API tools faq
paste
ajn1963

Untitled

ajn1963
Feb 13th, 2025
79
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 130.31 KB | None | 0 0
raw download clone embed print report
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <https://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23.  
  24. #define CONFIG_EXAMPLES_DIR "BIQU/B1 - SKR 1.4"
  25.  
  26. // Enable this option for BLTouch support
  27. #define B1_USE_BLTOUCH
  28.  
  29. /**
  30. * Configuration.h
  31. *
  32. * Basic settings such as:
  33. *
  34. * - Type of electronics
  35. * - Type of temperature sensor
  36. * - Printer geometry
  37. * - Endstop configuration
  38. * - LCD controller
  39. * - Extra features
  40. *
  41. * Advanced settings can be found in Configuration_adv.h
  42. */
  43. #define CONFIGURATION_H_VERSION 02010205
  44.  
  45. //===========================================================================
  46. //============================= Getting Started =============================
  47. //===========================================================================
  48.  
  49. /**
  50. * Here are some useful links to help get your machine configured and calibrated:
  51. *
  52. * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all
  53. *
  54. * Průša Calculator: https://blog.prusa3d.com/calculator_3416/
  55. *
  56. * Calibration Guides: https://reprap.org/wiki/Calibration
  57. * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  58. * https://web.archive.org/web/20220907014303/sites.google.com/site/repraplogphase/calibration-of-your-reprap
  59. * https://youtu.be/wAL9d7FgInk
  60. * https://teachingtechyt.github.io/calibration.html
  61. *
  62. * Calibration Objects: https://www.thingiverse.com/thing:5573
  63. * https://www.thingiverse.com/thing:1278865
  64. */
  65.  
  66. // @section info
  67.  
  68. // Author info of this build printed to the host during boot and M115
  69. #define STRING_CONFIG_H_AUTHOR "(AJ Nemeth, SKR V1.4 Jan 2025)" // Who made the changes.
  70. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
  71.  
  72. /**
  73. * *** VENDORS PLEASE READ ***
  74. *
  75. * Marlin allows you to add a custom boot image for Graphical LCDs.
  76. * With this option Marlin will first show your custom screen followed
  77. * by the standard Marlin logo with version number and web URL.
  78. *
  79. * We encourage you to take advantage of this new feature and we also
  80. * respectfully request that you retain the unmodified Marlin boot screen.
  81. */
  82.  
  83. // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
  84. #define SHOW_BOOTSCREEN
  85.  
  86. // Show the bitmap in Marlin/_Bootscreen.h on startup.
  87. //#define SHOW_CUSTOM_BOOTSCREEN
  88.  
  89. // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
  90. //#define CUSTOM_STATUS_SCREEN_IMAGE
  91.  
  92. // @section machine
  93.  
  94. // Choose the name from boards.h that matches your setup
  95. #ifndef MOTHERBOARD
  96. #define MOTHERBOARD BOARD_BTT_SKR_V1_4
  97. #endif
  98.  
  99. // @section serial
  100.  
  101. /**
  102. * Select the serial port on the board to use for communication with the host.
  103. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  104. * Serial port -1 is the USB emulated serial port, if available.
  105. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  106. *
  107. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  108. */
  109. #define SERIAL_PORT 0
  110.  
  111. /**
  112. * Serial Port Baud Rate
  113. * This is the default communication speed for all serial ports.
  114. * Set the baud rate defaults for additional serial ports below.
  115. *
  116. * 250000 works in most cases, but you might try a lower speed if
  117. * you commonly experience drop-outs during host printing.
  118. * You may try up to 1000000 to speed up SD file transfer.
  119. *
  120. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  121. */
  122. #define BAUDRATE 115200
  123.  
  124. //#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
  125.  
  126. /**
  127. * Select a secondary serial port on the board to use for communication with the host.
  128. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
  129. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
  130. */
  131. #define SERIAL_PORT_2 -1
  132. //#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
  133.  
  134. /**
  135. * Select a third serial port on the board to use for communication with the host.
  136. * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1
  137. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  138. */
  139. //#define SERIAL_PORT_3 1
  140. //#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
  141.  
  142. // Enable the Bluetooth serial interface on AT90USB devices
  143. //#define BLUETOOTH
  144.  
  145. // Name displayed in the LCD "Ready" message and Info menu
  146. #define CUSTOM_MACHINE_NAME "BTT SKR V1.4 Redeux V"
  147.  
  148. // Printer's unique ID, used by some programs to differentiate between machines.
  149. // Choose your own or use a service like https://www.uuidgenerator.net/version4
  150. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  151.  
  152. // @section stepper drivers
  153.  
  154. /**
  155. * Stepper Drivers
  156. *
  157. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  158. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  159. *
  160. * Use TMC2208/TMC2208_STANDALONE for TMC2225 drivers and TMC2209/TMC2209_STANDALONE for TMC2226 drivers.
  161. *
  162. * Options: A4988, A5984, DRV8825, LV8729, TB6560, TB6600, TMC2100,
  163. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  164. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  165. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  166. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  167. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  168. */
  169. #define X_DRIVER_TYPE TMC2209 // TMC2209
  170. #define Y_DRIVER_TYPE TMC2209 // TMC2209
  171. #define Z_DRIVER_TYPE TMC2209 // TMC2209
  172. //#define X2_DRIVER_TYPE A4988
  173. //#define Y2_DRIVER_TYPE A4988
  174. //#define Z2_DRIVER_TYPE A4988
  175. //#define Z3_DRIVER_TYPE A4988
  176. //#define Z4_DRIVER_TYPE A4988
  177. //#define I_DRIVER_TYPE A4988
  178. //#define J_DRIVER_TYPE A4988
  179. //#define K_DRIVER_TYPE A4988
  180. //#define U_DRIVER_TYPE A4988
  181. //#define V_DRIVER_TYPE A4988
  182. //#define W_DRIVER_TYPE A4988
  183. #define E0_DRIVER_TYPE TMC2209 // TMC2209
  184. #define E1_DRIVER_TYPE TMC2209 // TMC2209
  185. //#define E2_DRIVER_TYPE A4988
  186. //#define E3_DRIVER_TYPE A4988
  187. //#define E4_DRIVER_TYPE A4988
  188. //#define E5_DRIVER_TYPE A4988
  189. //#define E6_DRIVER_TYPE A4988
  190. //#define E7_DRIVER_TYPE A4988
  191.  
  192. /**
  193. * Additional Axis Settings
  194. *
  195. * Define AXISn_ROTATES for all axes that rotate or pivot.
  196. * Rotational axis coordinates are expressed in degrees.
  197. *
  198. * AXISn_NAME defines the letter used to refer to the axis in (most) G-code commands.
  199. * By convention the names and roles are typically:
  200. * 'A' : Rotational axis parallel to X
  201. * 'B' : Rotational axis parallel to Y
  202. * 'C' : Rotational axis parallel to Z
  203. * 'U' : Secondary linear axis parallel to X
  204. * 'V' : Secondary linear axis parallel to Y
  205. * 'W' : Secondary linear axis parallel to Z
  206. *
  207. * Regardless of these settings the axes are internally named I, J, K, U, V, W.
  208. */
  209. #ifdef I_DRIVER_TYPE
  210. #define AXIS4_NAME 'A' // :['A', 'B', 'C', 'U', 'V', 'W']
  211. #define AXIS4_ROTATES
  212. #endif
  213. #ifdef J_DRIVER_TYPE
  214. #define AXIS5_NAME 'B' // :['B', 'C', 'U', 'V', 'W']
  215. #define AXIS5_ROTATES
  216. #endif
  217. #ifdef K_DRIVER_TYPE
  218. #define AXIS6_NAME 'C' // :['C', 'U', 'V', 'W']
  219. #define AXIS6_ROTATES
  220. #endif
  221. #ifdef U_DRIVER_TYPE
  222. #define AXIS7_NAME 'U' // :['U', 'V', 'W']
  223. //#define AXIS7_ROTATES
  224. #endif
  225. #ifdef V_DRIVER_TYPE
  226. #define AXIS8_NAME 'V' // :['V', 'W']
  227. //#define AXIS8_ROTATES
  228. #endif
  229. #ifdef W_DRIVER_TYPE
  230. #define AXIS9_NAME 'W' // :['W']
  231. //#define AXIS9_ROTATES
  232. #endif
  233.  
  234. // @section extruder
  235.  
  236. // This defines the number of extruders
  237. // :[0, 1, 2, 3, 4, 5, 6, 7, 8]
  238. #define EXTRUDERS 1
  239.  
  240. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  241. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
  242.  
  243. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  244. //#define SINGLENOZZLE
  245.  
  246. // Save and restore temperature and fan speed on tool-change.
  247. // Set standby for the unselected tool with M104/106/109 T...
  248. #if ENABLED(SINGLENOZZLE)
  249. //#define SINGLENOZZLE_STANDBY_TEMP
  250. //#define SINGLENOZZLE_STANDBY_FAN
  251. #endif
  252.  
  253. // A dual extruder that uses a single stepper motor
  254. //#define SWITCHING_EXTRUDER
  255. #if ENABLED(SWITCHING_EXTRUDER)
  256. #define SWITCHING_EXTRUDER_SERVO_NR 0
  257. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  258. #if EXTRUDERS > 3
  259. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  260. #endif
  261. #endif
  262.  
  263. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  264. //#define SWITCHING_NOZZLE
  265. #if ENABLED(SWITCHING_NOZZLE)
  266. #define SWITCHING_NOZZLE_SERVO_NR 0
  267. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  268. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // A pair of angles for { E0, E1 }.
  269. // For Dual Servo use two pairs: { { lower, raise }, { lower, raise } }
  270. #define SWITCHING_NOZZLE_SERVO_DWELL 2500 // Dwell time to wait for servo to make physical move
  271. #endif
  272.  
  273. /**
  274. * Two separate X-carriages with extruders that connect to a moving part
  275. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  276. */
  277. //#define PARKING_EXTRUDER
  278.  
  279. /**
  280. * Two separate X-carriages with extruders that connect to a moving part
  281. * via a magnetic docking mechanism using movements and no solenoid
  282. *
  283. * project : https://www.thingiverse.com/thing:3080893
  284. * movements : https://youtu.be/0xCEiG9VS3k
  285. * https://youtu.be/Bqbcs0CU2FE
  286. */
  287. //#define MAGNETIC_PARKING_EXTRUDER
  288.  
  289. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  290.  
  291. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  292. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  293.  
  294. #if ENABLED(PARKING_EXTRUDER)
  295.  
  296. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  297. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  298. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  299. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  300.  
  301. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  302.  
  303. #define MPE_FAST_SPEED 9000 // (mm/min) Speed for travel before last distance point
  304. #define MPE_SLOW_SPEED 4500 // (mm/min) Speed for last distance travel to park and couple
  305. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  306. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  307.  
  308. #endif
  309.  
  310. #endif
  311.  
  312. /**
  313. * Switching Toolhead
  314. *
  315. * Support for swappable and dockable toolheads, such as
  316. * the E3D Tool Changer. Toolheads are locked with a servo.
  317. */
  318. //#define SWITCHING_TOOLHEAD
  319.  
  320. /**
  321. * Magnetic Switching Toolhead
  322. *
  323. * Support swappable and dockable toolheads with a magnetic
  324. * docking mechanism using movement and no servo.
  325. */
  326. //#define MAGNETIC_SWITCHING_TOOLHEAD
  327.  
  328. /**
  329. * Electromagnetic Switching Toolhead
  330. *
  331. * Parking for CoreXY / HBot kinematics.
  332. * Toolheads are parked at one edge and held with an electromagnet.
  333. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  334. */
  335. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  336.  
  337. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  338. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  339. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  340. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  341. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  342. #if ENABLED(SWITCHING_TOOLHEAD)
  343. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  344. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  345. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  346. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  347. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  348. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  349. #if ENABLED(PRIME_BEFORE_REMOVE)
  350. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  351. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  352. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/min) Extruder prime feedrate
  353. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/min) Extruder retract feedrate
  354. #endif
  355. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  356. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  357. #endif
  358. #endif
  359.  
  360. /**
  361. * "Mixing Extruder"
  362. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  363. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  364. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  365. * - This implementation supports up to two mixing extruders.
  366. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  367. */
  368. //#define MIXING_EXTRUDER
  369. #if ENABLED(MIXING_EXTRUDER)
  370. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  371. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  372. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  373. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  374. //#define MIXING_PRESETS // Assign 8 default V-tool presets for 2 or 3 MIXING_STEPPERS
  375. #if ENABLED(GRADIENT_MIX)
  376. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  377. #endif
  378. #endif
  379.  
  380. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  381. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  382. // For the other hotends it is their distance from the extruder 0 hotend.
  383. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  384. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  385. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  386.  
  387. // @section multi-material
  388.  
  389. /**
  390. * Multi-Material Unit
  391. * Set to one of these predefined models:
  392. *
  393. * PRUSA_MMU1 : Průša MMU1 (The "multiplexer" version)
  394. * PRUSA_MMU2 : Průša MMU2
  395. * PRUSA_MMU2S : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
  396. * EXTENDABLE_EMU_MMU2 : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  397. * EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  398. *
  399. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  400. * See additional options in Configuration_adv.h.
  401. * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  402. */
  403. //#define MMU_MODEL PRUSA_MMU2
  404.  
  405. // @section psu control
  406.  
  407. /**
  408. * Power Supply Control
  409. *
  410. * Enable and connect the power supply to the PS_ON_PIN.
  411. * Specify whether the power supply is active HIGH or active LOW.
  412. */
  413. //#define PSU_CONTROL
  414. //#define PSU_NAME "Power Supply"
  415.  
  416. #if ENABLED(PSU_CONTROL)
  417. //#define MKS_PWC // Using the MKS PWC add-on
  418. //#define PS_OFF_CONFIRM // Confirm dialog when power off
  419. //#define PS_OFF_SOUND // Beep 1s when power off
  420. #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box
  421.  
  422. //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
  423. //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power
  424. //#define LED_POWEROFF_TIMEOUT 10000 // (ms) Turn off LEDs after power-off, with this amount of delay
  425.  
  426. //#define POWER_OFF_TIMER // Enable M81 D<seconds> to power off after a delay
  427. //#define POWER_OFF_WAIT_FOR_COOLDOWN // Enable M81 S to power off only after cooldown
  428.  
  429. //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on)
  430. //#define PSU_POWEROFF_GCODE "M355 S0" // G-code to run before power-off (e.g., case light off)
  431.  
  432. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  433. #if ENABLED(AUTO_POWER_CONTROL)
  434. #define AUTO_POWER_FANS // Turn on PSU for fans
  435. #define AUTO_POWER_E_FANS // Turn on PSU for E Fans
  436. #define AUTO_POWER_CONTROLLERFAN // Turn on PSU for Controller Fan
  437. #define AUTO_POWER_CHAMBER_FAN // Turn on PSU for Chamber Fan
  438. #define AUTO_POWER_COOLER_FAN // Turn on PSU for Cooler Fan
  439. #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
  440. //#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
  441. #endif
  442. #if EITHER(AUTO_POWER_CONTROL, POWER_OFF_WAIT_FOR_COOLDOWN)
  443. //#define AUTO_POWER_E_TEMP 50 // (°C) PSU on if any extruder is over this temperature
  444. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) PSU on if the chamber is over this temperature
  445. //#define AUTO_POWER_COOLER_TEMP 26 // (°C) PSU on if the cooler is over this temperature
  446. #endif
  447. #endif
  448.  
  449. //===========================================================================
  450. //============================= Thermal Settings ============================
  451. //===========================================================================
  452. // @section temperature
  453.  
  454. /**
  455. * Temperature Sensors:
  456. *
  457. * NORMAL IS 4.7kΩ PULLUP! Hotend sensors can use 1kΩ pullup with correct resistor and table.
