Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- chris@chris-desktop:~$ dmesg
- [ 0.000000] Linux version 4.9.33-rt22 (chris@chris-desktop) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT RT Wed Jun 28 21:31:03 SAST 2017
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
- [ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
- [ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
- [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
- [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x000000005b518fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000005b519000-0x000000005d5fdfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000005d5fe000-0x000000005d6cefff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000005d6cf000-0x000000005d9f3fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000005d9f4000-0x000000005ddf1fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000005ddf2000-0x000000005e165fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000005e166000-0x000000005e166fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000005e167000-0x000000005e180fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000005e181000-0x000000005e756fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000005e757000-0x000000005e758fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000005e759000-0x000000005effffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x000000007fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 3.0 present.
- [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./J3355B-ITX, BIOS P1.10 09/09/2016
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-6FFFF write-back
- [ 0.000000] 70000-7FFFF uncachable
- [ 0.000000] 80000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7FC0000000 write-back
- [ 0.000000] 1 base 0040000000 mask 7FE0000000 write-back
- [ 0.000000] 2 base 005F000000 mask 7FFF000000 uncachable
- [ 0.000000] 3 base 0100000000 mask 7F80000000 write-back
- [ 0.000000] 4 base 00FF800000 mask 7FFF800000 write-combining
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] found SMP MP-table at [mem 0x000fcb50-0x000fcb5f] mapped at [c00fcb50]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x043fffff]
- [ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
- [ 0.000000] BRK [0x03e6f000, 0x03e6ffff] PGTABLE
- [ 0.000000] BRK [0x03e70000, 0x03e70fff] PGTABLE
- [ 0.000000] BRK [0x03e71000, 0x03e71fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x33690000-0x35b3ffff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 0x000000005D9D70B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 0x000000005D9E0460 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 0x000000005D9D7230 009229 (v02 ALASKA A M I 01072009 INTL 20120913)
- [ 0.000000] ACPI: FACS 0x000000005D9F3080 000040
- [ 0.000000] ACPI: FPDT 0x000000005D9E0580 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FIDT 0x000000005D9E05D0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: MCFG 0x000000005D9E0670 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.000000] ACPI: DBG2 0x000000005D9E06B0 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: DBGP 0x000000005D9E0730 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: HPET 0x000000005D9E0770 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: LPIT 0x000000005D9E07B0 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: APIC 0x000000005D9E0810 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: NPKT 0x000000005D9E08A0 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: PRAM 0x000000005D9E0910 000030 (v01 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: WSMT 0x000000005D9E0940 000028 (v00 INTEL EDK2 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: SSDT 0x000000005D9E0970 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)
- [ 0.000000] ACPI: SSDT 0x000000005D9E14D0 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)
- [ 0.000000] ACPI: AAFT 0x000000005D9E2BC0 0002AE (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 0x000000005D9E2E70 000529 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
- [ 0.000000] ACPI: SSDT 0x000000005D9E33A0 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
- [ 0.000000] ACPI: SSDT 0x000000005D9E3AD0 00032D (v02 PmRef Cpu0Tst 00003000 INTL 20120913)
- [ 0.000000] ACPI: SSDT 0x000000005D9E3E00 00017C (v02 PmRef ApTst 00003000 INTL 20120913)
- [ 0.000000] ACPI: SSDT 0x000000005D9E3F80 002760 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
- [ 0.000000] ACPI: UEFI 0x000000005D9E66E0 000042 (v01 ALASKA A M I 00000000 00000000)
- [ 0.000000] ACPI: WDAT 0x000000005D9E6730 000104 (v01 00000000 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 5252MB HIGHMEM available.
