  449. [    3.060000] ralink_soc_eth 1e100000.ethernet eth0: ralink at 0xbe100000, irq 11
  450. [    3.070000] mt7621_wdt 1e000100.wdt: Initialized
  451. [    3.080000] TCP: cubic registered
  452. [    3.090000] NET: Registered protocol family 17
  453. [    3.100000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  454. [    3.120000] 8021q: 802.1Q VLAN Support v1.8
  455. [    3.140000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  456. [    3.160000] Freeing unused kernel memory: 160K (80368000 - 80390000)
  457. [    3.220000] random: nonblocking pool is initialized
  458. [    4.310000] init: Console is alive
  459. [    4.320000] init: - watchdog -
  460. [    5.810000] ralink_soc_eth 1e100000.ethernet eth0: port 4 link up
  461. [    6.550000] usbcore: registered new interface driver usbfs
  462. [    6.570000] usbcore: registered new interface driver hub
  463. [    6.580000] usbcore: registered new device driver usb
  464. [    6.620000] SCSI subsystem initialized
  465. [    6.630000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  466. [    6.650000] ehci-platform: EHCI generic platform driver
  467. [    6.670000] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
  468. [    6.690000] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  469. [    6.700000] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  470. [    6.720000] scsi host0: ahci
  471. [    6.730000] scsi host1: ahci
  472. [    6.730000] ata1: SATA max UDMA/133 abar m512@0x60400000 port 0x60400100 irq 33
  473. [    6.750000] ata2: SATA max UDMA/133 abar m512@0x60400000 port 0x60400180 irq 33
  474. [    7.110000] ata1: SATA link down (SStatus 0 SControl 300)
  475. [    7.470000] ata2: SATA link down (SStatus 0 SControl 300)
  476. [    7.480000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  477. [    7.490000] ohci-platform: OHCI generic platform driver
  478. [    7.530000] FM_OUT value: u4FmOut = 0(0x00000000)
  479. [    7.550000] FM_OUT value: u4FmOut = 0(0x00000000)
  480. [    7.570000] FM_OUT value: u4FmOut = 0(0x00000000)
  481. [    7.590000] FM_OUT value: u4FmOut = 0(0x00000000)
  482. [    7.610000] FM_OUT value: u4FmOut = 0(0x00000000)
  483. [    7.630000] FM_OUT value: u4FmOut = 0(0x00000000)
  484. [    7.650000] FM_OUT value: u4FmOut = 0(0x00000000)
  485. [    7.670000] FM_OUT value: u4FmOut = 0(0x00000000)
  486. [    7.690000] FM_OUT value: u4FmOut = 0(0x00000000)
  487. [    7.710000] FM_OUT value: u4FmOut = 0(0x00000000)
  488. [    7.770000] FM_OUT value: u4FmOut = 0(0x00000000)
  489. [    7.790000] FM_OUT value: u4FmOut = 0(0x00000000)
  490. [    7.810000] FM_OUT value: u4FmOut = 0(0x00000000)
  491. [    7.830000] FM_OUT value: u4FmOut = 0(0x00000000)
  492. [    7.850000] FM_OUT value: u4FmOut = 0(0x00000000)
  493. [    7.870000] FM_OUT value: u4FmOut = 0(0x00000000)
  494. [    7.890000] FM_OUT value: u4FmOut = 0(0x00000000)
  495. [    7.910000] FM_OUT value: u4FmOut = 0(0x00000000)
  496. [    7.930000] FM_OUT value: u4FmOut = 0(0x00000000)
  497. [    7.950000] FM_OUT value: u4FmOut = 0(0x00000000)
  498. [    8.100000] xhci-hcd 1e1c0000.xhci: xHCI Host Controller
  499. [    8.110000] xhci-hcd 1e1c0000.xhci: new USB bus registered, assigned bus number 1
  500. [    8.120000] xhci-hcd 1e1c0000.xhci: irq 30, io mem 0x1e1c0000
  501. [    8.140000] hub 1-0:1.0: USB hub found
  502. [    8.140000] hub 1-0:1.0: 2 ports detected
  503. [    8.150000] xhci-hcd 1e1c0000.xhci: xHCI Host Controller
  504. [    8.160000] xhci-hcd 1e1c0000.xhci: new USB bus registered, assigned bus number 2
  505. [    8.180000] hub 2-0:1.0: USB hub found
  506. [    8.190000] hub 2-0:1.0: 1 port detected
  507. [    8.200000] xhci-hcd xhci-hcd: can't request region for resource [mem 0x1e1c0000-0x1e1cffff]
  508. [    8.210000] xhci-hcd: probe of xhci-hcd failed with error -16
  509. [    8.230000] MTK MSDC device init.
