Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Root tmp directory created at /var/lib/lava/dispatcher/tmp/13
- start: 0 validate
- Validating that http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/initramfs.cpio.gz exists
- Using GET because HEAD is not supported properly
- Validating that http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/vmlinuz exists
- Using GET because HEAD is not supported properly
- Validating that http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/dtbs/am335x-boneblack.dtb exists
- Using GET because HEAD is not supported properly
- Validating that http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/modules.tar.gz exists
- Using GET because HEAD is not supported properly
- no device environment specified
- booti, bootm and bootz are being deprecated soon, please use 'image','uimage' or 'zimage'
- device may need manual intervention to reboot
- validate duration: 4.84
- start: 1 tftp-deploy (max 240s)
- start: 1.1 download_retry (max 240s)
- start: 1.1.1 http_download (max 240s)
- Not decompressing ramdisk as can be used compressed.
- No compression specified.
- downloading http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/initramfs.cpio.gz as /var/lib/lava/dispatcher/tmp/13/tftp-deploy-hfuJc1/initramfs.cpio.gz
- total size: 12427620 (11MB)
- progress 0% (0MB)
- progress 5% (0MB)
- progress 10% (1MB)
- progress 15% (1MB)
- progress 20% (2MB)
- progress 25% (2MB)
- progress 30% (3MB)
- progress 35% (4MB)
- progress 40% (4MB)
- progress 45% (5MB)
- progress 50% (5MB)
- progress 55% (6MB)
- progress 60% (7MB)
- progress 65% (7MB)
- progress 70% (8MB)
- progress 75% (8MB)
- progress 80% (9MB)
- progress 85% (10MB)
- progress 90% (10MB)
- progress 95% (11MB)
- progress 100% (11MB)
- 11MB downloaded in 2.71s (4.37MB/s)
- md5sum of downloaded content: 3bf700ccf5d1e932f8d69163e375c115
- sha256sum of downloaded content: d5e80d4fc9b6e69f112930ddb744caaba2869ffa22782590f7669321c08feca5
- http_download duration: 2.72
- download_retry duration: 2.72
- start: 1.2 download_retry (max 240s)
- start: 1.2.1 http_download (max 240s)
- No compression specified.
- downloading http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/vmlinuz as /var/lib/lava/dispatcher/tmp/13/tftp-deploy-hfuJc1/vmlinuz
- total size: 3187808 (3MB)
- progress 1% (0MB)
- progress 6% (0MB)
- progress 11% (0MB)
- progress 16% (0MB)
- progress 21% (0MB)
- progress 26% (0MB)
- progress 31% (0MB)
- progress 37% (1MB)
- progress 42% (1MB)
- progress 47% (1MB)
- progress 52% (1MB)
- progress 57% (1MB)
- progress 62% (1MB)
- progress 67% (2MB)
- progress 72% (2MB)
- progress 77% (2MB)
- progress 82% (2MB)
- progress 87% (2MB)
- progress 92% (2MB)
- progress 97% (2MB)
- 3MB downloaded in 2.94s (1.03MB/s)
- md5sum of downloaded content: 0f95610e9d3082b7a2a0cb8a771d7435
- sha256sum of downloaded content: 37340d10427619ca4821f51c5d780ae930d799c905f903ef5036b00187b65f0f
- http_download duration: 2.95
- download_retry duration: 2.95
- start: 1.3 download_retry (max 240s)
- start: 1.3.1 http_download (max 240s)
- No compression specified.
- downloading http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/dtbs/am335x-boneblack.dtb as /var/lib/lava/dispatcher/tmp/13/tftp-deploy-hfuJc1/am335x-boneblack.dtb
- total size: 29018 (0MB)
- progress 100% (0MB)
- 0MB downloaded in 0.60s (0.05MB/s)
- md5sum of downloaded content: 9aa1d1dec291a42be413533c8163881d
- sha256sum of downloaded content: 19559c27014bb8cccea9c1c2a62d1e7a3ded18ebfd0b6a34d276d71918dfc917
- http_download duration: 0.63
- download_retry duration: 0.65
- start: 1.4 download_retry (max 240s)
- start: 1.4.1 http_download (max 240s)
- Using gz decompression
- downloading http://snapshots.linaro.org/components/lava/standard/debian/jessie/armhf/4/modules.tar.gz as /var/lib/lava/dispatcher/tmp/13/tftp-deploy-hfuJc1/modules.tar
- total size: 32894398 (31MB)
- progress 0% (0MB)
- progress 5% (1MB)
- progress 10% (3MB)
- progress 15% (4MB)
- progress 20% (6MB)
- progress 25% (7MB)
- progress 30% (9MB)
- progress 35% (11MB)
- progress 40% (12MB)
- progress 45% (14MB)
- progress 50% (15MB)
- progress 55% (17MB)
- progress 60% (18MB)
- progress 65% (20MB)
- progress 70% (21MB)
- progress 75% (23MB)
- progress 80% (25MB)
- progress 85% (26MB)
- progress 90% (28MB)
- progress 95% (29MB)
- progress 100% (31MB)
- 31MB downloaded in 5.57s (5.63MB/s)
- md5sum of downloaded content: 1c1cb76573494822c9beb2fe8aa7d183
- sha256sum of downloaded content: 907d0fb96ffb18f7b1003ce899aeababbb7caeee3b4cebace57fd144a7bf8b1a
- http_download duration: 5.58
- download_retry duration: 5.59
- start: 1.5 prepare-tftp-overlay (max 240s)
- start: 1.5.1 extract-nfsrootfs (max 240s)
- extract-nfsrootfs duration: 0.00
- start: 1.5.2 lava-overlay (max 240s)