- [ 0.000000] 891MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 37bfe000
- [ 0.000000] low ram: 0 - 37bfe000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
- [ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000017fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
- [ 0.000000] node 0: [mem 0x0000000012151000-0x000000005b518fff]
- [ 0.000000] node 0: [mem 0x000000005d5fe000-0x000000005d6cefff]
- [ 0.000000] node 0: [mem 0x000000005ddf2000-0x000000005e165fff]
- [ 0.000000] node 0: [mem 0x000000005e181000-0x000000005e756fff]
- [ 0.000000] node 0: [mem 0x000000005e759000-0x000000005effffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
- [ 0.000000] On node 0 totalpages: 894500
- [ 0.000000] DMA zone: 40 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3994 pages, LIFO batch:0
- [ 0.000000] Normal zone: 2190 pages used for memmap
- [ 0.000000] Normal zone: 215725 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 674781 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] Reserving Intel graphics memory at 0x0000000060000000-0x000000007fffffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
- [ 0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] percpu: Embedded 22 pages/cpu @f5da3000 s57568 r0 d32544 u90112
- [ 0.000000] pcpu-alloc: s57568 r0 d32544 u90112 alloc=22*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 892270
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.33-rt22 root=UUID=1d5e521b-aea4-4601-879f-89ffcce786be ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (00037bfe:00180000)
- [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
- [ 0.000000] Memory: 3488056K/3578000K available (8394K kernel code, 860K rwdata, 3396K rodata, 956K init, 988K bss, 89944K reserved, 0K cma-reserved, 2699124K highmem)
- [ 0.000000] virtual kernel memory layout:
- fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
- pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- .init : 0xc3c5f000 - 0xc3d4e000 ( 956 kB)
- .data : 0xc3832beb - 0xc3c5d200 (4265 kB)
- .text : 0xc3000000 - 0xc3832beb (8394 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:2304 nr_irqs:1024 16
- [ 0.000000] CPU 0 irqstacks, hard=f2c80000 soft=f2c82000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 3670016 bytes of page_ext
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
- [ 0.000000] tsc: Detected 1996.914 MHz processor
- [ 0.000082] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200)
- [ 0.000084] pid_max: default: 32768 minimum: 301
- [ 0.000118] ACPI: Core revision 20160831
- [ 0.010191] ACPI: 8 ACPI AML tables successfully acquired and loaded
- [ 0.010241] Security Framework initialized
- [ 0.010243] Yama: becoming mindful.
- [ 0.010254] AppArmor: AppArmor initialized
- [ 0.010322] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.010324] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.010690] CPU: Physical Processor ID: 0
- [ 0.010691] CPU: Processor Core ID: 0
- [ 0.010712] mce: CPU supports 7 MCE banks
- [ 0.010764] CPU0: Thermal monitoring enabled (TM1)
- [ 0.010853] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
- [ 0.010854] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
- [ 0.014388] Freeing SMP alternatives memory: 28K (c3d4e000 - c3d55000)
- [ 0.019527] ftrace: allocating 32508 entries in 64 pages
- [ 0.078856] smpboot: Max logical packages: 2
- [ 0.078864] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.083388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.123089] TSC deadline timer enabled
- [ 0.123096] smpboot: CPU0: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (family: 0x6, model: 0x5c, stepping: 0x9)
- [ 0.123104] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
- [ 0.123128] ... version: 4
- [ 0.123129] ... bit width: 48
- [ 0.123130] ... generic registers: 4
- [ 0.123131] ... value mask: 0000ffffffffffff
- [ 0.123132] ... max period: 00007fffffffffff
- [ 0.123133] ... fixed-purpose events: 3
- [ 0.123134] ... event mask: 000000070000000f
- [ 0.179410] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.231309] CPU 2 irqstacks, hard=f25b4000 soft=f25b6000
- [ 0.231312] .... node #0, CPUs: #2
- [ 0.231512] Initializing CPU#2
- [ 0.313598] x86: Booted up 1 node, 2 CPUs
- [ 0.313602] smpboot: Total of 2 processors activated (7992.91 BogoMIPS)
- [ 0.315048] devtmpfs: initialized
- [ 0.315614] evm: security.selinux
- [ 0.315616] evm: security.SMACK64
- [ 0.315616] evm: security.SMACK64EXEC
- [ 0.315617] evm: security.SMACK64TRANSMUTE
- [ 0.315618] evm: security.SMACK64MMAP
- [ 0.315620] evm: security.ima
- [ 0.315621] evm: security.capability
- [ 0.315745] PM: Registering ACPI NVS region [mem 0x5d6cf000-0x5d9f3fff] (3297280 bytes)
- [ 0.315823] PM: Registering ACPI NVS region [mem 0x5e166000-0x5e166fff] (4096 bytes)
- [ 0.315929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.315935] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.316024] pinctrl core: initialized pinctrl subsystem
- [ 0.316307] RTC time: 16:10:10, date: 06/29/17
- [ 0.316546] NET: Registered protocol family 16
- [ 0.316922] EISA bus registered
- [ 0.316994] cpuidle: using governor ladder
- [ 0.317003] cpuidle: using governor menu
- [ 0.317005] PCCT header not found.
