wiktorek140

Untitled

Aug 20th, 2017
535
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. sh-3.2# dmesg
  2. [ 0.083618] pinctrl core: initialized pinctrl subsystem
  3. [ 0.083951] regulator-dummy: no parameters
  4. [ 0.086246] NET: Registered protocol family 16
  5. [ 0.089815] DMA: preallocated 256 KiB pool for atomic coherent allocations
  6. [ 0.122017] gpiochip_find_base: found new base at 902
  7. [ 0.122117] gpiochip_add: registered GPIOs 902 to 1023 on device: msm_tlmm_gpio
  8. [ 0.132810] cma: Assigned CMA region at 0 to b017000.qcom,wdt device
  9. [ 0.132984] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
  10. [ 0.138416] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
  11. [ 0.139137] cma: Assigned CMA region at 0 to 8600720.tz-log device
  12. [ 0.143059] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  13. [ 0.147342] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
  14. [ 0.147837] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
  15. [ 0.148249] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
  16. [ 0.148955] ACC: mem_acc_efuse_init: efuse_addr = 0x00058000 (len=0x1000)
  17. [ 0.148981] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0xb022000000800705 @52:1 == 1 ?: no
  18. [ 0.149118] mem_acc_corner: 0 <--> 0 mV
  19. [ 0.151246] persistent_ram: paddr: af000000, vaddr: e6830000, buf size = 0x1fff4
  20. [ 0.151264] persistent_ram: paddr: af020000, vaddr: e6851000, buf size = 0x3fff4
  21. [ 0.152024] persistent_ram: paddr: af060000, vaddr: e6892000, buf size = 0x7f4
  22. [ 0.152691] console [pstore-1] enabled
  23. [ 0.152700] pstore: psi registered
  24. [ 0.152710] ramoops: attached 0x80000@0xaf000000, ecc: 0/0
  25. [ 0.156185] KPI: Bootloader start count = 56761
  26. [ 0.156198] KPI: Bootloader end count = 137092
  27. [ 0.156208] KPI: Bootloader display count = 2551072784
  28. [ 0.156217] KPI: Bootloader load kernel count = 2046
  29. [ 0.156227] KPI: Kernel MPM timestamp = 164436
  30. [ 0.156236] KPI: Kernel MPM Clock frequency = 32768
  31. [ 0.156259] socinfo_print: v8, id=206, ver=1.0, raw_id=1797, raw_ver=0, hw_plat=8, hw_plat_ver=65536
  32. accessory_chip=0, hw_plat_subtype=0, pmic_model=65547, pmic_die_revision=131072
  33. [ 0.156980] smd_channel_probe_worker: allocation table not initialized
  34. [ 0.157110] smd_channel_probe_worker: allocation table not initialized
  35. [ 0.162932] msm_mpm_dev_probe(): Cannot get clk resource for XO
  36. [ 0.162960] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
  37. [ 0.163255] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
  38. [ 0.164635] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  39. [ 0.165056] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  40. [ 0.165470] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  41. [ 0.165927] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle
  42. [ 0.166378] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle
  43. [ 0.166820] 8916_l1: 1225 mV normal idle
  44. [ 0.167271] 8916_l2: 1200 mV normal idle
  45. [ 0.167726] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle
  46. [ 0.168151] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  47. [ 0.168563] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
  48. [ 0.169020] 8916_l4: 2050 mV normal idle
  49. [ 0.169482] 8916_l5: 1800 mV normal idle
  50. [ 0.170143] 8916_l6: 1800 mV normal idle
  51. [ 0.170616] 8916_l7: 1800 mV normal idle
  52. [ 0.171054] 8916_l7_ao: 1800 mV normal idle
  53. [ 0.171490] 8916_l7_so: 1800 mV normal idle
  54. [ 0.171946] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle
  55. [ 0.172416] 8916_l9: 3300 mV normal idle
  56. [ 0.172939] 8916_l10: 1800 mV normal idle
  57. [ 0.173426] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle
  58. [ 0.173887] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle
  59. [ 0.174362] 8916_l13: 3075 mV normal idle
  60. [ 0.174845] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle
  61. [ 0.175324] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle
  62. [ 0.175794] 8916_l16: 1800 <--> 3300 mV at 3100 mV normal idle
  63. [ 0.176486] 8916_l17: 2850 mV normal idle
  64. [ 0.176981] 8916_l18: 2700 mV normal idle
  65. [ 0.177505] 8916_s2: 1050 <--> 1350 mV at 1150 mV
  66. [ 0.177632] spm_regulator_probe: name=8916_s2, range=LV, voltage=1150000 uV, mode=PWM, step rate=1200 uV/us
  67. [ 0.178223] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
  68. [ 0.178264] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x210bca0e77, speed_bits = 0
  69. [ 0.178283] cpr_parse_pvs_version_fuse: apc_corner: [row: 0]: 0xb022000000800705, pvs_version = 0
  70. [ 0.178369] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1062500 1250000] uV
  71. [ 0.178382] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
  72. [ 0.178395] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1162500] uV
  73. [ 0.178643] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xc88e4e0393a541eb
  74. [ 0.178666] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
  75. [ 0.178681] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 915
  76. [ 0.178696] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 915
  77. [ 0.178710] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1287
  78. [ 0.178764] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
  79. [ 0.178776] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.650
  80. [ 0.178792] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 915
  81. [ 0.178802] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 915
  82. [ 0.178812] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 915
  83. [ 0.178823] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 915
  84. [ 0.178833] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1150
  85. [ 0.178843] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1213
  86. [ 0.178853] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1250
  87. [ 0.178864] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1287
  88. [ 0.178874] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1287
  89. [ 0.178921] cpr_populate_opp_table: apc_corner: adding OPP entry failed - OPP may not be enabled, rc=-22
  90. [ 0.178960] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
  91. [ 0.178988] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
  92. [ 0.179002] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
  93. [ 0.179271] apc_corner: 0 <--> 0 mV
  94. [ 0.179999] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  95. [ 0.180095] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
  96. [ 0.180109] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
  97. [ 0.180135] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
  98. [ 0.180293] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  99. [ 0.180369] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
  100. [ 0.180383] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
  101. [ 0.180405] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
  102. [ 0.180618] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
  103. [ 0.180691] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
  104. [ 0.180705] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
  105. [ 0.180727] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
  106. [ 0.182876] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  107. [ 0.182896] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  108. [ 0.182914] msm-thermal qcom,msm-thermal.58: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
  109. [ 0.182932] msm-thermal qcom,msm-thermal.58: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  110. [ 0.182951] msm-thermal qcom,msm-thermal.58: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  111. [ 0.183262] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  112. [ 0.183663] msm-thermal qcom,msm-thermal.58: probe_sensor_info:unable to find DT for sensor-information.KTM continues
  113. [ 0.183683] msm-thermal qcom,msm-thermal.58: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
  114. [ 0.184704] sps:sps is ready.
  115. [ 0.190942] qcom,rpmcc-8916 1800000.qcom,rpmcc: Registered RPM clocks.
  116. [ 0.200069] qcom,gcc-8916 1800000.qcom,gcc: Registered GCC clocks
  117. [ 0.201929] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
  118. [ 0.204332] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  119. [ 0.204457] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  120. [ 0.204471] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  121. [ 0.205116] kworker/u8:2 (47) used greatest stack depth: 6900 bytes left
  122. [ 0.205212] kworker/u8:2 (46) used greatest stack depth: 6784 bytes left
  123. [ 0.205563] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  124. [ 0.205667] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  125. [ 0.205681] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  126. [ 0.206239] kworker/u8:3 (49) used greatest stack depth: 6448 bytes left
  127. [ 0.207027] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
  128. [ 0.207132] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  129. [ 0.207146] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  130. [ 0.240956] bio: create slab <bio-0> at 0
  131. [ 0.242264] of_get_named_gpio_flags: can't parse gpios property
  132. [ 0.242396] dummy_vreg: no parameters
  133. [ 0.243635] SCSI subsystem initialized
  134. [ 0.243880] usbcore: registered new interface driver usbfs
  135. [ 0.243952] usbcore: registered new interface driver hub
  136. [ 0.244064] usbcore: registered new device driver usb
  137. [ 0.244189] media: Linux media interface: v0.10
  138. [ 0.244240] Linux video capture interface: v2.00
  139. [ 0.244463] BATTERY: batterydata_init: Battery-data device created!
  140. [ 0.245898] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  141. [ 0.246019] ION-heap mm: Cannot specify alignment for this type of heap
  142. [ 0.246162] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  143. [ 0.246381] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
  144. [ 0.246574] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
  145. [ 0.246756] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
  146. [ 0.247004] ION heap system created
  147. [ 0.247087] ION heap kmalloc created
  148. [ 0.247104] ION heap mm created at 0xbd800000 with size 2800000
  149. [ 0.247117] ION heap qsecom created at 0x8ec00000 with size 1200000
  150. [ 0.247130] ION heap audio created at 0xbd400000 with size 314000
  151. [ 0.247143] ION heap pil_1 created at 0x8bd00000 with size 600000
  152. [ 0.247155] ION heap pil_2 created at 0x86800000 with size 5500000
  153. [ 0.247274] msm_bus_fabric_init_driver
  154. [ 0.247454] msm_bus_device 580000.ad-hoc-bus: Dev 1024
  155. [ 0.247470] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  156. [ 0.247480] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  157. [ 0.247618] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  158. [ 0.247642] msm_bus_device 580000.ad-hoc-bus: Dev 0
  159. [ 0.247655] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  160. [ 0.247665] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  161. [ 0.247790] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  162. [ 0.247814] msm_bus_device 580000.ad-hoc-bus: Dev 4096
  163. [ 0.247828] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  164. [ 0.247837] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  165. [ 0.247957] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  166. [ 0.250644] msm_bus_init_clk: Valid node clk node 1024 ctx 0
  167. [ 0.250651] msm_bus_init_clk: Valid node clk node 1024 ctx 1
  168. [ 0.250717] msm_bus_init_clk: Valid node clk node 0 ctx 0
  169. [ 0.250722] msm_bus_init_clk: Valid node clk node 0 ctx 1
  170. [ 0.250782] msm_bus_init_clk: Valid node clk node 4096 ctx 0
  171. [ 0.250788] msm_bus_init_clk: Valid node clk node 4096 ctx 1
  172. [ 0.256961] gdsc_venus: no parameters
  173. [ 0.257179] gdsc_mdss: no parameters
  174. [ 0.257365] gdsc_jpeg: no parameters
  175. [ 0.257557] gdsc_vfe: no parameters
  176. [ 0.257778] gdsc_oxili_gx: no parameters
  177. [ 0.258448] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  178. [ 0.259038] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
  179. [ 0.260260] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at e69e0000, with 2 ctx banks
  180. [ 0.264181] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at e6f80000, with 20 ctx banks
  181. [ 0.265072] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  182. [ 0.265185] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  183. [ 0.265284] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
  184. [ 0.265366] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  185. [ 0.265448] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  186. [ 0.265529] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
  187. [ 0.265611] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
  188. [ 0.265691] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  189. [ 0.265771] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  190. [ 0.265852] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  191. [ 0.265947] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  192. [ 0.266030] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
  193. [ 0.266111] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
  194. [ 0.266194] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
  195. [ 0.266276] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  196. [ 0.266359] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  197. [ 0.266445] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  198. [ 0.266536] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  199. [ 0.266622] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  200. [ 0.266714] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  201. [ 0.266795] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  202. [ 0.266876] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  203. [ 0.267637] Advanced Linux Sound Architecture Driver Initialized.
  204. [ 0.268215] Bluetooth: Core ver 2.16
  205. [ 0.268255] NET: Registered protocol family 31
  206. [ 0.268262] Bluetooth: HCI device and connection manager initialized
  207. [ 0.268274] Bluetooth: HCI socket layer initialized
  208. [ 0.268285] Bluetooth: L2CAP socket layer initialized
  209. [ 0.268305] Bluetooth: SCO socket layer initialized
  210. [ 0.268563] cfg80211: Calling CRDA to update world regulatory domain
  211. [ 0.268585] cfg80211: World regulatory domain updated:
  212. [ 0.268591] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  213. [ 0.268599] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  214. [ 0.268606] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  215. [ 0.268614] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  216. [ 0.268621] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  217. [ 0.268628] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  218. [ 0.268636] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  219. [ 0.268644] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  220. [ 0.268651] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  221. [ 0.270179] Switching to clocksource arch_sys_counter
  222. [ 0.298928] mmi,hob_ram hob_ram.65: allocation type: smem
  223. [ 0.299334] NET: Registered protocol family 2
  224. [ 0.299749] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  225. [ 0.299817] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  226. [ 0.299889] TCP: Hash tables configured (established 4096 bind 4096)
  227. [ 0.299932] TCP: reno registered
  228. [ 0.299943] UDP hash table entries: 256 (order: 1, 12288 bytes)
  229. [ 0.299964] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  230. [ 0.300159] NET: Registered protocol family 1
  231. [ 0.300695] gcc-mdss-8916 qcom,gcc-mdss.29: Registered GCC MDSS clocks.
