Guest User

Untitled

a guest
May 25th, 2026
91
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.35 KB | None | 0 0
  1. smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.17.9-1-pve] (local build)
  2. Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Ultrastar (He10/12)
  6. Device Model: WDC WD140EDFZ-11A0VA0
  7. Serial Number: QBJ6ATKT
  8. LU WWN Device Id: 5 000cca 2a3df11bf
  9. Firmware Version: 81.00A81
  10. User Capacity: 14,000,519,643,136 bytes [14.0 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database 7.5/5706
  15. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Mon May 25 16:01:21 2026 EDT
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x80) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 101) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: (1714) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0004 135 135 054 Old_age Offline - 112
  61. 3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 374 (Average 402)
  62. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 123
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000a 100 100 001 Old_age Always - 0
  65. 8 Seek_Time_Performance 0x0004 133 133 020 Old_age Offline - 18
  66. 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 40041
  67. 10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 110
  69. 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1750
  71. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1750
  72. 194 Temperature_Celsius 0x0002 051 051 000 Old_age Always - 32 (Min/Max 18/55)
  73. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  74. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 2
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 2 occurred at disk power-on lifetime: 39029 hours (1626 days + 5 hours)
  95. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. 60 08 00 c8 dd a1 40 08 8d+21:40:40.511 READ FPDMA QUEUED
  106. 60 08 f0 c0 dd a1 40 08 8d+21:40:37.642 READ FPDMA QUEUED
  107. 60 08 e8 b8 dd a1 40 08 8d+21:40:37.642 READ FPDMA QUEUED
  108. 60 08 e0 b0 dd a1 40 08 8d+21:40:37.642 READ FPDMA QUEUED
  109. 60 08 d8 a8 dd a1 40 08 8d+21:40:37.642 READ FPDMA QUEUED
  110.  
  111. Error 1 occurred at disk power-on lifetime: 39029 hours (1626 days + 5 hours)
  112. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. 60 98 08 68 dd a1 40 08 8d+21:40:37.553 READ FPDMA QUEUED
  123. 60 48 00 20 d8 a1 40 08 8d+21:40:34.658 READ FPDMA QUEUED
  124. 60 c0 f8 60 d5 a1 40 08 8d+21:40:34.658 READ FPDMA QUEUED
  125. 60 60 b8 00 d0 a1 40 08 8d+21:40:34.658 READ FPDMA QUEUED
  126. 60 98 b0 68 cd a1 40 08 8d+21:40:34.647 READ FPDMA QUEUED
  127.  
  128. SMART Self-test log structure revision number 1
  129. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  130. # 1 Extended offline Completed without error 00% 38843 -
  131. # 2 Short offline Completed without error 00% 35806 -
  132. # 3 Extended offline Completed without error 00% 35452 -
  133. # 4 Short offline Completed without error 00% 35425 -
  134. # 5 Short offline Completed: read failure 90% 35188 -
  135. # 6 Extended offline Completed: read failure 10% 35066 -
  136. # 7 Short offline Completed: read failure 10% 34929 -
  137. # 8 Short offline Completed: read failure 40% 34760 -
  138. # 9 Extended offline Completed: read failure 10% 34710 -
  139. #10 Short offline Completed: read failure 40% 34591 -
  140. #11 Short offline Completed without error 00% 34423 -
  141. #12 Short offline Completed without error 00% 34255 -
  142. #13 Short offline Completed without error 00% 34087 -
  143. #14 Extended offline Completed without error 00% 33971 -
  144. #15 Short offline Completed without error 00% 33919 -
  145. #16 Short offline Completed without error 00% 33751 -
  146. #17 Short offline Completed without error 00% 33583 -
  147. #18 Short offline Completed without error 00% 33415 -
  148. #19 Extended offline Completed without error 00% 33251 -
  149. #20 Short offline Completed without error 00% 33079 -
  150. #21 Short offline Completed without error 00% 32911 -
  151. 6 of 6 failed self-tests are outdated by newer successful extended offline self-test # 1
  152.  
  153. SMART Selective self-test log data structure revision number 1
  154. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  155. 1 0 0 Not_testing
  156. 2 0 0 Not_testing
  157. 3 0 0 Not_testing
  158. 4 0 0 Not_testing
  159. 5 0 0 Not_testing
  160. Selective self-test flags (0x0):
  161. After scanning selected spans, do NOT read-scan remainder of disk.
  162. If Selective self-test is pending on power-up, resume after 0 minute delay.
  163.  
  164. The above only provides legacy SMART information - try 'smartctl -x' for more
  165.  
Advertisement
Add Comment
Please, Sign In to add comment