- [ 0.317105] ACPI: bus type PCI registered
- [ 0.317108] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.317199] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.317203] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.317204] PCI: Using MMCONFIG for extended config space
- [ 0.317206] PCI: Using configuration type 1 for base access
- [ 0.317372] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.317373] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.317374] mtrr: corrected configuration.
- [ 0.319731] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.320164] ACPI: Added _OSI(Module Device)
- [ 0.320166] ACPI: Added _OSI(Processor Device)
- [ 0.320167] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.320169] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.320866] ACPI: Executed 3 blocks of module-level executable AML code
- [ 0.331037] ACPI: Dynamic OEM Table Load:
- [ 0.331048] ACPI: SSDT 0x00000000F2671E00 00015F (v02 PmRef ApIst 00003000 INTL 20120913)
- [ 0.332766] ACPI: Interpreter enabled
- [ 0.332802] ACPI: (supports S0 S4 S5)
- [ 0.332804] ACPI: Using IOAPIC for interrupt routing
- [ 0.332908] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.350854] ACPI: Power Resource [FN00] (on)
- [ 0.352129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.352138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.353146] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.354171] PCI host bridge to bus 0000:00
- [ 0.354175] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
- [ 0.354178] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
- [ 0.354180] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
- [ 0.354182] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.354184] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.354187] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.354189] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
- [ 0.354191] pci_bus 0000:00: root bus resource [mem 0x60000001-0x7fffffff window]
- [ 0.354193] pci_bus 0000:00: root bus resource [mem 0x5f800001-0x5fffffff window]
- [ 0.354195] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
- [ 0.354197] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
- [ 0.354202] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.354220] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
- [ 0.354640] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
- [ 0.354657] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
- [ 0.354668] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
- [ 0.354677] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 0.355109] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
- [ 0.355146] pci 0000:00:0f.0: reg 0x10: [mem 0x91117000-0x91117fff 64bit]
- [ 0.355274] pci 0000:00:0f.0: PME# supported from D3hot
- [ 0.355645] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
- [ 0.355664] pci 0000:00:12.0: reg 0x10: [mem 0x91110000-0x91111fff]
- [ 0.355674] pci 0000:00:12.0: reg 0x14: [mem 0x91114000-0x911140ff]
- [ 0.355684] pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
- [ 0.355693] pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
- [ 0.355702] pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
- [ 0.355712] pci 0000:00:12.0: reg 0x24: [mem 0x91113000-0x911137ff]
- [ 0.355760] pci 0000:00:12.0: PME# supported from D3hot
- [ 0.356085] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
- [ 0.356174] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
- [ 0.356438] pci 0000:00:13.0: System wakeup disabled by ACPI
- [ 0.356512] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
- [ 0.356600] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
- [ 0.356862] pci 0000:00:13.2: System wakeup disabled by ACPI
- [ 0.356949] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
- [ 0.356973] pci 0000:00:15.0: reg 0x10: [mem 0x91100000-0x9110ffff 64bit]
- [ 0.357054] pci 0000:00:15.0: PME# supported from D3hot D3cold
- [ 0.357326] pci 0000:00:15.0: System wakeup disabled by ACPI
- [ 0.357456] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
- [ 0.357905] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
- [ 0.357961] pci 0000:00:1f.1: reg 0x10: [mem 0x91112000-0x911120ff 64bit]
- [ 0.358040] pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
- [ 0.358509] pci 0000:00:13.0: PCI bridge to [bus 01]
- [ 0.358628] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.358655] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
- [ 0.358691] pci 0000:02:00.0: reg 0x18: [mem 0x91004000-0x91004fff 64bit]
- [ 0.358715] pci 0000:02:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref]
- [ 0.358737] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
- [ 0.358841] pci 0000:02:00.0: supports D1 D2
- [ 0.358843] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.358912] pci 0000:02:00.0: System wakeup disabled by ACPI
- [ 0.367546] pci 0000:00:13.2: PCI bridge to [bus 02]
- [ 0.367552] pci 0000:00:13.2: bridge window [io 0xe000-0xefff]
- [ 0.367557] pci 0000:00:13.2: bridge window [mem 0x91000000-0x910fffff]
- [ 0.367576] pci_bus 0000:00: on NUMA node 0
- [ 0.369587] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.369687] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.369790] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.369886] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.369982] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.370078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.370182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.370279] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
- [ 0.371402] ACPI: Enabled 7 GPEs in block 00 to 7F
- [ 0.371724] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 0.371727] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.371732] vgaarb: loaded
- [ 0.371734] vgaarb: bridge control possible 0000:00:02.0
- [ 0.372078] SCSI subsystem initialized
- [ 0.372181] libata version 3.00 loaded.
