API tools faq
paste
Advertisement
dippes

libreelec system.log

dippes
Aug 28th, 2021
180
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.56 KB | None | 0 0
raw download clone embed print report
  1. ################################################################################
  2. # ... output of dmesg
  3. # LibreELEC release: RPi4.arm-9.2.8
  4. #
  5. ################################################################################
  6. [ 0.000000] Booting Linux on physical CPU 0x0
  7. [ 0.000000] Linux version 4.19.127 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Tue Jul 6 19:08:37 CEST 2021
  8. [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  9. [ 0.000000] CPU: div instructions available: patching division code
  10. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  11. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
  12. [ 0.000000] Memory policy: Data cache writealloc
  13. [ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000
  14. [ 0.000000] On node 0 totalpages: 950016
  15. [ 0.000000] DMA zone: 1582 pages used for memmap
  16. [ 0.000000] DMA zone: 0 pages reserved
  17. [ 0.000000] DMA zone: 179968 pages, LIFO batch:63
  18. [ 0.000000] HighMem zone: 770048 pages, LIFO batch:63
  19. [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d8 with crng_init=0
  20. [ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632
  21. [ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096
  22. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  23. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 948434
  24. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=DC:A6:32:33:39:D4 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 boot=UUID=2705-4133 disk=UUID=f676849c-14fd-415d-9a0a-2d51e19df98b quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 3480952K/3800064K available (10240K kernel code, 760K rwdata, 2256K rodata, 6144K init, 559K bss, 56968K reserved, 262144K cma-reserved, 3080192K highmem)
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  31. [ 0.000000] vmalloc : 0xec000000 - 0xff800000 ( 312 MB)
  32. [ 0.000000] lowmem : 0xc0000000 - 0xebf00000 ( 703 MB)
  33. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  34. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  35. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)
  36. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB)
  37. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 761 kB)
  38. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 560 kB)
  39. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. [ 0.000000] ftrace: allocating 32912 entries in 97 pages
  41. [ 0.000000] rcu: Hierarchical RCU implementation.
  42. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  43. [ 0.000000] GIC: Using split EOI/Deactivate mode
  44. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  45. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  46. [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  47. [ 0.000017] Switching to timer-based delay loop, resolution 18ns
  48. [ 0.000255] Console: colour dummy device 80x30
  49. [ 0.000287] console [tty0] enabled
  50. [ 0.000337] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
  51. [ 0.000358] pid_max: default: 32768 minimum: 301
  52. [ 0.000549] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  53. [ 0.000572] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.001315] CPU: Testing write buffer coherency: ok
  55. [ 0.001809] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  56. [ 0.002609] Setting up static identity map for 0x200000 - 0x20003c
  57. [ 0.002807] rcu: Hierarchical SRCU implementation.
  58. [ 0.005395] smp: Bringing up secondary CPUs ...
  59. [ 0.006415] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  60. [ 0.007594] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  61. [ 0.008686] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  62. [ 0.008834] smp: Brought up 1 node, 4 CPUs
  63. [ 0.008851] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  64. [ 0.008864] CPU: All CPU(s) started in HYP mode.
  65. [ 0.008876] CPU: Virtualization extensions available.
  66. [ 0.009623] devtmpfs: initialized
  67. [ 0.020822] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  68. [ 0.021046] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  69. [ 0.021072] futex hash table entries: 1024 (order: 4, 65536 bytes)
  70. [ 0.027297] pinctrl core: initialized pinctrl subsystem
  71. [ 0.028281] NET: Registered protocol family 16
  72. [ 0.032027] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  73. [ 0.033053] cpuidle: using governor ladder
  74. [ 0.033101] cpuidle: using governor menu
  75. [ 0.033658] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  76. [ 0.033671] hw-breakpoint: maximum watchpoint size is 8 bytes.
  77. [ 0.033882] Serial: AMBA PL011 UART driver
  78. [ 0.038666] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  79. [ 0.050176] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-26 14:49, variant start_x
  80. [ 0.053524] raspberrypi-firmware soc:firmware: Firmware hash is b078012603a6a094178f959805996ad225a0d83b
  81. [ 0.095134] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  82. [ 0.099700] vgaarb: loaded
  83. [ 0.100021] SCSI subsystem initialized
  84. [ 0.100229] usbcore: registered new interface driver usbfs
  85. [ 0.100284] usbcore: registered new interface driver hub
  86. [ 0.100443] usbcore: registered new device driver usb
  87. [ 0.101004] Advanced Linux Sound Architecture Driver Initialized.
  88. [ 0.102043] clocksource: Switched to clocksource arch_sys_counter
  89. [ 0.190027] FS-Cache: Loaded
  90. [ 0.200474] NET: Registered protocol family 2
  91. [ 0.201175] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  92. [ 0.201205] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  93. [ 0.201266] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  94. [ 0.201335] TCP: Hash tables configured (established 8192 bind 8192)
  95. [ 0.201468] UDP hash table entries: 512 (order: 2, 16384 bytes)
  96. [ 0.201510] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  97. [ 0.201751] NET: Registered protocol family 1
  98. [ 0.202432] RPC: Registered named UNIX socket transport module.