- [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B
- makedir: /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin
- makedir: /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/tests
- makedir: /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/results
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-case-metadata
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-background-process-stop
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-echo-ipv4
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-run-attach
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-os-build
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-set
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-vm-groups-setup-host
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-case-attach
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-runner
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-background-process-start
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-installed-packages
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-case
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-shell
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-install-packages
- Creating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-installed-packages
- Updating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-target-ip
- Updating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-target-mac
- Updating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-runner
- Updating /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/bin/lava-test-case
- start: 1.5.2.1 ssh-authorize (max 240s)
- ssh-authorize duration: 0.00
- start: 1.5.2.2 lava-vland-overlay (max 240s)
- skipped lava-vland-overlay
- lava-vland-overlay duration: 0.00
- start: 1.5.2.3 lava-multinode-overlay (max 240s)
- skipped lava-multinode-overlay
- lava-multinode-overlay duration: 0.00
- start: 1.5.2.4 test-definition (max 240s)
- Loading test definitions
- start: 1.5.2.4.1 git-repo-action (max 240s)
- Using /lava-13 at stage 0
- Fetching tests from git://git.linaro.org/qa/test-definitions.git
- Running '/usr/bin/git clone git://git.linaro.org/qa/test-definitions.git /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/0/tests/0_smoke-tests'
- Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/0/tests/0_smoke-tests/ubuntu/smoke-tests-basic.yaml
- uuid=13_1.5.2.4.1 testdef={'testdef_pattern': {'pattern': '(?P<test_case_id>.*-*)\\s+:\\s+(?P<result>(PASS|pass|FAIL|fail|SKIP|skip|UNKNOWN|unknown))', 'fixupdict': {'FAIL': 'fail', 'SKIP': 'skip', 'UNKNOWN': 'unknown', 'PASS': 'pass'}}}
- git-repo-action duration: 1.60
- case: git-repo-action
- definition: lava
- result: pass
- level: 1.5.2.4.1
- extra: ...
- start: 1.5.2.4.2 test-overlay (max 240s)
- test-overlay duration: 0.01
- case: test-overlay
- definition: lava
- result: pass
- level: 1.5.2.4.2
- extra: ...
- start: 1.5.2.4.3 test-install-overlay (max 240s)
- test-install-overlay duration: 0.01
- case: test-install-overlay
- definition: lava
- result: pass
- level: 1.5.2.4.3
- extra: ...
- start: 1.5.2.4.4 test-runscript-overlay (max 240s)
- runner path: /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/0/tests/0_smoke-tests test_uuid 13_1.5.2.4.1
- test-runscript-overlay duration: 0.01
- case: test-runscript-overlay
- definition: lava
- result: pass
- level: 1.5.2.4.4
- extra: ...
- lava-test-runner.conf name smoke-tests stage 0
- Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/13/lava-overlay-8Qvi1B/lava-13/0
- Writing to runner_conf test-definition 0
- test-definition duration: 1.65
- start: 1.5.2.5 compress-overlay (max 240s)
- compress-overlay duration: 2.63
- start: 1.5.2.6 persistent-nfs-overlay (max 240s)
- persistent-nfs-overlay duration: 0.00
- lava-overlay duration: 4.30
- start: 1.5.3 extract-overlay-ramdisk (max 240s)
- nice cpio -iud -F /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk.cpio
- command output 61218 blocks
- extract-overlay-ramdisk duration: 0.41
- start: 1.5.4 extract-modules (max 240s)
- extracting modules file /var/lib/lava/dispatcher/tmp/13/tftp-deploy-hfuJc1/modules.tar to /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk
- extract-modules duration: 0.58
- start: 1.5.5 apply-overlay-tftp (max 240s)
- Applying overlay /var/lib/lava/dispatcher/slave/tmp/13/overlay-1.5.2.5.tar.gz to ramdisk
- apply-overlay-tftp duration: 0.33
- start: 1.5.6 configure-preseed-file (max 240s)
- configure-preseed-file duration: 0.00
- start: 1.5.7 compress-ramdisk (max 240s)
- Building ramdisk /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk.cpio containing /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk
- find . | cpio --create --format='newc' > /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk.cpio
- 240460 blocks
- Adding RAMdisk u-boot header.