  510. [    8.280000] mtk-sd: MediaTek MT6575 MSDC Driver
  511. [    8.290000] sdhci: Secure Digital Host Controller Interface driver
  512. [    8.300000] sdhci: Copyright(c) Pierre Ossman
  513. [    8.310000] sdhci-pltfm: SDHCI platform and OF driver helper
  514. [    8.320000] usbcore: registered new interface driver usb-storage
  515. [    9.330000] init: - preinit -
  516. Press the [f] key and hit [enter] to enter failsafe mode
  517. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  518. [   12.880000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  519. [   12.920000] procd: - early -
  520. [   12.920000] procd: - watchdog -
  521. [   13.710000] procd: - ubus -
  522. [   14.720000] procd: - init -
  523. Please press Enter to activate this console.
  524. [   16.420000] NET: Registered protocol family 10
  525. [   16.440000] RPC: Registered named UNIX socket transport module.
  526. [   16.460000] RPC: Registered udp transport module.
  527. [   16.470000] RPC: Registered tcp transport module.
  528. [   16.470000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  529. [   16.500000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
  530. [   16.520000] Initializing XFRM netlink socket
  531. [   16.530000] NET: Registered protocol family 15
  532. [   16.550000] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  533. [   16.590000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  534. [   16.620000] Netfilter messages via NETLINK v0.30.
  535. [   16.630000] ip_set: protocol 6
  536. [   16.670000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
  537. [   16.690000] Backport generated by backports.git backports-20151218-0-g2f58d9d
  538. [   16.770000] mt76x2e 0000:01:00.0: ASIC revision: 76120044
  539. [   16.800000] ROM patch already applied
  540. [   16.810000] Firmware Version: 0.0.00
  541. [   16.820000] Build: 1
  542. [   16.820000] Build Time: 201507311614____
  543. [   16.850000] Firmware running!
  544. [   16.850000] mt76x2e 0000:02:00.0: ASIC revision: 76020044
  545. [   16.890000] ROM patch already applied
  546. [   16.900000] Firmware Version: 0.0.00
  547. [   16.900000] Build: 1
  548. [   16.910000] Build Time: 201507311614____
  549. [   16.940000] Firmware running!
  550. [   16.950000] i2c /dev entries driver
  551. [   16.960000] i2c-mt7621 1e000900.i2c: loaded
  552. [   16.990000] hidraw: raw HID events driver (C) Jiri Kosina
  553. [   17.010000] u32 classifier
  554. [   17.010000]     input device check on
  555. [   17.020000]     Actions configured
  556. [   17.030000] Mirror/redirect action on
  557. [   17.050000] nf_conntrack version 0.5.0 (3999 buckets, 15996 max)
  558. [   17.080000] usbcore: registered new interface driver cdc_wdm
  559. [   17.100000] ip_tables: (C) 2000-2006 Netfilter Core Team
  560. [   17.220000] usbcore: registered new interface driver usbhid
  561. [   17.230000] usbhid: USB HID core driver
  562. [   17.260000] xt_time: kernel timezone is -0000
  563. [   17.280000] PPP generic driver version 2.4.2
  564. [   17.290000] NET: Registered protocol family 24
  565. [   22.420000] device eth0.1 entered promiscuous mode
  566. [   22.430000] device eth0 entered promiscuous mode
  567. [   22.440000] br-lan: port 1(eth0.1) entered forwarding state
  568. [   22.450000] br-lan: port 1(eth0.1) entered forwarding state
  569. [   24.450000] br-lan: port 1(eth0.1) entered forwarding state
  570. [   26.150000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  571. [   26.160000] jffs2_build_filesystem(): unlocking the mtd device... done.
  572. [   26.180000] jffs2_build_filesystem(): erasing all blocks after the end marker...
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top