- [ 0.372219] ACPI: bus type USB registered
- [ 0.372249] usbcore: registered new interface driver usbfs
- [ 0.372265] usbcore: registered new interface driver hub
- [ 0.372289] usbcore: registered new device driver usb
- [ 0.372538] PCI: Using ACPI for IRQ routing
- [ 0.401044] PCI: pci_cache_line_size set to 64 bytes
- [ 0.401104] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
- [ 0.401107] e820: reserve RAM buffer [mem 0x5b519000-0x5bffffff]
- [ 0.401109] e820: reserve RAM buffer [mem 0x5d6cf000-0x5fffffff]
- [ 0.401111] e820: reserve RAM buffer [mem 0x5e166000-0x5fffffff]
- [ 0.401113] e820: reserve RAM buffer [mem 0x5e757000-0x5fffffff]
- [ 0.401115] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
- [ 0.401308] NetLabel: Initializing
- [ 0.401310] NetLabel: domain hash size = 128
- [ 0.401311] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.401331] NetLabel: unlabeled traffic allowed by default
- [ 0.401594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.401608] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
- [ 0.403693] clocksource: Switched to clocksource hpet
- [ 0.429044] VFS: Disk quotas dquot_6.6.0
- [ 0.429073] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.429231] AppArmor: AppArmor Filesystem Enabled
- [ 0.429328] pnp: PnP ACPI init
- [ 0.429752] system 00:00: [io 0x0280-0x028f] has been reserved
- [ 0.429755] system 00:00: [io 0x0290-0x029f] has been reserved
- [ 0.429758] system 00:00: [io 0x02a0-0x02af] has been reserved
- [ 0.429765] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.430350] pnp 00:01: [dma 0 disabled]
- [ 0.430565] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.431113] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.432009] system 00:03: [io 0x0680-0x069f] has been reserved
- [ 0.432012] system 00:03: [io 0x0400-0x047f] has been reserved
- [ 0.432015] system 00:03: [io 0x0500-0x05fe] has been reserved
- [ 0.432021] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.432519] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.432523] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved
- [ 0.432526] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
- [ 0.432529] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
- [ 0.432531] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved
- [ 0.432534] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved
- [ 0.432537] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved
- [ 0.432540] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
- [ 0.432543] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.432548] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.432765] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.432966] pnp: PnP ACPI: found 6 devices
- [ 0.432970] PnPBIOS: Disabled by ACPI PNP
- [ 0.475824] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.475853] pci 0000:00:13.0: PCI bridge to [bus 01]
- [ 0.475867] pci 0000:00:13.2: PCI bridge to [bus 02]
- [ 0.475871] pci 0000:00:13.2: bridge window [io 0xe000-0xefff]
- [ 0.475876] pci 0000:00:13.2: bridge window [mem 0x91000000-0x910fffff]
- [ 0.475886] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
- [ 0.475889] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
- [ 0.475891] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
- [ 0.475893] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
- [ 0.475896] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
- [ 0.475898] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
- [ 0.475900] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
- [ 0.475903] pci_bus 0000:00: resource 11 [mem 0x60000001-0x7fffffff window]
- [ 0.475905] pci_bus 0000:00: resource 12 [mem 0x5f800001-0x5fffffff window]
- [ 0.475907] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
- [ 0.475909] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
- [ 0.475912] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.475914] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
- [ 0.476099] NET: Registered protocol family 2
- [ 0.476445] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.476480] TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
- [ 0.476583] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.476614] UDP hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.476632] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.476729] NET: Registered protocol family 1
- [ 0.476756] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.477268] PCI: CLS 0 bytes, default 64
- [ 0.477382] Unpacking initramfs...