- nice mkimage -A arm -T ramdisk -C none -d /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk.cpio.gz /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk.cpio.gz.uboot
- command output Image Name:
- Created: Fri May 5 16:13:34 2017
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 51515763 Bytes = 50308.36 kB = 49.13 MB
- Load Address: 00000000
- Entry Point: 00000000
- rename /var/lib/lava/dispatcher/tmp/13/extract-overlay-ramdisk-Em2xVB/ramdisk.cpio.gz.uboot to /var/lib/lava/dispatcher/tmp/13/tftp-deploy-hfuJc1/ramdisk.cpio.gz.uboot
- compress-ramdisk duration: 7.03
- prepare-tftp-overlay duration: 12.65
- start: 1.6 deploy-device-env (max 240s)
- deploy-device-env duration: 0.00
- tftp-deploy duration: 24.60
- start: 2 uboot-action (max 240s)
- start: 2.1 uboot-prepare-kernel (max 240s)
- uboot-prepare-kernel duration: 0.00
- start: 2.2 uboot-from-media (max 240s)
- uboot-from-media duration: 0.00
- start: 2.3 uboot-overlay (max 240s)
- Parsed boot commands: setenv autoload no; setenv initrd_high '0xffffffff'; setenv fdt_high '0xffffffff'; setenv kernel_addr_r '0x82000000'; setenv initrd_addr_r '0x83000000'; setenv fdt_addr_r '0x88000000'; setenv loadkernel 'tftp ${kernel_addr_r} 13/tftp-deploy-hfuJc1/vmlinuz'; setenv loadinitrd 'tftp ${initrd_addr_r} 13/tftp-deploy-hfuJc1/ramdisk.cpio.gz.uboot; setenv initrd_size ${filesize}'; setenv loadfdt 'tftp ${fdt_addr_r} 13/tftp-deploy-hfuJc1/am335x-boneblack.dtb'; setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 ip=dhcp'; setenv bootcmd 'dhcp; setenv serverip 10.0.0.39; run loadkernel; run loadinitrd; run loadfdt; bootz 0x82000000 0x83000000 0x88000000'; boot
- uboot-overlay duration: 0.00
- start: 2.4 connect-device (max 240s)
- connect-device Connecting to device using '/vagrant/scripts/connectBBB.sh 10.0.0.39 8020 root lavauser123'
- connect-device duration: 0.02
- start: 2.5 uboot-retry (max 240s)
- start: 2.5.1 reboot-device (max 240s)
- start: 2.5.1.1 soft-reboot (max 240s)
- reboot
- reboot
- reboot -n
- reboot -n
- reboot -n -f
- reboot -n -f
- soft-reboot: Wait for prompt Restarting system. 120 seconds
- spawn telnet 10.0.0.39 8020
- Trying 10.0.0.39...
- Connected to 10.0.0.39.
- Escape character is '^]'.
- re
- ser2net port 8020 device /dev/ttyUSB0 [115200 N81] (Debian GNU/Linux)
- Debian GNU/Linux 7 beaglebone ttyO0
- default username:password is [debian:temppwd]
- Support/FAQ: http://elinux.org/Beagleboard:BebagleBoneBlack_Debian
- The IP Address for usb0 is: 192.168.7.2
- beaglebone login: root
- ooLast login: Fri May 5 15:36:05 UTC 2017 on ttyO0
- Linux beaglebone 3.8.13-bone50 #1 SMP Tue May 13 13:24:52 UTC 2014 armv7l
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABtSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- reboroot@beaglebone:~# ot -n
- reboot -n -f
- lavauser123
- -bash: lavauser123: command not found
- root@beaglebone:~# reboot
- Broadcast message from root@beaglebone (ttyO0) (Fri May 5 16:13:36 2017):
- The system is going down for reboot NOW!
- root@beaglebone:~# reboot -n
- Broadcast message from root@beaglebone (ttyO0) (Fri May 5 16:13:36 2017):
- The system is going down for reboot NOW!
- root@beaglebone:~# reboot -n -f
- [ 941.837637] (NULL device *): gadget not registered.
- [ 941.979872] Restarting system.
- soft-reboot duration: 2.20
- case: soft-reboot
- definition: lava
- result: pass
- level: 2.5.1.1
- extra: ...
- start: 2.5.1.2 pdu_reboot (max 240s)
- Adjuvant pdu_reboot skipped
- pdu_reboot duration: 0.01
- start: 2.5.1.3 power_on (max 240s)
- power_on duration: 0.00
- reboot-device duration: 2.23
- start: 2.5.2 u-boot-interrupt (max 240s)
- Changing prompt to 'Hit any key to stop autoboot'
- u-boot-interrupt: Wait for prompt Hit any key to stop autoboot. 30 seconds
- U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
- reading args
- spl_load_image_fat_os: error reading image args, err - -1
- reading u-boot.img
- reading u-boot.img
- U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
- I2C: ready
- DRAM: 512 MiB
- NAND: 0 MiB
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- *** Warning - readenv() failed, using default environment
- Net: <ethaddr> not set. Validating first E-fuse MAC
- cpsw, usb_ether
- Hit any key to stop autoboot
- u-boot-interrupt: Wait for prompt U-Boot. 30 seconds
- : 1 0
- U-Boot#
- u-boot-interrupt duration: 1.36
- start: 2.5.3 expect-bootloader-connection (max 240s)
- expect-bootloader-connection: Waiting for prompt
