Project_10660_Code

#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x27,16,2);

#define SEALEVELPRESSURE_HPA (1013.25)

Adafruit_BME280 bme;

void setup() {
  Serial.begin(9600);
  lcd.init();
  lcd.init();
  lcd.backlight();

  if (!bme.begin(0x76)) {
    Serial.println("Could not find a valid BME280 sensor, check wiring!");
    while (1);
  }
}

void loop() {
  Serial.print("Temp:");
  Serial.print(bme.readTemperature());
  Serial.println("*C");

  Serial.print("Hum:");
  Serial.print(bme.readHumidity());
  Serial.println("%");

  Serial.print("Pr:");
  Serial.print(bme.readPressure() / 100.0F);
  Serial.println("hPa");

  Serial.print("Alt:");
  Serial.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
  Serial.println("m");

  lcd.setCursor(0, 0);
  lcd.print("Temp:");
  lcd.print(bme.readTemperature());
  lcd.print("*C -");

  //lcd.setCursor(0, 1);
  lcd.print(" Hum:");
  lcd.print(bme.readHumidity());
  lcd.print("%");

  lcd.setCursor(0, 1);
  lcd.print("Pr:");
  lcd.print(bme.readPressure() / 100.0F);
  lcd.print("hPa -");

  lcd.print(" Alt:");
  lcd.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
  lcd.print("m");

  Serial.println();
  delay(1000);
  lcd.clear();
}