  232. [ 0.301394] Trying to unpack rootfs image as initramfs...
  233. [ 0.323417] Freeing initrd memory: 588K (c2000000 - c2093000)
  234. [ 0.327203] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
  235. [ 0.442813] bounce pool size: 64 pages
  236. [ 0.449402] Registering esdfs 0.2
  237. [ 0.449649] fuse init (API version 7.22)
  238. [ 0.450201] msgmni has been set to 923
  239. [ 0.452283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  240. [ 0.452294] io scheduler noop registered
  241. [ 0.452301] io scheduler deadline registered
  242. [ 0.452319] io scheduler row registered
  243. [ 0.452450] io scheduler cfq registered (default)
  244. [ 0.452539] gpiochip_find_base: found new base at 900
  245. [ 0.452611] gpiochip_add: registered GPIOs 900 to 901 on device: pm8916-mpp
  246. [ 0.452740] qcom,qpnp-pin qpnp-pin-e53c3e00: qpnp_pin_probe: gpio_chip registered between 900-901
  247. [ 0.452785] gpiochip_find_base: found new base at 899
  248. [ 0.452854] gpiochip_add: registered GPIOs 899 to 899 on device: pm8916-gpio
  249. [ 0.452899] qcom,qpnp-pin qpnp-pin-e53e4000: qpnp_pin_probe: gpio_chip registered between 899-899
  250. [ 0.453042] gpiochip_find_base: found new base at 867
  251. [ 0.453109] gpiochip_add: registered GPIOs 867 to 898 on device: smp2p
  252. [ 0.453577] gpiochip_find_base: found new base at 835
  253. [ 0.453649] gpiochip_add: registered GPIOs 835 to 866 on device: smp2p
  254. [ 0.453679] gpiochip_find_base: found new base at 803
  255. [ 0.453744] gpiochip_add: registered GPIOs 803 to 834 on device: smp2p
  256. [ 0.454219] gpiochip_find_base: found new base at 771
  257. [ 0.454287] gpiochip_add: registered GPIOs 771 to 802 on device: smp2p
  258. [ 0.454319] gpiochip_find_base: found new base at 739
  259. [ 0.454384] gpiochip_add: registered GPIOs 739 to 770 on device: slave-kernel
  260. [ 0.454461] platform qcom,smp2pgpio-ssr-smp2p-1-in.12: Driver smp2pgpio requests probe deferral
  261. [ 0.454490] gpiochip_find_base: found new base at 739
  262. [ 0.454556] gpiochip_add: registered GPIOs 739 to 770 on device: master-kernel
  263. [ 0.454622] platform qcom,smp2pgpio-ssr-smp2p-1-out.13: Driver smp2pgpio requests probe deferral
  264. [ 0.454650] gpiochip_find_base: found new base at 739
  265. [ 0.454714] gpiochip_add: registered GPIOs 739 to 770 on device: smp2p
  266. [ 0.455202] gpiochip_find_base: found new base at 707
  267. [ 0.455274] gpiochip_add: registered GPIOs 707 to 738 on device: smp2p
  268. [ 0.455302] gpiochip_find_base: found new base at 675
  269. [ 0.455368] gpiochip_add: registered GPIOs 675 to 706 on device: slave-kernel
  270. [ 0.455435] platform qcom,smp2pgpio-ssr-smp2p-4-in.18: Driver smp2pgpio requests probe deferral
  271. [ 0.455462] gpiochip_find_base: found new base at 675
  272. [ 0.455528] gpiochip_add: registered GPIOs 675 to 706 on device: master-kernel
  273. [ 0.455593] platform qcom,smp2pgpio-ssr-smp2p-4-out.19: Driver smp2pgpio requests probe deferral
  274. [ 0.456395] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
  275. [ 0.456409] mdss_mdp_probe+0x178/0xcc8->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
  276. [ 0.456420] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
  277. [ 0.456445] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
  278. [ 0.456484] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
  279. [ 0.456497] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
  280. [ 0.456505] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
  281. [ 0.456519] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
  282. [ 0.456538] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  283. [ 0.456692] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  284. [ 0.456702] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read
  285. [ 0.456719] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
  286. [ 0.456746] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-ad-off : doesn't exist in device tree
  287. [ 0.457082] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
  288. [ 0.458813] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  289. [ 0.459041] BL: panel=mipi_mot_video_boe_qhd_450, manufacture_id(0xDA)= 0xd2 controller_ver(0xDB)= 0xc controller_drv_ver(0XDC)= 0x1, full=0x0000000000010cd2
  290. [ 0.459085] mdss_dsi_panel_init: Panel Name = mipi_mot_video_boe_qhd_450_v3
  291. [ 0.459416] mdss_dsi_parse_panel_features: ulps feature disabled
  292. [ 0.459430] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  293. [ 0.459439] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  294. [ 0.459454] of_get_named_gpio_flags: can't parse gpios property
  295. [ 0.459460] mdss_dsi_parse_panel_features:1365, Disp_en gpio not specified
  296. [ 0.459509] mdss_dsi_panel_init: Continuous splash enabled
  297. [ 0.459769] of_get_named_gpio_flags: can't parse gpios property
  298. [ 0.459775] dsi_panel_device_register:1901, Disp_en gpio not specified
  299. [ 0.459783] of_get_named_gpio_flags: can't parse gpios property
  300. [ 0.459788] dsi_panel_device_register:1909, TE gpio not specified
  301. [ 0.459796] of_get_named_gpio_flags: can't parse gpios property
  302. [ 0.459801] dsi_panel_device_register: bklt_en gpio not specified
  303. [ 0.460060] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
  304. [ 0.460066] PLL 1 Clock's did not register
  305. [ 0.460088] mdss_dsi_retrieve_ctrl_resources: ctrl_base=e68f8000 ctrl_size=25c phy_base=e68fa500 phy_size=2b0
  306. [ 0.481375] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi
  307. [ 0.481588] mdss_hw_rev_init: MDP Rev=10060000
  308. [ 0.482188] mdss_dsi_status_init: DSI status check interval:8000
  309. [ 0.482541] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.24
  310. [ 0.483452] mdss_fb_register: FrameBuffer[0] 540x960 registered successfully!
  311. [ 0.483490] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
  312. [ 0.483931] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
  313. [ 0.483964] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
  314. [ 0.484024] mdss_mdp_splash_parse_dt: splash mem child node is not present
  315. [ 0.485759] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  316. [ 0.486927] msm_rpm_log_probe: OK
  317. [ 0.487190] msm-jtagv8-mm: probe of 85c000.jtagmm failed with error -1
  318. [ 0.487220] msm-jtagv8-mm: probe of 85d000.jtagmm failed with error -1
  319. [ 0.487249] msm-jtagv8-mm: probe of 85e000.jtagmm failed with error -1
  320. [ 0.487279] msm-jtagv8-mm: probe of 85f000.jtagmm failed with error -1
  321. [ 0.488981] NET: Registered protocol family 27
  322. [ 0.490478] In memshare_probe, Memshare probe success
  323. [ 0.492589] of_get_named_gpio_flags exited with status -517
  324. [ 0.492599] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
  325. [ 0.492652] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
  326. [ 0.493758] of_get_named_gpio_flags exited with status -517
  327. [ 0.493767] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
  328. [ 0.493881] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
  329. [ 0.494758] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'surnia', radio = 4, system_rev = 0x8300, system_serial = 0x770eca0b00000000, machine = 'Qualcomm Technologies, Inc. MSM ', barcode = 'TA364077GG', baseband = '', carrier = 'reteu' pu_reason = 0x00004000
  330. [ 0.495259] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  331. [ 0.495315] AXI: get_pdata(): Error: Client name not found
  332. [ 0.495322] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
  333. [ 0.495329] msm_serial_hsl_probe: Bus scaling is disabled
  334. [ 0.495395] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
  335. [ 0.495702] msm_serial_hsl_init: driver initialized
  336. [ 0.507273] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
  337. [ 0.514650] brd: module loaded
  338. [ 0.517650] loop: module loaded
  339. [ 0.518288] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
  340. [ 0.518314] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  341. [ 0.518322] QSEECOM: qseecom_probe: Device does not support PFE
  342. [ 0.518332] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  343. [ 0.518337] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
  344. [ 0.518699] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
  345. [ 0.522224] AKM compass driver: initialize.
  346. [ 0.522476] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  347. [ 0.522484] i2c-core: driver [tabla-i2c-core] using legacy resume method
  348. [ 0.522574] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  349. [ 0.522580] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  350. [ 0.523130] SCSI Media Changer driver v0.25
  351. [ 0.523660] of_get_named_gpio_flags: can't parse gpios property
  352. [ 0.523667] of_get_named_gpio_flags: can't parse gpios property
  353. [ 0.523673] of_get_named_gpio_flags: can't parse gpios property
  354. [ 0.523679] of_get_named_gpio_flags: can't parse gpios property
  355. [ 0.523685] of_get_named_gpio_flags: can't parse gpios property
  356. [ 0.523690] of_get_named_gpio_flags: can't parse gpios property
  357. [ 0.523696] of_get_named_gpio_flags: can't parse gpios property
  358. [ 0.523723] sps:sps_connect:pipe is NULL.
  359. [ 0.523736] spi_qsd 78b7000.spi: msm_spi_bam_pipe_connect: sps_connect((null):0x (null)):-1
  360. [ 0.523741] sps:sps_connect:pipe is NULL.
  361. [ 0.523750] spi_qsd 78b7000.spi: msm_spi_bam_pipe_connect: sps_connect((null):0x (null)):-1
  362. [ 0.523915] sps: BAM device 0x07884000 is not registered yet.
  363. [ 0.523926] sps:BAM 0x07884000 is registered.