  99. [ 0.202445] RPC: Registered udp transport module.
  100. [ 0.202458] RPC: Registered tcp transport module.
  101. [ 0.202470] RPC: Registered tcp NFSv4.1 backchannel transport module.
  102. [ 0.202490] PCI: CLS 0 bytes, default 64
  103. [ 0.225580] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  104. [ 0.227949] Initialise system trusted keyrings
  105. [ 0.228138] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  106. [ 0.237218] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  107. [ 0.237907] FS-Cache: Netfs 'nfs' registered for caching
  108. [ 0.238446] NFS: Registering the id_resolver key type
  109. [ 0.238489] Key type id_resolver registered
  110. [ 0.238503] Key type id_legacy registered
  111. [ 0.238526] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  112. [ 0.239095] FS-Cache: Netfs 'cifs' registered for caching
  113. [ 0.246555] Key type asymmetric registered
  114. [ 0.246570] Asymmetric key parser 'x509' registered
  115. [ 0.246757] bounce: pool size: 64 pages
  116. [ 0.246812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  117. [ 0.246828] io scheduler noop registered (default)
  118. [ 0.246842] io scheduler deadline registered
  119. [ 0.246991] io scheduler cfq registered
  120. [ 0.247006] io scheduler mq-deadline registered
  121. [ 0.247020] io scheduler kyber registered
  122. [ 0.247177] io scheduler bfq registered
  123. [ 0.272589] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
  124. [ 0.272615] brcm-pcie fd500000.pcie: could not get clock
  125. [ 0.272708] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  126. [ 0.272762] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
  127. [ 0.322094] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
  128. [ 0.322358] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  129. [ 0.322377] pci_bus 0000:00: root bus resource [bus 00-01]
  130. [ 0.322397] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  131. [ 0.322464] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  132. [ 0.322686] pci 0000:00:00.0: PME# supported from D0 D3hot
  133. [ 0.325550] PCI: bus0: Fast back to back transfers disabled
  134. [ 0.325781] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  135. [ 0.325928] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  136. [ 0.326348] pci 0000:01:00.0: PME# supported from D0 D3cold
  137. [ 0.329176] PCI: bus1: Fast back to back transfers disabled
  138. [ 0.329259] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  139. [ 0.329282] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  140. [ 0.329364] pci 0000:00:00.0: PCI bridge to [bus 01]
  141. [ 0.329388] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  142. [ 0.329656] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  143. [ 0.329884] pcieport 0000:00:00.0: Signaling PME with IRQ 54
  144. [ 0.330100] pcieport 0000:00:00.0: AER enabled with IRQ 54
  145. [ 0.330324] pci 0000:01:00.0: enabling device (0140 -> 0142)
  146. [ 0.334267] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  147. [ 0.336501] iproc-rng200 fe104000.rng: hwrng registered
  148. [ 0.336813] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
  149. [ 0.337400] vc-sm: Videocore shared memory driver
  150. [ 0.344417] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5fa58)
  151. [ 0.344951] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
  152. [ 0.344966] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  153. [ 0.344978] [drm] No driver support for vblank timestamp query.
  154. [ 0.344990] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  155. [ 0.572328] Console: switching to colour frame buffer device 160x45
  156. [ 0.588979] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
  157. [ 0.600528] brd: module loaded
  158. [ 0.600646] loop: module loaded
  159. [ 0.621429] usbcore: registered new interface driver rtsx_usb
  160. [ 0.622514] Loading iSCSI transport class v2.0-870.