- expect-bootloader-connection: Wait for prompt U-Boot. 120 seconds
- expect-bootloader-connection duration: 0.00
- start: 2.5.4 u-boot-commands (max 240s)
- Changing prompt to U-Boot
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- U-Boot#
- setenv autoload no
- U-Boot# setenv autoload no
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv autoload no
- setenv initrd_high '0xffffffff'
- U-Bootsetenv initrd_high '0xffffffff'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- # setenv initrd_high '0xffffffff'
- setenv fdt_high '0xffffffff'
- U-Boot#setenv fdt_high '0xffffffff'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv fdt_high '0xffffffff'
- setenv kernel_addr_r '0x82000000'
- U-Bootsetenv kernel_addr_r '0x82000000'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- # setenv kernel_addr_r '0x82000000'
- setenv initrd_addr_r '0x83000000'
- U-Boot# setenv initrd_addr_r '0x83000000'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv initrd_addr_r '0x83000000'
- setenv fdt_addr_r '0x88000000'
- U-Boot#setenv fdt_addr_r '0x88000000'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv fdt_addr_r '0x88000000'
- setenv loadkernel 'tftp ${kernel_addr_r} 13/tftp-deploy-hfuJc1/vmlinuz'
- U-Boot# setenv loadkernel 'tftp ${kernel_addr_r} 13/tftp-deploy-hfuJc1/vmlinuz'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv loadkernel 'tftp ${kernel_addr_r} 13/tftp-deploy-hfuJc1/vmlinuz'
- setenv loadinitrd 'tftp ${initrd_addr_r} 13/tftp-deploy-hfuJc1/ramdisk.cpio.gz.uboot; setenv initrd_size ${filesize}'
- U-Boot# setenv loadinitrd 'tftp ${initrd_addr_r} 13/tftp-deploy-hfuJc1/ramdisk.cpio.gz.uboot; setenv initrd_size ${filesize}'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv loadinitrd 'tftp ${initrd_addr_r} 13/tftp-deploy-hfuJc1/ramdisk.cpio.gz.uboot; setenv initrd_size ${filesize}'
- setenv loadfdt 'tftp ${fdt_addr_r} 13/tftp-deploy-hfuJc1/am335x-boneblack.dtb'
- U-Boot# setenv loadfdt 'tftp ${fdt_addr_r} 13/tftp-deploy-hfuJc1/am335x-boneblack.dtb'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv loadfdt 'tftp ${fdt_addr_r} 13/tftp-deploy-hfuJc1/am335x-boneblack.dtb'
- setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 ip=dhcp'
- U-Boot# setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 ip=dhcp'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 ip=dhcp'
- setenv bootcmd 'dhcp; setenv serverip 10.0.0.39; run loadkernel; run loadinitrd; run loadfdt; bootz 0x82000000 0x83000000 0x88000000'
- U-Boot#setenv bootcmd 'dhcp; setenv serverip 10.0.0.39; run loadkernel; run loadinitrd; run loadfdt; bootz 0x82000000 0x83000000 0x88000000'
- u-boot-commands: Wait for prompt U-Boot. 120 seconds
- setenv bootcmd 'dhcp; setenv serverip 10.0.0.39; run loadkernel; run loadinitrd; run loadfdt; bootz 0x82000000 0x83000000 0x88000000'
- boot
- U-Boot# boot
- Changing prompt to Booting Linux
- u-boot-commands: Wait for prompt Booting Linux. 120 seconds
- boot
- link up on port 0, speed 100, full duplex
- BOOTP broadcast 1
- *** Unhandled DHCP Option in OFFER/ACK: 2
- *** Unhandled DHCP Option in OFFER/ACK: 23
- *** Unhandled DHCP Option in OFFER/ACK: 2
- *** Unhandled DHCP Option in OFFER/ACK: 23
- DHCP client bound to address 10.0.0.50
- link up on port 0, speed 100, full duplex
- Using cpsw device
- TFTP from server 10.0.0.39; our IP address is 10.0.0.50
- Filename '13/tftp-deploy-hfuJc1/vmlinuz'.
- Load address: 0x82000000
- Loading: *#################################################################
- #################################################################
- #################################################################
- #######################
- 2.8 MiB/s
- done
- Bytes transferred = 3187808 (30a460 hex)
- link up on port 0, speed 100, full duplex
- Using cpsw device
- TFTP from server 10.0.0.39; our IP address is 10.0.0.50
- Filename '13/tftp-deploy-hfuJc1/ramdisk.cpio.gz.uboot'.
- Load address: 0x83000000
- Loading: *#################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- 2.9 MiB/s
- done
- Bytes transferred = 51515827 (31211b3 hex)
- link up on port 0, speed 100, full duplex
- Using cpsw device
- TFTP from server 10.0.0.39; our IP address is 10.0.0.50
- Filename '13/tftp-deploy-hfuJc1/am335x-boneblack.dtb'.
- Load address: 0x88000000
- Loading: *##
- 1.5 MiB/s
- done
- Bytes transferred = 29018 (715a hex)
- Kernel image @ 0x82000000 [ 0x000000 - 0x30a460 ]
- ## Loading init Ramdisk from Legacy Image at 83000000 ...