  364. [ 0.527017] sps:BAM 0x07884000 (va:0xe6f40000) enabled: ver:0x18, number of pipes:16
  365. [ 0.529273] input: sensorprocessor as /devices/virtual/input/input0
  366. [ 0.529394] stml0xx spi0.0: stml0xx_reset
  367. [ 0.620987] tun: Universal TUN/TAP device driver, 1.6
  368. [ 0.620996] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  369. [ 0.629964] PPP generic driver version 2.4.2
  370. [ 0.630120] PPP BSD Compression module registered
  371. [ 0.630127] PPP Deflate Compression module registered
  372. [ 0.630142] PPP MPPE Compression module registered
  373. [ 0.630149] NET: Registered protocol family 24
  374. [ 0.630599] wcnss_wlan probed in built-in mode
  375. [ 0.631331] usbcore: registered new interface driver asix
  376. [ 0.631406] usbcore: registered new interface driver ax88179_178a
  377. [ 0.631446] usbcore: registered new interface driver cdc_ether
  378. [ 0.631483] usbcore: registered new interface driver net1080
  379. [ 0.631521] usbcore: registered new interface driver cdc_subset
  380. [ 0.631558] usbcore: registered new interface driver zaurus
  381. [ 0.632153] usbcore: registered new interface driver cdc_ncm
  382. [ 0.632613] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  383. [ 0.632982] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  384. [ 0.633154] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
  385. [ 0.633317] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
  386. [ 0.633418] msm_sharedmem: msm_sharedmem_probe: qcom,client-id property not found
  387. [ 0.633586] msm_sharedmem: msm_sharedmem_probe: Device created for client 'bimc'
  388. [ 0.633732] stml0xx spi0.0: Sensor Hub reports reset
  389. [ 0.634031] msm_otg 78d9000.usb: msm_otg probe
  390. [ 0.634631] of_get_named_gpio_flags: can't parse gpios property
  391. [ 0.636682] msm_otg 78d9000.usb: OTG regs = e69da000
  392. [ 0.638751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  393. [ 0.638760] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  394. [ 0.639071] Unable to get vbus_otg
  395. [ 0.639087] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  396. [ 0.639108] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  397. [ 0.639132] ehci-msm2: Qualcomm EHCI Host Controller
  398. [ 0.639928] usbcore: registered new interface driver cdc_acm
  399. [ 0.639936] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  400. [ 0.639990] usbcore: registered new interface driver ccid_bridge
  401. [ 0.640131] ccid_bridge_init: success
  402. [ 0.640184] usbcore: registered new interface driver usb-storage
  403. [ 0.640298] usbcore: registered new interface driver ums-alauda
  404. [ 0.640333] usbcore: registered new interface driver ums-cypress
  405. [ 0.640368] usbcore: registered new interface driver ums-datafab
  406. [ 0.640398] usbcore: registered new interface driver ums-freecom
  407. [ 0.640428] usbcore: registered new interface driver ums-isd200
  408. [ 0.640458] usbcore: registered new interface driver ums-jumpshot
  409. [ 0.640487] usbcore: registered new interface driver ums-karma
  410. [ 0.640516] usbcore: registered new interface driver ums-onetouch
  411. [ 0.640546] usbcore: registered new interface driver ums-sddr09
  412. [ 0.640576] usbcore: registered new interface driver ums-sddr55
  413. [ 0.640604] usbcore: registered new interface driver ums-usbat
  414. [ 0.640699] usbcore: registered new interface driver usbserial
  415. [ 0.640731] usbcore: registered new interface driver qc_csvt
  416. [ 0.640759] usbserial: USB Serial support registered for qc_csvt
  417. [ 0.640796] usbcore: registered new interface driver usb_ehset_test
  418. [ 0.642910] mousedev: PS/2 mouse device common for all mice
  419. [ 0.643138] usbcore: registered new interface driver xpad
  420. [ 0.643271] input: input_mt_wrapper as /devices/virtual/input/input1
  421. [ 0.643800] synaptics_dsx_of_init: entered of_init function
  422. [ 0.643859] synaptics_dsx_dt_parse_mode: can't find touchstate modes node
  423. [ 0.643865] synaptics_dsx_of_init: failed to load default mode
  424. [ 0.643882] synaptics_dsx_of_init: using gpio config
  425. [ 0.658285] stml0xx spi0.0: Sensor Hub initialization successful
  426. [ 0.660933] stml0xx spi0.0: sensorhub : 000: Boot Complete 10
  427. [ 0.667993] stml0xx spi0.0: Cover status: 0
  428. [ 0.687985] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
  429. [ 0.692536] synaptics_dsx_i2c 2-0020: synaptics_rmi4_cap_button_map: cap_button_map is NULL in board file
  430. [ 0.697774] input: synaptics_dsx_i2c as /devices/soc.0/78b6000.i2c/i2c-2/2-0020/input/input2
  431. [ 0.697909] synaptics_rmi4_query_device: Product: s2316b, firmware id: 175833, config id: 15031101
  432. [ 0.698408] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
  433. [ 0.698457] touchx init
  434. [ 0.698465] Initial touchx state = 0
  435. [ 0.700307] qcom,qpnp-rtc qpnp-rtc-e53e4200: rtc core: registered qpnp_rtc as rtc0
  436. [ 0.700554] i2c /dev entries driver
  437. [ 0.702387] synaptics_rmi4_fwu_init: F34 version 0
  438. [ 0.703214] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
  439. [ 0.708391] msm_flash_init_module:1024 Enter
  440. [ 0.708699] msm_flash_lm3642_init entry
  441. [ 0.709736] g_sctrl[0] e49df000
  442. [ 0.709760] mt9m114_init_module:1155
  443. [ 0.710074] mt9m114_init_module:1160 rc -19
  444. [ 0.710112] ov5645_init_module:557
  445. [ 0.710457] ov7695_init_module:315
  446. [ 0.710731] MT9V113_init_module:699
  447. [ 0.711275] mt9v113_sensor_power_up called
  448. [ 0.804364] msm_cci_ioreg_enable failed to get regulator
  449. [ 0.804403] msm_cci_init: Failed in getting TOP gdscr regulator handle
  450. [ 0.804635] msm_cci_init:829: hw_version = 0x10000008
  451. [ 0.804836] msm_sensor_platform_probe mt9v113 probe succeeded
  452. [ 0.896779] MT9V113_platform_probe: mt9v113 probe succeeded!
  453. [ 0.897168] MSM-CPP cpp_probe:2997 Bus master 0
  454. [ 0.911902] MSM-CPP cpp_init_hardware:952 CPP HW Version: 0x40000000
  455. [ 0.911914] MSM-CPP cpp_init_hardware:973 stream_cnt:0
  456. [ 0.915514] __msm_jpeg_init:1522] Jpeg Device id 0
  457. [ 0.916847] iris_radio: Cannot open the command channel
  458. [ 0.917036] BATT SUPPLY NAME = battery
  459. [ 0.917216] Battsn = SNN5955A
  460. [ 0.917227] max17042 4-0036: Default Serial Number SNN5956
  461. [ 0.917241] max17042 4-0036: Battery Match Found using maxim,ft40-lg-batterydata
  462. [ 0.917264] max17042 4-0036: Config Revision = 3
  463. [ 0.917512] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xa (ok)
  464. [ 0.918027] power_supply max170xx_battery: driver failed to report `present' property: -11
  465. [ 0.918173] thermal thermal_zone0: failed to read out thermal zone 0
  466. [ 0.918389] power_supply max170xx_battery: driver failed to report `present' property: -11
  467. [ 0.918747] Battery Temp State = 1
  468. [ 0.918784] power_supply max170xx_battery: driver failed to report `present' property: -11
  469. [ 0.920643] BMS: bms_get_adc: vadc not found - defer probe rc=-517
  470. [ 0.920651] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
  471. [ 0.920668] spmi qpnp-vm-bms-e53e4a00: Driver qcom,qpnp-vm-bms requests probe deferral
  472. [ 0.921234] CBL: qpnp_cbldet_probe: Probe usb=1
  473. [ 0.921817] unable to find DT imem DLOAD mode node
  474. [ 0.922109] unable to find DT imem EDLOAD mode node
  475. [ 0.923605] qpnp_adc_tm_channel_measure: chip not valid
  476. [ 0.923618] fan5404x-charger 4-006b: tm disable failed: -19
  477. [ 0.924498] fan54046_otg_vreg: no parameters
  478. [ 0.925098] fan5404x_charger_probe: vadc not ready, defer probe
  479. [ 1.013883] ------------[ cut here ]------------
  480. [ 1.013900] WARNING: at ../../../../../../kernel/motorola/msm8916/drivers/regulator/core.c:4144 regulator_unregister+0xb4/0xb8()
  481. [ 1.013907] Modules linked in:
  482. [ 1.013919] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-ga92603c #3
  483. [ 1.013941] [<c010cd0c>] (unwind_backtrace+0x0/0x12c) from [<c010a684>] (show_stack+0x10/0x14)
  484. [ 1.013956] [<c010a684>] (show_stack+0x10/0x14) from [<c011d5b4>] (warn_slowpath_common+0x54/0x6c)
  485. [ 1.013970] [<c011d5b4>] (warn_slowpath_common+0x54/0x6c) from [<c011d798>] (warn_slowpath_null+0x1c/0x24)
  486. [ 1.013984] [<c011d798>] (warn_slowpath_null+0x1c/0x24) from [<c044e6ac>] (regulator_unregister+0xb4/0xb8)
  487. [ 1.013999] [<c044e6ac>] (regulator_unregister+0xb4/0xb8) from [<c0734eb0>] (fan5404x_charger_probe+0x874/0xc1c)
  488. [ 1.014014] [<c0734eb0>] (fan5404x_charger_probe+0x874/0xc1c) from [<c063bab8>] (i2c_device_probe+0xbc/0x11c)
  489. [ 1.014028] [<c063bab8>] (i2c_device_probe+0xbc/0x11c) from [<c04d7168>] (driver_probe_device+0x138/0x39c)
  490. [ 1.014042] [<c04d7168>] (driver_probe_device+0x138/0x39c) from [<c04d749c>] (__driver_attach+0x8c/0x90)
  491. [ 1.014055] [<c04d749c>] (__driver_attach+0x8c/0x90) from [<c04d53a8>] (bus_for_each_dev+0x60/0x94)
  492. [ 1.014068] [<c04d53a8>] (bus_for_each_dev+0x60/0x94) from [<c04d6754>] (bus_add_driver+0x1d4/0x278)
  493. [ 1.014080] [<c04d6754>] (bus_add_driver+0x1d4/0x278) from [<c04d7a9c>] (driver_register+0x78/0x140)
  494. [ 1.014093] [<c04d7a9c>] (driver_register+0x78/0x140) from [<c063a940>] (i2c_register_driver+0x30/0xe8)
  495. [ 1.014105] [<c063a940>] (i2c_register_driver+0x30/0xe8) from [<c0100648>] (do_one_initcall+0xd4/0x17c)
  496. [ 1.014120] [<c0100648>] (do_one_initcall+0xd4/0x17c) from [<c1100c14>] (kernel_init_freeable+0x13c/0x1dc)
  497. [ 1.014134] [<c1100c14>] (kernel_init_freeable+0x13c/0x1dc) from [<c0b12d04>] (kernel_init+0x8/0x14c)
  498. [ 1.014146] [<c0b12d04>] (kernel_init+0x8/0x14c) from [<c0106818>] (ret_from_fork+0x14/0x3c)
  499. [ 1.014188] ---[ end trace 9701d9e188efffa4 ]---
  500. [ 1.100306] i2c 4-006b: Driver fan5404x-charger requests probe deferral
  501. [ 1.118108] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  502. [ 1.118120] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  503.  
  504. [ 1.118131] Bluetooth: HCI UART driver ver 2.2
  505. [ 1.118139] Bluetooth: HCI H4 protocol initialized
  506. [ 1.118348] cpuidle: using governor ladder
  507. [ 1.118357] cpuidle: using governor menu
  508. [ 1.118388] sdhci: Secure Digital Host Controller Interface driver
  509. [ 1.118394] sdhci: Copyright(c) Pierre Ossman
  510. [ 1.118400] sdhci-pltfm: SDHCI platform and OF driver helper
  511. [ 1.118787] of_get_named_gpio_flags: can't parse gpios property
  512. [ 1.122981] mmc0: no vqmmc regulator found
  513. [ 1.122995] mmc0: no vmmc regulator found
  514. [ 1.152159] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
  515. [ 1.161717] mmc1: no vqmmc regulator found
  516. [ 1.161733] mmc1: no vmmc regulator found
  517. [ 1.192610] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
  518. [ 1.192959] qcom,leds-qpnp: probe of leds-qpnp-e53e4c00 failed with error -10
  519. [ 1.193855] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0xd (ok)
  520. [ 1.202501] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
  521. [ 1.202517] qce 720000.qcedev: CE device = 0x0
  522. , IO base, CE = 0xe7440000
  523. , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  524. IO base BAM = 0x (null)
  525. BAM IRQ 239
  526. Engines Availability = 0x2010853
  527. [ 1.202547] sps:BAM 0x00704000 is registered.
  528. [ 1.205995] sps:BAM 0x00704000 (va:0xe7480000) enabled: ver:0x25, number of pipes:8
  529. [ 1.209555] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  530. [ 1.210085] qcedev: FIPS140-2 Known Answer Tests : Skipped
  531. [ 1.211037] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
  532. [ 1.211051] qcrypto 720000.qcrypto: CE device = 0x0
  533. , IO base, CE = 0xe74c0000
  534. , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  535. IO base BAM = 0x (null)
  536. BAM IRQ 239
  537. Engines Availability = 0x2010853
  538. [ 1.217807] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  539. [ 1.217896] mmc0: BKOPS_EN bit = 0
  540. [ 1.218423] qcrypto 720000.qcrypto: qcrypto-ecb-aes
  541. [ 1.218571] qcrypto 720000.qcrypto: qcrypto-cbc-aes
  542. [ 1.218718] qcrypto 720000.qcrypto: qcrypto-ctr-aes
  543. [ 1.218849] qcrypto 720000.qcrypto: qcrypto-ecb-des
  544. [ 1.218994] qcrypto 720000.qcrypto: qcrypto-cbc-des
  545. [ 1.219111] qcrypto 720000.qcrypto: qcrypto-ecb-3des
  546. [ 1.219229] qcrypto 720000.qcrypto: qcrypto-cbc-3des
  547. [ 1.219355] qcrypto 720000.qcrypto: qcrypto-xts-aes
  548. [ 1.219471] qcrypto 720000.qcrypto: qcrypto-sha1
  549. [ 1.219591] qcrypto 720000.qcrypto: qcrypto-sha256
  550. [ 1.219725] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  551. [ 1.219839] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  552. [ 1.219971] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  553. [ 1.220113] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  554. [ 1.220271] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  555. [ 1.220393] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  556. [ 1.220507] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
  557. [ 1.220621] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
  558. [ 1.220727] qcrypto 720000.qcrypto: qcrypto-aes-ccm
  559. [ 1.220840] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
  560. [ 1.220848] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  561. [ 1.221207] hidraw: raw HID events driver (C) Jiri Kosina
  562. [ 1.221668] usbcore: registered new interface driver usbhid
  563. [ 1.221675] usbhid: USB HID core driver
  564. [ 1.222131] zram: Created 1 device(s) ...
  565. [ 1.222657] ashmem: initialized
  566. [ 1.223485] sps:BAM 0x078c4000 is registered.