  161. [ 0.622944] iscsi: registered transport (tcp)
  162. [ 0.624617] libphy: Fixed MDIO Bus: probed
  163. [ 0.624666] tun: Universal TUN/TAP device driver, 1.6
  164. [ 0.625448] bcmgenet fd580000.genet: failed to get enet clock
  165. [ 0.625467] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
  166. [ 0.625490] bcmgenet fd580000.genet: failed to get enet-wol clock
  167. [ 0.625511] bcmgenet fd580000.genet: failed to get enet-eee clock
  168. [ 0.625538] bcmgenet: Skipping UMAC reset
  169. [ 0.625928] unimac-mdio unimac-mdio.-19: DMA mask not set
  170. [ 0.638755] libphy: bcmgenet MII bus: probed
  171. [ 0.666229] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
  172. [ 0.667231] usbcore: registered new interface driver lan78xx
  173. [ 0.667281] usbcore: registered new interface driver dm9601
  174. [ 0.667349] usbcore: registered new interface driver smsc95xx
  175. [ 0.667738] xhci_hcd 0000:01:00.0: xHCI Host Controller
  176. [ 0.667772] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  177. [ 0.670520] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
  178. [ 0.670852] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 55
  179. [ 0.671788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  180. [ 0.671806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  181. [ 0.671822] usb usb1: Product: xHCI Host Controller
  182. [ 0.671838] usb usb1: Manufacturer: Linux 4.19.127 xhci-hcd
  183. [ 0.671852] usb usb1: SerialNumber: 0000:01:00.0
  184. [ 0.672456] hub 1-0:1.0: USB hub found
  185. [ 0.672550] hub 1-0:1.0: 1 port detected
  186. [ 0.673087] xhci_hcd 0000:01:00.0: xHCI Host Controller
  187. [ 0.673112] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  188. [ 0.673136] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  189. [ 0.673607] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  190. [ 0.673624] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  191. [ 0.673639] usb usb2: Product: xHCI Host Controller
  192. [ 0.673654] usb usb2: Manufacturer: Linux 4.19.127 xhci-hcd
  193. [ 0.673668] usb usb2: SerialNumber: 0000:01:00.0
  194. [ 0.674203] hub 2-0:1.0: USB hub found
  195. [ 0.674291] hub 2-0:1.0: 4 ports detected
  196. [ 0.675786] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  197. [ 0.676092] dwc_otg: FIQ enabled
  198. [ 0.676105] dwc_otg: NAK holdoff enabled
  199. [ 0.676118] dwc_otg: FIQ split-transaction FSM enabled
  200. [ 0.676133] Module dwc_common_port init
  201. [ 0.676568] usbcore: registered new interface driver uas
  202. [ 0.676674] usbcore: registered new interface driver usb-storage
  203. [ 0.676864] mousedev: PS/2 mouse device common for all mice
  204. [ 0.677228] i2c /dev entries driver
  205. [ 0.679968] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  206. [ 0.682322] sdhci: Secure Digital Host Controller Interface driver
  207. [ 0.682335] sdhci: Copyright(c) Pierre Ossman
  208. [ 0.682878] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  209. [ 0.683472] sdhci-pltfm: SDHCI platform and OF driver helper
  210. [ 0.685825] ledtrig-cpu: registered to indicate activity on CPUs
  211. [ 0.685899] hidraw: raw HID events driver (C) Jiri Kosina
  212. [ 0.687104] usbcore: registered new interface driver usbhid
  213. [ 0.687110] usbhid: USB HID core driver
  214. [ 0.687542] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  215. [ 0.688583] [vc_sm_connected_init]: start
  216. [ 0.694645] [vc_sm_connected_init]: end - returning 0
  217. [ 0.695270] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  218. [ 0.695278] [vc_sm_connected_init]: start
  219. [ 0.695463] [vc_sm_connected_init]: installed successfully
  220. [ 0.696496] NET: Registered protocol family 10
  221. [ 0.697250] Segment Routing with IPv6
  222. [ 0.697299] NET: Registered protocol family 17
  223. [ 0.697355] Key type dns_resolver registered
  224. [ 0.697549] Registering SWP/SWPB emulation handler
  225. [ 0.697902] Loading compiled-in X.509 certificates
  226. [ 0.703136] uart-pl011 fe201000.serial: cts_event_workaround enabled
  227. [ 0.703184] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
  228. [ 0.709193] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 35, base_baud = 62500000) is a 16550
  229. [ 0.709646] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  230. [ 0.709980] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
  231. [ 0.710390] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  232. [ 0.710396] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  233. [ 0.735637] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
  234. [ 0.735748] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
  235. [ 0.757164] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  236. [ 0.758805] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  237. [ 0.760438] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  238. [ 0.763371] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  239. [ 0.765001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  240. [ 0.765133] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  241. [ 0.770513] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  242. [ 0.774197] console [netcon0] enabled
  243. [ 0.774205] netconsole: network logging started
  244. [ 0.774213] of_cfs_init
  245. [ 0.774231] of_cfs_init: OK
  246. [ 0.774608] ALSA device list:
  247. [ 0.774616] No soundcards found.
  248. [ 0.784511] Freeing unused kernel memory: 6144K
  249. [ 0.785521] Run /init as init process
  250. [ 0.808752] random: fast init done
  251. [ 0.842461] mmc1: new high speed SDIO card at address 0001
  252. [ 0.856225] Checking disk(s): UUID=2705-4133 UUID=f676849c-14fd-415d-9a0a-2d51e19df98b
  253. [ 1.009080] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  254. [ 1.026720] usb 2-2: New USB device found, idVendor=174c, idProduct=1156, bcdDevice= 1.00
  255. [ 1.026727] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  256. [ 1.026733] usb 2-2: Product: Forty
  257. [ 1.026739] usb 2-2: Manufacturer: Argon
  258. [ 1.026745] usb 2-2: SerialNumber: 0000000000E4
  259. [ 1.038284] scsi host0: uas
  260. [ 1.039041] scsi 0:0:0:0: Direct-Access Argon Forty 0 PQ: 0 ANSI: 6
  261. [ 1.040209] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  262. [ 1.040336] sd 0:0:0:0: [sda] Write Protect is off
  263. [ 1.040343] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  264. [ 1.040580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  265. [ 1.041084] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
  266. [ 1.042752] sda: sda1 sda2
  267. [ 1.044112] sd 0:0:0:0: [sda] Attached SCSI disk
  268. [ 1.148719] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  269. [ 1.289839] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  270. [ 1.289846] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  271. [ 1.289853] usb 1-1: Product: USB2.0 Hub
  272. [ 1.290833] hub 1-1:1.0: USB hub found
  273. [ 1.291147] hub 1-1:1.0: 4 ports detected
  274. [ 1.486453] fsck: CP437: Invalid argument
  275. [ 1.486595] fsck: fsck.fat 4.1 (2017-01-24)
  276. [ 1.486789] fsck: /dev/sda1: 226 files, 18491/65501 clusters
  277. [ 1.487042] fsck: STORAGE: clean, 12411/7548928 files, 2979978/30191616 blocks
  278. [ 1.721514] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  279. [ 1.931691] systemd[1]: System time before build time, advancing clock.