  458. *
  459. * ================================================================
  460. * Analog Thermistors - 4.7kΩ pullup - Normal
  461. * ================================================================
  462. * 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors
  463. * 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA
  464. * 332 : 100kΩ Same as #1, but 3.3V scaled for DUE
  465. * 2 : 200kΩ ATC Semitec 204GT-2
  466. * 202 : 200kΩ Copymaster 3D
  467. * 3 : ???Ω Mendel-parts thermistor
  468. * 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
  469. * 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
  470. * 501 : 100kΩ Zonestar - Tronxy X3A
  471. * 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M
  472. * 503 : 100kΩ Zonestar (Z8XM2) Heated Bed thermistor
  473. * 504 : 100kΩ Zonestar P802QR2 (Part# QWG-104F-B3950) Hotend Thermistor
  474. * 505 : 100kΩ Zonestar P802QR2 (Part# QWG-104F-3950) Bed Thermistor
  475. * 512 : 100kΩ RPW-Ultra hotend
  476. * 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
  477. * 7 : 100kΩ Honeywell 135-104LAG-J01
  478. * 71 : 100kΩ Honeywell 135-104LAF-J01
  479. * 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT
  480. * 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1
  481. * 10 : 100kΩ RS PRO 198-961
  482. * 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
  483. * 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
  484. * 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
  485. * 14 : 100kΩ (R25), 4092K (beta25), 4.7kΩ pull-up, bed thermistor as used in Ender-5 S1
  486. * 15 : 100kΩ Calibrated for JGAurora A5 hotend
  487. * 17 : 100kΩ Dagoma NTC white thermistor
  488. * 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
  489. * 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
  490. * 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
  491. * 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
  492. * 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950
  493. * 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950
  494. * 66 : 4.7MΩ Dyze Design / Trianglelab T-D500 500°C High Temperature Thermistor
  495. * 67 : 500kΩ SliceEngineering 450°C Thermistor
  496. * 68 : PT100 Smplifier board from Dyze Design
  497. * 70 : 100kΩ bq Hephestos 2
  498. * 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
  499. * 666 : 200kΩ Einstart S custom thermistor with 10k pullup.
  500. * 2000 : 100kΩ Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor
  501. *
  502. * ================================================================
  503. * Analog Thermistors - 1kΩ pullup
  504. * Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
  505. * (but gives greater accuracy and more stable PID)
  506. * ================================================================
  507. * 51 : 100kΩ EPCOS (1kΩ pullup)
  508. * 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)
  509. * 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
  510. *
  511. * ================================================================
  512. * Analog Thermistors - 10kΩ pullup - Atypical
  513. * ================================================================
  514. * 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
  515. *
  516. * ================================================================
  517. * Analog RTDs (Pt100/Pt1000)
  518. * ================================================================
  519. * 110 : Pt100 with 1kΩ pullup (atypical)
  520. * 147 : Pt100 with 4.7kΩ pullup
  521. * 1010 : Pt1000 with 1kΩ pullup (atypical)
  522. * 1022 : Pt1000 with 2.2kΩ pullup
  523. * 1047 : Pt1000 with 4.7kΩ pullup (E3D)
  524. * 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
  525. * NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
  526. * 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
  527. * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
  528. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  529. *
  530. * ================================================================
  531. * SPI RTD/Thermocouple Boards
  532. * ================================================================
  533. * -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire (only for sensors 0-2 and bed)
  534. * NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
  535. * -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-2 and bed)
  536. * -2 : MAX6675 with Thermocouple, 0°C to +700°C (only for sensors 0-2 and bed)
  537. *
  538. * NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
  539. * Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
  540. * Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
  541. * Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
  542. *
  543. * ================================================================
  544. * Analog Thermocouple Boards
  545. * ================================================================
  546. * -4 : AD8495 with Thermocouple
  547. * -1 : AD595 with Thermocouple
  548. *
  549. * ================================================================
  550. * Custom/Dummy/Other Thermal Sensors
  551. * ================================================================
  552. * 0 : not used
  553. * 1000 : Custom - Specify parameters in Configuration_adv.h
  554. *
  555. * !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
  556. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  557. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  558. */
  559. #define TEMP_SENSOR_0 1
  560. #define TEMP_SENSOR_1 0
  561. #define TEMP_SENSOR_2 0
  562. #define TEMP_SENSOR_3 0
  563. #define TEMP_SENSOR_4 0
  564. #define TEMP_SENSOR_5 0
  565. #define TEMP_SENSOR_6 0
  566. #define TEMP_SENSOR_7 0
  567. #define TEMP_SENSOR_BED 1
  568. #define TEMP_SENSOR_PROBE 0
  569. #define TEMP_SENSOR_CHAMBER 0
  570. #define TEMP_SENSOR_COOLER 0
  571. #define TEMP_SENSOR_BOARD 0
  572. #define TEMP_SENSOR_REDUNDANT 0
  573.  
  574. // Dummy thermistor constant temperature readings, for use with 998 and 999
  575. #define DUMMY_THERMISTOR_998_VALUE 25
  576. #define DUMMY_THERMISTOR_999_VALUE 100
  577.  
  578. // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
  579. #if TEMP_SENSOR_IS_MAX_TC(0)
  580. #define MAX31865_SENSOR_OHMS_0 100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
  581. #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
  582. #endif
  583. #if TEMP_SENSOR_IS_MAX_TC(1)
  584. #define MAX31865_SENSOR_OHMS_1 100
  585. #define MAX31865_CALIBRATION_OHMS_1 430
  586. #endif
  587. #if TEMP_SENSOR_IS_MAX_TC(2)
  588. #define MAX31865_SENSOR_OHMS_2 100
  589. #define MAX31865_CALIBRATION_OHMS_2 430
  590. #endif
  591.  
  592. #if HAS_E_TEMP_SENSOR
  593. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  594. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  595. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  596. #endif
  597.  
  598. #if TEMP_SENSOR_BED
  599. #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
  600. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  601. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  602. #endif
  603.  
  604. #if TEMP_SENSOR_CHAMBER
  605. #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191
  606. #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  607. #define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  608. #endif
  609.  
  610. /**
  611. * Redundant Temperature Sensor (TEMP_SENSOR_REDUNDANT)
  612. *
  613. * Use a temp sensor as a redundant sensor for another reading. Select an unused temperature sensor, and another
  614. * sensor you'd like it to be redundant for. If the two thermistors differ by TEMP_SENSOR_REDUNDANT_MAX_DIFF (°C),
  615. * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
  616. * the Bed sensor (-1) will disable bed heating/monitoring.
  617. *
  618. * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
  619. */
  620. #if TEMP_SENSOR_REDUNDANT
  621. #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
  622. #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
  623. #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
  624. #endif
  625.  
  626. // Below this temperature the heater will be switched off
  627. // because it probably indicates a broken thermistor wire.
  628. #define HEATER_0_MINTEMP 5
  629. #define HEATER_1_MINTEMP 5
  630. #define HEATER_2_MINTEMP 5
  631. #define HEATER_3_MINTEMP 5
  632. #define HEATER_4_MINTEMP 5
  633. #define HEATER_5_MINTEMP 5
  634. #define HEATER_6_MINTEMP 5
  635. #define HEATER_7_MINTEMP 5
  636. #define BED_MINTEMP 5
  637. #define CHAMBER_MINTEMP 5
  638.  
  639. // Above this temperature the heater will be switched off.
  640. // This can protect components from overheating, but NOT from shorts and failures.
  641. // (Use MINTEMP for thermistor short/failure protection.)
  642. #define HEATER_0_MAXTEMP 275
  643. #define HEATER_1_MAXTEMP 275
  644. #define HEATER_2_MAXTEMP 275
  645. #define HEATER_3_MAXTEMP 275
  646. #define HEATER_4_MAXTEMP 275
  647. #define HEATER_5_MAXTEMP 275
  648. #define HEATER_6_MAXTEMP 275
  649. #define HEATER_7_MAXTEMP 275
  650. #define BED_MAXTEMP 120
  651. #define CHAMBER_MAXTEMP 60
  652.  
  653. /**
  654. * Thermal Overshoot
  655. * During heatup (and printing) the temperature can often "overshoot" the target by many degrees
  656. * (especially before PID tuning). Setting the target temperature too close to MAXTEMP guarantees
  657. * a MAXTEMP shutdown! Use these values to forbid temperatures being set too close to MAXTEMP.
  658. */
  659. #define HOTEND_OVERSHOOT 15 // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
  660. #define BED_OVERSHOOT 10 // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
  661. #define COOLER_OVERSHOOT 2 // (°C) Forbid temperatures closer than OVERSHOOT
  662.  
  663. //===========================================================================
  664. //============================= PID Settings ================================
  665. //===========================================================================
  666.  
  667. // @section hotend temp
  668.  
  669. /**
  670. * Temperature Control
  671. *
  672. * (NONE) : Bang-bang heating
  673. * PIDTEMP : PID temperature control (~4.1K)
  674. * MPCTEMP : Predictive Model temperature control. (~1.8K without auto-tune)
  675. */
  676. #define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
  677. //#define MPCTEMP // See https://marlinfw.org/docs/features/model_predictive_control.html
  678.  
  679. #define PID_MAX 255 // Limit hotend current while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  680. #define PID_K1 0.95 // Smoothing factor within any PID loop
  681.  
  682. #if ENABLED(PIDTEMP)
  683. //#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
  684. //#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
  685. // Set/get with G-code: M301 E[extruder number, 0-2]
  686.  
  687. // BIQU B1
  688. #if ENABLED(PID_PARAMS_PER_HOTEND)
  689. // Specify up to one value per hotend here, according to your setup.
  690. // If there are fewer values, the last one applies to the remaining hotends.
  691. #define DEFAULT_Kp_LIST { 23.34, 23.34 }
  692. #define DEFAULT_Ki_LIST { 1.85, 1.85 }
  693. #define DEFAULT_Kd_LIST { 73.55, 73.55 }
  694. #else
  695. #define DEFAULT_Kp 21.73
  696. #define DEFAULT_Ki 1.54
  697. #define DEFAULT_Kd 76.55
  698. #endif
  699. #else
  700. #define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
  701. #endif
  702.  
  703. /**
  704. * Model Predictive Control for hotend
  705. *
  706. * Use a physical model of the hotend to control temperature. When configured correctly this gives
  707. * better responsiveness and stability than PID and removes the need for PID_EXTRUSION_SCALING
  708. * and PID_FAN_SCALING. Use M306 T to autotune the model.
  709. * @section mpctemp
  710. */
  711. #if ENABLED(MPCTEMP)
  712. //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1.3K bytes of flash)
  713. //#define MPC_AUTOTUNE_MENU // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash)
  714.  
  715. #define MPC_MAX 255 // (0..255) Current to nozzle while MPC is active.
  716. #define MPC_HEATER_POWER { 40.0f } // (W) Heat cartridge powers.
  717.  
  718. #define MPC_INCLUDE_FAN // Model the fan speed?
  719.  
  720. // Measured physical constants from M306
  721. #define MPC_BLOCK_HEAT_CAPACITY { 16.7f } // (J/K) Heat block heat capacities.
  722. #define MPC_SENSOR_RESPONSIVENESS { 0.22f } // (K/s per ∆K) Rate of change of sensor temperature from heat block.
  723. #define MPC_AMBIENT_XFER_COEFF { 0.068f } // (W/K) Heat transfer coefficients from heat block to room air with fan off.
  724. #if ENABLED(MPC_INCLUDE_FAN)
  725. #define MPC_AMBIENT_XFER_COEFF_FAN255 { 0.097f } // (W/K) Heat transfer coefficients from heat block to room air with fan on full.
  726. #endif
  727.  
  728. // For one fan and multiple hotends MPC needs to know how to apply the fan cooling effect.
  729. #if ENABLED(MPC_INCLUDE_FAN)
  730. //#define MPC_FAN_0_ALL_HOTENDS
  731. //#define MPC_FAN_0_ACTIVE_HOTEND
  732. #endif
  733.  
  734. // Filament Heat Capacity (joules/kelvin/mm)
  735. // Set at runtime with M306 H<value>
  736. #define FILAMENT_HEAT_CAPACITY_PERMM { 5.6e-3f } // 0.0056 J/K/mm for 1.75mm PLA (0.0149 J/K/mm for 2.85mm PLA).
  737. // 0.0036 J/K/mm for 1.75mm PETG (0.0094 J/K/mm for 2.85mm PETG).
  738. // 0.00515 J/K/mm for 1.75mm ABS (0.0137 J/K/mm for 2.85mm ABS).
  739. // 0.00522 J/K/mm for 1.75mm Nylon (0.0138 J/K/mm for 2.85mm Nylon).
  740.  
  741. // Advanced options
  742. #define MPC_SMOOTHING_FACTOR 0.5f // (0.0...1.0) Noisy temperature sensors may need a lower value for stabilization.
  743. #define MPC_MIN_AMBIENT_CHANGE 1.0f // (K/s) Modeled ambient temperature rate of change, when correcting model inaccuracies.
  744. #define MPC_STEADYSTATE 0.5f // (K/s) Temperature change rate for steady state logic to be enforced.
  745.  
  746. #define MPC_TUNING_POS { X_CENTER, Y_CENTER, 1.0f } // (mm) M306 Autotuning position, ideally bed center at first layer height.
  747. #define MPC_TUNING_END_Z 10.0f // (mm) M306 Autotuning final Z position.
  748. #endif
  749.  
  750. //===========================================================================
  751. //====================== PID > Bed Temperature Control ======================
  752. //===========================================================================
  753.  
  754. // @section bed temp
  755.  
  756. /**
  757. * Max Bed Power
  758. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  759. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  760. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  761. */
  762. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  763.  
  764. /**
  765. * PID Bed Heating
  766. *
  767. * The PID frequency will be the same as the extruder PWM.
  768. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  769. * which is fine for driving a square wave into a resistive load and does not significantly
  770. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  771. * heater. If your configuration is significantly different than this and you don't understand
  772. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  773. *
  774. * With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
  775. */
  776. #define PIDTEMPBED
  777.  
  778. #if ENABLED(PIDTEMPBED)
  779. //#define MIN_BED_POWER 0
  780. //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
  781.  
  782. // BIQU B1
  783. #define DEFAULT_bedKp 100.65
  784. #define DEFAULT_bedKi 14.82
  785. #define DEFAULT_bedKd 455.69
  786.  
  787. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  788. #else
  789. //#define BED_LIMIT_SWITCHING // Keep the bed temperature within BED_HYSTERESIS of the target
  790. #endif
  791.  
  792. //===========================================================================
  793. //==================== PID > Chamber Temperature Control ====================
  794. //===========================================================================
  795.  
  796. /**
  797. * PID Chamber Heating
  798. *
  799. * If this option is enabled set PID constants below.
  800. * If this option is disabled, bang-bang will be used and CHAMBER_LIMIT_SWITCHING will enable
  801. * hysteresis.
  802. *
  803. * The PID frequency will be the same as the extruder PWM.
  804. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  805. * which is fine for driving a square wave into a resistive load and does not significantly
  806. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
  807. * heater. If your configuration is significantly different than this and you don't understand
  808. * the issues involved, don't use chamber PID until someone else verifies that your hardware works.
  809. * @section chamber temp
  810. */
  811. //#define PIDTEMPCHAMBER
  812. //#define CHAMBER_LIMIT_SWITCHING
  813.  
  814. /**
  815. * Max Chamber Power
  816. * Applies to all forms of chamber control (PID, bang-bang, and bang-bang with hysteresis).
  817. * When set to any value below 255, enables a form of PWM to the chamber heater that acts like a divider
  818. * so don't use it unless you are OK with PWM on your heater. (See the comment on enabling PIDTEMPCHAMBER)
  819. */
  820. #define MAX_CHAMBER_POWER 255 // limits duty cycle to chamber heater; 255=full current
  821.  
  822. #if ENABLED(PIDTEMPCHAMBER)
  823. #define MIN_CHAMBER_POWER 0
  824. //#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
  825.  
  826. // Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
  827. // and placed inside the small Creality printer enclosure tent.
  828. //
  829. #define DEFAULT_chamberKp 37.04
  830. #define DEFAULT_chamberKi 1.40
  831. #define DEFAULT_chamberKd 655.17
  832. // M309 P37.04 I1.04 D655.17
  833.  
  834. // FIND YOUR OWN: "M303 E-2 C8 S50" to run autotune on the chamber at 50 degreesC for 8 cycles.
  835. #endif // PIDTEMPCHAMBER
  836.  
  837. // @section pid temp
  838.  
  839. #if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
  840. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  841. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  842. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  843. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  844.  
  845. #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
  846. #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
  847. #endif
  848.  
  849. // @section safety
  850.  
  851. /**
  852. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  853. * Add M302 to set the minimum extrusion temperature and/or turn
  854. * cold extrusion prevention on and off.