- [ 1.510868] Freeing initrd memory: 37568K (f3690000 - f5b40000)
- [ 1.511105] Scanning for low memory corruption every 60 seconds
- [ 1.511921] audit: initializing netlink subsys (disabled)
- [ 1.511945] audit: type=2000 audit(1498752611.471:1): initialized
- [ 1.512425] Initialise system trusted keyrings
- [ 1.512617] workingset: timestamp_bits=14 max_order=20 bucket_order=6
- [ 1.515632] zbud: loaded
- [ 1.516359] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.516709] fuse init (API version 7.26)
- [ 1.516999] Allocating IMA blacklist keyring.
- [ 1.520252] Key type asymmetric registered
- [ 1.520254] Asymmetric key parser 'x509' registered
- [ 1.520290] bounce: pool size: 64 pages
- [ 1.520349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 1.520434] io scheduler noop registered
- [ 1.520436] io scheduler deadline registered (default)
- [ 1.520498] io scheduler cfq registered
- [ 1.521565] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
- [ 1.521571] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded
- [ 1.521677] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
- [ 1.521680] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- [ 1.521686] pcie_pme 0000:00:13.2:pcie001: service driver pcie_pme loaded
- [ 1.521704] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.521712] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.521770] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
- [ 1.521771] vesafb: scrolling: redraw
- [ 1.521774] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 1.521802] vesafb: framebuffer at 0x80000000, mapped to 0xf8600000, using 8128k, total 8128k
- [ 1.750326] Console: switching to colour frame buffer device 240x67
- [ 1.976657] fb0: VESA VGA frame buffer device
- [ 1.976729] intel_idle: MWAIT substates: 0x11242020
- [ 1.976731] intel_idle: v0.4.1 model 0x5C
- [ 1.976941] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 1.977132] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 1.977138] ACPI: Power Button [PWRB]
- [ 1.984799] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.984802] ACPI: Thermal Zone [TZ01] (37 C)
- [ 1.984860] GHES: HEST is not enabled!
- [ 1.984882] isapnp: Scanning for PnP cards...
- [ 2.299864] isapnp: No Plug & Play device found
- [ 2.300052] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 2.302914] Linux agpgart interface v0.103
- [ 2.339633] loop: module loaded
- [ 2.340066] libphy: Fixed MDIO Bus: probed
- [ 2.340068] tun: Universal TUN/TAP device driver, 1.6
- [ 2.340069] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.340137] PPP generic driver version 2.4.2
- [ 2.340212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.340218] ehci-pci: EHCI PCI platform driver
- [ 2.340239] ehci-platform: EHCI generic platform driver
- [ 2.340261] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.340266] ohci-pci: OHCI PCI platform driver
- [ 2.340283] ohci-platform: OHCI generic platform driver
- [ 2.340300] uhci_hcd: USB Universal Host Controller Interface driver
- [ 2.340668] xhci_hcd 0000:00:15.0: xHCI Host Controller
- [ 2.340678] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
- [ 2.341791] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
- [ 2.341798] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
- [ 2.342256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.342261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.342263] usb usb1: Product: xHCI Host Controller
- [ 2.342266] usb usb1: Manufacturer: Linux 4.9.33-rt22 xhci-hcd
- [ 2.342267] usb usb1: SerialNumber: 0000:00:15.0
- [ 2.342557] hub 1-0:1.0: USB hub found
- [ 2.342577] hub 1-0:1.0: 8 ports detected
- [ 2.344022] xhci_hcd 0000:00:15.0: xHCI Host Controller
- [ 2.344029] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
- [ 2.344100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.344103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.344105] usb usb2: Product: xHCI Host Controller
- [ 2.344107] usb usb2: Manufacturer: Linux 4.9.33-rt22 xhci-hcd
- [ 2.344109] usb usb2: SerialNumber: 0000:00:15.0
- [ 2.344305] hub 2-0:1.0: USB hub found
- [ 2.344323] hub 2-0:1.0: 7 ports detected
- [ 2.345561] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 2.349875] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.349984] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.350205] mousedev: PS/2 mouse device common for all mice
- [ 2.350452] rtc_cmos 00:05: RTC can wake from S4
- [ 2.350915] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 2.351276] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 2.351299] i2c /dev entries driver