  280. [ 1.938032] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  281. [ 1.938349] systemd[1]: Detected architecture arm.
  282. [ 1.941427] systemd[1]: Set hostname to <LibreELEC>.
  283. [ 1.942607] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
  284. [ 2.056790] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  285. [ 2.056851] random: systemd: uninitialized urandom read (16 bytes read)
  286. [ 2.058585] systemd[1]: Created slice User and Session Slice.
  287. [ 2.058757] random: systemd: uninitialized urandom read (16 bytes read)
  288. [ 2.059177] systemd[1]: Listening on Journal Socket (/dev/log).
  289. [ 2.059294] random: systemd: uninitialized urandom read (16 bytes read)
  290. [ 2.061734] systemd[1]: Starting Show Version...
  291. [ 2.062129] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  292. [ 2.062614] systemd[1]: Listening on udev Kernel Socket.
  293. [ 2.135861] kernel-overlays-setup: setup base modules
  294. [ 2.186803] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.127
  295. [ 2.219160] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  296. [ 2.219290] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  297. [ 2.219869] kernel-overlays-setup: done
  298. [ 2.276377] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
  299. [ 2.276383] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  300. [ 2.383931] systemd-journald[212]: Received request to flush runtime journal from PID 1
  301. [ 2.671658] random: crng init done
  302. [ 2.671666] random: 7 urandom warning(s) missed due to ratelimiting
  303. [ 3.390304] media: Linux media interface: v0.10
  304. [ 3.404287] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
  305. [ 3.405143] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
  306. [ 3.415919] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
  307. [ 3.417876] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
  308. [ 3.430696] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  309. [ 3.473609] videodev: Linux video capture interface: v2.00
  310. [ 3.491235] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  311. [ 3.502094] Registered IR keymap rc-rc6-mce
  312. [ 3.540203] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  313. [ 3.557537] IR RC6 protocol handler initialized
  314. [ 3.569401] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  315. [ 3.573077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  316. [ 3.582142] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@17/rc/rc0
  317. [ 3.582225] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
  318. [ 3.582316] input: gpio_ir_recv as /devices/platform/ir-receiver@17/rc/rc0/input0
  319. [ 3.602294] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  320. [ 3.602316] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  321. [ 3.618300] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  322. [ 3.618320] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  323. [ 3.621919] brcmfmac: F1 signature read @0x18000000=0x15264345
  324. [ 3.634300] : bcm2835_codec_get_supported_fmts: port has more encoding than we provided space for. Some are dropped.
  325. [ 3.636636] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  326. [ 3.636656] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  327. [ 3.649244] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  328. [ 3.654368] usbcore: registered new interface driver brcmfmac
  329. [ 3.665809] bcmgenet: Skipping UMAC reset
  330. [ 3.738593] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
  331. [ 3.739416] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  332. [ 3.753081] IR NEC protocol handler initialized
  333. [ 3.907917] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  334. [ 3.929097] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  335. [ 4.181738] input: lircd-uinput as /devices/virtual/input/input2
  336. [ 4.199801] uart-pl011 fe201000.serial: no DMA platform data
  337. [ 4.326637] input: eventlircd as /devices/virtual/input/input3
  338. [ 4.745644] bcmgenet fd580000.genet eth0: Link is Down
  339. [ 8.798939] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  340. [ 8.798985] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  341. [ 8.816878] 8021q: 802.1Q VLAN Support v1.8
  342. [ 10.770846] Bluetooth: Core ver 2.22
  343. [ 10.770906] NET: Registered protocol family 31
  344. [ 10.770912] Bluetooth: HCI device and connection manager initialized
  345. [ 10.770926] Bluetooth: HCI socket layer initialized
  346. [ 10.770935] Bluetooth: L2CAP socket layer initialized
  347. [ 10.770959] Bluetooth: SCO socket layer initialized
  348. [ 10.780782] Bluetooth: HCI UART driver ver 2.3
  349. [ 10.780792] Bluetooth: HCI UART protocol H4 registered
  350. [ 10.780835] Bluetooth: HCI UART protocol Three-wire (H5) registered
  351. [ 10.781812] Bluetooth: HCI UART protocol Broadcom registered
  352. [ 10.932045] mmc0: Timeout waiting for hardware cmd interrupt.