- Image Name:
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 51515763 Bytes = 49.1 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 88000000
- Booting using the fdt blob at 0x88000000
- Using Device Tree in place at 88000000, end 8800a159
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- u-boot-commands duration: 58.88
- start: 2.5.5 auto-login-action (max 240s)
- Using line separator: #'\n'#
- Skipping of auto login
- Parsing kernel messages
- -+\[ cut here \]-+\s+(.*\s+-+\[ end trace (\w*) \]-+),(Unhandled fault.*)
- ,Kernel panic - (.*) end Kernel panic,Stack:\s+(.*\s+-+\[ end trace (\w*) \]-+),ALERT! .* does not exist.\s+Dropping to a shell!,\(initramfs\)
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.16.0-4-armmp (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.39-1 (2016-12-30)
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: TI AM335x BeagleBone
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] AM335X ES2.1 (sgx neon )
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @dfac9000 s12672 r8192 d16000 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
- [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 ip=dhcp
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 457648K/523264K available (6434K kernel code, 830K rwdata, 2200K rodata, 688K init, 393K bss, 65616K reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0876b18 (8635 kB)
- [ 0.000000] .init : 0xc0877000 - 0xc0923180 ( 689 kB)
- [ 0.000000] .data : 0xc0924000 - 0xc09f3a50 ( 831 kB)
- [ 0.000000] .bss : 0xc09f3a50 - 0xc0a55f74 ( 394 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
- [ 0.000000] Total of 128 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
- [ 0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
- [ 0.000034] OMAP clocksource: timer1 at 24000000 Hz
- [ 0.000381] Console: colour dummy device 80x30
- [ 0.000415] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
- [ 0.047297] pid_max: default: 32768 minimum: 301
- [ 0.047425] Security Framework initialized
- [ 0.047511] AppArmor: AppArmor disabled by boot time parameter
- [ 0.047518] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.047600] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.047613] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.048527] Initializing cgroup subsys memory
- [ 0.048561] Initializing cgroup subsys devices
- [ 0.048597] Initializing cgroup subsys freezer
- [ 0.048617] Initializing cgroup subsys net_cls
- [ 0.048647] Initializing cgroup subsys blkio
- [ 0.048671] Initializing cgroup subsys perf_event
- [ 0.048684] Initializing cgroup subsys net_prio
- [ 0.048756] CPU: Testing write buffer coherency: ok
- [ 0.048815] ftrace: allocating 23146 entries in 68 pages
- [ 0.105159] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.105537] Setting up static identity map for 0x805c8088 - 0x805c80e0
- [ 0.113823] Brought up 1 CPUs
- [ 0.113847] SMP: Total of 1 processors activated (995.32 BogoMIPS).
- [ 0.113855] CPU: All CPU(s) started in SVC mode.
- [ 0.114687] devtmpfs: initialized
- [ 0.118702] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 0.129301] omap_hwmod: tptc0 using broken dt data from edma
- [ 0.129428] omap_hwmod: tptc1 using broken dt data from edma
- [ 0.129537] omap_hwmod: tptc2 using broken dt data from edma
- [ 0.134023] omap_hwmod: debugss: _wait_target_disable failed
- [ 0.192366] pinctrl core: initialized pinctrl subsystem
- [ 0.192902] regulator-dummy: no parameters
- [ 0.201563] NET: Registered protocol family 16
- [ 0.202079] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.209809] platform 49000000.edma: alias fck already exists
- [ 0.209838] platform 49000000.edma: alias fck already exists
- [ 0.209852] platform 49000000.edma: alias fck already exists
- [ 0.210644] OMAP GPIO hardware version 0.1
- [ 0.218533] No ATAGs?
- [ 0.218561] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.219474] EXYNOS: PMU not supported
- [ 0.219802] omap_init_mbox: hwmod doesn't have valid attrs
- [ 0.220679] Serial: AMBA PL011 UART driver
- [ 0.237378] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
- [ 0.238122] vmmcsd_fixed: 3300 mV
- [ 0.239539] vgaarb: loaded
- [ 0.240091] usbcore: registered new interface driver usbfs
- [ 0.240159] usbcore: registered new interface driver hub
- [ 0.240410] usbcore: registered new device driver usb
- [ 0.240896] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe
- [ 0.240919] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
- [ 0.241153] media: Linux media interface: v0.10
- [ 0.241214] Linux video capture interface: v2.00
- [ 0.241312] pps_core: LinuxPPS API ver. 1 registered
- [ 0.241320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.241349] PTP clock support registered
- [ 0.242868] Switched to clocksource timer1
- [ 0.298369] NET: Registered protocol family 2
- [ 0.299406] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.299456] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.299515] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.299583] TCP: reno registered
- [ 0.299596] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.299616] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.299818] NET: Registered protocol family 1
- [ 0.300419] Unpacking initramfs...
- [ 3.654328] Freeing initrd memory: 50304K (c3001000 - c6121000)
- [ 3.654802] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 3.657371] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 3.657477] audit: initializing netlink subsys (disabled)
- [ 3.657569] audit: type=2000 audit(3.620:1): initialized
- [ 3.659354] zbud: loaded
- [ 3.659713] VFS: Disk quotas dquot_6.5.2
- [ 3.659786] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 3.659968] msgmni has been set to 992
- [ 3.661707] alg: No test for stdrng (krng)
- [ 3.661860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 3.662126] io scheduler noop registered
- [ 3.662142] io scheduler deadline registered
- [ 3.662282] io scheduler cfq registered (default)
- [ 3.663179] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- [ 3.666081] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 3.667894] Serial: AMBA driver
- [ 3.668138] Serial: IMX driver
- [ 3.668703] omap_uart 44e09000.serial: no wakeirq for uart0
- [ 3.668917] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
- [ 4.381603] console [ttyO0] enabled
- [ 4.389146] mousedev: PS/2 mouse device common for all mice
- [ 4.396380] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
- [ 4.403889] 44e3e000.rtc: already running
- [ 4.409696] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.416118] hidraw: raw HID events driver (C) Jiri Kosina
- [ 4.422400] usbcore: registered new interface driver usbhid
- [ 4.428243] usbhid: USB HID core driver
- [ 4.433013] TCP: cubic registered
- [ 4.436594] NET: Registered protocol family 10
- [ 4.442337] mip6: Mobile IPv6
- [ 4.445549] NET: Registered protocol family 17
- [ 4.450229] mpls_gso: MPLS GSO support
- [ 4.454289] omap_voltage_late_init: Voltage driver support not added
- [ 4.461428] ThumbEE CPU extension supported.