  567. [ 1.223894] qcom,qpnp-power-on qpnp-power-on-e53c3c00: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
  568. [ 1.223915] qcom,qpnp-power-on qpnp-power-on-e53c3c00: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  569. [ 1.224162] input: qpnp_pon as /devices/virtual/input/input3
  570. [ 1.225455] mmc0: new HS200 MMC card at address 0001
  571. [ 1.225925] mmcblk0: mmc0:0001 QN1SMB 7.28 GiB
  572. [ 1.226073] mmcblk0rpmb: mmc0:0001 QN1SMB partition 3 512 KiB
  573. [ 1.226937] PMIC@SID0: PM8916 v2.0 options: 0, 2, 0, 0
  574. [ 1.228581] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44
  575. [ 1.228826] armbw-pm qcom,armbw-pm.31: BW HWmon governor registered.
  576. [ 1.229713] devfreq qcom,cpubw.30: Couldn't update frequency transition information.
  577. [ 1.230692] coresight-fuse 5e01c.fuse: Fuse initialized
  578. [ 1.231121] coresight-cti: probe of 810000.cti failed with error -1
  579. [ 1.231153] coresight-cti: probe of 811000.cti failed with error -1
  580. [ 1.231200] coresight-cti: probe of 812000.cti failed with error -1
  581. [ 1.231232] coresight-cti: probe of 813000.cti failed with error -1
  582. [ 1.231296] coresight-cti: probe of 814000.cti failed with error -1
  583. [ 1.231325] coresight-cti: probe of 815000.cti failed with error -1
  584. [ 1.231367] coresight-cti: probe of 816000.cti failed with error -1
  585. [ 1.231408] coresight-cti: probe of 817000.cti failed with error -1
  586. [ 1.231443] coresight-cti: probe of 818000.cti failed with error -1
  587. [ 1.231472] coresight-cti: probe of 858000.cti failed with error -1
  588. [ 1.231513] coresight-cti: probe of 859000.cti failed with error -1
  589. [ 1.231555] coresight-cti: probe of 85a000.cti failed with error -1
  590. [ 1.231590] coresight-cti: probe of 85b000.cti failed with error -1
  591. [ 1.231619] coresight-cti: probe of 830000.cti failed with error -1
  592. [ 1.231661] coresight-cti: probe of 835000.cti failed with error -1
  593. [ 1.231702] coresight-cti: probe of 838000.cti failed with error -1
  594. [ 1.231750] coresight-cti: probe of 83c000.cti failed with error -1
  595. [ 1.232073] coresight-csr: probe of 801000.csr failed with error -1
  596. [ 1.232422] coresight-tmc: probe of 826000.tmc failed with error -1
  597. [ 1.232474] coresight-tmc: probe of 825000.tmc failed with error -1
  598. [ 1.232809] coresight-tpiu: probe of 820000.tpiu failed with error -1
  599. [ 1.233122] coresight-funnel: probe of 821000.funnel failed with error -1
  600. [ 1.233159] coresight-funnel: probe of 841000.funnel failed with error -1
  601. [ 1.233209] coresight-funnel: probe of 869000.funnel failed with error -1
  602. [ 1.233258] coresight-funnel: probe of 868000.funnel failed with error -1
  603. [ 1.233564] coresight-replicator: probe of 824000.replicator failed with error -1
  604. [ 1.233897] coresight-stm: probe of 802000.stm failed with error -1
  605. [ 1.234216] coresight-hwevent: probe of 86c000.hwevent failed with error -1
  606. [ 1.234522] coresight-etmv4: probe of 85c000.etm failed with error -1
  607. [ 1.234550] coresight-etmv4: probe of 85d000.etm failed with error -1
  608. [ 1.234577] coresight-etmv4: probe of 85e000.etm failed with error -1
  609. [ 1.234604] coresight-etmv4: probe of 85f000.etm failed with error -1
  610. [ 1.235249] coresight-modem-etm modem_etm0.3: Modem ETM initialized
  611. [ 1.235906] coresight-wcn-etm wcn_etm0.2: Wireless ETM initialized
  612. [ 1.236481] coresight-rpm-etm rpm_etm0.1: RPM ETM initialized
  613. [ 1.237091] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
  614. [ 1.237609] usbcore: registered new interface driver snd-usb-audio
  615. [ 1.238189] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  616. [ 1.238220] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  617. [ 1.248167] msm-pcm-lpa qcom,msm-pcm-lpa.39: msm_pcm_probe: dev name qcom,msm-pcm-lpa.39
  618. [ 1.248861] platform qcom,msm-voip-dsp.41: Driver msm-voip-dsp requests probe deferral
  619. [ 1.249205] platform qcom,msm-pcm-voice.42: Driver msm-pcm-voice requests probe deferral
  620. [ 1.253136] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  621. [ 1.253149] msm8x16-asoc-wcd sound.67: default codec configured
  622. [ 1.253212] of_get_named_gpio_flags: can't parse gpios property
  623. [ 1.254618] msm8x16-asoc-wcd sound.67: ASoC: platform (null) not registered
  624. [ 1.254650] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  625. [ 1.254686] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  626. [ 1.255735] oprofile: using timer interrupt.
  627. [ 1.255818] u32 classifier
  628. [ 1.255825] Actions configured
  629. [ 1.255835] Netfilter messages via NETLINK v0.30.
  630. [ 1.255911] nf_conntrack version 0.5.0 (14032 buckets, 56128 max)
  631. [ 1.256366] ctnetlink v0.93: registering with nfnetlink.
  632. [ 1.256447] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  633. [ 1.256453] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  634. [ 1.256855] xt_time: kernel timezone is -0000
  635. [ 1.257104] ip_tables: (C) 2000-2006 Netfilter Core Team
  636. [ 1.257251] arp_tables: (C) 2002 David S. Miller
  637. [ 1.257288] TCP: cubic registered
  638. [ 1.257295] Initializing XFRM netlink socket
  639. [ 1.257797] NET: Registered protocol family 10
  640. [ 1.258316] mip6: Mobile IPv6
  641. [ 1.258349] ip6_tables: (C) 2000-2006 Netfilter Core Team
  642. [ 1.258485] sit: IPv6 over IPv4 tunneling driver
  643. [ 1.258876] NET: Registered protocol family 17
  644. [ 1.258900] NET: Registered protocol family 15
  645. [ 1.258959] Bridge firewalling registered
  646. [ 1.258972] Ebtables v2.0 registered
  647. [ 1.259123] Bluetooth: RFCOMM TTY layer initialized
  648. [ 1.259146] Bluetooth: RFCOMM socket layer initialized
  649. [ 1.259152] Bluetooth: RFCOMM ver 1.11
  650. [ 1.259159] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  651. [ 1.259165] Bluetooth: BNEP filters: protocol multicast
  652. [ 1.259177] Bluetooth: BNEP socket layer initialized
  653. [ 1.259184] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  654. [ 1.259195] Bluetooth: HIDP socket layer initialized
  655. [ 1.259346] gpiochip_find_base: found new base at 675
  656. [ 1.259421] gpiochip_add: registered GPIOs 675 to 706 on device: slave-kernel
  657. [ 1.259770] gpiochip_find_base: found new base at 643
  658. [ 1.259841] gpiochip_add: registered GPIOs 643 to 674 on device: master-kernel
  659. [ 1.259923] gpiochip_find_base: found new base at 611
  660. [ 1.259991] gpiochip_add: registered GPIOs 611 to 642 on device: slave-kernel
  661. [ 1.260350] gpiochip_find_base: found new base at 579
  662. [ 1.260425] gpiochip_add: registered GPIOs 579 to 610 on device: master-kernel
  663. [ 1.263835] Unable to get vbus_otg
  664. [ 1.263850] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  665. [ 1.263870] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  666. [ 1.265213] BMS: qpnp_vm_bms_probe: VMBMS disabled (disable-bms = 1)
  667. [ 1.266206] qpnp_adc_tm_channel_measure: chip not valid
  668. [ 1.266219] fan5404x-charger 4-006b: tm disable failed: -19
  669. [ 1.267117] fan54046_otg_vreg: no parameters
  670. [ 1.271861] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  671. [ 1.271992] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  672. [ 1.274841] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  673. [ 1.274858] msm8x16-asoc-wcd sound.67: default codec configured
  674. [ 1.274998] of_get_named_gpio_flags: can't parse gpios property
  675. [ 1.275526] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  676. [ 1.275558] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  677. [ 1.275593] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  678. [ 1.276163] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  679. [ 1.276264] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  680. [ 1.276569] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  681. [ 1.276578] msm8x16-asoc-wcd sound.67: default codec configured
  682. [ 1.276638] of_get_named_gpio_flags: can't parse gpios property
  683. [ 1.276928] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  684. [ 1.276955] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  685. [ 1.276981] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  686. [ 1.277271] msm_otg 78d9000.usb: phy_reset: success
  687. [ 1.278394] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 0
  688. [ 1.278425] Registering SWP/SWPB emulation handler
  689. [ 1.333053] Unable to find log_buf by kallsyms!
  690. [ 1.333460] mem_acc_corner: disabling
  691. [ 1.333471] regulator-dummy: disabling
  692. [ 1.333560] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  693. [ 1.333612] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  694. [ 1.334004] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  695. [ 1.334014] msm8x16-asoc-wcd sound.67: default codec configured
  696. [ 1.334081] of_get_named_gpio_flags: can't parse gpios property
  697. [ 1.334389] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  698. [ 1.334419] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  699. [ 1.334453] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  700. [ 1.335787] file system registered
  701. [ 1.335847] mbim_init: initialize 1 instances
  702. [ 1.335979] mbim_init: Initialized 1 ports
  703. [ 1.335987] mbim_bam_setup: no_ports:1
  704. [ 1.336096] mbim_bam_setup: Initialized 1 ports
  705. [ 1.337288] rndis_qc_init: initialize rndis QC instance
  706. [ 1.337723] android_usb gadget: Mass Storage Function, version: 2009/09/11
  707. [ 1.337732] android_usb gadget: Number of LUNs=2
  708. [ 1.337744] lun0: LUN: removable file: (no medium)
  709. [ 1.337751] lun1: LUN: removable file: (no medium)
  710. [ 1.338593] android_usb gadget: android_usb ready
  711. [ 1.338606] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
  712. [ 1.338720] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  713. [ 1.338771] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  714. [ 1.339213] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  715. [ 1.339223] msm8x16-asoc-wcd sound.67: default codec configured
  716. [ 1.339312] of_get_named_gpio_flags: can't parse gpios property
  717. [ 1.339651] gpiod_set_debounce: gpio-1009 status -22
  718. [ 1.339654] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  719. [ 1.339680] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  720. [ 1.339713] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  721. [ 1.339936] input: gpio-keys as /devices/soc.0/gpio_keys.68/input/input4
  722. [ 1.340185] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  723. [ 1.340347] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  724. [ 1.340419] qcom,qpnp-rtc qpnp-rtc-e53e4200: setting system clock to 1970-02-10 13:06:22 UTC (3503182)
  725. [ 1.340754] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  726. [ 1.340764] msm8x16-asoc-wcd sound.67: default codec configured
  727. [ 1.340853] of_get_named_gpio_flags: can't parse gpios property
  728. [ 1.341162] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  729. [ 1.341190] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  730. [ 1.341222] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  731. [ 1.341873] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  732. [ 1.341925] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  733. [ 1.342079] msm_thermal:interrupt_mode_init Interrupt mode init
  734. [ 1.342413] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  735. [ 1.342423] msm8x16-asoc-wcd sound.67: default codec configured