  855. *
  856. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  857. */
  858. #define PREVENT_COLD_EXTRUSION
  859. #define EXTRUDE_MINTEMP 170
  860.  
  861. /**
  862. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  863. * Note: For Bowden Extruders make this large enough to allow load/unload.
  864. */
  865. #define PREVENT_LENGTHY_EXTRUDE
  866. #define EXTRUDE_MAXLENGTH 500
  867.  
  868. //===========================================================================
  869. //======================== Thermal Runaway Protection =======================
  870. //===========================================================================
  871.  
  872. /**
  873. * Thermal Protection provides additional protection to your printer from damage
  874. * and fire. Marlin always includes safe min and max temperature ranges which
  875. * protect against a broken or disconnected thermistor wire.
  876. *
  877. * The issue: If a thermistor falls out, it will report the much lower
  878. * temperature of the air in the room, and the the firmware will keep
  879. * the heater on.
  880. *
  881. * If you get "Thermal Runaway" or "Heating failed" errors the
  882. * details can be tuned in Configuration_adv.h
  883. */
  884.  
  885. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  886. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  887. #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  888. #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
  889.  
  890. //===========================================================================
  891. //============================= Mechanical Settings =========================
  892. //===========================================================================
  893.  
  894. // @section kinematics
  895.  
  896. // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
  897. // either in the usual order or reversed
  898. //#define COREXY
  899. //#define COREXZ
  900. //#define COREYZ
  901. //#define COREYX
  902. //#define COREZX
  903. //#define COREZY
  904.  
  905. //
  906. // MarkForged Kinematics
  907. // See https://reprap.org/forum/read.php?152,504042
  908. //
  909. //#define MARKFORGED_XY
  910. //#define MARKFORGED_YX
  911.  
  912. // Enable for a belt style printer with endless "Z" motion
  913. //#define BELTPRINTER
  914.  
  915. // Enable for Polargraph Kinematics
  916. //#define POLARGRAPH
  917. #if ENABLED(POLARGRAPH)
  918. #define POLARGRAPH_MAX_BELT_LEN 1035.0 // (mm) Belt length at full extension. Override with M665 H.
  919. #define DEFAULT_SEGMENTS_PER_SECOND 5 // Move segmentation based on duration
  920. #endif
  921.  
  922. // @section delta
  923.  
  924. // Enable for DELTA kinematics and configure below
  925. //#define DELTA
  926. #if ENABLED(DELTA)
  927.  
  928. // Make delta curves from many straight lines (linear interpolation).
  929. // This is a trade-off between visible corners (not enough segments)
  930. // and processor overload (too many expensive sqrt calls).
  931. #define DEFAULT_SEGMENTS_PER_SECOND 200
  932.  
  933. // After homing move down to a height where XY movement is unconstrained
  934. //#define DELTA_HOME_TO_SAFE_ZONE
  935.  
  936. // Delta calibration menu
  937. // Add three-point calibration to the MarlinUI menu.
  938. // See http://minow.blogspot.com/index.html#4918805519571907051
  939. //#define DELTA_CALIBRATION_MENU
  940.  
  941. // G33 Delta Auto-Calibration. Enable EEPROM_SETTINGS to store results.
  942. //#define DELTA_AUTO_CALIBRATION
  943.  
  944. #if ENABLED(DELTA_AUTO_CALIBRATION)
  945. // Default number of probe points : n*n (1 -> 7)
  946. #define DELTA_CALIBRATION_DEFAULT_POINTS 4
  947. #endif
  948.  
  949. #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
  950. // Step size for paper-test probing
  951. #define PROBE_MANUALLY_STEP 0.05 // (mm)
  952. #endif
  953.  
  954. // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
  955. #define DELTA_PRINTABLE_RADIUS 140.0 // (mm)
  956.  
  957. // Maximum reachable area
  958. #define DELTA_MAX_RADIUS 140.0 // (mm)
  959.  
  960. // Center-to-center distance of the holes in the diagonal push rods.
  961. #define DELTA_DIAGONAL_ROD 250.0 // (mm)
  962.  
  963. // Distance between bed and nozzle Z home position
  964. #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate
  965.  
  966. #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // (mm) Get these values from G33 auto calibrate
  967.  
  968. // Horizontal distance bridged by diagonal push rods when effector is centered.
  969. #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate
  970.  
  971. // Trim adjustments for individual towers
  972. // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  973. // measured in degrees anticlockwise looking from above the printer
  974. #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // (mm) Get these values from G33 auto calibrate
  975.  
  976. // Delta radius and diagonal rod adjustments
  977. //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } // (mm)
  978. //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } // (mm)
  979. #endif
  980.  
  981. // @section scara
  982.  
  983. /**
  984. * MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013.
  985. * Implemented and slightly reworked by JCERNY in June, 2014.
  986. *
  987. * Mostly Printed SCARA is an open source design by Tyler Williams. See:
  988. * https://www.thingiverse.com/thing:2487048
  989. * https://www.thingiverse.com/thing:1241491
  990. */
  991. //#define MORGAN_SCARA
  992. //#define MP_SCARA
  993. #if EITHER(MORGAN_SCARA, MP_SCARA)
  994. // If movement is choppy try lowering this value
  995. #define DEFAULT_SEGMENTS_PER_SECOND 200
  996.  
  997. // Length of inner and outer support arms. Measure arm lengths precisely.
  998. #define SCARA_LINKAGE_1 150 // (mm)
  999. #define SCARA_LINKAGE_2 150 // (mm)
  1000.  
  1001. // SCARA tower offset (position of Tower relative to bed zero position)
  1002. // This needs to be reasonably accurate as it defines the printbed position in the SCARA space.
  1003. #define SCARA_OFFSET_X 100 // (mm)
  1004. #define SCARA_OFFSET_Y -56 // (mm)
  1005.  
  1006. #if ENABLED(MORGAN_SCARA)
  1007.  
  1008. //#define DEBUG_SCARA_KINEMATICS
  1009. #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
  1010.  
  1011. // Radius around the center where the arm cannot reach
  1012. #define MIDDLE_DEAD_ZONE_R 0 // (mm)
  1013.  
  1014. #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
  1015. #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
  1016.  
  1017. #elif ENABLED(MP_SCARA)
  1018.  
  1019. #define SCARA_OFFSET_THETA1 12 // degrees
  1020. #define SCARA_OFFSET_THETA2 131 // degrees
  1021.  
  1022. #endif
  1023.  
  1024. #endif
  1025.  
  1026. // @section tpara
  1027.  
  1028. // Enable for TPARA kinematics and configure below
  1029. //#define AXEL_TPARA
  1030. #if ENABLED(AXEL_TPARA)
  1031. #define DEBUG_TPARA_KINEMATICS
  1032. #define DEFAULT_SEGMENTS_PER_SECOND 200
  1033.  
  1034. // Length of inner and outer support arms. Measure arm lengths precisely.
  1035. #define TPARA_LINKAGE_1 120 // (mm)
  1036. #define TPARA_LINKAGE_2 120 // (mm)
  1037.  
  1038. // TPARA tower offset (position of Tower relative to bed zero position)
  1039. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
  1040. #define TPARA_OFFSET_X 0 // (mm)
  1041. #define TPARA_OFFSET_Y 0 // (mm)
  1042. #define TPARA_OFFSET_Z 0 // (mm)
  1043.  
  1044. #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
  1045.  
  1046. // Radius around the center where the arm cannot reach
  1047. #define MIDDLE_DEAD_ZONE_R 0 // (mm)
  1048. #endif
  1049.  
  1050. // @section machine
  1051.  
  1052. // Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
  1053. //#define ARTICULATED_ROBOT_ARM
  1054.  
  1055. // For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
  1056. // ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
  1057. //#define FOAMCUTTER_XYUV
  1058.  
  1059. //===========================================================================
  1060. //============================== Endstop Settings ===========================
  1061. //===========================================================================
  1062.  
  1063. // @section endstops
  1064.  
  1065. // Specify here all the endstop connectors that are connected to any endstop or probe.
  1066. // Almost all printers will be using one per axis. Probes will use one or more of the
  1067. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  1068. #define USE_XMIN_PLUG
  1069. #define USE_YMIN_PLUG
  1070. #define USE_ZMIN_PLUG
  1071. //#define USE_IMIN_PLUG
  1072. //#define USE_JMIN_PLUG
  1073. //#define USE_KMIN_PLUG
  1074. //#define USE_UMIN_PLUG
  1075. //#define USE_VMIN_PLUG
  1076. //#define USE_WMIN_PLUG
  1077. //#define USE_XMAX_PLUG
  1078. //#define USE_YMAX_PLUG
  1079. //#define USE_ZMAX_PLUG
  1080. //#define USE_IMAX_PLUG
  1081. //#define USE_JMAX_PLUG
  1082. //#define USE_KMAX_PLUG
  1083. //#define USE_UMAX_PLUG
  1084. //#define USE_VMAX_PLUG
  1085. //#define USE_WMAX_PLUG
  1086.  
  1087. // Enable pullup for all endstops to prevent a floating state
  1088. #define ENDSTOPPULLUPS
  1089. #if DISABLED(ENDSTOPPULLUPS)
  1090. // Disable ENDSTOPPULLUPS to set pullups individually
  1091. //#define ENDSTOPPULLUP_XMIN
  1092. //#define ENDSTOPPULLUP_YMIN
  1093. //#define ENDSTOPPULLUP_ZMIN
  1094. //#define ENDSTOPPULLUP_IMIN
  1095. //#define ENDSTOPPULLUP_JMIN
  1096. //#define ENDSTOPPULLUP_KMIN
  1097. //#define ENDSTOPPULLUP_UMIN
  1098. //#define ENDSTOPPULLUP_VMIN
  1099. //#define ENDSTOPPULLUP_WMIN
  1100. //#define ENDSTOPPULLUP_XMAX
  1101. //#define ENDSTOPPULLUP_YMAX
  1102. //#define ENDSTOPPULLUP_ZMAX
  1103. //#define ENDSTOPPULLUP_IMAX
  1104. //#define ENDSTOPPULLUP_JMAX
  1105. //#define ENDSTOPPULLUP_KMAX
  1106. //#define ENDSTOPPULLUP_UMAX
  1107. //#define ENDSTOPPULLUP_VMAX
  1108. //#define ENDSTOPPULLUP_WMAX
  1109. //#define ENDSTOPPULLUP_ZMIN_PROBE
  1110. #endif
  1111.  
  1112. // Enable pulldown for all endstops to prevent a floating state
  1113. //#define ENDSTOPPULLDOWNS
  1114. #if DISABLED(ENDSTOPPULLDOWNS)
  1115. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  1116. //#define ENDSTOPPULLDOWN_XMIN
  1117. //#define ENDSTOPPULLDOWN_YMIN
  1118. //#define ENDSTOPPULLDOWN_ZMIN
  1119. //#define ENDSTOPPULLDOWN_IMIN
  1120. //#define ENDSTOPPULLDOWN_JMIN
  1121. //#define ENDSTOPPULLDOWN_KMIN
  1122. //#define ENDSTOPPULLDOWN_UMIN
  1123. //#define ENDSTOPPULLDOWN_VMIN
  1124. //#define ENDSTOPPULLDOWN_WMIN
  1125. //#define ENDSTOPPULLDOWN_XMAX
  1126. //#define ENDSTOPPULLDOWN_YMAX
  1127. //#define ENDSTOPPULLDOWN_ZMAX
  1128. //#define ENDSTOPPULLDOWN_IMAX
  1129. //#define ENDSTOPPULLDOWN_JMAX
  1130. //#define ENDSTOPPULLDOWN_KMAX
  1131. //#define ENDSTOPPULLDOWN_UMAX
  1132. //#define ENDSTOPPULLDOWN_VMAX
  1133. //#define ENDSTOPPULLDOWN_WMAX
  1134. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  1135. #endif
  1136.  
  1137. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  1138. #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  1139. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  1140. #ifdef B1_USE_BLTOUCH
  1141. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1142. #else
  1143. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  1144. #endif
  1145. #define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1146. #define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1147. #define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1148. #define U_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1149. #define V_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1150. #define W_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1151. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1152. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1153. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1154. #define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1155. #define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1156. #define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1157. #define U_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1158. #define V_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1159. #define W_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  1160. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
  1161.  
  1162. // Enable this feature if all enabled endstop pins are interrupt-capable.
  1163. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  1164. //#define ENDSTOP_INTERRUPTS_FEATURE
  1165.  
  1166. /**
  1167. * Endstop Noise Threshold
  1168. *
  1169. * Enable if your probe or endstops falsely trigger due to noise.
  1170. *
  1171. * - Higher values may affect repeatability or accuracy of some bed probes.
  1172. * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  1173. * - This feature is not required for common micro-switches mounted on PCBs
  1174. * based on the Makerbot design, which already have the 100nF capacitor.
  1175. *
  1176. * :[2,3,4,5,6,7]
  1177. */
  1178. #define ENDSTOP_NOISE_THRESHOLD 4
  1179.  
  1180. // Check for stuck or disconnected endstops during homing moves.
  1181. //#define DETECT_BROKEN_ENDSTOP
  1182.  
  1183. //=============================================================================
  1184. //============================== Movement Settings ============================
  1185. //=============================================================================
  1186. // @section motion
  1187.  
  1188. /**
  1189. * Default Settings
  1190. *
  1191. * These settings can be reset by M502
  1192. *
  1193. * Note that if EEPROM is enabled, saved values will override these.
  1194. */
  1195.  
  1196. /**
  1197. * With this option each E stepper can have its own factors for the
  1198. * following movement settings. If fewer factors are given than the
  1199. * total number of extruders, the last value applies to the rest.
  1200. */
  1201. //#define DISTINCT_E_FACTORS
  1202.  
  1203. /**
  1204. * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
  1205. * Override with M92
  1206. * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  1207. */
  1208. #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95.24 }
  1209.  
  1210. /**
  1211. * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  1212. * Override with M203
  1213. * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  1214. */
  1215. #define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
  1216.  
  1217. //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
  1218. #if ENABLED(LIMITED_MAX_FR_EDITING)
  1219. #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
  1220. #endif
  1221.  
  1222. /**
  1223. * Default Max Acceleration (speed change with time) (linear=mm/(s^2), rotational=°/(s^2))
  1224. * (Maximum start speed for accelerated moves)
  1225. * Override with M201
  1226. * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  1227. */
  1228. #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 500 }
  1229.  
  1230. //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
  1231. #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
  1232. #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits
  1233. #endif
  1234.  
  1235. /**
  1236. * Default Acceleration (speed change with time) (linear=mm/(s^2), rotational=°/(s^2))
  1237. * Override with M204
  1238. *
  1239. * M204 P Acceleration
  1240. * M204 R Retract Acceleration
  1241. * M204 T Travel Acceleration
  1242. */
  1243. #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
  1244. #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
  1245. #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
  1246.  
  1247. /**
  1248. * Default Jerk limits (mm/s)
  1249. * Override with M205 X Y Z . . . E
  1250. *
  1251. * "Jerk" specifies the minimum speed change that requires acceleration.
  1252. * When changing speed and direction, if the difference is less than the
  1253. * value set here, it may happen instantaneously.
  1254. */
  1255. #define CLASSIC_JERK
  1256. #if ENABLED(CLASSIC_JERK)
  1257. #define DEFAULT_XJERK 10.0
  1258. #define DEFAULT_YJERK 10.0
  1259. #define DEFAULT_ZJERK 0.4
  1260. //#define DEFAULT_IJERK 0.3
  1261. //#define DEFAULT_JJERK 0.3
  1262. //#define DEFAULT_KJERK 0.3
  1263. //#define DEFAULT_UJERK 0.3
  1264. //#define DEFAULT_VJERK 0.3
  1265. //#define DEFAULT_WJERK 0.3
  1266.  
  1267. //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
  1268.  
  1269. //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  1270. #if ENABLED(LIMITED_JERK_EDITING)
  1271. #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
  1272. #endif
  1273. #endif
  1274.  
  1275. #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
  1276.  
  1277. /**
  1278. * Junction Deviation Factor
  1279. *
  1280. * See:
  1281. * https://reprap.org/forum/read.php?1,739819
  1282. * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  1283. */
  1284. #if DISABLED(CLASSIC_JERK)
  1285. #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge was .08 defaulted
  1286. #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
  1287. // for small segments (< 1mm) with large junction angles (> 135°).
  1288. #endif
  1289.  