- [ 2.351480] device-mapper: uevent: version 1.0.3
- [ 2.351652] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
- [ 2.351777] platform eisa.0: Probing EISA bus 0
- [ 2.351781] platform eisa.0: EISA: Cannot allocate resource for mainboard
- [ 2.351784] platform eisa.0: Cannot allocate resource for EISA slot 1
- [ 2.351786] platform eisa.0: Cannot allocate resource for EISA slot 2
- [ 2.351788] platform eisa.0: Cannot allocate resource for EISA slot 3
- [ 2.351790] platform eisa.0: Cannot allocate resource for EISA slot 4
- [ 2.351793] platform eisa.0: Cannot allocate resource for EISA slot 5
- [ 2.351795] platform eisa.0: Cannot allocate resource for EISA slot 6
- [ 2.351797] platform eisa.0: Cannot allocate resource for EISA slot 7
- [ 2.351799] platform eisa.0: Cannot allocate resource for EISA slot 8
- [ 2.351802] platform eisa.0: EISA: Detected 0 cards
- [ 2.351810] cpufreq_nforce2: No nForce2 chipset
- [ 2.351828] intel_pstate: Intel P-state driver initializing
- [ 2.352482] NET: Registered protocol family 10
- [ 2.352920] NET: Registered protocol family 17
- [ 2.352938] Key type dns_resolver registered
- [ 2.353335] microcode: sig=0x506c9, pf=0x1, revision=0x1c
- [ 2.353396] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 2.353403] Using IPI No-Shortcut mode
- [ 2.353603] registered taskstats version 1
- [ 2.353608] Loading compiled-in X.509 certificates
- [ 2.361431] Loaded X.509 cert 'Build time autogenerated kernel key: 6d92f5bd7de4e481404e7911a03fac093681afe9'
- [ 2.361487] zswap: loaded using pool lzo/zbud
- [ 2.385172] Key type big_key registered
- [ 2.389078] Key type trusted registered
- [ 2.393888] Key type encrypted registered
- [ 2.393897] AppArmor: AppArmor sha1 policy hashing enabled
- [ 2.393900] ima: No TPM chip found, activating TPM-bypass!
- [ 2.393961] evm: HMAC attrs: 0x1
- [ 2.394245] Magic number: 5:493:187
- [ 2.394304] acpi device:46: hash matches
- [ 2.394546] rtc_cmos 00:05: setting system clock to 2017-06-29 16:10:12 UTC (1498752612)
- [ 2.394731] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 2.394732] EDD information not available.
- [ 2.394869] PM: Hibernation image not present or could not be loaded.
- [ 2.395430] Freeing unused kernel memory: 956K (c3c5f000 - c3d4e000)
- [ 2.395559] Write protecting the kernel text: 8396k
- [ 2.395938] Write protecting the kernel read-only data: 3404k
- [ 2.395939] NX-protecting the kernel data: 5940k
- [ 2.396338] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 2.421678] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.421834] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.422847] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.423439] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.425454] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.425571] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.426296] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.426418] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.426555] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.426676] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 2.519610] ahci 0000:00:12.0: version 3.0
- [ 2.531758] tsc: Refined TSC clocksource calibration: 1996.799 MHz
- [ 2.531773] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bc5adef, max_idle_ns: 881590438240 ns
- [ 2.555462] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 2.555477] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
- [ 2.571772] scsi host0: ahci
- [ 2.579800] scsi host1: ahci
- [ 2.579912] ata1: SATA max UDMA/133 abar m2048@0x91113000 port 0x91113100 irq 123
- [ 2.579915] ata2: SATA max UDMA/133 abar m2048@0x91113000 port 0x91113180 irq 123
- [ 2.600700] [drm] Initialized
- [ 2.604472] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
- [ 2.674386] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.675747] usb 1-2: new low-speed USB device number 2 using xhci_hcd
- [ 2.695087] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 2.704812] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf8456000, 70:85:c2:2f:3d:41, XID 0c000800 IRQ 369
- [ 2.704816] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 2.728367] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 2.802556] [drm] Memory usable by graphics device = 2048M
- [ 2.802561] checking generic (80000000 7f0000) vs hw (80000000 10000000)
- [ 2.802562] fb: switching to inteldrmfb from VESA VGA
- [ 2.802779] Console: switching to colour dummy device 80x25
- [ 2.802910] [drm] Replacing VGA console driver
- [ 2.803064] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.803065] [drm] Driver supports precise vblank timestamp query.