  353. [ 10.932051] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
  354. [ 10.932056] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
  355. [ 10.932061] mmc0: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
  356. [ 10.932064] mmc0: sdhci: Argument: 0x80000c08 | Trn mode: 0x00000000
  357. [ 10.932068] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x00000001
  358. [ 10.932072] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
  359. [ 10.932076] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447
  360. [ 10.932079] mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
  361. [ 10.932083] mmc0: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
  362. [ 10.932087] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
  363. [ 10.932090] mmc0: sdhci: Caps: 0x45ee6432 | Caps_1: 0x0000a525
  364. [ 10.932094] mmc0: sdhci: Cmd: 0x0000341a | Max curr: 0x00080008
  365. [ 10.932097] mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
  366. [ 10.932101] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
  367. [ 10.932104] mmc0: sdhci: Host ctl2: 0x00000000
  368. [ 10.932107] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
  369. [ 10.932110] mmc0: sdhci: ============================================
  370. [ 20.958712] mmc0: Timeout waiting for hardware cmd interrupt.
  371. [ 20.958720] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
  372. [ 20.958726] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
  373. [ 20.958730] mmc0: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
  374. [ 20.958734] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
  375. [ 20.958738] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x00000001
  376. [ 20.958742] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
  377. [ 20.958746] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447
  378. [ 20.958750] mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
  379. [ 20.958753] mmc0: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
  380. [ 20.958757] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
  381. [ 20.958760] mmc0: sdhci: Caps: 0x45ee6432 | Caps_1: 0x0000a525
  382. [ 20.958764] mmc0: sdhci: Cmd: 0x00000502 | Max curr: 0x00080008
  383. [ 20.958768] mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
  384. [ 20.958771] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
  385. [ 20.958774] mmc0: sdhci: Host ctl2: 0x00000000
  386. [ 20.958778] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
  387. [ 20.958781] mmc0: sdhci: ============================================
  388. [ 30.985366] mmc0: Timeout waiting for hardware cmd interrupt.
  389. [ 30.985372] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
  390. [ 30.985380] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
  391. [ 30.985386] mmc0: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
  392. [ 30.985391] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
  393. [ 30.985397] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x00000001
  394. [ 30.985403] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
  395. [ 30.985409] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447
  396. [ 30.985414] mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
  397. [ 30.985419] mmc0: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
  398. [ 30.985424] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
  399. [ 30.985430] mmc0: sdhci: Caps: 0x45ee6432 | Caps_1: 0x0000a525
  400. [ 30.985435] mmc0: sdhci: Cmd: 0x0000371a | Max curr: 0x00080008
  401. [ 30.985441] mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
  402. [ 30.985445] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
  403. [ 30.985450] mmc0: sdhci: Host ctl2: 0x00000000
  404. [ 30.985455] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
  405. [ 30.985459] mmc0: sdhci: ============================================
  406. [ 44.638705] mmc0: Timeout waiting for hardware cmd interrupt.
  407. [ 44.638714] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
  408. [ 44.638724] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
  409. [ 44.638732] mmc0: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
  410. [ 44.638739] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
  411. [ 44.638747] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x00000001
  412. [ 44.638754] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
  413. [ 44.638761] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447
  414. [ 44.638768] mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
  415. [ 44.638775] mmc0: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
  416. [ 44.638782] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
  417. [ 44.638790] mmc0: sdhci: Caps: 0x45ee6432 | Caps_1: 0x0000a525
  418. [ 44.638797] mmc0: sdhci: Cmd: 0x00000502 | Max curr: 0x00080008
  419. [ 44.638804] mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
  420. [ 44.638810] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
  421. [ 44.638816] mmc0: sdhci: Host ctl2: 0x00000000
  422. [ 44.638823] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
  423. [ 44.638829] mmc0: sdhci: ============================================
  424.  