  1290. /**
  1291. * S-Curve Acceleration
  1292. *
  1293. * This option eliminates vibration during printing by fitting a Bézier
  1294. * curve to move acceleration, producing much smoother direction changes.
  1295. *
  1296. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  1297. */
  1298. #define S_CURVE_ACCELERATION
  1299.  
  1300. //===========================================================================
  1301. //============================= Z Probe Options =============================
  1302. //===========================================================================
  1303. // @section probes
  1304.  
  1305. //
  1306. // See https://marlinfw.org/docs/configuration/probes.html
  1307. //
  1308.  
  1309. /**
  1310. * Enable this option for a probe connected to the Z-MIN pin.
  1311. * The probe replaces the Z-MIN endstop and is used for Z homing.
  1312. * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
  1313. */
  1314. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  1315.  
  1316. // Force the use of the probe for Z-axis homing
  1317. #define USE_PROBE_FOR_Z_HOMING
  1318.  
  1319. /**
  1320. * Z_MIN_PROBE_PIN
  1321. *
  1322. * Override this pin only if the probe cannot be connected to
  1323. * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD.
  1324. *
  1325. * - The simplest option is to use a free endstop connector.
  1326. * - Use 5V for powered (usually inductive) sensors.
  1327. *
  1328. * - For simple switches...
  1329. * - Normally-closed (NC) also connect to GND.
  1330. * - Normally-open (NO) also connect to 5V.
  1331. */
  1332. //#define Z_MIN_PROBE_PIN -1
  1333.  
  1334. /**
  1335. * Probe Type
  1336. *
  1337. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  1338. * Activate one of these to use Auto Bed Leveling below.
  1339. */
  1340.  
  1341. /**
  1342. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  1343. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  1344. * or (with LCD_BED_LEVELING) the LCD controller.
  1345. */
  1346. //#define PROBE_MANUALLY
  1347.  
  1348. /**
  1349. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  1350. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  1351. */
  1352. //#define FIX_MOUNTED_PROBE
  1353.  
  1354. /**
  1355. * Use the nozzle as the probe, as with a conductive
  1356. * nozzle system or a piezo-electric smart effector.
  1357. */
  1358. //#define NOZZLE_AS_PROBE
  1359.  
  1360. /**
  1361. * Z Servo Probe, such as an endstop switch on a rotating arm.
  1362. */
  1363. //#define Z_PROBE_SERVO_NR 0
  1364. #ifdef Z_PROBE_SERVO_NR
  1365. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  1366. #endif
  1367.  
  1368. /**
  1369. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  1370. */
  1371. #ifdef B1_USE_BLTOUCH
  1372. #define BLTOUCH
  1373. #endif
  1374.  
  1375. /**
  1376. * MagLev V4 probe by MDD
  1377. *
  1378. * This probe is deployed and activated by powering a built-in electromagnet.
  1379. */
  1380. //#define MAGLEV4
  1381. #if ENABLED(MAGLEV4)
  1382. //#define MAGLEV_TRIGGER_PIN 11 // Set to the connected digital output
  1383. #define MAGLEV_TRIGGER_DELAY 15 // Changing this risks overheating the coil
  1384. #endif
  1385.  
  1386. /**
  1387. * Touch-MI Probe by hotends.fr
  1388. *
  1389. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  1390. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  1391. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  1392. *
  1393. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  1394. * and a minimum Z_HOMING_HEIGHT of 10.
  1395. */
  1396. //#define TOUCH_MI_PROBE
  1397. #if ENABLED(TOUCH_MI_PROBE)
  1398. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  1399. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  1400. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  1401. #endif
  1402.  
  1403. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  1404. //#define SOLENOID_PROBE
  1405.  
  1406. // A sled-mounted probe like those designed by Charles Bell.
  1407. //#define Z_PROBE_SLED
  1408. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  1409.  
  1410. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  1411. //#define RACK_AND_PINION_PROBE
  1412. #if ENABLED(RACK_AND_PINION_PROBE)
  1413. #define Z_PROBE_DEPLOY_X X_MIN_POS
  1414. #define Z_PROBE_RETRACT_X X_MAX_POS
  1415. #endif
  1416.  
  1417. /**
  1418. * Magnetically Mounted Probe
  1419. * For probes such as Euclid, Klicky, Klackender, etc.
  1420. */
  1421. //#define MAG_MOUNTED_PROBE
  1422. #if ENABLED(MAG_MOUNTED_PROBE)
  1423. #define PROBE_DEPLOY_FEEDRATE (133*60) // (mm/min) Probe deploy speed
  1424. #define PROBE_STOW_FEEDRATE (133*60) // (mm/min) Probe stow speed
  1425.  
  1426. #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } } // Move to side Dock & Attach probe
  1427. #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } } // Move probe off dock
  1428. #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
  1429. #define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
  1430. #define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
  1431. #define MAG_MOUNTED_STOW_1 { PROBE_STOW_FEEDRATE, { 245, 114, 20 } } // Move to dock
  1432. #define MAG_MOUNTED_STOW_2 { PROBE_STOW_FEEDRATE, { 245, 114, 0 } } // Place probe beside remover
  1433. #define MAG_MOUNTED_STOW_3 { PROBE_STOW_FEEDRATE, { 230, 114, 0 } } // Side move to remove probe
  1434. #define MAG_MOUNTED_STOW_4 { PROBE_STOW_FEEDRATE, { 210, 114, 20 } } // Side move to remove probe
  1435. #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
  1436. #endif
  1437.  
  1438. // Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector
  1439. // When the pin is defined you can use M672 to set/reset the probe sensitivity.
  1440. //#define DUET_SMART_EFFECTOR
  1441. #if ENABLED(DUET_SMART_EFFECTOR)
  1442. #define SMART_EFFECTOR_MOD_PIN -1 // Connect a GPIO pin to the Smart Effector MOD pin
  1443. #endif
  1444.  
  1445. /**
  1446. * Use StallGuard2 to probe the bed with the nozzle.
  1447. * Requires stallGuard-capable Trinamic stepper drivers.
  1448. * CAUTION: This can damage machines with Z lead screws.
  1449. * Take extreme care when setting up this feature.
  1450. */
  1451. //#define SENSORLESS_PROBING
  1452.  
  1453. /**
  1454. * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe
  1455. * Deploys by touching z-axis belt. Retracts by pushing the probe down.
  1456. */
  1457. //#define Z_PROBE_ALLEN_KEY
  1458. #if ENABLED(Z_PROBE_ALLEN_KEY)
  1459. // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
  1460. // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
  1461.  
  1462. #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 }
  1463. #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE
  1464.  
  1465. #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 }
  1466. #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_FEEDRATE)/10
  1467.  
  1468. #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 }
  1469. #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE
  1470.  
  1471. #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position
  1472. #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE
  1473.  
  1474. #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down
  1475. #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10
  1476.  
  1477. #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear
  1478. #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE
  1479.  
  1480. #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 }
  1481. #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE
  1482.  
  1483. #endif // Z_PROBE_ALLEN_KEY
  1484.  
  1485. /**
  1486. * Nozzle-to-Probe offsets { X, Y, Z }
  1487. *
  1488. * X and Y offset
  1489. * Use a caliper or ruler to measure the distance from the tip of
  1490. * the Nozzle to the center-point of the Probe in the X and Y axes.
  1491. *
  1492. * Z offset
  1493. * - For the Z offset use your best known value and adjust at runtime.
  1494. * - Common probes trigger below the nozzle and have negative values for Z offset.
  1495. * - Probes triggering above the nozzle height are uncommon but do exist. When using
  1496. * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
  1497. * to avoid collisions during probing.
  1498. *
  1499. * Tune and Adjust
  1500. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
  1501. * - PROBE_OFFSET_WIZARD (Configuration_adv.h) can be used for setting the Z offset.
  1502. *
  1503. * Assuming the typical work area orientation:
  1504. * - Probe to RIGHT of the Nozzle has a Positive X offset
  1505. * - Probe to LEFT of the Nozzle has a Negative X offset
  1506. * - Probe in BACK of the Nozzle has a Positive Y offset
  1507. * - Probe in FRONT of the Nozzle has a Negative Y offset
  1508. *
  1509. * Some examples:
  1510. * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, -1 } // Example "1"
  1511. * #define NOZZLE_TO_PROBE_OFFSET {-10, 5, -1 } // Example "2"
  1512. * #define NOZZLE_TO_PROBE_OFFSET { 5, -5, -1 } // Example "3"
  1513. * #define NOZZLE_TO_PROBE_OFFSET {-15,-10, -1 } // Example "4"
  1514. *
  1515. * +-- BACK ---+
  1516. * | [+] |
  1517. * L | 1 | R <-- Example "1" (right+, back+)
  1518. * E | 2 | I <-- Example "2" ( left-, back+)
  1519. * F |[-] N [+]| G <-- Nozzle
  1520. * T | 3 | H <-- Example "3" (right+, front-)
  1521. * | 4 | T <-- Example "4" ( left-, front-)
  1522. * | [-] |
  1523. * O-- FRONT --+
  1524. */
  1525. #define NOZZLE_TO_PROBE_OFFSET { 0, -54, -3.92 }
  1526.  
  1527. // Most probes should stay away from the edges of the bed, but
  1528. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
  1529. #define PROBING_MARGIN 15
  1530.  
  1531. // X and Y axis travel speed (mm/min) between probes
  1532. #define XY_PROBE_FEEDRATE (133*60)
  1533.  
  1534. // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  1535. #define Z_PROBE_FEEDRATE_FAST (4*60)
  1536.  
  1537. // Feedrate (mm/min) for the "accurate" probe of each point
  1538. #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
  1539.  
  1540. /**
  1541. * Probe Activation Switch
  1542. * A switch indicating proper deployment, or an optical
  1543. * switch triggered when the carriage is near the bed.
  1544. */
  1545. //#define PROBE_ACTIVATION_SWITCH
  1546. #if ENABLED(PROBE_ACTIVATION_SWITCH)
  1547. #define PROBE_ACTIVATION_SWITCH_STATE LOW // State indicating probe is active
  1548. //#define PROBE_ACTIVATION_SWITCH_PIN PC6 // Override default pin
  1549. #endif
  1550.  
  1551. /**
  1552. * Tare Probe (determine zero-point) prior to each probe.
  1553. * Useful for a strain gauge or piezo sensor that needs to factor out
  1554. * elements such as cables pulling on the carriage.
  1555. */
  1556. //#define PROBE_TARE
  1557. #if ENABLED(PROBE_TARE)
  1558. #define PROBE_TARE_TIME 200 // (ms) Time to hold tare pin
  1559. #define PROBE_TARE_DELAY 200 // (ms) Delay after tare before
  1560. #define PROBE_TARE_STATE HIGH // State to write pin for tare
  1561. //#define PROBE_TARE_PIN PA5 // Override default pin
  1562. #if ENABLED(PROBE_ACTIVATION_SWITCH)
  1563. //#define PROBE_TARE_ONLY_WHILE_INACTIVE // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
  1564. #endif
  1565. #endif
  1566.  
  1567. /**
  1568. * Probe Enable / Disable
  1569. * The probe only provides a triggered signal when enabled.
  1570. */
  1571. //#define PROBE_ENABLE_DISABLE
  1572. #if ENABLED(PROBE_ENABLE_DISABLE)
  1573. //#define PROBE_ENABLE_PIN -1 // Override the default pin here
  1574. #endif
  1575.  
  1576. /**
  1577. * Multiple Probing
  1578. *
  1579. * You may get improved results by probing 2 or more times.
  1580. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  1581. *
  1582. * A total of 2 does fast/slow probes with a weighted average.
  1583. * A total of 3 or more adds more slow probes, taking the average.
  1584. */
  1585. #ifdef B1_USE_BLTOUCH
  1586. #define MULTIPLE_PROBING 2
  1587. #endif
  1588. //#define EXTRA_PROBING 1
  1589.  
  1590. /**
  1591. * Z probes require clearance when deploying, stowing, and moving between
  1592. * probe points to avoid hitting the bed and other hardware.
  1593. * Servo-mounted probes require extra space for the arm to rotate.
  1594. * Inductive probes need space to keep from triggering early.
  1595. *
  1596. * Use these settings to specify the distance (mm) to raise the probe (or
  1597. * lower the bed). The values set here apply over and above any (negative)
  1598. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  1599. * Only integer values >= 1 are valid here.
  1600. *
  1601. * Example: 'M851 Z-5' with a CLEARANCE of 4 => 9mm from bed to nozzle.
  1602. * But: 'M851 Z+1' with a CLEARANCE of 2 => 2mm from bed to nozzle.
  1603. */
  1604. #define Z_CLEARANCE_DEPLOY_PROBE 10 // (mm) Z Clearance for Deploy/Stow
  1605. #define Z_CLEARANCE_BETWEEN_PROBES 5 // (mm) Z Clearance between probe points
  1606. #define Z_CLEARANCE_MULTI_PROBE 5 // (mm) Z Clearance between multiple probes
  1607. //#define Z_AFTER_PROBING 5 // (mm) Z position after probing is done
  1608.  
  1609. #define Z_PROBE_LOW_POINT -2 // (mm) Farthest distance below the trigger-point to go before stopping
  1610.  
  1611. // For M851 give a range for adjusting the Z probe offset
  1612. #define Z_PROBE_OFFSET_RANGE_MIN -20
  1613. #define Z_PROBE_OFFSET_RANGE_MAX 20
  1614.  
  1615. // Enable the M48 repeatability test to test probe accuracy
  1616. //#define Z_MIN_PROBE_REPEATABILITY_TEST
  1617.  
  1618. // Before deploy/stow pause for user confirmation
  1619. //#define PAUSE_BEFORE_DEPLOY_STOW
  1620. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  1621. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  1622. #endif
  1623.  
  1624. /**
  1625. * Enable one or more of the following if probing seems unreliable.
  1626. * Heaters and/or fans can be disabled during probing to minimize electrical
  1627. * noise. A delay can also be added to allow noise and vibration to settle.
  1628. * These options are most useful for the BLTouch probe, but may also improve
  1629. * readings with inductive probes and piezo sensors.
  1630. */
  1631. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  1632. #if ENABLED(PROBING_HEATERS_OFF)
  1633. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  1634. //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude)
  1635. #endif
  1636. //#define PROBING_FANS_OFF // Turn fans off when probing
  1637. //#define PROBING_ESTEPPERS_OFF // Turn all extruder steppers off when probing
  1638. //#define PROBING_STEPPERS_OFF // Turn all steppers off (unless needed to hold position) when probing (including extruders)
  1639. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  1640.  
  1641. // Require minimum nozzle and/or bed temperature for probing
  1642. //#define PREHEAT_BEFORE_PROBING
  1643. #if ENABLED(PREHEAT_BEFORE_PROBING)
  1644. #define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
  1645. #define PROBING_BED_TEMP 50
  1646. #endif
  1647.  
  1648. // @section stepper drivers
  1649.  
  1650. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  1651. // :{ 0:'Low', 1:'High' }
  1652. #define X_ENABLE_ON 0
  1653. #define Y_ENABLE_ON 0
  1654. #define Z_ENABLE_ON 0
  1655. #define E_ENABLE_ON 0 // For all extruders
  1656. //#define I_ENABLE_ON 0
  1657. //#define J_ENABLE_ON 0
  1658. //#define K_ENABLE_ON 0
  1659. //#define U_ENABLE_ON 0
  1660. //#define V_ENABLE_ON 0
  1661. //#define W_ENABLE_ON 0
  1662.  
  1663. // Disable axis steppers immediately when they're not being stepped.
  1664. // WARNING: When motors turn off there is a chance of losing position accuracy!
  1665. //#define DISABLE_X
  1666. //#define DISABLE_Y
  1667. //#define DISABLE_Z
  1668. //#define DISABLE_I
  1669. //#define DISABLE_J
  1670. //#define DISABLE_K
  1671. //#define DISABLE_U
  1672. //#define DISABLE_V
  1673. //#define DISABLE_W
  1674.  
  1675. // Turn off the display blinking that warns about possible accuracy reduction
  1676. //#define DISABLE_REDUCED_ACCURACY_WARNING
  1677.  
  1678. // @section extruder
  1679.  
  1680. //#define DISABLE_E // Disable the extruder when not stepping
  1681. #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
  1682.  
  1683. // @section motion
  1684.  