- [ 4.465957] Registering SWP/SWPB emulation handler
- [ 4.471784] registered taskstats version 1
- [ 4.483735] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- [ 4.490090] omap_rtc 44e3e000.rtc: setting system clock to 2014-05-15 02:35:33 UTC (1400121333)
- [ 4.503735] vmmcsd_fixed: disabling
- [ 4.508730] Freeing unused kernel memory: 688K (c0877000 - c0923000)
- Loading, please wait...
- [ 4.598665] systemd-udevd[59]: starting version 215
- [ 4.613375] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 4.740680] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 4.846777] [drm] Initialized drm 1.1.0 20060810
- [ 4.868166] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
- [ 4.918952] mmc1: BKOPS_EN bit is not set
- [ 4.923524] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
- [ 4.943882] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
- [ 4.950076] mmc1: new high speed MMC card at address 0001
- [ 4.966961] omap-sham 53100000.sham: initialization failed.
- [ 4.972971] omap-sham: probe of 53100000.sham failed with error -22
- [ 4.981317] cpsw 4a100000.ethernet: Detected MACID = 88:c2:55:4c:5c:e7
- [ 4.991020] mmcblk0: mmc1:0001 S10004 3.56 GiB
- [ 5.011445] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB
- [ 5.053671] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB
- [ 5.079214] mmcblk0: p1 p2
- [ 5.106624] mmcblk0boot1: unknown partition table
- [ 5.138995] mmcblk0boot0: unknown partition table
- [ 5.228452] 47401300.usb-phy supply vcc not found, using dummy regulator
- [ 5.238465] tda998x 0-0070: found TDA19988
- [ 5.252612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 5.259633] [drm] No driver support for vblank timestamp query.
- [ 5.299413] tilcdc 4830e000.lcdc: No connectors reported connected with modes
- [ 5.325281] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517
- [ 5.351479] [drm] Cannot find any crtc or sizes - going 1024x768
- [ 5.361885] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral
- [ 5.397686] Console: switching to colour frame buffer device 128x48
- [ 5.416819] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517
- [ 5.416862] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral
- [ 5.431233] 47401b00.usb-phy supply vcc not found, using dummy regulator
- [ 5.434377] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- [ 5.434797] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
- [ 5.435113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 5.435121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.435126] usb usb1: Product: MUSB HDRC host driver
- [ 5.435131] usb usb1: Manufacturer: Linux 3.16.0-4-armmp musb-hcd
- [ 5.435137] usb usb1: SerialNumber: musb-hdrc.1.auto
- [ 5.435966] hub 1-0:1.0: USB hub found
- [ 5.436012] hub 1-0:1.0: 1 port detected
- [ 5.443197] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
- [ 5.443206] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
- [ 5.497732] libphy: 4a101000.mdio: probed
- [ 5.497750] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
- [ 5.680446] tilcdc 4830e000.lcdc: fb0: frame buffer device
- [ 5.686311] tilcdc 4830e000.lcdc: registered panic notifier
- [ 5.692295] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- done.
- Gave up waiting for root device. Common problems:
- - Boot args (cat /proc/cmdline)
- - Check rootdelay= (did the system wait long enough?)
- - Check root= (did the system wait for the right device?)
- - Missing modules (cat /proc/modules; ls /dev)
- ALERT! /dev/ram0 does not exist. Dropping to a shell!
- Matched prompt #4: ALERT! .* does not exist.\s+Dropping to a shell!
- auto-login-action: alert
- #
- #
- modprobe: module i8042 not found in modules.dep
- [ 36.019689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- #[ 36.031932] ehci-pci: EHCI PCI platform driver
- [ 36.049097] ehci-orion: EHCI orion driver
- modprobe: module uhci-hcd not found in modules.dep
- [ 36.128972] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- <<lava: broken line>>
- Enter 'help' for a list of built-in commands.
- /bin/sh: can't access tty; job control turned off
- (initramfs) #
- Matched prompt #5: \(initramfs\)
- Kernel warnings or errors detected.
- Setting shell prompt(s) to ['\\(initramfs\\)', 'lava-test: # ']
- export PS1="lava-test: # "
- (initexport PS1=\"lava-test: # \"
- auto-login-action duration: 33.87
- case: auto-login-action
- definition: lava
- result: pass
- level: 2.5.5
- extra: ...