  736. [ 1.342484] of_get_named_gpio_flags: can't parse gpios property
  737. [ 1.342775] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
  738. [ 1.342798] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  739. [ 1.342830] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  740. [ 1.342876] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  741. [ 1.343727] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  742. [ 1.343781] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  743. [ 1.344186] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  744. [ 1.344195] msm8x16-asoc-wcd sound.67: default codec configured
  745. [ 1.344278] of_get_named_gpio_flags: can't parse gpios property
  746. [ 1.344588] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  747. [ 1.344617] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  748. [ 1.344644] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  749. [ 1.346372] qcom,cc-debug-8916 1874000.qcom,cc-debug: Registered Debug Mux successfully
  750. [ 1.346458] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  751. [ 1.346512] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  752. [ 1.346911] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  753. [ 1.346920] msm8x16-asoc-wcd sound.67: default codec configured
  754. [ 1.347004] of_get_named_gpio_flags: can't parse gpios property
  755. [ 1.347296] clock_late_init: Removing enables held for handed-off clocks
  756. [ 1.347305] clock_late_init: clk xo_clk_src
  757. [ 1.347314] clock_late_init: clk xo_a_clk_src
  758. [ 1.347322] clock_late_init: clk xo_otg_clk
  759. [ 1.347329] clock_late_init: clk xo_lpm_clk
  760. [ 1.347336] clock_late_init: clk xo_pil_mss_clk
  761. [ 1.347339] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  762. [ 1.347352] clock_late_init: clk xo_pil_pronto_clk
  763. [ 1.347362] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  764. [ 1.347363] clock_late_init: clk xo_wlan_clk
  765. [ 1.347368] clock_late_init: clk snoc_clk
  766. [ 1.347372] clock_late_init: clk snoc_msmbus_clk
  767. [ 1.347376] clock_late_init: clk snoc_a_clk
  768. [ 1.347380] clock_late_init: clk snoc_msmbus_a_clk
  769. [ 1.347414] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  770. [ 1.347568] clock_late_init: clk pcnoc_clk
  771. [ 1.347577] clock_late_init: clk pcnoc_msmbus_clk
  772. [ 1.347584] clock_late_init: clk pcnoc_a_clk
  773. [ 1.347592] clock_late_init: clk pcnoc_msmbus_a_clk
  774. [ 1.347758] clock_late_init: clk bimc_clk
  775. [ 1.347766] clock_late_init: clk bimc_msmbus_clk
  776. [ 1.347774] clock_late_init: clk bimc_a_clk
  777. [ 1.347781] clock_late_init: clk bimc_msmbus_a_clk
  778. [ 1.347789] clock_late_init: clk bimc_acpu_a_clk
  779. [ 1.347951] clock_late_init: clk pcnoc_keepalive_a_clk
  780. [ 1.347959] clock_late_init: clk pcnoc_usb_a_clk
  781. [ 1.348137] clock_late_init: clk snoc_usb_a_clk
  782. [ 1.348323] clock_late_init: clk bimc_usb_a_clk
  783. [ 1.348333] clock_late_init: clk qdss_clk
  784. [ 1.348508] clock_late_init: clk qdss_a_clk
  785. [ 1.348683] clock_late_init: clk bb_clk1
  786. [ 1.348861] clock_late_init: clk bb_clk2
  787. [ 1.349069] clock_late_init: clk rf_clk2
  788. [ 1.349277] clock_late_init: clk bb_clk1_pin
  789. [ 1.349454] clock_late_init: clk bb_clk2_pin
  790. [ 1.349654] clock_late_init: clk rf_clk2_pin
  791. [ 1.349853] clock_late_init: clk gpll0_clk_src
  792. [ 1.349862] clock_late_init: clk gpll0_ao_clk_src
  793. [ 1.349871] clock_late_init: clk apss_ahb_clk_src
  794. [ 1.349879] clock_late_init: clk crypto_clk_src
  795. [ 1.349886] clock_late_init: clk mdp_clk_src
  796. [ 1.349894] clock_late_init: clk blsp1_qup1_i2c_apps_clk_src
  797. [ 1.349902] clock_late_init: clk blsp1_qup4_i2c_apps_clk_src
  798. [ 1.349909] clock_late_init: clk blsp1_uart1_apps_clk_src
  799. [ 1.349917] clock_late_init: clk esc0_clk_src
  800. [ 1.349925] clock_late_init: clk vsync_clk_src
  801. [ 1.349932] clock_late_init: clk sdcc1_apps_clk_src
  802. [ 1.349940] clock_late_init: clk usb_hs_system_clk_src
  803. [ 1.349948] clock_late_init: clk gcc_blsp1_ahb_clk
  804. [ 1.349955] clock_late_init: clk gcc_blsp1_qup1_i2c_apps_clk
  805. [ 1.349968] clock_late_init: clk gcc_blsp1_qup4_i2c_apps_clk
  806. [ 1.349982] clock_late_init: clk gcc_blsp1_uart1_apps_clk
  807. [ 1.349995] clock_late_init: clk gcc_mdss_ahb_clk
  808. [ 1.350002] clock_late_init: clk gcc_mdss_axi_clk
  809. [ 1.350010] clock_late_init: clk gcc_mdss_esc0_clk
  810. [ 1.350017] clock_late_init: clk gcc_mdss_mdp_clk
  811. [ 1.350024] clock_late_init: clk gcc_mdss_vsync_clk
  812. [ 1.350037] clock_late_init: clk gcc_sdcc1_ahb_clk
  813. [ 1.350047] clock_late_init: clk gcc_sdcc1_apps_clk
  814. [ 1.350060] clock_late_init: clk gcc_usb_hs_ahb_clk
  815. [ 1.350068] clock_late_init: clk gcc_usb_hs_system_clk
  816. [ 1.350075] clock_late_init: clk gcc_crypto_clk
  817. [ 1.350087] clock_late_init: clk gcc_crypto_ahb_clk
  818. [ 1.350097] clock_late_init: clk gcc_crypto_axi_clk
  819. [ 1.350106] clock_late_init: clk a7ssmux
  820. [ 1.350114] clock_late_init: clk dsi_vco_clk_8916
  821. [ 1.350121] clock_late_init: clk byte0_clk_src
  822. [ 1.350129] clock_late_init: clk pclk0_clk_src
  823. [ 1.350136] clock_late_init: clk gcc_mdss_pclk0_clk
  824. [ 1.350144] clock_late_init: clk gcc_mdss_byte0_clk
  825. [ 1.350164] ALSA device list:
  826. [ 1.350170] No soundcards found.
  827. [ 1.351090] Warning: unable to open an initial console.
  828. [ 1.351146] Freeing unused kernel memory: 64K (c1200000 - c1210000)
  829. [ 1.360827] busybox (192) used greatest stack depth: 6312 bytes left
  830. [ 1.370968] mkdir (199) used greatest stack depth: 6044 bytes left
  831. [ 1.497501] mmc1: new ultra high speed SDR50 SDHC card at address 59b4
  832. [ 1.498271] mmcblk1: mmc1:59b4 USD00 14.9 GiB
  833. [ 1.504419] mmcblk1: p1
  834. [ 1.505825] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  835. [ 1.505886] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  836. [ 1.506308] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  837. [ 1.506321] msm8x16-asoc-wcd sound.67: default codec configured
  838. [ 1.506404] of_get_named_gpio_flags: can't parse gpios property
  839. [ 1.506727] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  840. [ 1.506761] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  841. [ 1.506798] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  842. [ 1.510314] msm_otg 78d9000.usb: chg_type = USB_SDP_CHARGER
  843. [ 1.512507] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  844. [ 1.512528] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  845. [ 1.610018] mdev (202) used greatest stack depth: 5768 bytes left
  846. [ 3.889365] stml0xx spi0.0: Cover status: 1
  847. [ 3.901636] cut (319) used greatest stack depth: 5696 bytes left
  848. [ 4.274096] enable_store: android_usb: already disabled
  849. [ 4.274475] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  850. [ 4.281351] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
  851. [ 4.281428] android_usb gadget: using random self ethernet address
  852. [ 4.281458] android_usb gadget: using random host ethernet address
  853. [ 4.281944] rndis0: MAC 62:08:b0:16:f4:e9
  854. [ 4.281953] rndis0: HOST MAC fa:09:da:b9:03:2a
  855. [ 4.282034] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  856. [ 4.286691] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  857. [ 4.286871] ifconfig (468) used greatest stack depth: 5676 bytes left
  858. [ 4.360961] busybox-static (470) used greatest stack depth: 5612 bytes left
  859. [ 4.454371] msm_otg 78d9000.usb: Avail curr from USB = 100
  860. [ 4.454743] android_work: android_work: did not send uevent (0 0 (null))
  861. [ 4.572862] android_work: android_work: sent uevent USB_STATE=CONNECTED
  862. [ 4.576461] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  863. [ 4.712877] android_work: android_work: sent uevent USB_STATE=CONNECTED
  864. [ 4.714106] android_usb gadget: high-speed config #1: 86000c8.android_usb
  865. [ 4.714514] msm_otg 78d9000.usb: Avail curr from USB = 500
  866. [ 4.714575] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  867. [ 4.715377] fan5404x-charger 4-006b: Set IBUSLIM: 500 mA
  868. [ 4.770259] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  869. [ 5.827999] pstore: Found record type 2, psi name ramoops
  870. [ 5.828016] persistent_ram_annotation_merge: merged 63
  871. [ 5.828032] pstore: Found record type 4, psi name ramoops
  872. [ 5.832893] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  873. [ 5.834034] systemd[1]: Set hostname to <Sailfish>.
  874. [ 5.842747] systemd-fstab-g (498) used greatest stack depth: 5232 bytes left
  875. [ 6.083861] systemd-gpt-auto-generator[503]: Failed to verify GPT partition /dev/mmcblk0rpmb: No such device
  876. [ 6.084483] systemd[1]: /lib/systemd/system-generators/systemd-gpt-auto-generator exited with exit status 1.
  877. [ 6.110997] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  878. [ 6.114942] systemd[1]: [/lib/systemd/system/connman.service:3] Failed to add dependency on oneshot-root, ignoring: Invalid argument
  879. [ 6.114995] systemd[1]: [/lib/systemd/system/connman.service:4] Failed to add dependency on oneshot-root, ignoring: Invalid argument
  880. [ 6.133755] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  881. [ 6.163438] systemd[1]: [/lib/systemd/system/none.mount:7] Not an absolute path, ignoring: none
  882. [ 6.166851] systemd[1]: Cannot create mount unit for API file system /sys/fs/cgroup/bfqio. Refusing.
  883. [ 6.168695] systemd[1]: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  884. [ 6.171837] systemd[1]: Cannot add dependency job for unit sys-fs-pstore.mount, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
  885. [ 6.171892] systemd[1]: Cannot add dependency job for unit sys-fs-cgroup-bfqio.mount, ignoring: Unit sys-fs-cgroup-bfqio.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-cgroup-bfqio.mount' for details.
  886. [ 6.173222] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  887. [ 6.173423] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  888. [ 6.173473] systemd[1]: Starting Login Prompts.
  889. [ 6.173522] systemd[1]: Reached target Login Prompts.
  890. [ 6.173561] systemd[1]: Starting Delayed Shutdown Socket.
  891. [ 6.173675] systemd[1]: Listening on Delayed Shutdown Socket.
  892. [ 6.173707] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  893. [ 6.173786] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  894. [ 6.173830] systemd[1]: Starting Journal Socket.
  895. [ 6.174025] systemd[1]: Listening on Journal Socket.
  896. [ 6.174103] systemd[1]: Mounted POSIX Message Queue File System.
  897. [ 6.174133] systemd[1]: Starting Journal Service...
  898. [ 6.175968] systemd[1]: Started Journal Service.
  899. [ 6.189069] systemd-journald[505]: Vacuuming done, freed 0 bytes
  900. [ 6.477909] systemd-udevd[534]: starting version 208
  901. [ 7.362184] EXT4-fs (mmcblk0p1): barriers disabled
  902. [ 7.371561] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: barrier=0
  903. [ 7.532517] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts: barrier=0
  904. [ 7.622308] EXT4-fs (mmcblk0p31): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  905. [ 7.815572] EXT4-fs (mmcblk0p42): mounted filesystem with ordered data mode. Opts: barrier=1
  906. [ 36.421146] wlan: module is from the staging directory, the quality is unknown, you have been warned.