  1685. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  1686. #define INVERT_X_DIR true
  1687. #define INVERT_Y_DIR false
  1688. #define INVERT_Z_DIR false
  1689. //#define INVERT_I_DIR false
  1690. //#define INVERT_J_DIR false
  1691. //#define INVERT_K_DIR false
  1692. //#define INVERT_U_DIR false
  1693. //#define INVERT_V_DIR false
  1694. //#define INVERT_W_DIR false
  1695.  
  1696. // @section extruder
  1697.  
  1698. // For direct drive extruder v9 set to true, for geared extruder set to false.
  1699. #define INVERT_E0_DIR true
  1700. #define INVERT_E1_DIR false
  1701. #define INVERT_E2_DIR false
  1702. #define INVERT_E3_DIR false
  1703. #define INVERT_E4_DIR false
  1704. #define INVERT_E5_DIR false
  1705. #define INVERT_E6_DIR false
  1706. #define INVERT_E7_DIR false
  1707.  
  1708. // @section homing
  1709.  
  1710. //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
  1711. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
  1712.  
  1713. /**
  1714. * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled.
  1715. * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed.
  1716. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle.
  1717. */
  1718. //#define Z_IDLE_HEIGHT Z_HOME_POS
  1719.  
  1720. #define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  1721. // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
  1722.  
  1723. #define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
  1724.  
  1725. // Direction of endstops when homing; 1=MAX, -1=MIN
  1726. // :[-1,1]
  1727. #define X_HOME_DIR -1
  1728. #define Y_HOME_DIR -1
  1729. #define Z_HOME_DIR -1
  1730. //#define I_HOME_DIR -1
  1731. //#define J_HOME_DIR -1
  1732. //#define K_HOME_DIR -1
  1733. //#define U_HOME_DIR -1
  1734. //#define V_HOME_DIR -1
  1735. //#define W_HOME_DIR -1
  1736.  
  1737. // @section geometry
  1738.  
  1739. // The size of the printable area
  1740. #define X_BED_SIZE 220
  1741. #define Y_BED_SIZE 280
  1742.  
  1743. // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
  1744. #define X_MIN_POS 0
  1745. #define Y_MIN_POS 0
  1746. #define Z_MIN_POS 0
  1747. #define X_MAX_POS X_BED_SIZE
  1748. #define Y_MAX_POS Y_BED_SIZE + 5
  1749. #define Z_MAX_POS 270
  1750. //#define I_MIN_POS 0
  1751. //#define I_MAX_POS 50
  1752. //#define J_MIN_POS 0
  1753. //#define J_MAX_POS 50
  1754. //#define K_MIN_POS 0
  1755. //#define K_MAX_POS 50
  1756. //#define U_MIN_POS 0
  1757. //#define U_MAX_POS 50
  1758. //#define V_MIN_POS 0
  1759. //#define V_MAX_POS 50
  1760. //#define W_MIN_POS 0
  1761. //#define W_MAX_POS 50
  1762.  
  1763. /**
  1764. * Software Endstops
  1765. *
  1766. * - Prevent moves outside the set machine bounds.
  1767. * - Individual axes can be disabled, if desired.
  1768. * - X and Y only apply to Cartesian robots.
  1769. * - Use 'M211' to set software endstops on/off or report current state
  1770. */
  1771.  
  1772. // Min software endstops constrain movement within minimum coordinate bounds
  1773. #define MIN_SOFTWARE_ENDSTOPS
  1774. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  1775. #define MIN_SOFTWARE_ENDSTOP_X
  1776. #define MIN_SOFTWARE_ENDSTOP_Y
  1777. #ifndef B1_USE_BLTOUCH
  1778. #define MIN_SOFTWARE_ENDSTOP_Z
  1779. #endif
  1780. #define MIN_SOFTWARE_ENDSTOP_I
  1781. #define MIN_SOFTWARE_ENDSTOP_J
  1782. #define MIN_SOFTWARE_ENDSTOP_K
  1783. #define MIN_SOFTWARE_ENDSTOP_U
  1784. #define MIN_SOFTWARE_ENDSTOP_V
  1785. #define MIN_SOFTWARE_ENDSTOP_W
  1786. #endif
  1787.  
  1788. // Max software endstops constrain movement within maximum coordinate bounds
  1789. #define MAX_SOFTWARE_ENDSTOPS
  1790. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  1791. #define MAX_SOFTWARE_ENDSTOP_X
  1792. #define MAX_SOFTWARE_ENDSTOP_Y
  1793. #define MAX_SOFTWARE_ENDSTOP_Z
  1794. #define MAX_SOFTWARE_ENDSTOP_I
  1795. #define MAX_SOFTWARE_ENDSTOP_J
  1796. #define MAX_SOFTWARE_ENDSTOP_K
  1797. #define MAX_SOFTWARE_ENDSTOP_U
  1798. #define MAX_SOFTWARE_ENDSTOP_V
  1799. #define MAX_SOFTWARE_ENDSTOP_W
  1800. #endif
  1801.  
  1802. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  1803. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  1804. #endif
  1805.  
  1806. /**
  1807. * @section filament runout sensors
  1808. *
  1809. * Filament Runout Sensors
  1810. * Mechanical or opto endstops are used to check for the presence of filament.
  1811. *
  1812. * IMPORTANT: Runout will only trigger if Marlin is aware that a print job is running.
  1813. * Marlin knows a print job is running when:
  1814. * 1. Running a print job from media started with M24.
  1815. * 2. The Print Job Timer has been started with M75.
  1816. * 3. The heaters were turned on and PRINTJOB_TIMER_AUTOSTART is enabled.
  1817. *
  1818. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  1819. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  1820. */
  1821. //#define FILAMENT_RUNOUT_SENSOR
  1822. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  1823. #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
  1824. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  1825.  
  1826. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
  1827. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  1828. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
  1829. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
  1830. // This is automatically enabled for MIXING_EXTRUDERs.
  1831.  
  1832. // Override individually if the runout sensors vary
  1833. //#define FIL_RUNOUT1_STATE LOW
  1834. //#define FIL_RUNOUT1_PULLUP
  1835. //#define FIL_RUNOUT1_PULLDOWN
  1836.  
  1837. //#define FIL_RUNOUT2_STATE LOW
  1838. //#define FIL_RUNOUT2_PULLUP
  1839. //#define FIL_RUNOUT2_PULLDOWN
  1840.  
  1841. //#define FIL_RUNOUT3_STATE LOW
  1842. //#define FIL_RUNOUT3_PULLUP
  1843. //#define FIL_RUNOUT3_PULLDOWN
  1844.  
  1845. //#define FIL_RUNOUT4_STATE LOW
  1846. //#define FIL_RUNOUT4_PULLUP
  1847. //#define FIL_RUNOUT4_PULLDOWN
  1848.  
  1849. //#define FIL_RUNOUT5_STATE LOW
  1850. //#define FIL_RUNOUT5_PULLUP
  1851. //#define FIL_RUNOUT5_PULLDOWN
  1852.  
  1853. //#define FIL_RUNOUT6_STATE LOW
  1854. //#define FIL_RUNOUT6_PULLUP
  1855. //#define FIL_RUNOUT6_PULLDOWN
  1856.  
  1857. //#define FIL_RUNOUT7_STATE LOW
  1858. //#define FIL_RUNOUT7_PULLUP
  1859. //#define FIL_RUNOUT7_PULLDOWN
  1860.  
  1861. //#define FIL_RUNOUT8_STATE LOW
  1862. //#define FIL_RUNOUT8_PULLUP
  1863. //#define FIL_RUNOUT8_PULLDOWN
  1864.  
  1865. // Commands to execute on filament runout.
  1866. // With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c")
  1867. // NOTE: After 'M412 H1' the host handles filament runout and this script does not apply.
  1868. #define FILAMENT_RUNOUT_SCRIPT "M600"
  1869.  
  1870. // After a runout is detected, continue printing this length of filament
  1871. // before executing the runout script. Useful for a sensor at the end of
  1872. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  1873. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  1874.  
  1875. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  1876. // Enable this option to use an encoder disc that toggles the runout pin
  1877. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  1878. // large enough to avoid false positives.)
  1879. //#define FILAMENT_MOTION_SENSOR
  1880. #endif
  1881. #endif
  1882.  
  1883. //===========================================================================
  1884. //=============================== Bed Leveling ==============================
  1885. //===========================================================================
  1886. // @section calibrate
  1887.  
  1888. /**
  1889. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  1890. * and behavior of G29 will change depending on your selection.
  1891. *
  1892. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  1893. *
  1894. * - AUTO_BED_LEVELING_3POINT
  1895. * Probe 3 arbitrary points on the bed (that aren't collinear)
  1896. * You specify the XY coordinates of all 3 points.
  1897. * The result is a single tilted plane. Best for a flat bed.
  1898. *
  1899. * - AUTO_BED_LEVELING_LINEAR
  1900. * Probe several points in a grid.
  1901. * You specify the rectangle and the density of sample points.
  1902. * The result is a single tilted plane. Best for a flat bed.
  1903. *
  1904. * - AUTO_BED_LEVELING_BILINEAR
  1905. * Probe several points in a grid.
  1906. * You specify the rectangle and the density of sample points.
  1907. * The result is a mesh, best for large or uneven beds.
  1908. *
  1909. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  1910. * A comprehensive bed leveling system combining the features and benefits
  1911. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  1912. * Validation and Mesh Editing systems.
  1913. *
  1914. * - MESH_BED_LEVELING
  1915. * Probe a grid manually
  1916. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  1917. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  1918. * leveling in steps so you can manually adjust the Z height at each grid-point.
  1919. * With an LCD controller the process is guided step-by-step.
  1920. */
  1921. //#define AUTO_BED_LEVELING_3POINT
  1922. //#define AUTO_BED_LEVELING_LINEAR
  1923. //#define AUTO_BED_LEVELING_UBL
  1924. #ifdef B1_USE_BLTOUCH
  1925. #define AUTO_BED_LEVELING_BILINEAR
  1926. #else
  1927. #define MESH_BED_LEVELING
  1928. #endif
  1929.  
  1930. /**
  1931. * Commands to execute at the end of G29 probing.
  1932. * Useful to retract or move the Z probe out of the way.
  1933. */
  1934. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
  1935.  
  1936. /**
  1937. * Normally G28 leaves leveling disabled on completion. Enable one of
  1938. * these options to restore the prior leveling state or to always enable
  1939. * leveling immediately after G28.
  1940. */
  1941. #define RESTORE_LEVELING_AFTER_G28
  1942. //#define ENABLE_LEVELING_AFTER_G28
  1943.  
  1944. /**
  1945. * Auto-leveling needs preheating
  1946. */
  1947. //#define PREHEAT_BEFORE_LEVELING
  1948. #if ENABLED(PREHEAT_BEFORE_LEVELING)
  1949. #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
  1950. #define LEVELING_BED_TEMP 50
  1951. #endif
  1952.  
  1953. /**
  1954. * Bed Distance Sensor
  1955. *
  1956. * Measures the distance from bed to nozzle with accuracy of 0.01mm.
  1957. * For information about this sensor https://github.com/markniu/Bed_Distance_sensor
  1958. * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C.
  1959. */
  1960. //#define BD_SENSOR
  1961.  
  1962. /**
  1963. * Enable detailed logging of G28, G29, M48, etc.
  1964. * Turn on with the command 'M111 S32'.
  1965. * NOTE: Requires a lot of flash!
  1966. */
  1967. //#define DEBUG_LEVELING_FEATURE
  1968.  
  1969. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY)
  1970. // Set a height for the start of manual adjustment
  1971. #define MANUAL_PROBE_START_Z 0.2 // (mm) Comment out to use the last-measured height
  1972. #endif
  1973.  
  1974. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1975. /**
  1976. * Gradually reduce leveling correction until a set height is reached,
  1977. * at which point movement will be level to the machine's XY plane.
  1978. * The height can be set with M420 Z<height>
  1979. */
  1980. #define ENABLE_LEVELING_FADE_HEIGHT
  1981. #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
  1982. #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height.
  1983. #endif
  1984.  
  1985. /**
  1986. * For Cartesian machines, instead of dividing moves on mesh boundaries,
  1987. * split up moves into short segments like a Delta. This follows the
  1988. * contours of the bed more closely than edge-to-edge straight moves.
  1989. */
  1990. #define SEGMENT_LEVELED_MOVES
  1991. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1992.  
  1993. /**
  1994. * Enable the G26 Mesh Validation Pattern tool.
  1995. */
  1996. //#define G26_MESH_VALIDATION
  1997. #if ENABLED(G26_MESH_VALIDATION)
  1998. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1999. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
  2000. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26.
  2001. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26.
  2002. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves.
  2003. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves.
  2004. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
  2005. #endif
  2006.  
  2007. #endif
  2008.  
  2009. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  2010.  
  2011. // Set the number of grid points per dimension.
  2012. #define GRID_MAX_POINTS_X 4
  2013. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  2014.  
  2015. // Probe along the Y axis, advancing X after each column
  2016. //#define PROBE_Y_FIRST
  2017.  
  2018. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  2019.  
  2020. // Beyond the probed grid, continue the implied tilt?
  2021. // Default is to maintain the height of the nearest edge.
  2022. #define EXTRAPOLATE_BEYOND_GRID
  2023.  
  2024. //
  2025. // Subdivision of the grid by Catmull-Rom method.
  2026. // Synthesizes intermediate points to produce a more detailed mesh.
  2027. //
  2028. //#define ABL_BILINEAR_SUBDIVISION
  2029. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  2030. // Number of subdivisions between probe points
  2031. #define BILINEAR_SUBDIVISIONS 3
  2032. #endif
  2033.  
  2034. #endif
  2035.  
  2036. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  2037.  
  2038. //===========================================================================
  2039. //========================= Unified Bed Leveling ============================
  2040. //===========================================================================
  2041.  
  2042. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  2043.  
  2044. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  2045. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  2046. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  2047.  
  2048. //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points
  2049.  
  2050. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  2051. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  2052.  
  2053. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  2054. // as the Z-Height correction value.
  2055.  
  2056. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh
  2057.  
  2058. #elif ENABLED(MESH_BED_LEVELING)
  2059.  
  2060. //===========================================================================
  2061. //=================================== Mesh ==================================
  2062. //===========================================================================
  2063.  
  2064. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  2065. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  2066. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  2067.  
  2068. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  2069.  
  2070. #endif // BED_LEVELING
  2071.  
  2072. /**
  2073. * Add a bed leveling sub-menu for ABL or MBL.
  2074. * Include a guided procedure if manual probing is enabled.
  2075. */
  2076. #define LCD_BED_LEVELING
  2077.  
  2078. #if ENABLED(LCD_BED_LEVELING)
  2079. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  2080. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  2081. #define MESH_EDIT_MENU // Add a menu to edit mesh points
  2082. #endif
  2083.  
  2084. // Add a menu item to move between bed corners for manual bed adjustment
  2085. #define LCD_BED_TRAMMING
  2086.  
  2087. #if ENABLED(LCD_BED_TRAMMING)
  2088. #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
  2089. #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points
  2090. #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z raise between tramming points
  2091. //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
  2092. //#define BED_TRAMMING_USE_PROBE
  2093. #if ENABLED(BED_TRAMMING_USE_PROBE)
  2094. #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm)
  2095. #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify
  2096. //#define BED_TRAMMING_AUDIO_FEEDBACK
  2097. #endif
  2098.  
  2099. /**
  2100. * Corner Leveling Order
  2101. *
  2102. * Set 2 or 4 points. When 2 points are given, the 3rd is the center of the opposite edge.
  2103. *
  2104. * LF Left-Front RF Right-Front
  2105. * LB Left-Back RB Right-Back
  2106. *
  2107. * Examples:
  2108. *
  2109. * Default {LF,RB,LB,RF} {LF,RF} {LB,LF}
  2110. * LB --------- RB LB --------- RB LB --------- RB LB --------- RB
  2111. * | 4 3 | | 3 2 | | <3> | | 1 |
  2112. * | | | | | | | <3>|
  2113. * | 1 2 | | 1 4 | | 1 2 | | 2 |
  2114. * LF --------- RF LF --------- RF LF --------- RF LF --------- RF
  2115. */
  2116. #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB }
  2117. #endif
  2118.  
  2119. // @section homing
  2120.  
  2121. // The center of the bed is at (X=0, Y=0)
  2122. //#define BED_CENTER_AT_0_0
  2123.  