- start: 2.5.6 expect-shell-connection (max 240s)
- expect-shell-connection: Waiting for prompt \(initramfs\), lava-test: #
- expect-shell-connection: Wait for prompt ['\\(initramfs\\)', 'lava-test: # ']. 120 seconds
- ramfs) [6nexport PS1=\"lava-test: # \"
- expect-shell-connection duration: 0.01
- start: 2.5.7 export-device-env (max 240s)
- export-device-env duration: 0.00
- Setting default test shell prompt
- \(initramfs\),lava-test: #
- uboot-retry: Wait for prompt ['\\(initramfs\\)', 'lava-test: # ']. 240 seconds
- uboot-retry duration: 96.40
- uboot-action duration: 96.43
- start: 3 lava-test-retry (max 300s)
- start: 3.1 lava-test-shell (max 300s)
- Executing test definitions using ShellSession
- #
- #
- lava-test-shell: Wait for prompt ['\\(initramfs\\)', 'lava-test: # ']. 120 seconds
- Using /lava-13
- ls -l /lava-13/
- lava-test: # [6n#ls -l /lava-13/
- /lava-13/bin/lava-test-runner /lava-13/0
- /lava-13/bin/lava-test-runner /lava-13/0
- Test shell will use the higher of the action timeout and connection timeout.
- Setting action timeout: 300 seconds
- lava-test: # [6nls -l /lava-13/
- total 8
- drwxrwxrwx 3 0 0 0 May 5 2017 0
- drwxr-xr-x 2 0 0 0 May 5 2017 bin
- -rw-rw-rw- 1 0 0 1679 May 5 2017 lava
- -rw-rw-rw- 1 0 0 406 May 5 2017 lava.pub
- drwxr-xr-x 2 0 0 0 May 5 2017 results
- drwxr-xr-x 2 0 0 0 May 5 2017 tests
- lava-test: # [6n/lava-13/bin/lava-test-runner /lava-13/0
- /lava-13/0
- <LAVA_TEST_RUNNER>: started
- <LAVA_TEST_RUNNER>: looking for work in /lava-13/0/lava-test-runner.conf-1400121369
- <LAVA_TEST_RUNNER>: running 0_smoke-tests under lava-test-shell...
- <LAVA_TEST_RUNNER>: save hardware/software context info for 0_smoke-tests...
- + export TESTRUN_ID=0_smoke-tests
- + cd /lava-13/0/tests/0_smoke-tests
- + cat uuid
- + UUID=13_1.5.2.4.1
- + echo <LAVA_SIGNAL_STARTRUN 0_smoke-tests 13_1.5.2.4.1>
- Received signal: <STARTRUN> 0_smoke-tests 13_1.5.2.4.1
- Starting test lava.0_smoke-tests (13_1.5.2.4.1)
- Enabling test definition pattern '(?P<test_case_id>.*-*)\\s+:\\s+(?P<result>(PASS|pass|FAIL|fail|SKIP|skip|UNKNOWN|unknown))'
- Enabling test definition fixup {'FAIL': 'fail', 'SKIP': 'skip', 'PASS': 'pass', 'UNKNOWN': 'unknown'}
- case: 0_smoke-tests
- definition: lava
- result: fail
- uuid: 13_1.5.2.4.1
- <LAVA_SIGNAL_STARTRUN 0_smoke-tests 13_1.5.2.4.1>
- Received signal: <STARTRUN> 0_smoke-tests 13_1.5.2.4.1
- Starting test lava.0_smoke-tests (13_1.5.2.4.1)
- Enabling test definition pattern '(?P<test_case_id>.*-*)\\s+:\\s+(?P<result>(PASS|pass|FAIL|fail|SKIP|skip|UNKNOWN|unknown))'
- Enabling test definition fixup {'FAIL': 'fail', 'SKIP': 'skip', 'PASS': 'pass', 'UNKNOWN': 'unknown'}
- case: 0_smoke-tests
- definition: lava
- result: fail
- uuid: 13_1.5.2.4.1
- + lava-test-case linux-linaro-ubuntu-pwd --shell pwd
- <LAVA_SIGNAL_STARTTC linux-linaro-ubuntu-pwd>
- /lava-13/0/tests/0_smoke-tests
- <LAVA_SIGNAL_ENDTC linux-linaro-ubuntu-pwd>
- Received signal: <STARTTC> linux-linaro-ubuntu-pwd
- Received signal: <ENDTC> linux-linaro-ubuntu-pwd
- <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=linux-linaro-ubuntu-pwd RESULT=pass>
- + lava-test-case linux-linaro-ubuntu-uname --shell uname -a
- Received signal: <TESTCASE> TEST_CASE_ID=linux-linaro-ubuntu-pwd RESULT=pass
- case: linux-linaro-ubuntu-pwd
- definition: 0_smoke-tests
- result: pass
- <LAVA_SIGNAL_STARTTC linux-linaro-ubuntu-uname>
- Received signal: <STARTTC> linux-linaro-ubuntu-uname
- Linux (none) 3.16.0-4-armmp #1 SMP Debian 3.16.39-1 (2016-12-30) armv7l GNU/Linux
- <LAVA_SIGNAL_ENDTC linux-linaro-ubuntu-uname>
- Received signal: <ENDTC> linux-linaro-ubuntu-uname
- Received signal: <TESTCASE> TEST_CASE_ID=linux-linaro-ubuntu-uname RESULT=pass
- case: linux-linaro-ubuntu-uname
- definition: 0_smoke-tests
- result: pass
- <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=linux-linaro-ubuntu-uname RESULT=pass>