  907. [ 36.436089] wlan: loading driver v3.8.20.23
  908. [ 36.518762] systemd-journald[505]: Received request to flush runtime journal from PID 1
  909. [ 36.535673] init: could not import file '/init.superuser.rc' from '/init.cm.rc'
  910. [ 36.614994] init: /dev/hw_random not found
  911. [ 36.615046] keychord: using input dev sensorprocessor for fevent
  912. [ 36.615058] keychord: using input dev qpnp_pon for fevent
  913. [ 36.615068] keychord: using input dev gpio-keys for fevent
  914. [ 36.615282] init: loglevel: invalid log level'64'
  915. [ 36.629034] init: /dev/hw_random not found
  916. [ 36.640448] fs_mgr: Cannot open file fstab.qcom
  917. [ 36.641926] init: fs_mgr_mount_all returned an error
  918. [ 36.642195] init: fs_mgr_mount_all returned unexpected error 255
  919. [ 36.650771] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x86800000 to 0x8bd00000
  920. [ 36.677625] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xa5c00000 to 0xa5d00000
  921. [ 36.731882] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
  922. [ 36.870759] rndis_function_bind_config: rndis_function_bind_config MAC: FA:09:DA:B9:03:2A
  923. [ 36.870823] android_usb gadget: using random self ethernet address
  924. [ 36.870857] android_usb gadget: using random host ethernet address
  925. [ 36.871461] rndis0: MAC ea:be:93:0e:d2:cd
  926. [ 36.871472] rndis0: HOST MAC 3e:54:39:4c:e1:4c
  927. [ 36.871534] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  928. [ 36.874599] msm_otg 78d9000.usb: Avail curr from USB = 2
  929. [ 36.874625] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
  930. [ 36.874652] android_work: android_work: did not send uevent (1 1 (null))
  931. [ 36.889234] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  932. [ 36.913547] bd65b60 1-0064: Enabling CABC
  933. [ 37.029635] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
  934. [ 37.029667] msm_otg 78d9000.usb: Avail curr from USB = 100
  935. [ 37.029764] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  936. [ 37.148208] android_work: android_work: sent uevent USB_STATE=CONNECTED
  937. [ 37.151827] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  938. [ 37.288199] android_work: android_work: sent uevent USB_STATE=CONNECTED
  939. [ 37.288880] android_usb gadget: high-speed config #1: 86000c8.android_usb
  940. [ 37.289296] msm_otg 78d9000.usb: Avail curr from USB = 500
  941. [ 37.289384] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  942. [ 37.290981] fan5404x-charger 4-006b: Set IBUSLIM: 500 mA
  943. [ 37.340323] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  944. [ 37.584153] systemd-journald[505]: Received request to flush runtime journal from PID 1
  945. [ 38.086066] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
  946. [ 38.192025] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
  947. [ 38.192050] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
  948. [ 38.192132] memshare: Modem Restart has happened
  949. [ 38.192426] spmi msm8x16_wcd_codec-e53e5600: Driver wcd-spmi-core requests probe deferral
  950. [ 38.192580] spmi msm8x16_wcd_codec-e53e5800: Driver wcd-spmi-core requests probe deferral
  951. [ 38.193125] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  952. [ 38.193136] msm8x16-asoc-wcd sound.67: default codec configured
  953. [ 38.193215] of_get_named_gpio_flags: can't parse gpios property
  954. [ 38.193530] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
  955. [ 38.193560] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
  956. [ 38.193592] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
  957. [ 38.193762] M-Notify: General: 7
  958. [ 38.239967] fs_mgr: Cannot open file fstab.qcom
  959. [ 38.243664] fs_mgr: Cannot open file fstab.qcom
  960. [ 38.259412] init: Detected MSM SOC ID=206 SOC VER=65536 BOARD TYPE=MTP
  961. [ 38.259691] init: Found radio id: 0x4 setting build properties for surnia_umts device
  962. [ 38.259965] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
  963. [ 38.288934] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  964. [ 38.379421] synaptics_dsx_sensor_state: state change STANDBY -> ACTIVE
  965. [ 38.417134] init: service 'console' requires console
  966. [ 38.437076] wcnss_wlan triggered by userspace
  967. [ 38.437278] wcnss_pm_qos_add_request: add request
  968. [ 38.437294] wcnss_pm_qos_update_request: update request 100
  969. [ 38.437676] wcnss_notif_cb: wcnss notification event: 2
  970. [ 38.442550] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x8bd00000 to 0x8c2e0000
  971. [ 38.442867] wcnss_notif_cb: wcnss notification event: 6
  972. [ 38.445852] wcnss: IRIS Reg: 51120004
  973. [ 38.446795] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
  974. [ 38.464910] logd.auditd: start
  975. [ 38.481037] smd_pkt_open: DATA5_CNTL open failed -19
  976. [ 38.507693] msm_thermal:set_enabled enabled = 0
  977. [ 38.743334] msm8x16-asoc-wcd sound.67: property qcom,tfa9890-left-name not detected in node /soc/sound
  978. [ 38.743351] msm8x16-asoc-wcd sound.67: default codec configured
  979. [ 38.743447] of_get_named_gpio_flags: can't parse gpios property
  980. [ 38.744596] wcd-spmi-core msm8x16_wcd_codec-e53e5600: Error: regulator not found
  981. [ 38.766310] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
  982. [ 38.766329] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
  983. [ 38.772621] apr_tal:Modem Is Up
  984. [ 38.789449] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: mux SLIM_0_RX AANC MUX has no paths
  985. [ 38.791566] wcd-spmi-core msm8x16_wcd_codec-e53e5600: ASoC: mux RX3 MIX1 INP3 has no paths
  986. [ 38.791668] wcd-spmi-core msm8x16_wcd_codec-e53e5600: ASoC: mux RX2 MIX1 INP3 has no paths
  987. [ 38.801443] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  988. [ 38.802367] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  989. [ 38.803013] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  990. [ 38.803662] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> VoIP mapping ok
  991. [ 38.804054] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  992. [ 38.804381] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> PRI_MI2S_RX_HOSTLESS mapping ok
  993. [ 38.804692] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  994. [ 38.804944] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-afe-proxy-rx.14 mapping ok
  995. [ 38.805221] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-afe-proxy-tx.14 mapping ok
  996. [ 38.805663] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  997. [ 38.805976] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  998. [ 38.806209] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> TERT_MI2S_TX_HOSTLESS mapping ok
  999. [ 38.806593] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  1000. [ 38.806891] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> Voice2 mapping ok
  1001. [ 38.807315] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
  1002. [ 38.807752] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> VoLTE mapping ok
  1003. [ 38.808056] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> VoWLAN mapping ok
  1004. [ 38.808344] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
  1005. [ 38.808688] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  1006. [ 38.808953] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM1 mapping ok
  1007. [ 38.809254] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM2 mapping ok
  1008. [ 38.809498] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM3 mapping ok
  1009. [ 38.809786] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM4 mapping ok
  1010. [ 38.810134] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM5 mapping ok
  1011. [ 38.810891] compress asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
  1012. [ 38.811577] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> QUAT_MI2S_RX_HOSTLESS mapping ok
  1013. [ 38.812509] msm8x16-asoc-wcd sound.67: msm8x16_wcd_i2s_rx1 <-> qcom,msm-dai-q6-mi2s-prim.147 mapping ok
  1014. [ 38.813098] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-mi2s-sec.148 mapping ok
  1015. [ 38.813612] msm8x16-asoc-wcd sound.67: msm8x16_wcd_i2s_tx1 <-> qcom,msm-dai-q6-mi2s-tert.150 mapping ok
  1016. [ 38.814219] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-bt-sco-rx.135 mapping ok
  1017. [ 38.814793] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-bt-sco-tx.136 mapping ok
  1018. [ 38.817549] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset
  1019. [ 38.820293] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-int-fm-rx.137 mapping ok
  1020. [ 38.820739] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-int-fm-tx.138 mapping ok
  1021. [ 38.821090] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-be-afe-pcm-rx.1 mapping ok
  1022. [ 38.821373] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-be-afe-pcm-tx.1 mapping ok
  1023. [ 38.821686] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-t mapping ok
  1024. [ 38.822065] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-r mapping ok
  1025. [ 38.822433] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-rx mapping ok
  1026. [ 38.822758] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-2- mapping ok
  1027. [ 38.835363] input: msm8x16-snd-card Headset Jack as /devices/soc.0/sound.67/sound/card0/input5
  1028. [ 38.982086] smd_pkt_open: DATA5_CNTL open failed -19
  1029. [ 39.143552] subsys-pil-tz a21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
  1030. [ 39.143810] wcnss_notif_cb: wcnss notification event: 7
  1031. [ 39.163390] subsys-pil-tz a21b000.qcom,pronto: Subsystem error monitoring/handling services are up
  1032. [ 39.163592] wcnss_notif_cb: wcnss notification event: 3
  1033. [ 39.163611] wcnss_pm_qos_update_request: update request -1
  1034. [ 39.163623] wcnss_pm_qos_remove_request: remove request
  1035. [ 39.258021] sps:BAM 0x04044000 is registered.
  1036. [ 39.258770] sps:BAM 0x04044000 (va:0xea520000) enabled: ver:0x25, number of pipes:6
  1037. [ 39.291308] wcnss: version 01050102
  1038. [ 39.291337] wcnss: schedule dnld work for pronto
  1039. [ 39.291532] wcnss: build version CNSS-PR-2-0-1-1-c1-00049
  1040. [ 39.291617] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  1041. [ 39.955303] diag: In diag_process_smd_read_data, diag_device_write error: -19
  1042. [ 41.480269] wlan: [1268:F :HDD] hdd_driver_init: WCNSS driver not ready
  1043. [ 41.840304] wcnss: NV download
  1044. [ 41.855918] wcnss: NV bin size: 29812, total_fragments: 10
  1045. [ 41.855975] wcnss: no space available for smd frame
  1046. [ 41.864299] hcismd_set_enable 0
  1047. [ 41.864339] Bluetooth: Cannot open the command channel
  1048. [ 41.874845] stml0xx spi0.0: STML0XX version 29
  1049. [ 41.880345] wcnss: no space available for smd frame
  1050. [ 41.898265] stml0xx spi0.0: STML0XX version 29
  1051. [ 41.910869] wcnss: no space available for smd frame
  1052. [ 41.940341] wcnss: no space available for smd frame
  1053. [ 42.049279] msm_camera_fill_vreg_params:54 i 2 j 0 cam_vdig
  1054. [ 42.049297] msm_camera_fill_vreg_params:87 i 5 j 1 cam_vaf
  1055. [ 42.049308] msm_camera_fill_vreg_params:54 i 4 j 0 cam_vdig
  1056. [ 42.049315] msm_camera_fill_vreg_params:87 i 5 j 1 cam_vaf
  1057. [ 42.105886] msm_cci_ioreg_enable failed to get regulator
  1058. [ 42.105950] msm_cci_init: Failed in getting TOP gdscr regulator handle
  1059. [ 42.106386] msm_cci_init:829: hw_version = 0x10000008
  1060. [ 42.106685] s5k5e2 probe succeeded
  1061. [ 42.156737] MT9V113_sensor_config:1135 mt9v113 cfgtype = 8
  1062. [ 42.156757] MT9V113_sensor_config:1153 sensor name mt9v113
  1063. [ 42.156765] MT9V113_sensor_config:1155 session id 1
  1064. [ 42.156772] MT9V113_sensor_config:1159 subdev_id[0] -1
  1065. [ 42.156779] MT9V113_sensor_config:1159 subdev_id[1] -1
  1066. [ 42.156785] MT9V113_sensor_config:1159 subdev_id[2] -1
  1067. [ 42.156792] MT9V113_sensor_config:1159 subdev_id[3] -1
  1068. [ 42.156799] MT9V113_sensor_config:1159 subdev_id[4] -1
  1069. [ 42.156805] MT9V113_sensor_config:1159 subdev_id[5] -1
  1070. [ 42.156812] MT9V113_sensor_config:1159 subdev_id[6] 1
  1071. [ 42.156818] MT9V113_sensor_config:1159 subdev_id[7] -1
  1072. [ 42.156825] MT9V113_sensor_config:1159 subdev_id[8] 1
  1073. [ 42.156832] MT9V113_sensor_config:1159 subdev_id[9] -1
  1074. [ 42.156839] MT9V113_sensor_config:1159 subdev_id[10] -1
  1075. [ 42.156845] MT9V113_sensor_config:1163 mount angle valid 1 value 270
  1076. [ 42.158014] msm_cci_release invalid ref count 0 / cci state 1
  1077. [ 42.158030] msm_sensor_cci_i2c_util line 512 rc = -22
  1078. [ 42.158041] msm_actuator_close:1437 cci_init failed
  1079. [ 42.159277] init.mmi.touch.sh: Error: No matching firmware file found
  1080. [ 42.162446] msm_csid_init: CSID_VERSION = 0x30010000
  1081. [ 42.162858] msm_csid_init: Failed in getting TOP gdscr regulator handle
  1082. [ 42.168428] msm_csid_init: CSID_VERSION = 0x30010000
  1083. [ 42.168975] msm_csid_init: Failed in getting TOP gdscr regulator handle
  1084. [ 42.199911] msm_vfe40_init_qos_parms: NO D/S entries found
  1085. [ 42.199930] msm_vfe40_init_vbif_parms: NO VBIF entries found
  1086. [ 42.242046] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  1087. [ 42.242385] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  1088. [ 42.242498] MSM-CPP cpp_init_hardware:952 CPP HW Version: 0x40000000
  1089. [ 42.242512] MSM-CPP cpp_init_hardware:973 stream_cnt:0
