API tools faq
paste
Skybob22

Fresh Jammy/Focal

Skybob22
Jul 3rd, 2022
60
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.61 KB | None | 0 0
raw download clone embed print report
  1. channel 0
  2. CS = 0
  3. MR0=0x18
  4. MR4=0x1
  5. MR5=0x1
  6. MR8=0x8
  7. MR12=0x72
  8. MR14=0x72
  9. MR18=0x0
  10. MR19=0x0
  11. MR24=0x8
  12. MR25=0x0
  13. CS = 1
  14. MR0=0x18
  15. MR4=0x1
  16. MR5=0x1
  17. MR8=0x8
  18. MR12=0x72
  19. MR14=0x72
  20. MR18=0x0
  21. MR19=0x0
  22. MR24=0x8
  23. MR25=0x0
  24. channel 1
  25. CS = 0
  26. MR0=0x18
  27. MR4=0x1
  28. MR5=0x1
  29. MR8=0x8
  30. MR12=0x72
  31. MR14=0x72
  32. MR18=0x0
  33. MR19=0x0
  34. MR24=0x8
  35. MR25=0x0
  36. CS = 1
  37. MR0=0x18
  38. MR4=0x1
  39. MR5=0x1
  40. MR8=0x8
  41. MR12=0x72
  42. MR14=0x72
  43. MR18=0x0
  44. MR19=0x0
  45. MR24=0x8
  46. MR25=0x0
  47. channel 0 training pass!
  48. channel 1 training pass!
  49. change freq to 416MHz 0,1
  50. Channel 0: LPDDR4,416MHz
  51. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  52. Channel 1: LPDDR4,416MHz
  53. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  54. 256B stride
  55. channel 0
  56. CS = 0
  57. MR0=0x18
  58. MR4=0x1
  59. MR5=0x1
  60. MR8=0x8
  61. MR12=0x72
  62. MR14=0x72
  63. MR18=0x0
  64. MR19=0x0
  65. MR24=0x8
  66. MR25=0x0
  67. CS = 1
  68. MR0=0x18
  69. MR4=0x1
  70. MR5=0x1
  71. MR8=0x8
  72. MR12=0x72
  73. MR14=0x72
  74. MR18=0x0
  75. MR19=0x0
  76. MR24=0x8
  77. MR25=0x0
  78. channel 1
  79. CS = 0
  80. MR0=0x18
  81. MR4=0x1
  82. MR5=0x1
  83. MR8=0x8
  84. MR12=0x72
  85. MR14=0x72
  86. MR18=0x0
  87. MR19=0x0
  88. MR24=0x8
  89. MR25=0x0
  90. CS = 1
  91. MR0=0x18
  92. MR4=0x1
  93. MR5=0x1
  94. MR8=0x8
  95. MR12=0x72
  96. MR14=0x72
  97. MR18=0x0
  98. MR19=0x0
  99. MR24=0x8
  100. MR25=0x0
  101. channel 0 training pass!
  102. channel 1 training pass!
  103. channel 0, cs 0, advanced training done
  104. channel 0, cs 1, advanced training done
  105. channel 1, cs 0, advanced training done
  106. channel 1, cs 1, advanced training done
  107. change freq to 856MHz 1,0
  108. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  109. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  110. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  111. ddr_set_rate to 328MHZ
  112. ddr_set_rate to 666MHZ
  113. ddr_set_rate to 928MHZ
  114. channel 0, cs 0, advanced training done
  115. channel 0, cs 1, advanced training done
  116. channel 1, cs 0, advanced training done
  117. channel 1, cs 1, advanced training done
  118. ddr_set_rate to 416MHZ, ctl_index 0
  119. ddr_set_rate to 856MHZ, ctl_index 1
  120. support 416 856 328 666 928 MHz, current 856MHz
  121. OUT
  122. Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
  123. CPUId = 0x0
  124. ChipType = 0x10, 346
  125. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  126. mmc: ERROR: Card did not respond to voltage select!
  127. emmc reinit
  128. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  129. mmc: ERROR: Card did not respond to voltage select!
  130. emmc reinit
  131. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  132. mmc: ERROR: Card did not respond to voltage select!
  133. SdmmcInit=2 1
  134. mmc0:cmd5,20
  135. SdmmcInit=0 0
  136. BootCapSize=0
  137. UserCapSize=30436MB
  138. FwPartOffset=2000 , 0
  139. StorageInit ok = 56597
  140. SecureMode = 0
  141. SecureInit read PBA: 0x4
  142. SecureInit read PBA: 0x404
  143. SecureInit read PBA: 0x804
  144. SecureInit read PBA: 0xc04
  145. SecureInit read PBA: 0x1004
  146. SecureInit read PBA: 0x1404
  147. SecureInit read PBA: 0x1804
  148. SecureInit read PBA: 0x1c04
  149. SecureInit ret = 0, SecureMode = 0
  150. atags_set_bootdev: ret:(0)
  151. GPT 0x3335db8 signature is wrong
  152. recovery gpt...