  2124. // Manually set the home position. Leave these undefined for automatic settings.
  2125. // For DELTA this is the top-center of the Cartesian print volume.
  2126. //#define MANUAL_X_HOME_POS 8
  2127. //#define MANUAL_Y_HOME_POS 0
  2128. //#define MANUAL_Z_HOME_POS 0
  2129. //#define MANUAL_I_HOME_POS 0
  2130. //#define MANUAL_J_HOME_POS 0
  2131. //#define MANUAL_K_HOME_POS 0
  2132. //#define MANUAL_U_HOME_POS 0
  2133. //#define MANUAL_V_HOME_POS 0
  2134. //#define MANUAL_W_HOME_POS 0
  2135.  
  2136. /**
  2137. * Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  2138. *
  2139. * - Moves the Z probe (or nozzle) to a defined XY point before Z homing.
  2140. * - Allows Z homing only when XY positions are known and trusted.
  2141. * - If stepper drivers sleep, XY homing may be required again before Z homing.
  2142. */
  2143. #define Z_SAFE_HOMING
  2144.  
  2145. #if ENABLED(Z_SAFE_HOMING)
  2146. #define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
  2147. #define Z_SAFE_HOMING_Y_POINT Y_CENTER // (mm) Y point for Z homing
  2148. #endif
  2149.  
  2150. // Homing speeds (linear=mm/min, rotational=°/min)
  2151. #define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
  2152.  
  2153. // Validate that endstops are triggered on homing moves
  2154. #define VALIDATE_HOMING_ENDSTOPS
  2155.  
  2156. // @section calibrate
  2157.  
  2158. /**
  2159. * Bed Skew Compensation
  2160. *
  2161. * This feature corrects for misalignment in the XYZ axes.
  2162. *
  2163. * Take the following steps to get the bed skew in the XY plane:
  2164. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  2165. * 2. For XY_DIAG_AC measure the diagonal A to C
  2166. * 3. For XY_DIAG_BD measure the diagonal B to D
  2167. * 4. For XY_SIDE_AD measure the edge A to D
  2168. *
  2169. * Marlin automatically computes skew factors from these measurements.
  2170. * Skew factors may also be computed and set manually:
  2171. *
  2172. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  2173. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  2174. *
  2175. * If desired, follow the same procedure for XZ and YZ.
  2176. * Use these diagrams for reference:
  2177. *
  2178. * Y Z Z
  2179. * ^ B-------C ^ B-------C ^ B-------C
  2180. * | / / | / / | / /
  2181. * | / / | / / | / /
  2182. * | A-------D | A-------D | A-------D
  2183. * +-------------->X +-------------->X +-------------->Y
  2184. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  2185. */
  2186. //#define SKEW_CORRECTION
  2187.  
  2188. #if ENABLED(SKEW_CORRECTION)
  2189. // Input all length measurements here:
  2190. #define XY_DIAG_AC 282.8427124746
  2191. #define XY_DIAG_BD 282.8427124746
  2192. #define XY_SIDE_AD 200
  2193.  
  2194. // Or, set the XY skew factor directly:
  2195. //#define XY_SKEW_FACTOR 0.0
  2196.  
  2197. //#define SKEW_CORRECTION_FOR_Z
  2198. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  2199. #define XZ_DIAG_AC 282.8427124746
  2200. #define XZ_DIAG_BD 282.8427124746
  2201. #define YZ_DIAG_AC 282.8427124746
  2202. #define YZ_DIAG_BD 282.8427124746
  2203. #define YZ_SIDE_AD 200
  2204.  
  2205. // Or, set the Z skew factors directly:
  2206. //#define XZ_SKEW_FACTOR 0.0
  2207. //#define YZ_SKEW_FACTOR 0.0
  2208. #endif
  2209.  
  2210. // Enable this option for M852 to set skew at runtime
  2211. //#define SKEW_CORRECTION_GCODE
  2212. #endif
  2213.  
  2214. //=============================================================================
  2215. //============================= Additional Features ===========================
  2216. //=============================================================================
  2217.  
  2218. // @section eeprom
  2219.  
  2220. /**
  2221. * EEPROM
  2222. *
  2223. * Persistent storage to preserve configurable settings across reboots.
  2224. *
  2225. * M500 - Store settings to EEPROM.
  2226. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  2227. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  2228. */
  2229. #define EEPROM_SETTINGS // Persistent storage with M500 and M501
  2230. //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
  2231. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
  2232. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
  2233. #if ENABLED(EEPROM_SETTINGS)
  2234. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  2235. //#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
  2236. #endif
  2237.  
  2238. // @section host
  2239.  
  2240. //
  2241. // Host Keepalive
  2242. //
  2243. // When enabled Marlin will send a busy status message to the host
  2244. // every couple of seconds when it can't accept commands.
  2245. //
  2246. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  2247. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
  2248. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  2249.  
  2250. // @section units
  2251.  
  2252. //
  2253. // G20/G21 Inch mode support
  2254. //
  2255. //#define INCH_MODE_SUPPORT
  2256.  
  2257. //
  2258. // M149 Set temperature units support
  2259. //
  2260. //#define TEMPERATURE_UNITS_SUPPORT
  2261.  
  2262. // @section temperature
  2263.  
  2264. //
  2265. // Preheat Constants - Up to 10 are supported without changes
  2266. //
  2267. #define PREHEAT_1_LABEL "PLA"
  2268. #define PREHEAT_1_TEMP_HOTEND 205
  2269. #define PREHEAT_1_TEMP_BED 50
  2270. #define PREHEAT_1_TEMP_CHAMBER 35
  2271. #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
  2272.  
  2273. #define PREHEAT_2_LABEL "PETG"
  2274. #define PREHEAT_2_TEMP_HOTEND 215
  2275. #define PREHEAT_2_TEMP_BED 65
  2276. #define PREHEAT_2_TEMP_CHAMBER 35
  2277. #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
  2278.  
  2279. #define PREHEAT_3_LABEL "ABS"
  2280. #define PREHEAT_3_TEMP_HOTEND 240
  2281. #define PREHEAT_3_TEMP_BED 110
  2282. #define PREHEAT_3_TEMP_CHAMBER 35
  2283. #define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255
  2284.  
  2285. /**
  2286. * @section nozzle park
  2287. *
  2288. * Nozzle Park
  2289. *
  2290. * Park the nozzle at the given XYZ position on idle or G27.
  2291. *
  2292. * The "P" parameter controls the action applied to the Z axis:
  2293. *
  2294. * P0 (Default) If Z is below park Z raise the nozzle.
  2295. * P1 Raise the nozzle always to Z-park height.
  2296. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  2297. */
  2298. #define NOZZLE_PARK_FEATURE
  2299.  
  2300. #if ENABLED(NOZZLE_PARK_FEATURE)
  2301. // Specify a park position as { X, Y, Z_raise }
  2302. #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 }
  2303. #define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
  2304. #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
  2305. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  2306. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  2307. #endif
  2308.  
  2309. /**
  2310. * @section nozzle clean
  2311. *
  2312. * Clean Nozzle Feature
  2313. *
  2314. * Adds the G12 command to perform a nozzle cleaning process.
  2315. *
  2316. * Parameters:
  2317. * P Pattern
  2318. * S Strokes / Repetitions
  2319. * T Triangles (P1 only)
  2320. *
  2321. * Patterns:
  2322. * P0 Straight line (default). This process requires a sponge type material
  2323. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  2324. * between the start / end points.
  2325. *
  2326. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  2327. * number of zig-zag triangles to do. "S" defines the number of strokes.
  2328. * Zig-zags are done in whichever is the narrower dimension.
  2329. * For example, "G12 P1 S1 T3" will execute:
  2330. *
  2331. * --
  2332. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  2333. * | | / \ / \ / \ |
  2334. * A | | / \ / \ / \ |
  2335. * | | / \ / \ / \ |
  2336. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  2337. * -- +--------------------------------+
  2338. * |________|_________|_________|
  2339. * T1 T2 T3
  2340. *
  2341. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  2342. * "R" specifies the radius. "S" specifies the stroke count.
  2343. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  2344. *
  2345. * Caveats: The ending Z should be the same as starting Z.
  2346. */
  2347. //#define NOZZLE_CLEAN_FEATURE
  2348.  
  2349. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  2350. // Default number of pattern repetitions
  2351. #define NOZZLE_CLEAN_STROKES 12
  2352.  
  2353. // Default number of triangles
  2354. #define NOZZLE_CLEAN_TRIANGLES 3
  2355.  
  2356. // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } }
  2357. // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }}
  2358. #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } }
  2359. #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } }
  2360.  
  2361. // Circular pattern radius
  2362. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  2363. // Circular pattern circle fragments number
  2364. #define NOZZLE_CLEAN_CIRCLE_FN 10
  2365. // Middle point of circle
  2366. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  2367.  
  2368. // Move the nozzle to the initial position after cleaning
  2369. #define NOZZLE_CLEAN_GOBACK
  2370.  
  2371. // For a purge/clean station that's always at the gantry height (thus no Z move)
  2372. //#define NOZZLE_CLEAN_NO_Z
  2373.  
  2374. // For a purge/clean station mounted on the X axis
  2375. //#define NOZZLE_CLEAN_NO_Y
  2376.  
  2377. // Require a minimum hotend temperature for cleaning
  2378. #define NOZZLE_CLEAN_MIN_TEMP 170
  2379. //#define NOZZLE_CLEAN_HEATUP // Heat up the nozzle instead of skipping wipe
  2380.  
  2381. // Explicit wipe G-code script applies to a G12 with no arguments.
  2382. //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
  2383.  
  2384. #endif
  2385.  
  2386. // @section host
  2387.  
  2388. /**
  2389. * Print Job Timer
  2390. *
  2391. * Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
  2392. * The print job timer will only be stopped if the bed/chamber target temp is
  2393. * below BED_MINTEMP/CHAMBER_MINTEMP.
  2394. *
  2395. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  2396. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  2397. * M140 (bed, no wait) - high temp = none, low temp = stop timer
  2398. * M190 (bed, wait) - high temp = start timer, low temp = none
  2399. * M141 (chamber, no wait) - high temp = none, low temp = stop timer
  2400. * M191 (chamber, wait) - high temp = start timer, low temp = none
  2401. *
  2402. * For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
  2403. * For M140/M190, high temp is anything over BED_MINTEMP.
  2404. * For M141/M191, high temp is anything over CHAMBER_MINTEMP.
  2405. *
  2406. * The timer can also be controlled with the following commands:
  2407. *
  2408. * M75 - Start the print job timer
  2409. * M76 - Pause the print job timer
  2410. * M77 - Stop the print job timer
  2411. */
  2412. #define PRINTJOB_TIMER_AUTOSTART
  2413.  
  2414. // @section stats
  2415.  
  2416. /**
  2417. * Print Counter
  2418. *
  2419. * Track statistical data such as:
  2420. *
  2421. * - Total print jobs
  2422. * - Total successful print jobs
  2423. * - Total failed print jobs
  2424. * - Total time printing
  2425. *
  2426. * View the current statistics with M78.
  2427. */
  2428. //#define PRINTCOUNTER
  2429. #if ENABLED(PRINTCOUNTER)
  2430. #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print.
  2431. #endif
  2432.  
  2433. // @section security
  2434.  
  2435. /**
  2436. * Password
  2437. *
  2438. * Set a numerical password for the printer which can be requested:
  2439. *
  2440. * - When the printer boots up
  2441. * - Upon opening the 'Print from Media' Menu
  2442. * - When SD printing is completed or aborted
  2443. *
  2444. * The following G-codes can be used:
  2445. *
  2446. * M510 - Lock Printer. Blocks all commands except M511.
  2447. * M511 - Unlock Printer.
  2448. * M512 - Set, Change and Remove Password.
  2449. *
  2450. * If you forget the password and get locked out you'll need to re-flash
  2451. * the firmware with the feature disabled, reset EEPROM, and (optionally)
  2452. * re-flash the firmware again with this feature enabled.
  2453. */
  2454. //#define PASSWORD_FEATURE
  2455. #if ENABLED(PASSWORD_FEATURE)
  2456. #define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
  2457. #define PASSWORD_ON_STARTUP
  2458. #define PASSWORD_UNLOCK_GCODE // Unlock with the M511 P<password> command. Disable to prevent brute-force attack.
  2459. #define PASSWORD_CHANGE_GCODE // Change the password with M512 P<old> S<new>.
  2460. //#define PASSWORD_ON_SD_PRINT_MENU // This does not prevent G-codes from running
  2461. //#define PASSWORD_AFTER_SD_PRINT_END
  2462. //#define PASSWORD_AFTER_SD_PRINT_ABORT
  2463. //#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
  2464. #endif
  2465.  
  2466. //=============================================================================
  2467. //============================= LCD and SD support ============================
  2468. //=============================================================================
  2469.  
  2470. // @section interface
  2471.  
  2472. /**
  2473. * LCD LANGUAGE
  2474. *
  2475. * Select the language to display on the LCD. These languages are available:
  2476. *
  2477. * en, an, bg, ca, cz, da, de, el, el_CY, es, eu, fi, fr, gl, hr, hu, it,
  2478. * jp_kana, ko_KR, nl, pl, pt, pt_br, ro, ru, sk, sv, tr, uk, vi, zh_CN, zh_TW
  2479. *
  2480. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek (Greece)', 'el_CY':'Greek (Cyprus)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'hu':'Hungarian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ro':'Romanian', 'ru':'Russian', 'sk':'Slovak', 'sv':'Swedish', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)' }
  2481. */
  2482. #define LCD_LANGUAGE en
  2483.  
  2484. /**
  2485. * LCD Character Set
  2486. *
  2487. * Note: This option is NOT applicable to Graphical Displays.
  2488. *
  2489. * All character-based LCDs provide ASCII plus one of these
  2490. * language extensions:
  2491. *
  2492. * - JAPANESE ... the most common
  2493. * - WESTERN ... with more accented characters
  2494. * - CYRILLIC ... for the Russian language
  2495. *
  2496. * To determine the language extension installed on your controller:
  2497. *
  2498. * - Compile and upload with LCD_LANGUAGE set to 'test'
  2499. * - Click the controller to view the LCD menu
  2500. * - The LCD will display Japanese, Western, or Cyrillic text
  2501. *
  2502. * See https://marlinfw.org/docs/development/lcd_language.html
  2503. *
  2504. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  2505. */
  2506. #define DISPLAY_CHARSET_HD44780 JAPANESE
  2507.  
  2508. /**
  2509. * Info Screen Style (0:Classic, 1:Průša)
  2510. *
  2511. * :[0:'Classic', 1:'Průša']
  2512. */
  2513. #define LCD_INFO_SCREEN_STYLE 0
  2514.  
  2515. /**
  2516. * SD CARD
  2517. *
  2518. * SD Card support is disabled by default. If your controller has an SD slot,
  2519. * you must uncomment the following option or it won't work.
  2520. */
  2521. #define SDSUPPORT
  2522.  
  2523. /**
  2524. * SD CARD: ENABLE CRC
  2525. *
  2526. * Use CRC checks and retries on the SD communication.
  2527. */
  2528. #define SD_CHECK_AND_RETRY
  2529.  
  2530. /**
  2531. * LCD Menu Items
  2532. *
  2533. * Disable all menus and only display the Status Screen, or
  2534. * just remove some extraneous menu items to recover space.
  2535. */
  2536. //#define NO_LCD_MENUS
  2537. //#define SLIM_LCD_MENUS
  2538.  
  2539. //
  2540. // ENCODER SETTINGS
  2541. //
  2542. // This option overrides the default number of encoder pulses needed to
  2543. // produce one step. Should be increased for high-resolution encoders.
  2544. //
  2545. //#define ENCODER_PULSES_PER_STEP 4
  2546.  
  2547. //
  2548. // Use this option to override the number of step signals required to
  2549. // move between next/prev menu items.
  2550. //
  2551. //#define ENCODER_STEPS_PER_MENU_ITEM 1
  2552.  
  2553. /**
  2554. * Encoder Direction Options
  2555. *
  2556. * Test your encoder's behavior first with both options disabled.
  2557. *
  2558. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  2559. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  2560. * Reversed Value Editing only? Enable BOTH options.
  2561. */
  2562.  
  2563. //
  2564. // This option reverses the encoder direction everywhere.