  1090. [ 42.243100] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  1091. [ 42.243535] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  1092. [ 42.243928] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  1093. [ 42.244812] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  1094. [ 42.245241] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  1095. [ 42.245634] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  1096. [ 42.274202] MSM-CPP cpp_load_fw:1110 MC Bootloader Version: 0x312e3176
  1097. [ 42.280276] MSM-CPP cpp_load_fw:1123 CPP FW Version: 0x10040005
  1098. [ 42.583697] msm_thermal:store_cc_enabled Core control disabled
  1099. [ 42.584016] msm_thermal:store_cc_enabled Core control enabled
  1100. [ 42.873056] hcismd_set_enable 1
  1101. [ 42.873199] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_ACL
  1102. [ 42.873223] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_CMD
  1103. [ 42.873725] Bluetooth: HCI device registration is starting
  1104. [ 43.714385] mdss_dsi_on+: ctrl=e53fe010 ndx=0
  1105. [ 43.714411] mdss_dsi_on-:
  1106. [ 43.876874] hcismd_set_enable 1
  1107. [ 43.877098] hcismd_set_enable 1
  1108. [ 43.877114] Bluetooth: HCI device un-registration going on
  1109. [ 43.945958] Bluetooth: Frame for unknown HCI device (hdev=NULL)
  1110. [ 43.945973] Bluetooth: Frame for unknown HCI device (hdev=NULL)
  1111. [ 44.238609] hcismd_set_enable 0
  1112. [ 44.238741] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_ACL
  1113. [ 44.238772] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_CMD
  1114. [ 44.238945] Bluetooth: HCI device registration is starting
  1115. [ 44.972356] wcnss: received WCNSS_CBC_COMPLETE_IND from FW
  1116. [ 46.904311] surfaceflinger (1600) used greatest stack depth: 4784 bytes left
  1117. [ 46.911274] binder: undelivered death notification, 00000000b5c791c0
  1118. [ 50.784377] stml0xx spi0.0: stml0xx_reset
  1119. [ 50.883038] stml0xx spi0.0: sensorhub : 000: Boot Complete 10
  1120. [ 50.884410] stml0xx spi0.0: Sensor Hub reports reset
  1121. [ 50.906042] stml0xx spi0.0: Sensor Hub initialization successful
  1122. [ 51.383186] stml0xx spi0.0: STML0XX version 1b
  1123. [ 82.052552] QSGRenderThread (2071) used greatest stack depth: 4720 bytes left
  1124. [ 82.367122] Core dump to |/system/bin/coredump jolla-startupwi 1796 1503224188 pipe failed
  1125. [ 84.454029] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  1126. [ 84.455225] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x1
  1127. [ 84.455331] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  1128. [ 84.455372] APR: Wrong parameters
  1129. [ 84.455383] adm_get_params: Failed to Get Params on port_id 0x0 -22
  1130. [ 84.455390] msm_dolby_dap_param_visualizer_control_get: get parameters failed
  1131. [ 84.455610] msm_pcm_volume_ctl_get substream runtime not found
  1132. [ 84.455687] msm_pcm_volume_ctl_get substream runtime not found
  1133. [ 84.455952] msm_pcm_volume_ctl_get substream runtime not found
  1134. [ 84.456084] msm_pcm_volume_ctl_get substream runtime not found
  1135. [ 84.456215] msm_pcm_volume_ctl_get substream runtime not found
  1136. [ 84.547136] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1137. [ 84.547167] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1138. [ 84.552613] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1139. [ 84.552670] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1140. [ 84.557881] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1141. [ 84.557913] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1142. [ 84.563036] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1143. [ 84.563093] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1144. [ 84.593812] adm_callback: cmd = 0x10335 returned error = 0x2
  1145. [ 84.823980] Core dump to |/system/bin/coredump pulseaudio 2284 1503224191 pipe failed
  1146. [ 84.827262] destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
  1147. [ 84.827305] destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
  1148. [ 84.827332] destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
  1149. [ 84.827357] destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
  1150. [ 86.028508] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  1151. [ 86.029565] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x1
  1152. [ 86.029638] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  1153. [ 86.029884] adm_callback: cmd = 0x1032a returned error = 0x2
  1154. [ 86.029892] adm_callback: ADM get param error = 2, resuming
  1155. [ 87.020319] adm_get_params: get params timed out port_id = 0x0
  1156. [ 87.020336] msm_dolby_dap_param_visualizer_control_get: get parameters failed
  1157. [ 87.020686] msm_pcm_volume_ctl_get substream runtime not found
  1158. [ 87.020760] msm_pcm_volume_ctl_get substream runtime not found
  1159. [ 87.020919] msm_pcm_volume_ctl_get substream runtime not found
  1160. [ 87.020981] msm_pcm_volume_ctl_get substream runtime not found
  1161. [ 87.021063] msm_pcm_volume_ctl_get substream runtime not found
  1162. [ 87.054757] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1163. [ 87.054793] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1164. [ 87.064107] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1165. [ 87.064147] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1166. [ 87.071175] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1167. [ 87.071222] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1168. [ 87.077125] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1169. [ 87.077169] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1170. [ 87.105983] adm_callback: cmd = 0x10335 returned error = 0x2
  1171. [ 87.285228] Core dump to |/system/bin/coredump pulseaudio 2334 1503224193 pipe failed
  1172. [ 87.292645] destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
  1173. [ 87.292685] destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
  1174. [ 87.292712] destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
  1175. [ 87.292736] destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
  1176. [ 88.470436] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  1177. [ 88.471736] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x1
  1178. [ 88.471894] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  1179. [ 88.472127] adm_callback: cmd = 0x1032a returned error = 0x2
  1180. [ 88.472137] adm_callback: ADM get param error = 2, resuming
  1181. [ 89.470283] adm_get_params: get params timed out port_id = 0x0
  1182. [ 89.470301] msm_dolby_dap_param_visualizer_control_get: get parameters failed
  1183. [ 89.470627] msm_pcm_volume_ctl_get substream runtime not found
  1184. [ 89.470701] msm_pcm_volume_ctl_get substream runtime not found
  1185. [ 89.470859] msm_pcm_volume_ctl_get substream runtime not found
  1186. [ 89.470923] msm_pcm_volume_ctl_get substream runtime not found
  1187. [ 89.471006] msm_pcm_volume_ctl_get substream runtime not found
  1188. [ 89.502455] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1189. [ 89.502486] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1190. [ 89.507056] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1191. [ 89.507085] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1192. [ 89.511621] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1193. [ 89.511652] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1194. [ 89.516178] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1195. [ 89.516207] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1196. [ 89.541485] adm_callback: cmd = 0x10335 returned error = 0x2
  1197. [ 89.720928] Core dump to |/system/bin/coredump pulseaudio 2378 1503224196 pipe failed
  1198. [ 89.728898] destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
  1199. [ 89.728944] destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
  1200. [ 89.728972] destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
  1201. [ 89.728999] destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
  1202. [ 90.898575] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  1203. [ 90.899658] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x1
  1204. [ 90.899749] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  1205. [ 90.900066] adm_callback: cmd = 0x1032a returned error = 0x2
  1206. [ 90.900077] adm_callback: ADM get param error = 2, resuming
  1207. [ 91.890297] adm_get_params: get params timed out port_id = 0x0
  1208. [ 91.890315] msm_dolby_dap_param_visualizer_control_get: get parameters failed
  1209. [ 91.890650] msm_pcm_volume_ctl_get substream runtime not found
  1210. [ 91.890769] msm_pcm_volume_ctl_get substream runtime not found
  1211. [ 91.890968] msm_pcm_volume_ctl_get substream runtime not found
  1212. [ 91.891049] msm_pcm_volume_ctl_get substream runtime not found
  1213. [ 91.891160] msm_pcm_volume_ctl_get substream runtime not found
  1214. [ 91.930597] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1215. [ 91.930633] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1216. [ 91.936419] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1217. [ 91.936457] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1218. [ 91.943066] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1219. [ 91.943109] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1220. [ 91.947871] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1221. [ 91.947924] __q6asm_cmd: DSP returned error[-5] opcode 68557
  1222. [ 91.973118] adm_callback: cmd = 0x10335 returned error = 0x2
  1223. [ 92.179991] Core dump to |/system/bin/coredump pulseaudio 2402 1503224198 pipe failed
  1224. [ 92.274640] destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
  1225. [ 92.274739] destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
  1226. [ 92.274786] destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
  1227. [ 92.274830] destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
  1228. [ 96.636679] elevator: type fiops not found
  1229. [ 96.636694] elevator: switch to fiops failed
  1230. [ 96.637228] msm_thermal:store_cc_enabled Core control disabled
  1231. [ 96.637519] msm_thermal:store_cc_enabled Core control enabled
  1232. [ 96.641895] msm_thermal:store_cc_enabled Core control disabled
  1233. [ 96.642342] msm_thermal:store_cc_enabled Core control enabled
  1234. [ 96.960887] Core dump to |/system/bin/coredump QDBusConnection 2766 1503224203 pipe failed
  1235. [ 97.268263] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  1236. [ 103.620191] msm_otg 78d9000.usb: Avail curr from USB = 2
  1237. [ 103.620272] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
  1238. [ 103.623708] msm_otg 78d9000.usb: Avail curr from USB = 0
  1239. [ 103.624654] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_DISCONNECT_EVENT received
  1240. [ 103.626499] android_work: android_work: sent uevent USB_STATE=SUSPENDED
  1241. [ 103.628328] fan5404x-charger 4-006b: Set IBUSLIM: 500 mA
  1242. [ 103.634808] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1243. [ 103.649639] get_bam_type_from_core_name: invalid BAM name()
  1244. [ 103.649685] usb_bam_get_connection_idx: Invalid bam, type=-22, name=
  1245. [ 103.649697] msm_bam_device_lpm_ok: Going to LPM now
  1246. [ 103.653970] msm_otg 78d9000.usb: USB in low power mode
  1247. [ 104.987284] msm_otg 78d9000.usb: USB exited from low power mode
  1248. [ 104.838627] functions_store: android_usb: Cannot enable 'none' (-22)
  1249. [ 105.000194] rndis_function_bind_config: rndis_function_bind_config MAC: FA:09:DA:B9:03:2A
  1250. [ 105.000791] android_usb gadget: using random self ethernet address
  1251. [ 105.000899] android_usb gadget: using random host ethernet address
  1252. [ 105.007921] rndis0: MAC ca:96:ca:93:f1:30
  1253. [ 105.007942] rndis0: HOST MAC ba:55:30:62:d4:e4
  1254. [ 105.008277] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1255. [ 105.061882] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1256. [ 105.110743] msm_otg 78d9000.usb: chg_type = USB_SDP_CHARGER
  1257. [ 105.115300] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  1258. [ 105.115324] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  1259. [ 105.259031] msm_otg 78d9000.usb: Avail curr from USB = 100
  1260. [ 105.262234] android_work: android_work: did not send uevent (0 0 (null))
  1261. [ 105.381663] android_work: android_work: did not send uevent (0 0 (null))
  1262. [ 105.518254] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1263. [ 105.519007] android_usb gadget: high-speed config #1: 86000c8.android_usb
  1264. [ 105.519504] msm_otg 78d9000.usb: Avail curr from USB = 500
  1265. [ 105.520912] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  1266. [ 105.528568] fan5404x-charger 4-006b: Set IBUSLIM: 500 mA
  1267. [ 105.580346] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1268. [ 126.190946] systemd-readahead[506]: open(/var/lib/timed/localtime) failed: Too many levels of symbolic links
  1269. [ 127.596465] bd65b60 1-0064: backlight off
  1270. [ 127.606252] synaptics_dsx_sensor_state: state change ACTIVE -> SUSPEND
  1271. [ 127.650804] mdss_dsi_panel_off+: ctrl=e53fe010 ndx=0
  1272. [ 127.650807] mdss_dsi_panel_set_hbm: HBM is disabled, ignore request
  1273. [ 127.781958] mdss_dsi_panel_off-:
  1274. [ 127.781966] mdss_dsi_off+: ctrl=e53fe010 ndx=0
  1275. [ 127.783324] mdss_dsi_off-:
  1276. [ 131.814159] Report pwrkey press event at: 2017-08-20 10:17:18 UTC
  1277. [ 131.957827] Report pwrkey release event at: 2017-08-20 10:17:18 UTC
  1278. [ 131.970395] mdss_dsi_on+: ctrl=e53fe010 ndx=0
  1279. [ 132.022916] mdss_dsi_on-:
  1280. [ 132.022933] mdss_dsi_panel_on+: ctrl=e53fe010 ndx=0
  1281. [ 132.188039] mdss_dsi_panel_on-. Pwr_mode(0x0A) = 0x9c
  1282. [ 132.233862] synaptics_dsx_sensor_state: state change SUSPEND -> ACTIVE
  1283. [ 132.309706] bd65b60 1-0064: backlight on
  1284. [ 138.556224] wlan: module is from the staging directory, the quality is unknown, you have been warned.