  153. GPT 0x3335db8 signature is wrong
  154. recovery gpt fail!
  155. Trust Addr:0x4000, 0x58334c42
  156. No find bl30.bin
  157. No find bl32.bin
  158. Load uboot, ReadLba = 2000
  159. Load OK, addr=0x200000, size=0xc15e8
  160. RunBL31 0x40000 @ 166319 us
  161. NOTICE: BL31: v1.3(release):845ee93
  162. NOTICE: BL31: Built : 15:51:11, Jul 22 2020
  163. NOTICE: BL31: Rockchip release version: v1.1
  164. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  165. INFO: Using opteed sec cpu_context!
  166. INFO: boot cpu mask: 0
  167. INFO: plat_rockchip_pmu_init(1196): pd status 3e
  168. INFO: BL31: Initializing runtime services
  169. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  170. ERROR: Error initializing runtime service opteed_fast
  171. INFO: BL31: Preparing for EL3 exit to normal world
  172. INFO: Entry point address = 0x200000
  173. INFO: SPSR = 0x3c9
  174.  
  175.  
  176. U-Boot 2022.04-armbian (Jun 22 2022 - 07:18:50 +0000)
  177.  
  178. SoC: Rockchip rk3399
  179. Reset cause: POR
  180. Model: FriendlyElec NanoPi R4S
  181. DRAM: 3.9 GiB
  182. PMIC: RK808
  183. Core: 262 devices, 23 uclasses, devicetree: separate
  184. MMC: mmc@fe320000: 1
  185. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  186.  
  187. rk3399_vop vop@ff8f0000: failed to get ahb reset (ret=-524)
  188. rk3399_vop vop@ff8f0000: failed to get ahb reset (ret=-524)
  189. In: serial
  190. Out: serial
  191. Err: serial
  192. Net: eth0: ethernet@fe300000
  193. Hit any key to stop autoboot: 0
  194. starting USB...
  195. Bus usb@fe380000: USB EHCI 1.00
  196. Bus usb@fe3c0000: USB EHCI 1.00
  197. Bus usb@fe800000: Register 2000140 NbrPorts 2
  198. Starting the controller
  199. USB XHCI 1.10
  200. Bus usb@fe900000: Register 2000140 NbrPorts 2
  201. Starting the controller
  202. USB XHCI 1.10
  203. scanning bus usb@fe380000 for devices... 1 USB Device(s) found
  204. scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
  205. scanning bus usb@fe800000 for devices... 1 USB Device(s) found
  206. scanning bus usb@fe900000 for devices... 1 USB Device(s) found
  207. scanning usb for storage devices... 0 Storage Device(s) found
  208.  
  209. Device 0: unknown device
  210. switch to partitions #0, OK
  211. mmc1 is current device
  212. Scanning mmc 1:1...
  213. Found U-Boot script /boot/boot.scr
  214. 3185 bytes read in 5 ms (622.1 KiB/s)
  215. ## Executing script at 00500000
  216. Boot script loaded from mmc 1
  217. 177 bytes read in 4 ms (43 KiB/s)
  218. 14237885 bytes read in 605 ms (22.4 MiB/s)
  219. 30540288 bytes read in 1295 ms (22.5 MiB/s)
  220. 77471 bytes read in 11 ms (6.7 MiB/s)
  221. 2698 bytes read in 7 ms (376 KiB/s)
  222. Applying kernel provided DT fixup script (rockchip-fixup.scr)
  223. ## Executing script at 09000000
  224. Moving Image from 0x2080000 to 0x2200000, end=3fc0000
  225. ## Loading init Ramdisk from Legacy Image at 06000000 ...
  226. Image Name: uInitrd
  227. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  228. Data Size: 14237821 Bytes = 13.6 MiB
  229. Load Address: 00000000
  230. Entry Point: 00000000
  231. Verifying Checksum ... OK
  232. ## Flattened Device Tree blob at 01f00000
  233. Booting using the fdt blob at 0x1f00000
  234. Host not halted after 16000 microseconds.
  235. Host not halted after 16000 microseconds.
  236. Loading Ramdisk to f1191000, end f1f2507d ... OK
  237. Loading Device Tree to 00000000f1115000, end 00000000f1190fff ... OK
  238.  
  239. Starting kernel ...
  240.  
  241. Loading, please wait...
  242. Starting version 245.4-4ubuntu3.17
  243. Begin: Loading essential drivers ... done.
  244. Begin: Running /scripts/init-premount ... done.
  245. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  246. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  247. done.
  248. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
  249. done.
  250. Gave up waiting for root file system device. Common problems:
  251. - Boot args (cat /proc/cmdline)
  252. - Check rootdelay= (did the system wait long enough?)
  253. - Missing modules (cat /proc/modules; ls /dev)
  254. ALERT! UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx does not exist. Dropping to a shell!
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!