  2565. //
  2566. // Set this option if CLOCKWISE causes values to DECREASE
  2567. //
  2568. //#define REVERSE_ENCODER_DIRECTION
  2569.  
  2570. //
  2571. // This option reverses the encoder direction for navigating LCD menus.
  2572. //
  2573. // If CLOCKWISE normally moves DOWN this makes it go UP.
  2574. // If CLOCKWISE normally moves UP this makes it go DOWN.
  2575. //
  2576. //#define REVERSE_MENU_DIRECTION
  2577.  
  2578. //
  2579. // This option reverses the encoder direction for Select Screen.
  2580. //
  2581. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  2582. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  2583. //
  2584. //#define REVERSE_SELECT_DIRECTION
  2585.  
  2586. //
  2587. // Encoder EMI Noise Filter
  2588. //
  2589. // This option increases encoder samples to filter out phantom encoder clicks caused by EMI noise.
  2590. //
  2591. //#define ENCODER_NOISE_FILTER
  2592. #if ENABLED(ENCODER_NOISE_FILTER)
  2593. #define ENCODER_SAMPLES 10
  2594. #endif
  2595.  
  2596. //
  2597. // Individual Axis Homing
  2598. //
  2599. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  2600. //
  2601. #define INDIVIDUAL_AXIS_HOMING_MENU
  2602. //#define INDIVIDUAL_AXIS_HOMING_SUBMENU
  2603.  
  2604. //
  2605. // SPEAKER/BUZZER
  2606. //
  2607. // If you have a speaker that can produce tones, enable it here.
  2608. // By default Marlin assumes you have a buzzer with a fixed frequency.
  2609. //
  2610. #define SPEAKER
  2611.  
  2612. //
  2613. // The duration and frequency for the UI feedback sound.
  2614. // Set these to 0 to disable audio feedback in the LCD menus.
  2615. //
  2616. // Note: Test audio output with the G-Code:
  2617. // M300 S<frequency Hz> P<duration ms>
  2618. //
  2619. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
  2620. //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
  2621.  
  2622. //=============================================================================
  2623. //======================== LCD / Controller Selection =========================
  2624. //======================== (Character-based LCDs) =========================
  2625. //=============================================================================
  2626. // @section lcd
  2627.  
  2628. //
  2629. // RepRapDiscount Smart Controller.
  2630. // https://reprap.org/wiki/RepRapDiscount_Smart_Controller
  2631. //
  2632. // Note: Usually sold with a white PCB.
  2633. //
  2634. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  2635.  
  2636. //
  2637. // GT2560 (YHCB2004) LCD Display
  2638. //
  2639. // Requires Testato, Koepel softwarewire library and
  2640. // Andriy Golovnya's LiquidCrystal_AIP31068 library.
  2641. //
  2642. //#define YHCB2004
  2643.  
  2644. //
  2645. // Original RADDS LCD Display+Encoder+SDCardReader
  2646. // https://web.archive.org/web/20200719145306/doku.radds.org/dokumentation/lcd-display/
  2647. //
  2648. //#define RADDS_DISPLAY
  2649.  
  2650. //
  2651. // ULTIMAKER Controller.
  2652. //
  2653. //#define ULTIMAKERCONTROLLER
  2654.  
  2655. //
  2656. // ULTIPANEL as seen on Thingiverse.
  2657. //
  2658. //#define ULTIPANEL
  2659.  
  2660. //
  2661. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  2662. // https://reprap.org/wiki/PanelOne
  2663. //
  2664. //#define PANEL_ONE
  2665.  
  2666. //
  2667. // GADGETS3D G3D LCD/SD Controller
  2668. // https://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  2669. //
  2670. // Note: Usually sold with a blue PCB.
  2671. //
  2672. //#define G3D_PANEL
  2673.  
  2674. //
  2675. // RigidBot Panel V1.0
  2676. //
  2677. //#define RIGIDBOT_PANEL
  2678.  
  2679. //
  2680. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  2681. // https://www.aliexpress.com/item/32765887917.html
  2682. //
  2683. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  2684.  
  2685. //
  2686. // ANET and Tronxy 20x4 Controller
  2687. //
  2688. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  2689. // This LCD is known to be susceptible to electrical interference
  2690. // which scrambles the display. Pressing any button clears it up.
  2691. // This is a LCD2004 display with 5 analog buttons.
  2692.  
  2693. //
  2694. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  2695. //
  2696. //#define ULTRA_LCD
  2697.  
  2698. //=============================================================================
  2699. //======================== LCD / Controller Selection =========================
  2700. //===================== (I2C and Shift-Register LCDs) =====================
  2701. //=============================================================================
  2702.  
  2703. //
  2704. // CONTROLLER TYPE: I2C
  2705. //
  2706. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  2707. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  2708. //
  2709.  
  2710. //
  2711. // Elefu RA Board Control Panel
  2712. // https://web.archive.org/web/20140823033947/www.elefu.com/index.php?route=product/product&product_id=53
  2713. //
  2714. //#define RA_CONTROL_PANEL
  2715.  
  2716. //
  2717. // Sainsmart (YwRobot) LCD Displays
  2718. //
  2719. // These require LiquidCrystal_I2C library:
  2720. // https://github.com/MarlinFirmware/New-LiquidCrystal
  2721. // https://github.com/fmalpartida/New-LiquidCrystal/wiki
  2722. //
  2723. //#define LCD_SAINSMART_I2C_1602
  2724. //#define LCD_SAINSMART_I2C_2004
  2725.  
  2726. //
  2727. // Generic LCM1602 LCD adapter
  2728. //
  2729. //#define LCM1602
  2730.  
  2731. //
  2732. // PANELOLU2 LCD with status LEDs,
  2733. // separate encoder and click inputs.
  2734. //
  2735. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  2736. // For more info: https://github.com/lincomatic/LiquidTWI2
  2737. //
  2738. // Note: The PANELOLU2 encoder click input can either be directly connected to
  2739. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  2740. //
  2741. //#define LCD_I2C_PANELOLU2
  2742.  
  2743. //
  2744. // Panucatt VIKI LCD with status LEDs,
  2745. // integrated click & L/R/U/D buttons, separate encoder inputs.
  2746. //
  2747. //#define LCD_I2C_VIKI
  2748.  
  2749. //
  2750. // CONTROLLER TYPE: Shift register panels
  2751. //
  2752.  
  2753. //
  2754. // 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection
  2755. // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD
  2756. //
  2757. //#define SAV_3DLCD
  2758.  
  2759. //
  2760. // 3-wire SR LCD with strobe using 74HC4094
  2761. // https://github.com/mikeshub/SailfishLCD
  2762. // Uses the code directly from Sailfish
  2763. //
  2764. //#define FF_INTERFACEBOARD
  2765.  
  2766. //
  2767. // TFT GLCD Panel with Marlin UI
  2768. // Panel connected to main board by SPI or I2C interface.
  2769. // See https://github.com/Serhiy-K/TFTGLCDAdapter
  2770. //
  2771. //#define TFTGLCD_PANEL_SPI
  2772. //#define TFTGLCD_PANEL_I2C
  2773.  
  2774. //=============================================================================
  2775. //======================= LCD / Controller Selection =======================
  2776. //========================= (Graphical LCDs) ========================
  2777. //=============================================================================
  2778.  
  2779. //
  2780. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  2781. //
  2782. // IMPORTANT: The U8glib library is required for Graphical Display!
  2783. // https://github.com/olikraus/U8glib_Arduino
  2784. //
  2785. // NOTE: If the LCD is unresponsive you may need to reverse the plugs.
  2786. //
  2787.  
  2788. //
  2789. // RepRapDiscount FULL GRAPHIC Smart Controller
  2790. // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  2791. //
  2792. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  2793.  
  2794. //
  2795. // K.3D Full Graphic Smart Controller
  2796. //
  2797. //#define K3D_FULL_GRAPHIC_SMART_CONTROLLER
  2798.  
  2799. //
  2800. // ReprapWorld Graphical LCD
  2801. // https://reprapworld.com/electronics/3d-printer-modules/autonomous-printing/graphical-lcd-screen-v1-0/
  2802. //
  2803. //#define REPRAPWORLD_GRAPHICAL_LCD
  2804.  
  2805. //
  2806. // Activate one of these if you have a Panucatt Devices
  2807. // Viki 2.0 or mini Viki with Graphic LCD
  2808. // https://www.panucatt.com
  2809. //
  2810. //#define VIKI2
  2811. //#define miniVIKI
  2812.  
  2813. //
  2814. // Alfawise Ex8 printer LCD marked as WYH L12864 COG
  2815. //
  2816. //#define WYH_L12864
  2817.  
  2818. //
  2819. // MakerLab Mini Panel with graphic
  2820. // controller and SD support - https://reprap.org/wiki/Mini_panel
  2821. //
  2822. //#define MINIPANEL
  2823.  
  2824. //
  2825. // MaKr3d Makr-Panel with graphic controller and SD support.
  2826. // https://reprap.org/wiki/MaKrPanel
  2827. //
  2828. //#define MAKRPANEL
  2829.  
  2830. //
  2831. // Adafruit ST7565 Full Graphic Controller.
  2832. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  2833. //
  2834. //#define ELB_FULL_GRAPHIC_CONTROLLER
  2835.  
  2836. //
  2837. // BQ LCD Smart Controller shipped by
  2838. // default with the BQ Hephestos 2 and Witbox 2.
  2839. //
  2840. //#define BQ_LCD_SMART_CONTROLLER
  2841.  
  2842. //
  2843. // Cartesio UI
  2844. // https://web.archive.org/web/20180605050442/mauk.cc/webshop/cartesio-shop/electronics/user-interface
  2845. //
  2846. //#define CARTESIO_UI
  2847.  
  2848. //
  2849. // LCD for Melzi Card with Graphical LCD
  2850. //
  2851. //#define LCD_FOR_MELZI
  2852.  
  2853. //
  2854. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  2855. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  2856. //
  2857. //#define ULTI_CONTROLLER
  2858.  
  2859. //
  2860. // MKS MINI12864 with graphic controller and SD support
  2861. // https://reprap.org/wiki/MKS_MINI_12864
  2862. //
  2863. //#define MKS_MINI_12864
  2864.  
  2865. //
  2866. // MKS MINI12864 V3 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.
  2867. //
  2868. //#define MKS_MINI_12864_V3
  2869.  
  2870. //
  2871. // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout.
  2872. // https://www.aliexpress.com/item/33018110072.html
  2873. //
  2874. //#define MKS_LCD12864A
  2875. //#define MKS_LCD12864B
  2876.  
  2877. //
  2878. // FYSETC variant of the MINI12864 graphic controller with SD support
  2879. // https://wiki.fysetc.com/Mini12864_Panel/
  2880. //
  2881. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  2882. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  2883. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  2884. //#define FYSETC_MINI_12864_2_1 // Type A/B. NeoPixel RGB Backlight
  2885. //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
  2886.  
  2887. //
  2888. // BigTreeTech Mini 12864 V1.0 / V2.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.
  2889. // https://github.com/bigtreetech/MINI-12864
  2890. //
  2891. #define BTT_MINI_12864
  2892.  
  2893. //
  2894. // Factory display for Creality CR-10 / CR-7 / Ender-3
  2895. // https://marlinfw.org/docs/hardware/controllers.html#cr10_stockdisplay
  2896. //
  2897. // Connect to EXP1 on RAMPS and compatible boards.
  2898. //
  2899. //#define CR10_STOCKDISPLAY
  2900.  
  2901. //
  2902. // Ender-2 OEM display, a variant of the MKS_MINI_12864
  2903. //
  2904. //#define ENDER2_STOCKDISPLAY
  2905.  
  2906. //
  2907. // ANET and Tronxy Graphical Controller
  2908. //
  2909. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  2910. // A clone of the RepRapDiscount full graphics display but with
  2911. // different pins/wiring (see pins_ANET_10.h). Enable one of these.
  2912. //
  2913. //#define ANET_FULL_GRAPHICS_LCD
  2914. //#define ANET_FULL_GRAPHICS_LCD_ALT_WIRING
  2915.  
  2916. //
  2917. // AZSMZ 12864 LCD with SD
  2918. // https://www.aliexpress.com/item/32837222770.html
  2919. //
  2920. //#define AZSMZ_12864
  2921.  
  2922. //
  2923. // Silvergate GLCD controller
  2924. // https://github.com/android444/Silvergate
  2925. //
  2926. //#define SILVER_GATE_GLCD_CONTROLLER
  2927.  
  2928. //
  2929. // eMotion Tech LCD with SD
  2930. // https://www.reprap-france.com/produit/1234568748-ecran-graphique-128-x-64-points-2-1
  2931. //
  2932. //#define EMOTION_TECH_LCD
  2933.  
  2934. //=============================================================================
  2935. //============================== OLED Displays ==============================
  2936. //=============================================================================
  2937.  
  2938. //
  2939. // SSD1306 OLED full graphics generic display
  2940. //
  2941. //#define U8GLIB_SSD1306
  2942.  
  2943. //
  2944. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  2945. //
  2946. //#define SAV_3DGLCD
  2947. #if ENABLED(SAV_3DGLCD)
  2948. #define U8GLIB_SSD1306
  2949. //#define U8GLIB_SH1106
  2950. #endif
  2951.  
  2952. //
  2953. // TinyBoy2 128x64 OLED / Encoder Panel
  2954. //
  2955. //#define OLED_PANEL_TINYBOY2
  2956.  
  2957. //
  2958. // MKS OLED 1.3" 128×64 Full Graphics Controller
  2959. // https://reprap.org/wiki/MKS_12864OLED
  2960. //
  2961. // Tiny, but very sharp OLED display
  2962. //
  2963. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  2964. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  2965.  
  2966. //
  2967. // Zonestar OLED 128×64 Full Graphics Controller
  2968. //
  2969. //#define ZONESTAR_12864LCD // Graphical (DOGM) with ST7920 controller
  2970. //#define ZONESTAR_12864OLED // 1.3" OLED with SH1106 controller (default)
  2971. //#define ZONESTAR_12864OLED_SSD1306 // 0.96" OLED with SSD1306 controller
  2972.  
  2973. //
  2974. // Einstart S OLED SSD1306
  2975. //
  2976. //#define U8GLIB_SH1106_EINSTART
  2977.  
  2978. //
  2979. // Overlord OLED display/controller with i2c buzzer and LEDs
  2980. //
  2981. //#define OVERLORD_OLED
  2982.  
  2983. //
  2984. // FYSETC OLED 2.42" 128×64 Full Graphics Controller with WS2812 RGB
  2985. // Where to find : https://www.aliexpress.com/item/4000345255731.html
  2986. //#define FYSETC_242_OLED_12864 // Uses the SSD1309 controller
  2987.  
  2988. //
  2989. // K.3D SSD1309 OLED 2.42" 128×64 Full Graphics Controller
  2990. //
  2991. //#define K3D_242_OLED_CONTROLLER // Software SPI
  2992.  
  2993. //=============================================================================
  2994. //========================== Extensible UI Displays ===========================
  2995. //=============================================================================
  2996.  
  2997. /**
  2998. * DGUS Touch Display with DWIN OS. (Choose one.)
  2999. * ORIGIN : https://www.aliexpress.com/item/32993409517.html
  3000. * FYSETC : https://www.aliexpress.com/item/32961471929.html
  3001. * MKS : https://www.aliexpress.com/item/1005002008179262.html
  3002. *
  3003. * Flash display with DGUS Displays for Marlin:
  3004. * - Format the SD card to FAT32 with an allocation size of 4kb.
  3005. * - Download files as specified for your type of display.
  3006. * - Plug the microSD card into the back of the display.
  3007. * - Boot the display and wait for the update to complete.
  3008. *
  3009. * ORIGIN (Marlin DWIN_SET)
  3010. * - Download https://github.com/coldtobi/Marlin_DGUS_Resources
  3011. * - Copy the downloaded DWIN_SET folder to the SD card.
  3012. * - Product: https://www.aliexpress.com/item/32993409517.html
  3013. *
  3014. * FYSETC (Supplier default)
  3015. * - Download https://github.com/FYSETC/FYSTLCD-2.0
  3016. * - Copy the downloaded SCREEN folder to the SD card.
  3017. * - Product: https://www.aliexpress.com/item/32961471929.html
  3018. *
  3019. * HIPRECY (Supplier default)
  3020. * - Download https://github.com/HiPrecy/Touch-Lcd-LEO
  3021. * - Copy the downloaded DWIN_SET folder to the SD card.