  1285. [ 138.572332] wlan: loading driver v3.8.20.23
  1286. [ 138.579601] wlan: [2890:E :HDD] hdd_parse_config_ini: qcom_cfg.ini Size 9647
  1287. [ 138.579951] wlan: [2890:E :HDD] hdd_apply_cfg_ini: Reg Parameter gGoKeepAlivePeriod > allowed Maximum [30 > 20]. Enforcing Default= 5
  1288. [ 138.580765] wlan: [2890:E :HDD] hdd_apply_cfg_ini: Reg Parameter gAsdTriggerThreshold > allowed Maximum [4294967221 > 0]. Enforcing Default= 4294967221
  1289. [ 138.580944] wlan: [2890:E :HDD] hdd_is_5g_supported: Hardware doesn't supports 5Ghz
  1290. [ 138.580959] wlan: [2890:E :HDD] hdd_is_5g_supported: Hardware doesn't supports 5Ghz
  1291. [ 138.580977] wlan: [2890:E :HDD] wlan_hdd_cfg80211_init: wiphy->bands[i] is NULL, i = 1
  1292. [ 138.580988] wlan: [2890:E :HDD] wlan_hdd_cfg80211_init: wiphy->bands[i] is NULL, i = 2
  1293. [ 138.590018] wlan: [2890:E :VOS] INFO: NV version = 2 is loaded, driver supports NV version = 3
  1294. [ 138.590039] wlan: [2890:E :VOS] INFO: Driver supports NV3 CH144 by default, NV2 is currently loaded, NV2 will be used.
  1295. [ 138.590053] wlan: [2890:E :VOS] Invalid Parameter from NV Client macCount 4, pMacAddress (null)
  1296. [ 138.590346] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress: MAC1 from bootparams=1C:56:FE:F0:46:7F
  1297.  
  1298. [ 138.590376] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress: MAC2 from boot params=1C:56:FE:F0:52:FB
  1299.  
  1300. [ 138.590407] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress MAC address in global V21c:56:fe:f0:46:7f1c:56:fe:f0:52:fb1e:56:fe:f0:46:7f1e:56:fe:f0:52:fb
  1301. [ 138.590502] DefaultCountry is 00
  1302. [ 138.591148] wlan: [2890:E :PE ] cfgSetInt: 240: Value -75 out of range [0,120] cfg id 313
  1303. [ 138.591237] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress: pMacAddress[0]=1c:56:fe:f0:46:7f
  1304. [ 138.591250] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress: pMacAddress[1]=1c:56:fe:f0:52:fb
  1305. [ 138.591262] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress: pMacAddress[2]=1e:56:fe:f0:46:7f
  1306. [ 138.591275] wlan: [2890:E :VOS] vos_nv_readMultiMacAddress: pMacAddress[3]=1e:56:fe:f0:52:fb
  1307. [ 138.714833] wlan: WCNSS WLAN version 1.5.1.2
  1308. [ 138.714849] wlan: WCNSS software version CNSS-PR-2-0-1-1-c1-00049
  1309. [ 138.714859] wlan: WCNSS hardware version WCN v2.0 RadioPhy vRhea_GF_1.12 with 19.2MHz XO
  1310. [ 138.714872] wlan: [2890:E :CTL] Host caps b4c001ff 31f8f 0 80000000
  1311. [ 138.714880] wlan: [2890:E :CTL] Host Capability
  1312. [ 138.714901] wlan: [2890:E :CTL] MCC, P2P, DOT11AC, SLM_SESSIONIZATION, DOT11AC_OPMODE, SAP32STA, TDLS, P2P_GO_NOA_DECOUPLE_INIT_SCAN, WLANACTIVE_OFFLOAD, WOW, WLAN_ROAM_SCAN_OFFLOAD, , , , FW_IN_TX_PATH, EXTENDED_NSOFFLOAD_SLOT, CH_SWITCH_V1, HT40_OBSS_SCAN, , TDLS_SCAN_COEXISTENCE, LINK_LAYER_STATS_MEAS, MU_MIMO, EXTENDED_SCAN, DYNAMIC_WMM_PS, MAC_SPOOFED_SCAN, WPS_PRBRSP_TMPL, BCN_IE_FLT_DELTA,
  1313. [ 138.715078] DefaultCountry is 00
  1314. [ 138.715458] ieee80211 phy0: info: cfg80211 reg_notifier callback for country 00
  1315. [ 138.715481] ieee80211 phy0: info: set by driver ERROR
  1316. [ 138.715929] wlan: [2894:E :WDA] Update channel list capability Not Supported
  1317. [ 138.716019] wlan: [2894:E :CTL] FW caps fdf877fb 39dbf 0 0
  1318. [ 138.716027] wlan: [2894:E :CTL] Firmware Capability
  1319. [ 138.716046] wlan: [2894:E :CTL] MCC, P2P, SLM_SESSIONIZATION, DOT11AC_OPMODE, SAP32STA, TDLS, P2P_GO_NOA_DECOUPLE_INIT_SCAN, WLANACTIVE_OFFLOAD, BEACON_OFFLOAD, SCAN_OFFLOAD, BCN_MISS_OFFLOAD, STA_POWERSAVE, , BCN_FILTER, RTT, RATECTRL, WOW, WLAN_ROAM_SCAN_OFFLOAD, , , , , , , FW_IN_TX_PATH, EXTENDED_NSOFFLOAD_SLOT, CH_SWITCH_V1, HT40_OBSS_SCAN, , , , TDLS_SCAN_COEXISTENCE, LINK_LAYER_STATS_MEAS, EXTENDED_SCAN, DYNAMIC_WMM_PS, MAC_SPOOFED_SCAN, , WPS_PRBRSP_TMPL, BCN_IE_FLT_DELTA
  1320. [ 138.741890] wlan: [2890:E :HDD] wlan_hdd_tdls_init TDLS Implicit trigger not enabled!
  1321. [ 138.741986] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 1 NumBuff = 32
  1322. [ 138.747734] wlan_logging_sock_activate_svc: Activated wlan_logging svc
  1323. [ 138.747907] wlan: [2890:E :HDD] hdd_wlan_startup: 9424: Registered IPv6 notifier
  1324. [ 138.747929] wlan: [2890:E :HDD] hdd_wlan_startup: 9438: Registered IPv4 notifier
  1325. [ 138.747945] wlan: driver loaded
  1326. [ 138.749328] ieee80211 phy0: info: cfg80211 reg_notifier callback for country 00
  1327. [ 138.749357] ieee80211 phy0: info: set by driver ERROR
  1328. [ 140.315073] wlan: [1563:E :PMC] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  1329. [ 140.315102] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1330. [ 140.904032] ieee80211 phy0: info: cfg80211 reg_notifier callback for country 00
  1331. [ 140.904094] ieee80211 phy0: country: GB set by driver
  1332. [ 140.904106] wlan: [179:E :VOS] error: wiphy->bands[i] is NULL, i = 1
  1333. [ 140.904120] wlan: [179:E :VOS] error: wiphy->bands[i] is NULL, i = 2
  1334. [ 144.474830] wlan: [1703:E :HDD] __wlan_hdd_cfg80211_sched_scan_start: Network input is not correct 0 Max Network supported is 16
  1335. [ 147.287730] wlan: [2894:E :PE ] limProcessAssocRspFrame: 472: Filling tdls prohibited in session entry
  1336. [ 147.306503] wlan: [2894:E :PE ] wlan_cfgGetInt: 364: Not valid cfg id 1
  1337. [ 147.327121] wlan: 1c:56:fe:f0:46:7f connected to 90:94:e4:71:b9:e4
  1338. [ 147.327273] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1339. [ 147.327163] wlan(1) 90:94:e4:71:b9:e4 Standalone
  1340. [ 147.327644] wlan: [2894:E :SME] sme_UpdateDSCPtoUPMapping: QOS Mapping IE not present
  1341. [ 149.000074] wlan: [1703:E :SME] sme_FTUpdateKey: Unhandled state=0
  1342. [ 149.001512] wlan: [1703:E :SME] sme_FTUpdateKey: Unhandled state=0
  1343. [ 149.012745] wlan: [2894:E :CTL] WDI_ProcessHT40OBSSScanInd
  1344. [ 150.294532] wlan: [2894:E :WDA] BA Trigger RSP with Failure received
  1345. [ 151.291587] wlan: [2894:E :PE ] limProcessAddBaInd: 5671: BA setup for staId = 3, TID: 0, SSN: 20
  1346. [ 155.358758] wlan: [2894:E :SME] sme_QosPmcDeviceStateUpdateInd: 7443: nothing to process in PMC state BMPS (6)
  1347. [ 155.358781] wlan: [2894:E :TL ] ----> CRegion 0, hRSSI 0, Alpha 5
  1348. [ 162.220632] bd65b60 1-0064: backlight off
  1349. [ 162.224251] synaptics_dsx_sensor_state: state change ACTIVE -> SUSPEND
  1350. [ 162.270554] mdss_dsi_panel_off+: ctrl=e53fe010 ndx=0
  1351. [ 162.270557] mdss_dsi_panel_set_hbm: HBM is disabled, ignore request
  1352. [ 162.401561] mdss_dsi_panel_off-:
  1353. [ 162.401568] mdss_dsi_off+: ctrl=e53fe010 ndx=0
  1354. [ 162.403146] mdss_dsi_off-:
  1355. [ 171.330241] Report pwrkey press event at: 2017-08-20 10:33:20 UTC
  1356. [ 171.486982] Report pwrkey release event at: 2017-08-20 10:33:20 UTC
  1357. [ 171.498052] mdss_dsi_on+: ctrl=e53fe010 ndx=0
  1358. [ 171.549627] mdss_dsi_on-:
  1359. [ 171.549642] mdss_dsi_panel_on+: ctrl=e53fe010 ndx=0
  1360. [ 171.712807] mdss_dsi_panel_on-. Pwr_mode(0x0A) = 0x9c
  1361. [ 171.759148] synaptics_dsx_sensor_state: state change SUSPEND -> ACTIVE
  1362. [ 171.838565] bd65b60 1-0064: backlight on
  1363. [ 198.192526] bd65b60 1-0064: backlight off
  1364. [ 198.198940] synaptics_dsx_sensor_state: state change ACTIVE -> SUSPEND
  1365. [ 198.240089] mdss_dsi_panel_off+: ctrl=e53fe010 ndx=0
  1366. [ 198.240093] mdss_dsi_panel_set_hbm: HBM is disabled, ignore request
  1367. [ 198.370781] mdss_dsi_panel_off-:
  1368. [ 198.370787] mdss_dsi_off+: ctrl=e53fe010 ndx=0
  1369. [ 198.371822] mdss_dsi_off-:
  1370. [ 202.430061] wlan: [2894:E :HDP] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
  1371. [ 204.231527] Report pwrkey press event at: 2017-08-20 10:33:52 UTC
  1372. [ 204.362437] Report pwrkey release event at: 2017-08-20 10:33:53 UTC
  1373. [ 204.368527] mdss_dsi_on+: ctrl=e53fe010 ndx=0
  1374. [ 204.419766] mdss_dsi_on-:
  1375. [ 204.419780] mdss_dsi_panel_on+: ctrl=e53fe010 ndx=0
  1376. [ 204.583049] mdss_dsi_panel_on-. Pwr_mode(0x0A) = 0x9c
  1377. [ 204.629426] synaptics_dsx_sensor_state: state change SUSPEND -> ACTIVE
  1378. [ 204.704451] bd65b60 1-0064: backlight on
  1379. [ 212.427341] Thread (pooled) (2947) used greatest stack depth: 4680 bytes left
  1380. [ 216.222644] systemd-journald[505]: Vacuuming done, freed 2146304 bytes
  1381. [ 224.432507] wlan: [2894:F :CTL] WDI_printRegInfo: regCount: 9 scenario: 2 reasonCode: 8
  1382. [ 224.432523] wlan: [2894:F :CTL] a080eb4: 0
  1383. [ 224.432532] wlan: [2894:F :CTL] a080e20: 10ea500
  1384. [ 224.432540] wlan: [2894:F :CTL] a08040c: 3000
  1385. [ 224.432548] wlan: [2894:F :CTL] a0821b8: 8f
  1386. [ 224.432555] wlan: [2894:F :CTL] a013c50: 28
  1387. [ 224.432563] wlan: [2894:F :CTL] a013c5c: 12
  1388. [ 224.432570] wlan: [2894:F :CTL] a013d38: 8c
  1389. [ 224.432578] wlan: [2894:F :CTL] a0800f4: 800007ff
  1390. [ 224.432586] wlan: [2894:F :CTL] a0801d0: 0
  1391. [ 237.499761] wlan: [2894:E :HDP] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
  1392. [ 276.124951] bd65b60 1-0064: backlight off
  1393. [ 276.155513] synaptics_dsx_sensor_state: state change ACTIVE -> SUSPEND
  1394. [ 276.199635] mdss_dsi_panel_off+: ctrl=e53fe010 ndx=0
  1395. [ 276.199638] mdss_dsi_panel_set_hbm: HBM is disabled, ignore request
  1396. [ 276.330628] mdss_dsi_panel_off-:
  1397. [ 276.330636] mdss_dsi_off+: ctrl=e53fe010 ndx=0
  1398. [ 276.332166] mdss_dsi_off-:
  1399. [ 277.589
RAW Paste Data