- [ 2.805528] [drm] Finished loading i915/bxt_dmc_ver1_07.bin (v1.7)
- [ 2.806571] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 2.826364] usb 1-2: New USB device found, idVendor=0603, idProduct=00f2
- [ 2.826368] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.826370] usb 1-2: Product: USB Keyboard
- [ 2.826372] usb 1-2: Manufacturer: NOVATEK
- [ 2.947877] usb 1-3: new full-speed USB device number 3 using xhci_hcd
- [ 3.055893] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.057170] ata1.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7
- [ 3.057174] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.058730] ata1.00: configured for UDMA/133
- [ 3.059883] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.060896] ata2.00: ATA-9: SanDisk SSD U110 32GB, U221000, max UDMA/133
- [ 3.060900] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
- [ 3.062826] ata2.00: configured for UDMA/133
- [ 3.063067] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ 0-07 PQ: 0 ANSI: 5
- [ 3.088382] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 3.088498] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.088500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.088550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.088855] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 3.089707] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD U110 000 PQ: 0 ANSI: 5
- [ 3.090066] usb 1-3: New USB device found, idVendor=0eef, idProduct=7224
- [ 3.090071] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.090073] usb 1-3: Product: USB TouchController
- [ 3.090075] usb 1-3: Manufacturer: eGalax Inc.
- [ 3.095451] sda: sda1
- [ 3.096111] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.120244] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 3.120351] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
- [ 3.120519] sd 1:0:0:0: [sdb] Write Protect is off
- [ 3.120521] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 3.120572] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.122692] sdb: sdb1 sdb2 < sdb5 >
- [ 3.123464] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 3.207753] usb 1-4: new high-speed USB device number 4 using xhci_hcd
- [ 3.365836] usb 1-4: New USB device found, idVendor=07d1, idProduct=3c16
- [ 3.365851] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.365853] usb 1-4: Product: 11n Adapter
- [ 3.365855] usb 1-4: Manufacturer: Ralink
- [ 3.365857] usb 1-4: SerialNumber: 1.0
- [ 3.483887] usb 1-6: new low-speed USB device number 5 using xhci_hcd
- [ 3.555886] clocksource: Switched to clocksource tsc
- [ 3.580807] random: fast init done
- [ 3.627135] usb 1-6: New USB device found, idVendor=ffc0, idProduct=0040
- [ 3.627138] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.627140] usb 1-6: Product: USB Laser Mouse
- [ 3.627142] usb 1-6: Manufacturer: Mouse
- [ 3.646632] usbcore: registered new interface driver usbhid
- [ 3.646635] usbhid: USB HID core driver
- [ 3.657791] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:0603:00F2.0001/input/input4
- [ 3.715976] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:15.0-2/input0
- [ 3.717390] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:0603:00F2.0002/input/input5
- [ 3.776603] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:15.0-2/input1
- [ 3.776795] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.0/0003:FFC0:0040.0004/input/input6
- [ 3.777251] hid-generic 0003:FFC0:0040.0004: input,hidraw2: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:15.0-6/input0
- [ 3.815048] [drm] failed to retrieve link info, disabling eDP
- [ 3.816964] [drm] GuC firmware load skipped
- [ 3.834076] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 3.834884] acpi device:10: registered as cooling_device3
- [ 3.834972] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
- [ 3.835165] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
- [ 4.082360] fbcon: inteldrmfb (fb0) is primary device
- [ 4.271599] Console: switching to colour frame buffer device 240x67
- [ 4.313380] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 4.402449] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.700239] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 4.700487] systemd[1]: Detected architecture x86.
- [ 4.701044] systemd[1]: Set hostname to <chris-desktop>.
- [ 4.868011] [drm] RC6 on
- [ 4.886370] systemd[1]: Listening on Journal Audit Socket.
- [ 4.886537] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 4.886745] systemd[1]: Created slice System Slice.
- [ 4.887071] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 4.887138] systemd[1]: Listening on Syslog Socket.
- [ 4.887219] systemd[1]: Listening on udev Control Socket.
- [ 4.887237] systemd[1]: Reached target User and Group Name Lookups.
- [ 4.907770] NOHZ: local_softirq_pending 80
- [ 4.997226] lp: driver loaded but no devices found
- [ 5.014944] ppdev: user-space parallel port driver
- [ 5.028068] parport_pc 00:01: reported by Plug and Play ACPI
- [ 5.028171] parport0: PC-style at 0x378, irq 5 [PCSPP]
- [ 5.132023] lp0: using parport0 (interrupt-driven).