  425. ################################################################################
  426. # ... output of lsmod
  427. # LibreELEC release: RPi4.arm-9.2.8
  428. #
  429. ################################################################################
  430. Module Size Used by
  431. hci_uart 40960 1
  432. btbcm 16384 1 hci_uart
  433. serdev 16384 1 hci_uart
  434. bluetooth 434176 3 hci_uart,btbcm
  435. ecdh_generic 28672 1 bluetooth
  436. 8021q 28672 0
  437. ir_nec_decoder 16384 0
  438. brcmfmac 258048 0
  439. brcmutil 16384 1 brcmfmac
  440. bcm2835_codec 32768 0
  441. videobuf2_dma_contig 20480 1 bcm2835_codec
  442. videobuf2_memops 16384 1 videobuf2_dma_contig
  443. ir_rc6_decoder 16384 0
  444. bcm2835_mmal_vchiq 28672 1 bcm2835_codec
  445. v4l2_mem2mem 20480 1 bcm2835_codec
  446. videobuf2_v4l2 20480 2 bcm2835_codec,v4l2_mem2mem
  447. videobuf2_common 36864 3 bcm2835_codec,v4l2_mem2mem,videobuf2_v4l2
  448. cfg80211 512000 1 brcmfmac
  449. rc_rc6_mce 16384 0
  450. rfkill 24576 3 bluetooth,cfg80211
  451. videodev 151552 4 bcm2835_codec,videobuf2_common,v4l2_mem2mem,videobuf2_v4l2
  452. i2c_bcm2835 16384 1
  453. bcm2835_gpiomem 16384 2
  454. rpivid_mem 16384 0
  455. media 28672 3 bcm2835_codec,videodev,v4l2_mem2mem
  456. gpio_ir_recv 16384 0
  457. rc_core 40960 6 ir_rc6_decoder,ir_nec_decoder,rc_rc6_mce,gpio_ir_recv
  458. wireguard 139264 0
  459. ip6_udp_tunnel 16384 1 wireguard
  460. udp_tunnel 16384 1 wireguard
  461.  
  462. ################################################################################
  463. # ... output of ps xa
  464. # LibreELEC release: RPi4.arm-9.2.8
  465. #
  466. ################################################################################
  467. PID USER TIME COMMAND
  468. 1 root 0:01 /usr/lib/systemd/systemd
  469. 2 root 0:00 [kthreadd]
  470. 3 root 0:00 [rcu_gp]
  471. 4 root 0:00 [rcu_par_gp]
  472. 5 root 0:00 [kworker/0:0-mem]
  473. 6 root 0:00 [kworker/0:0H-kb]
  474. 7 root 0:00 [kworker/u8:0-fl]
  475. 8 root 0:00 [mm_percpu_wq]
  476. 9 root 0:00 [ksoftirqd/0]
  477. 10 root 0:00 [rcu_sched]
  478. 11 root 0:00 [rcu_bh]
  479. 12 root 0:00 [migration/0]
  480. 13 root 0:00 [cpuhp/0]
  481. 14 root 0:00 [cpuhp/1]
  482. 15 root 0:00 [migration/1]
  483. 16 root 0:00 [ksoftirqd/1]
  484. 17 root 0:00 [kworker/1:0-mm_]
  485. 18 root 0:00 [kworker/1:0H-kb]
  486. 19 root 0:00 [cpuhp/2]
  487. 20 root 0:00 [migration/2]
  488. 21 root 0:00 [ksoftirqd/2]
  489. 22 root 0:00 [kworker/2:0-mem]
  490. 23 root 0:00 [kworker/2:0H-kb]
  491. 24 root 0:00 [cpuhp/3]
  492. 25 root 0:00 [migration/3]
  493. 26 root 0:00 [ksoftirqd/3]
  494. 27 root 0:00 [kworker/3:0-mem]
  495. 28 root 0:00 [kworker/3:0H-kb]
  496. 29 root 0:00 [kdevtmpfs]
  497. 30 root 0:00 [netns]
  498. 31 root 0:00 [kworker/0:1-eve]
  499. 32 root 0:00 [kworker/1:1-mem]
  500. 33 root 0:00 [kworker/2:1-mem]
  501. 34 root 0:00 [oom_reaper]
  502. 35 root 0:00 [writeback]
  503. 36 root 0:00 [kcompactd0]
  504. 37 root 0:00 [crypto]
  505. 38 root 0:00 [kblockd]
  506. 39 root 0:00 [kworker/3:1-cgr]
  507. 40 root 0:00 [watchdogd]
  508. 41 root 0:00 [rpciod]
  509. 42 root 0:00 [kworker/u9:0-hc]
  510. 43 root 0:00 [xprtiod]
  511. 48 root 0:00 [kswapd0]
  512. 49 root 0:00 [nfsiod]
  513. 50 root 0:00 [cifsiod]
  514. 51 root 0:00 [cifsoplockd]
  515. 80 root 0:00 [iscsi_eh]
  516. 81 root 0:00 [kworker/u8:1-ev]
  517. 83 root 0:00 [DWC Notificatio]
  518. 84 root 0:00 [uas]
  519. 85 root 0:00 [vchiq-slot/0]
  520. 86 root 0:00 [vchiq-recy/0]
  521. 87 root 0:00 [vchiq-sync/0]
  522. 88 root 0:00 [vchiq-keep/0]
  523. 89 root 0:00 [SMIO]
  524. 90 root 0:00 [SMIO]
  525. 91 root 0:00 [ipv6_addrconf]
  526. 92 root 0:00 [kworker/1:2-eve]
  527. 93 root 0:00 [irq/37-brcmstb_]
  528. 94 root 0:00 [irq/38-mmc1]
  529. 95 root 0:00 [kworker/1:3+eve]