  3022. *
  3023. * MKS (MKS-H43) (Supplier default)
  3024. * - Download https://github.com/makerbase-mks/MKS-H43
  3025. * - Copy the downloaded DWIN_SET folder to the SD card.
  3026. * - Product: https://www.aliexpress.com/item/1005002008179262.html
  3027. *
  3028. * RELOADED (T5UID1)
  3029. * - Download https://github.com/Neo2003/DGUS-reloaded/releases
  3030. * - Copy the downloaded DWIN_SET folder to the SD card.
  3031. *
  3032. * Flash display with DGUS Displays for Marlin:
  3033. * - Format the SD card to FAT32 with an allocation size of 4kb.
  3034. * - Download files as specified for your type of display.
  3035. * - Plug the microSD card into the back of the display.
  3036. * - Boot the display and wait for the update to complete.
  3037. */
  3038. //#define DGUS_LCD_UI_ORIGIN
  3039. //#define DGUS_LCD_UI_FYSETC
  3040. //#define DGUS_LCD_UI_HIPRECY
  3041. //#define DGUS_LCD_UI_MKS
  3042. //#define DGUS_LCD_UI_RELOADED
  3043. #if ENABLED(DGUS_LCD_UI_MKS)
  3044. #define USE_MKS_GREEN_UI
  3045. #endif
  3046.  
  3047. //
  3048. // Touch-screen LCD for Malyan M200/M300 printers
  3049. //
  3050. //#define MALYAN_LCD
  3051.  
  3052. //
  3053. // Touch UI for FTDI EVE (FT800/FT810) displays
  3054. // See Configuration_adv.h for all configuration options.
  3055. //
  3056. //#define TOUCH_UI_FTDI_EVE
  3057.  
  3058. //
  3059. // Touch-screen LCD for Anycubic printers
  3060. //
  3061. //#define ANYCUBIC_LCD_I3MEGA
  3062. //#define ANYCUBIC_LCD_CHIRON
  3063. #if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
  3064. //#define ANYCUBIC_LCD_DEBUG
  3065. //#define ANYCUBIC_LCD_GCODE_EXT // Add ".gcode" to menu entries for DGUS clone compatibility
  3066. #endif
  3067.  
  3068. //
  3069. // 320x240 Nextion 2.8" serial TFT Resistive Touch Screen NX3224T028
  3070. //
  3071. //#define NEXTION_TFT
  3072.  
  3073. //
  3074. // Third-party or vendor-customized controller interfaces.
  3075. // Sources should be installed in 'src/lcd/extui'.
  3076. //
  3077. //#define EXTENSIBLE_UI
  3078.  
  3079. #if ENABLED(EXTENSIBLE_UI)
  3080. //#define EXTUI_LOCAL_BEEPER // Enables use of local Beeper pin with external display
  3081. #endif
  3082.  
  3083. //=============================================================================
  3084. //=============================== Graphical TFTs ==============================
  3085. //=============================================================================
  3086.  
  3087. /**
  3088. * Specific TFT Model Presets. Enable one of the following options
  3089. * or enable TFT_GENERIC and set sub-options.
  3090. */
  3091.  
  3092. //
  3093. // 480x320, 3.5", SPI Display with Rotary Encoder from MKS
  3094. // Usually paired with MKS Robin Nano V2 & V3
  3095. // https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35
  3096. //
  3097. //#define MKS_TS35_V2_0
  3098.  
  3099. //
  3100. // 320x240, 2.4", FSMC Display From MKS
  3101. // Usually paired with MKS Robin Nano V1.2
  3102. //
  3103. //#define MKS_ROBIN_TFT24
  3104.  
  3105. //
  3106. // 320x240, 2.8", FSMC Display From MKS
  3107. // Usually paired with MKS Robin Nano V1.2
  3108. //
  3109. //#define MKS_ROBIN_TFT28
  3110.  
  3111. //
  3112. // 320x240, 3.2", FSMC Display From MKS
  3113. // Usually paired with MKS Robin Nano V1.2
  3114. //
  3115. //#define MKS_ROBIN_TFT32
  3116.  
  3117. //
  3118. // 480x320, 3.5", FSMC Display From MKS
  3119. // Usually paired with MKS Robin Nano V1.2
  3120. //
  3121. //#define MKS_ROBIN_TFT35
  3122.  
  3123. //
  3124. // 480x272, 4.3", FSMC Display From MKS
  3125. //
  3126. //#define MKS_ROBIN_TFT43
  3127.  
  3128. //
  3129. // 320x240, 3.2", FSMC Display From MKS
  3130. // Usually paired with MKS Robin
  3131. //
  3132. //#define MKS_ROBIN_TFT_V1_1R
  3133.  
  3134. //
  3135. // 480x320, 3.5", FSMC Stock Display from Tronxy
  3136. //
  3137. //#define TFT_TRONXY_X5SA
  3138.  
  3139. //
  3140. // 480x320, 3.5", FSMC Stock Display from AnyCubic
  3141. //
  3142. //#define ANYCUBIC_TFT35
  3143.  
  3144. //
  3145. // 320x240, 2.8", FSMC Stock Display from Longer/Alfawise
  3146. //
  3147. //#define LONGER_LK_TFT28
  3148.  
  3149. //
  3150. // 320x240, 2.8", FSMC Stock Display from ET4
  3151. //
  3152. //#define ANET_ET4_TFT28
  3153.  
  3154. //
  3155. // 480x320, 3.5", FSMC Stock Display from ET5
  3156. //
  3157. //#define ANET_ET5_TFT35
  3158.  
  3159. //
  3160. // 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX
  3161. // https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware
  3162. //
  3163. //#define BIQU_BX_TFT70
  3164.  
  3165. //
  3166. // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series
  3167. // https://github.com/bigtreetech/TFT35-SPI/tree/master/v1
  3168. //
  3169. //#define BTT_TFT35_SPI_V1_0
  3170.  
  3171. //
  3172. // Generic TFT with detailed options
  3173. //
  3174. //#define TFT_GENERIC
  3175. #if ENABLED(TFT_GENERIC)
  3176. // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ]
  3177. #define TFT_DRIVER AUTO
  3178.  
  3179. // Interface. Enable one of the following options:
  3180. //#define TFT_INTERFACE_FSMC
  3181. //#define TFT_INTERFACE_SPI
  3182.  
  3183. // TFT Resolution. Enable one of the following options:
  3184. //#define TFT_RES_320x240
  3185. //#define TFT_RES_480x272
  3186. //#define TFT_RES_480x320
  3187. //#define TFT_RES_1024x600
  3188. #endif
  3189.  
  3190. /**
  3191. * TFT UI - User Interface Selection. Enable one of the following options:
  3192. *
  3193. * TFT_CLASSIC_UI - Emulated DOGM - 128x64 Upscaled
  3194. * TFT_COLOR_UI - Marlin Default Menus, Touch Friendly, using full TFT capabilities
  3195. * TFT_LVGL_UI - A Modern UI using LVGL
  3196. *
  3197. * For LVGL_UI also copy the 'assets' folder from the build directory to the
  3198. * root of your SD card, together with the compiled firmware.
  3199. */
  3200. //#define TFT_CLASSIC_UI
  3201. //#define TFT_COLOR_UI
  3202. //#define TFT_LVGL_UI
  3203.  
  3204. #if ENABLED(TFT_COLOR_UI)
  3205. //#define TFT_SHARED_IO // SPI is shared between TFT display and other devices. Disable async data transfer
  3206. #endif
  3207.  
  3208. #if ENABLED(TFT_LVGL_UI)
  3209. //#define MKS_WIFI_MODULE // MKS WiFi module
  3210. #endif
  3211.  
  3212. /**
  3213. * TFT Rotation. Set to one of the following values:
  3214. *
  3215. * TFT_ROTATE_90, TFT_ROTATE_90_MIRROR_X, TFT_ROTATE_90_MIRROR_Y,
  3216. * TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  3217. * TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  3218. * TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
  3219. */
  3220. //#define TFT_ROTATION TFT_NO_ROTATION
  3221.  
  3222. //=============================================================================
  3223. //============================ Other Controllers ============================
  3224. //=============================================================================
  3225.  
  3226. //
  3227. // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
  3228. //
  3229. //#define DWIN_CREALITY_LCD // Creality UI
  3230. //#define DWIN_LCD_PROUI // Pro UI by MRiscoC
  3231. //#define DWIN_CREALITY_LCD_JYERSUI // Jyers UI by Jacob Myers
  3232. //#define DWIN_MARLINUI_PORTRAIT // MarlinUI (portrait orientation)
  3233. //#define DWIN_MARLINUI_LANDSCAPE // MarlinUI (landscape orientation)
  3234.  
  3235. //
  3236. // Touch Screen Settings
  3237. //
  3238. //#define TOUCH_SCREEN
  3239. #if ENABLED(TOUCH_SCREEN)
  3240. #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
  3241. #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
  3242.  
  3243. //#define DISABLE_ENCODER // Disable the click encoder, if any
  3244. //#define TOUCH_IDLE_SLEEP_MINS 5 // (minutes) Display Sleep after a period of inactivity. Set with M255 S.
  3245.  
  3246. #define TOUCH_SCREEN_CALIBRATION
  3247.  
  3248. //#define TOUCH_CALIBRATION_X 12316
  3249. //#define TOUCH_CALIBRATION_Y -8981
  3250. //#define TOUCH_OFFSET_X -43
  3251. //#define TOUCH_OFFSET_Y 257
  3252. //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
  3253.  
  3254. #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS)
  3255. #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM
  3256. #endif
  3257.  
  3258. #if ENABLED(TFT_COLOR_UI)
  3259. //#define SINGLE_TOUCH_NAVIGATION
  3260. #endif
  3261. #endif
  3262.  
  3263. //
  3264. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  3265. // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/
  3266. //
  3267. //#define REPRAPWORLD_KEYPAD
  3268. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
  3269.  
  3270. //
  3271. // EasyThreeD ET-4000+ with button input and status LED
  3272. //
  3273. //#define EASYTHREED_UI
  3274.  
  3275. //=============================================================================
  3276. //=============================== Extra Features ==============================
  3277. //=============================================================================
  3278.  
  3279. // @section fans
  3280.  
  3281. // Set number of user-controlled fans. Disable to use all board-defined fans.
  3282. // :[1,2,3,4,5,6,7,8]
  3283. //#define NUM_M106_FANS 1
  3284.  
  3285. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  3286. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  3287. // is too low, you should also increment SOFT_PWM_SCALE.
  3288. //#define FAN_SOFT_PWM
  3289.  
  3290. // Incrementing this by 1 will double the software PWM frequency,
  3291. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  3292. // However, control resolution will be halved for each increment;
  3293. // at zero value, there are 128 effective control positions.
  3294. // :[0,1,2,3,4,5,6,7]
  3295. #define SOFT_PWM_SCALE 0
  3296.  
  3297. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  3298. // be used to mitigate the associated resolution loss. If enabled,
  3299. // some of the PWM cycles are stretched so on average the desired
  3300. // duty cycle is attained.
  3301. //#define SOFT_PWM_DITHER
  3302.  
  3303. // @section extras
  3304.  
  3305. // Support for the BariCUDA Paste Extruder
  3306. //#define BARICUDA
  3307.  
  3308. // @section lights
  3309.  
  3310. // Temperature status LEDs that display the hotend and bed temperature.
  3311. // If all hotends, bed temperature, and target temperature are under 54C
  3312. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  3313. //#define TEMP_STAT_LEDS
  3314.  
  3315. // Support for BlinkM/CyzRgb
  3316. //#define BLINKM
  3317.  
  3318. // Support for PCA9632 PWM LED driver
  3319. //#define PCA9632
  3320.  
  3321. // Support for PCA9533 PWM LED driver
  3322. //#define PCA9533
  3323.  
  3324. /**
  3325. * RGB LED / LED Strip Control
  3326. *
  3327. * Enable support for an RGB LED connected to 5V digital pins, or
  3328. * an RGB Strip connected to MOSFETs controlled by digital pins.
  3329. *
  3330. * Adds the M150 command to set the LED (or LED strip) color.
  3331. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  3332. * luminance values can be set from 0 to 255.
  3333. * For NeoPixel LED an overall brightness parameter is also available.
  3334. *
  3335. * === CAUTION ===
  3336. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  3337. * as the Arduino cannot handle the current the LEDs will require.
  3338. * Failure to follow this precaution can destroy your Arduino!
  3339. *
  3340. * NOTE: A separate 5V power supply is required! The NeoPixel LED needs
  3341. * more current than the Arduino 5V linear regulator can produce.
  3342. *
  3343. * Requires PWM frequency between 50 <> 100Hz (Check HAL or variant)
  3344. * Use FAST_PWM_FAN, if possible, to reduce fan noise.
  3345. */
  3346.  
  3347. // LED Type. Enable only one of the following two options:
  3348. //#define RGB_LED
  3349. //#define RGBW_LED
  3350.  
  3351. #if EITHER(RGB_LED, RGBW_LED)
  3352. //#define RGB_LED_R_PIN 34
  3353. //#define RGB_LED_G_PIN 43
  3354. //#define RGB_LED_B_PIN 35
  3355. //#define RGB_LED_W_PIN -1
  3356. #endif
  3357.  
  3358. #if ANY(RGB_LED, RGBW_LED, PCA9632)
  3359. //#define RGB_STARTUP_TEST // For PWM pins, fade between all colors
  3360. #if ENABLED(RGB_STARTUP_TEST)
  3361. #define RGB_STARTUP_TEST_INNER_MS 10 // (ms) Reduce or increase fading speed
  3362. #endif
  3363. #endif
  3364.  
  3365. // Support for Adafruit NeoPixel LED driver
  3366. #define NEOPIXEL_LED
  3367. #if ENABLED(NEOPIXEL_LED)
  3368. #define NEOPIXEL_TYPE NEO_RGB // NEO_GRBW, NEO_RGBW, NEO_GRB, NEO_RBG, etc.
  3369. // See https://github.com/adafruit/Adafruit_NeoPixel/blob/master/Adafruit_NeoPixel.h
  3370. //#define NEOPIXEL_PIN 4 // LED driving pin
  3371. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  3372. //#define NEOPIXEL2_PIN 5
  3373. #define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
  3374. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  3375. #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255)
  3376. #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  3377.  
  3378. // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
  3379. //#define NEOPIXEL2_SEPARATE
  3380. #if ENABLED(NEOPIXEL2_SEPARATE)
  3381. #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip
  3382. #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255)
  3383. #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup
  3384. #define NEOPIXEL_M150_DEFAULT -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
  3385. #else
  3386. //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel
  3387. #endif
  3388.  
  3389. // Use some of the NeoPixel LEDs for static (background) lighting
  3390. //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED
  3391. //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED
  3392. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  3393. //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off
  3394. #endif
  3395.  
  3396. /**
  3397. * Printer Event LEDs
  3398. *
  3399. * During printing, the LEDs will reflect the printer status:
  3400. *
  3401. * - Gradually change from blue to violet as the heated bed gets to target temp
  3402. * - Gradually change from violet to red as the hotend gets to temperature
  3403. * - Change to white to illuminate work surface
  3404. * - Change to green once print has finished
  3405. * - Turn off after the print has finished and the user has pushed a button
  3406. */
  3407. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  3408. #define PRINTER_EVENT_LEDS
  3409. #endif
  3410.  
  3411. // @section servos
  3412.  
  3413. /**
  3414. * Number of servos
  3415. *
  3416. * For some servo-related options NUM_SERVOS will be set automatically.
  3417. * Set this manually if there are extra servos needing manual control.
  3418. * Set to 0 to turn off servo support.
  3419. */
  3420. //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
  3421.  
  3422. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
  3423. // 300ms is a good value but you can try less delay.
  3424. // If the servo can't reach the requested position, increase it.
  3425. #define SERVO_DELAY { 300 }
  3426.  
  3427. // Only power servos during movement, otherwise leave off to prevent jitter
  3428. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  3429.  
  3430. // Edit servo angles with M281 and save to EEPROM with M500
  3431. //#define EDITABLE_SERVO_ANGLES
  3432.  
  3433. // Disable servo with M282 to reduce power consumption, noise, and heat when not in use
  3434. //#define SERVO_DETACH_GCODE
  3435.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!