- + lava-test-case linux-linaro-ubuntu-vmstat --shell vmstat
- <LAVA_SIGNAL_STARTTC linux-linaro-ubuntu-vmstat>
- Received signal: <STARTTC> linux-linaro-ubuntu-vmstat
- /lava-13/0/../bin/lava-test-case: eval: line 1: vmstat: not found
- <LAVA_SIGNAL_ENDTC linux-linaro-ubuntu-vmstat>
- Received signal: <ENDTC> linux-linaro-ubuntu-vmstat
- <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=linux-linaro-ubuntu-vmstat RESULT=fail>
- Received signal: <TESTCASE> TEST_CASE_ID=linux-linaro-ubuntu-vmstat RESULT=fail
- case: linux-linaro-ubuntu-vmstat
- definition: 0_smoke-tests
- result: fail
- + lava-test-case linux-linaro-ubuntu-ifconfig --shell ifconfig -a
- <LAVA_SIGNAL_STARTTC linux-linaro-ubuntu-ifconfig>
- Received signal: <STARTTC> linux-linaro-ubuntu-ifconfig
- eth0 Link encap:Ethernet HWaddr 88:C2:55:4C:5C:E7
- BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- Interrupt:56
- lo Link encap:Local Loopback
- LOOPBACK MTU:65536 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- <LAVA_SIGNAL_ENDTC linux-linaro-ubuntu-ifconfig>
- Received signal: <ENDTC> linux-linaro-ubuntu-ifconfig
- <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=linux-linaro-ubuntu-ifconfig RESULT=pass>
- Received signal: <TESTCASE> TEST_CASE_ID=linux-linaro-ubuntu-ifconfig RESULT=pass
- case: linux-linaro-ubuntu-ifconfig
- definition: 0_smoke-tests
- result: pass
- + lava-test-case linux-linaro-ubuntu-lscpu --shell lscpu
- <LAVA_SIGNAL_STARTTC linux-linaro-ubuntu-lscpu>
- Received signal: <STARTTC> linux-linaro-ubuntu-lscpu
- /lava-13/0/../bin/lava-test-case: eval: line 1: lscpu: not found
- <LAVA_SIGNAL_ENDTC linux-linaro-ubuntu-lscpu>
- Received signal: <ENDTC> linux-linaro-ubuntu-lscpu
- <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=linux-linaro-ubuntu-lscpu RESULT=fail>
- Received signal: <TESTCASE> TEST_CASE_ID=linux-linaro-ubuntu-lscpu RESULT=fail
- case: linux-linaro-ubuntu-lscpu
- definition: 0_smoke-tests
- result: fail
- + lava-test-case linux-linaro-ubuntu-lsb_release --shell lsb_release -a
- <LAVA_SIGNAL_STARTTC linux-linaro-ubuntu-lsb_release>
- Received signal: <STARTTC> linux-linaro-ubuntu-lsb_release
- /lava-13/0/../bin/lava-test-case: eval: line 1: lsb_release: not found
- <LAVA_SIGNAL_ENDTC linux-linaro-ubuntu-lsb_release>
- Received signal: <ENDTC> linux-linaro-ubuntu-lsb_release
- Received signal: <TESTCASE> TEST_CASE_ID=linux-linaro-ubuntu-lsb_release RESULT=fail
- case: linux-linaro-ubuntu-lsb_release
- definition: 0_smoke-tests
- result: fail
- <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=linux-linaro-ubuntu-lsb_release RESULT=fail>
- + echo <LAVA_SIGNAL_ENDRUN 0_smoke-tests 13_1.5.2.4.1>
- Received signal: <ENDRUN> 0_smoke-tests 13_1.5.2.4.1
- Ending use of test pattern.
- Ending test lava.0_smoke-tests (13_1.5.2.4.1), duration 0.20
- case: 0_smoke-tests
- definition: lava
- duration: 0.20
- result: pass
- uuid: 13_1.5.2.4.1
- <LAVA_SIGNAL_ENDRUN 0_smoke-tests 13_1.5.2.4.1>
- Received signal: <ENDRUN> 0_smoke-tests 13_1.5.2.4.1
- Ending use of test pattern.
- Ending test lava.0_smoke-tests (13_1.5.2.4.1), duration 0.00
- case: 0_smoke-tests
- definition: lava
- duration: 0.00
- result: pass
- uuid: 13_1.5.2.4.1
- <LAVA_TEST_RUNNER>: 0_smoke-tests exited with: 0
- 0_smoke-tests-1400121369
- ok: lava_test_shell seems to have completed
- linux-linaro-ubuntu-ifconfig: pass
- linux-linaro-ubuntu-lsb_release: fail
- linux-linaro-ubuntu-lscpu: fail
- linux-linaro-ubuntu-pwd: pass
- linux-linaro-ubuntu-uname: pass
- linux-linaro-ubuntu-vmstat: fail
- lava-test-shell duration: 3.42
- lava-test-retry duration: 3.43
- start: 4 finalize (max 30s)
- start: 4.1 power_off (max 5s)
- power_off duration: 0.00
- Status: Complete
- finalize duration: 0.10
- case: finalize
- definition: lava
- result: pass
- level: 4
- extra: ...
- Cleanup: removing /var/lib/lava/dispatcher/tmp/13
Add Comment
Please, Sign In to add comment