  530. 96 root 0:00 [irq/38-mmc0]
  531. 97 root 0:00 [kworker/1:4-eve]
  532. 98 root 0:00 [v3d_bin]
  533. 99 root 0:00 [v3d_render]
  534. 100 root 0:00 [v3d_tfu]
  535. 101 root 0:00 [v3d_csd]
  536. 102 root 0:00 [v3d_cache_clean]
  537. 128 root 0:00 [scsi_eh_0]
  538. 129 root 0:00 [scsi_tmf_0]
  539. 141 root 0:00 [loop0]
  540. 142 root 0:00 [kworker/1:1H-kb]
  541. 143 root 0:00 [kworker/2:1H-kb]
  542. 145 root 0:00 [kworker/0:1H-kb]
  543. 146 root 0:00 [jbd2/sda2-8]
  544. 147 root 0:00 [ext4-rsv-conver]
  545. 160 root 0:00 [kworker/3:1H-kb]
  546. 201 root 0:00 [kworker/3:2-eve]
  547. 211 root 0:00 [kworker/3:3]
  548. 212 root 0:00 /usr/lib/systemd/systemd-journald
  549. 232 root 0:00 /usr/bin/rpcbind -f
  550. 259 root 0:00 /usr/lib/systemd/systemd-udevd
  551. 264 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd
  552. 267 root 0:00 /usr/bin/pulseaudio --system --disallow-exit --exit-idle-time=-1 --disable-shm
  553. 270 root 0:00 /usr/lib/systemd/systemd-logind
  554. 278 root 0:00 [kworker/0:2-eve]
  555. 289 dbus 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
  556. 298 root 0:00 /usr/sbin/connman-vpnd -n
  557. 299 root 0:00 /sbin/crond -f -S
  558. 304 root 0:00 /usr/sbin/sshd -D -o PasswordAuthentication no
  559. 305 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf
  560. 328 root 0:00 [kworker/u8:2]
  561. 340 root 0:00 [mmal-vchiq]
  562. 341 root 0:00 [cfg80211]
  563. 344 root 0:00 [rc0]
  564. 345 root 0:00 [brcmf_wq/mmc1:0]
  565. 346 root 0:00 [mmal-vchiq]
  566. 347 root 0:00 [mmal-vchiq]
  567. 349 root 0:00 [brcmf_wdog/mmc1]
  568. 365 root 0:00 /usr/bin/wpa_supplicant -u
  569. 368 root 0:00 /usr/sbin/lircd --nodaemon /storage/.config/lircd.conf
  570. 369 root 0:00 /usr/sbin/lircd-uinput --add-release-events
  571. 370 avahi 0:00 avahi-daemon: running [Media-Wohnzimmer.local]
  572. 375 root 0:00 [kworker/2:2-mem]
  573. 377 root 0:00 [uname]
  574. 385 root 0:00 /usr/sbin/nmbd
  575. 387 root 0:00 /usr/sbin/smbd
  576. 389 root 0:00 /usr/bin/python /storage/.config/argononed.py
  577. 393 root 0:00 {smbd-notifyd} /usr/sbin/smbd
  578. 394 root 0:00 {cleanupd} /usr/sbin/smbd
  579. 405 root 0:00 {lpqd} /usr/sbin/smbd
  580. 406 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs
  581. 410 root 0:37 /usr/lib/kodi/kodi.bin --standalone -fs
  582. 439 root 0:00 [kworker/u9:1-hc]
  583. 440 root 0:00 [kworker/u9:2-hc]
  584. 441 root 0:00 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow -
  585. 631 root 0:00 sshd: root@pts/0
  586. 633 root 0:00 -sh
  587. 640 root 0:00 /usr/sbin/smbd
  588. 641 root 0:00 {createlog} /bin/sh /usr/bin/createlog
  589. 669 root 0:00 ps xa
  590.  
  591. ################################################################################
  592. # ... output of cat /storage/.config/modprobe.d/ati-remote-channelmask.conf
  593. # LibreELEC release: RPi4.arm-9.2.8
  594. #
  595. ################################################################################
  596. options ati_remote channel_mask=61439
  597. # echo "65535 - 2 ^ 1" # Kanal 1 mask=65533
  598. # echo "65535 - 2 ^ 2" # Kanal 2 mask=65531
  599. # echo "65535 - 2 ^ 3" # Kanal 3 mask=65527
  600. # echo "65535 - 2 ^ 4" # Kanal 4 mask=65519
  601. # echo "65535 - 2 ^ 5" # Kanal 5 mask=65503
  602. # echo "65535 - 2 ^ 6" # Kanal 6 mask=65471
  603. # echo "65535 - 2 ^ 7" # Kanal 7 mask=65407
  604. # echo "65535 - 2 ^ 8" # Kanal 8 mask=65279
  605. # echo "65535 - 2 ^ 9" # Kanal 9 mask=65023
  606. # echo "65535 - 2 ^ 10" # Kanal 10 mask=64511
  607. # echo "65535 - 2 ^ 11" # Kanal 11 mask=63487
  608. # echo "65535 - 2 ^ 12" # Kanal 12 mask=61439
  609. # echo "65535 - 2 ^ 13" # Kanal 13 mask=57343
  610. # echo "65535 - 2 ^ 14" # Kanal 14 mask=49151
  611. # echo "65535 - 2 ^ 15" # Kanal 15 mask=32767
  612. # echo "65535 - 2 ^ 16" # Kanal 16 mask=-1
  613.  
  614.  
  615.  
  616. ################################################################################
  617. # ... output of cat /storage/.config/modprobe.d/disable-spdif-for-hd-audio.conf
  618. # LibreELEC release: RPi4.arm-9.2.8
  619. #
  620. ################################################################################
  621. # INTEL HBR WORKAROUND FOR DTS-MA & Dolby TrueHD PLAYBACK
  622.  
  623. # Uncomment the following lines to disable any S/PDIF out to deliver
  624. # bitstreamed audio on Intel builds. This is a rough workaround for
  625. # users that have both S/PDIF and HDMI audio outputs on their motherboard
  626. # or motherboard+discrete graphics combo.
  627.  
  628. # EVEN IF YOU ARE NOT USING THE S/PDIF OUTPUT
  629. # but still have one, you will need to uncomment the lines below !
  630.  
  631. # after uncommenting these lines, you must reboot for these settings to take effect
  632.  
  633. # blacklist snd_hda_codec_realtek
  634. # blacklist snd_hda_codec_sigmatel
  635. # blacklist snd_hda_codec_cirrus
  636.  
  637.  
  638. ################################################################################
  639. # ... output of cat /storage/.config/autostart.sh
  640. # LibreELEC release: RPi4.arm-9.2.8
  641. #
  642. ################################################################################
  643. (
  644. /usr/bin/bash /storage/.config/mecool.sh
  645. )&
  646. ################################################################################
  647. # ... output of cat /storage/.config/shutdown.sh
  648. # LibreELEC release: RPi4.arm-9.2.8
  649. #
  650. ################################################################################
  651. #!/bin/bash
  652. case "$1" in
  653. halt)
  654. /usr/bin/python /storage/.config/argononed-poweroff.py
  655. ;;
  656. poweroff)
  657. /usr/bin/python /storage/.config/argononed-poweroff.py
  658. ;;
  659. reboot)
  660. #
  661. ;;
  662. *)
  663. # your commands here
  664. ;;
  665. esac
  666. # Kindly add the following lines under the "halt" and "poweroff" (remove "#" from the start)
  667. # /usr/bin/python /storage/.config/argononed-poweroff.py
  668. # Kindly add the following lines under the "halt" and "poweroff" (remove "#" from the start)
  669. # /usr/bin/python /storage/.config/argononed-poweroff.py
  670. # Kindly add the following lines under the "halt" and "poweroff" (remove "#" from the start)
  671. # /usr/bin/python /storage/.config/argononed-poweroff.py
  672. # Kindly add the following lines under the "halt" and "poweroff" (remove "#" from the start)
  673. # /usr/bin/python /storage/.config/argononed-poweroff.py
  674.  
  675. ################################################################################
  676. # ... output of ls -laR /storage/.config/system.d
  677. # LibreELEC release: RPi4.arm-9.2.8
  678. #
  679. ################################################################################
  680. /storage/.config/system.d:
  681. total 40
  682. drwxr-xr-x 3 root root 1024 Jul 6 20:10 .
  683. drwxr-xr-x 19 root root 1024 Apr 11 2019 ..
  684. -rw-r--r-- 1 root root 28816 Nov 23 2019 README
  685. -rw-r--r-- 1 root root 227 Jun 10 14:42 argononed.service
  686. -rw-r--r-- 1 root root 1772 Jul 6 20:10 cifs.mount.sample
  687. drwxr-xr-x 2 root root 1024 Apr 11 2019 multi-user.target.wants
  688. -rw-r--r-- 1 root root 1729 Jul 6 20:10 nfs.mount.sample
  689. -rw-r--r-- 1 root root 1145 Jul 6 20:10 openvpn.service.sample
  690. -rw-r--r-- 1 root root 421 Jul 6 20:10 wireguard.service.sample
  691.  
  692. /storage/.config/system.d/multi-user.target.wants:
  693. total 2
  694. drwxr-xr-x 2 root root 1024 Apr 11 2019 .
  695. drwxr-xr-x 3 root root 1024 Jul 6 20:10 ..
  696. lrwxrwxrwx 1 root root 43 Apr 11 2019 argononed.service -> /storage/.config/system.d/argononed.service
  697.  
  698. ################################################################################
  699. # ... output of cat /storage/.config/system.d/argononed.service
  700. # LibreELEC release: RPi4.arm-9.2.8
  701. #
  702. ################################################################################
  703. [Unit]
  704. Description=Argon One Fan and Button Service
  705. After=multi-user.target
  706. [Service]
  707. Type=simple
  708. Restart=always
  709. RemainAfterExit=true
  710. ExecStart=/usr/bin/python /storage/.config/argononed.py
  711. [Install]
  712. WantedBy=multi-user.target
  713.  
  714.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!