- [ 5.165028] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
- [ 5.290574] systemd-journald[237]: Received request to flush runtime journal from PID 1
- [ 5.656476] audit: type=1400 audit(1498752615.757:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=406 comm="apparmor_parser"
- [ 5.656487] audit: type=1400 audit(1498752615.757:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser"
- [ 5.656492] audit: type=1400 audit(1498752615.757:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=406 comm="apparmor_parser"
- [ 5.656497] audit: type=1400 audit(1498752615.757:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser"
- [ 5.661740] audit: type=1400 audit(1498752615.761:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=409 comm="apparmor_parser"
- [ 5.661824] audit: type=1400 audit(1498752615.761:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=409 comm="apparmor_parser"
- [ 5.679142] audit: type=1400 audit(1498752615.777:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=410 comm="apparmor_parser"
- [ 5.679221] audit: type=1400 audit(1498752615.777:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=410 comm="apparmor_parser"
- [ 5.679300] audit: type=1400 audit(1498752615.777:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=410 comm="apparmor_parser"
- [ 6.475102] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 7.393408] random: crng init done
- [ 7.732961] input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3:1.0/0003:0EEF:7224.0003/input/input8
- [ 7.748166] input: eGalax Inc. USB TouchController Pen as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3:1.0/0003:0EEF:7224.0003/input/input9
- [ 7.764326] hid-multitouch 0003:0EEF:7224.0003: input,hiddev0,hidraw3: USB HID v2.10 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:15.0-3/input0
- [ 7.958214] Adding 3574780k swap on /dev/sdb5. Priority:-1 extents:1 across:3574780k SSFS
- [ 8.059932] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
- [ 8.059936] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 8.059938] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 8.059939] RAPL PMU: hw unit of domain dram 2^-14 Joules
- [ 8.059939] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 8.872448] kvm: disabled by bios
- [ 8.962945] kvm: disabled by bios
- [ 9.107606] intel_rapl: Found RAPL domain package
- [ 9.107611] intel_rapl: Found RAPL domain core
- [ 9.107614] intel_rapl: Found RAPL domain uncore
- [ 9.107617] intel_rapl: Found RAPL domain dram
- [ 9.231929] usb 1-4: reset high-speed USB device number 4 using xhci_hcd
- [ 9.251121] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 9.302258] r8169 0000:02:00.0 enp2s0: link down
- [ 9.302420] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 9.382480] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
- [ 9.396892] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
- [ 9.442137] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 9.496646] usbcore: registered new interface driver rt2800usb
- [ 9.949889] rt2800usb 1-4:1.0 wlx3408049371fa: renamed from wlan0
- [ 10.013416] IPv6: ADDRCONF(NETDEV_UP): wlx3408049371fa: link is not ready
- [ 10.013506] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 10.014269] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
- [ 10.319785] IPv6: ADDRCONF(NETDEV_UP): wlx3408049371fa: link is not ready
- [ 10.400100] IPv6: ADDRCONF(NETDEV_UP): wlx3408049371fa: link is not ready
- [ 13.353252] wlx3408049371fa: authenticate with 18:d6:c7:ac:52:21
- [ 13.415866] wlx3408049371fa: send auth to 18:d6:c7:ac:52:21 (try 1/3)
- [ 13.416852] wlx3408049371fa: authenticated
- [ 13.417848] wlx3408049371fa: associating with AP with corrupt probe response
- [ 13.419737] wlx3408049371fa: associate with 18:d6:c7:ac:52:21 (try 1/3)
- [ 13.421822] wlx3408049371fa: RX AssocResp from 18:d6:c7:ac:52:21 (capab=0x431 status=0 aid=1)
- [ 13.427475] wlx3408049371fa: associated
- [ 13.427553] IPv6: ADDRCONF(NETDEV_CHANGE): wlx3408049371fa: link becomes ready
- [ 568.343318] perf: interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
- [ 743.476317] perf: interrupt took too long (3146 > 3145), lowering kernel.perf_event_max_sample_rate to 63500
- [ 968.647316] perf: interrupt took too long (4091 > 3932), lowering kernel.perf_event_max_sample_rate to 48750
- [ 1136.547182] NOHZ: local_softirq_pending 80
- [ 1136.647148] NOHZ: local_softirq_pending 80
- [ 1136.647174] NOHZ: local_softirq_pending 80
- chris@chris-desktop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement